blob: fb558ada6d91cb07e45700b14c2d898f1c3c25e9 [file] [log] [blame]
/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
* File Name : 91x_fmi.c
* Author : MCD Application Team
* Date First Issued : 05/18/2006 : Version 1.0
* Description : This file provides all the FMI software functions.
********************************************************************************
* History:
* 05/24/2006 : Version 1.1
* 05/18/2006 : Version 1.0
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
/* Standard include ----------------------------------------------------------*/
#include "91x_fmi.h"
/* Include of other module interface headers ---------------------------------*/
/* Local includes ------------------------------------------------------------*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define TIMEOUT 0xFFFFFF /* Timeout value */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Interface functions -------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : FMI_BankRemapConfig
* Description : Configure the addresses and sizes of bank 0 and bank 1.
* Input1 : FMI_BootBankSize: specifies the boot bank size.
* This parameter can be one of the following values:
* - 0x0: 32KBytes.
* - 0x1: 64KBytes.
* - 0x2: 128KBytes.
* - 0x3: 256KBytes.
* - 0x4: 512KBytes.
* ....
* - 0xB: 64MBytes.
* Input2 : FMI_NonBootBankSize: specifies the non boot bank size.
* This parameter can be one of the following values:
* - 0x0: 8KBytes.
* - 0x1: 16KBytes.
* - 0x2: 32KBytes.
* - 0x3: 64KBytes.
* ....
* - 0xD: 64MBytes.
* Input3 : FMI_BootBankAddress: specifies the address of the boot bank.
* Input4 : FMI_NonBootBankAddress: specifies the address of the non
* boot bank.
* Output : None
* Return : None
*******************************************************************************/
void FMI_BankRemapConfig(u8 FMI_BootBankSize, u8 FMI_NonBootBankSize, \
u32 FMI_BootBankAddress, u32 FMI_NonBootBankAddress)
{
FMI->BBSR = FMI_BootBankSize;
FMI->NBBSR = FMI_NonBootBankSize;
FMI->BBADR = (FMI_BootBankAddress >> 2);
FMI->NBBADR = (FMI_NonBootBankAddress >> 2);
FMI->CR |= 0x18; /* Enable bank 1 */
}
/*******************************************************************************
* Function Name : FMI_Config
* Description : Configure the FMI.
* Input1 : FMI_ReadWaitState: specifies the needed read wait states.
* This parameter can be one of the following values:
* - FMI_READ_WAIT_STATE_1: One read wait state.
* - FMI_READ_WAIT_STATE_2: Two read wait states.
* - FMI_READ_WAIT_STATE_3: Three read wait states.
* Input2 : FMI_WriteWaitState: specifies the needed write wait states.
* This parameter can be one of the following values:
* - FMI_WRITE_WAIT_STATE_1: One write wait state.
* - FMI_WRITE_WAIT_STATE_2: Two write wait states.
* Input3 : FMI_PWD: specifies the power down mode status.
* This parameter can be one of the following values:
* - FMI_PWD_ENABLE: Enable the PWD.
* - FMI_PWD_DISABLE: Disable the PWD.
* Input4 : FMI_LVDEN: specifies the low voltage detector status.
* This parameter can be one of the following values:
* - FMI_LVD_ENABLE: Enable the LVD.
* - FMI_LVD_DISABLE: Disable the LVD.
* Input5 : FMI_FreqRange: specifies the working frequency range.
* This parameter can be one of the following values:
* - FMI_FREQ_LOW: Low working frequency (up to 66MHz).
* - FMI_FREQ_HIGH: High working frequency (above 66MHz) .
