| /****************************************************************************** |
| * Filename: setup.h |
| * Revised: 2016-05-18 12:51:22 +0200 (Wed, 18 May 2016) |
| * Revision: 46398 |
| * |
| * Description: Prototypes and defines for the setup API. |
| * |
| * Copyright (c) 2015 - 2016, Texas Instruments Incorporated |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1) Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2) Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3) Neither the name of the ORGANIZATION nor the names of its contributors may |
| * be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ******************************************************************************/ |
| |
| //***************************************************************************** |
| // |
| //! \addtogroup system_control_group |
| //! @{ |
| //! \addtogroup setup_api |
| //! @{ |
| // |
| //***************************************************************************** |
| |
| #ifndef __SETUP_H__ |
| #define __SETUP_H__ |
| |
| //***************************************************************************** |
| // |
| // If building with a C++ compiler, make all of the definitions in this header |
| // have a C binding. |
| // |
| //***************************************************************************** |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| // Hardware headers |
| #include <inc/hw_memmap.h> |
| #include <inc/hw_types.h> |
| #include <inc/hw_adi.h> |
| #include <inc/hw_adi_0_rf.h> |
| #include <inc/hw_adi_1_synth.h> |
| #include <inc/hw_adi_2_refsys.h> |
| #include <inc/hw_adi_3_refsys.h> |
| #include <inc/hw_adi_4_aux.h> |
| #include <inc/hw_aon_ioc.h> |
| #include <inc/hw_aon_sysctl.h> |
| #include <inc/hw_aon_wuc.h> |
| #include <inc/hw_aux_wuc.h> |
| #include <inc/hw_ccfg.h> |
| #include <inc/hw_chip_def.h> |
| #include <inc/hw_ddi.h> |
| #include <inc/hw_flash.h> |
| #include <inc/hw_fcfg1.h> |
| #include <inc/hw_ddi_0_osc.h> |
| #include <inc/hw_prcm.h> |
| #include <inc/hw_vims.h> |
| #include <inc/hw_aon_batmon.h> |
| #include <inc/hw_aon_rtc.h> |
| // Driverlib headers |
| #include <driverlib/adi.h> |
| #include <driverlib/aon_batmon.h> |
| #include <driverlib/cpu.h> |
| #include <driverlib/chipinfo.h> |
| #include <driverlib/ddi.h> |
| #include <driverlib/ioc.h> |
| #include <driverlib/prcm.h> |
| #include <driverlib/setup.h> |
| #include <driverlib/sys_ctrl.h> |
| |
| //***************************************************************************** |
| // |
| // Support for DriverLib in ROM: |
| // This section renames all functions that are not "static inline", so that |
| // calling these functions will default to implementation in flash. At the end |
| // of this file a second renaming will change the defaults to implementation in |
| // ROM for available functions. |
| // |
| // To force use of the implementation in flash, e.g. for debugging: |
| // - Globally: Define DRIVERLIB_NOROM at project level |
| // - Per function: Use prefix "NOROM_" when calling the function |
| // |
| //***************************************************************************** |
| #if !defined(DOXYGEN) |
| #define SetupTrimDevice NOROM_SetupTrimDevice |
| #define SetupAfterColdResetWakeupFromShutDownCfg1 NOROM_SetupAfterColdResetWakeupFromShutDownCfg1 |
| #define SetupAfterColdResetWakeupFromShutDownCfg2 NOROM_SetupAfterColdResetWakeupFromShutDownCfg2 |
| #define SetupAfterColdResetWakeupFromShutDownCfg3 NOROM_SetupAfterColdResetWakeupFromShutDownCfg3 |
| #define SetupGetTrimForAdcShModeEn NOROM_SetupGetTrimForAdcShModeEn |
| #define SetupGetTrimForAdcShVbufEn NOROM_SetupGetTrimForAdcShVbufEn |
| #define SetupGetTrimForAmpcompCtrl NOROM_SetupGetTrimForAmpcompCtrl |
| #define SetupGetTrimForAmpcompTh1 NOROM_SetupGetTrimForAmpcompTh1 |
