FreeRTOS/Demo/lwIP_AVR32_UC3/NETWORK/BasicSMTP/BasicSMTP.c - nest-detect/1.0.2/freertos - Git at Google

 /*This file has been prepared for Doxygen automatic documentation generation.*/
 /*! \file *********************************************************************
  *
  * \brief Basic SMTP Client for AVR32 UC3.
  *
  * - Compiler:           GNU GCC for AVR32
  * - Supported devices:  All AVR32 devices can be used.
  * - AppNote:
  *
  * \author               Atmel Corporation: http://www.atmel.com \n
  *                       Support and FAQ: http://support.atmel.no/
  *
  *****************************************************************************/

 /* Copyright (c) 2007, Atmel Corporation All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * 1. Redistributions of source code must retain the above copyright notice,
  * this list of conditions and the following disclaimer.
  *
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * 3. The name of ATMEL may not be used to endorse or promote products derived
  * from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
  * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 /*
   Implements a simplistic SMTP client. First time the task is started, connection is made and
   email is sent. Mail flag is then reset. Each time you press the Push Button 0, a new mail will be sent.
 */

 #if (SMTP_USED == 1)

 #include <string.h>

 // Scheduler includes.
 #include "FreeRTOS.h"
 #include "task.h"
 #include "BasicSMTP.h"


 // Demo includes.
 #include "portmacro.h"
 #include "partest.h"
 #include "intc.h"
 #include "gpio.h"

 // lwIP includes.
 #include "lwip/api.h"
 #include "lwip/tcpip.h"
 #include "lwip/memp.h"
 #include "lwip/stats.h"
 #include "lwip/opt.h"
 #include "lwip/api.h"
 #include "lwip/arch.h"
 #include "lwip/sys.h"
 #include "lwip/sockets.h"
 #include "netif/loopif.h"

 //! SMTP default port
 #define SMTP_PORT     25
 //! SMTP EHLO code answer
 #define SMTP_EHLO_STRING                  "220"
 //! SMTP end of transmission code answer
 #define SMTP_END_OF_TRANSMISSION_STRING   "221"
 //! SMTP OK code answer
 #define SMTP_OK_STRING                    "250"
 //! SMTP start of transmission code answer
 #define SMTP_START_OF_TRANSMISSION_STRING "354"
 //! SMTP DATA<CRLF>
 #define SMTP_DATA_STRING                  "DATA\r\n"
 //! SMTP <CRLF>.<CRLF>
 #define SMTP_MAIL_END_STRING              "\r\n.\r\n"
 //! SMTP QUIT<CRLFCRLF>
 #define SMTP_QUIT_STRING                  "QUIT\r\n"


 //! Server address
 #error configure SMTP server address
 char cServer[] = "192.168.0.1";

 //! Fill here the mailfrom with your mail address
 #error configure SMTP mail sender
 char cMailfrom[] = "MAIL FROM: <sender@domain.com>\r\n";

 //! Fill here the mailto with your contact mail address
 #error configure SMTP mail recipient
 char cMailto[] = "RCPT TO: <recipient@domain.com>\r\n";

 //! Fill here the mailcontent with the mail you want to send
 #error configure SMTP mail content
 char cMailcontent[] ="Subject: *** SPAM ***\r\nFROM: \"Your Name here\" <sender@domain.com>\r\nTO: \"Your Contact here\" <recipient@domain.com>\r\n\r\nSay what you want here.";

 //! flag to send mail
 Bool bSendMail = pdFALSE;

 //! buffer for SMTP response
 char cTempBuffer[200];


 //_____ D E C L A R A T I O N S ____________________________________________
 //! interrupt handler.
 #if __GNUC__
 __attribute__((naked))
 #elif __ICCAVR32__
 #pragma shadow_registers = full   // Naked.
 #endif
 void vpushb_ISR( void );

 //! soft interrupt handler. where treatment should be done
 #if __GNUC__
 __attribute__((__noinline__))
 #endif
 static portBASE_TYPE prvpushb_ISR_NonNakedBehaviour( void );


 //! Basic SMTP client task definition
 portTASK_FUNCTION( vBasicSMTPClient, pvParameters )
 {
   struct sockaddr_in stServeurSockAddr;
   long lRetval;
   long lSocket = -1;

