| /** |
| * \file x509_crt.h |
| * |
| * \brief X.509 certificate parsing and writing |
| * |
| * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| * This file is part of mbed TLS (https://tls.mbed.org) |
| */ |
| #ifndef MBEDTLS_X509_CRT_H |
| #define MBEDTLS_X509_CRT_H |
| |
| #if !defined(MBEDTLS_CONFIG_FILE) |
| #include "config.h" |
| #else |
| #include MBEDTLS_CONFIG_FILE |
| #endif |
| |
| #include "x509.h" |
| #include "x509_crl.h" |
| |
| /** |
| * \addtogroup x509_module |
| * \{ |
| */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * \name Structures and functions for parsing and writing X.509 certificates |
| * \{ |
| */ |
| |
| /** |
| * Container for an X.509 certificate. The certificate may be chained. |
| */ |
| typedef struct mbedtls_x509_crt |
| { |
| mbedtls_x509_buf raw; /**< The raw certificate data (DER). */ |
| mbedtls_x509_buf tbs; /**< The raw certificate body (DER). The part that is To Be Signed. */ |
| |
| int version; /**< The X.509 version. (1=v1, 2=v2, 3=v3) */ |
| mbedtls_x509_buf serial; /**< Unique id for certificate issued by a specific CA. */ |
| mbedtls_x509_buf sig_oid; /**< Signature algorithm, e.g. sha1RSA */ |
| |
| mbedtls_x509_buf issuer_raw; /**< The raw issuer data (DER). Used for quick comparison. */ |
| mbedtls_x509_buf subject_raw; /**< The raw subject data (DER). Used for quick comparison. */ |
| |
| mbedtls_x509_name issuer; /**< The parsed issuer data (named information object). */ |
| mbedtls_x509_name subject; /**< The parsed subject data (named information object). */ |
| |
| mbedtls_x509_time valid_from; /**< Start time of certificate validity. */ |
| mbedtls_x509_time valid_to; /**< End time of certificate validity. */ |
| |
| mbedtls_pk_context pk; /**< Container for the public key context. */ |
| |
| mbedtls_x509_buf issuer_id; /**< Optional X.509 v2/v3 issuer unique identifier. */ |
| mbedtls_x509_buf subject_id; /**< Optional X.509 v2/v3 subject unique identifier. */ |
| mbedtls_x509_buf v3_ext; /**< Optional X.509 v3 extensions. */ |
| mbedtls_x509_sequence subject_alt_names; /**< Optional list of Subject Alternative Names (Only dNSName supported). */ |
| |
| int ext_types; /**< Bit string containing detected and parsed extensions */ |
| int ca_istrue; /**< Optional Basic Constraint extension value: 1 if this certificate belongs to a CA, 0 otherwise. */ |
| int max_pathlen; /**< Optional Basic Constraint extension value: The maximum path length to the root certificate. Path length is 1 higher than RFC 5280 'meaning', so 1+ */ |
| |
| unsigned int key_usage; /**< Optional key usage extension value: See the values in x509.h */ |
| |
| mbedtls_x509_sequence ext_key_usage; /**< Optional list of extended key usage OIDs. */ |
| |
| unsigned char ns_cert_type; /**< Optional Netscape certificate type extension value: See the values in x509.h */ |
| |
| mbedtls_x509_buf sig; /**< Signature: hash of the tbs part signed with the private key. */ |
| mbedtls_md_type_t sig_md; /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */ |
| mbedtls_pk_type_t sig_pk; /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */ |
| void *sig_opts; /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */ |
| |
| struct mbedtls_x509_crt *next; /**< Next certificate in the CA-chain. */ |
| } |
| mbedtls_x509_crt; |
| |
| /** |
| * Build flag from an algorithm/curve identifier (pk, md, ecp) |
| * Since 0 is always XXX_NONE, ignore it. |
| */ |
| #define MBEDTLS_X509_ID_FLAG( id ) ( 1 << ( id - 1 ) ) |
| |
| /** |
| * Security profile for certificate verification. |
| * |
| * All lists are bitfields, built by ORing flags from MBEDTLS_X509_ID_FLAG(). |
| */ |
| typedef struct |
| { |
| uint32_t allowed_mds; /**< MDs for signatures */ |
| uint32_t allowed_pks; /**< PK algs for signatures */ |
| uint32_t allowed_curves; /**< Elliptic curves for ECDSA */ |
| uint32_t rsa_min_bitlen; /**< Minimum size for RSA keys */ |
