blob: fc6e1153005dff96f4353f04141f6600ece3be9a [file] [log] [blame]
#################################################################
# Makefile generated by Xilinx Platform Studio
# Project:C:\E\temp\rc\3\V5.0.2\FreeRTOS\Demo\PPC405_Xilinx_Virtex4_GCC\system.xmp
#
# WARNING : This file will be re-generated every time a command
# to run a make target is invoked. So, any changes made to this
# file manually, will be lost when make is invoked next.
#################################################################
XILINX_EDK_DIR = /cygdrive/c/devtools/Xilinx/10.1/EDK
NON_CYG_XILINX_EDK_DIR = C:/devtools/Xilinx/10.1/EDK
SYSTEM = system
MHSFILE = system.mhs
MSSFILE = system.mss
FPGA_ARCH = virtex4
DEVICE = xc4vfx12ff668-10
LANGUAGE = vhdl
SEARCHPATHOPT =
SUBMODULE_OPT =
PLATGEN_OPTIONS = -p $(DEVICE) -lang $(LANGUAGE) $(SEARCHPATHOPT) $(SUBMODULE_OPT)
LIBGEN_OPTIONS = -mhs $(MHSFILE) -p $(DEVICE) $(SEARCHPATHOPT)
VPGEN_OPTIONS = -p $(DEVICE) $(SEARCHPATHOPT)
MANAGE_FASTRT_OPTIONS = -reduce_fanout no
OBSERVE_PAR_OPTIONS = -error yes
RTOSDEMO_OUTPUT_DIR = RTOSDemo
RTOSDEMO_OUTPUT = $(RTOSDEMO_OUTPUT_DIR)/executable.elf
MICROBLAZE_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/microblaze/mb_bootloop.elf
PPC405_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/ppc405/ppc_bootloop.elf
PPC440_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/ppc440/ppc440_bootloop.elf
BOOTLOOP_DIR = bootloops
PPC405_0_BOOTLOOP = $(BOOTLOOP_DIR)/ppc405_0.elf
BRAMINIT_ELF_FILES =
BRAMINIT_ELF_FILE_ARGS =
ALL_USER_ELF_FILES = $(RTOSDEMO_OUTPUT)
SIM_CMD = vsim
BEHAVIORAL_SIM_SCRIPT = simulation/behavioral/$(SYSTEM)_setup.do
STRUCTURAL_SIM_SCRIPT = simulation/structural/$(SYSTEM)_setup.do
TIMING_SIM_SCRIPT = simulation/timing/$(SYSTEM)_setup.do
DEFAULT_SIM_SCRIPT = $(BEHAVIORAL_SIM_SCRIPT)
MIX_LANG_SIM_OPT = -mixed yes
SIMGEN_OPTIONS = -p $(DEVICE) -lang $(LANGUAGE) $(SEARCHPATHOPT) $(BRAMINIT_ELF_FILE_ARGS) $(MIX_LANG_SIM_OPT) -s mti -X C:/E/temp/rc/3/V5.0.2/FreeRTOS/Demo/PPC405_Xilinx_Virtex4_GCC/ -E C:/E/temp/rc/3/V5.0.2/FreeRTOS/Demo/PPC405_Xilinx_Virtex4_GCC/
LIBRARIES = \
ppc405_0/lib/libxil.a
VPEXEC = virtualplatform/vpexec.exe
LIBSCLEAN_TARGETS = ppc405_0_libsclean
PROGRAMCLEAN_TARGETS = RTOSDemo_programclean
CORE_STATE_DEVELOPMENT_FILES =
WRAPPER_NGC_FILES = implementation/ppc405_0_wrapper.ngc \
implementation/jtagppc_0_wrapper.ngc \
implementation/plb_wrapper.ngc \
implementation/rs232_uart_wrapper.ngc \
implementation/leds_4bit_wrapper.ngc \
implementation/leds_positions_wrapper.ngc \
implementation/sysace_compactflash_wrapper.ngc \
implementation/sram_wrapper.ngc \
implementation/sram_util_bus_split_0_wrapper.ngc \
implementation/clock_generator_0_wrapper.ngc \
implementation/proc_sys_reset_0_wrapper.ngc \
implementation/xps_intc_0_wrapper.ngc
