FreeRTOS/Demo/CORTEX_M0+_Atmel_SAMD20_XPlained/RTOSDemo/src/ASF/sam0/utils/cmsis/samd20/include/instance/instance_sercom4.h - nest-detect/1.0.2/freertos - Git at Google

 /**
  * \file
  *
  * \brief Instance description for SERCOM4
  *
  * Copyright (c) 2013 Atmel Corporation. All rights reserved.
  *
  * \asf_license_start
  *
  * \page License
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * 1. Redistributions of source code must retain the above copyright notice,
  *    this list of conditions and the following disclaimer.
  *
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  *    this list of conditions and the following disclaimer in the documentation
  *    and/or other materials provided with the distribution.
  *
  * 3. The name of Atmel may not be used to endorse or promote products derived
  *    from this software without specific prior written permission.
  *
  * 4. This software may only be redistributed and used in connection with an
  *    Atmel microcontroller product.
  *
  * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
  * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  *
  * \asf_license_stop
  *
  */

 #ifndef _SAMD20_SERCOM4_INSTANCE_
 #define _SAMD20_SERCOM4_INSTANCE_

 /* ========== Register definition for SERCOM4 peripheral ========== */
 #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
 #define REG_SERCOM4_I2CM_CTRLA     (0x42001800U) /**< \brief (SERCOM4) I2CM Control Register A */
 #define REG_SERCOM4_I2CS_CTRLA     (0x42001800U) /**< \brief (SERCOM4) I2CS Control Register A */
 #define REG_SERCOM4_SPI_CTRLA      (0x42001800U) /**< \brief (SERCOM4) SPI Control Register A */
 #define REG_SERCOM4_USART_CTRLA    (0x42001800U) /**< \brief (SERCOM4) USART Control Register A */
 #define REG_SERCOM4_I2CM_CTRLB     (0x42001804U) /**< \brief (SERCOM4) I2CM Control Register B */
 #define REG_SERCOM4_I2CS_CTRLB     (0x42001804U) /**< \brief (SERCOM4) I2CS Control Register B */
 #define REG_SERCOM4_SPI_CTRLB      (0x42001804U) /**< \brief (SERCOM4) SPI Control Register B */
 #define REG_SERCOM4_USART_CTRLB    (0x42001804U) /**< \brief (SERCOM4) USART Control Register B */
 #define REG_SERCOM4_I2CM_DBGCTRL   (0x42001808U) /**< \brief (SERCOM4) I2CM Debug Register */
 #define REG_SERCOM4_SPI_DBGCTRL    (0x42001808U) /**< \brief (SERCOM4) SPI Debug Register */
 #define REG_SERCOM4_USART_DBGCTRL  (0x42001808U) /**< \brief (SERCOM4) USART Debug Register */
 #define REG_SERCOM4_I2CM_BAUD      (0x4200180AU) /**< \brief (SERCOM4) I2CM Baud Rate Register */
 #define REG_SERCOM4_SPI_BAUD       (0x4200180AU) /**< \brief (SERCOM4) SPI Baud Rate Register */
 #define REG_SERCOM4_USART_BAUD     (0x4200180AU) /**< \brief (SERCOM4) USART Baud Rate Register */
 #define REG_SERCOM4_I2CM_INTENCLR  (0x4200180CU) /**< \brief (SERCOM4) I2CM Interrupt Enable Clear Register */
 #define REG_SERCOM4_I2CS_INTENCLR  (0x4200180CU) /**< \brief (SERCOM4) I2CS Interrupt Enable Clear Register */
 #define REG_SERCOM4_SPI_INTENCLR   (0x4200180CU) /**< \brief (SERCOM4) SPI Interrupt Enable Clear Register */
 #define REG_SERCOM4_USART_INTENCLR (0x4200180CU) /**< \brief (SERCOM4) USART Interrupt Enable Clear Register */
 #define REG_SERCOM4_I2CM_INTENSET  (0x4200180DU) /**< \brief (SERCOM4) I2CM Interrupt Enable Set Register */
