blob: 7fa9d149cc3811019feee8eb9e8ba871f1544970 [file] [log] [blame]
/*
* FreeRTOS+UDP V1.0.3 (C) 2014 Real Time Engineers ltd.
* All rights reserved
*
* This file is part of the FreeRTOS+UDP distribution. The FreeRTOS+UDP license
* terms are different to the FreeRTOS license terms.
*
* FreeRTOS+UDP uses a dual license model that allows the software to be used
* under a pure GPL open source license (as opposed to the modified GPL license
* under which FreeRTOS is distributed) or a commercial license. Details of
* both license options follow:
*
* - Open source licensing -
* FreeRTOS+UDP is a free download and may be used, modified, evaluated and
* distributed without charge provided the user adheres to version two of the
* GNU General Public License (GPL) and does not remove the copyright notice or
* this text. The GPL V2 text is available on the gnu.org web site, and on the
* following URL: http://www.FreeRTOS.org/gpl-2.0.txt.
*
* - Commercial licensing -
* Businesses and individuals that for commercial or other reasons cannot comply
* with the terms of the GPL V2 license must obtain a commercial license before
* incorporating FreeRTOS+UDP into proprietary software for distribution in any
* form. Commercial licenses can be purchased from http://shop.freertos.org/udp
* and do not require any source files to be changed.
*
* FreeRTOS+UDP is distributed in the hope that it will be useful. You cannot
* use FreeRTOS+UDP unless you agree that you use the software 'as is'.
* FreeRTOS+UDP is provided WITHOUT ANY WARRANTY; without even the implied
* warranties of NON-INFRINGEMENT, MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. Real Time Engineers Ltd. disclaims all conditions and terms, be they
* implied, expressed, or statutory.
*
* 1 tab == 4 spaces!
*
* http://www.FreeRTOS.org
* http://www.FreeRTOS.org/udp
*
*/
/* Standard includes. */
#include <stdint.h>
#include <limits.h>
/* FreeRTOS includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"
#include "semphr.h"
/* FreeRTOS+UDP includes. */
#include "FreeRTOS_UDP_IP.h"
#include "FreeRTOS_IP_Private.h"
#include "FreeRTOS_Sockets.h"
#include "NetworkBufferManagement.h"
/* Demo includes. */
#include "NetworkInterface.h"
/* If a packet cannot be sent immediately then the task performing the send
operation will be held in the Blocked state (so other tasks can execute) for
niTX_BUFFER_FREE_WAIT ticks. It will do this a maximum of niMAX_TX_ATTEMPTS
before giving up. */
#define niTX_BUFFER_FREE_WAIT ( ( portTickType ) 2UL / portTICK_RATE_MS )
#define niMAX_TX_ATTEMPTS ( 5 )
/*-----------------------------------------------------------*/
/*
* A deferred interrupt handler task that processes received frames.
*/
static void prvGMACDeferredInterruptHandlerTask( void *pvParameters );
/*
* Called by the ASF GMAC driver when a packet is received.
