blob: bc1ca1a57b8113e5c93bdd5d064d613b5da64960 [file] [log] [blame]
/** ###################################################################
** THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
** Filename : PE_Error.H
** Project : RTOSDemo
** Processor : MC9S12DP256BCPV
** Beantype : PE_Error
** Version : Driver 01.00
** Compiler : Metrowerks HC12 C Compiler
** Date/Time : 13/06/2005, 20:14
** Abstract :
** This bean "PE_Error" contains internal definitions
** of the error constants.
** Settings :
** Contents :
** No public methods
**
** (c) Copyright UNIS, spol. s r.o. 1997-2002
** UNIS, spol. s r.o.
** Jundrovska 33
** 624 00 Brno
** Czech Republic
** http : www.processorexpert.com
** mail : info@processorexpert.com
** ###################################################################*/
#ifndef __PE_Error_H
#define __PE_Error_H
#define ERR_OK 0 /* OK */
#define ERR_SPEED 1 /* This device does not work in the active speed mode. */
#define ERR_RANGE 2 /* Parameter out of range. */
#define ERR_VALUE 3 /* Parameter of incorrect value. */
#define ERR_OVERFLOW 4 /* Timer overflow. */
#define ERR_MATH 5 /* Overflow during evaluation. */
#define ERR_ENABLED 6 /* Device is enabled. */
#define ERR_DISABLED 7 /* Device is disabled. */
#define ERR_BUSY 8 /* Device is busy. */
#define ERR_NOTAVAIL 9 /* Requested value or method not available. */
#define ERR_RXEMPTY 10 /* No data in receiver. */
#define ERR_TXFULL 11 /* Transmitter is full. */
#define ERR_BUSOFF 12 /* Bus not available. */
#define ERR_OVERRUN 13 /* Overrun error is detected. */
#define ERR_FRAMING 14 /* Framing error is detected. */
#define ERR_PARITY 15 /* Parity error is detected. */
#define ERR_NOISE 16 /* Noise error is detected. */
#define ERR_IDLE 17 /* Idle error is detectes. */
#define ERR_FAULT 18 /* Fault error is detected. */
#define ERR_BREAK 19 /* Break char is received during communication. */
#define ERR_CRC 20 /* CRC error is detected. */
#define ERR_ARBITR 21 /* A node losts arbitration. This error occurs if two nodes start transmission at the same time. */
#define ERR_PROTECT 22 /* Protection error is detected. */
#endif //__PE_Error_H