   // configure push button 0 to produce IT on falling edge
   gpio_enable_pin_interrupt(GPIO_PUSH_BUTTON_0 , GPIO_FALLING_EDGE);
   // Disable all interrupts
   vPortEnterCritical();
   // register push button 0 handler on level 3
   INTC_register_interrupt( (__int_handler)&vpushb_ISR, AVR32_GPIO_IRQ_0 + (GPIO_PUSH_BUTTON_0/8), INT3);
   // Enable all interrupts
   vPortExitCritical();

   for (;;)
   {
     // wait for a signal to send a mail
     while (bSendMail != pdTRUE)   vTaskDelay(200);

     // Disable all interrupts
     vPortEnterCritical();
     // clear the flag
     bSendMail = pdFALSE;
     // Enable all interrupts
     vPortExitCritical();
     // clear the LED
     vParTestSetLED( 3 , pdFALSE );
     // Set up port
     memset(&stServeurSockAddr, 0, sizeof(stServeurSockAddr));
     stServeurSockAddr.sin_len = sizeof(stServeurSockAddr);
     stServeurSockAddr.sin_addr.s_addr = inet_addr(cServer);
     stServeurSockAddr.sin_port = htons(SMTP_PORT);
     stServeurSockAddr.sin_family = AF_INET;

     // socket as a stream
     if ( (lSocket = socket(AF_INET, SOCK_STREAM, 0)) < 0)
     {
       // socket failed, blink a LED and stay here
       for (;;) {
         vParTestToggleLED( 4 );
         vTaskDelay( 200 );
       }
     }
     // connect to the server
     if(connect(lSocket,(struct sockaddr *)&stServeurSockAddr, sizeof(stServeurSockAddr)) < 0)
     {
       // connect failed, blink a LED and stay here
       for (;;) {
         vParTestToggleLED( 6 );
         vTaskDelay( 200 );
       }
     }
     else
     {
 //Server: 220 SMTP Ready
       // wait for SMTP Server answer
       do
       {
         lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
       }while (lRetval <= 0);
       if (strncmp(cTempBuffer, SMTP_EHLO_STRING, sizeof(cTempBuffer)) >= 0)
       {
 //Client: EHLO smtp.domain.com
         // send ehlo
         send(lSocket, "HELO ", 5, 0);
         send(lSocket, cServer, strlen(cServer), 0);
         send(lSocket, "\r\n", 2, 0);
 //Server: 250
         // wait for SMTP Server answer
         do
         {
           lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
         }while (lRetval <= 0);
         if (strncmp(cTempBuffer, SMTP_OK_STRING, sizeof(cTempBuffer)) >= 0)
         {
 //Client: MAIL FROM:<sender@domain.com>
           // send MAIL FROM
           send(lSocket, cMailfrom, strlen(cMailfrom), 0);
 //Server: 250 OK
           // wait for SMTP Server answer
           do
           {
             lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
           }while (lRetval <= 0);
           if (strncmp(cTempBuffer, SMTP_OK_STRING, sizeof(cTempBuffer)) >= 0)
           {
 //Client: RCPT TO:<receiver@domain.com>
             // send RCPT TO
             send(lSocket, cMailto, strlen(cMailto), 0);
 //Server: 250 OK
             // wait for SMTP Server answer
             do
             {
               lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
             }while (lRetval <= 0);
             if (strncmp(cTempBuffer, SMTP_OK_STRING, sizeof(cTempBuffer)) >= 0)
             {
 //Client: DATA<CRLF>
               // send DATA
               send(lSocket, SMTP_DATA_STRING, 6, 0);
 //Server: 354 Start mail input; end with <CRLF>.<CRLF>
               // wait for SMTP Server answer
               do
               {
                 lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
               }while (lRetval <= 0);
               if (strncmp(cTempBuffer, SMTP_START_OF_TRANSMISSION_STRING, sizeof(cTempBuffer)) >= 0)
               {
                 // send content
                 send(lSocket, cMailcontent, strlen(cMailcontent), 0);
 //Client: <CRLF>.<CRLF>
                 // send "<CRLF>.<CRLF>"
                 send(lSocket, SMTP_MAIL_END_STRING, 5, 0);
 //Server: 250 OK
                 // wait for SMTP Server answer
                 do
                 {
                   lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
                 }while (lRetval <= 0);
                 if (strncmp(cTempBuffer, SMTP_OK_STRING, sizeof(cTempBuffer)) >= 0)
                 {
 //Client: QUIT<CRLFCRLF>
                   // send QUIT
                   send(lSocket, SMTP_QUIT_STRING, 8, 0);
 //Server: 221 smtp.domain.com closing transmission
                   do
                   {
                     lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
                   }while (lRetval <= 0);
                   if (strncmp(cTempBuffer, SMTP_END_OF_TRANSMISSION_STRING, sizeof(cTempBuffer)) >= 0)
                   {
                     vParTestSetLED( 3 , pdTRUE );
                   }
                 }
               }
             }
           }
         }
         // close socket
         close(lSocket);
       }
     }
   }
 }