* Output : None
* Return : None
*******************************************************************************/
void FMI_Config(u16 FMI_ReadWaitState, u32 FMI_WriteWaitState, u16 FMI_PWD,\
u16 FMI_LVDEN, u16 FMI_FreqRange)
{
/* Configure the write wait state value */
if (FMI_WriteWaitState == FMI_WRITE_WAIT_STATE_1)
{
FMI->CR |= FMI_WRITE_WAIT_STATE_1;
}
else
{
FMI->CR &= FMI_WRITE_WAIT_STATE_0;
}
/* Write a write flash configuration register command */
*(vu16 *)FMI_BANK_1 = 0x60;
/* Configure the flash configuration register */
*(vu16 *)(FMI_BANK_1|FMI_ReadWaitState|FMI_PWD|FMI_LVDEN|FMI_FreqRange) = 0x03;
}
/*******************************************************************************
* Function Name : FMI_EraseSector
* Description : Erase the needed sector.
* Input : FMI_Sector: specifies the sector to be erased.
* This parameter can be one of the following values:
* - FMI_B0S0: FMI bank 0 sector 0.
* - FMI_B0S1: FMI bank 0 sector 1.
* - FMI_B0S2: FMI bank 0 sector 2.
* - FMI_B0S3: FMI bank 0 sector 3.
* - FMI_B0S4: FMI bank 0 sector 4.
* - FMI_B0S5: FMI bank 0 sector 5.
* - FMI_B0S6: FMI bank 0 sector 6.
* - FMI_B0S7: FMI bank 0 sector 7.
* - FMI_B1S0: FMI bank 1 sector 0.
* - FMI_B1S1: FMI bank 1 sector 1.
* - FMI_B1S2: FMI bank 1 sector 2.
* - FMI_B1S3: FMI bank 1 sector 3.
* Output : None
* Return : None
*******************************************************************************/
void FMI_EraseSector(vu32 FMI_Sector)
{
/* Write an erase set-up command to the sector */
*(vu16 *)FMI_Sector = 0x20;
/* Write an erase confirm command to the sector */
*(vu16 *)FMI_Sector = 0xD0;
}
/*******************************************************************************
* Function Name : FMI_EraseBank
* Description : Erase the needed bank.
* Input : FMI_Bank: specifies the bank to be erased.
* This parameter can be one of the following values:
* - FMI_BANK_0: FMI bank 0.
* - FMI_BANK_1: FMI bank 1.
* Output : None
* Return : None
*******************************************************************************/
void FMI_EraseBank(vu32 FMI_Bank)
{
/* Write a bank erase set-up command to the bank */
*(vu16 *)FMI_Bank = 0x80;
/* Write an erase confirm command to the sector */
*(vu16 *)FMI_Bank = 0xD0;
}
/*******************************************************************************
* Function Name : FMI_WriteHalfWord
* Description : Write a halfword to the needed Flash memory address.
* Input 1 : FMI_Address: specifies the address offset where the data will
* be written.
* Input 2 : FMI_Data: the needed data.
* Output : None
* Return : None
*******************************************************************************/
void FMI_WriteHalfWord(u32 FMI_Address, u16 FMI_Data)
{
/* Write a program command to the sector to be written */
*(vu16 *)(FMI_Address & 0xFFFFFFFC) = 0x40;
/* Write the halfword to the destination address */
*(vu16 *)FMI_Address = FMI_Data;
}
/*******************************************************************************
* Function Name : FMI_WriteOTPHalfWord
* Description : Write a halfword to the needed OTP sector address.
* Input 1 : FMI_OTPHWAddress: specifies the halfword address offset
* where the data will be written.
* This parameter can be one of the following values:
* - FMI_OTP_LOW_HALFWORD_0: OTP Low halfword 0.
* - FMI_OTP_HIGH_HALFWORD_0: OTP High halfword 0.
* - FMI_OTP_LOW_HALFWORD_1: OTP Low halfword 1.
* - FMI_OTP_HIGH_HALFWORD_1: OTP High halfword 1.
* - FMI_OTP_LOW_HALFWORD_2: OTP Low halfword 2.
* - FMI_OTP_HIGH_HALFWORD_2: OTP High halfword 2.
* - FMI_OTP_LOW_HALFWORD_3: OTP Low halfword 3.
* - FMI_OTP_HIGH_HALFWORD_3: OTP High halfword 3.
* - FMI_OTP_LOW_HALFWORD_4: OTP Low halfword 4.