POSTSYN_NETLIST = implementation/$(SYSTEM).ngc
SYSTEM_BIT = implementation/$(SYSTEM).bit
DOWNLOAD_BIT = implementation/download.bit
SYSTEM_ACE = implementation/$(SYSTEM).ace
UCF_FILE = data/system.ucf
BMM_FILE = implementation/$(SYSTEM).bmm
BITGEN_UT_FILE = etc/bitgen.ut
XFLOW_OPT_FILE = etc/fast_runtime.opt
XFLOW_DEPENDENCY = __xps/xpsxflow.opt $(XFLOW_OPT_FILE)
XPLORER_DEPENDENCY = __xps/xplorer.opt
XPLORER_OPTIONS = -p $(DEVICE) -uc $(SYSTEM).ucf -bm $(SYSTEM).bmm -max_runs 7
FPGA_IMP_DEPENDENCY = $(BMM_FILE) $(POSTSYN_NETLIST) $(UCF_FILE) $(BITGEN_UT_FILE) $(XFLOW_DEPENDENCY)
#################################################################
# SOFTWARE APPLICATION RTOSDEMO
#################################################################
RTOSDEMO_SOURCES = RTOSDemo/../../Common/Minimal/BlockQ.c RTOSDemo/../../Common/Minimal/blocktim.c RTOSDemo/../../Common/Minimal/comtest.c RTOSDemo/../../Common/Minimal/countsem.c RTOSDemo/../../Common/Minimal/death.c RTOSDemo/../../Common/Minimal/dynamic.c RTOSDemo/../../Common/Minimal/flash.c RTOSDemo/../../Common/Minimal/GenQTest.c RTOSDemo/../../Common/Minimal/integer.c RTOSDemo/../../Common/Minimal/QPeek.c RTOSDemo/../../Common/Minimal/recmutex.c RTOSDemo/../../Common/Minimal/semtest.c RTOSDemo/../../../Source/tasks.c RTOSDemo/../../../Source/list.c RTOSDemo/../../../Source/queue.c RTOSDemo/../../../Source/portable/GCC/PPC405_Xilinx/port.c RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c RTOSDemo/../../../Source/portable/GCC/PPC405_Xilinx/portasm.S RTOSDemo/../../../Source/portable/MemMang/heap_2.c RTOSDemo/flop/flop.c RTOSDemo/flop/flop-reg-test.c
RTOSDEMO_HEADERS = RTOSDemo/FreeRTOSConfig.h
RTOSDEMO_CC = powerpc-eabi-gcc
RTOSDEMO_CC_SIZE = powerpc-eabi-size
RTOSDEMO_CC_OPT = -O0
RTOSDEMO_CFLAGS = -I./RTOSDemo/flop -I../../Source/portable/GCC/PPC405_Xilinx -I./ppc405_0/include/ -IRTOSDemo/ -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -D GCC_PPC405 -mregnames
RTOSDEMO_CC_SEARCH = # -B
RTOSDEMO_LIBPATH = -L./ppc405_0/lib/ # -L
RTOSDEMO_INCLUDES = -I./ppc405_0/include/ -IRTOSDemo/ # -I
RTOSDEMO_LFLAGS = # -l
RTOSDEMO_LINKER_SCRIPT = RTOSDemo/RTOSDemo_linker_script.ld
RTOSDEMO_LINKER_SCRIPT_FLAG = -Wl,-T -Wl,$(RTOSDEMO_LINKER_SCRIPT)
RTOSDEMO_CC_DEBUG_FLAG = -g
RTOSDEMO_CC_PROFILE_FLAG = # -pg
RTOSDEMO_CC_GLOBPTR_FLAG= # -msdata=eabi
RTOSDEMO_CC_INFERRED_FLAGS=
RTOSDEMO_CC_START_ADDR_FLAG= # # -Wl,-defsym -Wl,_START_ADDR=
RTOSDEMO_CC_STACK_SIZE_FLAG= # # -Wl,-defsym -Wl,_STACK_SIZE=
RTOSDEMO_CC_HEAP_SIZE_FLAG= # # -Wl,-defsym -Wl,_HEAP_SIZE=
RTOSDEMO_OTHER_CC_FLAGS= $(RTOSDEMO_CC_GLOBPTR_FLAG) \
$(RTOSDEMO_CC_START_ADDR_FLAG) $(RTOSDEMO_CC_STACK_SIZE_FLAG) $(RTOSDEMO_CC_HEAP_SIZE_FLAG) \
$(RTOSDEMO_CC_INFERRED_FLAGS) \
$(RTOSDEMO_LINKER_SCRIPT_FLAG) $(RTOSDEMO_CC_DEBUG_FLAG) $(RTOSDEMO_CC_PROFILE_FLAG)