/**************************************************************************//** | |
* @file cmsis_armcc_V6.h | |
* @brief CMSIS Cortex-M Core Function/Instruction Header File | |
* @version V4.30 | |
* @date 20. October 2015 | |
******************************************************************************/ | |
/* Copyright (c) 2009 - 2015 ARM LIMITED | |
All rights reserved. | |
Redistribution and use in source and binary forms, with or without | |
modification, are permitted provided that the following conditions are met: | |
- Redistributions of source code must retain the above copyright | |
notice, this list of conditions and the following disclaimer. | |
- Redistributions in binary form must reproduce the above copyright | |
notice, this list of conditions and the following disclaimer in the | |
documentation and/or other materials provided with the distribution. | |
- Neither the name of ARM nor the names of its contributors may be used | |
to endorse or promote products derived from this software without | |
specific prior written permission. | |
* | |
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE | |
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
POSSIBILITY OF SUCH DAMAGE. | |
---------------------------------------------------------------------------*/ | |
#ifndef __CMSIS_ARMCC_V6_H | |
#define __CMSIS_ARMCC_V6_H | |
/* ########################### Core Function Access ########################### */ | |
/** \ingroup CMSIS_Core_FunctionInterface | |
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions | |
@{ | |
*/ | |
/** | |
\brief Enable IRQ Interrupts | |
\details Enables IRQ interrupts by clearing the I-bit in the CPSR. | |
Can only be executed in Privileged modes. | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void) | |
{ | |
__ASM volatile("cpsie i" : : : "memory"); | |
} | |
/** | |
\brief Disable IRQ Interrupts | |
\details Disables IRQ interrupts by setting the I-bit in the CPSR. | |
Can only be executed in Privileged modes. | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void) | |
{ | |
__ASM volatile("cpsid i" : : : "memory"); | |
} | |
/** | |
\brief Get Control Register | |
\details Returns the content of the Control Register. | |
\return Control Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, control" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get Control Register (non-secure) | |
\details Returns the content of the non-secure Control Register when in secure mode. | |
\return non-secure Control Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, control_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Set Control Register | |
\details Writes the given value to the Control Register. | |
\param [in] control Control Register value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control) | |
{ | |
__ASM volatile("MSR control, %0" : : "r"(control) : "memory"); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Set Control Register (non-secure) | |
\details Writes the given value to the non-secure Control Register when in secure state. | |
\param [in] control Control Register value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control) | |
{ | |
__ASM volatile("MSR control_ns, %0" : : "r"(control) : "memory"); | |
} | |
#endif | |
/** | |
\brief Get IPSR Register | |
\details Returns the content of the IPSR Register. | |
\return IPSR Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, ipsr" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get IPSR Register (non-secure) | |
\details Returns the content of the non-secure IPSR Register when in secure state. | |
\return IPSR Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, ipsr_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Get APSR Register | |
\details Returns the content of the APSR Register. | |
\return APSR Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, apsr" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get APSR Register (non-secure) | |
\details Returns the content of the non-secure APSR Register when in secure state. | |
\return APSR Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, apsr_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Get xPSR Register | |
\details Returns the content of the xPSR Register. | |
\return xPSR Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, xpsr" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get xPSR Register (non-secure) | |
\details Returns the content of the non-secure xPSR Register when in secure state. | |
\return xPSR Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, xpsr_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Get Process Stack Pointer | |
\details Returns the current value of the Process Stack Pointer (PSP). | |
\return PSP Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void) | |
{ | |
register uint32_t result; | |