 /*! \brief push button naked interrupt handler.
  *
  */
 #if __GNUC__
 __attribute__((naked))
 #elif __ICCAVR32__
 #pragma shadow_registers = full   // Naked.
 #endif
 void vpushb_ISR( void )
 {
  /* This ISR can cause a context switch, so the first statement must be a
      call to the portENTER_SWITCHING_ISR() macro.  This must be BEFORE any
      variable declarations. */
   portENTER_SWITCHING_ISR();

   prvpushb_ISR_NonNakedBehaviour();

   portEXIT_SWITCHING_ISR();
 }

 /*! \brief push button interrupt handler. Here, declarations should be done
  *
  */
 #if __GNUC__
 __attribute__((__noinline__))
 #elif __ICCAVR32__
 #pragma optimize = no_inline
 #endif
 static portBASE_TYPE prvpushb_ISR_NonNakedBehaviour( void )
 {
   if (gpio_get_pin_interrupt_flag(GPIO_PUSH_BUTTON_0))
   {
     // set the flag
     bSendMail = pdTRUE;
     // allow new interrupt : clear the IFR flag
     gpio_clear_pin_interrupt_flag(GPIO_PUSH_BUTTON_0);
   }
   // no context switch required, task is polling the flag
   return( pdFALSE );
 }


 #endif
	/This file has been prepared for Doxygen automatic documentation generation./
	/! \file ********************************************************************
	*
	* \brief Basic SMTP Client for AVR32 UC3.
	*
	* - Compiler: GNU GCC for AVR32
	* - Supported devices: All AVR32 devices can be used.
	* - AppNote:
	*
	* \author Atmel Corporation: http://www.atmel.com \n
	* Support and FAQ: http://support.atmel.no/
	*
	*****************************************************************************/

	/* Copyright (c) 2007, Atmel Corporation All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* 1. Redistributions of source code must retain the above copyright notice,
	* this list of conditions and the following disclaimer.
	*
	* 2. Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* 3. The name of ATMEL may not be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
	* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
	* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/*
	Implements a simplistic SMTP client. First time the task is started, connection is made and
	email is sent. Mail flag is then reset. Each time you press the Push Button 0, a new mail will be sent.
	*/

	#if (SMTP_USED == 1)

	#include <string.h>

	// Scheduler includes.
	#include "FreeRTOS.h"
	#include "task.h"
	#include "BasicSMTP.h"


	// Demo includes.
	#include "portmacro.h"
	#include "partest.h"
	#include "intc.h"
	#include "gpio.h"

	// lwIP includes.
	#include "lwip/api.h"
	#include "lwip/tcpip.h"
	#include "lwip/memp.h"
	#include "lwip/stats.h"
	#include "lwip/opt.h"
	#include "lwip/api.h"
	#include "lwip/arch.h"
	#include "lwip/sys.h"
	#include "lwip/sockets.h"
	#include "netif/loopif.h"

