/**********************************************************************
* $Id$		lpc18xx_ssp.c		2011-06-02
*//**
* @file		lpc18xx_ssp.c
* @brief	Contains all functions support for SSP firmware library on LPC18xx
* @version	1.0
* @date		02. June. 2011
* @author	NXP MCU SW Application Team
*
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**********************************************************************/

/* Peripheral group ----------------------------------------------------------- */
/** @addtogroup SSP
 * @{
 */

/* Includes ------------------------------------------------------------------- */
#include "lpc18xx_ssp.h"
#include "lpc18xx_cgu.h"

/* If this source file built with example, the LPC18xx FW library configuration
 * file in each example directory ("lpc18xx_libcfg.h") must be included,
 * otherwise the default FW library configuration file must be included instead
 */
#ifdef __BUILD_WITH_EXAMPLE__
#include "lpc18xx_libcfg.h"
#else
#include "lpc18xx_libcfg_default.h"
#endif /* __BUILD_WITH_EXAMPLE__ */


#ifdef _SSP

/* Public Functions ----------------------------------------------------------- */
/** @addtogroup SSP_Private_Functions
 * @{
 */

/**
 * @}
 */

/* Public Functions ----------------------------------------------------------- */
/** @addtogroup SSP_Public_Functions
 * @{
 */

/********************************************************************//**
 * @brief		Initializes the SSPx peripheral according to the specified
 *              parameters in the SSP_ConfigStruct.
 * @param[in]	SSPx SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	SSP_ConfigStruct Pointer to a SSP_CFG_Type structure that
 * 				contains the configuration information for the specified
 * 				SSP peripheral.
 * @return 		None
 *********************************************************************/
void SSP_Init(LPC_SSPn_Type *SSPx, SSP_CFG_Type *SSP_ConfigStruct)
{
	uint32_t tmp;
	uint32_t prescale, cr0_div, cmp_clk, ssp_clk;

	CHECK_PARAM(PARAM_SSPx(SSPx));

	if(SSPx == LPC_SSP0) {
		/* Set up clock and power for SSP0 module */
		//LPC_CGU->BASE_SSP0_CLK = (SRC_PL160M_0<<24) | (1<<11);
		CGU_EntityConnect(CGU_CLKSRC_PLL1, CGU_BASE_SSP0);
	} else if(SSPx == LPC_SSP1) {
		/* Set up clock and power for SSP1 module */
		//LPC_CGU->BASE_SSP1_CLK = (SRC_PL160M_0<<24) | (1<<11);
		CGU_EntityConnect(CGU_CLKSRC_PLL1, CGU_BASE_SSP1);
	} else {
		return;
	}

	/* Configure SSP, interrupt is disable, LoopBack mode is disable,
	 * SSP is disable, Slave output is disable as default
	 */
	tmp = ((SSP_ConfigStruct->CPHA) | (SSP_ConfigStruct->CPOL) \
		| (SSP_ConfigStruct->FrameFormat) | (SSP_ConfigStruct->Databit))
		& SSP_CR0_BITMASK;
	// write back to SSP control register
	SSPx->CR0 = tmp;

	tmp = SSP_ConfigStruct->Mode & SSP_CR1_BITMASK;
	// Write back to CR1
	SSPx->CR1 = tmp;

	// Set clock rate for SSP peripheral
	if(SSPx == LPC_SSP0)
		ssp_clk = CGU_GetPCLKFrequency(CGU_PERIPHERAL_SSP0);
	else
		ssp_clk = CGU_GetPCLKFrequency(CGU_PERIPHERAL_SSP1);
	cr0_div = 0;
	cmp_clk = 0xFFFFFFFF;
	prescale = 2;
	while (cmp_clk > SSP_ConfigStruct->ClockRate)
	{
		cmp_clk = ssp_clk / ((cr0_div + 1) * prescale);
		if (cmp_clk > SSP_ConfigStruct->ClockRate)
		{
			cr0_div++;
			if (cr0_div > 0xFF)
			{
				cr0_div = 0;
				prescale += 2;
			}
		}
	}

    /* Write computed prescaler and divider back to register */
    SSPx->CR0 &= (~SSP_CR0_SCR(0xFF)) & SSP_CR0_BITMASK;
    SSPx->CR0 |= (SSP_CR0_SCR(cr0_div)) & SSP_CR0_BITMASK;
    SSPx->CPSR = prescale & SSP_CPSR_BITMASK;
}