* - FMI_OTP_HIGH_HALFWORD_4: OTP High halfword 4.
* - FMI_OTP_LOW_HALFWORD_5: OTP Low halfword 5.
* - FMI_OTP_HIGH_HALFWORD_5: OTP High halfword 5.
* - FMI_OTP_LOW_HALFWORD_6: OTP Low halfword 6.
* - FMI_OTP_HIGH_HALFWORD_6: OTP High halfword 6.
* - FMI_OTP_LOW_HALFWORD_7: OTP Low halfword 7.
* - FMI_OTP_HIGH_HALFWORD_7: OTP High halfword 7.
* Input 2 : FMI_OTPData: The needed OTP data.
* Output : None
* Return : None
*******************************************************************************/
void FMI_WriteOTPHalfWord(u8 FMI_OTPHWAddress, u16 FMI_OTPData)
{
/* Write a write OTP command to the needed address */
*(vu16 *)(FMI_BANK_1) = 0xC0;
/* Write the halfword to the destination address */
*(vu16 *)(FMI_BANK_1 + FMI_OTPHWAddress) = FMI_OTPData;
}
/*******************************************************************************
* Function Name : FMI_ReadWord
* Description : Read the correspondent data.
* Input : FMI_Address: specifies the needed address.
* Output : None
* Return : The data contained in the specified address.
*******************************************************************************/
u32 FMI_ReadWord(u32 FMI_Address)
{
return(*(u32*)FMI_Address);
}
/*******************************************************************************
* Function Name : FMI_ReadOTPData
* Description : Read data from the OTP sector.
* Input : FMI_OTPAddress: specifies the address of the data to be read.
* This parameter can be one of the following values:
* - FMI_OTP_WORD_0: FMI bank 0 sector 0.
* - FMI_OTP_WORD_1: FMI bank 0 sector 1.
* - FMI_OTP_WORD_2: FMI bank 0 sector 2.
* - FMI_OTP_WORD_3: FMI bank 0 sector 3.
* - FMI_OTP_WORD_4: FMI bank 0 sector 4.
* - FMI_OTP_WORD_5: FMI bank 0 sector 5.
* - FMI_OTP_WORD_6: FMI bank 0 sector 6.
* - FMI_OTP_WORD_7: FMI bank 0 sector 7.
* Output : None
* Return : The needed OTP words.
*******************************************************************************/
u32 FMI_ReadOTPData(u8 FMI_OTPAddress)
{
u32 OTP_Data = 0x0;
/* write a read OTP sector command */
*(vu16 *)(FMI_BANK_1) = 0x98;
/* Read the correspondent data */
OTP_Data = (*(vu32*)(FMI_BANK_1 + FMI_OTPAddress));
/* Write a read array command */
*(vu16 *)(FMI_BANK_1) = 0xFF;
return OTP_Data;
}
/*******************************************************************************
* Function Name : FMI_GetFlagStatus
* Description : Check whether the specified FMI flag is set or not.
* Input1 : FMI_Flag: flag to check.
* This parameter can be one of the following values:
* - FMI_FLAG_SPS: Sector Protection Status Flag.
* - FMI_FLAG_PSS: Program Suspend Status Flag.
* - FMI_FLAG_PS: Program Status Flag.
* - FMI_FLAG_ES: Erase Status Flag.
* - FMI_FLAG_ESS: Erase Suspend Status Flag.
* - FMI_FLAG_PECS: FPEC Status Flag.
* Input2 : FMI_Bank: specifies the needed bank.
* This parameter can be one of the following values:
* - FMI_BANK_0: FMI bank 0.
* - FMI_BANK_1: FMI bank 1.