__ASM volatile("MRS %0, psp" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get Process Stack Pointer (non-secure) | |
\details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. | |
\return PSP Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void) | |
{ | |
register uint32_t result; | |
__ASM volatile("MRS %0, psp_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Set Process Stack Pointer | |
\details Assigns the given value to the Process Stack Pointer (PSP). | |
\param [in] topOfProcStack Process Stack Pointer value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) | |
{ | |
__ASM volatile("MSR psp, %0" : : "r"(topOfProcStack) : "sp"); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Set Process Stack Pointer (non-secure) | |
\details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. | |
\param [in] topOfProcStack Process Stack Pointer value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) | |
{ | |
__ASM volatile("MSR psp_ns, %0" : : "r"(topOfProcStack) : "sp"); | |
} | |
#endif | |
/** | |
\brief Get Main Stack Pointer | |
\details Returns the current value of the Main Stack Pointer (MSP). | |
\return MSP Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void) | |
{ | |
register uint32_t result; | |
__ASM volatile("MRS %0, msp" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get Main Stack Pointer (non-secure) | |
\details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. | |
\return MSP Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void) | |
{ | |
register uint32_t result; | |
__ASM volatile("MRS %0, msp_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Set Main Stack Pointer | |
\details Assigns the given value to the Main Stack Pointer (MSP). | |
\param [in] topOfMainStack Main Stack Pointer value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) | |
{ | |
__ASM volatile("MSR msp, %0" : : "r"(topOfMainStack) : "sp"); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Set Main Stack Pointer (non-secure) | |
\details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. | |
\param [in] topOfMainStack Main Stack Pointer value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) | |
{ | |
__ASM volatile("MSR msp_ns, %0" : : "r"(topOfMainStack) : "sp"); | |
} | |
#endif | |
/** | |
\brief Get Priority Mask | |
\details Returns the current state of the priority mask bit from the Priority Mask Register. | |
\return Priority Mask value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, primask" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get Priority Mask (non-secure) | |
\details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. | |
\return Priority Mask value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, primask_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Set Priority Mask | |
\details Assigns the given value to the Priority Mask Register. | |
\param [in] priMask Priority Mask | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) | |
{ | |
__ASM volatile("MSR primask, %0" : : "r"(priMask) : "memory"); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Set Priority Mask (non-secure) | |
\details Assigns the given value to the non-secure Priority Mask Register when in secure state. | |
\param [in] priMask Priority Mask | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) | |
{ | |
__ASM volatile("MSR primask_ns, %0" : : "r"(priMask) : "memory"); | |
} | |
#endif | |
#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ | |
/** | |
\brief Enable FIQ | |
\details Enables FIQ interrupts by clearing the F-bit in the CPSR. | |
Can only be executed in Privileged modes. | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void) | |
{ | |
__ASM volatile("cpsie f" : : : "memory"); | |
} | |
/** | |
\brief Disable FIQ | |
\details Disables FIQ interrupts by setting the F-bit in the CPSR. | |
Can only be executed in Privileged modes. | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void) | |
{ | |
__ASM volatile("cpsid f" : : : "memory"); | |
} | |
/** | |
\brief Get Base Priority | |
\details Returns the current value of the Base Priority register. | |
\return Base Priority register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, basepri" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get Base Priority (non-secure) | |
\details Returns the current value of the non-secure Base Priority register when in secure state. | |
\return Base Priority register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, basepri_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Set Base Priority | |
\details Assigns the given value to the Base Priority register. | |
\param [in] basePri Base Priority value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value) | |
{ | |
__ASM volatile("MSR basepri, %0" : : "r"(value) : "memory"); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Set Base Priority (non-secure) | |
\details Assigns the given value to the non-secure Base Priority register when in secure state. | |
