FreeRTOS/Demo/CORTEX_ATSAM3X_Atmel_Studio/src/asf/common/boards/board.h - nest-detect/1.0.2/freertos - Git at Google

 /**
  * \file
  *
  * \brief Standard board header file.
  *
  * This file includes the appropriate board header file according to the
  * defined board (parameter BOARD).
  *
  * Copyright (c) 2009-2012 Atmel Corporation. All rights reserved.
  *
  * \asf_license_start
  *
  * \page License
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * 1. Redistributions of source code must retain the above copyright notice,
  *    this list of conditions and the following disclaimer.
  *
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  *    this list of conditions and the following disclaimer in the documentation
  *    and/or other materials provided with the distribution.
  *
  * 3. The name of Atmel may not be used to endorse or promote products derived
  *    from this software without specific prior written permission.
  *
  * 4. This software may only be redistributed and used in connection with an
  *    Atmel microcontroller product.
  *
  * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
  * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  *
  * \asf_license_stop
  *
  */

 #ifndef _BOARD_H_
 #define _BOARD_H_

 /**
  * \defgroup group_common_boards Generic board support
  *
  * The generic board support module includes board-specific definitions
  * and function prototypes, such as the board initialization function.
  *
  * \{
  */

 #include "compiler.h"

 #ifdef __cplusplus
 extern "C" {
 #endif


 /*! \name Base Boards
  */
 //! @{
 #define EVK1100               1   //!< AT32UC3A EVK1100 board.
 #define EVK1101               2   //!< AT32UC3B EVK1101 board.
 #define UC3C_EK               3   //!< AT32UC3C UC3C_EK board.
 #define EVK1104               4   //!< AT32UC3A3 EVK1104 board.
 #define EVK1105               5   //!< AT32UC3A EVK1105 board.
 #define STK600_RCUC3L0        6   //!< STK600 RCUC3L0 board.
 #define UC3L_EK               7   //!< AT32UC3L-EK board.
 #define XPLAIN                8   //!< ATxmega128A1 Xplain board.
 #define STK600_RC064X         10  //!< ATxmega256A3 STK600 board.
 #define STK600_RC100X         11  //!< ATxmega128A1 STK600 board.
 #define UC3_A3_XPLAINED       13  //!< ATUC3A3 UC3-A3 Xplained board.
 #define UC3_L0_XPLAINED       15  //!< ATUC3L0 UC3-L0 Xplained board.
 #define STK600_RCUC3D         16  //!< STK600 RCUC3D board.
 #define STK600_RCUC3C0        17  //!< STK600 RCUC3C board.
 #define XMEGA_B1_XPLAINED     18  //!< ATxmega128B1 Xplained board.
 #define XMEGA_A1_XPLAINED     19  //!< ATxmega128A1 Xplain-A1 board.
 #define STK600_RCUC3L4        21  //!< ATUCL4 STK600 board
 #define UC3_L0_XPLAINED_BC    22  //!< ATUC3L0 UC3-L0 Xplained board controller board
 #define MEGA1284P_XPLAINED_BC 23  //!< ATmega1284P-Xplained board controller board
 #define STK600_RC044X         24  //!< STK600 with RC044X routing card board.
 #define STK600_RCUC3B0        25  //!< STK600 RCUC3B0 board.
 #define UC3_L0_QT600          26  //!< QT600 UC3L0 MCU board.
 #define XMEGA_A3BU_XPLAINED   27  //!< ATxmega256A3BU Xplained board.
 #define STK600_RC064X_LCDX    28  //!< XMEGAB3 STK600 RC064X LCDX board.
 #define STK600_RC100X_LCDX    29  //!< XMEGAB1 STK600 RC100X LCDX board.
 #define UC3B_BOARD_CONTROLLER 30  //!< AT32UC3B1 board controller for Atmel boards
 #define RZ600                 31  //!< AT32UC3A RZ600 MCU board
 #define SAM3S_EK              32  //!< SAM3S-EK board.
 #define SAM3U_EK              33  //!< SAM3U-EK board.
 #define SAM3X_EK              34  //!< SAM3X-EK board.
 #define SAM3N_EK              35  //!< SAM3N-EK board.
 #define SAM3S_EK2             36  //!< SAM3S-EK2 board.
 #define SAM4S_EK              37  //!< SAM4S-EK board.
 #define STK600_RCUC3A0        38  //!< STK600 RCUC3A0 board.
 #define STK600_MEGA           39  //!< STK600 MEGA board.
 #define MEGA_1284P_XPLAINED   40  //!< ATmega1284P Xplained board.
 #define SAM4S_XPLAINED        41  //!< SAM4S Xplained board.
 #define ATXMEGA128A1_QT600    42  //!< QT600 ATXMEGA128A1 MCU board.
 #define ARDUINO_DUE_X         43  //!< Arduino Due/X board.
 #define STK600_RCUC3L3        44  //!< ATUCL3 STK600 board
 #define SIMULATOR_XMEGA_A1    97  //!< Simulator for XMEGA A1 devices
 #define AVR_SIMULATOR_UC3     98  //!< AVR SIMULATOR for AVR UC3 device family.
 #define USER_BOARD            99  //!< User-reserved board (if any).
 #define DUMMY_BOARD          100  //!< Dummy board to support board-independent applications (e.g. bootloader)
 //! @}

