blob: 3f42ec322900c7ba608482615b802781490bf1c8 [file] [log] [blame]
/******************************************************************************
* AVR32 AT32UC3A0128 XLINK command file for AVR32 IAR C/C++ Compiler.
*
* The assumed memory layout is the one of the AT32UC3A0128:
*
* Start Stop Name Type
* ---------- ---------- ----- --------------
* 0x00000000 0x00007FFF SRAM RAM
* 0x80000000 0x8001FFFF FLASH FLASH
*
* Usage: xlink your_file(s) -f xcl-file libraries
*
* - Compiler: IAR EWAVR32
* - Supported devices: AVR32 AT32UC3A0128
*
* - author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
******************************************************************************/
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of ATMEL may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/************************************************************************/
/* The following segments are defined in this link file: */
/* */
/* Code segments */
/* CODE32 -- Program code used by __code32 functions. */
/* RESET -- Reset code. */
/* EVSEG -- Exception vector handlers. */
/* */
/* Constant segments */
/* INITTAB -- Segment initializer table. */
/* DIFUNCT -- Dynamic initialization vector used by C++. */
/* SWITCH -- Switch tables. */
/* ACTAB -- Table of pointers to acall functions. */
/* */
/* DATA21_ID -- Initialization data for DATA21_I. */
/* DATA32_ID -- Initialization data for DATA32_I. */
/* DATA32_C -- Constant __data32 data. */
/* */
/* CHECKSUM -- Checksum segment. */
/* */
/* Data segments */
/* DATA21_I -- Initialized __data21 data with non-zero */
/* initial value. */
/* DATA32_I -- Initialized __data32 data with non-zero */
/* initial value. */
/* DATA21_Z -- Initialized __data21 data with zero initial value. */
/* DATA32_Z -- Initialized __data32 data with zero initial value. */
/* DATA21_N -- Non-initialized __data21. */
/* DATA32_N -- Non-initialized __data32. */
/* SSTACK -- The system stack. */
/* CSTACK -- The application stack. */
/* HEAP -- The heap used by malloc and free. */
/* */
/************************************************************************/
/************************************************************************/
/* Define CPU */
/************************************************************************/
-cavr32
// Declare the IPR0 memory location
-DIPR0=FFFF0800
/************************************************************************/
/* Reset code is located at address 0x80000000 and up. */
/************************************************************************/
-Z(CODE)RESET=80000000-8001FFFF
/************************************************************************/
/* The exception handler code is located at address 0x80000000 */
/* and up. Make sure that the exception table gets properly */
/* allocated. By using the special -Z@ allocation primitive, the */
/* placement is guaranteed to be at _EVBASE and onwards. */
/************************************************************************/
-Z@(CODE)EVTAB=80004000-8001FFFF
-Z@(CODE)EV100=80004100-8001FFFF
-P(CODE)EVSEG=80004000-8001FFFF
/************************************************************************/
/* Allocate code and const segments. */
/************************************************************************/
-P(CODE)CODE32=80000000-8001FFFF
-P(CONST)DATA32_C=80000000-8001FFFF
// Initializers
-Z(CONST)INITTAB,DIFUNCT=80000000-8001FFFF
-Z(CONST)CHECKSUM,SWITCH=80000000-8001FFFF
-Z(CONST)DATA21_ID,DATA32_ID=80000000-8001FFFF
-Z(CONST)ACTAB,HTAB=80000000-8001FFFF
/************************************************************************/
/* Allocate the read/write segments that are mapped to RAM. */
/************************************************************************/
-Z(DATA)DATA21_I,DATA21_Z,DATA21_N=00000004-00007FFF
-Z(DATA)DATA32_I,DATA32_Z,DATA32_N=00000004-00007FFF
-Z(DATA)TRACEBUFFER=00000004-00007FFF
-Z(DATA)SSTACK+_SSTACK_SIZE#00000004-00007FFF
-Z(DATA)CSTACK+_CSTACK_SIZE#00000004-00007FFF
-Z(DATA)HEAP+_HEAP_SIZE=00000004-00007FFF
/************************************************************************/
/* End of File */
/************************************************************************/