/*********************************************************************//**
 * @brief		De-initializes the SSPx peripheral registers to their
 *              default reset values.
 * @param[in]	SSPx SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @return 		None
 **********************************************************************/
void SSP_DeInit(LPC_SSPn_Type* SSPx)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));

	/* Disable SSP operation*/
	SSPx->CR1 &= (~SSP_CR1_SSP_EN) & SSP_CR1_BITMASK;
}

/*****************************************************************************//**
 * @brief		Get data size bit selected
 * @param[in]	SSPx pointer to LPC_SSPn_Type structure, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @return		Data size, could be:
 *					- SSP_DATABIT_4		:4 bit transfer
 *					- SSP_DATABIT_5		:5 bit transfer
 *					...
 *					- SSP_DATABIT_16	:16 bit transfer
*******************************************************************************/
uint8_t SSP_GetDataSize(LPC_SSPn_Type* SSPx)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	return (SSPx->CR0 & (0xF));
}

/*****************************************************************************//**
 * @brief		Fills each SSP_InitStruct member with its default value:
 * 					- CPHA = SSP_CPHA_FIRST
 * 					- CPOL = SSP_CPOL_HI
 * 					- ClockRate = 1000000
 * 					- Databit = SSP_DATABIT_8
 * 					- Mode = SSP_MASTER_MODE
 * 					- FrameFormat = SSP_FRAME_SSP
 * @param[in]	SSP_InitStruct Pointer to a SSP_CFG_Type structure which will be
 * 				initialized.
 * @return		None
 *******************************************************************************/
void SSP_ConfigStructInit(SSP_CFG_Type *SSP_InitStruct)
{
	SSP_InitStruct->CPHA = SSP_CPHA_FIRST;
	SSP_InitStruct->CPOL = SSP_CPOL_HI;
	SSP_InitStruct->ClockRate = 100000;
	SSP_InitStruct->Databit = SSP_DATABIT_8;
	SSP_InitStruct->Mode = SSP_MASTER_MODE;
	SSP_InitStruct->FrameFormat = SSP_FRAME_SPI;
}


/*********************************************************************//**
 * @brief		Enable or disable SSP peripheral's operation
 * @param[in]	SSPx	SSP peripheral, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	NewState New State of SSPx peripheral's operation, should be:
 * 					- ENABLE
 * 					- DISABLE
 * @return 		none
 **********************************************************************/
void SSP_Cmd(LPC_SSPn_Type* SSPx, FunctionalState NewState)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));

	if (NewState == ENABLE)
	{
		SSPx->CR1 |= SSP_CR1_SSP_EN;
	}
	else
	{
		SSPx->CR1 &= (~SSP_CR1_SSP_EN) & SSP_CR1_BITMASK;
	}
}

/*********************************************************************//**
 * @brief		Enable or disable Loop Back mode function in SSP peripheral
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	NewState	New State of Loop Back mode, should be:
 * 					- ENABLE
 * 					- DISABLE
 * @return 		None
 **********************************************************************/
void SSP_LoopBackCmd(LPC_SSPn_Type* SSPx, FunctionalState NewState)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));

	if (NewState == ENABLE)
	{
		SSPx->CR1 |= SSP_CR1_LBM_EN;
	}
	else
	{
		SSPx->CR1 &= (~SSP_CR1_LBM_EN) & SSP_CR1_BITMASK;
	}
}

/*********************************************************************//**
 * @brief		Enable or disable Slave Output function in SSP peripheral
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	NewState	New State of Slave Output function, should be:
 * 					- ENABLE	:Slave Output in normal operation
 * 					- DISABLE	:Slave Output is disabled. This blocks
 * 					SSP controller from driving the transmit data line (MISO)
 * Note: 		This function is available when SSP peripheral in Slave mode
 * @return 		None
 **********************************************************************/
void SSP_SlaveOutputCmd(LPC_SSPn_Type* SSPx, FunctionalState NewState)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));

	if (NewState == ENABLE)
	{
		SSPx->CR1 &= (~SSP_CR1_SO_DISABLE) & SSP_CR1_BITMASK;
	}
	else
	{
		SSPx->CR1 |= SSP_CR1_SO_DISABLE;
	}
}

