/**
 * \file
 *
 * Copyright (c) 2012 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */

#ifndef _SAM3XA_SPI_COMPONENT_
#define _SAM3XA_SPI_COMPONENT_

/* ============================================================================= */
/**  SOFTWARE API DEFINITION FOR Serial Peripheral Interface */
/* ============================================================================= */
/** \addtogroup SAM3XA_SPI Serial Peripheral Interface */
/*@{*/

#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
/** \brief Spi hardware registers */
typedef struct {
  WoReg SPI_CR;        /**< \brief (Spi Offset: 0x00) Control Register */
  RwReg SPI_MR;        /**< \brief (Spi Offset: 0x04) Mode Register */
  RoReg SPI_RDR;       /**< \brief (Spi Offset: 0x08) Receive Data Register */
  WoReg SPI_TDR;       /**< \brief (Spi Offset: 0x0C) Transmit Data Register */
  RoReg SPI_SR;        /**< \brief (Spi Offset: 0x10) Status Register */
  WoReg SPI_IER;       /**< \brief (Spi Offset: 0x14) Interrupt Enable Register */
  WoReg SPI_IDR;       /**< \brief (Spi Offset: 0x18) Interrupt Disable Register */
  RoReg SPI_IMR;       /**< \brief (Spi Offset: 0x1C) Interrupt Mask Register */
  RoReg Reserved1[4];
  RwReg SPI_CSR[4];    /**< \brief (Spi Offset: 0x30) Chip Select Register */
  RoReg Reserved2[41];
  RwReg SPI_WPMR;      /**< \brief (Spi Offset: 0xE4) Write Protection Control Register */
  RoReg SPI_WPSR;      /**< \brief (Spi Offset: 0xE8) Write Protection Status Register */
} Spi;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- SPI_CR : (SPI Offset: 0x00) Control Register -------- */
#define SPI_CR_SPIEN (0x1u << 0) /**< \brief (SPI_CR) SPI Enable */
#define SPI_CR_SPIDIS (0x1u << 1) /**< \brief (SPI_CR) SPI Disable */
#define SPI_CR_SWRST (0x1u << 7) /**< \brief (SPI_CR) SPI Software Reset */
#define SPI_CR_LASTXFER (0x1u << 24) /**< \brief (SPI_CR) Last Transfer */
/* -------- SPI_MR : (SPI Offset: 0x04) Mode Register -------- */
#define SPI_MR_MSTR (0x1u << 0) /**< \brief (SPI_MR) Master/Slave Mode */
#define SPI_MR_PS (0x1u << 1) /**< \brief (SPI_MR) Peripheral Select */
#define SPI_MR_PCSDEC (0x1u << 2) /**< \brief (SPI_MR) Chip Select Decode */
#define SPI_MR_MODFDIS (0x1u << 4) /**< \brief (SPI_MR) Mode Fault Detection */
#define SPI_MR_WDRBT (0x1u << 5) /**< \brief (SPI_MR) Wait Data Read Before Transfer */
#define SPI_MR_LLB (0x1u << 7) /**< \brief (SPI_MR) Local Loopback Enable */
#define SPI_MR_PCS_Pos 16
#define SPI_MR_PCS_Msk (0xfu << SPI_MR_PCS_Pos) /**< \brief (SPI_MR) Peripheral Chip Select */
#define SPI_MR_PCS(value) ((SPI_MR_PCS_Msk & ((value) << SPI_MR_PCS_Pos)))
#define SPI_MR_DLYBCS_Pos 24
#define SPI_MR_DLYBCS_Msk (0xffu << SPI_MR_DLYBCS_Pos) /**< \brief (SPI_MR) Delay Between Chip Selects */
#define SPI_MR_DLYBCS(value) ((SPI_MR_DLYBCS_Msk & ((value) << SPI_MR_DLYBCS_Pos)))
/* -------- SPI_RDR : (SPI Offset: 0x08) Receive Data Register -------- */
#define SPI_RDR_RD_Pos 0
#define SPI_RDR_RD_Msk (0xffffu << SPI_RDR_RD_Pos) /**< \brief (SPI_RDR) Receive Data */
#define SPI_RDR_PCS_Pos 16
#define SPI_RDR_PCS_Msk (0xfu << SPI_RDR_PCS_Pos) /**< \brief (SPI_RDR) Peripheral Chip Select */
/* -------- SPI_TDR : (SPI Offset: 0x0C) Transmit Data Register -------- */