	//! SMTP default port
	#define SMTP_PORT 25
	//! SMTP EHLO code answer
	#define SMTP_EHLO_STRING "220"
	//! SMTP end of transmission code answer
	#define SMTP_END_OF_TRANSMISSION_STRING "221"
	//! SMTP OK code answer
	#define SMTP_OK_STRING "250"
	//! SMTP start of transmission code answer
	#define SMTP_START_OF_TRANSMISSION_STRING "354"
	//! SMTP DATA<CRLF>
	#define SMTP_DATA_STRING "DATA\r\n"
	//! SMTP <CRLF>.<CRLF>
	#define SMTP_MAIL_END_STRING "\r\n.\r\n"
	//! SMTP QUIT<CRLFCRLF>
	#define SMTP_QUIT_STRING "QUIT\r\n"


	//! Server address
	#error configure SMTP server address
	char cServer[] = "192.168.0.1";

	//! Fill here the mailfrom with your mail address
	#error configure SMTP mail sender
	char cMailfrom[] = "MAIL FROM: <sender@domain.com>\r\n";

	//! Fill here the mailto with your contact mail address
	#error configure SMTP mail recipient
	char cMailto[] = "RCPT TO: <recipient@domain.com>\r\n";

	//! Fill here the mailcontent with the mail you want to send
	#error configure SMTP mail content
	char cMailcontent[] ="Subject: * SPAM *\r\nFROM: \"Your Name here\" <sender@domain.com>\r\nTO: \"Your Contact here\" <recipient@domain.com>\r\n\r\nSay what you want here.";

	//! flag to send mail
	Bool bSendMail = pdFALSE;

	//! buffer for SMTP response
	char cTempBuffer[200];


	//_____ D E C L A R A T I O N S ____________________________________________
	//! interrupt handler.
	#if __GNUC__
	__attribute__((naked))
	#elif __ICCAVR32__
	#pragma shadow_registers = full // Naked.
	#endif
	void vpushb_ISR( void );

	//! soft interrupt handler. where treatment should be done
	#if __GNUC__
	__attribute__((__noinline__))
	#endif
	static portBASE_TYPE prvpushb_ISR_NonNakedBehaviour( void );



	//! Basic SMTP client task definition
	portTASK_FUNCTION( vBasicSMTPClient, pvParameters )
	{
	struct sockaddr_in stServeurSockAddr;
	long lRetval;
	long lSocket = -1;

	// configure push button 0 to produce IT on falling edge
	gpio_enable_pin_interrupt(GPIO_PUSH_BUTTON_0 , GPIO_FALLING_EDGE);
	// Disable all interrupts
	vPortEnterCritical();
	// register push button 0 handler on level 3
	INTC_register_interrupt( (__int_handler)&vpushb_ISR, AVR32_GPIO_IRQ_0 + (GPIO_PUSH_BUTTON_0/8), INT3);
	// Enable all interrupts
	vPortExitCritical();

	for (;;)
	{
	// wait for a signal to send a mail
	while (bSendMail != pdTRUE) vTaskDelay(200);

	// Disable all interrupts
	vPortEnterCritical();
	// clear the flag
	bSendMail = pdFALSE;
	// Enable all interrupts
	vPortExitCritical();
	// clear the LED
	vParTestSetLED( 3 , pdFALSE );
	// Set up port
	memset(&stServeurSockAddr, 0, sizeof(stServeurSockAddr));
	stServeurSockAddr.sin_len = sizeof(stServeurSockAddr);
	stServeurSockAddr.sin_addr.s_addr = inet_addr(cServer);
	stServeurSockAddr.sin_port = htons(SMTP_PORT);
	stServeurSockAddr.sin_family = AF_INET;