 /*! \name Extension Boards
  */
 //! @{
 #define EXT1102                      1  //!< AT32UC3B EXT1102 board
 #define MC300                        2  //!< AT32UC3 MC300 board
 #define SENSORS_XPLAINED_INERTIAL_1  3  //!< Xplained inertial sensor board 1
 #define SENSORS_XPLAINED_INERTIAL_2  4  //!< Xplained inertial sensor board 2
 #define SENSORS_XPLAINED_PRESSURE_1  5  //!< Xplained pressure sensor board
 #define SENSORS_XPLAINED_LIGHTPROX_1 6  //!< Xplained light & proximity sensor board
 #define SENSORS_XPLAINED_INERTIAL_A1 7  //!< Xplained inertial sensor board "A"
 #define RZ600_AT86RF231              8  //!< AT86RF231 RF board in RZ600
 #define RZ600_AT86RF230B             9  //!< AT86RF231 RF board in RZ600
 #define RZ600_AT86RF212             10  //!< AT86RF231 RF board in RZ600
 #define SENSORS_XPLAINED_BREADBOARD 11  //!< Xplained sensor development breadboard
 #define SECURITY_XPLAINED           12  //!< Xplained ATSHA204 board
 #define USER_EXT_BOARD              99  //!< User-reserved extension board (if any).
 //! @}

