/*
 * Copyright (c) Nordic Semiconductor ASA
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 *   1. Redistributions of source code must retain the above copyright notice, this
 *   list of conditions and the following disclaimer.
 *
 *   2. Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
 *   contributors to this software may be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 *   4. This software must only be used in a processor manufactured by Nordic
 *   Semiconductor ASA, or in a processor manufactured by a third party that
 *   is used in combination with a processor manufactured by Nordic Semiconductor.
 *
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

/**
  @addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client
  @{
  @brief  Definitions and prototypes for the GATT Client interface.
 */

#ifndef BLE_GATTC_H__
#define BLE_GATTC_H__

#include "ble_gatt.h"
#include "ble_types.h"
#include "ble_ranges.h"
#include "nrf_svc.h"
#include "nrf_error.h"
#include "nrf.h"

#ifdef __cplusplus
extern "C" {
#endif

/** @addtogroup BLE_GATTC_ENUMERATIONS Enumerations
 * @{ */

/**@brief GATTC API SVC numbers. */
enum BLE_GATTC_SVCS
{
  SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */
  SD_BLE_GATTC_RELATIONSHIPS_DISCOVER,                         /**< Relationship Discovery. */
  SD_BLE_GATTC_CHARACTERISTICS_DISCOVER,                       /**< Characteristic Discovery. */
  SD_BLE_GATTC_DESCRIPTORS_DISCOVER,                           /**< Characteristic Descriptor Discovery. */
  SD_BLE_GATTC_ATTR_INFO_DISCOVER,                             /**< Attribute Information Discovery. */
  SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ,                        /**< Read Characteristic Value by UUID. */
  SD_BLE_GATTC_READ,                                           /**< Generic read. */
  SD_BLE_GATTC_CHAR_VALUES_READ,                               /**< Read multiple Characteristic Values. */
  SD_BLE_GATTC_WRITE,                                          /**< Generic write. */
  SD_BLE_GATTC_HV_CONFIRM,                                     /**< Handle Value Confirmation. */
  SD_BLE_GATTC_EXCHANGE_MTU_REQUEST,                           /**< Exchange MTU Request. */
};

/**
 * @brief GATT Client Event IDs.
 */
enum BLE_GATTC_EVTS
{
  BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE,  /**< Primary Service Discovery Response event.          \n See @ref ble_gattc_evt_prim_srvc_disc_rsp_t.          */
  BLE_GATTC_EVT_REL_DISC_RSP,                             /**< Relationship Discovery Response event.             \n See @ref ble_gattc_evt_rel_disc_rsp_t.                */
  BLE_GATTC_EVT_CHAR_DISC_RSP,                            /**< Characteristic Discovery Response event.           \n See @ref ble_gattc_evt_char_disc_rsp_t.               */
  BLE_GATTC_EVT_DESC_DISC_RSP,                            /**< Descriptor Discovery Response event.               \n See @ref ble_gattc_evt_desc_disc_rsp_t.               */
  BLE_GATTC_EVT_ATTR_INFO_DISC_RSP,                       /**< Attribute Information Response event.              \n See @ref ble_gattc_evt_attr_info_disc_rsp_t. */
  BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP,                /**< Read By UUID Response event.                       \n See @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t.   */
  BLE_GATTC_EVT_READ_RSP,                                 /**< Read Response event.                               \n See @ref ble_gattc_evt_read_rsp_t.                    */
  BLE_GATTC_EVT_CHAR_VALS_READ_RSP,                       /**< Read multiple Response event.                      \n See @ref ble_gattc_evt_char_vals_read_rsp_t.          */
  BLE_GATTC_EVT_WRITE_RSP,                                /**< Write Response event.                              \n See @ref ble_gattc_evt_write_rsp_t.                   */
  BLE_GATTC_EVT_HVX,                                      /**< Handle Value Notification or Indication event.     \n Confirm indication with @ref sd_ble_gattc_hv_confirm.  \n See @ref ble_gattc_evt_hvx_t. */
  BLE_GATTC_EVT_EXCHANGE_MTU_RSP,                         /**< Exchange MTU Response event.                       \n See @ref ble_gattc_evt_exchange_mtu_rsp_t.            */
  BLE_GATTC_EVT_TIMEOUT,                                  /**< Timeout event.                                     \n See @ref ble_gattc_evt_timeout_t.                     */
  BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE                     /**< Write without Response transmission complete.      \n See @ref ble_gattc_evt_write_cmd_tx_complete_t.       */
};