| #define SetupGetTrimForAmpcompTh2 NOROM_SetupGetTrimForAmpcompTh2 |
| #define SetupGetTrimForAnabypassValue1 NOROM_SetupGetTrimForAnabypassValue1 |
| #define SetupGetTrimForDblrLoopFilterResetVoltage NOROM_SetupGetTrimForDblrLoopFilterResetVoltage |
| #define SetupGetTrimForRadcExtCfg NOROM_SetupGetTrimForRadcExtCfg |
| #define SetupGetTrimForRcOscLfIBiasTrim NOROM_SetupGetTrimForRcOscLfIBiasTrim |
| #define SetupGetTrimForRcOscLfRtuneCtuneTrim NOROM_SetupGetTrimForRcOscLfRtuneCtuneTrim |
| #define SetupGetTrimForXoscHfCtl NOROM_SetupGetTrimForXoscHfCtl |
| #define SetupGetTrimForXoscHfFastStart NOROM_SetupGetTrimForXoscHfFastStart |
| #define SetupGetTrimForXoscHfIbiastherm NOROM_SetupGetTrimForXoscHfIbiastherm |
| #define SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio NOROM_SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio |
| #define SetupSignExtendVddrTrimValue NOROM_SetupSignExtendVddrTrimValue |
| #define SetupSetCacheModeAccordingToCcfgSetting NOROM_SetupSetCacheModeAccordingToCcfgSetting |
| #define SetupSetAonRtcSubSecInc NOROM_SetupSetAonRtcSubSecInc |
| #endif |
| |
| //***************************************************************************** |
| // |
| //! \brief Performs the necessary trim of the device which is not done in boot code. |
| //! |
| //! This function should only execute coming from ROM boot. The current |
| //! implementation does not take soft reset into account. However, it does no |
| //! damage to execute it again. It only consumes time. |
| //! |
| //! \return None |
| // |
| //***************************************************************************** |
| extern void SetupTrimDevice( void ); |
| |
| //***************************************************************************** |
| // |
| //! \brief First part of configuration required when waking up from shutdown. |
| // |
| //***************************************************************************** |
| extern void SetupAfterColdResetWakeupFromShutDownCfg1( uint32_t ccfg_ModeConfReg ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Second part of configuration required when waking up from shutdown. |
| // |
| //***************************************************************************** |
| extern void SetupAfterColdResetWakeupFromShutDownCfg2( uint32_t ui32Fcfg1Revision, uint32_t ccfg_ModeConfReg ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Third part of configuration required when waking up from shutdown. |
| // |
| //***************************************************************************** |
| extern void SetupAfterColdResetWakeupFromShutDownCfg3( uint32_t ccfg_ModeConfReg ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value from FCFG1 to be used as ADC_SH_MODE_EN setting. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForAdcShModeEn( uint32_t ui32Fcfg1Revision ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value from FCFG1 to be used as ADC_SH_VBUF_EN setting. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForAdcShVbufEn( uint32_t ui32Fcfg1Revision ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used for the AMPCOMP_CTRL register in OSC_DIG. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForAmpcompCtrl( uint32_t ui32Fcfg1Revision ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used for the AMPCOMP_TH1 register in OSC_DIG. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForAmpcompTh1( void ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used for the AMPCOMP_TH2 register in OSC_DIG. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForAmpcompTh2( void ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used for the ANABYPASS_VALUE1 register in OSC_DIG. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForAnabypassValue1( uint32_t ccfg_ModeConfReg ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value from FCFG1 to be used as DBLR_LOOP_FILTER_RESET_VOLTAGE setting. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForDblrLoopFilterResetVoltage( uint32_t ui32Fcfg1Revision ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used for the RADCEXTCFG register in OSC_DIG. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForRadcExtCfg( uint32_t ui32Fcfg1Revision ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the FCFG1 OSC_CONF_ATESTLF_RCOSCLF_IBIAS_TRIM. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForRcOscLfIBiasTrim( uint32_t ui32Fcfg1Revision ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used for the RCOSCLF_RTUNE_TRIM and the |
| //! RCOSCLF_CTUNE_TRIM bit fields in the XOSCLF_RCOSCLF_CTRL register in OSC_DIG. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForRcOscLfRtuneCtuneTrim( void ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used for the XOSCHFCTL register in OSC_DIG. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForXoscHfCtl( uint32_t ui32Fcfg1Revision ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used as OSC_DIG:CTL1.XOSC_HF_FAST_START. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForXoscHfFastStart( void ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns the trim value to be used for the XOSC_HF_IBIASTHERM bit field in |
| //! the ANABYPASS_VALUE2 register in OSC_DIG. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForXoscHfIbiastherm( void ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Returns XOSCLF_REGULATOR_TRIM and XOSCLF_CMIRRWR_RATIO as one packet |
| //! spanning bits [5:0] in the returned value. |
| // |
| //***************************************************************************** |
| extern uint32_t SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio( uint32_t ui32Fcfg1Revision ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Sign extend the VDDR_TRIM setting (special format ranging from -10 to +21) |
| //! |
| //! \return |
| // |
| //***************************************************************************** |
| extern int32_t SetupSignExtendVddrTrimValue( uint32_t ui32VddrTrimVal ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Set correct VIMS_MODE according to CCFG setting (CACHE or GPRAM) |
| //! |
| //! \return None |
| // |
| //***************************************************************************** |
| extern void SetupSetCacheModeAccordingToCcfgSetting( void ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Doing the tricky stuff needed to enter new RTCSUBSECINC value |
| //! |
| //! \return None |
| // |
| //***************************************************************************** |
| extern void SetupSetAonRtcSubSecInc( uint32_t subSecInc ); |
| |
| //***************************************************************************** |
| // |
| //! \brief Set VDDR boost mode |
| //! |
| //! \return None |
| // |
| //***************************************************************************** |
| |
| //***************************************************************************** |
| // |
| // Support for DriverLib in ROM: |
| // Redirect to implementation in ROM when available. |
| // |
| //***************************************************************************** |
| #if !defined(DRIVERLIB_NOROM) && !defined(DOXYGEN) |
| #include <driverlib/rom.h> |
| #ifdef ROM_SetupTrimDevice |
| #undef SetupTrimDevice |
| #define SetupTrimDevice ROM_SetupTrimDevice |
| #endif |
| #ifdef ROM_SetupAfterColdResetWakeupFromShutDownCfg1 |
| #undef SetupAfterColdResetWakeupFromShutDownCfg1 |
| #define SetupAfterColdResetWakeupFromShutDownCfg1 ROM_SetupAfterColdResetWakeupFromShutDownCfg1 |
| #endif |
| #ifdef ROM_SetupAfterColdResetWakeupFromShutDownCfg2 |
| #undef SetupAfterColdResetWakeupFromShutDownCfg2 |
| #define SetupAfterColdResetWakeupFromShutDownCfg2 ROM_SetupAfterColdResetWakeupFromShutDownCfg2 |