 #if BOARD == EVK1100
 #  include "evk1100/evk1100.h"
 #elif BOARD == EVK1101
 #  include "evk1101/evk1101.h"
 #elif BOARD == UC3C_EK
 #  include "uc3c_ek/uc3c_ek.h"
 #elif BOARD == EVK1104
 #  include "evk1104/evk1104.h"
 #elif BOARD == EVK1105
 #  include "evk1105/evk1105.h"
 #elif BOARD == STK600_RCUC3L0
 #  include "stk600/rcuc3l0/stk600_rcuc3l0.h"
 #elif BOARD == UC3L_EK
 #  include "uc3l_ek/uc3l_ek.h"
 #elif BOARD == STK600_RCUC3L4
 #  include "stk600/rcuc3l4/stk600_rcuc3l4.h"
 #elif BOARD == XPLAIN
 #  include "xplain/xplain.h"
 #elif BOARD == STK600_MEGA
   /*No header-file to include*/
 #elif BOARD == STK600_RC044X
 #  include "stk600/rc044x/stk600_rc044x.h"
 #elif BOARD == STK600_RC064X
 #  include "stk600/rc064x/stk600_rc064x.h"
 #elif BOARD == STK600_RC100X
 #  include "stk600/rc100x/stk600_rc100x.h"
 #elif BOARD == UC3_A3_XPLAINED
 #  include "uc3_a3_xplained/uc3_a3_xplained.h"
 #elif BOARD == UC3_L0_XPLAINED
 #  include "uc3_l0_xplained/uc3_l0_xplained.h"
 #elif BOARD == STK600_RCUC3B0
 #  include "stk600/rcuc3b0/stk600_rcuc3b0.h"
 #elif BOARD == STK600_RCUC3D
 #  include "stk600/rcuc3d/stk600_rcuc3d.h"
 #elif BOARD == STK600_RCUC3C0
 #  include "stk600/rcuc3c0/stk600_rcuc3c0.h"
 #elif BOARD == XMEGA_B1_XPLAINED
 #  include "xmega_b1_xplained/xmega_b1_xplained.h"
 #elif BOARD == STK600_RC064X_LCDX
 #  include "stk600/rc064x_lcdx/stk600_rc064x_lcdx.h"
 #elif BOARD == STK600_RC100X_LCDX
 #  include "stk600/rc100x_lcdx/stk600_rc100x_lcdx.h"
 #elif BOARD == XMEGA_A1_XPLAINED
 #  include "xmega_a1_xplained/xmega_a1_xplained.h"
 #elif BOARD == UC3_L0_XPLAINED_BC
 #  include "uc3_l0_xplained_bc/uc3_l0_xplained_bc.h"
 #elif BOARD == SAM3S_EK
 #  include "sam3s_ek/sam3s_ek.h"
 #  include "system_sam3s.h"
 #elif BOARD == SAM3S_EK2
 #  include "sam3s_ek2/sam3s_ek2.h"
 #  include "system_sam3sd8.h"
 #elif BOARD == SAM3U_EK
 #  include "sam3u_ek/sam3u_ek.h"
 #  include "system_sam3u.h"
 #elif BOARD == SAM3X_EK
 #  include "sam3x_ek/sam3x_ek.h"
 #  include "system_sam3x.h"
 #elif BOARD == SAM3N_EK
 #  include "sam3n_ek/sam3n_ek.h"
 #  include "system_sam3n.h"
 #elif BOARD == SAM4S_EK
 #  include "sam4s_ek/sam4s_ek.h"
 #  include "system_sam4s.h"
 #elif BOARD == SAM4S_XPLAINED
 #  include "sam4s_xplained/sam4s_xplained.h"
 #  include "system_sam4s.h"
 #elif BOARD == MEGA_1284P_XPLAINED
   /*No header-file to include*/
 #elif BOARD == ARDUINO_DUE_X
 #  include "arduino_due_x/arduino_due_x.h"
 #  include "system_sam3x.h"
 #elif BOARD == MEGA1284P_XPLAINED_BC
 #  include "mega1284p_xplained_bc/mega1284p_xplained_bc.h"
 #elif BOARD == UC3_L0_QT600
 #  include "uc3_l0_qt600/uc3_l0_qt600.h"
 #elif BOARD == XMEGA_A3BU_XPLAINED
 #  include "xmega_a3bu_xplained/xmega_a3bu_xplained.h"
 #elif BOARD == UC3B_BOARD_CONTROLLER
 #  include "uc3b_board_controller/uc3b_board_controller.h"
 #elif BOARD == RZ600
 #  include "rz600/rz600.h"
 #elif BOARD == STK600_RCUC3A0
 #  include "stk600/rcuc3a0/stk600_rcuc3a0.h"
 #elif BOARD == ATXMEGA128A1_QT600
 #  include "atxmega128a1_qt600/atxmega128a1_qt600.h"
 #elif BOARD == STK600_RCUC3L3
   #include "stk600/rcuc3l3/stk600_rcuc3l3.h"
 #elif BOARD == SIMULATOR_XMEGA_A1
 #  include "simulator/xmega_a1/simulator_xmega_a1.h"
 #elif BOARD == AVR_SIMULATOR_UC3
 #  include "avr_simulator_uc3/avr_simulator_uc3.h"
 #elif BOARD == USER_BOARD
   // User-reserved area: #include the header file of your board here (if any).
 #  include "user_board.h"
 #elif BOARD == DUMMY_BOARD
 #  include "dummy/dummy_board.h"
 #else
 #  error No known AVR board defined
 #endif