/*********************************************************************//**
 * @brief		Transmit a single data through SSPx peripheral
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	Data	Data to transmit (must be 16 or 8-bit long, this
 * 				depend on SSP data bit number configured)
 * @return 		none
 **********************************************************************/
void SSP_SendData(LPC_SSPn_Type* SSPx, uint16_t Data)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));

	SSPx->DR = SSP_DR_BITMASK(Data);
}



/*********************************************************************//**
 * @brief		Receive a single data from SSPx peripheral
 * @param[in]	SSPx	SSP peripheral selected, should be
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @return 		Data received (16-bit long)
 **********************************************************************/
uint16_t SSP_ReceiveData(LPC_SSPn_Type* SSPx)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));

	return ((uint16_t) (SSP_DR_BITMASK(SSPx->DR)));
}

/*********************************************************************//**
 * @brief 		SSP Read write data function
 * @param[in]	SSPx 	Pointer to SSP peripheral, should be
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	dataCfg	Pointer to a SSP_DATA_SETUP_Type structure that
 * 				contains specified information about transmit data
 * 				configuration.
 * @param[in]	xfType	Transfer type, should be:
 * 					- SSP_TRANSFER_POLLING		:Polling mode
 * 					- SSP_TRANSFER_INTERRUPT	:Interrupt mode
 * @return 		Actual Data length has been transferred in polling mode.
 * 				In interrupt mode, always return (0)
 * 				Return (-1) if error.
 * Note: This function can be used in both master and slave mode.
 ***********************************************************************/
int32_t SSP_ReadWrite (LPC_SSPn_Type *SSPx, SSP_DATA_SETUP_Type *dataCfg, \
						SSP_TRANSFER_Type xfType)
{
	uint8_t *rdata8;
    uint8_t *wdata8;
	uint16_t *rdata16;
    uint16_t *wdata16;
    uint32_t stat;
    uint32_t tmp;
    int32_t dataword;

    dataCfg->rx_cnt = 0;
    dataCfg->tx_cnt = 0;
    dataCfg->status = 0;


	/* Clear all remaining data in RX FIFO */
	while (SSPx->SR & SSP_SR_RNE){
		tmp = (uint32_t) SSP_ReceiveData(SSPx);
	}

	// Clear status
	SSPx->ICR = SSP_ICR_BITMASK;
	if(SSP_GetDataSize(SSPx)>8)
		dataword = 1;
	else dataword = 0;

	// Polling mode ----------------------------------------------------------------------
	if (xfType == SSP_TRANSFER_POLLING){
		if (dataword == 0){
			rdata8 = (uint8_t *)dataCfg->rx_data;
			wdata8 = (uint8_t *)dataCfg->tx_data;
		} else {
			rdata16 = (uint16_t *)dataCfg->rx_data;
			wdata16 = (uint16_t *)dataCfg->tx_data;
		}
		while ((dataCfg->tx_cnt < dataCfg->length) || (dataCfg->rx_cnt < dataCfg->length)){
			if ((SSPx->SR & SSP_SR_TNF) && (dataCfg->tx_cnt != dataCfg->length)){
				// Write data to buffer
				if(dataCfg->tx_data == NULL){
					if (dataword == 0){
						SSP_SendData(SSPx, 0xFF);
						dataCfg->tx_cnt++;
					} else {
						SSP_SendData(SSPx, 0xFFFF);
						dataCfg->tx_cnt += 2;
					}
				} else {
					if (dataword == 0){
						SSP_SendData(SSPx, *wdata8);
						wdata8++;
						dataCfg->tx_cnt++;
					} else {
						SSP_SendData(SSPx, *wdata16);
						wdata16++;
						dataCfg->tx_cnt += 2;
					}
				}
			}

			// Check overrun error
			if ((stat = SSPx->RIS) & SSP_RIS_ROR){
				// save status and return
				dataCfg->status = stat | SSP_STAT_ERROR;
				return (-1);
			}

			// Check for any data available in RX FIFO
			while ((SSPx->SR & SSP_SR_RNE) && (dataCfg->rx_cnt < dataCfg->length)){
				// Read data from SSP data
				tmp = SSP_ReceiveData(SSPx);

				// Store data to destination
				if (dataCfg->rx_data != NULL)
				{
					if (dataword == 0){
						*(rdata8) = (uint8_t) tmp;
						rdata8++;
					} else {
						*(rdata16) = (uint16_t) tmp;
						rdata16++;
					}
				}
				// Increase counter
				if (dataword == 0){
					dataCfg->rx_cnt++;
				} else {
					dataCfg->rx_cnt += 2;
				}
			}
		}