\param [in] basePri Base Priority value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value) | |
{ | |
__ASM volatile("MSR basepri_ns, %0" : : "r"(value) : "memory"); | |
} | |
#endif | |
/** | |
\brief Set Base Priority with condition | |
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, | |
or the new value increases the BASEPRI priority level. | |
\param [in] basePri Base Priority value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value) | |
{ | |
__ASM volatile("MSR basepri_max, %0" : : "r"(value) : "memory"); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Set Base Priority with condition (non_secure) | |
\details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled, | |
or the new value increases the BASEPRI priority level. | |
\param [in] basePri Base Priority value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value) | |
{ | |
__ASM volatile("MSR basepri_max_ns, %0" : : "r"(value) : "memory"); | |
} | |
#endif | |
/** | |
\brief Get Fault Mask | |
\details Returns the current value of the Fault Mask register. | |
\return Fault Mask register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, faultmask" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get Fault Mask (non-secure) | |
\details Returns the current value of the non-secure Fault Mask register when in secure state. | |
\return Fault Mask register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void) | |
{ | |
uint32_t result; | |
__ASM volatile("MRS %0, faultmask_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Set Fault Mask | |
\details Assigns the given value to the Fault Mask register. | |
\param [in] faultMask Fault Mask value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) | |
{ | |
__ASM volatile("MSR faultmask, %0" : : "r"(faultMask) : "memory"); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Set Fault Mask (non-secure) | |
\details Assigns the given value to the non-secure Fault Mask register when in secure state. | |
\param [in] faultMask Fault Mask value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) | |
{ | |
__ASM volatile("MSR faultmask_ns, %0" : : "r"(faultMask) : "memory"); | |
} | |
#endif | |
#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ | |
#if (__ARM_ARCH_8M__ == 1U) | |
/** | |
\brief Get Process Stack Pointer Limit | |
\details Returns the current value of the Process Stack Pointer Limit (PSPLIM). | |
\return PSPLIM Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void) | |
{ | |
register uint32_t result; | |
__ASM volatile("MRS %0, psplim" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ | |
/** | |
\brief Get Process Stack Pointer Limit (non-secure) | |
\details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. | |
\return PSPLIM Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void) | |
{ | |
register uint32_t result; | |
__ASM volatile("MRS %0, psplim_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Set Process Stack Pointer Limit | |
\details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). | |
\param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) | |
{ | |
__ASM volatile("MSR psplim, %0" : : "r"(ProcStackPtrLimit)); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ | |
/** | |
\brief Set Process Stack Pointer (non-secure) | |
\details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. | |
\param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) | |
{ | |
__ASM volatile("MSR psplim_ns, %0\n" : : "r"(ProcStackPtrLimit)); | |
} | |
#endif | |
/** | |
\brief Get Main Stack Pointer Limit | |
\details Returns the current value of the Main Stack Pointer Limit (MSPLIM). | |
\return MSPLIM Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void) | |
{ | |
register uint32_t result; | |
__ASM volatile("MRS %0, msplim" : "=r"(result)); | |
return (result); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ | |
/** | |
\brief Get Main Stack Pointer Limit (non-secure) | |
\details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. | |
\return MSPLIM Register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void) | |
{ | |
register uint32_t result; | |
__ASM volatile("MRS %0, msplim_ns" : "=r"(result)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Set Main Stack Pointer Limit | |
\details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). | |
\param [in] MainStackPtrLimit Main Stack Pointer Limit value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) | |
{ | |
__ASM volatile("MSR msplim, %0" : : "r"(MainStackPtrLimit)); | |
} | |
#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ | |
/** | |
\brief Set Main Stack Pointer Limit (non-secure) | |
\details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. | |
\param [in] MainStackPtrLimit Main Stack Pointer value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) | |
{ | |