#define SPI_TDR_TD_Pos 0
#define SPI_TDR_TD_Msk (0xffffu << SPI_TDR_TD_Pos) /**< \brief (SPI_TDR) Transmit Data */
#define SPI_TDR_TD(value) ((SPI_TDR_TD_Msk & ((value) << SPI_TDR_TD_Pos)))
#define SPI_TDR_PCS_Pos 16
#define SPI_TDR_PCS_Msk (0xfu << SPI_TDR_PCS_Pos) /**< \brief (SPI_TDR) Peripheral Chip Select */
#define SPI_TDR_PCS(value) ((SPI_TDR_PCS_Msk & ((value) << SPI_TDR_PCS_Pos)))
#define SPI_TDR_LASTXFER (0x1u << 24) /**< \brief (SPI_TDR) Last Transfer */
/* -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- */
#define SPI_SR_RDRF (0x1u << 0) /**< \brief (SPI_SR) Receive Data Register Full */
#define SPI_SR_TDRE (0x1u << 1) /**< \brief (SPI_SR) Transmit Data Register Empty */
#define SPI_SR_MODF (0x1u << 2) /**< \brief (SPI_SR) Mode Fault Error */
#define SPI_SR_OVRES (0x1u << 3) /**< \brief (SPI_SR) Overrun Error Status */
#define SPI_SR_NSSR (0x1u << 8) /**< \brief (SPI_SR) NSS Rising */
#define SPI_SR_TXEMPTY (0x1u << 9) /**< \brief (SPI_SR) Transmission Registers Empty */
#define SPI_SR_UNDES (0x1u << 10) /**< \brief (SPI_SR) Underrun Error Status (Slave Mode Only) */
#define SPI_SR_SPIENS (0x1u << 16) /**< \brief (SPI_SR) SPI Enable Status */
/* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */
#define SPI_IER_RDRF (0x1u << 0) /**< \brief (SPI_IER) Receive Data Register Full Interrupt Enable */
#define SPI_IER_TDRE (0x1u << 1) /**< \brief (SPI_IER) SPI Transmit Data Register Empty Interrupt Enable */
#define SPI_IER_MODF (0x1u << 2) /**< \brief (SPI_IER) Mode Fault Error Interrupt Enable */
#define SPI_IER_OVRES (0x1u << 3) /**< \brief (SPI_IER) Overrun Error Interrupt Enable */
#define SPI_IER_NSSR (0x1u << 8) /**< \brief (SPI_IER) NSS Rising Interrupt Enable */
#define SPI_IER_TXEMPTY (0x1u << 9) /**< \brief (SPI_IER) Transmission Registers Empty Enable */
#define SPI_IER_UNDES (0x1u << 10) /**< \brief (SPI_IER) Underrun Error Interrupt Enable */
/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- */
#define SPI_IDR_RDRF (0x1u << 0) /**< \brief (SPI_IDR) Receive Data Register Full Interrupt Disable */
#define SPI_IDR_TDRE (0x1u << 1) /**< \brief (SPI_IDR) SPI Transmit Data Register Empty Interrupt Disable */
#define SPI_IDR_MODF (0x1u << 2) /**< \brief (SPI_IDR) Mode Fault Error Interrupt Disable */
#define SPI_IDR_OVRES (0x1u << 3) /**< \brief (SPI_IDR) Overrun Error Interrupt Disable */
#define SPI_IDR_NSSR (0x1u << 8) /**< \brief (SPI_IDR) NSS Rising Interrupt Disable */
#define SPI_IDR_TXEMPTY (0x1u << 9) /**< \brief (SPI_IDR) Transmission Registers Empty Disable */
#define SPI_IDR_UNDES (0x1u << 10) /**< \brief (SPI_IDR) Underrun Error Interrupt Disable */
/* -------- SPI_IMR : (SPI Offset: 0x1C) Interrupt Mask Register -------- */
#define SPI_IMR_RDRF (0x1u << 0) /**< \brief (SPI_IMR) Receive Data Register Full Interrupt Mask */
#define SPI_IMR_TDRE (0x1u << 1) /**< \brief (SPI_IMR) SPI Transmit Data Register Empty Interrupt Mask */
#define SPI_IMR_MODF (0x1u << 2) /**< \brief (SPI_IMR) Mode Fault Error Interrupt Mask */
#define SPI_IMR_OVRES (0x1u << 3) /**< \brief (SPI_IMR) Overrun Error Interrupt Mask */
#define SPI_IMR_NSSR (0x1u << 8) /**< \brief (SPI_IMR) NSS Rising Interrupt Mask */