/** @} */

/** @addtogroup BLE_GATTC_DEFINES Defines
 * @{ */

/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC
 * @{ */
#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED    (NRF_GATTC_ERR_BASE + 0x000) /**< Procedure not Permitted. */
/** @} */

/** @defgroup BLE_GATTC_ATTR_INFO_FORMAT Attribute Information Formats
 * @{ */
#define BLE_GATTC_ATTR_INFO_FORMAT_16BIT    1 /**< 16-bit Attribute Information Format. */
#define BLE_GATTC_ATTR_INFO_FORMAT_128BIT   2 /**< 128-bit Attribute Information Format. */
/** @} */

/** @defgroup BLE_GATTC_DEFAULTS GATT Client defaults
 * @{ */
#define BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT  1 /**< Default number of Write without Response that can be queued for transmission. */
/** @} */

/** @} */

/** @addtogroup BLE_GATTC_STRUCTURES Structures
 * @{ */

/**
 * @brief BLE GATTC connection configuration parameters, set with @ref sd_ble_cfg_set.
 */
typedef struct
{
  uint8_t  write_cmd_tx_queue_size; /**< The guaranteed minimum number of Write without Response that can be queued for transmission.
                                          The default value is @ref BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT */
} ble_gattc_conn_cfg_t;

/**@brief Operation Handle Range. */
typedef struct
{
  uint16_t          start_handle; /**< Start Handle. */
  uint16_t          end_handle;   /**< End Handle. */
} ble_gattc_handle_range_t;


/**@brief GATT service. */
typedef struct
{
  ble_uuid_t               uuid;          /**< Service UUID. */
  ble_gattc_handle_range_t handle_range;  /**< Service Handle Range. */
} ble_gattc_service_t;


/**@brief  GATT include. */
typedef struct
{
  uint16_t            handle;           /**< Include Handle. */
  ble_gattc_service_t included_srvc;    /**< Handle of the included service. */
} ble_gattc_include_t;


/**@brief GATT characteristic. */
typedef struct
{
  ble_uuid_t              uuid;                 /**< Characteristic UUID. */
  ble_gatt_char_props_t   char_props;           /**< Characteristic Properties. */
  uint8_t                 char_ext_props : 1;   /**< Extended properties present. */
  uint16_t                handle_decl;          /**< Handle of the Characteristic Declaration. */
  uint16_t                handle_value;         /**< Handle of the Characteristic Value. */
} ble_gattc_char_t;


/**@brief GATT descriptor. */
typedef struct
{
  uint16_t          handle;         /**< Descriptor Handle. */
  ble_uuid_t        uuid;           /**< Descriptor UUID. */
} ble_gattc_desc_t;


/**@brief Write Parameters. */
typedef struct
{
  uint8_t        write_op;             /**< Write Operation to be performed, see @ref BLE_GATT_WRITE_OPS. */
  uint8_t        flags;                /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */
  uint16_t       handle;               /**< Handle to the attribute to be written. */
  uint16_t       offset;               /**< Offset in bytes. @note For WRITE_CMD and WRITE_REQ, offset must be 0. */
  uint16_t       len;                  /**< Length of data in bytes. */
  uint8_t const *p_value;              /**< Pointer to the value data. */
} ble_gattc_write_params_t;

/**@brief Attribute Information for 16-bit Attribute UUID. */
typedef struct
{
  uint16_t       handle;               /**< Attribute handle. */
  ble_uuid_t     uuid;                 /**< 16-bit Attribute UUID. */
} ble_gattc_attr_info16_t;

/**@brief Attribute Information for 128-bit Attribute UUID. */
typedef struct
{
  uint16_t       handle;               /**< Attribute handle. */
  ble_uuid128_t  uuid;                 /**< 128-bit Attribute UUID. */
} ble_gattc_attr_info128_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */
typedef struct
{
  uint16_t             count;           /**< Service count. */
  ble_gattc_service_t services[1];      /**< Service data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                             See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_prim_srvc_disc_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_REL_DISC_RSP. */
typedef struct
{
  uint16_t             count;           /**< Include count. */
  ble_gattc_include_t includes[1];      /**< Include data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                             See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_rel_disc_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_DISC_RSP. */
typedef struct
{
  uint16_t            count;          /**< Characteristic count. */
  ble_gattc_char_t    chars[1];       /**< Characteristic data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                           See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_char_disc_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_DESC_DISC_RSP. */
typedef struct
{
  uint16_t            count;          /**< Descriptor count. */
  ble_gattc_desc_t    descs[1];       /**< Descriptor data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                           See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_desc_disc_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP. */
typedef struct
{
  uint16_t                     count;            /**< Attribute count. */
  uint8_t                      format;           /**< Attribute information format, see @ref BLE_GATTC_ATTR_INFO_FORMAT. */
  union {
    ble_gattc_attr_info16_t  attr_info16[1];     /**< Attribute information for 16-bit Attribute UUID.
                                                      @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                                      See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
    ble_gattc_attr_info128_t attr_info128[1];    /**< Attribute information for 128-bit Attribute UUID.
                                                      @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                                      See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
  } info;                                        /**< Attribute information union. */
} ble_gattc_evt_attr_info_disc_rsp_t;