 #define REG_SERCOM4_I2CS_INTENSET  (0x4200180DU) /**< \brief (SERCOM4) I2CS Interrupt Enable Set Register */
 #define REG_SERCOM4_SPI_INTENSET   (0x4200180DU) /**< \brief (SERCOM4) SPI Interrupt Enable Set Register */
 #define REG_SERCOM4_USART_INTENSET (0x4200180DU) /**< \brief (SERCOM4) USART Interrupt Enable Set Register */
 #define REG_SERCOM4_I2CM_INTFLAG   (0x4200180EU) /**< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear Register */
 #define REG_SERCOM4_I2CS_INTFLAG   (0x4200180EU) /**< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear Register */
 #define REG_SERCOM4_SPI_INTFLAG    (0x4200180EU) /**< \brief (SERCOM4) SPI Interrupt Flag Status and Clear Register */
 #define REG_SERCOM4_USART_INTFLAG  (0x4200180EU) /**< \brief (SERCOM4) USART Interrupt Flag Status and Clear Register */
 #define REG_SERCOM4_I2CM_STATUS    (0x42001810U) /**< \brief (SERCOM4) I2CM Status Register */
 #define REG_SERCOM4_I2CS_STATUS    (0x42001810U) /**< \brief (SERCOM4) I2CS Status Register */
 #define REG_SERCOM4_SPI_STATUS     (0x42001810U) /**< \brief (SERCOM4) SPI Status Register */
 #define REG_SERCOM4_USART_STATUS   (0x42001810U) /**< \brief (SERCOM4) USART Status Register */
 #define REG_SERCOM4_I2CM_ADDR      (0x42001814U) /**< \brief (SERCOM4) I2CM Address Register */
 #define REG_SERCOM4_I2CS_ADDR      (0x42001814U) /**< \brief (SERCOM4) I2CS Address Register */
 #define REG_SERCOM4_SPI_ADDR       (0x42001814U) /**< \brief (SERCOM4) SPI Address Register */
 #define REG_SERCOM4_I2CM_DATA      (0x42001818U) /**< \brief (SERCOM4) I2CM Data Register */
 #define REG_SERCOM4_I2CS_DATA      (0x42001818U) /**< \brief (SERCOM4) I2CS Data Register */
 #define REG_SERCOM4_SPI_DATA       (0x42001818U) /**< \brief (SERCOM4) SPI Data Register */
 #define REG_SERCOM4_USART_DATA     (0x42001818U) /**< \brief (SERCOM4) USART Data Register */
 #else
 #define REG_SERCOM4_I2CM_CTRLA     (*(RwReg  *)0x42001800U) /**< \brief (SERCOM4) I2CM Control Register A */
 #define REG_SERCOM4_I2CS_CTRLA     (*(RwReg  *)0x42001800U) /**< \brief (SERCOM4) I2CS Control Register A */
 #define REG_SERCOM4_SPI_CTRLA      (*(RwReg  *)0x42001800U) /**< \brief (SERCOM4) SPI Control Register A */
 #define REG_SERCOM4_USART_CTRLA    (*(RwReg  *)0x42001800U) /**< \brief (SERCOM4) USART Control Register A */
 #define REG_SERCOM4_I2CM_CTRLB     (*(RwReg  *)0x42001804U) /**< \brief (SERCOM4) I2CM Control Register B */
 #define REG_SERCOM4_I2CS_CTRLB     (*(RwReg  *)0x42001804U) /**< \brief (SERCOM4) I2CS Control Register B */
 #define REG_SERCOM4_SPI_CTRLB      (*(RwReg  *)0x42001804U) /**< \brief (SERCOM4) SPI Control Register B */
 #define REG_SERCOM4_USART_CTRLB    (*(RwReg  *)0x42001804U) /**< \brief (SERCOM4) USART Control Register B */
 #define REG_SERCOM4_I2CM_DBGCTRL   (*(RwReg8 *)0x42001808U) /**< \brief (SERCOM4) I2CM Debug Register */
 #define REG_SERCOM4_SPI_DBGCTRL    (*(RwReg8 *)0x42001808U) /**< \brief (SERCOM4) SPI Debug Register */
 #define REG_SERCOM4_USART_DBGCTRL  (*(RwReg8 *)0x42001808U) /**< \brief (SERCOM4) USART Debug Register */
 #define REG_SERCOM4_I2CM_BAUD      (*(RwReg16*)0x4200180AU) /**< \brief (SERCOM4) I2CM Baud Rate Register */
 #define REG_SERCOM4_SPI_BAUD       (*(RwReg8 *)0x4200180AU) /**< \brief (SERCOM4) SPI Baud Rate Register */
