/*This file has been prepared for Doxygen automatic documentation generation.*/ | |
/*! \file ********************************************************************* | |
* | |
* \brief Power Manager driver. | |
* | |
* | |
* - Compiler: IAR EWAVR32 and GNU GCC for AVR32 | |
* - Supported devices: All AVR32 devices. | |
* - AppNote: | |
* | |
* \author Atmel Corporation: http://www.atmel.com \n | |
* Support and FAQ: http://support.atmel.no/ | |
* | |
*****************************************************************************/ | |
/* Copyright (c) 2007, Atmel Corporation All rights reserved. | |
* | |
* Redistribution and use in source and binary forms, with or without | |
* modification, are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* | |
* 3. The name of ATMEL may not be used to endorse or promote products derived | |
* from this software without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND | |
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, | |
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
*/ | |
#include "pm.h" | |
/*! \name PM Writable Bit-Field Registers | |
*/ | |
//! @{ | |
typedef union | |
{ | |
unsigned long mcctrl; | |
avr32_pm_mcctrl_t MCCTRL; | |
} u_avr32_pm_mcctrl_t; | |
typedef union | |
{ | |
unsigned long cksel; | |
avr32_pm_cksel_t CKSEL; | |
} u_avr32_pm_cksel_t; | |
typedef union | |
{ | |
unsigned long pll; | |
avr32_pm_pll_t PLL; | |
} u_avr32_pm_pll_t; | |
typedef union | |
{ | |
unsigned long oscctrl0; | |
avr32_pm_oscctrl0_t OSCCTRL0; | |
} u_avr32_pm_oscctrl0_t; | |
typedef union | |
{ | |
unsigned long oscctrl1; | |
avr32_pm_oscctrl1_t OSCCTRL1; | |
} u_avr32_pm_oscctrl1_t; | |
typedef union | |
{ | |
unsigned long oscctrl32; | |
avr32_pm_oscctrl32_t OSCCTRL32; | |
} u_avr32_pm_oscctrl32_t; | |
typedef union | |
{ | |
unsigned long ier; | |
avr32_pm_ier_t IER; | |
} u_avr32_pm_ier_t; | |
typedef union | |
{ | |
unsigned long idr; | |
avr32_pm_idr_t IDR; | |
} u_avr32_pm_idr_t; | |
typedef union | |
{ | |
unsigned long icr; | |
avr32_pm_icr_t ICR; | |
} u_avr32_pm_icr_t; | |
typedef union | |
{ | |
unsigned long gcctrl; | |
avr32_pm_gcctrl_t GCCTRL; | |
} u_avr32_pm_gcctrl_t; | |
typedef union | |
{ | |
unsigned long rccr; | |
avr32_pm_rccr_t RCCR; | |
} u_avr32_pm_rccr_t; | |
typedef union | |
{ | |
unsigned long bgcr; | |
avr32_pm_bgcr_t BGCR; | |
} u_avr32_pm_bgcr_t; | |
typedef union | |
{ | |
unsigned long vregcr; | |
avr32_pm_vregcr_t VREGCR; | |
} u_avr32_pm_vregcr_t; | |
typedef union | |
{ | |
unsigned long bod; | |
avr32_pm_bod_t BOD; | |
} u_avr32_pm_bod_t; | |
//! @} | |
/*! \brief Sets the mode of the oscillator 0. | |
* | |
* \param pm Base address of the Power Manager (i.e. &AVR32_PM). | |
* \param mode Oscillator 0 mode (i.e. AVR32_PM_OSCCTRL0_MODE_x). | |
*/ | |
static void pm_set_osc0_mode(volatile avr32_pm_t *pm, unsigned int mode) | |
{ | |
// Read | |
u_avr32_pm_oscctrl0_t u_avr32_pm_oscctrl0 = {pm->oscctrl0}; | |
// Modify | |
u_avr32_pm_oscctrl0.OSCCTRL0.mode = mode; | |
// Write | |
pm->oscctrl0 = u_avr32_pm_oscctrl0.oscctrl0; | |