__ASM volatile("MSR msplim_ns, %0" : : "r"(MainStackPtrLimit)); | |
} | |
#endif | |
#endif /* (__ARM_ARCH_8M__ == 1U) */ | |
#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */ | |
/** | |
\brief Get FPSCR | |
\details eturns the current value of the Floating Point Status/Control register. | |
\return Floating Point Status/Control register value | |
*/ | |
#define __get_FPSCR __builtin_arm_get_fpscr | |
#if 0 | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void) | |
{ | |
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) | |
uint32_t result; | |
__ASM volatile(""); /* Empty asm statement works as a scheduling barrier */ | |
__ASM volatile("VMRS %0, fpscr" : "=r"(result)); | |
__ASM volatile(""); | |
return (result); | |
#else | |
return (0); | |
#endif | |
} | |
#endif | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Get FPSCR (non-secure) | |
\details Returns the current value of the non-secure Floating Point Status/Control register when in secure state. | |
\return Floating Point Status/Control register value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void) | |
{ | |
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) | |
uint32_t result; | |
__ASM volatile(""); /* Empty asm statement works as a scheduling barrier */ | |
__ASM volatile("VMRS %0, fpscr_ns" : "=r"(result)); | |
__ASM volatile(""); | |
return (result); | |
#else | |
return (0); | |
#endif | |
} | |
#endif | |
/** | |
\brief Set FPSCR | |
\details Assigns the given value to the Floating Point Status/Control register. | |
\param [in] fpscr Floating Point Status/Control value to set | |
*/ | |
#define __set_FPSCR __builtin_arm_set_fpscr | |
#if 0 | |
__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) | |
{ | |
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) | |
__ASM volatile(""); /* Empty asm statement works as a scheduling barrier */ | |
__ASM volatile("VMSR fpscr, %0" : : "r"(fpscr) : "vfpcc"); | |
__ASM volatile(""); | |
#endif | |
} | |
#endif | |
#if (__ARM_FEATURE_CMSE == 3U) | |
/** | |
\brief Set FPSCR (non-secure) | |
\details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state. | |
\param [in] fpscr Floating Point Status/Control value to set | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr) | |
{ | |
#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) | |
__ASM volatile(""); /* Empty asm statement works as a scheduling barrier */ | |
__ASM volatile("VMSR fpscr_ns, %0" : : "r"(fpscr) : "vfpcc"); | |
__ASM volatile(""); | |
#endif | |
} | |
#endif | |
#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ | |
/*@} end of CMSIS_Core_RegAccFunctions */ | |
/* ########################## Core Instruction Access ######################### */ | |
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface | |
Access to dedicated instructions | |
@{ | |
*/ | |
/* Define macros for porting to both thumb1 and thumb2. | |
* For thumb1, use low register (r0-r7), specified by constraint "l" | |
* Otherwise, use general registers, specified by constraint "r" */ | |
#if defined (__thumb__) && !defined (__thumb2__) | |
#define __CMSIS_GCC_OUT_REG(r) "=l" (r) | |
#define __CMSIS_GCC_USE_REG(r) "l" (r) | |
#else | |
#define __CMSIS_GCC_OUT_REG(r) "=r" (r) | |
#define __CMSIS_GCC_USE_REG(r) "r" (r) | |
#endif | |
/** | |
\brief No Operation | |
\details No Operation does nothing. This instruction can be used for code alignment purposes. | |
*/ | |
#define __NOP __builtin_arm_nop | |
/** | |
\brief Wait For Interrupt | |
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. | |
*/ | |
#define __WFI __builtin_arm_wfi | |
/** | |
\brief Wait For Event | |
\details Wait For Event is a hint instruction that permits the processor to enter | |
a low-power state until one of a number of events occurs. | |
*/ | |
#define __WFE __builtin_arm_wfe | |
/** | |
\brief Send Event | |
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU. | |
*/ | |
#define __SEV __builtin_arm_sev | |
/** | |
\brief Instruction Synchronization Barrier | |
\details Instruction Synchronization Barrier flushes the pipeline in the processor, | |
so that all instructions following the ISB are fetched from cache or memory, | |
after the instruction has been completed. | |
*/ | |
#define __ISB() __builtin_arm_isb(0xF); | |
/** | |
\brief Data Synchronization Barrier | |
\details Acts as a special kind of Data Memory Barrier. | |
It completes when all explicit memory accesses before this instruction complete. | |
*/ | |
#define __DSB() __builtin_arm_dsb(0xF); | |
/** | |
\brief Data Memory Barrier | |
\details Ensures the apparent order of the explicit memory operations before | |
and after the instruction, without ensuring their completion. | |
*/ | |
#define __DMB() __builtin_arm_dmb(0xF); | |
/** | |
\brief Reverse byte order (32 bit) | |
\details Reverses the byte order in integer value. | |
\param [in] value Value to reverse | |
\return Reversed value | |