| #endif |
| #ifdef ROM_SetupAfterColdResetWakeupFromShutDownCfg3 |
| #undef SetupAfterColdResetWakeupFromShutDownCfg3 |
| #define SetupAfterColdResetWakeupFromShutDownCfg3 ROM_SetupAfterColdResetWakeupFromShutDownCfg3 |
| #endif |
| #ifdef ROM_SetupGetTrimForAdcShModeEn |
| #undef SetupGetTrimForAdcShModeEn |
| #define SetupGetTrimForAdcShModeEn ROM_SetupGetTrimForAdcShModeEn |
| #endif |
| #ifdef ROM_SetupGetTrimForAdcShVbufEn |
| #undef SetupGetTrimForAdcShVbufEn |
| #define SetupGetTrimForAdcShVbufEn ROM_SetupGetTrimForAdcShVbufEn |
| #endif |
| #ifdef ROM_SetupGetTrimForAmpcompCtrl |
| #undef SetupGetTrimForAmpcompCtrl |
| #define SetupGetTrimForAmpcompCtrl ROM_SetupGetTrimForAmpcompCtrl |
| #endif |
| #ifdef ROM_SetupGetTrimForAmpcompTh1 |
| #undef SetupGetTrimForAmpcompTh1 |
| #define SetupGetTrimForAmpcompTh1 ROM_SetupGetTrimForAmpcompTh1 |
| #endif |
| #ifdef ROM_SetupGetTrimForAmpcompTh2 |
| #undef SetupGetTrimForAmpcompTh2 |
| #define SetupGetTrimForAmpcompTh2 ROM_SetupGetTrimForAmpcompTh2 |
| #endif |
| #ifdef ROM_SetupGetTrimForAnabypassValue1 |
| #undef SetupGetTrimForAnabypassValue1 |
| #define SetupGetTrimForAnabypassValue1 ROM_SetupGetTrimForAnabypassValue1 |
| #endif |
| #ifdef ROM_SetupGetTrimForDblrLoopFilterResetVoltage |
| #undef SetupGetTrimForDblrLoopFilterResetVoltage |
| #define SetupGetTrimForDblrLoopFilterResetVoltage ROM_SetupGetTrimForDblrLoopFilterResetVoltage |
| #endif |
| #ifdef ROM_SetupGetTrimForRadcExtCfg |
| #undef SetupGetTrimForRadcExtCfg |
| #define SetupGetTrimForRadcExtCfg ROM_SetupGetTrimForRadcExtCfg |
| #endif |
| #ifdef ROM_SetupGetTrimForRcOscLfIBiasTrim |
| #undef SetupGetTrimForRcOscLfIBiasTrim |
| #define SetupGetTrimForRcOscLfIBiasTrim ROM_SetupGetTrimForRcOscLfIBiasTrim |
| #endif |
| #ifdef ROM_SetupGetTrimForRcOscLfRtuneCtuneTrim |
| #undef SetupGetTrimForRcOscLfRtuneCtuneTrim |
| #define SetupGetTrimForRcOscLfRtuneCtuneTrim ROM_SetupGetTrimForRcOscLfRtuneCtuneTrim |
| #endif |
| #ifdef ROM_SetupGetTrimForXoscHfCtl |
| #undef SetupGetTrimForXoscHfCtl |
| #define SetupGetTrimForXoscHfCtl ROM_SetupGetTrimForXoscHfCtl |
| #endif |
| #ifdef ROM_SetupGetTrimForXoscHfFastStart |
| #undef SetupGetTrimForXoscHfFastStart |
| #define SetupGetTrimForXoscHfFastStart ROM_SetupGetTrimForXoscHfFastStart |
| #endif |
| #ifdef ROM_SetupGetTrimForXoscHfIbiastherm |
| #undef SetupGetTrimForXoscHfIbiastherm |
| #define SetupGetTrimForXoscHfIbiastherm ROM_SetupGetTrimForXoscHfIbiastherm |
| #endif |
| #ifdef ROM_SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio |
| #undef SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio |
| #define SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio ROM_SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio |
| #endif |
| #ifdef ROM_SetupSignExtendVddrTrimValue |
| #undef SetupSignExtendVddrTrimValue |
| #define SetupSignExtendVddrTrimValue ROM_SetupSignExtendVddrTrimValue |
| #endif |
| #ifdef ROM_SetupSetCacheModeAccordingToCcfgSetting |
| #undef SetupSetCacheModeAccordingToCcfgSetting |
| #define SetupSetCacheModeAccordingToCcfgSetting ROM_SetupSetCacheModeAccordingToCcfgSetting |
| #endif |
| #ifdef ROM_SetupSetAonRtcSubSecInc |
| #undef SetupSetAonRtcSubSecInc |
| #define SetupSetAonRtcSubSecInc ROM_SetupSetAonRtcSubSecInc |
| #endif |
| #endif |
| |
| //***************************************************************************** |
| // |
| // Mark the end of the C bindings section for C++ compilers. |
| // |
| //***************************************************************************** |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // __SETUP_H__ |
| |
| //***************************************************************************** |
| // |
| //! Close the Doxygen group. |
| //! @} |
| //! @} |
| // |
| //***************************************************************************** |