 #if (defined EXT_BOARD)
 #  if EXT_BOARD == MC300
 #    include "mc300/mc300.h"
 #  elif (EXT_BOARD == SENSORS_XPLAINED_INERTIAL_1)  || \
         (EXT_BOARD == SENSORS_XPLAINED_INERTIAL_2)  || \
         (EXT_BOARD == SENSORS_XPLAINED_INERTIAL_A1) || \
         (EXT_BOARD == SENSORS_XPLAINED_PRESSURE_1)  || \
         (EXT_BOARD == SENSORS_XPLAINED_LIGHTPROX_1) || \
         (EXT_BOARD == SENSORS_XPLAINED_BREADBOARD)
 #    include "sensors_xplained/sensors_xplained.h"
 #  elif EXT_BOARD == RZ600_AT86RF231
 #     include "at86rf231/at86rf231.h"
 #  elif EXT_BOARD == RZ600_AT86RF230B
 #    include "at86rf230b/at86rf230b.h"
 #  elif EXT_BOARD == RZ600_AT86RF212
 #    include "at86rf212/at86rf212.h"
 #  elif EXT_BOARD == SECURITY_XPLAINED
 #    include "security_xplained.h"
 #  elif EXT_BOARD == USER_EXT_BOARD
     // User-reserved area: #include the header file of your extension board here
     // (if any).
 #  endif
 #endif


 #if (defined(__GNUC__) && defined(__AVR32__)) || (defined(__ICCAVR32__) || defined(__AAVR32__))
 #ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling.

 /*! \brief This function initializes the board target resources
  *
  * This function should be called to ensure proper initialization of the target
  * board hardware connected to the part.
  */
 extern void board_init(void);

 #endif  // #ifdef __AVR32_ABI_COMPILER__
 #else
 /*! \brief This function initializes the board target resources
  *
  * This function should be called to ensure proper initialization of the target
  * board hardware connected to the part.
  */
 extern void board_init(void);
 #endif


 #ifdef __cplusplus
 }
 #endif

 /**
  * \}
  */

 #endif  // _BOARD_H_
	/**
	* \file
	*
	* \brief Standard board header file.
	*
	* This file includes the appropriate board header file according to the
	* defined board (parameter BOARD).
	*
	* Copyright (c) 2009-2012 Atmel Corporation. All rights reserved.
	*
	* \asf_license_start
	*
	* \page License
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* 1. Redistributions of source code must retain the above copyright notice,
	* this list of conditions and the following disclaimer.
	*
	* 2. Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* 3. The name of Atmel may not be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* 4. This software may only be redistributed and used in connection with an
	* Atmel microcontroller product.
	*
	* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
	* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
	* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
	* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
	* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*
	* \asf_license_stop
	*
	*/

	#ifndef _BOARD_H_
	#define _BOARD_H_

	/**
	* \defgroup group_common_boards Generic board support
	*
	* The generic board support module includes board-specific definitions
	* and function prototypes, such as the board initialization function.
	*
	* \{
	*/

	#include "compiler.h"

