FreeRTOS/Demo/MB96340_Softune/FreeRTOS_96348hs_SK16FX100PMC/readme.txt - nest-detect/1.0.2/freertos - Git at Google

 ==========================================================================
                    Template Project for MB96348HS Series
 ==========================================================================
                    Fujitsu Microelectronics Europe GmbH

  The following  software  is for  demonstration  purposes only.  It is not
  fully  tested, nor validated  in order  to fullfill  its task  under  all
  circumstances.  Therefore,  this software or  any part of it must only be
  used in an evaluation laboratory environment.
  This software is subject to the rules of our standard DISCLAIMER, that is
  delivered with our SW-tools on the Fujitsu Microcontrollers DVD
  (V5.0 or higher "\START.HTM").
 ==========================================================================

 History
 Date        Ver     Author  Softune     Description
 2007-10-29  1.0     MPi     V30L33R11   original version
 2007-11-02  1.1     MPi     V30L33R11   Added the watchdog functionality
 										Used vTaskStartScheduler() instead
 										of xPortStartScheduler()
 2007-11-12  1.2     MPi     V30L33R11   Updated FreeRTOS 4.6.1 and tested
 2007-11-23  1.3     MPi     V30L33R11   Seperated watchdog functionality in watchdog.c
 										and watchdog.h
 2008-01-03  1.4     MPi     V30L33R11   Added portYIELDFromISR() and now all the
 										demo application functions are working.
 2008-01-04  1.5     MPi     V30L33R11   Updated FreeRTOS 4.7.0 and tested
 2008-01-10  1.6     MPi     V30L33R11   Replaced INT9 with INT #122 in macro portYIELD()
 2008-01-14  1.7     MPi     V30L33R11   Modified the code to work with  SK-16FX-100PMC V1.1
 2008-01-15  1.8     MPi     V30L33R11   Integrated SVN releases 1.5 and 1.6.
 ==========================================================================
 1.0.
 This is a project is to test the FreeRTOS port for 16FX and the demo application
 which runs on FLASH-CAN-100P-240.

 This FreeRTOS port uses the Task Stack pointed by User Stack pointer (USB:USP) for
 tasks and the system stack pointed by System Stack pointer (SSB:SSP) for everything
 else.

 This port is tested with MEDIUM and LARGE memory model and seems to be working fine.
 The define MEMMODEL has to be configured in order to use the corresponding memory
 model.

 This port doesnt use any register banking and always uses bank 0. It also consider that
 the parameters to the tasks is passed via stack and not via registers.

 In this port the implemetation of portENTER_CRITICAL() and portEXIT_CRITICAL() macros
 is changed in order to make them more efficient. Now usCriticalNesting variable is not
 used to keep track of global interrupt enable. Rather the current PS is stored on to
 the stack and interrupts are disabled for portENTER_CRITICAL(). And for portEXIT_CRITICAL()
 simply the PS is restored from stack.

 1.1.
 In this port, the functionality is added to initialize and clear the watchdog in the
 dedicated task, Tick Hook or the Idle Hook. The place exactly where the wtachdog can be
 cleared can be configured. Though Idle Hook is not an approproiate place to clear the
 watchdog, its done here for demonstration purpose only.

 Also from Main function vTaskStartScheduler() function is called instead of xPortStartScheduler().
 After doing this change now no more IDLE task is required to be added seperately as
 vTaskStartScheduler() adds prvIdleTask() on its own.

 1.2.
 Updated the FreeRTOS version to 4.6.1 and tested with the same.

 1.3.
 Moved the watchdog functionality to watchdog.c and watchdog.h.

 1.4.
 Added portYIELDFromISR() which uses delayed interrupt. This macro needs to be used from the
 application ISRs in order to force a context switch from them if required. It should be noted
 that the interrupt priority of such application ISRs MUST be always higher than the dealyed
 interrupt (currently 23) in order to perform the context switch correctly.

 It should be also noted that the RLT0 and Delayed Interrupt priority MUST be always same in order
 to assure correct working of this port.

 Now portYIELD() used software interrupt INT9 instead of delayed interrupt.

 Now all the queue functions works ok.

 Tested with the heap_1.c, heap_2.c and heap_3.c.

 At one time, either of heap_1.c or heap_2.c or heap_3.c needs to be used. Hence the files those are not
 required to be used should be removed from the target of the build.

 Added the __STD_LIB_sbrk.c file in order to define the *sbrk() function. This is required while using
 heap_3.c file which uses the dynamic memory allocation.

