| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of Freescale Semiconductor, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "fsl_xcvr.h" |
| |
| /******************************************************************************* |
| * Definitions |
| ******************************************************************************/ |
| |
| /******************************************************************************* |
| * Prototypes |
| ******************************************************************************/ |
| |
| /******************************************************************************* |
| * Variables |
| ******************************************************************************/ |
| |
| /******************************************************************************* |
| * Code |
| ******************************************************************************/ |
| const xcvr_mode_config_t zgbe_mode_config = |
| { |
| .radio_mode = ZIGBEE_MODE, |
| .scgc5_clock_ena_bits = SIM_SCGC5_PHYDIG_MASK | SIM_SCGC5_ZigBee_MASK, |
| |
| /* XCVR_MISC configs */ |
| .xcvr_ctrl.mask = XCVR_CTRL_XCVR_CTRL_PROTOCOL_MASK | |
| XCVR_CTRL_XCVR_CTRL_TGT_PWR_SRC_MASK | |
| XCVR_CTRL_XCVR_CTRL_DEMOD_SEL_MASK, |
| .xcvr_ctrl.init = XCVR_CTRL_XCVR_CTRL_PROTOCOL(4) | |
| XCVR_CTRL_XCVR_CTRL_TGT_PWR_SRC(7) | |
| XCVR_CTRL_XCVR_CTRL_DEMOD_SEL(2), |
| |
| /* XCVR_PHY configs */ |
| .phy_pre_ref0_init = 0x0, /* Not used in Zigbee */ |
| .phy_pre_ref1_init = 0x0, /* Not used in Zigbee */ |
| .phy_pre_ref2_init = 0x0, /* Not used in Zigbee */ |
| |
| .phy_cfg1_init = XCVR_PHY_CFG1_AA_PLAYBACK(0) | |
| XCVR_PHY_CFG1_AA_OUTPUT_SEL(1) | |
| XCVR_PHY_CFG1_FSK_BIT_INVERT(0) | |
| XCVR_PHY_CFG1_BSM_EN_BLE(0) | |
| XCVR_PHY_CFG1_DEMOD_CLK_MODE(0) | |
| XCVR_PHY_CFG1_CTS_THRESH(0xC0) | |
| XCVR_PHY_CFG1_FSK_FTS_TIMEOUT(2), |
| |
| .phy_el_cfg_init = XCVR_PHY_EL_CFG_EL_ENABLE(1) |
| #if !RADIO_IS_GEN_2P1 |
| | XCVR_PHY_EL_CFG_EL_ZB_ENABLE(0) |
| #endif /* !RADIO_IS_GEN_2P1 */ |
| , |
| |
| /* XCVR_PLL_DIG configs */ |
| |
| /* XCVR_RX_DIG configs */ |
| .rx_dig_ctrl_init_26mhz = XCVR_RX_DIG_RX_DIG_CTRL_RX_FSK_ZB_SEL(1) | /* Depends on protocol */ |
| XCVR_RX_DIG_RX_DIG_CTRL_RX_DC_RESID_EN(1) | /* Depends on protocol */ |
| XCVR_RX_DIG_RX_DIG_CTRL_RX_SRC_RATE(0), |
| |
| .rx_dig_ctrl_init_32mhz = XCVR_RX_DIG_RX_DIG_CTRL_RX_FSK_ZB_SEL(1) | /* Depends on protocol */ |
| XCVR_RX_DIG_RX_DIG_CTRL_RX_DC_RESID_EN(1), /* Depends on protocol */ |
| |
| .agc_ctrl_0_init = XCVR_RX_DIG_AGC_CTRL_0_AGC_DOWN_RSSI_THRESH(0xFF), |
| /* XCVR_TSM configs */ |
| #if (DATA_PADDING_EN) |