 #define REG_SERCOM4_USART_BAUD     (*(RwReg16*)0x4200180AU) /**< \brief (SERCOM4) USART Baud Rate Register */
 #define REG_SERCOM4_I2CM_INTENCLR  (*(RwReg8 *)0x4200180CU) /**< \brief (SERCOM4) I2CM Interrupt Enable Clear Register */
 #define REG_SERCOM4_I2CS_INTENCLR  (*(RwReg8 *)0x4200180CU) /**< \brief (SERCOM4) I2CS Interrupt Enable Clear Register */
 #define REG_SERCOM4_SPI_INTENCLR   (*(RwReg8 *)0x4200180CU) /**< \brief (SERCOM4) SPI Interrupt Enable Clear Register */
 #define REG_SERCOM4_USART_INTENCLR (*(RwReg8 *)0x4200180CU) /**< \brief (SERCOM4) USART Interrupt Enable Clear Register */
 #define REG_SERCOM4_I2CM_INTENSET  (*(RwReg8 *)0x4200180DU) /**< \brief (SERCOM4) I2CM Interrupt Enable Set Register */
 #define REG_SERCOM4_I2CS_INTENSET  (*(RwReg8 *)0x4200180DU) /**< \brief (SERCOM4) I2CS Interrupt Enable Set Register */
 #define REG_SERCOM4_SPI_INTENSET   (*(RwReg8 *)0x4200180DU) /**< \brief (SERCOM4) SPI Interrupt Enable Set Register */
 #define REG_SERCOM4_USART_INTENSET (*(RwReg8 *)0x4200180DU) /**< \brief (SERCOM4) USART Interrupt Enable Set Register */
 #define REG_SERCOM4_I2CM_INTFLAG   (*(RwReg8 *)0x4200180EU) /**< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear Register */
 #define REG_SERCOM4_I2CS_INTFLAG   (*(RwReg8 *)0x4200180EU) /**< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear Register */
 #define REG_SERCOM4_SPI_INTFLAG    (*(RwReg8 *)0x4200180EU) /**< \brief (SERCOM4) SPI Interrupt Flag Status and Clear Register */
 #define REG_SERCOM4_USART_INTFLAG  (*(RwReg8 *)0x4200180EU) /**< \brief (SERCOM4) USART Interrupt Flag Status and Clear Register */
 #define REG_SERCOM4_I2CM_STATUS    (*(RwReg16*)0x42001810U) /**< \brief (SERCOM4) I2CM Status Register */
 #define REG_SERCOM4_I2CS_STATUS    (*(RwReg16*)0x42001810U) /**< \brief (SERCOM4) I2CS Status Register */
 #define REG_SERCOM4_SPI_STATUS     (*(RwReg16*)0x42001810U) /**< \brief (SERCOM4) SPI Status Register */
 #define REG_SERCOM4_USART_STATUS   (*(RwReg16*)0x42001810U) /**< \brief (SERCOM4) USART Status Register */
 #define REG_SERCOM4_I2CM_ADDR      (*(RwReg8 *)0x42001814U) /**< \brief (SERCOM4) I2CM Address Register */
 #define REG_SERCOM4_I2CS_ADDR      (*(RwReg  *)0x42001814U) /**< \brief (SERCOM4) I2CS Address Register */
 #define REG_SERCOM4_SPI_ADDR       (*(RwReg  *)0x42001814U) /**< \brief (SERCOM4) SPI Address Register */
 #define REG_SERCOM4_I2CM_DATA      (*(RwReg8 *)0x42001818U) /**< \brief (SERCOM4) I2CM Data Register */
 #define REG_SERCOM4_I2CS_DATA      (*(RwReg8 *)0x42001818U) /**< \brief (SERCOM4) I2CS Data Register */
 #define REG_SERCOM4_SPI_DATA       (*(RwReg16*)0x42001818U) /**< \brief (SERCOM4) SPI Data Register */
 #define REG_SERCOM4_USART_DATA     (*(RwReg16*)0x42001818U) /**< \brief (SERCOM4) USART Data Register */
 #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

 /* ========== Instance parameters for SERCOM4 peripheral ========== */
 #define SERCOM4_GCLK_ID_CORE        17
 #define SERCOM4_GCLK_ID_SLOW        12
 #define SERCOM4_INT_MSB             3
 #define SERCOM4_PMSB                3

 #endif /* _SAMD20_SERCOM4_INSTANCE_ */
	/**
	* \file
	*
	* \brief Instance description for SERCOM4
	*
	* Copyright (c) 2013 Atmel Corporation. All rights reserved.