} | |
void pm_enable_osc0_ext_clock(volatile avr32_pm_t *pm) | |
{ | |
pm_set_osc0_mode(pm, AVR32_PM_OSCCTRL0_MODE_EXT_CLOCK); | |
} | |
void pm_enable_osc0_crystal(volatile avr32_pm_t *pm, unsigned int fosc0) | |
{ | |
pm_set_osc0_mode(pm, (fosc0 < 8000000) ? AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G2 : | |
AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G3); | |
} | |
void pm_enable_clk0(volatile avr32_pm_t *pm, unsigned int startup) | |
{ | |
pm_enable_clk0_no_wait(pm, startup); | |
pm_wait_for_clk0_ready(pm); | |
} | |
void pm_disable_clk0(volatile avr32_pm_t *pm) | |
{ | |
pm->mcctrl &= ~AVR32_PM_MCCTRL_OSC0EN_MASK; | |
} | |
void pm_enable_clk0_no_wait(volatile avr32_pm_t *pm, unsigned int startup) | |
{ | |
// Read register | |
u_avr32_pm_oscctrl0_t u_avr32_pm_oscctrl0 = {pm->oscctrl0}; | |
// Modify | |
u_avr32_pm_oscctrl0.OSCCTRL0.startup = startup; | |
// Write back | |
pm->oscctrl0 = u_avr32_pm_oscctrl0.oscctrl0; | |
pm->mcctrl |= AVR32_PM_MCCTRL_OSC0EN_MASK; | |
} | |
void pm_wait_for_clk0_ready(volatile avr32_pm_t *pm) | |
{ | |
while (!(pm->poscsr & AVR32_PM_POSCSR_OSC0RDY_MASK)); | |
} | |
/*! \brief Sets the mode of the oscillator 1. | |
* | |
* \param pm Base address of the Power Manager (i.e. &AVR32_PM). | |
* \param mode Oscillator 1 mode (i.e. AVR32_PM_OSCCTRL1_MODE_x). | |
*/ | |
static void pm_set_osc1_mode(volatile avr32_pm_t *pm, unsigned int mode) | |
{ | |
// Read | |
u_avr32_pm_oscctrl1_t u_avr32_pm_oscctrl1 = {pm->oscctrl1}; | |
// Modify | |
u_avr32_pm_oscctrl1.OSCCTRL1.mode = mode; | |
// Write | |
pm->oscctrl1 = u_avr32_pm_oscctrl1.oscctrl1; | |
} | |
void pm_enable_osc1_ext_clock(volatile avr32_pm_t *pm) | |
{ | |
pm_set_osc1_mode(pm, AVR32_PM_OSCCTRL1_MODE_EXT_CLOCK); | |
} | |
void pm_enable_osc1_crystal(volatile avr32_pm_t *pm, unsigned int fosc1) | |
{ | |
pm_set_osc1_mode(pm, (fosc1 < 8000000) ? AVR32_PM_OSCCTRL1_MODE_CRYSTAL_G2 : | |
AVR32_PM_OSCCTRL1_MODE_CRYSTAL_G3); | |
} | |
void pm_enable_clk1(volatile avr32_pm_t *pm, unsigned int startup) | |
{ | |
pm_enable_clk1_no_wait(pm, startup); | |
pm_wait_for_clk1_ready(pm); | |
} | |
void pm_disable_clk1(volatile avr32_pm_t *pm) | |
{ | |
pm->mcctrl &= ~AVR32_PM_MCCTRL_OSC1EN_MASK; | |
} | |
void pm_enable_clk1_no_wait(volatile avr32_pm_t *pm, unsigned int startup) | |
{ | |
// Read register | |
u_avr32_pm_oscctrl1_t u_avr32_pm_oscctrl1 = {pm->oscctrl1}; | |
// Modify | |
u_avr32_pm_oscctrl1.OSCCTRL1.startup = startup; | |
// Write back | |
pm->oscctrl1 = u_avr32_pm_oscctrl1.oscctrl1; | |
pm->mcctrl |= AVR32_PM_MCCTRL_OSC1EN_MASK; | |
} | |
void pm_wait_for_clk1_ready(volatile avr32_pm_t *pm) | |
{ | |
while (!(pm->poscsr & AVR32_PM_POSCSR_OSC1RDY_MASK)); | |
} | |
/*! \brief Sets the mode of the 32-kHz oscillator. | |
* | |
* \param pm Base address of the Power Manager (i.e. &AVR32_PM). | |
* \param mode 32-kHz oscillator mode (i.e. AVR32_PM_OSCCTRL32_MODE_x). | |
*/ | |
static void pm_set_osc32_mode(volatile avr32_pm_t *pm, unsigned int mode) | |
{ | |
// Read | |