* Output : None
* Return : None
*******************************************************************************/
FlagStatus FMI_GetFlagStatus(u8 FMI_Flag, vu32 FMI_Bank)
{
u16 FMI_Status_Register = 0;
/* Write a read status register command */
*(vu16 *)FMI_Bank = 0x70;
/* Wait until operation completion */
while(!((*(vu16 *)FMI_Bank) & 0x80));
/* Read the status register */
FMI_Status_Register = *(vu16 *)FMI_Bank;
/* Write a read array command */
*(vu16 *)FMI_Bank = 0xFF;
if((FMI_Status_Register & FMI_Flag) != RESET)
{
return SET;
}
else
{
return RESET;
}
}
/*******************************************************************************
* Function Name : FMI_GetReadWaitStateValue
* Description : Get the current Read wait state value.
* Input : None
* Output : None
* Return : The current read wait states value.
*******************************************************************************/
u16 FMI_GetReadWaitStateValue(void)
{
u16 FMI_Configuration_Register = 0;
/* Write a read flash configuration register command */
*(vu16 *)FMI_BANK_1 = 0x90;
/* Read the flash configuration register */
FMI_Configuration_Register = *(vu16 *)(FMI_BANK_1 + 0x14);
/* Write a read array command */
*(vu16 *)FMI_BANK_1 = 0xFF;
FMI_Configuration_Register = ((FMI_Configuration_Register>>11) + 1) & 0x3;
/* Return the wait states value */
return FMI_Configuration_Register;
}
/*******************************************************************************
* Function Name : FMI_GetWriteWaitStateValue
* Description : Get the current write wait state value.
* Input : None
* Output : None
* Return : The current write wait states value.
*******************************************************************************/
u16 FMI_GetWriteWaitStateValue(void)
{
return ((u16)((FMI->CR & 0x100) >> 8));
}
/*******************************************************************************
* Function Name : FMI_SuspendEnable
* Description : Suspend command enable.
* Input : FMI_Bank: specifies the bank to be suspended.
* This parameter can be one of the following values:
* - FMI_BANK_0: FMI bank 0.
* - FMI_BANK_1: FMI bank 1.
* Output : None
* Return : None
*******************************************************************************/
void FMI_SuspendEnable(vu32 FMI_Bank)
{
/* Write a suspend command to the bank */
*(vu16 *)FMI_Bank = 0xB0;
}
/*******************************************************************************
* Function Name : FMI_ResumeEnable
* Description : Resume the suspended command.
* Input : FMI_Bank: specifies the suspended bank.
* This parameter can be one of the following values:
* - FMI_BANK_0: FMI bank 0.
* - FMI_BANK_1: FMI bank 1.
* Output : None
* Return : None
*******************************************************************************/
void FMI_ResumeEnable(vu32 FMI_Bank)
{
/* Write a resume command to the bank */
*(vu16 *)FMI_Bank = 0xD0;
}
/*******************************************************************************
* Function Name : FMI_ClearFlag
* Description : Clear the FMI Flags on the correspondent bank.
* Input : FMI_Bank: specifies the needed bank.
* This parameter can be one of the following values:
* - FMI_BANK_0: FMI bank 0.
* - FMI_BANK_1: FMI bank 1.
* Output : None
* Return : None
*******************************************************************************/
void FMI_ClearFlag(vu32 FMI_Bank)
{
/* Write a clear status register command */
*(vu16 *)FMI_Bank = 0x50;
}
/*******************************************************************************
* Function Name : FMI_WriteProtectionCmd
* Description : Enable or disable the write protection for the needed sector.
* Input1 : FMI_Sector: specifies the sector to be protected or
* unprotected.
* This parameter can be one of the following values:
* - FMI_B0S0: FMI bank 0 sector 0.
* - FMI_B0S1: FMI bank 0 sector 1.
* - FMI_B0S2: FMI bank 0 sector 2.
* - FMI_B0S3: FMI bank 0 sector 3.
* - FMI_B0S4: FMI bank 0 sector 4.
* - FMI_B0S5: FMI bank 0 sector 5.
* - FMI_B0S6: FMI bank 0 sector 6.
* - FMI_B0S7: FMI bank 0 sector 7.
* - FMI_B1S0: FMI bank 1 sector 0.
* - FMI_B1S1: FMI bank 1 sector 1.
* - FMI_B1S2: FMI bank 1 sector 2.