/**@brief GATT read by UUID handle value pair. */
typedef struct
{
  uint16_t            handle;          /**< Attribute Handle. */
  uint8_t            *p_value;         /**< Pointer to the Attribute Value, length is available in @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t::value_len. */
} ble_gattc_handle_value_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */
typedef struct
{
  uint16_t                  count;            /**< Handle-Value Pair Count. */
  uint16_t                  value_len;        /**< Length of the value in Handle-Value(s) list. */
  uint8_t                   handle_value[1];  /**< Handle-Value(s) list. To iterate through the list use @ref sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter.
                                                   @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                                   See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_char_val_by_uuid_read_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_READ_RSP. */
typedef struct
{
  uint16_t            handle;         /**< Attribute Handle. */
  uint16_t            offset;         /**< Offset of the attribute data. */
  uint16_t            len;            /**< Attribute data length. */
  uint8_t             data[1];        /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                           See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_read_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */
typedef struct
{
  uint16_t            len;            /**< Concatenated Attribute values length. */
  uint8_t             values[1];      /**< Attribute values. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                           See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_char_vals_read_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_RSP. */
typedef struct
{
  uint16_t            handle;           /**< Attribute Handle. */
  uint8_t             write_op;         /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */
  uint16_t            offset;           /**< Data offset. */
  uint16_t            len;              /**< Data length. */
  uint8_t             data[1];          /**< Data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                             See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_write_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_HVX. */
typedef struct
{
  uint16_t            handle;         /**< Handle to which the HVx operation applies. */
  uint8_t             type;           /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
  uint16_t            len;            /**< Attribute data length. */
  uint8_t             data[1];        /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
                                           See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
} ble_gattc_evt_hvx_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. */
typedef struct
{
  uint16_t          server_rx_mtu;            /**< Server RX MTU size. */
} ble_gattc_evt_exchange_mtu_rsp_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_TIMEOUT. */
typedef struct
{
  uint8_t          src;                       /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
} ble_gattc_evt_timeout_t;

/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE. */
typedef struct
{
  uint8_t             count;            /**< Number of write without response transmissions completed. */
} ble_gattc_evt_write_cmd_tx_complete_t;

/**@brief GATTC event structure. */
typedef struct
{
  uint16_t            conn_handle;                /**< Connection Handle on which event occurred. */
  uint16_t            gatt_status;                /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
  uint16_t            error_handle;               /**< In case of error: The handle causing the error. In all other cases @ref BLE_GATT_HANDLE_INVALID. */
  union
  {
    ble_gattc_evt_prim_srvc_disc_rsp_t          prim_srvc_disc_rsp;         /**< Primary Service Discovery Response Event Parameters. */
    ble_gattc_evt_rel_disc_rsp_t                rel_disc_rsp;               /**< Relationship Discovery Response Event Parameters. */
    ble_gattc_evt_char_disc_rsp_t               char_disc_rsp;              /**< Characteristic Discovery Response Event Parameters. */
    ble_gattc_evt_desc_disc_rsp_t               desc_disc_rsp;              /**< Descriptor Discovery Response Event Parameters. */
    ble_gattc_evt_char_val_by_uuid_read_rsp_t   char_val_by_uuid_read_rsp;  /**< Characteristic Value Read by UUID Response Event Parameters. */
    ble_gattc_evt_read_rsp_t                    read_rsp;                   /**< Read Response Event Parameters. */
    ble_gattc_evt_char_vals_read_rsp_t          char_vals_read_rsp;         /**< Characteristic Values Read Response Event Parameters. */
    ble_gattc_evt_write_rsp_t                   write_rsp;                  /**< Write Response Event Parameters. */
    ble_gattc_evt_hvx_t                         hvx;                        /**< Handle Value Notification/Indication Event Parameters. */
    ble_gattc_evt_exchange_mtu_rsp_t            exchange_mtu_rsp;           /**< Exchange MTU Response Event Parameters. */
    ble_gattc_evt_timeout_t                     timeout;                    /**< Timeout Event Parameters. */
    ble_gattc_evt_attr_info_disc_rsp_t          attr_info_disc_rsp;         /**< Attribute Information Discovery Event Parameters. */
    ble_gattc_evt_write_cmd_tx_complete_t       write_cmd_tx_complete;      /**< Write without Response transmission complete Event Parameters. */
  } params;                                                                 /**< Event Parameters. @note Only valid if @ref gatt_status == @ref BLE_GATT_STATUS_SUCCESS. */
} ble_gattc_evt_t;
/** @} */