	#ifdef __cplusplus
	extern "C" {
	#endif


	/*! \name Base Boards
	*/
	//! @{
	#define EVK1100 1 //!< AT32UC3A EVK1100 board.
	#define EVK1101 2 //!< AT32UC3B EVK1101 board.
	#define UC3C_EK 3 //!< AT32UC3C UC3C_EK board.
	#define EVK1104 4 //!< AT32UC3A3 EVK1104 board.
	#define EVK1105 5 //!< AT32UC3A EVK1105 board.
	#define STK600_RCUC3L0 6 //!< STK600 RCUC3L0 board.
	#define UC3L_EK 7 //!< AT32UC3L-EK board.
	#define XPLAIN 8 //!< ATxmega128A1 Xplain board.
	#define STK600_RC064X 10 //!< ATxmega256A3 STK600 board.
	#define STK600_RC100X 11 //!< ATxmega128A1 STK600 board.
	#define UC3_A3_XPLAINED 13 //!< ATUC3A3 UC3-A3 Xplained board.
	#define UC3_L0_XPLAINED 15 //!< ATUC3L0 UC3-L0 Xplained board.
	#define STK600_RCUC3D 16 //!< STK600 RCUC3D board.
	#define STK600_RCUC3C0 17 //!< STK600 RCUC3C board.
	#define XMEGA_B1_XPLAINED 18 //!< ATxmega128B1 Xplained board.
	#define XMEGA_A1_XPLAINED 19 //!< ATxmega128A1 Xplain-A1 board.
	#define STK600_RCUC3L4 21 //!< ATUCL4 STK600 board
	#define UC3_L0_XPLAINED_BC 22 //!< ATUC3L0 UC3-L0 Xplained board controller board
	#define MEGA1284P_XPLAINED_BC 23 //!< ATmega1284P-Xplained board controller board
	#define STK600_RC044X 24 //!< STK600 with RC044X routing card board.
	#define STK600_RCUC3B0 25 //!< STK600 RCUC3B0 board.
	#define UC3_L0_QT600 26 //!< QT600 UC3L0 MCU board.
	#define XMEGA_A3BU_XPLAINED 27 //!< ATxmega256A3BU Xplained board.
	#define STK600_RC064X_LCDX 28 //!< XMEGAB3 STK600 RC064X LCDX board.
	#define STK600_RC100X_LCDX 29 //!< XMEGAB1 STK600 RC100X LCDX board.
	#define UC3B_BOARD_CONTROLLER 30 //!< AT32UC3B1 board controller for Atmel boards
	#define RZ600 31 //!< AT32UC3A RZ600 MCU board
	#define SAM3S_EK 32 //!< SAM3S-EK board.
	#define SAM3U_EK 33 //!< SAM3U-EK board.
	#define SAM3X_EK 34 //!< SAM3X-EK board.
	#define SAM3N_EK 35 //!< SAM3N-EK board.
	#define SAM3S_EK2 36 //!< SAM3S-EK2 board.
	#define SAM4S_EK 37 //!< SAM4S-EK board.
	#define STK600_RCUC3A0 38 //!< STK600 RCUC3A0 board.
	#define STK600_MEGA 39 //!< STK600 MEGA board.
	#define MEGA_1284P_XPLAINED 40 //!< ATmega1284P Xplained board.
	#define SAM4S_XPLAINED 41 //!< SAM4S Xplained board.
	#define ATXMEGA128A1_QT600 42 //!< QT600 ATXMEGA128A1 MCU board.
	#define ARDUINO_DUE_X 43 //!< Arduino Due/X board.
	#define STK600_RCUC3L3 44 //!< ATUCL3 STK600 board
	#define SIMULATOR_XMEGA_A1 97 //!< Simulator for XMEGA A1 devices
	#define AVR_SIMULATOR_UC3 98 //!< AVR SIMULATOR for AVR UC3 device family.
	#define USER_BOARD 99 //!< User-reserved board (if any).
	#define DUMMY_BOARD 100 //!< Dummy board to support board-independent applications (e.g. bootloader)
	//! @}

	/*! \name Extension Boards
	*/
	//! @{
	#define EXT1102 1 //!< AT32UC3B EXT1102 board
	#define MC300 2 //!< AT32UC3 MC300 board
	#define SENSORS_XPLAINED_INERTIAL_1 3 //!< Xplained inertial sensor board 1
	#define SENSORS_XPLAINED_INERTIAL_2 4 //!< Xplained inertial sensor board 2
	#define SENSORS_XPLAINED_PRESSURE_1 5 //!< Xplained pressure sensor board
	#define SENSORS_XPLAINED_LIGHTPROX_1 6 //!< Xplained light & proximity sensor board
	#define SENSORS_XPLAINED_INERTIAL_A1 7 //!< Xplained inertial sensor board "A"
	#define RZ600_AT86RF231 8 //!< AT86RF231 RF board in RZ600
	#define RZ600_AT86RF230B 9 //!< AT86RF231 RF board in RZ600
	#define RZ600_AT86RF212 10 //!< AT86RF231 RF board in RZ600
	#define SENSORS_XPLAINED_BREADBOARD 11 //!< Xplained sensor development breadboard
	#define SECURITY_XPLAINED 12 //!< Xplained ATSHA204 board
	#define USER_EXT_BOARD 99 //!< User-reserved extension board (if any).
	//! @}