| .tsm_timing_35_init = B0(TX_DIG_EN_ASSERT+ZGBE_TX_DIG_EN_TX_HI_ADJ), /* DATA_PADDING adjustments are specified relative to the non-Zigbee base timing */ |
| #else |
| .tsm_timing_35_init = B0(ZGBE_TX_DIG_EN_ASSERT), |
| #endif /* (DATA_PADDING_EN) */ |
| |
| /* XCVR_TX_DIG configs */ |
| .tx_gfsk_ctrl = XCVR_TX_DIG_GFSK_CTRL_GFSK_MULTIPLY_TABLE_MANUAL(0x4000) | |
| XCVR_TX_DIG_GFSK_CTRL_GFSK_MI(1) | |
| XCVR_TX_DIG_GFSK_CTRL_GFSK_MLD(0) | |
| XCVR_TX_DIG_GFSK_CTRL_GFSK_FLD(0) | |
| XCVR_TX_DIG_GFSK_CTRL_GFSK_MOD_INDEX_SCALING(0) | |
| XCVR_TX_DIG_GFSK_CTRL_TX_IMAGE_FILTER_OVRD_EN(0) | |
| XCVR_TX_DIG_GFSK_CTRL_TX_IMAGE_FILTER_0_OVRD(0) | |
| XCVR_TX_DIG_GFSK_CTRL_TX_IMAGE_FILTER_1_OVRD(0) | |
| XCVR_TX_DIG_GFSK_CTRL_TX_IMAGE_FILTER_2_OVRD(0) , |
| .tx_gfsk_coeff1_26mhz = 0, |
| .tx_gfsk_coeff2_26mhz = 0, |
| .tx_gfsk_coeff1_32mhz = 0, |
| .tx_gfsk_coeff2_32mhz = 0, |
| }; |
| |
| const xcvr_mode_datarate_config_t xcvr_ZIGBEE_500kbps_config = |
| { |
| .radio_mode = ZIGBEE_MODE, |
| .data_rate = DR_500KBPS, |
| |
| .ana_sy_ctrl2.mask = XCVR_ANALOG_SY_CTRL_2_SY_VCO_KVM_MASK, |
| .ana_sy_ctrl2.init = XCVR_ANALOG_SY_CTRL_2_SY_VCO_KVM(1), /* VCO KVM */ |
| |
| .ana_rx_bba.mask = XCVR_ANALOG_RX_BBA_RX_BBA_BW_SEL_MASK | XCVR_ANALOG_RX_BBA_RX_BBA2_BW_SEL_MASK, |
| .ana_rx_bba.init = XCVR_ANALOG_RX_BBA_RX_BBA_BW_SEL(1) | XCVR_ANALOG_RX_BBA_RX_BBA2_BW_SEL(1), /* BBA_BW_SEL and BBA2_BW_SEL */ |
| .ana_rx_tza.mask = XCVR_ANALOG_RX_TZA_RX_TZA_BW_SEL_MASK, |
| .ana_rx_tza.init = XCVR_ANALOG_RX_TZA_RX_TZA_BW_SEL(1), /*TZA_BW_SEL */ |
| |
| .phy_cfg2_init = XCVR_PHY_CFG2_PHY_FIFO_PRECHG(8) | |
| XCVR_PHY_CFG2_X2_DEMOD_GAIN(0xA) , |
| |
| /* AGC configs */ |
| .agc_ctrl_2_init_26mhz = XCVR_RX_DIG_AGC_CTRL_2_BBA_GAIN_SETTLE_TIME(8) | |
| XCVR_RX_DIG_AGC_CTRL_2_BBA_PDET_SEL_LO(5) | |
| XCVR_RX_DIG_AGC_CTRL_2_BBA_PDET_SEL_HI(6) | |
| XCVR_RX_DIG_AGC_CTRL_2_TZA_PDET_SEL_LO(3) | |
| XCVR_RX_DIG_AGC_CTRL_2_TZA_PDET_SEL_HI(5) | |
| XCVR_RX_DIG_AGC_CTRL_2_AGC_FAST_EXPIRE(5), |
| .agc_ctrl_2_init_32mhz = XCVR_RX_DIG_AGC_CTRL_2_BBA_GAIN_SETTLE_TIME(10) | |
| XCVR_RX_DIG_AGC_CTRL_2_BBA_PDET_SEL_LO(5) | |
| XCVR_RX_DIG_AGC_CTRL_2_BBA_PDET_SEL_HI(6) | |
| XCVR_RX_DIG_AGC_CTRL_2_TZA_PDET_SEL_LO(3) | |
| XCVR_RX_DIG_AGC_CTRL_2_TZA_PDET_SEL_HI(5) | |
| XCVR_RX_DIG_AGC_CTRL_2_AGC_FAST_EXPIRE(5), |
| |
| /* All constant values are represented as 16 bits, register writes will remove unused bits */ |