	*
	* \asf_license_start
	*
	* \page License
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* 1. Redistributions of source code must retain the above copyright notice,
	* this list of conditions and the following disclaimer.
	*
	* 2. Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* 3. The name of Atmel may not be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* 4. This software may only be redistributed and used in connection with an
	* Atmel microcontroller product.
	*
	* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
	* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
	* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
	* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
	* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*
	* \asf_license_stop
	*
	*/

	#ifndef _SAMD20_SERCOM4_INSTANCE_
	#define _SAMD20_SERCOM4_INSTANCE_

	/* ========== Register definition for SERCOM4 peripheral ========== */
	#if (defined(__ASSEMBLY__) \|\| defined(__IAR_SYSTEMS_ASM__))
	#define REG_SERCOM4_I2CM_CTRLA (0x42001800U) /*< \brief (SERCOM4) I2CM Control Register A /
	#define REG_SERCOM4_I2CS_CTRLA (0x42001800U) /*< \brief (SERCOM4) I2CS Control Register A /
	#define REG_SERCOM4_SPI_CTRLA (0x42001800U) /*< \brief (SERCOM4) SPI Control Register A /
	#define REG_SERCOM4_USART_CTRLA (0x42001800U) /*< \brief (SERCOM4) USART Control Register A /
	#define REG_SERCOM4_I2CM_CTRLB (0x42001804U) /*< \brief (SERCOM4) I2CM Control Register B /
	#define REG_SERCOM4_I2CS_CTRLB (0x42001804U) /*< \brief (SERCOM4) I2CS Control Register B /
	#define REG_SERCOM4_SPI_CTRLB (0x42001804U) /*< \brief (SERCOM4) SPI Control Register B /
	#define REG_SERCOM4_USART_CTRLB (0x42001804U) /*< \brief (SERCOM4) USART Control Register B /
	#define REG_SERCOM4_I2CM_DBGCTRL (0x42001808U) /*< \brief (SERCOM4) I2CM Debug Register /
	#define REG_SERCOM4_SPI_DBGCTRL (0x42001808U) /*< \brief (SERCOM4) SPI Debug Register /
	#define REG_SERCOM4_USART_DBGCTRL (0x42001808U) /*< \brief (SERCOM4) USART Debug Register /
	#define REG_SERCOM4_I2CM_BAUD (0x4200180AU) /*< \brief (SERCOM4) I2CM Baud Rate Register /
	#define REG_SERCOM4_SPI_BAUD (0x4200180AU) /*< \brief (SERCOM4) SPI Baud Rate Register /
	#define REG_SERCOM4_USART_BAUD (0x4200180AU) /*< \brief (SERCOM4) USART Baud Rate Register /
	#define REG_SERCOM4_I2CM_INTENCLR (0x4200180CU) /*< \brief (SERCOM4) I2CM Interrupt Enable Clear Register /
	#define REG_SERCOM4_I2CS_INTENCLR (0x4200180CU) /*< \brief (SERCOM4) I2CS Interrupt Enable Clear Register /
	#define REG_SERCOM4_SPI_INTENCLR (0x4200180CU) /*< \brief (SERCOM4) SPI Interrupt Enable Clear Register /
	#define REG_SERCOM4_USART_INTENCLR (0x4200180CU) /*< \brief (SERCOM4) USART Interrupt Enable Clear Register /
	#define REG_SERCOM4_I2CM_INTENSET (0x4200180DU) /*< \brief (SERCOM4) I2CM Interrupt Enable Set Register /
	#define REG_SERCOM4_I2CS_INTENSET (0x4200180DU) /*< \brief (SERCOM4) I2CS Interrupt Enable Set Register /