*/ | |
#define __REV __builtin_bswap32 | |
/** | |
\brief Reverse byte order (16 bit) | |
\details Reverses the byte order in two unsigned short values. | |
\param [in] value Value to reverse | |
\return Reversed value | |
*/ | |
#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */ | |
#if 0 | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value) | |
{ | |
uint32_t result; | |
__ASM volatile("rev16 %0, %1" : __CMSIS_GCC_OUT_REG(result) : __CMSIS_GCC_USE_REG(value)); | |
return (result); | |
} | |
#endif | |
/** | |
\brief Reverse byte order in signed short value | |
\details Reverses the byte order in a signed short value with sign extension to integer. | |
\param [in] value Value to reverse | |
\return Reversed value | |
*/ | |
/* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */ | |
__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value) | |
{ | |
int32_t result; | |
__ASM volatile("revsh %0, %1" : __CMSIS_GCC_OUT_REG(result) : __CMSIS_GCC_USE_REG(value)); | |
return (result); | |
} | |
/** | |
\brief Rotate Right in unsigned value (32 bit) | |
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. | |
\param [in] op1 Value to rotate | |
\param [in] op2 Number of Bits to rotate | |
\return Rotated value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) | |
{ | |
return (op1 >> op2) | (op1 << (32U - op2)); | |
} | |
/** | |
\brief Breakpoint | |
\details Causes the processor to enter Debug state. | |
Debug tools can use this to investigate system state when the instruction at a particular address is reached. | |
\param [in] value is ignored by the processor. | |
If required, a debugger can use it to store additional information about the breakpoint. | |
*/ | |
#define __BKPT(value) __ASM volatile ("bkpt "#value) | |
/** | |
\brief Reverse bit order of value | |
\details Reverses the bit order of the given value. | |
\param [in] value Value to reverse | |
\return Reversed value | |
*/ | |
/* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) | |
{ | |
uint32_t result; | |
#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ | |
__ASM volatile("rbit %0, %1" : "=r"(result) : "r"(value)); | |
#else | |
int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */ | |
result = value; /* r will be reversed bits of v; first get LSB of v */ | |
for (value >>= 1U; value; value >>= 1U) | |
{ | |
result <<= 1U; | |
result |= value & 1U; | |
s--; | |
} | |
result <<= s; /* shift when v's highest bits are zero */ | |
#endif | |
return (result); | |
} | |
/** | |
\brief Count leading zeros | |
\details Counts the number of leading zeros of a data value. | |
\param [in] value Value to count the leading zeros | |
\return number of leading zeros in value | |
*/ | |
#define __CLZ __builtin_clz | |
#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ | |
/** | |
\brief LDR Exclusive (8 bit) | |
\details Executes a exclusive LDR instruction for 8 bit value. | |
\param [in] ptr Pointer to data | |
\return value of type uint8_t at (*ptr) | |
*/ | |
#define __LDREXB (uint8_t)__builtin_arm_ldrex | |
/** | |
\brief LDR Exclusive (16 bit) | |
\details Executes a exclusive LDR instruction for 16 bit values. | |
\param [in] ptr Pointer to data | |
\return value of type uint16_t at (*ptr) | |
*/ | |
#define __LDREXH (uint16_t)__builtin_arm_ldrex | |
/** | |
\brief LDR Exclusive (32 bit) | |
\details Executes a exclusive LDR instruction for 32 bit values. | |
\param [in] ptr Pointer to data | |
\return value of type uint32_t at (*ptr) | |
*/ | |
#define __LDREXW (uint32_t)__builtin_arm_ldrex | |
/** | |
\brief STR Exclusive (8 bit) | |
\details Executes a exclusive STR instruction for 8 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
\return 0 Function succeeded | |
\return 1 Function failed | |
*/ | |
#define __STREXB (uint32_t)__builtin_arm_strex | |
/** | |
\brief STR Exclusive (16 bit) | |
\details Executes a exclusive STR instruction for 16 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
\return 0 Function succeeded | |
\return 1 Function failed | |
*/ | |
#define __STREXH (uint32_t)__builtin_arm_strex | |
/** | |
\brief STR Exclusive (32 bit) | |
\details Executes a exclusive STR instruction for 32 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
\return 0 Function succeeded | |
\return 1 Function failed | |
*/ | |
#define __STREXW (uint32_t)__builtin_arm_strex | |
/** | |
\brief Remove the exclusive lock | |
\details Removes the exclusive lock which is created by LDREX. | |
*/ | |
#define __CLREX __builtin_arm_clrex | |
/** | |
\brief Signed Saturate | |
\details Saturates a signed value. | |
\param [in] value Value to be saturated | |
\param [in] sat Bit position to saturate to (1..32) | |
\return Saturated value | |
*/ | |
/*#define __SSAT __builtin_arm_ssat*/ | |
#define __SSAT(ARG1,ARG2) \ | |
({ \ | |
int32_t __RES, __ARG1 = (ARG1); \ | |
__ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ | |
__RES; \ | |
}) | |
/** | |
\brief Unsigned Saturate | |
\details Saturates an unsigned value. | |
\param [in] value Value to be saturated | |
\param [in] sat Bit position to saturate to (0..31) | |
\return Saturated value | |
*/ | |
#define __USAT __builtin_arm_usat | |
#if 0 | |
#define __USAT(ARG1,ARG2) \ | |
({ \ | |
uint32_t __RES, __ARG1 = (ARG1); \ | |
__ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ | |
__RES; \ | |
}) | |
#endif | |
/** | |
\brief Rotate Right with Extend (32 bit) | |
\details Moves each bit of a bitstring right by one bit. | |
The carry input is shifted in at the left end of the bitstring. | |
\param [in] value Value to rotate | |
\return Rotated value | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value) | |
{ | |
uint32_t result; | |
__ASM volatile("rrx %0, %1" : __CMSIS_GCC_OUT_REG(result) : __CMSIS_GCC_USE_REG(value)); | |
return (result); | |
} | |
/** | |
\brief LDRT Unprivileged (8 bit) | |
\details Executes a Unprivileged LDRT instruction for 8 bit value. | |
\param [in] ptr Pointer to data | |
\return value of type uint8_t at (*ptr) | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr) | |
{ | |
uint32_t result; | |
__ASM volatile("ldrbt %0, %1" : "=r"(result) : "Q"(*ptr)); | |
return ((uint8_t) result); /* Add explicit type cast here */ | |
} | |
/** | |
\brief LDRT Unprivileged (16 bit) | |
\details Executes a Unprivileged LDRT instruction for 16 bit values. | |
\param [in] ptr Pointer to data | |
\return value of type uint16_t at (*ptr) | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr) | |
{ | |
uint32_t result; | |
__ASM volatile("ldrht %0, %1" : "=r"(result) : "Q"(*ptr)); | |
return ((uint16_t) result); /* Add explicit type cast here */ | |
} | |
/** | |
\brief LDRT Unprivileged (32 bit) | |
\details Executes a Unprivileged LDRT instruction for 32 bit values. | |
\param [in] ptr Pointer to data | |
\return value of type uint32_t at (*ptr) | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr) | |
{ | |
uint32_t result; | |
__ASM volatile("ldrt %0, %1" : "=r"(result) : "Q"(*ptr)); | |
return (result); | |
} | |
/** | |
\brief STRT Unprivileged (8 bit) | |
\details Executes a Unprivileged STRT instruction for 8 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) | |
{ | |
__ASM volatile("strbt %1, %0" : "=Q"(*ptr) : "r"((uint32_t)value)); | |
} | |
/** | |
\brief STRT Unprivileged (16 bit) | |
\details Executes a Unprivileged STRT instruction for 16 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) | |
{ | |
__ASM volatile("strht %1, %0" : "=Q"(*ptr) : "r"((uint32_t)value)); | |
} | |
/** | |
\brief STRT Unprivileged (32 bit) | |
\details Executes a Unprivileged STRT instruction for 32 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr) | |
{ | |
__ASM volatile("strt %1, %0" : "=Q"(*ptr) : "r"(value)); | |
} | |
#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ | |
#if (__ARM_ARCH_8M__ == 1U) | |
/** | |
\brief Load-Acquire (8 bit) | |
\details Executes a LDAB instruction for 8 bit value. | |
\param [in] ptr Pointer to data | |
\return value of type uint8_t at (*ptr) | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr) | |
{ | |
uint32_t result; | |
__ASM volatile("ldab %0, %1" : "=r"(result) : "Q"(*ptr)); | |
return ((uint8_t) result); | |
} | |
/** | |
\brief Load-Acquire (16 bit) | |
\details Executes a LDAH instruction for 16 bit values. | |
\param [in] ptr Pointer to data | |
\return value of type uint16_t at (*ptr) | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr) | |
{ | |
uint32_t result; | |
__ASM volatile("ldah %0, %1" : "=r"(result) : "Q"(*ptr)); | |
return ((uint16_t) result); | |
} | |
/** | |
\brief Load-Acquire (32 bit) | |
\details Executes a LDA instruction for 32 bit values. | |
\param [in] ptr Pointer to data | |
\return value of type uint32_t at (*ptr) | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr) | |
{ | |
uint32_t result; | |
__ASM volatile("lda %0, %1" : "=r"(result) : "Q"(*ptr)); | |
return (result); | |
} | |
/** | |
\brief Store-Release (8 bit) | |
\details Executes a STLB instruction for 8 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr) | |
{ | |
__ASM volatile("stlb %1, %0" : "=Q"(*ptr) : "r"((uint32_t)value)); | |
} | |
/** | |
\brief Store-Release (16 bit) | |
\details Executes a STLH instruction for 16 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr) | |
{ | |
__ASM volatile("stlh %1, %0" : "=Q"(*ptr) : "r"((uint32_t)value)); | |
} | |
/** | |
\brief Store-Release (32 bit) | |
\details Executes a STL instruction for 32 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
*/ | |
__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr) | |
{ | |
__ASM volatile("stl %1, %0" : "=Q"(*ptr) : "r"((uint32_t)value)); | |
} | |
/** | |
\brief Load-Acquire Exclusive (8 bit) | |
\details Executes a LDAB exclusive instruction for 8 bit value. | |