/** @addtogroup BLE_GATTC_FUNCTIONS Functions
 * @{ */

/**@brief Initiate or continue a GATT Primary Service Discovery procedure.
 *
 * @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle.
 *          If the last service has not been reached, this function must be called again with an updated start handle value to continue the search.
 *
 * @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
 *       type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] start_handle Handle to start searching from.
 * @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *p_srvc_uuid));


/**@brief Initiate or continue a GATT Relationship Discovery procedure.
 *
 * @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached,
 *          this must be called again with an updated handle range to continue the search.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_REL_DISC_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_REL_DISC_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));


/**@brief Initiate or continue a GATT Characteristic Discovery procedure.
 *
 * @details This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been reached,
 *          this must be called again with an updated handle range to continue the discovery.
 *
 * @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
 *       type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_CHAR_DISC_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_CHAR_DISC_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t, sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));


/**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure.
 *
 * @details This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached,
 *          this must be called again with an updated handle range to continue the discovery.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_DESC_DISC_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_DESC_DISC_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t, sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));


/**@brief Initiate or continue a GATT Read using Characteristic UUID procedure.
 *
 * @details This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been reached,
 *          this must be called again with an updated handle range to continue the discovery.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_READ_UUID_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_uuid Pointer to a Characteristic value UUID to read.
 * @param[in] p_handle_range A pointer to the range of handles to perform this procedure on.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t, sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const *p_uuid, ble_gattc_handle_range_t const *p_handle_range));


/**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure.
 *
 * @details This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor
 *          to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read the
 *          complete value.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_READ_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_VALUE_READ_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] handle The handle of the attribute to be read.
 * @param[in] offset Offset into the attribute value to be read.
 *
 * @retval ::NRF_SUCCESS Successfully started or resumed the Read (Long) procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset));


/**@brief Initiate a GATT Read Multiple Characteristic Values procedure.
 *
 * @details This function initiates a GATT Read Multiple Characteristic Values procedure.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_READ_MULT_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read.
 * @param[in] handle_count The number of handles in p_handles.
 *
 * @retval ::NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t, sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const *p_handles, uint16_t handle_count));


/**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure.
 *
 * @details This function can perform all write procedures described in GATT.
 *
 * @note    Only one write with response procedure can be ongoing per connection at a time.
 *          If the application tries to write with response while another write with response procedure is ongoing,
 *          the function call will return @ref NRF_ERROR_BUSY.
 *          A @ref BLE_GATTC_EVT_WRITE_RSP event will be issued as soon as the write response arrives from the peer.
 *
 * @note    The number of Write without Response that can be queued is configured by @ref ble_gattc_conn_cfg_t::write_cmd_tx_queue_size
 *          When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES.
 *          A @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event will be issued as soon as the transmission of the write without response is complete.
 *
 * @note    The application can keep track of the available queue element count for writes without responses by following the procedure below:
 *          - Store initial queue element count in a variable.
 *          - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS.
 *          - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE, Write without response transmission complete.}
 * @event{@ref BLE_GATTC_EVT_WRITE_RSP, Write response received from the peer.}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_VALUE_WRITE_WITHOUT_RESP_MSC}
 * @mmsc{@ref BLE_GATTC_VALUE_WRITE_MSC}
 * @mmsc{@ref BLE_GATTC_VALUE_LONG_WRITE_MSC}
 * @mmsc{@ref BLE_GATTC_VALUE_RELIABLE_WRITE_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_write_params A pointer to a write parameters structure.
 *
 * @retval ::NRF_SUCCESS Successfully started the Write procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
 * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
 * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
 * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
 * @retval ::NRF_ERROR_BUSY For write with response, procedure already in progress. Wait for a @ref BLE_GATTC_EVT_WRITE_RSP event and retry.
 * @retval ::NRF_ERROR_RESOURCES Too many writes without responses queued.
 *                               Wait for a @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event and retry.
 */
SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const *p_write_params));