| } |
| mbedtls_x509_crt_profile; |
| |
| #define MBEDTLS_X509_CRT_VERSION_1 0 |
| #define MBEDTLS_X509_CRT_VERSION_2 1 |
| #define MBEDTLS_X509_CRT_VERSION_3 2 |
| |
| #define MBEDTLS_X509_RFC5280_MAX_SERIAL_LEN 32 |
| #define MBEDTLS_X509_RFC5280_UTC_TIME_LEN 15 |
| |
| #if !defined( MBEDTLS_X509_MAX_FILE_PATH_LEN ) |
| #define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 |
| #endif |
| |
| /** |
| * Container for writing a certificate (CRT) |
| */ |
| typedef struct mbedtls_x509write_cert |
| { |
| int version; |
| mbedtls_mpi serial; |
| mbedtls_pk_context *subject_key; |
| mbedtls_pk_context *issuer_key; |
| mbedtls_asn1_named_data *subject; |
| mbedtls_asn1_named_data *issuer; |
| mbedtls_md_type_t md_alg; |
| char not_before[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1]; |
| char not_after[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1]; |
| mbedtls_asn1_named_data *extensions; |
| } |
| mbedtls_x509write_cert; |
| |
| #if defined(MBEDTLS_X509_CRT_PARSE_C) |
| /** |
| * Default security profile. Should provide a good balance between security |
| * and compatibility with current deployments. |
| */ |
| extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_default; |
| |
| /** |
| * Expected next default profile. Recommended for new deployments. |
| * Currently targets a 128-bit security level, except for RSA-2048. |
| */ |
| extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_next; |
| |
| /** |
| * NSA Suite B profile. |
| */ |
| extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_suiteb; |
| |
| /** |
| * \brief Parse a single DER formatted certificate and add it |
| * to the chained list. |
| * |
| * \param chain points to the start of the chain |
| * \param buf buffer holding the certificate DER data |
| * \param buflen size of the buffer |
| * |
| * \return 0 if successful, or a specific X509 or PEM error code |
| */ |
| int mbedtls_x509_crt_parse_der( mbedtls_x509_crt *chain, const unsigned char *buf, |
| size_t buflen ); |
| |
| /** |
| * \brief Parse one or more certificates and add them |
| * to the chained list. Parses permissively. If some |
| * certificates can be parsed, the result is the number |
| * of failed certificates it encountered. If none complete |
| * correctly, the first error is returned. |
| * |
| * \param chain points to the start of the chain |
| * \param buf buffer holding the certificate data in PEM or DER format |
| * \param buflen size of the buffer |
| * (including the terminating null byte for PEM data) |
| * |
| * \return 0 if all certificates parsed successfully, a positive number |
| * if partly successful or a specific X509 or PEM error code |
| */ |
| int mbedtls_x509_crt_parse( mbedtls_x509_crt *chain, const unsigned char *buf, size_t buflen ); |
| |
| #if defined(MBEDTLS_FS_IO) |
| /** |
| * \brief Load one or more certificates and add them |
| * to the chained list. Parses permissively. If some |
| * certificates can be parsed, the result is the number |
| * of failed certificates it encountered. If none complete |
| * correctly, the first error is returned. |
| * |
| * \param chain points to the start of the chain |
| * \param path filename to read the certificates from |
| * |
| * \return 0 if all certificates parsed successfully, a positive number |
| * if partly successful or a specific X509 or PEM error code |
| */ |
| int mbedtls_x509_crt_parse_file( mbedtls_x509_crt *chain, const char *path ); |
| |
| /** |
| * \brief Load one or more certificate files from a path and add them |
| * to the chained list. Parses permissively. If some |
| * certificates can be parsed, the result is the number |
| * of failed certificates it encountered. If none complete |
| * correctly, the first error is returned. |
| * |
| * \param chain points to the start of the chain |
| * \param path directory / folder to read the certificate files from |
| * |