	#if BOARD == EVK1100
	# include "evk1100/evk1100.h"
	#elif BOARD == EVK1101
	# include "evk1101/evk1101.h"
	#elif BOARD == UC3C_EK
	# include "uc3c_ek/uc3c_ek.h"
	#elif BOARD == EVK1104
	# include "evk1104/evk1104.h"
	#elif BOARD == EVK1105
	# include "evk1105/evk1105.h"
	#elif BOARD == STK600_RCUC3L0
	# include "stk600/rcuc3l0/stk600_rcuc3l0.h"
	#elif BOARD == UC3L_EK
	# include "uc3l_ek/uc3l_ek.h"
	#elif BOARD == STK600_RCUC3L4
	# include "stk600/rcuc3l4/stk600_rcuc3l4.h"
	#elif BOARD == XPLAIN
	# include "xplain/xplain.h"
	#elif BOARD == STK600_MEGA
	/No header-file to include/
	#elif BOARD == STK600_RC044X
	# include "stk600/rc044x/stk600_rc044x.h"
	#elif BOARD == STK600_RC064X
	# include "stk600/rc064x/stk600_rc064x.h"
	#elif BOARD == STK600_RC100X
	# include "stk600/rc100x/stk600_rc100x.h"
	#elif BOARD == UC3_A3_XPLAINED
	# include "uc3_a3_xplained/uc3_a3_xplained.h"
	#elif BOARD == UC3_L0_XPLAINED
	# include "uc3_l0_xplained/uc3_l0_xplained.h"
	#elif BOARD == STK600_RCUC3B0
	# include "stk600/rcuc3b0/stk600_rcuc3b0.h"
	#elif BOARD == STK600_RCUC3D
	# include "stk600/rcuc3d/stk600_rcuc3d.h"
	#elif BOARD == STK600_RCUC3C0
	# include "stk600/rcuc3c0/stk600_rcuc3c0.h"
	#elif BOARD == XMEGA_B1_XPLAINED
	# include "xmega_b1_xplained/xmega_b1_xplained.h"
	#elif BOARD == STK600_RC064X_LCDX
	# include "stk600/rc064x_lcdx/stk600_rc064x_lcdx.h"
	#elif BOARD == STK600_RC100X_LCDX
	# include "stk600/rc100x_lcdx/stk600_rc100x_lcdx.h"
	#elif BOARD == XMEGA_A1_XPLAINED
	# include "xmega_a1_xplained/xmega_a1_xplained.h"
	#elif BOARD == UC3_L0_XPLAINED_BC
	# include "uc3_l0_xplained_bc/uc3_l0_xplained_bc.h"
	#elif BOARD == SAM3S_EK
	# include "sam3s_ek/sam3s_ek.h"
	# include "system_sam3s.h"
	#elif BOARD == SAM3S_EK2
	# include "sam3s_ek2/sam3s_ek2.h"
	# include "system_sam3sd8.h"
	#elif BOARD == SAM3U_EK
	# include "sam3u_ek/sam3u_ek.h"
	# include "system_sam3u.h"
	#elif BOARD == SAM3X_EK
	# include "sam3x_ek/sam3x_ek.h"
	# include "system_sam3x.h"
	#elif BOARD == SAM3N_EK
	# include "sam3n_ek/sam3n_ek.h"
	# include "system_sam3n.h"
	#elif BOARD == SAM4S_EK
	# include "sam4s_ek/sam4s_ek.h"
	# include "system_sam4s.h"
	#elif BOARD == SAM4S_XPLAINED
	# include "sam4s_xplained/sam4s_xplained.h"
	# include "system_sam4s.h"
	#elif BOARD == MEGA_1284P_XPLAINED
	/No header-file to include/
	#elif BOARD == ARDUINO_DUE_X
	# include "arduino_due_x/arduino_due_x.h"
	# include "system_sam3x.h"
	#elif BOARD == MEGA1284P_XPLAINED_BC
	# include "mega1284p_xplained_bc/mega1284p_xplained_bc.h"
	#elif BOARD == UC3_L0_QT600
	# include "uc3_l0_qt600/uc3_l0_qt600.h"
	#elif BOARD == XMEGA_A3BU_XPLAINED
	# include "xmega_a3bu_xplained/xmega_a3bu_xplained.h"
	#elif BOARD == UC3B_BOARD_CONTROLLER
	# include "uc3b_board_controller/uc3b_board_controller.h"
	#elif BOARD == RZ600
	# include "rz600/rz600.h"
	#elif BOARD == STK600_RCUC3A0
	# include "stk600/rcuc3a0/stk600_rcuc3a0.h"
	#elif BOARD == ATXMEGA128A1_QT600
	# include "atxmega128a1_qt600/atxmega128a1_qt600.h"
	#elif BOARD == STK600_RCUC3L3
	#include "stk600/rcuc3l3/stk600_rcuc3l3.h"
	#elif BOARD == SIMULATOR_XMEGA_A1
	# include "simulator/xmega_a1/simulator_xmega_a1.h"
	#elif BOARD == AVR_SIMULATOR_UC3
	# include "avr_simulator_uc3/avr_simulator_uc3.h"
	#elif BOARD == USER_BOARD
	// User-reserved area: #include the header file of your board here (if any).
	# include "user_board.h"
	#elif BOARD == DUMMY_BOARD
	# include "dummy/dummy_board.h"
	#else
	# error No known AVR board defined
	#endif