#define SPI_IMR_TXEMPTY (0x1u << 9) /**< \brief (SPI_IMR) Transmission Registers Empty Mask */
#define SPI_IMR_UNDES (0x1u << 10) /**< \brief (SPI_IMR) Underrun Error Interrupt Mask */
/* -------- SPI_CSR[4] : (SPI Offset: 0x30) Chip Select Register -------- */
#define SPI_CSR_CPOL (0x1u << 0) /**< \brief (SPI_CSR[4]) Clock Polarity */
#define SPI_CSR_NCPHA (0x1u << 1) /**< \brief (SPI_CSR[4]) Clock Phase */
#define SPI_CSR_CSNAAT (0x1u << 2) /**< \brief (SPI_CSR[4]) Chip Select Not Active After Transfer (Ignored if CSAAT = 1) */
#define SPI_CSR_CSAAT (0x1u << 3) /**< \brief (SPI_CSR[4]) Chip Select Not Active After Transfer (Ignored if CSAAT = 1) */
#define SPI_CSR_BITS_Pos 4
#define SPI_CSR_BITS_Msk (0xfu << SPI_CSR_BITS_Pos) /**< \brief (SPI_CSR[4]) Bits Per Transfer */
#define   SPI_CSR_BITS_8_BIT (0x0u << 4) /**< \brief (SPI_CSR[4]) 8 bits for transfer */
#define   SPI_CSR_BITS_9_BIT (0x1u << 4) /**< \brief (SPI_CSR[4]) 9 bits for transfer */
#define   SPI_CSR_BITS_10_BIT (0x2u << 4) /**< \brief (SPI_CSR[4]) 10 bits for transfer */
#define   SPI_CSR_BITS_11_BIT (0x3u << 4) /**< \brief (SPI_CSR[4]) 11 bits for transfer */
#define   SPI_CSR_BITS_12_BIT (0x4u << 4) /**< \brief (SPI_CSR[4]) 12 bits for transfer */
#define   SPI_CSR_BITS_13_BIT (0x5u << 4) /**< \brief (SPI_CSR[4]) 13 bits for transfer */
#define   SPI_CSR_BITS_14_BIT (0x6u << 4) /**< \brief (SPI_CSR[4]) 14 bits for transfer */
#define   SPI_CSR_BITS_15_BIT (0x7u << 4) /**< \brief (SPI_CSR[4]) 15 bits for transfer */
#define   SPI_CSR_BITS_16_BIT (0x8u << 4) /**< \brief (SPI_CSR[4]) 16 bits for transfer */
#define SPI_CSR_SCBR_Pos 8
#define SPI_CSR_SCBR_Msk (0xffu << SPI_CSR_SCBR_Pos) /**< \brief (SPI_CSR[4]) Serial Clock Baud Rate */
#define SPI_CSR_SCBR(value) ((SPI_CSR_SCBR_Msk & ((value) << SPI_CSR_SCBR_Pos)))
#define SPI_CSR_DLYBS_Pos 16
#define SPI_CSR_DLYBS_Msk (0xffu << SPI_CSR_DLYBS_Pos) /**< \brief (SPI_CSR[4]) Delay Before SPCK */
#define SPI_CSR_DLYBS(value) ((SPI_CSR_DLYBS_Msk & ((value) << SPI_CSR_DLYBS_Pos)))
#define SPI_CSR_DLYBCT_Pos 24
#define SPI_CSR_DLYBCT_Msk (0xffu << SPI_CSR_DLYBCT_Pos) /**< \brief (SPI_CSR[4]) Delay Between Consecutive Transfers */
#define SPI_CSR_DLYBCT(value) ((SPI_CSR_DLYBCT_Msk & ((value) << SPI_CSR_DLYBCT_Pos)))
/* -------- SPI_WPMR : (SPI Offset: 0xE4) Write Protection Control Register -------- */
#define SPI_WPMR_WPEN (0x1u << 0) /**< \brief (SPI_WPMR) Write Protection Enable */
#define SPI_WPMR_WPKEY_Pos 8
#define SPI_WPMR_WPKEY_Msk (0xffffffu << SPI_WPMR_WPKEY_Pos) /**< \brief (SPI_WPMR) Write Protection Key Password */
#define SPI_WPMR_WPKEY(value) ((SPI_WPMR_WPKEY_Msk & ((value) << SPI_WPMR_WPKEY_Pos)))
/* -------- SPI_WPSR : (SPI Offset: 0xE8) Write Protection Status Register -------- */
#define SPI_WPSR_WPVS (0x7u << 0) /**< \brief (SPI_WPSR) Write Protection Violation Status */
#define SPI_WPSR_WPVS_Pos 0
#define SPI_WPSR_WPVS_Msk (0x1u << SPI_WPSR_WPVS_Pos) /**< \brief (SPI_WPSR) Write Protection Violation Status */
#define SPI_WPSR_WPVSRC_Pos 8
#define SPI_WPSR_WPVSRC_Msk (0xffu << SPI_WPSR_WPVSRC_Pos) /**< \brief (SPI_WPSR) Write Protection Violation Source */

/*@}*/


#endif /* _SAM3XA_SPI_COMPONENT_ */