/**@brief Send a Handle Value Confirmation to the GATT Server.
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_HVI_MSC}
 * @endmscs
 *
 * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
 * @param[in] handle The handle of the attribute in the indication.
 *
 * @retval ::NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no Indication pending to be confirmed.
 * @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle.
 */
SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle));

/**@brief Discovers information about a range of attributes on a GATT server.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, Generated when information about a range of attributes has been received.}
 * @endevents
 *
 * @param[in] conn_handle    The connection handle identifying the connection to perform this procedure on.
 * @param[in] p_handle_range The range of handles to request information about.
 *
 * @retval ::NRF_SUCCESS Successfully started an attribute information discovery procedure.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state
 * @retval ::NRF_ERROR_INVALID_ADDR  Invalid pointer supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_ATTR_INFO_DISCOVER, uint32_t, sd_ble_gattc_attr_info_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * p_handle_range));

/**@brief Start an ATT_MTU exchange by sending an Exchange MTU Request to the server.
 *
 * @details The SoftDevice sets ATT_MTU to the minimum of:
 *          - The Client RX MTU value, and
 *          - The Server RX MTU value from @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP.
 *
 *          However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT.
 *
 * @events
 * @event{@ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP}
 * @endevents
 *
 * @mscs
 * @mmsc{@ref BLE_GATTC_MTU_EXCHANGE}
 * @endmscs
 *
 * @param[in] conn_handle    The connection handle identifying the connection to perform this procedure on.
 * @param[in] client_rx_mtu  Client RX MTU size.
 *                           - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT.
 *                           - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration
                               used for this connection.
 *                           - The value must be equal to Server RX MTU size given in @ref sd_ble_gatts_exchange_mtu_reply
 *                             if an ATT_MTU exchange has already been performed in the other direction.
 *
 * @retval ::NRF_SUCCESS Successfully sent request to the server.
 * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle.
 * @retval ::NRF_ERROR_INVALID_STATE Invalid connection state or an ATT_MTU exchange was already requested once.
 * @retval ::NRF_ERROR_INVALID_PARAM Invalid Client RX MTU size supplied.
 * @retval ::NRF_ERROR_BUSY Client procedure already in progress.
 */
SVCALL(SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, uint32_t, sd_ble_gattc_exchange_mtu_request(uint16_t conn_handle, uint16_t client_rx_mtu));

/**@brief Iterate through Handle-Value(s) list in @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event.
 *
 * @param[in] p_gattc_evt  Pointer to event buffer containing @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event.
 *                         @note If the buffer contains different event, behavior is undefined.
 * @param[in,out] p_iter   Iterator, points to @ref ble_gattc_handle_value_t structure that will be filled in with
 *                         the next Handle-Value pair in each iteration. If the function returns other than
 *                         @ref NRF_SUCCESS, it will not be changed.
 *                         - To start iteration, initialize the structure to zero.
 *                         - To continue, pass the value from previous iteration.
 *
 * \code
 * ble_gattc_handle_value_t iter;
 * memset(&iter, 0, sizeof(ble_gattc_handle_value_t));
 * while (sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(&ble_evt.evt.gattc_evt, &iter) == NRF_SUCCESS)
 * {
 *   app_handle = iter.handle;
 *   memcpy(app_value, iter.p_value, ble_evt.evt.gattc_evt.params.char_val_by_uuid_read_rsp.value_len);
 * }
 * \endcode
 *
 * @retval ::NRF_SUCCESS Successfully retrieved the next Handle-Value pair.
 * @retval ::NRF_ERROR_NOT_FOUND No more Handle-Value pairs available in the list.
 */
__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter);

/** @} */

#ifndef SUPPRESS_INLINE_IMPLEMENTATION

__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter)
{
  uint32_t value_len = p_gattc_evt->params.char_val_by_uuid_read_rsp.value_len;
  uint8_t *p_first = p_gattc_evt->params.char_val_by_uuid_read_rsp.handle_value;
  uint8_t *p_next = p_iter->p_value ? p_iter->p_value + value_len : p_first;

  if ((p_next - p_first) / (sizeof(uint16_t) + value_len) < p_gattc_evt->params.char_val_by_uuid_read_rsp.count)
  {
    p_iter->handle = (uint16_t)p_next[1] << 8 | p_next[0];
    p_iter->p_value = p_next + sizeof(uint16_t);
    return NRF_SUCCESS;
  }
  else
  {
    return NRF_ERROR_NOT_FOUND;
  }
}

#endif /* SUPPRESS_INLINE_IMPLEMENTATION */

#ifdef __cplusplus
}
#endif
#endif /* BLE_GATTC_H__ */

/**
  @}
*/