/**********************************************************************
* $Id$		lpc18xx_timer.h		2011-06-02
*//**
* @file		lpc18xx_timer.h
* @brief	Contains all functions support for Timer firmware library
* 			on LPC18xx
* @version	1.0
* @date		02. June. 2011
* @author	NXP MCU SW Application Team
*
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**********************************************************************/

/* Peripheral group ----------------------------------------------------------- */
/** @defgroup TIMER TIMER
 * @ingroup LPC1800CMSIS_FwLib_Drivers
 * @{
 */

#ifndef __LPC18XX_TIMER_H_
#define __LPC18XX_TIMER_H_

/* Includes ------------------------------------------------------------------- */
#include "LPC18xx.h"
#include "lpc_types.h"

#ifdef __cplusplus
extern "C"
{
#endif

/* Private Macros ------------------------------------------------------------- */
/** @defgroup TIMER_Private_Macros TIMER Private Macros
 * @{
 */

/* --------------------- BIT DEFINITIONS -------------------------------------- */
/**********************************************************************
** Interrupt information
**********************************************************************/
/** Macro to clean interrupt pending */
#define TIM_IR_CLR(n) _BIT(n)

/**********************************************************************
** Timer interrupt register definitions
**********************************************************************/
/** Macro for getting a timer match interrupt bit */
#define TIM_MATCH_INT(n)		(_BIT(n & 0x0F))
/** Macro for getting a capture event interrupt bit */
#define TIM_CAP_INT(n)     (_BIT(((n & 0x0F) + 4)))

/**********************************************************************
* Timer control register definitions
**********************************************************************/
/** Timer/counter enable bit */
#define TIM_ENABLE			((uint32_t)(1<<0))
/** Timer/counter reset bit */
#define TIM_RESET			((uint32_t)(1<<1))
/** Timer control bit mask */
#define TIM_TCR_MASKBIT		((uint32_t)(3))

/**********************************************************************
* Timer match control register definitions
**********************************************************************/
/** Bit location for interrupt on MRx match, n = 0 to 3 */
#define TIM_INT_ON_MATCH(n)      	(_BIT((n * 3)))
/** Bit location for reset on MRx match, n = 0 to 3 */
#define TIM_RESET_ON_MATCH(n)    	(_BIT(((n * 3) + 1)))
/** Bit location for stop on MRx match, n = 0 to 3 */
#define TIM_STOP_ON_MATCH(n)     	(_BIT(((n * 3) + 2)))
/** Timer Match control bit mask */
#define TIM_MCR_MASKBIT			   ((uint32_t)(0x0FFF))
/** Timer Match control bit mask for specific channel*/
#define	TIM_MCR_CHANNEL_MASKBIT(n)		((uint32_t)(7<<(n*3)))

/**********************************************************************
* Timer capture control register definitions
**********************************************************************/
/** Bit location for CAP.n on CRx rising edge, n = 0 to 3 */
#define TIM_CAP_RISING(n)   	(_BIT((n * 3)))
/** Bit location for CAP.n on CRx falling edge, n = 0 to 3 */
#define TIM_CAP_FALLING(n)   	(_BIT(((n * 3) + 1)))
/** Bit location for CAP.n on CRx interrupt enable, n = 0 to 3 */
#define TIM_INT_ON_CAP(n)    	(_BIT(((n * 3) + 2)))
/** Mask bit for rising and falling edge bit */
#define TIM_EDGE_MASK(n)		(_SBF((n * 3), 0x03))
/** Timer capture control bit mask */
#define TIM_CCR_MASKBIT			((uint32_t)(0x3F))
/** Timer Capture control bit mask for specific channel*/
#define	TIM_CCR_CHANNEL_MASKBIT(n)		((uint32_t)(7<<(n*3)))