	// socket as a stream
	if ( (lSocket = socket(AF_INET, SOCK_STREAM, 0)) < 0)
	{
	// socket failed, blink a LED and stay here
	for (;;) {
	vParTestToggleLED( 4 );
	vTaskDelay( 200 );
	}
	}
	// connect to the server
	if(connect(lSocket,(struct sockaddr *)&stServeurSockAddr, sizeof(stServeurSockAddr)) < 0)
	{
	// connect failed, blink a LED and stay here
	for (;;) {
	vParTestToggleLED( 6 );
	vTaskDelay( 200 );
	}
	}
	else
	{
	//Server: 220 SMTP Ready
	// wait for SMTP Server answer
	do
	{
	lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
	}while (lRetval <= 0);
	if (strncmp(cTempBuffer, SMTP_EHLO_STRING, sizeof(cTempBuffer)) >= 0)
	{
	//Client: EHLO smtp.domain.com
	// send ehlo
	send(lSocket, "HELO ", 5, 0);
	send(lSocket, cServer, strlen(cServer), 0);
	send(lSocket, "\r\n", 2, 0);
	//Server: 250
	// wait for SMTP Server answer
	do
	{
	lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
	}while (lRetval <= 0);
	if (strncmp(cTempBuffer, SMTP_OK_STRING, sizeof(cTempBuffer)) >= 0)
	{
	//Client: MAIL FROM:<sender@domain.com>
	// send MAIL FROM
	send(lSocket, cMailfrom, strlen(cMailfrom), 0);
	//Server: 250 OK
	// wait for SMTP Server answer
	do
	{
	lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
	}while (lRetval <= 0);
	if (strncmp(cTempBuffer, SMTP_OK_STRING, sizeof(cTempBuffer)) >= 0)
	{
	//Client: RCPT TO:<receiver@domain.com>
	// send RCPT TO
	send(lSocket, cMailto, strlen(cMailto), 0);
	//Server: 250 OK
	// wait for SMTP Server answer
	do
	{
	lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
	}while (lRetval <= 0);
	if (strncmp(cTempBuffer, SMTP_OK_STRING, sizeof(cTempBuffer)) >= 0)
	{
	//Client: DATA<CRLF>
	// send DATA
	send(lSocket, SMTP_DATA_STRING, 6, 0);
	//Server: 354 Start mail input; end with <CRLF>.<CRLF>
	// wait for SMTP Server answer
	do
	{
	lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
	}while (lRetval <= 0);
	if (strncmp(cTempBuffer, SMTP_START_OF_TRANSMISSION_STRING, sizeof(cTempBuffer)) >= 0)
	{
	// send content
	send(lSocket, cMailcontent, strlen(cMailcontent), 0);
	//Client: <CRLF>.<CRLF>
	// send "<CRLF>.<CRLF>"
	send(lSocket, SMTP_MAIL_END_STRING, 5, 0);
	//Server: 250 OK
	// wait for SMTP Server answer
	do
	{
	lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
	}while (lRetval <= 0);
	if (strncmp(cTempBuffer, SMTP_OK_STRING, sizeof(cTempBuffer)) >= 0)
	{
	//Client: QUIT<CRLFCRLF>
	// send QUIT
	send(lSocket, SMTP_QUIT_STRING, 8, 0);
	//Server: 221 smtp.domain.com closing transmission
	do
	{
	lRetval = recv(lSocket, cTempBuffer, sizeof(cTempBuffer), 0);
	}while (lRetval <= 0);
	if (strncmp(cTempBuffer, SMTP_END_OF_TRANSMISSION_STRING, sizeof(cTempBuffer)) >= 0)
	{
	vParTestSetLED( 3 , pdTRUE );
	}
	}
	}
	}
	}
	}
	// close socket
	close(lSocket);
	}
	}
	}
	}

	/*! \brief push button naked interrupt handler.
	*
	*/
	#if __GNUC__
	__attribute__((naked))
	#elif __ICCAVR32__
	#pragma shadow_registers = full // Naked.
	#endif
	void vpushb_ISR( void )
	{
	/* This ISR can cause a context switch, so the first statement must be a
	call to the portENTER_SWITCHING_ISR() macro. This must be BEFORE any
	variable declarations. */
	portENTER_SWITCHING_ISR();

	prvpushb_ISR_NonNakedBehaviour();

	portEXIT_SWITCHING_ISR();
	}

	/*! \brief push button interrupt handler. Here, declarations should be done
	*
	*/
	#if __GNUC__
	__attribute__((__noinline__))
	#elif __ICCAVR32__
	#pragma optimize = no_inline
	#endif
	static portBASE_TYPE prvpushb_ISR_NonNakedBehaviour( void )
	{
	if (gpio_get_pin_interrupt_flag(GPIO_PUSH_BUTTON_0))
	{
	// set the flag
	bSendMail = pdTRUE;
	// allow new interrupt : clear the IFR flag
	gpio_clear_pin_interrupt_flag(GPIO_PUSH_BUTTON_0);
	}
	// no context switch required, task is polling the flag
	return( pdFALSE );
	}





	#endif