 Made changes to the demo application files crhook.c. Please refer the file and grep for "Added by MPi"
 to find the changes. It should be noted that if INCLUDE_StartHookCoRoutines is defined as 0 (i.e. if
 vStartHookCoRoutines() functionality is NOT required) then crhook.c file should be removed from target
 build and uncomment the vApplicationTickHook() function from main.c should be uncommnented.

 Added taskutility.c file. This file contains vUART2Task() which calls vTaskList() and vTaskStartTrace()
 functions.

 If vCreateBlockTimeTasks() is not called then the LED at PDR00_P7 blinks at normal rate (3s).

 This port is tested with MEDIUM and LARGE memory model and working fine.

 configMINIMAL_STACK_SIZE value changed to 172 from 70 in order to make the port work.

 1.5.
 Updated the FreeRTOS version to 4.7.0 and tested with the same. Tested for pre-emptive as well as
 co-operative approach.

 1.6.
 portYIELD() macro now uses INT #122 instead of INT9.

 Optimized functions vParTestToggleLED() and vParTestSetLED() in main.c.

 Now watchdog uses 2^23 as clock prescaler instead of 2^24. Also updated the WTC_CLR_PER in watchdog.h.

 1.7.
 Modified the code to work with  SK-16FX-100PMC V1.1.

 Made changes to the demo application files crflash.c. Please refer the file and grep for "Added by MPi"
 to find the changes.

 Made changes to taskutility.c and vectors.c in order to use UART1 instead of UART2.

 Made changes to main.c file in order to handle use the 7-segment display (SEG1) connected to Port09 for tasks
 and 7-segment display (SEG2) connected to Port00 for co-routines.

 Added config.h and moved the demo application configs there.

 1.8.
 It should be noted that the readme, appnote and SVN tag version numbers may be different for the same release.

 This readme is specific to project FreeRTOS_96348hs_SK16FX100PMC. And this project specifically works
 on board SK-16FX-100PMC V1.1 along with EUROScope debugger.

 Created 4 different configuration Config_1 to Config_4. Each config includes certain demo application function.
 More details specific to each configuration can be found in the appnote.

 Used relative path to include files instead of absolute.

 Created config, MemMang, serial and utility subdirectories and moved corresponding functionlaity there.

 Updated config.h, main.c and start.asm in order to have configuration specific build.

 Clock settings:
 ---------------
 Crystal:  4 MHz
 CLKB:    56 MHz
 CLKP1:   56 MHz
 CLKP2:   56 MHz
	==========================================================================
	Template Project for MB96348HS Series
	==========================================================================
	Fujitsu Microelectronics Europe GmbH

	The following software is for demonstration purposes only. It is not
	fully tested, nor validated in order to fullfill its task under all
	circumstances. Therefore, this software or any part of it must only be
	used in an evaluation laboratory environment.
	This software is subject to the rules of our standard DISCLAIMER, that is
	delivered with our SW-tools on the Fujitsu Microcontrollers DVD
	(V5.0 or higher "\START.HTM").
	==========================================================================

	History
	Date Ver Author Softune Description
	2007-10-29 1.0 MPi V30L33R11 original version
	2007-11-02 1.1 MPi V30L33R11 Added the watchdog functionality
	Used vTaskStartScheduler() instead
	of xPortStartScheduler()
	2007-11-12 1.2 MPi V30L33R11 Updated FreeRTOS 4.6.1 and tested
	2007-11-23 1.3 MPi V30L33R11 Seperated watchdog functionality in watchdog.c
	and watchdog.h
	2008-01-03 1.4 MPi V30L33R11 Added portYIELDFromISR() and now all the
	demo application functions are working.
	2008-01-04 1.5 MPi V30L33R11 Updated FreeRTOS 4.7.0 and tested
	2008-01-10 1.6 MPi V30L33R11 Replaced INT9 with INT #122 in macro portYIELD()
	2008-01-14 1.7 MPi V30L33R11 Modified the code to work with SK-16FX-100PMC V1.1
	2008-01-15 1.8 MPi V30L33R11 Integrated SVN releases 1.5 and 1.6.
	==========================================================================
	1.0.
	This is a project is to test the FreeRTOS port for 16FX and the demo application
	which runs on FLASH-CAN-100P-240.

	This FreeRTOS port uses the Task Stack pointed by User Stack pointer (USB:USP) for
	tasks and the system stack pointed by System Stack pointer (SSB:SSP) for everything
	else.

	This port is tested with MEDIUM and LARGE memory model and seems to be working fine.
	The define MEMMODEL has to be configured in order to use the corresponding memory
	model.