	#define REG_SERCOM4_SPI_INTENSET (0x4200180DU) /*< \brief (SERCOM4) SPI Interrupt Enable Set Register /
	#define REG_SERCOM4_USART_INTENSET (0x4200180DU) /*< \brief (SERCOM4) USART Interrupt Enable Set Register /
	#define REG_SERCOM4_I2CM_INTFLAG (0x4200180EU) /*< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear Register /
	#define REG_SERCOM4_I2CS_INTFLAG (0x4200180EU) /*< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear Register /
	#define REG_SERCOM4_SPI_INTFLAG (0x4200180EU) /*< \brief (SERCOM4) SPI Interrupt Flag Status and Clear Register /
	#define REG_SERCOM4_USART_INTFLAG (0x4200180EU) /*< \brief (SERCOM4) USART Interrupt Flag Status and Clear Register /
	#define REG_SERCOM4_I2CM_STATUS (0x42001810U) /*< \brief (SERCOM4) I2CM Status Register /
	#define REG_SERCOM4_I2CS_STATUS (0x42001810U) /*< \brief (SERCOM4) I2CS Status Register /
	#define REG_SERCOM4_SPI_STATUS (0x42001810U) /*< \brief (SERCOM4) SPI Status Register /
	#define REG_SERCOM4_USART_STATUS (0x42001810U) /*< \brief (SERCOM4) USART Status Register /
	#define REG_SERCOM4_I2CM_ADDR (0x42001814U) /*< \brief (SERCOM4) I2CM Address Register /
	#define REG_SERCOM4_I2CS_ADDR (0x42001814U) /*< \brief (SERCOM4) I2CS Address Register /
	#define REG_SERCOM4_SPI_ADDR (0x42001814U) /*< \brief (SERCOM4) SPI Address Register /
	#define REG_SERCOM4_I2CM_DATA (0x42001818U) /*< \brief (SERCOM4) I2CM Data Register /
	#define REG_SERCOM4_I2CS_DATA (0x42001818U) /*< \brief (SERCOM4) I2CS Data Register /
	#define REG_SERCOM4_SPI_DATA (0x42001818U) /*< \brief (SERCOM4) SPI Data Register /
	#define REG_SERCOM4_USART_DATA (0x42001818U) /*< \brief (SERCOM4) USART Data Register /
	#else
	#define REG_SERCOM4_I2CM_CTRLA ((RwReg )0x42001800U) /*< \brief (SERCOM4) I2CM Control Register A /
	#define REG_SERCOM4_I2CS_CTRLA ((RwReg )0x42001800U) /*< \brief (SERCOM4) I2CS Control Register A /
	#define REG_SERCOM4_SPI_CTRLA ((RwReg )0x42001800U) /*< \brief (SERCOM4) SPI Control Register A /
	#define REG_SERCOM4_USART_CTRLA ((RwReg )0x42001800U) /*< \brief (SERCOM4) USART Control Register A /
	#define REG_SERCOM4_I2CM_CTRLB ((RwReg )0x42001804U) /*< \brief (SERCOM4) I2CM Control Register B /
	#define REG_SERCOM4_I2CS_CTRLB ((RwReg )0x42001804U) /*< \brief (SERCOM4) I2CS Control Register B /
	#define REG_SERCOM4_SPI_CTRLB ((RwReg )0x42001804U) /*< \brief (SERCOM4) SPI Control Register B /
	#define REG_SERCOM4_USART_CTRLB ((RwReg )0x42001804U) /*< \brief (SERCOM4) USART Control Register B /
	#define REG_SERCOM4_I2CM_DBGCTRL ((RwReg8 )0x42001808U) /*< \brief (SERCOM4) I2CM Debug Register /
	#define REG_SERCOM4_SPI_DBGCTRL ((RwReg8 )0x42001808U) /*< \brief (SERCOM4) SPI Debug Register /
	#define REG_SERCOM4_USART_DBGCTRL ((RwReg8 )0x42001808U) /*< \brief (SERCOM4) USART Debug Register /
	#define REG_SERCOM4_I2CM_BAUD ((RwReg16)0x4200180AU) /*< \brief (SERCOM4) I2CM Baud Rate Register /
	#define REG_SERCOM4_SPI_BAUD ((RwReg8 )0x4200180AU) /*< \brief (SERCOM4) SPI Baud Rate Register /