| * \return 0 if all certificates parsed successfully, a positive number |
| * if partly successful or a specific X509 or PEM error code |
| */ |
| int mbedtls_x509_crt_parse_path( mbedtls_x509_crt *chain, const char *path ); |
| #endif /* MBEDTLS_FS_IO */ |
| |
| /** |
| * \brief Returns an informational string about the |
| * certificate. |
| * |
| * \param buf Buffer to write to |
| * \param size Maximum size of buffer |
| * \param prefix A line prefix |
| * \param crt The X509 certificate to represent |
| * |
| * \return The length of the string written (not including the |
| * terminated nul byte), or a negative error code. |
| */ |
| int mbedtls_x509_crt_info( char *buf, size_t size, const char *prefix, |
| const mbedtls_x509_crt *crt ); |
| |
| /** |
| * \brief Returns an informational string about the |
| * verification status of a certificate. |
| * |
| * \param buf Buffer to write to |
| * \param size Maximum size of buffer |
| * \param prefix A line prefix |
| * \param flags Verification flags created by mbedtls_x509_crt_verify() |
| * |
| * \return The length of the string written (not including the |
| * terminated nul byte), or a negative error code. |
| */ |
| int mbedtls_x509_crt_verify_info( char *buf, size_t size, const char *prefix, |
| uint32_t flags ); |
| |
| /** |
| * \brief Verify the certificate signature |
| * |
| * The verify callback is a user-supplied callback that |
| * can clear / modify / add flags for a certificate. If set, |
| * the verification callback is called for each |
| * certificate in the chain (from the trust-ca down to the |
| * presented crt). The parameters for the callback are: |
| * (void *parameter, mbedtls_x509_crt *crt, int certificate_depth, |
| * int *flags). With the flags representing current flags for |
| * that specific certificate and the certificate depth from |
| * the bottom (Peer cert depth = 0). |
| * |
| * All flags left after returning from the callback |
| * are also returned to the application. The function should |
| * return 0 for anything but a fatal error. |
| * |
| * \note In case verification failed, the results can be displayed |
| * using \c mbedtls_x509_crt_verify_info() |
| * |
| * \note Same as \c mbedtls_x509_crt_verify_with_profile() with the |
| * default security profile. |
| * |
| * \note It is your responsibility to provide up-to-date CRLs for |
| * all trusted CAs. If no CRL is provided for the CA that was |
| * used to sign the certificate, CRL verification is skipped |
| * silently, that is *without* setting any flag. |
| * |
| * \param crt a certificate (chain) to be verified |
| * \param trust_ca the list of trusted CAs |
| * \param ca_crl the list of CRLs for trusted CAs (see note above) |
| * \param cn expected Common Name (can be set to |
| * NULL if the CN must not be verified) |
| * \param flags result of the verification |
| * \param f_vrfy verification function |
| * \param p_vrfy verification parameter |
| * |
| * \return 0 if successful or MBEDTLS_ERR_X509_CERT_VERIFY_FAILED |
| * in which case *flags will have one or more |
| * MBEDTLS_X509_BADCERT_XXX or MBEDTLS_X509_BADCRL_XXX flags |
| * set, |
| * or another error in case of a fatal error encountered |
| * during the verification process. |
| */ |
| int mbedtls_x509_crt_verify( mbedtls_x509_crt *crt, |
| mbedtls_x509_crt *trust_ca, |
| mbedtls_x509_crl *ca_crl, |
| const char *cn, uint32_t *flags, |
| int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), |
| void *p_vrfy ); |
| |
| /** |
| * \brief Verify the certificate signature according to profile |
| * |
| * \note Same as \c mbedtls_x509_crt_verify(), but with explicit |
| * security profile. |
| * |
| * \note The restrictions on keys (RSA minimum size, allowed curves |
| * for ECDSA) apply to all certificates: trusted root, |
| * intermediate CAs if any, and end entity certificate. |
| * |
| * \param crt a certificate (chain) to be verified |
