/* | |
* Copyright (c) Nordic Semiconductor ASA | |
* All rights reserved. | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, this | |
* list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form must reproduce the above copyright notice, this | |
* list of conditions and the following disclaimer in the documentation and/or | |
* other materials provided with the distribution. | |
* | |
* 3. Neither the name of Nordic Semiconductor ASA nor the names of other | |
* contributors to this software may be used to endorse or promote products | |
* derived from this software without specific prior written permission. | |
* | |
* 4. This software must only be used in a processor manufactured by Nordic | |
* Semiconductor ASA, or in a processor manufactured by a third party that | |
* is used in combination with a processor manufactured by Nordic Semiconductor. | |
* | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND | |
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR | |
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
*/ | |
/** | |
@addtogroup BLE_COMMON | |
@{ | |
*/ | |
#ifndef BLE_HCI_H__ | |
#define BLE_HCI_H__ | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes | |
* @{ */ | |
#define BLE_HCI_STATUS_CODE_SUCCESS 0x00 /**< Success. */ | |
#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01 /**< Unknown BLE Command. */ | |
#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02 /**< Unknown Connection Identifier. */ | |
/*0x03 Hardware Failure | |
0x04 Page Timeout | |
*/ | |
#define BLE_HCI_AUTHENTICATION_FAILURE 0x05 /**< Authentication Failure. */ | |
#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06 /**< Pin or Key missing. */ | |
#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07 /**< Memory Capacity Exceeded. */ | |
#define BLE_HCI_CONNECTION_TIMEOUT 0x08 /**< Connection Timeout. */ | |
/*0x09 Connection Limit Exceeded | |
0x0A Synchronous Connection Limit To A Device Exceeded | |
0x0B ACL Connection Already Exists*/ | |
#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C /**< Command Disallowed. */ | |
/*0x0D Connection Rejected due to Limited Resources | |
0x0E Connection Rejected Due To Security Reasons | |
0x0F Connection Rejected due to Unacceptable BD_ADDR | |
0x10 Connection Accept Timeout Exceeded | |
0x11 Unsupported Feature or Parameter Value*/ | |
#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12 /**< Invalid BLE Command Parameters. */ | |
#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13 /**< Remote User Terminated Connection. */ | |
#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14 /**< Remote Device Terminated Connection due to low resources.*/ | |
#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15 /**< Remote Device Terminated Connection due to power off. */ | |
#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16 /**< Local Host Terminated Connection. */ | |
/* | |
0x17 Repeated Attempts | |
0x18 Pairing Not Allowed | |
0x19 Unknown LMP PDU | |
*/ | |
#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A /**< Unsupported Remote Feature. */ | |
/* | |
0x1B SCO Offset Rejected | |
0x1C SCO Interval Rejected | |
0x1D SCO Air Mode Rejected*/ | |
#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E /**< Invalid LMP Parameters. */ | |
#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F /**< Unspecified Error. */ | |
/*0x20 Unsupported LMP Parameter Value | |
0x21 Role Change Not Allowed | |
*/ | |
#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22 /**< LMP Response Timeout. */ | |
#define BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION 0x23 /**< LMP Error Transaction Collision/LL Procedure Collision. */ | |
#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24 /**< LMP PDU Not Allowed. */ | |
/*0x25 Encryption Mode Not Acceptable | |
0x26 Link Key Can Not be Changed | |
0x27 Requested QoS Not Supported | |
*/ | |
#define BLE_HCI_INSTANT_PASSED 0x28 /**< Instant Passed. */ | |
#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29 /**< Pairing with Unit Key Unsupported. */ | |
#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A /**< Different Transaction Collision. */ | |
/* | |
0x2B Reserved | |
0x2C QoS Unacceptable Parameter | |
0x2D QoS Rejected | |
0x2E Channel Classification Not Supported | |
0x2F Insufficient Security | |
0x30 Parameter Out Of Mandatory Range | |
0x31 Reserved | |
0x32 Role Switch Pending | |
0x33 Reserved | |
0x34 Reserved Slot Violation | |
0x35 Role Switch Failed | |
0x36 Extended Inquiry Response Too Large | |
0x37 Secure Simple Pairing Not Supported By Host. | |
0x38 Host Busy - Pairing | |
0x39 Connection Rejected due to No Suitable Channel Found*/ | |
#define BLE_HCI_CONTROLLER_BUSY 0x3A /**< Controller Busy. */ | |
#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B /**< Connection Interval Unacceptable. */ | |
#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C /**< Directed Advertisement Timeout. */ | |
#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D /**< Connection Terminated due to MIC Failure. */ | |
#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E /**< Connection Failed to be Established. */ | |
/** @} */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif // BLE_HCI_H__ | |
/** @} */ |