| //***************************************************************************** | |
| // | |
| // hw_watchdog.h - Macros used when accessing the Watchdog Timer hardware. | |
| // | |
| // Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved. | |
| // | |
| // Software License Agreement | |
| // | |
| // Luminary Micro, Inc. (LMI) is supplying this software for use solely and | |
| // exclusively on LMI's Stellaris Family of microcontroller products. | |
| // | |
| // The software is owned by LMI and/or its suppliers, and is protected under | |
| // applicable copyright laws. All rights are reserved. Any use in violation | |
| // of the foregoing restrictions may subject the user to criminal sanctions | |
| // under applicable laws, as well as to civil liability for the breach of the | |
| // terms and conditions of this license. | |
| // | |
| // THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED | |
| // OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF | |
| // MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. | |
| // LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR | |
| // CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. | |
| // | |
| // This is part of revision 816 of the Stellaris Driver Library. | |
| // | |
| //***************************************************************************** | |
| #ifndef __HW_WATCHDOG_H__ | |
| #define __HW_WATCHDOG_H__ | |
| //***************************************************************************** | |
| // | |
| // The following define the offsets of the Watchdog Timer registers. | |
| // | |
| //***************************************************************************** | |
| #define WDT_O_LOAD 0x00000000 // Load register | |
| #define WDT_O_VALUE 0x00000004 // Current value register | |
| #define WDT_O_CTL 0x00000008 // Control register | |
| #define WDT_O_ICR 0x0000000C // Interrupt clear register | |
| #define WDT_O_RIS 0x00000010 // Raw interrupt status register | |
| #define WDT_O_MIS 0x00000014 // Masked interrupt status register | |
| #define WDT_O_TEST 0x00000418 // Test register | |
| #define WDT_O_LOCK 0x00000C00 // Lock register | |
| #define WDT_O_PeriphID4 0x00000FD0 // | |
| #define WDT_O_PeriphID5 0x00000FD4 // | |
| #define WDT_O_PeriphID6 0x00000FD8 // | |
| #define WDT_O_PeriphID7 0x00000FDC // | |
| #define WDT_O_PeriphID0 0x00000FE0 // | |
| #define WDT_O_PeriphID1 0x00000FE4 // | |
| #define WDT_O_PeriphID2 0x00000FE8 // | |
| #define WDT_O_PeriphID3 0x00000FEC // | |
| #define WDT_O_PCellID0 0x00000FF0 // | |
| #define WDT_O_PCellID1 0x00000FF4 // | |
| #define WDT_O_PCellID2 0x00000FF8 // | |
| #define WDT_O_PCellID3 0x00000FFC // | |
| //***************************************************************************** | |
| // | |
| // The following define the bit fields in the WDT_CTL register. | |
| // | |
| //***************************************************************************** | |
| #define WDT_CTL_RESEN 0x00000002 // Enable reset output | |
| #define WDT_CTL_INTEN 0x00000001 // Enable the WDT counter and int | |
| //***************************************************************************** | |
| // | |
| // The following define the bit fields in the WDT_ISR, WDT_RIS, and WDT_MIS | |
| // registers. | |
| // | |
| //***************************************************************************** | |
| #define WDT_INT_TIMEOUT 0x00000001 // Watchdog timer expired | |
| //***************************************************************************** | |
| // | |
| // The following define the bit fields in the WDT_TEST register. | |
| // | |
| //***************************************************************************** | |
| #define WDT_TEST_STALL 0x00000100 // Watchdog stall enable | |
| #ifndef DEPRECATED | |
| #define WDT_TEST_STALL_EN 0x00000100 // Watchdog stall enable | |
| #endif | |
| //***************************************************************************** | |
| // | |
| // The following define the bit fields in the WDT_LOCK register. | |
| // | |
| //***************************************************************************** | |
| #define WDT_LOCK_LOCKED 0x00000001 // Watchdog timer is locked | |
| #define WDT_LOCK_UNLOCKED 0x00000000 // Watchdog timer is unlocked | |
| #define WDT_LOCK_UNLOCK 0x1ACCE551 // Unlocks the watchdog timer | |
| //***************************************************************************** | |
| // | |
| // The following define the reset values for the WDT registers. | |
| // | |
| //***************************************************************************** | |
| #define WDT_RV_LOAD 0xFFFFFFFF // Load register | |
| #define WDT_RV_VALUE 0xFFFFFFFF // Current value register | |
| #define WDT_RV_CTL 0x00000000 // Control register | |
| #define WDT_RV_RIS 0x00000000 // Raw interrupt status register | |
| #define WDT_RV_MIS 0x00000000 // Masked interrupt status register | |
| #define WDT_RV_LOCK 0x00000000 // Lock register | |
| #define WDT_RV_PeriphID4 0x00000000 // | |
| #define WDT_RV_PeriphID5 0x00000000 // | |
| #define WDT_RV_PeriphID6 0x00000000 // | |
| #define WDT_RV_PeriphID7 0x00000000 // | |
| #define WDT_RV_PeriphID0 0x00000005 // | |
| #define WDT_RV_PeriphID1 0x00000018 // | |
| #define WDT_RV_PeriphID2 0x00000018 // | |
| #define WDT_RV_PeriphID3 0x00000001 // | |
| #define WDT_RV_PCellID0 0x0000000D // | |
| #define WDT_RV_PCellID1 0x000000F0 // | |
| #define WDT_RV_PCellID2 0x00000005 // | |
| #define WDT_RV_PCellID3 0x000000B1 // | |
| #endif // __HW_WATCHDOG_H__ |