/**********************************************************************
* Timer external match register definitions
**********************************************************************/
/** Bit location for output state change of MAT.n when external match
   happens, n = 0 to 3 */
#define TIM_EM(n)    			_BIT(n)
/** Output state change of MAT.n when external match happens: no change */
#define TIM_EM_NOTHING    	((uint8_t)(0x0))
/** Output state change of MAT.n when external match happens: low */
#define TIM_EM_LOW         	((uint8_t)(0x1))
/** Output state change of MAT.n when external match happens: high */
#define TIM_EM_HIGH        	((uint8_t)(0x2))
/** Output state change of MAT.n when external match happens: toggle */
#define TIM_EM_TOGGLE      	((uint8_t)(0x3))
/** Macro for setting for the MAT.n change state bits */
#define TIM_EM_SET(n,s) 	(_SBF(((n << 1) + 4), (s & 0x03)))
/** Mask for the MAT.n change state bits */
#define TIM_EM_MASK(n) 		(_SBF(((n << 1) + 4), 0x03))
/** Timer external match bit mask */
#define TIM_EMR_MASKBIT	0x0FFF

/**********************************************************************
* Timer Count Control Register definitions
**********************************************************************/
/** Mask to get the Counter/timer mode bits */
#define TIM_CTCR_MODE_MASK  0x3
/** Mask to get the count input select bits */
#define TIM_CTCR_INPUT_MASK 0xC
/** Timer Count control bit mask */
#define TIM_CTCR_MASKBIT	0xF
#define TIM_COUNTER_MODE ((uint8_t)(1))


/* ---------------- CHECK PARAMETER DEFINITIONS ---------------------------- */
/** Macro to determine if it is valid TIMER peripheral */
#define PARAM_TIMx(n)	((((uint32_t *)n)==((uint32_t *)LPC_TIMER0)) || (((uint32_t *)n)==((uint32_t *)LPC_TIMER1)) \
|| (((uint32_t *)n)==((uint32_t *)LPC_TIMER2)) || (((uint32_t *)n)==((uint32_t *)LPC_TIMER3)))

/* Macro check interrupt type */
#define PARAM_TIM_INT_TYPE(TYPE)	((TYPE ==TIM_MR0_INT)||(TYPE ==TIM_MR1_INT)\
||(TYPE ==TIM_MR2_INT)||(TYPE ==TIM_MR3_INT)\
||(TYPE ==TIM_CR0_INT)||(TYPE ==TIM_CR1_INT)\
||(TYPE ==TIM_CR2_INT)||(TYPE ==TIM_CR3_INT))

/* Macro check TIMER mode */
#define PARAM_TIM_MODE_OPT(MODE)	((MODE == TIM_TIMER_MODE)||(MODE == TIM_COUNTER_RISING_MODE)\
|| (MODE == TIM_COUNTER_RISING_MODE)||(MODE == TIM_COUNTER_RISING_MODE))

/* Macro check TIMER prescale value */
#define PARAM_TIM_PRESCALE_OPT(OPT)	((OPT == TIM_PRESCALE_TICKVAL)||(OPT == TIM_PRESCALE_USVAL))

/* Macro check TIMER counter intput mode */
#define PARAM_TIM_COUNTER_INPUT_OPT(OPT)	((OPT == TIM_COUNTER_INCAP0)||(OPT == TIM_COUNTER_INCAP1)\
											||(OPT == TIM_COUNTER_INCAP2)||(OPT == TIM_COUNTER_INCAP3))

/* Macro check TIMER external match mode */
#define PARAM_TIM_EXTMATCH_OPT(OPT)	((OPT == TIM_EXTMATCH_NOTHING)||(OPT == TIM_EXTMATCH_LOW)\
||(OPT == TIM_EXTMATCH_HIGH)||(OPT == TIM_EXTMATCH_TOGGLE))

/* Macro check TIMER external match mode */
#define PARAM_TIM_CAP_MODE_OPT(OPT)	((OPT == TIM_CAPTURE_NONE)||(OPT == TIM_CAPTURE_RISING) \
||(OPT == TIM_CAPTURE_FALLING)||(OPT == TIM_CAPTURE_ANY))

/**
 * @}
 */


/* Public Types --------------------------------------------------------------- */
/** @defgroup TIMER_Public_Types TIMER Public Types
 * @{
 */