	#define REG_SERCOM4_USART_BAUD ((RwReg16)0x4200180AU) /*< \brief (SERCOM4) USART Baud Rate Register /
	#define REG_SERCOM4_I2CM_INTENCLR ((RwReg8 )0x4200180CU) /*< \brief (SERCOM4) I2CM Interrupt Enable Clear Register /
	#define REG_SERCOM4_I2CS_INTENCLR ((RwReg8 )0x4200180CU) /*< \brief (SERCOM4) I2CS Interrupt Enable Clear Register /
	#define REG_SERCOM4_SPI_INTENCLR ((RwReg8 )0x4200180CU) /*< \brief (SERCOM4) SPI Interrupt Enable Clear Register /
	#define REG_SERCOM4_USART_INTENCLR ((RwReg8 )0x4200180CU) /*< \brief (SERCOM4) USART Interrupt Enable Clear Register /
	#define REG_SERCOM4_I2CM_INTENSET ((RwReg8 )0x4200180DU) /*< \brief (SERCOM4) I2CM Interrupt Enable Set Register /
	#define REG_SERCOM4_I2CS_INTENSET ((RwReg8 )0x4200180DU) /*< \brief (SERCOM4) I2CS Interrupt Enable Set Register /
	#define REG_SERCOM4_SPI_INTENSET ((RwReg8 )0x4200180DU) /*< \brief (SERCOM4) SPI Interrupt Enable Set Register /
	#define REG_SERCOM4_USART_INTENSET ((RwReg8 )0x4200180DU) /*< \brief (SERCOM4) USART Interrupt Enable Set Register /
	#define REG_SERCOM4_I2CM_INTFLAG ((RwReg8 )0x4200180EU) /*< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear Register /
	#define REG_SERCOM4_I2CS_INTFLAG ((RwReg8 )0x4200180EU) /*< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear Register /
	#define REG_SERCOM4_SPI_INTFLAG ((RwReg8 )0x4200180EU) /*< \brief (SERCOM4) SPI Interrupt Flag Status and Clear Register /
	#define REG_SERCOM4_USART_INTFLAG ((RwReg8 )0x4200180EU) /*< \brief (SERCOM4) USART Interrupt Flag Status and Clear Register /
	#define REG_SERCOM4_I2CM_STATUS ((RwReg16)0x42001810U) /*< \brief (SERCOM4) I2CM Status Register /
	#define REG_SERCOM4_I2CS_STATUS ((RwReg16)0x42001810U) /*< \brief (SERCOM4) I2CS Status Register /
	#define REG_SERCOM4_SPI_STATUS ((RwReg16)0x42001810U) /*< \brief (SERCOM4) SPI Status Register /
	#define REG_SERCOM4_USART_STATUS ((RwReg16)0x42001810U) /*< \brief (SERCOM4) USART Status Register /
	#define REG_SERCOM4_I2CM_ADDR ((RwReg8 )0x42001814U) /*< \brief (SERCOM4) I2CM Address Register /
	#define REG_SERCOM4_I2CS_ADDR ((RwReg )0x42001814U) /*< \brief (SERCOM4) I2CS Address Register /
	#define REG_SERCOM4_SPI_ADDR ((RwReg )0x42001814U) /*< \brief (SERCOM4) SPI Address Register /
	#define REG_SERCOM4_I2CM_DATA ((RwReg8 )0x42001818U) /*< \brief (SERCOM4) I2CM Data Register /
	#define REG_SERCOM4_I2CS_DATA ((RwReg8 )0x42001818U) /*< \brief (SERCOM4) I2CS Data Register /
	#define REG_SERCOM4_SPI_DATA ((RwReg16)0x42001818U) /*< \brief (SERCOM4) SPI Data Register /
	#define REG_SERCOM4_USART_DATA ((RwReg16)0x42001818U) /*< \brief (SERCOM4) USART Data Register /
	#endif /* (defined(__ASSEMBLY__) \|\| defined(__IAR_SYSTEMS_ASM__)) */

	/* ========== Instance parameters for SERCOM4 peripheral ========== */
	#define SERCOM4_GCLK_ID_CORE 17
	#define SERCOM4_GCLK_ID_SLOW 12
	#define SERCOM4_INT_MSB 3
	#define SERCOM4_PMSB 3

	#endif /* _SAMD20_SERCOM4_INSTANCE_ */