| //***************************************************************************** | |
| // | |
| // hw_ints.h - Macros that define the interrupt assignment on Stellaris. | |
| // | |
| // Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved. | |
| // | |
| // Software License Agreement | |
| // | |
| // Luminary Micro, Inc. (LMI) is supplying this software for use solely and | |
| // exclusively on LMI's Stellaris Family of microcontroller products. | |
| // | |
| // The software is owned by LMI and/or its suppliers, and is protected under | |
| // applicable copyright laws. All rights are reserved. Any use in violation | |
| // of the foregoing restrictions may subject the user to criminal sanctions | |
| // under applicable laws, as well as to civil liability for the breach of the | |
| // terms and conditions of this license. | |
| // | |
| // THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED | |
| // OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF | |
| // MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. | |
| // LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR | |
| // CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. | |
| // | |
| // This is part of revision 991 of the Stellaris Driver Library. | |
| // | |
| //***************************************************************************** | |
| #ifndef __HW_INTS_H__ | |
| #define __HW_INTS_H__ | |
| //***************************************************************************** | |
| // | |
| // The following define the fault assignments. | |
| // | |
| //***************************************************************************** | |
| #define FAULT_NMI 2 // NMI fault | |
| #define FAULT_HARD 3 // Hard fault | |
| #define FAULT_MPU 4 // MPU fault | |
| #define FAULT_BUS 5 // Bus fault | |
| #define FAULT_USAGE 6 // Usage fault | |
| #define FAULT_SVCALL 11 // SVCall | |
| #define FAULT_DEBUG 12 // Debug monitor | |
| #define FAULT_PENDSV 14 // PendSV | |
| #define FAULT_SYSTICK 15 // System Tick | |
| //***************************************************************************** | |
| // | |
| // The following define the interrupt assignments. | |
| // | |
| //***************************************************************************** | |
| #define INT_GPIOA 16 // GPIO Port A | |
| #define INT_GPIOB 17 // GPIO Port B | |
| #define INT_GPIOC 18 // GPIO Port C | |
| #define INT_GPIOD 19 // GPIO Port D | |
| #define INT_GPIOE 20 // GPIO Port E | |
| #define INT_UART0 21 // UART0 Rx and Tx | |
| #define INT_UART1 22 // UART1 Rx and Tx | |
| #define INT_SSI 23 // SSI Rx and Tx | |
| #define INT_I2C 24 // I2C Master and Slave | |
| #define INT_PWM_FAULT 25 // PWM Fault | |
| #define INT_PWM0 26 // PWM Generator 0 | |
| #define INT_PWM1 27 // PWM Generator 1 | |
| #define INT_PWM2 28 // PWM Generator 2 | |
| #define INT_QEI 29 // Quadrature Encoder | |
| #define INT_ADC0 30 // ADC Sequence 0 | |
| #define INT_ADC1 31 // ADC Sequence 1 | |
| #define INT_ADC2 32 // ADC Sequence 2 | |
| #define INT_ADC3 33 // ADC Sequence 3 | |
| #define INT_WATCHDOG 34 // Watchdog timer | |
| #define INT_TIMER0A 35 // Timer 0 subtimer A | |
| #define INT_TIMER0B 36 // Timer 0 subtimer B | |
| #define INT_TIMER1A 37 // Timer 1 subtimer A | |
| #define INT_TIMER1B 38 // Timer 1 subtimer B | |
| #define INT_TIMER2A 39 // Timer 2 subtimer A | |
| #define INT_TIMER2B 40 // Timer 2 subtimer B | |
| #define INT_COMP0 41 // Analog Comparator 0 | |
| #define INT_COMP1 42 // Analog Comparator 1 | |
| #define INT_COMP2 43 // Analog Comparator 2 | |
| #define INT_SYSCTL 44 // System Control (PLL, OSC, BO) | |
| #define INT_FLASH 45 // FLASH Control | |
| //***************************************************************************** | |
| // | |
| // The total number of interrupts. | |
| // | |
| //***************************************************************************** | |
| #define NUM_INTERRUPTS 46 | |
| //***************************************************************************** | |
| // | |
| // The total number of priority levels. | |
| // | |
| //***************************************************************************** | |
| #define NUM_PRIORITY 8 | |
| #define NUM_PRIORITY_BITS 3 | |
| #endif // __HW_INTS_H__ |