/***********************************************************************
 * @brief Timer device enumeration
**********************************************************************/
/** @brief interrupt type */
typedef enum
{
	TIM_MR0_INT =0, /*!< interrupt for Match channel 0*/
	TIM_MR1_INT =1, /*!< interrupt for Match channel 1*/
	TIM_MR2_INT =2, /*!< interrupt for Match channel 2*/
	TIM_MR3_INT =3, /*!< interrupt for Match channel 3*/
	TIM_CR0_INT =4, /*!< interrupt for Capture channel 0*/
	TIM_CR1_INT =5, /*!< interrupt for Capture channel 1*/
	TIM_CR2_INT =6, /*!< interrupt for Capture channel 1*/
	TIM_CR3_INT =7 /*!< interrupt for Capture channel 1*/
}TIM_INT_TYPE;

/** @brief Timer/counter operating mode */
typedef enum
{
	TIM_TIMER_MODE = 0,				/*!< Timer mode */
	TIM_COUNTER_RISING_MODE,		/*!< Counter rising mode */
	TIM_COUNTER_FALLING_MODE,		/*!< Counter falling mode */
	TIM_COUNTER_ANY_MODE			/*!< Counter on both edges */
} TIM_MODE_OPT;

/** @brief Timer/Counter prescale option */
typedef enum
{
	TIM_PRESCALE_TICKVAL = 0,		/*!< Prescale in absolute value */
	TIM_PRESCALE_USVAL				/*!< Prescale in microsecond value */
} TIM_PRESCALE_OPT;

/** @brief Counter input option */
typedef enum
{
	TIM_COUNTER_INCAP0 = 0,			/*!< CAPn.0 input pin for TIMERn */
	TIM_COUNTER_INCAP1,				/*!< CAPn.1 input pin for TIMERn */
	TIM_COUNTER_INCAP2,				/*!< CAPn.2 input pin for TIMERn */
	TIM_COUNTER_INCAP3				/*!< CAPn.3 input pin for TIMERn */
} TIM_COUNTER_INPUT_OPT;

/** @brief Timer/Counter external match option */
typedef enum
{
	TIM_EXTMATCH_NOTHING = 0,		/*!< Do nothing for external output pin if match */
	TIM_EXTMATCH_LOW,				/*!< Force external output pin to low if match */
	TIM_EXTMATCH_HIGH,				/*!< Force external output pin to high if match */
	TIM_EXTMATCH_TOGGLE				/*!< Toggle external output pin if match */
}TIM_EXTMATCH_OPT;

/** @brief Timer/counter capture mode options */
typedef enum {
	TIM_CAPTURE_NONE = 0,	/*!< No Capture */
	TIM_CAPTURE_RISING,		/*!< Rising capture mode */
	TIM_CAPTURE_FALLING,	/*!< Falling capture mode */
	TIM_CAPTURE_ANY			/*!< On both edges */
} TIM_CAP_MODE_OPT;

/***********************************************************************
 * @brief Timer structure definitions
**********************************************************************/
/** @brief Configuration structure in TIMER mode */
typedef struct
{

	uint8_t PrescaleOption;		/**< Timer Prescale option, should be:
									- TIM_PRESCALE_TICKVAL: Prescale in absolute value
									- TIM_PRESCALE_USVAL: Prescale in microsecond value
									*/
	uint8_t Reserved[3];		/**< Reserved */
	uint32_t PrescaleValue;		/**< Prescale value */
} TIM_TIMERCFG_Type;

/** @brief Configuration structure in COUNTER mode */
typedef struct {

	uint8_t CounterOption;		/**< Counter Option, should be:
									- TIM_COUNTER_INCAP0: CAPn.0 input pin for TIMERn
									- TIM_COUNTER_INCAP1: CAPn.1 input pin for TIMERn
								*/
	uint8_t CountInputSelect;
	uint8_t Reserved[2];
} TIM_COUNTERCFG_Type;