*/
static void prvGMACRxCallback( uint32_t ulStatus );
/*-----------------------------------------------------------*/
/* The queue used to communicate Ethernet events to the IP task. */
extern xQueueHandle xNetworkEventQueue;
/* The semaphore used to wake the deferred interrupt handler task when an Rx
interrupt is received. */
static xSemaphoreHandle xGMACRxEventSemaphore = NULL;
/* The GMAC driver instance. */
static gmac_device_t xGMACStruct;
/*-----------------------------------------------------------*/
portBASE_TYPE xNetworkInterfaceInitialise( void )
{
gmac_options_t xGMACOptions;
extern uint8_t ucMACAddress[ 6 ];
const portTickType xPHYDelay_400ms = 400UL;
portBASE_TYPE xReturn = pdFALSE;
/* Ensure PHY is ready. */
vTaskDelay( xPHYDelay_400ms / portTICK_RATE_MS );
/* Enable GMAC clock. */
pmc_enable_periph_clk( ID_GMAC );
/* Fill in GMAC options */
xGMACOptions.uc_copy_all_frame = 0;
xGMACOptions.uc_no_boardcast = 0;
memcpy( xGMACOptions.uc_mac_addr, ucMACAddress, sizeof( ucMACAddress ) );
xGMACStruct.p_hw = GMAC;
/* Init GMAC driver structure. */
gmac_dev_init( GMAC, &xGMACStruct, &xGMACOptions );
/* Init MAC PHY driver. */
if( ethernet_phy_init( GMAC, BOARD_GMAC_PHY_ADDR, sysclk_get_cpu_hz() ) == GMAC_OK )
{
/* Auto Negotiate, work in RMII mode. */
if( ethernet_phy_auto_negotiate( GMAC, BOARD_GMAC_PHY_ADDR ) == GMAC_OK )
{
/* Establish Ethernet link. */
vTaskDelay( xPHYDelay_400ms * 2UL );
if( ethernet_phy_set_link( GMAC, BOARD_GMAC_PHY_ADDR, 1 ) == GMAC_OK )
{
/* Create the event semaphore if it has not already been
created. */
if( xGMACRxEventSemaphore == NULL )
{
xGMACRxEventSemaphore = xSemaphoreCreateCounting( ULONG_MAX, 0 );
#if ipconfigINCLUDE_EXAMPLE_FREERTOS_PLUS_TRACE_CALLS == 1
{
/* If the trace recorder code is included name the semaphore for
viewing in FreeRTOS+Trace. */
vTraceSetQueueName( xGMACRxEventSemaphore, "MAC_RX" );
}
#endif /* ipconfigINCLUDE_EXAMPLE_FREERTOS_PLUS_TRACE_CALLS == 1 */
}
/* Register the callbacks. */
gmac_dev_set_rx_callback( &xGMACStruct, prvGMACRxCallback );
/* The Rx deferred interrupt handler task is created at the
highest possible priority to ensure the interrupt handler can
return directly to it no matter which task was running when the
interrupt occurred. */
xTaskCreate( prvGMACDeferredInterruptHandlerTask,/* The function that implements the task. */
"MACTsk",
configMINIMAL_STACK_SIZE, /* Stack allocated to the task (defined in words, not bytes). */
NULL, /* The task parameter is not used. */
configMAX_PRIORITIES - 1, /* The priority assigned to the task. */
NULL ); /* The handle is not required, so NULL is passed. */
/* Enable the interrupt and set its priority as configured.
THIS DRIVER REQUIRES configMAC_INTERRUPT_PRIORITY TO BE DEFINED,
PREFERABLY IN FreeRTOSConfig.h. */
NVIC_SetPriority( GMAC_IRQn, configMAC_INTERRUPT_PRIORITY );
NVIC_EnableIRQ( GMAC_IRQn );
xReturn = pdPASS;
}
}
}
return xReturn;
}
/*-----------------------------------------------------------*/
static void prvGMACRxCallback( uint32_t ulStatus )
{
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
/* Unblock the deferred interrupt handler task if the event was an Rx. */
if( ulStatus == GMAC_RSR_REC )
{
xSemaphoreGiveFromISR( xGMACRxEventSemaphore, &xHigherPriorityTaskWoken );
}
portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
}
/*-----------------------------------------------------------*/
portBASE_TYPE xNetworkInterfaceOutput( xNetworkBufferDescriptor_t * const pxNetworkBuffer )
{
portBASE_TYPE xReturn = pdFAIL;
