blob: 5a5ce6c861b506afa337161f7907921e38f00a59 [file] [log] [blame]
/******************************************************************************
* Filename: hw_rfc_pwr_h
* Revised: 2016-03-14 09:20:59 +0100 (Mon, 14 Mar 2016)
* Revision: 45924
*
* Copyright (c) 2015 - 2016, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2) Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3) Neither the name of the ORGANIZATION nor the names of its contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef __HW_RFC_PWR_H__
#define __HW_RFC_PWR_H__
//*****************************************************************************
//
// This section defines the register offsets of
// RFC_PWR component
//
//*****************************************************************************
// RF Core Power Management and Clock Enable
#define RFC_PWR_O_PWMCLKEN 0x00000000
//*****************************************************************************
//
// Register: RFC_PWR_O_PWMCLKEN
//
//*****************************************************************************
// Field: [10] RFCTRC
//
// Enable clock to the RF Core Tracer (RFCTRC) module.
#define RFC_PWR_PWMCLKEN_RFCTRC 0x00000400
#define RFC_PWR_PWMCLKEN_RFCTRC_BITN 10
#define RFC_PWR_PWMCLKEN_RFCTRC_M 0x00000400
#define RFC_PWR_PWMCLKEN_RFCTRC_S 10
// Field: [9] FSCA
//
// Enable clock to the Frequency Synthesizer Calibration Accelerator (FSCA)
// module.
#define RFC_PWR_PWMCLKEN_FSCA 0x00000200
#define RFC_PWR_PWMCLKEN_FSCA_BITN 9
#define RFC_PWR_PWMCLKEN_FSCA_M 0x00000200
#define RFC_PWR_PWMCLKEN_FSCA_S 9
// Field: [8] PHA
//
// Enable clock to the Packet Handling Accelerator (PHA) module.
#define RFC_PWR_PWMCLKEN_PHA 0x00000100
#define RFC_PWR_PWMCLKEN_PHA_BITN 8
#define RFC_PWR_PWMCLKEN_PHA_M 0x00000100
#define RFC_PWR_PWMCLKEN_PHA_S 8
// Field: [7] RAT
//
// Enable clock to the Radio Timer (RAT) module.
#define RFC_PWR_PWMCLKEN_RAT 0x00000080
#define RFC_PWR_PWMCLKEN_RAT_BITN 7
#define RFC_PWR_PWMCLKEN_RAT_M 0x00000080
#define RFC_PWR_PWMCLKEN_RAT_S 7
// Field: [6] RFERAM
//
// Enable clock to the RF Engine RAM module.
#define RFC_PWR_PWMCLKEN_RFERAM 0x00000040
#define RFC_PWR_PWMCLKEN_RFERAM_BITN 6
#define RFC_PWR_PWMCLKEN_RFERAM_M 0x00000040
#define RFC_PWR_PWMCLKEN_RFERAM_S 6
// Field: [5] RFE
//
// Enable clock to the RF Engine (RFE) module.
#define RFC_PWR_PWMCLKEN_RFE 0x00000020
#define RFC_PWR_PWMCLKEN_RFE_BITN 5
#define RFC_PWR_PWMCLKEN_RFE_M 0x00000020
#define RFC_PWR_PWMCLKEN_RFE_S 5
// Field: [4] MDMRAM
//
// Enable clock to the Modem RAM module.
#define RFC_PWR_PWMCLKEN_MDMRAM 0x00000010
#define RFC_PWR_PWMCLKEN_MDMRAM_BITN 4
#define RFC_PWR_PWMCLKEN_MDMRAM_M 0x00000010
#define RFC_PWR_PWMCLKEN_MDMRAM_S 4
// Field: [3] MDM
//
// Enable clock to the Modem (MDM) module.
#define RFC_PWR_PWMCLKEN_MDM 0x00000008
#define RFC_PWR_PWMCLKEN_MDM_BITN 3
#define RFC_PWR_PWMCLKEN_MDM_M 0x00000008
#define RFC_PWR_PWMCLKEN_MDM_S 3
// Field: [2] CPERAM
//
// Enable clock to the Command and Packet Engine (CPE) RAM module. As part of
// RF Core initialization, set this bit together with CPE bit to enable CPE to
// boot.
#define RFC_PWR_PWMCLKEN_CPERAM 0x00000004
#define RFC_PWR_PWMCLKEN_CPERAM_BITN 2
#define RFC_PWR_PWMCLKEN_CPERAM_M 0x00000004
#define RFC_PWR_PWMCLKEN_CPERAM_S 2
// Field: [1] CPE
//
// Enable processor clock (hclk) to the Command and Packet Engine (CPE). As
// part of RF Core initialization, set this bit together with CPERAM bit to
// enable CPE to boot.
#define RFC_PWR_PWMCLKEN_CPE 0x00000002
#define RFC_PWR_PWMCLKEN_CPE_BITN 1
#define RFC_PWR_PWMCLKEN_CPE_M 0x00000002
#define RFC_PWR_PWMCLKEN_CPE_S 1
// Field: [0] RFC
//
// Enable essential clocks for the RF Core interface. This includes the
// interconnect, the radio doorbell DBELL command interface, the power
// management (PWR) clock control module, and bus clock (sclk) for the CPE. To
// remove possibility of locking yourself out from the RF Core, this bit can
// not be cleared. If you need to disable all clocks to the RF Core, see the
// PRCM:RFCCLKG.CLK_EN register.
#define RFC_PWR_PWMCLKEN_RFC 0x00000001
#define RFC_PWR_PWMCLKEN_RFC_BITN 0
#define RFC_PWR_PWMCLKEN_RFC_M 0x00000001
#define RFC_PWR_PWMCLKEN_RFC_S 0
#endif // __RFC_PWR__