* - FMI_B1S3: FMI bank 1 sector 3.
* Input2 : FMI_NewState: specifies the protection status.
* This parameter can be one of the following values:
* - ENABLE: Enable the protection.
* - DISABLE: Disable the protection.
* Output : None
* Return : None
*******************************************************************************/
void FMI_WriteProtectionCmd(vu32 FMI_Sector, FunctionalState FMI_NewState)
{
if (FMI_NewState == ENABLE)
{
*(vu16*)FMI_Sector = 0x60;
*(vu16*)FMI_Sector = 0x01;
*(vu16*)FMI_Sector = 0xFF;
}
else /* DISABLE */
{
*(vu16*)FMI_Sector = 0x60;
*(vu16*)FMI_Sector = 0xD0;
*(vu16*)FMI_Sector = 0xFF;
}
}
/*******************************************************************************
* Function Name : FMI_GetWriteProtectionStatus
* Description : Get the write protection status for the needed sector.
* Input : FMI_Sector_Mask: specifies the needed sector mask.
* This parameter can be one of the following values:
* - FMI_B0S0_MASK: FMI bank 0 sector 0.
* - FMI_B0S1_MASK: FMI bank 0 sector 1.
* - FMI_B0S2_MASK: FMI bank 0 sector 2.
* - FMI_B0S3_MASK: FMI bank 0 sector 3.
* - FMI_B0S4_MASK: FMI bank 0 sector 4.
* - FMI_B0S5_MASK: FMI bank 0 sector 5.
* - FMI_B0S6_MASK: FMI bank 0 sector 6.
* - FMI_B0S7_MASK: FMI bank 0 sector 7.
* - FMI_B1S0_MASK: FMI bank 1 sector 0.
* - FMI_B1S1_MASK: FMI bank 1 sector 1.
* - FMI_B1S2_MASK: FMI bank 1 sector 2.
* - FMI_B1S3_MASK: FMI bank 1 sector 3.
* Output : None
* Return : The Protection Status of the needed sector.
* - RESET: The needed sector is not write protected.
* - SET : The needed sector is write protected.
*******************************************************************************/
FlagStatus FMI_GetWriteProtectionStatus(u32 FMI_Sector_Mask)
{
u16 Protection_Level_1_Register = 0;
/* Write a read flash protection level 1 register command */
*(vu16 *)FMI_BANK_1 = 0x90;
/* Read the flash protection level 1 register */
Protection_Level_1_Register = *(vu16 *)(FMI_BANK_1 + 0x10);
/* Write a read array command */
*(vu16 *)FMI_BANK_1 = 0xFF;
if (Protection_Level_1_Register &= FMI_Sector_Mask)
{
return SET;
}
else
{
return RESET;
}
}
/*******************************************************************************
* Function Name : FMI_WaitForLastOperation
* Description : Wait until the last operation (Write halfword, Write OTP
* halfword, Erase sector and Erase bank) completion.
* Input : FMI_Bank: specifies the bank where the operation is on going.
* This parameter can be one of the following values:
* - FMI_BANK_0: FMI bank 0.
* - FMI_BANK_1: FMI bank 1.
* Output : None
* Return : The timeout status.
* This parameter can be one of the following values:
* - FMI_TIME_OUT_ERROR: Timeout error occurred.
* - FMI_NO_TIME_OUT_ERROR: No timeout error.
*******************************************************************************/
u8 FMI_WaitForLastOperation(vu32 FMI_Bank)
{
u32 Time_Out = 0;
/* Write a read status register command */
*(vu16 *)(FMI_Bank) = 0x70;
/* Wait until operation compeletion */
while((!((*(vu16 *)FMI_Bank) & 0x80))&&(Time_Out < TIMEOUT ))
{
Time_Out ++; /* Time Out */
}
/* Write a read array command */
*(vu16 *)FMI_Bank = 0xFF;
if (Time_Out == TIMEOUT)
{
return FMI_TIME_OUT_ERROR;
}
else
{
return FMI_NO_TIME_OUT_ERROR;
}
}
/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/