\param [in] ptr Pointer to data | |
\return value of type uint8_t at (*ptr) | |
*/ | |
#define __LDAEXB (uint8_t)__builtin_arm_ldaex | |
/** | |
\brief Load-Acquire Exclusive (16 bit) | |
\details Executes a LDAH exclusive instruction for 16 bit values. | |
\param [in] ptr Pointer to data | |
\return value of type uint16_t at (*ptr) | |
*/ | |
#define __LDAEXH (uint16_t)__builtin_arm_ldaex | |
/** | |
\brief Load-Acquire Exclusive (32 bit) | |
\details Executes a LDA exclusive instruction for 32 bit values. | |
\param [in] ptr Pointer to data | |
\return value of type uint32_t at (*ptr) | |
*/ | |
#define __LDAEX (uint32_t)__builtin_arm_ldaex | |
/** | |
\brief Store-Release Exclusive (8 bit) | |
\details Executes a STLB exclusive instruction for 8 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
\return 0 Function succeeded | |
\return 1 Function failed | |
*/ | |
#define __STLEXB (uint32_t)__builtin_arm_stlex | |
/** | |
\brief Store-Release Exclusive (16 bit) | |
\details Executes a STLH exclusive instruction for 16 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
\return 0 Function succeeded | |
\return 1 Function failed | |
*/ | |
#define __STLEXH (uint32_t)__builtin_arm_stlex | |
/** | |
\brief Store-Release Exclusive (32 bit) | |
\details Executes a STL exclusive instruction for 32 bit values. | |
\param [in] value Value to store | |
\param [in] ptr Pointer to location | |
\return 0 Function succeeded | |
\return 1 Function failed | |
*/ | |
#define __STLEX (uint32_t)__builtin_arm_stlex | |
#endif /* (__ARM_ARCH_8M__ == 1U) */ | |
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ | |
/* ################### Compiler specific Intrinsics ########################### */ | |
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics | |
Access to dedicated SIMD instructions | |
@{ | |
*/ | |
#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */ | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("sadd8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("qadd8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("shadd8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uadd8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uqadd8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uhadd8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("ssub8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("qsub8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("shsub8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("usub8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uqsub8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uhsub8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("sadd16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("qadd16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("shadd16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uadd16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uqadd16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uhadd16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("ssub16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("qsub16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("shsub16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("usub16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uqsub16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uhsub16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("sasx %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("qasx %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("shasx %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uasx %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uqasx %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uhasx %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("ssax %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("qsax %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("shsax %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("usax %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uqsax %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uhsax %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("usad8 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) | |
{ | |
uint32_t result; | |
__ASM volatile("usada8 %0, %1, %2, %3" : "=r"(result) : "r"(op1), "r"(op2), "r"(op3)); | |
return (result); | |
} | |
#define __SSAT16(ARG1,ARG2) \ | |
({ \ | |
uint32_t __RES, __ARG1 = (ARG1); \ | |
__ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ | |
__RES; \ | |
}) | |
#define __USAT16(ARG1,ARG2) \ | |
({ \ | |
uint32_t __RES, __ARG1 = (ARG1); \ | |
__ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ | |
__RES; \ | |
}) | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1) | |
{ | |
uint32_t result; | |
__ASM volatile("uxtb16 %0, %1" : "=r"(result) : "r"(op1)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("uxtab16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1) | |
{ | |