/** @brief Match channel configuration structure */
typedef struct {
	uint8_t MatchChannel;	/**< Match channel, should be in range
							from 0..3 */
	uint8_t IntOnMatch;		/**< Interrupt On match, should be:
								- ENABLE: Enable this function.
								- DISABLE: Disable this function.
							*/
	uint8_t StopOnMatch;	/**< Stop On match, should be:
								- ENABLE: Enable this function.
								- DISABLE: Disable this function.
							*/
	uint8_t ResetOnMatch;	/**< Reset On match, should be:
								- ENABLE: Enable this function.
								- DISABLE: Disable this function.
							*/

	uint8_t ExtMatchOutputType;	/**< External Match Output type, should be:
							 	-	 TIM_EXTMATCH_NOTHING:	Do nothing for external output pin if match
							 	-   TIM_EXTMATCH_LOW:	Force external output pin to low if match
							 	- 	 TIM_EXTMATCH_HIGH: Force external output pin to high if match
							 	-   TIM_EXTMATCH_TOGGLE: Toggle external output pin if match.
							*/
	uint8_t Reserved[3];	/** Reserved */
	uint32_t MatchValue;	/** Match value */
} TIM_MATCHCFG_Type;

/** @brief Capture Input configuration structure */
typedef struct {
	uint8_t CaptureChannel;	/**< Capture channel, should be in range
							from 0..1 */
	uint8_t RisingEdge;		/**< caption rising edge, should be:
								- ENABLE: Enable rising edge.
								- DISABLE: Disable this function.
							*/
	uint8_t FallingEdge;	/**< caption falling edge, should be:
								- ENABLE: Enable falling edge.
								- DISABLE: Disable this function.
								*/
	uint8_t IntOnCaption;	/**< Interrupt On caption, should be:
								- ENABLE: Enable interrupt function.
								- DISABLE: Disable this function.
							*/

} TIM_CAPTURECFG_Type;

/**
 * @}
 */


/* Public Functions ----------------------------------------------------------- */
/** @defgroup TIMER_Public_Functions TIMER Public Functions
 * @{
 */
/* Init/DeInit TIM functions -----------*/
void TIM_Init(LPC_TIMERn_Type *TIMx, TIM_MODE_OPT TimerCounterMode, void *TIM_ConfigStruct);
void TIM_DeInit(LPC_TIMERn_Type *TIMx);

/* TIM interrupt functions -------------*/
void TIM_ClearIntPending(LPC_TIMERn_Type *TIMx, TIM_INT_TYPE IntFlag);
void TIM_ClearIntCapturePending(LPC_TIMERn_Type *TIMx, TIM_INT_TYPE IntFlag);
FlagStatus TIM_GetIntStatus(LPC_TIMERn_Type *TIMx, TIM_INT_TYPE IntFlag);
FlagStatus TIM_GetIntCaptureStatus(LPC_TIMERn_Type *TIMx, TIM_INT_TYPE IntFlag);

/* TIM configuration functions --------*/
void TIM_ConfigStructInit(TIM_MODE_OPT TimerCounterMode, void *TIM_ConfigStruct);
void TIM_ConfigMatch(LPC_TIMERn_Type *TIMx, TIM_MATCHCFG_Type *TIM_MatchConfigStruct);
void TIM_UpdateMatchValue(LPC_TIMERn_Type *TIMx,uint8_t MatchChannel, uint32_t MatchValue);
void TIM_SetMatchExt(LPC_TIMERn_Type *TIMx,TIM_EXTMATCH_OPT ext_match );
void TIM_ConfigCapture(LPC_TIMERn_Type *TIMx, TIM_CAPTURECFG_Type *TIM_CaptureConfigStruct);
void TIM_Cmd(LPC_TIMERn_Type *TIMx, FunctionalState NewState);

uint32_t TIM_GetCaptureValue(LPC_TIMERn_Type *TIMx, TIM_COUNTER_INPUT_OPT CaptureChannel);
void TIM_ResetCounter(LPC_TIMERn_Type *TIMx);
void TIM_Waitus(uint32_t time);
void TIM_Waitms(uint32_t time);
/**
 * @}
 */
#ifdef __cplusplus
}
#endif

#endif /* __LPC18XX_TIMER_H_ */

/**
 * @}
 */

/* --------------------------------- End Of File ------------------------------ */