| * \param trust_ca the list of trusted CAs |
| * \param ca_crl the list of CRLs for trusted CAs |
| * \param profile security profile for verification |
| * \param cn expected Common Name (can be set to |
| * NULL if the CN must not be verified) |
| * \param flags result of the verification |
| * \param f_vrfy verification function |
| * \param p_vrfy verification parameter |
| * |
| * \return 0 if successful or MBEDTLS_ERR_X509_CERT_VERIFY_FAILED |
| * in which case *flags will have one or more |
| * MBEDTLS_X509_BADCERT_XXX or MBEDTLS_X509_BADCRL_XXX flags |
| * set, |
| * or another error in case of a fatal error encountered |
| * during the verification process. |
| */ |
| int mbedtls_x509_crt_verify_with_profile( mbedtls_x509_crt *crt, |
| mbedtls_x509_crt *trust_ca, |
| mbedtls_x509_crl *ca_crl, |
| const mbedtls_x509_crt_profile *profile, |
| const char *cn, uint32_t *flags, |
| int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), |
| void *p_vrfy ); |
| |
| #if defined(MBEDTLS_X509_CHECK_KEY_USAGE) |
| /** |
| * \brief Check usage of certificate against keyUsage extension. |
| * |
| * \param crt Leaf certificate used. |
| * \param usage Intended usage(s) (eg MBEDTLS_X509_KU_KEY_ENCIPHERMENT |
| * before using the certificate to perform an RSA key |
| * exchange). |
| * |
| * \note Except for decipherOnly and encipherOnly, a bit set in the |
| * usage argument means this bit MUST be set in the |
| * certificate. For decipherOnly and encipherOnly, it means |
| * that bit MAY be set. |
| * |
| * \return 0 is these uses of the certificate are allowed, |
| * MBEDTLS_ERR_X509_BAD_INPUT_DATA if the keyUsage extension |
| * is present but does not match the usage argument. |
| * |
| * \note You should only call this function on leaf certificates, on |
| * (intermediate) CAs the keyUsage extension is automatically |
| * checked by \c mbedtls_x509_crt_verify(). |
| */ |
| int mbedtls_x509_crt_check_key_usage( const mbedtls_x509_crt *crt, |
| unsigned int usage ); |
| #endif /* MBEDTLS_X509_CHECK_KEY_USAGE) */ |
| |
| #if defined(MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE) |
| /** |
| * \brief Check usage of certificate against extentedJeyUsage. |
| * |
| * \param crt Leaf certificate used. |
| * \param usage_oid Intended usage (eg MBEDTLS_OID_SERVER_AUTH or MBEDTLS_OID_CLIENT_AUTH). |
| * \param usage_len Length of usage_oid (eg given by MBEDTLS_OID_SIZE()). |
| * |
| * \return 0 if this use of the certificate is allowed, |
| * MBEDTLS_ERR_X509_BAD_INPUT_DATA if not. |
| * |
| * \note Usually only makes sense on leaf certificates. |
| */ |
| int mbedtls_x509_crt_check_extended_key_usage( const mbedtls_x509_crt *crt, |
| const char *usage_oid, |
| size_t usage_len ); |
| #endif /* MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE) */ |
| |
| #if defined(MBEDTLS_X509_CRL_PARSE_C) |
| /** |
| * \brief Verify the certificate revocation status |
| * |
| * \param crt a certificate to be verified |
| * \param crl the CRL to verify against |
| * |
| * \return 1 if the certificate is revoked, 0 otherwise |
| * |
| */ |
| int mbedtls_x509_crt_is_revoked( const mbedtls_x509_crt *crt, const mbedtls_x509_crl *crl ); |
| #endif /* MBEDTLS_X509_CRL_PARSE_C */ |
| |
| /** |
| * \brief Initialize a certificate (chain) |
| * |
| * \param crt Certificate chain to initialize |
| */ |
| void mbedtls_x509_crt_init( mbedtls_x509_crt *crt ); |
| |
| /** |
| * \brief Unallocate all certificate data |
| * |
| * \param crt Certificate chain to free |
| */ |
| void mbedtls_x509_crt_free( mbedtls_x509_crt *crt ); |
| #endif /* MBEDTLS_X509_CRT_PARSE_C */ |
| |
| /* \} name */ |
| /* \} addtogroup x509_module */ |
| |
| #if defined(MBEDTLS_X509_CRT_WRITE_C) |
| /** |
| * \brief Initialize a CRT writing context |
| * |
| * \param ctx CRT context to initialize |
| */ |
| void mbedtls_x509write_crt_init( mbedtls_x509write_cert *ctx ); |