| .rx_chf_coeffs_26mhz.rx_chf_coef_0 = 0xFFFF, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_1 = 0xFFFF, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_2 = 0x0002, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_3 = 0x0008, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_4 = 0x000A, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_5 = 0x0000, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_6 = 0xFFE8, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_7 = 0xFFD7, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_8 = 0xFFE6, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_9 = 0x0022, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_10 = 0x0075, |
| .rx_chf_coeffs_26mhz.rx_chf_coef_11 = 0x00B2, |
| |
| /* IEEE 802.15.4 32MHz Channel Filter -- 1.55/1.25/5/0.97/B5 */ |
| .rx_chf_coeffs_32mhz.rx_chf_coef_0 = 0xFFFF, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_1 = 0xFFFF, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_2 = 0x0005, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_3 = 0x0004, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_4 = 0xFFF2, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_5 = 0xFFF2, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_6 = 0x001D, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_7 = 0x0025, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_8 = 0xFFCE, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_9 = 0xFFA1, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_10 = 0x0040, |
| .rx_chf_coeffs_32mhz.rx_chf_coef_11 = 0x0124, |
| |
| .rx_rccal_ctrl_0 = XCVR_RX_DIG_RX_RCCAL_CTRL0_BBA_RCCAL_OFFSET(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL0_BBA_RCCAL_MANUAL(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL0_BBA_RCCAL_DIS(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL0_RCCAL_SMP_DLY(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL0_RCCAL_COMP_INV(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL0_TZA_RCCAL_OFFSET(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL0_TZA_RCCAL_MANUAL(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL0_TZA_RCCAL_DIS(0) , |
| .rx_rccal_ctrl_1 = XCVR_RX_DIG_RX_RCCAL_CTRL1_ADC_RCCAL_OFFSET(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL1_ADC_RCCAL_MANUAL(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL1_ADC_RCCAL_DIS(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL1_BBA2_RCCAL_OFFSET(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL1_BBA2_RCCAL_MANUAL(0) | |
| XCVR_RX_DIG_RX_RCCAL_CTRL1_BBA2_RCCAL_DIS(0) , |
| |
| .tx_fsk_scale_26mhz = XCVR_TX_DIG_FSK_SCALE_FSK_MODULATION_SCALE_0(0x1627) | XCVR_TX_DIG_FSK_SCALE_FSK_MODULATION_SCALE_1(0x09d9), |
| .tx_fsk_scale_32mhz = XCVR_TX_DIG_FSK_SCALE_FSK_MODULATION_SCALE_0(0x1800) | XCVR_TX_DIG_FSK_SCALE_FSK_MODULATION_SCALE_1(0x0800), |
| }; |
| |
| /* CUSTOM datarate dependent config structure for ONLY 802.15.4 */ |
| /*! |
| * @brief XCVR 500K bps DATA RATE specific configure structure |
| */ |
