/* | |
* Copyright (c) Nordic Semiconductor ASA | |
* All rights reserved. | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, this | |
* list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form must reproduce the above copyright notice, this | |
* list of conditions and the following disclaimer in the documentation and/or | |
* other materials provided with the distribution. | |
* | |
* 3. Neither the name of Nordic Semiconductor ASA nor the names of other | |
* contributors to this software may be used to endorse or promote products | |
* derived from this software without specific prior written permission. | |
* | |
* 4. This software must only be used in a processor manufactured by Nordic | |
* Semiconductor ASA, or in a processor manufactured by a third party that | |
* is used in combination with a processor manufactured by Nordic Semiconductor. | |
* | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND | |
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR | |
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
*/ | |
/** | |
@addtogroup BLE_GATT Generic Attribute Profile (GATT) Common | |
@{ | |
@brief Common definitions and prototypes for the GATT interfaces. | |
*/ | |
#ifndef BLE_GATT_H__ | |
#define BLE_GATT_H__ | |
#include "ble_types.h" | |
#include "ble_ranges.h" | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/** @addtogroup BLE_GATT_DEFINES Defines | |
* @{ */ | |
/** @brief Default ATT MTU, in bytes. */ | |
#define BLE_GATT_ATT_MTU_DEFAULT 23 | |
/**@brief Invalid Attribute Handle. */ | |
#define BLE_GATT_HANDLE_INVALID 0x0000 | |
/**@brief First Attribute Handle. */ | |
#define BLE_GATT_HANDLE_START 0x0001 | |
/**@brief Last Attribute Handle. */ | |
#define BLE_GATT_HANDLE_END 0xFFFF | |
/** @defgroup BLE_GATT_TIMEOUT_SOURCES GATT Timeout sources | |
* @{ */ | |
#define BLE_GATT_TIMEOUT_SRC_PROTOCOL 0x00 /**< ATT Protocol timeout. */ | |
/** @} */ | |
/** @defgroup BLE_GATT_WRITE_OPS GATT Write operations | |
* @{ */ | |
#define BLE_GATT_OP_INVALID 0x00 /**< Invalid Operation. */ | |
#define BLE_GATT_OP_WRITE_REQ 0x01 /**< Write Request. */ | |
#define BLE_GATT_OP_WRITE_CMD 0x02 /**< Write Command. */ | |
#define BLE_GATT_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */ | |
#define BLE_GATT_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */ | |
#define BLE_GATT_OP_EXEC_WRITE_REQ 0x05 /**< Execute Write Request. */ | |
/** @} */ | |
/** @defgroup BLE_GATT_EXEC_WRITE_FLAGS GATT Execute Write flags | |
* @{ */ | |
#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_CANCEL 0x00 /**< Cancel prepared write. */ | |
#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE 0x01 /**< Execute prepared write. */ | |
/** @} */ | |
/** @defgroup BLE_GATT_HVX_TYPES GATT Handle Value operations | |
* @{ */ | |
#define BLE_GATT_HVX_INVALID 0x00 /**< Invalid Operation. */ | |
#define BLE_GATT_HVX_NOTIFICATION 0x01 /**< Handle Value Notification. */ | |
#define BLE_GATT_HVX_INDICATION 0x02 /**< Handle Value Indication. */ | |
/** @} */ | |
/** @defgroup BLE_GATT_STATUS_CODES GATT Status Codes | |
* @{ */ | |
#define BLE_GATT_STATUS_SUCCESS 0x0000 /**< Success. */ | |
#define BLE_GATT_STATUS_UNKNOWN 0x0001 /**< Unknown or not applicable status. */ | |
#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 /**< ATT Error: Invalid Error Code. */ | |
#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 /**< ATT Error: Invalid Attribute Handle. */ | |
#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 /**< ATT Error: Read not permitted. */ | |
#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 /**< ATT Error: Write not permitted. */ | |
#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 /**< ATT Error: Used in ATT as Invalid PDU. */ | |
#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 /**< ATT Error: Authenticated link required. */ | |
#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 /**< ATT Error: Used in ATT as Request Not Supported. */ | |
#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 /**< ATT Error: Offset specified was past the end of the attribute. */ | |
#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 /**< ATT Error: Used in ATT as Insufficient Authorization. */ | |
#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 /**< ATT Error: Used in ATT as Prepare Queue Full. */ | |
#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A /**< ATT Error: Used in ATT as Attribute not found. */ | |
#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */ | |
#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C /**< ATT Error: Encryption key size used is insufficient. */ | |
#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D /**< ATT Error: Invalid value size. */ | |
#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E /**< ATT Error: Very unlikely error. */ | |
#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F /**< ATT Error: Encrypted link required. */ | |
#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 /**< ATT Error: Attribute type is not a supported grouping attribute. */ | |
#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 /**< ATT Error: Encrypted link required. */ | |
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 /**< ATT Error: Reserved for Future Use range #1 begin. */ | |
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F /**< ATT Error: Reserved for Future Use range #1 end. */ | |