	This port doesnt use any register banking and always uses bank 0. It also consider that
	the parameters to the tasks is passed via stack and not via registers.

	In this port the implemetation of portENTER_CRITICAL() and portEXIT_CRITICAL() macros
	is changed in order to make them more efficient. Now usCriticalNesting variable is not
	used to keep track of global interrupt enable. Rather the current PS is stored on to
	the stack and interrupts are disabled for portENTER_CRITICAL(). And for portEXIT_CRITICAL()
	simply the PS is restored from stack.

	1.1.
	In this port, the functionality is added to initialize and clear the watchdog in the
	dedicated task, Tick Hook or the Idle Hook. The place exactly where the wtachdog can be
	cleared can be configured. Though Idle Hook is not an approproiate place to clear the
	watchdog, its done here for demonstration purpose only.

	Also from Main function vTaskStartScheduler() function is called instead of xPortStartScheduler().
	After doing this change now no more IDLE task is required to be added seperately as
	vTaskStartScheduler() adds prvIdleTask() on its own.

	1.2.
	Updated the FreeRTOS version to 4.6.1 and tested with the same.

	1.3.
	Moved the watchdog functionality to watchdog.c and watchdog.h.

	1.4.
	Added portYIELDFromISR() which uses delayed interrupt. This macro needs to be used from the
	application ISRs in order to force a context switch from them if required. It should be noted
	that the interrupt priority of such application ISRs MUST be always higher than the dealyed
	interrupt (currently 23) in order to perform the context switch correctly.

	It should be also noted that the RLT0 and Delayed Interrupt priority MUST be always same in order
	to assure correct working of this port.

	Now portYIELD() used software interrupt INT9 instead of delayed interrupt.

	Now all the queue functions works ok.

	Tested with the heap_1.c, heap_2.c and heap_3.c.

	At one time, either of heap_1.c or heap_2.c or heap_3.c needs to be used. Hence the files those are not
	required to be used should be removed from the target of the build.

	Added the __STD_LIB_sbrk.c file in order to define the *sbrk() function. This is required while using
	heap_3.c file which uses the dynamic memory allocation.

	Made changes to the demo application files crhook.c. Please refer the file and grep for "Added by MPi"
	to find the changes. It should be noted that if INCLUDE_StartHookCoRoutines is defined as 0 (i.e. if
	vStartHookCoRoutines() functionality is NOT required) then crhook.c file should be removed from target
	build and uncomment the vApplicationTickHook() function from main.c should be uncommnented.

	Added taskutility.c file. This file contains vUART2Task() which calls vTaskList() and vTaskStartTrace()
	functions.

	If vCreateBlockTimeTasks() is not called then the LED at PDR00_P7 blinks at normal rate (3s).

	This port is tested with MEDIUM and LARGE memory model and working fine.

	configMINIMAL_STACK_SIZE value changed to 172 from 70 in order to make the port work.

	1.5.
	Updated the FreeRTOS version to 4.7.0 and tested with the same. Tested for pre-emptive as well as
	co-operative approach.

	1.6.
	portYIELD() macro now uses INT #122 instead of INT9.

	Optimized functions vParTestToggleLED() and vParTestSetLED() in main.c.

	Now watchdog uses 2^23 as clock prescaler instead of 2^24. Also updated the WTC_CLR_PER in watchdog.h.

	1.7.
	Modified the code to work with SK-16FX-100PMC V1.1.

	Made changes to the demo application files crflash.c. Please refer the file and grep for "Added by MPi"
	to find the changes.

	Made changes to taskutility.c and vectors.c in order to use UART1 instead of UART2.

	Made changes to main.c file in order to handle use the 7-segment display (SEG1) connected to Port09 for tasks
	and 7-segment display (SEG2) connected to Port00 for co-routines.

	Added config.h and moved the demo application configs there.

	1.8.
	It should be noted that the readme, appnote and SVN tag version numbers may be different for the same release.

	This readme is specific to project FreeRTOS_96348hs_SK16FX100PMC. And this project specifically works
	on board SK-16FX-100PMC V1.1 along with EUROScope debugger.

	Created 4 different configuration Config_1 to Config_4. Each config includes certain demo application function.
	More details specific to each configuration can be found in the appnote.

	Used relative path to include files instead of absolute.

	Created config, MemMang, serial and utility subdirectories and moved corresponding functionlaity there.

	Updated config.h, main.c and start.asm in order to have configuration specific build.

	Clock settings:
	---------------
	Crystal: 4 MHz
	CLKB: 56 MHz
	CLKP1: 56 MHz
	CLKP2: 56 MHz