		// save status
		dataCfg->status = SSP_STAT_DONE;

		if (dataCfg->tx_data != NULL){
			return dataCfg->tx_cnt;
		} else if (dataCfg->rx_data != NULL){
			return dataCfg->rx_cnt;
		} else {
			return (0);
		}
	}

	// Interrupt mode ----------------------------------------------------------------------
	else if (xfType == SSP_TRANSFER_INTERRUPT){

		while ((SSPx->SR & SSP_SR_TNF) && (dataCfg->tx_cnt < dataCfg->length)){
			// Write data to buffer
			if(dataCfg->tx_data == NULL){
				if (dataword == 0){
					SSP_SendData(SSPx, 0xFF);
					dataCfg->tx_cnt++;
				} else {
					SSP_SendData(SSPx, 0xFFFF);
					dataCfg->tx_cnt += 2;
				}
			} else {
				if (dataword == 0){
					SSP_SendData(SSPx, (*(uint8_t *)((uint32_t)dataCfg->tx_data + dataCfg->tx_cnt)));
					dataCfg->tx_cnt++;
				} else {
					SSP_SendData(SSPx, (*(uint16_t *)((uint32_t)dataCfg->tx_data + dataCfg->tx_cnt)));
					dataCfg->tx_cnt += 2;
				}
			}

			// Check error
			if ((stat = SSPx->RIS) & SSP_RIS_ROR){
				// save status and return
				dataCfg->status = stat | SSP_STAT_ERROR;
				return (-1);
			}

			// Check for any data available in RX FIFO
			while ((SSPx->SR & SSP_SR_RNE) && (dataCfg->rx_cnt < dataCfg->length)){
				// Read data from SSP data
				tmp = SSP_ReceiveData(SSPx);

				// Store data to destination
				if (dataCfg->rx_data != NULL)
				{
					if (dataword == 0){
						*(uint8_t *)((uint32_t)dataCfg->rx_data + dataCfg->rx_cnt) = (uint8_t) tmp;
					} else {
						*(uint16_t *)((uint32_t)dataCfg->rx_data + dataCfg->rx_cnt) = (uint16_t) tmp;
					}
				}
				// Increase counter
				if (dataword == 0){
					dataCfg->rx_cnt++;
				} else {
					dataCfg->rx_cnt += 2;
				}
			}
		}

		// If there more data to sent or receive
		if ((dataCfg->rx_cnt != dataCfg->length) || (dataCfg->tx_cnt < dataCfg->length)){
			// Enable all interrupt
			SSPx->IMSC = SSP_IMSC_BITMASK;
		} else {
			// Save status
			dataCfg->status = SSP_STAT_DONE;
		}
		return (0);
	}

	return (-1);
}

/*********************************************************************//**
 * @brief		Checks whether the specified SSP status flag is set or not
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	FlagType	Type of flag to check status, should be:
 *					- SSP_STAT_TXFIFO_EMPTY		:TX FIFO is empty
 *					- SSP_STAT_TXFIFO_NOTFULL	:TX FIFO is not full
 *					- SSP_STAT_RXFIFO_NOTEMPTY	:RX FIFO is not empty
 *					- SSP_STAT_RXFIFO_FULL		:RX FIFO is full
 *					- SSP_STAT_BUSY				:SSP peripheral is busy
 * @return		New State of specified SSP status flag
 **********************************************************************/
FlagStatus SSP_GetStatus(LPC_SSPn_Type* SSPx, uint32_t FlagType)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_SSP_STAT(FlagType));

	return ((SSPx->SR & FlagType) ? SET : RESET);
}

/*********************************************************************//**
 * @brief		Enable or disable specified interrupt type in SSP peripheral
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	IntType	Interrupt type in SSP peripheral, should be:
 * 					- SSP_INTCFG_ROR	:Receive Overrun interrupt
 * 					- SSP_INTCFG_RT		:Receive Time out interrupt
 * 					- SSP_INTCFG_RX		:RX FIFO is at least half full interrupt
 * 					- SSP_INTCFG_TX		:TX FIFO is at least half empty interrupt
 * @param[in]	NewState New State of specified interrupt type, should be:
 * 					- ENABLE	:Enable this interrupt type
 * 					- DISABLE	:Disable this interrupt type
 * @return		None
 **********************************************************************/
void SSP_IntConfig(LPC_SSPn_Type *SSPx, uint32_t IntType, FunctionalState NewState)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_SSP_INTCFG(IntType));

	if (NewState == ENABLE)
	{
		SSPx->IMSC |= IntType;
	}
	else
	{
		SSPx->IMSC &= (~IntType) & SSP_IMSC_BITMASK;
	}
}

