blob: 7d064c2438e153d6349d84d38d607f2375342b3c [file] [log] [blame]
/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name : stm32f10x_conf.h
* Author : MCD Application Team
* Version : V2.0.1
* Date : 06/13/2008
* Description : Library configuration file.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_CONF_H
#define __STM32F10x_CONF_H
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_type.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Uncomment the line below to compile the library in DEBUG mode, this will expanse
the "assert_param" macro in the firmware library code (see "Exported macro"
section below) */
/*#define DEBUG 1*/
/* Comment the line below to disable the specific peripheral inclusion */
/************************************* ADC ************************************/
//#define _ADC
//#define _ADC1
//#define _ADC2
//#define _ADC3
/************************************* BKP ************************************/
//#define _BKP
/************************************* CAN ************************************/
#define _CAN
/************************************* CRC ************************************/
//#define _CRC
/************************************* DAC ************************************/
//#define _DAC
/************************************* DBGMCU *********************************/
//#define _DBGMCU
/************************************* DMA ************************************/
//#define _DMA
//#define _DMA1_Channel1
//#define _DMA1_Channel2
//#define _DMA1_Channel3
//#define _DMA1_Channel4
//#define _DMA1_Channel5
//#define _DMA1_Channel6
//#define _DMA1_Channel7
//#define _DMA2_Channel1
//#define _DMA2_Channel2
//#define _DMA2_Channel3
//#define _DMA2_Channel4
//#define _DMA2_Channel5
/************************************* EXTI ***********************************/
//#define _EXTI
/************************************* FLASH and Option Bytes *****************/
#define _FLASH
/* Uncomment the line below to enable FLASH program/erase/protections functions,
otherwise only FLASH configuration (latency, prefetch, half cycle) functions
are enabled */
/* #define _FLASH_PROG */
/************************************* FSMC ***********************************/
//#define _FSMC
/************************************* GPIO ***********************************/
#define _GPIO
#define _GPIOA
#define _GPIOB
#define _GPIOC
#define _GPIOD
#define _GPIOE
//#define _GPIOF
//#define _GPIOG
#define _AFIO
/************************************* I2C ************************************/
#define _I2C
#define _I2C1
//#define _I2C2
/************************************* IWDG ***********************************/
//#define _IWDG
/************************************* NVIC ***********************************/
#define _NVIC
/************************************* PWR ************************************/
//#define _PWR
/************************************* RCC ************************************/
#define _RCC
/************************************* RTC ************************************/
//#define _RTC
/************************************* SDIO ***********************************/
//#define _SDIO
/************************************* SPI ************************************/
#define _SPI
#define _SPI1
#define _SPI2
//#define _SPI3
/************************************* SysTick ********************************/
#define _SysTick
/************************************* TIM ************************************/
//#define _TIM
//#define _TIM1
//#define _TIM2
//#define _TIM3
//#define _TIM4
//#define _TIM5
//#define _TIM6
//#define _TIM7
//#define _TIM8
/************************************* USART **********************************/
#define _USART
#define _USART1
#define _USART2
//#define _USART3
//#define _UART4
//#define _UART5
/************************************* WWDG ***********************************/
//#define _WWDG
/* In the following line adjust the value of External High Speed oscillator (HSE)
used in your application */
#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/
/* Exported macro ------------------------------------------------------------*/
#ifdef DEBUG
/*******************************************************************************
* Macro Name : assert_param
* Description : The assert_param macro is used for function's parameters check.
* It is used only if the library is compiled in DEBUG mode.
* Input : - expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* Return : None
*******************************************************************************/
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(u8* file, u32 line);
#else
#define assert_param(expr) ((void)0)
#endif /* DEBUG */
#endif /* __STM32F10x_CONF_H */
/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/