| |
| /** |
| * \brief Set the verion for a Certificate |
| * Default: MBEDTLS_X509_CRT_VERSION_3 |
| * |
| * \param ctx CRT context to use |
| * \param version version to set (MBEDTLS_X509_CRT_VERSION_1, MBEDTLS_X509_CRT_VERSION_2 or |
| * MBEDTLS_X509_CRT_VERSION_3) |
| */ |
| void mbedtls_x509write_crt_set_version( mbedtls_x509write_cert *ctx, int version ); |
| |
| /** |
| * \brief Set the serial number for a Certificate. |
| * |
| * \param ctx CRT context to use |
| * \param serial serial number to set |
| * |
| * \return 0 if successful |
| */ |
| int mbedtls_x509write_crt_set_serial( mbedtls_x509write_cert *ctx, const mbedtls_mpi *serial ); |
| |
| /** |
| * \brief Set the validity period for a Certificate |
| * Timestamps should be in string format for UTC timezone |
| * i.e. "YYYYMMDDhhmmss" |
| * e.g. "20131231235959" for December 31st 2013 |
| * at 23:59:59 |
| * |
| * \param ctx CRT context to use |
| * \param not_before not_before timestamp |
| * \param not_after not_after timestamp |
| * |
| * \return 0 if timestamp was parsed successfully, or |
| * a specific error code |
| */ |
| int mbedtls_x509write_crt_set_validity( mbedtls_x509write_cert *ctx, const char *not_before, |
| const char *not_after ); |
| |
| /** |
| * \brief Set the issuer name for a Certificate |
| * Issuer names should contain a comma-separated list |
| * of OID types and values: |
| * e.g. "C=UK,O=ARM,CN=mbed TLS CA" |
| * |
| * \param ctx CRT context to use |
| * \param issuer_name issuer name to set |
| * |
| * \return 0 if issuer name was parsed successfully, or |
| * a specific error code |
| */ |
| int mbedtls_x509write_crt_set_issuer_name( mbedtls_x509write_cert *ctx, |
| const char *issuer_name ); |
| |
| /** |
| * \brief Set the subject name for a Certificate |
| * Subject names should contain a comma-separated list |
| * of OID types and values: |
| * e.g. "C=UK,O=ARM,CN=mbed TLS Server 1" |
| * |
| * \param ctx CRT context to use |
| * \param subject_name subject name to set |
| * |
| * \return 0 if subject name was parsed successfully, or |
| * a specific error code |
| */ |
| int mbedtls_x509write_crt_set_subject_name( mbedtls_x509write_cert *ctx, |
| const char *subject_name ); |
| |
| /** |
| * \brief Set the subject public key for the certificate |
| * |
| * \param ctx CRT context to use |
| * \param key public key to include |
| */ |
| void mbedtls_x509write_crt_set_subject_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key ); |
| |
| /** |
| * \brief Set the issuer key used for signing the certificate |
| * |
| * \param ctx CRT context to use |
| * \param key private key to sign with |
| */ |
| void mbedtls_x509write_crt_set_issuer_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key ); |
| |
| /** |
| * \brief Set the MD algorithm to use for the signature |
| * (e.g. MBEDTLS_MD_SHA1) |
| * |
| * \param ctx CRT context to use |
| * \param md_alg MD algorithm to use |
| */ |
| void mbedtls_x509write_crt_set_md_alg( mbedtls_x509write_cert *ctx, mbedtls_md_type_t md_alg ); |
| |
| /** |
| * \brief Generic function to add to or replace an extension in the |
| * CRT |
| * |
| * \param ctx CRT context to use |
| * \param oid OID of the extension |
| * \param oid_len length of the OID |
| * \param critical if the extension is critical (per the RFC's definition) |
| * \param val value of the extension OCTET STRING |
| * \param val_len length of the value data |
| * |
| * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED |
| */ |
| int mbedtls_x509write_crt_set_extension( mbedtls_x509write_cert *ctx, |
| const char *oid, size_t oid_len, |
| int critical, |
| const unsigned char *val, size_t val_len ); |
| |
| /** |
| * \brief Set the basicConstraints extension for a CRT |
| * |
| * \param ctx CRT context to use |
| * \param is_ca is this a CA certificate |
| * \param max_pathlen maximum length of certificate chains below this |