/*********************************************************************//**
 * @brief	Check whether the specified Raw interrupt status flag is
 * 			set or not
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	RawIntType	Raw Interrupt Type, should be:
 * 					- SSP_INTSTAT_RAW_ROR	:Receive Overrun interrupt
 * 					- SSP_INTSTAT_RAW_RT	:Receive Time out interrupt
 * 					- SSP_INTSTAT_RAW_RX	:RX FIFO is at least half full interrupt
 * 					- SSP_INTSTAT_RAW_TX	:TX FIFO is at least half empty interrupt
 * @return	New State of specified Raw interrupt status flag in SSP peripheral
 * Note: Enabling/Disabling specified interrupt in SSP peripheral does not
 * 		effect to Raw Interrupt Status flag.
 **********************************************************************/
IntStatus SSP_GetRawIntStatus(LPC_SSPn_Type *SSPx, uint32_t RawIntType)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_SSP_INTSTAT_RAW(RawIntType));

	return ((SSPx->RIS & RawIntType) ? SET : RESET);
}


/*********************************************************************//**
 * @brief		Check whether the specified interrupt status flag is
 * 				set or not
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	IntType	Raw Interrupt Type, should be:
 * 					- SSP_INTSTAT_ROR	:Receive Overrun interrupt
 * 					- SSP_INTSTAT_RT	:Receive Time out interrupt
 * 					- SSP_INTSTAT_RX	:RX FIFO is at least half full interrupt
 * 					- SSP_INTSTAT_TX	:TX FIFO is at least half empty interrupt
 * @return	New State of specified interrupt status flag in SSP peripheral
 * Note: Enabling/Disabling specified interrupt in SSP peripheral effects
 * 			to Interrupt Status flag.
 **********************************************************************/
IntStatus SSP_GetIntStatus (LPC_SSPn_Type *SSPx, uint32_t IntType)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_SSP_INTSTAT(IntType));

	return ((SSPx->MIS & IntType) ? SET :RESET);
}

/*********************************************************************//**
 * @brief		Clear specified interrupt pending in SSP peripheral
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	IntType	Interrupt pending to clear, should be:
 * 					- SSP_INTCLR_ROR	:clears the "frame was received when
 * 					RxFIFO was full" interrupt.
 * 					- SSP_INTCLR_RT		:clears the "Rx FIFO was not empty and
 * 					has not been read for a timeout period" interrupt.
 * @return		None
 **********************************************************************/
void SSP_ClearIntPending(LPC_SSPn_Type *SSPx, uint32_t IntType)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_SSP_INTCLR(IntType));

	SSPx->ICR = IntType;
}

/*********************************************************************//**
 * @brief		Enable/Disable DMA function for SSP peripheral
 * @param[in]	SSPx	SSP peripheral selected, should be:
 * 				 	- LPC_SSP0	:SSP0 peripheral
 * 					- LPC_SSP1	:SSP1 peripheral
 * @param[in]	DMAMode	Type of DMA, should be:
 * 					- SSP_DMA_TX	:DMA for the transmit FIFO
 * 					- SSP_DMA_RX	:DMA for the Receive FIFO
 * @param[in]	NewState	New State of DMA function on SSP peripheral,
 * 						should be:
 * 					- ENALBE	:Enable this function
 * 					- DISABLE	:Disable this function
 * @return		None
 **********************************************************************/
void SSP_DMACmd(LPC_SSPn_Type *SSPx, uint32_t DMAMode, FunctionalState NewState)
{
	CHECK_PARAM(PARAM_SSPx(SSPx));
	CHECK_PARAM(PARAM_SSP_DMA(DMAMode));
	CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));

	if (NewState == ENABLE)
	{
		SSPx->DMACR |= DMAMode;
	}
	else
	{
		SSPx->DMACR &= (~DMAMode) & SSP_DMA_BITMASK;
	}
}

/**
 * @}
 */

#endif /* _SSP */

/**
 * @}
 */

/* --------------------------------- End Of File ------------------------------ */