int32_t x;
/* Attempt to obtain access to a Tx descriptor. */
for( x = 0; x < niMAX_TX_ATTEMPTS; x++ )
{
if( gmac_dev_write( &xGMACStruct, pxNetworkBuffer->pucEthernetBuffer, ( uint32_t ) pxNetworkBuffer->xDataLength, NULL ) == GMAC_OK )
{
/* The Tx has been initiated. */
xReturn = pdPASS;
break;
}
else
{
iptraceWAITING_FOR_TX_DMA_DESCRIPTOR();
vTaskDelay( niTX_BUFFER_FREE_WAIT );
}
}
/* Finished with the network buffer. */
vNetworkBufferRelease( pxNetworkBuffer );
return xReturn;
}
/*-----------------------------------------------------------*/
void GMAC_Handler( void )
{
gmac_handler( &xGMACStruct );
}
/*-----------------------------------------------------------*/
static void prvGMACDeferredInterruptHandlerTask( void *pvParameters )
{
xNetworkBufferDescriptor_t *pxNetworkBuffer;
xIPStackEvent_t xRxEvent = { eEthernetRxEvent, NULL };
static const portTickType xBufferWaitDelay = 1500UL / portTICK_RATE_MS;
uint32_t ulReturned;
( void ) pvParameters;
configASSERT( xGMACRxEventSemaphore );
for( ;; )
{
/* Wait for the GMAC interrupt to indicate that another packet has been
received. The while() loop is only needed if INCLUDE_vTaskSuspend is
set to 0 in FreeRTOSConfig.h. If INCLUDE_vTaskSuspend is set to 1
then portMAX_DELAY would be an indefinite block time and
xSemaphoreTake() would only return when the semaphore was actually
obtained. */
while( xSemaphoreTake( xGMACRxEventSemaphore, portMAX_DELAY ) == pdFALSE );
/* Allocate a buffer to hold the data. */
pxNetworkBuffer = pxNetworkBufferGet( ipTOTAL_ETHERNET_FRAME_SIZE, xBufferWaitDelay );
if( pxNetworkBuffer != NULL )
{
/* At least one packet has been received. */
ulReturned = gmac_dev_read( &xGMACStruct, pxNetworkBuffer->pucEthernetBuffer, ipTOTAL_ETHERNET_FRAME_SIZE, ( uint32_t * ) &( pxNetworkBuffer->xDataLength ) );
if( ulReturned == GMAC_OK )
{
#if ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES == 1
{
if( pxNetworkBuffer->xDataLength > 0 )
{
/* If the frame would not be processed by the IP stack then
don't even bother sending it to the IP stack. */
if( eConsiderFrameForProcessing( pxNetworkBuffer->pucEthernetBuffer ) != eProcessBuffer )
{
pxNetworkBuffer->xDataLength = 0;
}
}
}
#endif
if( pxNetworkBuffer->xDataLength > 0 )
{
/* Store a pointer to the network buffer structure in the
padding space that was left in front of the Ethernet frame.
The pointer is needed to ensure the network buffer structure
can be located when it is time for it to be freed if the
Ethernet frame gets used as a zero copy buffer. */
*( ( xNetworkBufferDescriptor_t ** ) ( ( pxNetworkBuffer->pucEthernetBuffer - ipBUFFER_PADDING ) ) ) = pxNetworkBuffer;
/* Data was received and stored. Send it to the IP task
for processing. */
xRxEvent.pvData = ( void * ) pxNetworkBuffer;
if( xQueueSendToBack( xNetworkEventQueue, &xRxEvent, ( portTickType ) 0 ) == pdFALSE )
{
/* The buffer could not be sent to the IP task so the
buffer must be released. */
vNetworkBufferRelease( pxNetworkBuffer );
iptraceETHERNET_RX_EVENT_LOST();
}
else
{
iptraceNETWORK_INTERFACE_RECEIVE();
}
}
else
{
/* The buffer does not contain any data so there is no
point sending it to the IP task. Just release it. */
vNetworkBufferRelease( pxNetworkBuffer );
iptraceETHERNET_RX_EVENT_LOST();
}
}
else
{
vNetworkBufferRelease( pxNetworkBuffer );
iptraceETHERNET_RX_EVENT_LOST();
}
}
else
{
/* Left a frame in the driver as a buffer was not available. */
gmac_dev_reset( &xGMACStruct );
}
}
}
/*-----------------------------------------------------------*/