	#if (defined EXT_BOARD)
	# if EXT_BOARD == MC300
	# include "mc300/mc300.h"
	# elif (EXT_BOARD == SENSORS_XPLAINED_INERTIAL_1) \|\| \
	(EXT_BOARD == SENSORS_XPLAINED_INERTIAL_2) \|\| \
	(EXT_BOARD == SENSORS_XPLAINED_INERTIAL_A1) \|\| \
	(EXT_BOARD == SENSORS_XPLAINED_PRESSURE_1) \|\| \
	(EXT_BOARD == SENSORS_XPLAINED_LIGHTPROX_1) \|\| \
	(EXT_BOARD == SENSORS_XPLAINED_BREADBOARD)
	# include "sensors_xplained/sensors_xplained.h"
	# elif EXT_BOARD == RZ600_AT86RF231
	# include "at86rf231/at86rf231.h"
	# elif EXT_BOARD == RZ600_AT86RF230B
	# include "at86rf230b/at86rf230b.h"
	# elif EXT_BOARD == RZ600_AT86RF212
	# include "at86rf212/at86rf212.h"
	# elif EXT_BOARD == SECURITY_XPLAINED
	# include "security_xplained.h"
	# elif EXT_BOARD == USER_EXT_BOARD
	// User-reserved area: #include the header file of your extension board here
	// (if any).
	# endif
	#endif


	#if (defined(__GNUC__) && defined(__AVR32__)) \|\| (defined(__ICCAVR32__) \|\| defined(__AAVR32__))
	#ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling.

	/*! \brief This function initializes the board target resources
	*
	* This function should be called to ensure proper initialization of the target
	* board hardware connected to the part.
	*/
	extern void board_init(void);

	#endif // #ifdef __AVR32_ABI_COMPILER__
	#else
	/*! \brief This function initializes the board target resources
	*
	* This function should be called to ensure proper initialization of the target
	* board hardware connected to the part.
	*/
	extern void board_init(void);
	#endif


	#ifdef __cplusplus
	}
	#endif

	/**
	* \}
	*/

	#endif // _BOARD_H_