#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 /**< ATT Error: Application range begin. */ | |
#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F /**< ATT Error: Application range end. */ | |
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 /**< ATT Error: Reserved for Future Use range #2 begin. */ | |
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF /**< ATT Error: Reserved for Future Use range #2 end. */ | |
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 /**< ATT Error: Reserved for Future Use range #3 begin. */ | |
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC /**< ATT Error: Reserved for Future Use range #3 end. */ | |
#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD /**< ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured. */ | |
#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE /**< ATT Common Profile and Service Error: Procedure Already in Progress. */ | |
#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF /**< ATT Common Profile and Service Error: Out Of Range. */ | |
/** @} */ | |
/** @defgroup BLE_GATT_CPF_FORMATS Characteristic Presentation Formats | |
* @note Found at http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml | |
* @{ */ | |
#define BLE_GATT_CPF_FORMAT_RFU 0x00 /**< Reserved For Future Use. */ | |
#define BLE_GATT_CPF_FORMAT_BOOLEAN 0x01 /**< Boolean. */ | |
#define BLE_GATT_CPF_FORMAT_2BIT 0x02 /**< Unsigned 2-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_NIBBLE 0x03 /**< Unsigned 4-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_UINT8 0x04 /**< Unsigned 8-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_UINT12 0x05 /**< Unsigned 12-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_UINT16 0x06 /**< Unsigned 16-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_UINT24 0x07 /**< Unsigned 24-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_UINT32 0x08 /**< Unsigned 32-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_UINT48 0x09 /**< Unsigned 48-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_UINT64 0x0A /**< Unsigned 64-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_UINT128 0x0B /**< Unsigned 128-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_SINT8 0x0C /**< Signed 2-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_SINT12 0x0D /**< Signed 12-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_SINT16 0x0E /**< Signed 16-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_SINT24 0x0F /**< Signed 24-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_SINT32 0x10 /**< Signed 32-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_SINT48 0x11 /**< Signed 48-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_SINT64 0x12 /**< Signed 64-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_SINT128 0x13 /**< Signed 128-bit integer. */ | |
#define BLE_GATT_CPF_FORMAT_FLOAT32 0x14 /**< IEEE-754 32-bit floating point. */ | |
#define BLE_GATT_CPF_FORMAT_FLOAT64 0x15 /**< IEEE-754 64-bit floating point. */ | |
#define BLE_GATT_CPF_FORMAT_SFLOAT 0x16 /**< IEEE-11073 16-bit SFLOAT. */ | |
#define BLE_GATT_CPF_FORMAT_FLOAT 0x17 /**< IEEE-11073 32-bit FLOAT. */ | |
#define BLE_GATT_CPF_FORMAT_DUINT16 0x18 /**< IEEE-20601 format. */ | |
#define BLE_GATT_CPF_FORMAT_UTF8S 0x19 /**< UTF-8 string. */ | |
#define BLE_GATT_CPF_FORMAT_UTF16S 0x1A /**< UTF-16 string. */ | |
#define BLE_GATT_CPF_FORMAT_STRUCT 0x1B /**< Opaque Structure. */ | |
/** @} */ | |
/** @defgroup BLE_GATT_CPF_NAMESPACES GATT Bluetooth Namespaces | |
* @{ | |
*/ | |
#define BLE_GATT_CPF_NAMESPACE_BTSIG 0x01 /**< Bluetooth SIG defined Namespace. */ | |
#define BLE_GATT_CPF_NAMESPACE_DESCRIPTION_UNKNOWN 0x0000 /**< Namespace Description Unknown. */ | |
/** @} */ | |
/** @} */ | |
/** @addtogroup BLE_GATT_STRUCTURES Structures | |
* @{ */ | |
/** | |
* @brief BLE GATT connection configuration parameters, set with @ref sd_ble_cfg_set. | |
* | |
* @retval NRF_ERROR_INVALID_PARAM att_mtu is smaller than @ref BLE_GATT_ATT_MTU_DEFAULT. | |
*/ | |
typedef struct | |
{ | |
uint16_t att_mtu; /**< Maximum size of ATT packet the SoftDevice can send or receive. | |
The default and minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT. | |
@mscs | |
@mmsc{@ref BLE_GATTC_MTU_EXCHANGE} | |
@mmsc{@ref BLE_GATTS_MTU_EXCHANGE} | |
@endmscs | |
*/ | |
} ble_gatt_conn_cfg_t; | |
/**@brief GATT Characteristic Properties. */ | |
typedef struct | |
{ | |
/* Standard properties */ | |
uint8_t broadcast :1; /**< Broadcasting of the value permitted. */ | |
uint8_t read :1; /**< Reading the value permitted. */ | |
uint8_t write_wo_resp :1; /**< Writing the value with Write Command permitted. */ | |
uint8_t write :1; /**< Writing the value with Write Request permitted. */ | |
uint8_t notify :1; /**< Notification of the value permitted. */ | |
uint8_t indicate :1; /**< Indications of the value permitted. */ | |
uint8_t auth_signed_wr :1; /**< Writing the value with Signed Write Command permitted. */ | |
} ble_gatt_char_props_t; | |
/**@brief GATT Characteristic Extended Properties. */ | |
typedef struct | |
{ | |
/* Extended properties */ | |
uint8_t reliable_wr :1; /**< Writing the value with Queued Write operations permitted. */ | |
uint8_t wr_aux :1; /**< Writing the Characteristic User Description descriptor permitted. */ | |
} ble_gatt_char_ext_props_t; | |
/** @} */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif // BLE_GATT_H__ | |
/** @} */ |