| * certificate (only for CA certificates, -1 is |
| * inlimited) |
| * |
| * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED |
| */ |
| int mbedtls_x509write_crt_set_basic_constraints( mbedtls_x509write_cert *ctx, |
| int is_ca, int max_pathlen ); |
| |
| #if defined(MBEDTLS_SHA1_C) |
| /** |
| * \brief Set the subjectKeyIdentifier extension for a CRT |
| * Requires that mbedtls_x509write_crt_set_subject_key() has been |
| * called before |
| * |
| * \param ctx CRT context to use |
| * |
| * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED |
| */ |
| int mbedtls_x509write_crt_set_subject_key_identifier( mbedtls_x509write_cert *ctx ); |
| |
| /** |
| * \brief Set the authorityKeyIdentifier extension for a CRT |
| * Requires that mbedtls_x509write_crt_set_issuer_key() has been |
| * called before |
| * |
| * \param ctx CRT context to use |
| * |
| * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED |
| */ |
| int mbedtls_x509write_crt_set_authority_key_identifier( mbedtls_x509write_cert *ctx ); |
| #endif /* MBEDTLS_SHA1_C */ |
| |
| /** |
| * \brief Set the Key Usage Extension flags |
| * (e.g. MBEDTLS_X509_KU_DIGITAL_SIGNATURE | MBEDTLS_X509_KU_KEY_CERT_SIGN) |
| * |
| * \param ctx CRT context to use |
| * \param key_usage key usage flags to set |
| * |
| * \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED |
| */ |
| int mbedtls_x509write_crt_set_key_usage( mbedtls_x509write_cert *ctx, |
| unsigned int key_usage ); |
| |
| /** |
| * \brief Set the Netscape Cert Type flags |
| * (e.g. MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT | MBEDTLS_X509_NS_CERT_TYPE_EMAIL) |
| * |
| * \param ctx CRT context to use |
| * \param ns_cert_type Netscape Cert Type flags to set |
| * |
| * \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED |
| */ |
| int mbedtls_x509write_crt_set_ns_cert_type( mbedtls_x509write_cert *ctx, |
| unsigned char ns_cert_type ); |
| |
| /** |
| * \brief Free the contents of a CRT write context |
| * |
| * \param ctx CRT context to free |
| */ |
| void mbedtls_x509write_crt_free( mbedtls_x509write_cert *ctx ); |
| |
| /** |
| * \brief Write a built up certificate to a X509 DER structure |
| * Note: data is written at the end of the buffer! Use the |
| * return value to determine where you should start |
| * using the buffer |
| * |
| * \param ctx certificate to write away |
| * \param buf buffer to write to |
| * \param size size of the buffer |
| * \param f_rng RNG function (for signature, see note) |
| * \param p_rng RNG parameter |
| * |
| * \return length of data written if successful, or a specific |
| * error code |
| * |
| * \note f_rng may be NULL if RSA is used for signature and the |
| * signature is made offline (otherwise f_rng is desirable |
| * for countermeasures against timing attacks). |
| * ECDSA signatures always require a non-NULL f_rng. |
| */ |
| int mbedtls_x509write_crt_der( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ); |
| |
| #if defined(MBEDTLS_PEM_WRITE_C) |
| /** |
| * \brief Write a built up certificate to a X509 PEM string |
| * |
| * \param ctx certificate to write away |
| * \param buf buffer to write to |
| * \param size size of the buffer |
| * \param f_rng RNG function (for signature, see note) |
| * \param p_rng RNG parameter |
| * |
| * \return 0 if successful, or a specific error code |
| * |
| * \note f_rng may be NULL if RSA is used for signature and the |
| * signature is made offline (otherwise f_rng is desirable |
| * for countermeasures against timing attacks). |
| * ECDSA signatures always require a non-NULL f_rng. |
| */ |
| int mbedtls_x509write_crt_pem( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size, |
| int (*f_rng)(void *, unsigned char *, size_t), |
| void *p_rng ); |
| #endif /* MBEDTLS_PEM_WRITE_C */ |
| #endif /* MBEDTLS_X509_CRT_WRITE_C */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* mbedtls_x509_crt.h */ |