| const xcvr_datarate_config_t xcvr_802_15_4_500kbps_config = |
| { |
| .data_rate = DR_500KBPS, |
| .phy_el_cfg_init = XCVR_PHY_EL_CFG_EL_ZB_WIN_SIZE(0) | |
| XCVR_PHY_EL_CFG_EL_WIN_SIZE(0x8) | |
| XCVR_PHY_EL_CFG_EL_INTERVAL(0x10) , |
| .rx_dig_ctrl_init_26mhz = XCVR_RX_DIG_RX_DIG_CTRL_RX_DEC_FILT_OSR(1) | |
| XCVR_RX_DIG_RX_DIG_CTRL_RX_DEC_FILT_GAIN(16), |
| .rx_dig_ctrl_init_32mhz = XCVR_RX_DIG_RX_DIG_CTRL_RX_DEC_FILT_OSR(2) | |
| XCVR_RX_DIG_RX_DIG_CTRL_RX_DEC_FILT_GAIN(16), |
| |
| .agc_ctrl_1_init_26mhz = XCVR_RX_DIG_AGC_CTRL_1_LNA_GAIN_SETTLE_TIME(13) | |
| XCVR_RX_DIG_AGC_CTRL_1_PRESLOW_EN(PRESLOW_ENA), |
| .agc_ctrl_1_init_32mhz = XCVR_RX_DIG_AGC_CTRL_1_LNA_GAIN_SETTLE_TIME(10) | |
| XCVR_RX_DIG_AGC_CTRL_1_PRESLOW_EN(PRESLOW_ENA), |
| |
| .dcoc_ctrl_0_init_26mhz = XCVR_RX_DIG_DCOC_CTRL_0_DCOC_CORR_DLY(13) | |
| XCVR_RX_DIG_DCOC_CTRL_0_DCOC_CORR_HOLD_TIME(29), |
| .dcoc_ctrl_0_init_32mhz = XCVR_RX_DIG_DCOC_CTRL_0_DCOC_CORR_DLY(21) | |
| XCVR_RX_DIG_DCOC_CTRL_0_DCOC_CORR_HOLD_TIME(47), |
| |
| .dcoc_ctrl_1_init_26mhz = XCVR_RX_DIG_DCOC_CTRL_1_DCOC_SIGN_SCALE_IDX(1) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_ALPHAC_SCALE_IDX(3) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_ALPHA_RADIUS_IDX(2) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_TRK_EST_GS_CNT(0) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_SIGN_SCALE_GS_IDX(1) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_ALPHAC_SCALE_GS_IDX(3) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_ALPHA_RADIUS_GS_IDX(2), |
| |
| .dcoc_ctrl_1_init_32mhz = XCVR_RX_DIG_DCOC_CTRL_1_DCOC_SIGN_SCALE_IDX(1) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_ALPHAC_SCALE_IDX(3) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_ALPHA_RADIUS_IDX(2) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_TRK_EST_GS_CNT(0) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_SIGN_SCALE_GS_IDX(1) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_ALPHAC_SCALE_GS_IDX(3) | |
| XCVR_RX_DIG_DCOC_CTRL_1_DCOC_ALPHA_RADIUS_GS_IDX(2), |
| |
| .dcoc_cal_iir_init_26mhz = XCVR_RX_DIG_DCOC_CAL_IIR_DCOC_CAL_IIR3A_IDX(2) | |
| XCVR_RX_DIG_DCOC_CAL_IIR_DCOC_CAL_IIR2A_IDX(2) | |
| XCVR_RX_DIG_DCOC_CAL_IIR_DCOC_CAL_IIR1A_IDX(2), |
| .dcoc_cal_iir_init_32mhz = XCVR_RX_DIG_DCOC_CAL_IIR_DCOC_CAL_IIR3A_IDX(1) | |
| XCVR_RX_DIG_DCOC_CAL_IIR_DCOC_CAL_IIR2A_IDX(2) | |
| XCVR_RX_DIG_DCOC_CAL_IIR_DCOC_CAL_IIR1A_IDX(1), |
| |
| .dc_resid_ctrl_26mhz = XCVR_RX_DIG_DC_RESID_CTRL_DC_RESID_NWIN(26) | |
| XCVR_RX_DIG_DC_RESID_CTRL_DC_RESID_DLY(4), |
| .dc_resid_ctrl_32mhz = XCVR_RX_DIG_DC_RESID_CTRL_DC_RESID_NWIN(48) | |
| XCVR_RX_DIG_DC_RESID_CTRL_DC_RESID_DLY(0), |
| }; |
| |