uint32_t result; | |
__ASM volatile("sxtb16 %0, %1" : "=r"(result) : "r"(op1)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("sxtab16 %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("smuad %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("smuadx %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD(uint32_t op1, uint32_t op2, uint32_t op3) | |
{ | |
uint32_t result; | |
__ASM volatile("smlad %0, %1, %2, %3" : "=r"(result) : "r"(op1), "r"(op2), "r"(op3)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX(uint32_t op1, uint32_t op2, uint32_t op3) | |
{ | |
uint32_t result; | |
__ASM volatile("smladx %0, %1, %2, %3" : "=r"(result) : "r"(op1), "r"(op2), "r"(op3)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD(uint32_t op1, uint32_t op2, uint64_t acc) | |
{ | |
union llreg_u | |
{ | |
uint32_t w32[2]; | |
uint64_t w64; | |
} llr; | |
llr.w64 = acc; | |
#ifndef __ARMEB__ /* Little endian */ | |
__ASM volatile("smlald %0, %1, %2, %3" : "=r"(llr.w32[0]), "=r"(llr.w32[1]): "r"(op1), "r"(op2) , "0"(llr.w32[0]), | |
"1"(llr.w32[1])); | |
#else /* Big endian */ | |
__ASM volatile("smlald %0, %1, %2, %3" : "=r"(llr.w32[1]), "=r"(llr.w32[0]): "r"(op1), "r"(op2) , "0"(llr.w32[1]), | |
"1"(llr.w32[0])); | |
#endif | |
return (llr.w64); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX(uint32_t op1, uint32_t op2, uint64_t acc) | |
{ | |
union llreg_u | |
{ | |
uint32_t w32[2]; | |
uint64_t w64; | |
} llr; | |
llr.w64 = acc; | |
#ifndef __ARMEB__ /* Little endian */ | |
__ASM volatile("smlaldx %0, %1, %2, %3" : "=r"(llr.w32[0]), "=r"(llr.w32[1]): "r"(op1), "r"(op2) , "0"(llr.w32[0]), | |
"1"(llr.w32[1])); | |
#else /* Big endian */ | |
__ASM volatile("smlaldx %0, %1, %2, %3" : "=r"(llr.w32[1]), "=r"(llr.w32[0]): "r"(op1), "r"(op2) , "0"(llr.w32[1]), | |
"1"(llr.w32[0])); | |
#endif | |
return (llr.w64); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("smusd %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("smusdx %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD(uint32_t op1, uint32_t op2, uint32_t op3) | |
{ | |
uint32_t result; | |
__ASM volatile("smlsd %0, %1, %2, %3" : "=r"(result) : "r"(op1), "r"(op2), "r"(op3)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX(uint32_t op1, uint32_t op2, uint32_t op3) | |
{ | |
uint32_t result; | |
__ASM volatile("smlsdx %0, %1, %2, %3" : "=r"(result) : "r"(op1), "r"(op2), "r"(op3)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD(uint32_t op1, uint32_t op2, uint64_t acc) | |
{ | |
union llreg_u | |
{ | |
uint32_t w32[2]; | |
uint64_t w64; | |
} llr; | |
llr.w64 = acc; | |
#ifndef __ARMEB__ /* Little endian */ | |
__ASM volatile("smlsld %0, %1, %2, %3" : "=r"(llr.w32[0]), "=r"(llr.w32[1]): "r"(op1), "r"(op2) , "0"(llr.w32[0]), | |
"1"(llr.w32[1])); | |
#else /* Big endian */ | |
__ASM volatile("smlsld %0, %1, %2, %3" : "=r"(llr.w32[1]), "=r"(llr.w32[0]): "r"(op1), "r"(op2) , "0"(llr.w32[1]), | |
"1"(llr.w32[0])); | |
#endif | |
return (llr.w64); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX(uint32_t op1, uint32_t op2, uint64_t acc) | |
{ | |
union llreg_u | |
{ | |
uint32_t w32[2]; | |
uint64_t w64; | |
} llr; | |
llr.w64 = acc; | |
#ifndef __ARMEB__ /* Little endian */ | |
__ASM volatile("smlsldx %0, %1, %2, %3" : "=r"(llr.w32[0]), "=r"(llr.w32[1]): "r"(op1), "r"(op2) , "0"(llr.w32[0]), | |
"1"(llr.w32[1])); | |
#else /* Big endian */ | |
__ASM volatile("smlsldx %0, %1, %2, %3" : "=r"(llr.w32[1]), "=r"(llr.w32[0]): "r"(op1), "r"(op2) , "0"(llr.w32[1]), | |
"1"(llr.w32[0])); | |
#endif | |
return (llr.w64); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL(uint32_t op1, uint32_t op2) | |
{ | |
uint32_t result; | |
__ASM volatile("sel %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD(int32_t op1, int32_t op2) | |
{ | |
int32_t result; | |
__ASM volatile("qadd %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB(int32_t op1, int32_t op2) | |
{ | |
int32_t result; | |
__ASM volatile("qsub %0, %1, %2" : "=r"(result) : "r"(op1), "r"(op2)); | |
return (result); | |
} | |
#define __PKHBT(ARG1,ARG2,ARG3) \ | |
({ \ | |
uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ | |
__ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ | |
__RES; \ | |
}) | |
#define __PKHTB(ARG1,ARG2,ARG3) \ | |
({ \ | |
uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ | |
if (ARG3 == 0) \ | |
__ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ | |
else \ | |
__ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ | |
__RES; \ | |
}) | |
__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA(int32_t op1, int32_t op2, int32_t op3) | |
{ | |
int32_t result; | |
__ASM volatile("smmla %0, %1, %2, %3" : "=r"(result): "r"(op1), "r"(op2), "r"(op3)); | |
return (result); | |
} | |
#endif /* (__ARM_FEATURE_DSP == 1U) */ | |
/*@} end of group CMSIS_SIMD_intrinsics */ | |
#endif /* __CMSIS_ARMCC_V6_H */ |