u_avr32_pm_oscctrl32_t u_avr32_pm_oscctrl32 = {pm->oscctrl32}; | |
// Modify | |
u_avr32_pm_oscctrl32.OSCCTRL32.mode = mode; | |
// Write | |
pm->oscctrl32 = u_avr32_pm_oscctrl32.oscctrl32; | |
} | |
void pm_enable_osc32_ext_clock(volatile avr32_pm_t *pm) | |
{ | |
pm_set_osc32_mode(pm, AVR32_PM_OSCCTRL32_MODE_EXT_CLOCK); | |
} | |
void pm_enable_osc32_crystal(volatile avr32_pm_t *pm) | |
{ | |
pm_set_osc32_mode(pm, AVR32_PM_OSCCTRL32_MODE_CRYSTAL); | |
} | |
void pm_enable_clk32(volatile avr32_pm_t *pm, unsigned int startup) | |
{ | |
pm_enable_clk32_no_wait(pm, startup); | |
pm_wait_for_clk32_ready(pm); | |
} | |
void pm_disable_clk32(volatile avr32_pm_t *pm) | |
{ | |
pm->oscctrl32 &= ~AVR32_PM_OSCCTRL32_OSC32EN_MASK; | |
} | |
void pm_enable_clk32_no_wait(volatile avr32_pm_t *pm, unsigned int startup) | |
{ | |
// Read register | |
u_avr32_pm_oscctrl32_t u_avr32_pm_oscctrl32 = {pm->oscctrl32}; | |
// Modify | |
u_avr32_pm_oscctrl32.OSCCTRL32.osc32en = 1; | |
u_avr32_pm_oscctrl32.OSCCTRL32.startup = startup; | |
// Write back | |
pm->oscctrl32 = u_avr32_pm_oscctrl32.oscctrl32; | |
} | |
void pm_wait_for_clk32_ready(volatile avr32_pm_t *pm) | |
{ | |
while (!(pm->poscsr & AVR32_PM_POSCSR_OSC32RDY_MASK)); | |
} | |
void pm_cksel(volatile avr32_pm_t *pm, | |
unsigned int pbadiv, | |
unsigned int pbasel, | |
unsigned int pbbdiv, | |
unsigned int pbbsel, | |
unsigned int hsbdiv, | |
unsigned int hsbsel) | |
{ | |
u_avr32_pm_cksel_t u_avr32_pm_cksel = {0}; | |
u_avr32_pm_cksel.CKSEL.cpusel = hsbsel; | |
u_avr32_pm_cksel.CKSEL.cpudiv = hsbdiv; | |
u_avr32_pm_cksel.CKSEL.hsbsel = hsbsel; | |
u_avr32_pm_cksel.CKSEL.hsbdiv = hsbdiv; | |
u_avr32_pm_cksel.CKSEL.pbasel = pbasel; | |
u_avr32_pm_cksel.CKSEL.pbadiv = pbadiv; | |
u_avr32_pm_cksel.CKSEL.pbbsel = pbbsel; | |
u_avr32_pm_cksel.CKSEL.pbbdiv = pbbdiv; | |
pm->cksel = u_avr32_pm_cksel.cksel; | |
// Wait for ckrdy bit and then clear it | |
while (!(pm->poscsr & AVR32_PM_POSCSR_CKRDY_MASK)); | |
} | |
void pm_gc_setup(volatile avr32_pm_t *pm, | |
unsigned int gc, | |
unsigned int osc_or_pll, // Use Osc (=0) or PLL (=1) | |
unsigned int pll_osc, // Sel Osc0/PLL0 or Osc1/PLL1 | |
unsigned int diven, | |
unsigned int div) | |
{ | |
u_avr32_pm_gcctrl_t u_avr32_pm_gcctrl = {0}; | |
u_avr32_pm_gcctrl.GCCTRL.oscsel = pll_osc; | |
u_avr32_pm_gcctrl.GCCTRL.pllsel = osc_or_pll; | |
u_avr32_pm_gcctrl.GCCTRL.diven = diven; | |
u_avr32_pm_gcctrl.GCCTRL.div = div; | |
pm->gcctrl[gc] = u_avr32_pm_gcctrl.gcctrl; | |
} | |
void pm_gc_enable(volatile avr32_pm_t *pm, | |
unsigned int gc) | |
{ | |
pm->gcctrl[gc] |= AVR32_PM_GCCTRL_CEN_MASK; | |
} | |
void pm_gc_disable(volatile avr32_pm_t *pm, | |
unsigned int gc) | |
{ | |
pm->gcctrl[gc] &= ~AVR32_PM_GCCTRL_CEN_MASK; | |
} | |
void pm_pll_setup(volatile avr32_pm_t *pm, | |
unsigned int pll, | |
unsigned int mul, | |
unsigned int div, | |
unsigned int osc, | |
unsigned int lockcount) | |
{ | |
u_avr32_pm_pll_t u_avr32_pm_pll = {0}; | |
u_avr32_pm_pll.PLL.pllosc = osc; | |
u_avr32_pm_pll.PLL.plldiv = div; | |
u_avr32_pm_pll.PLL.pllmul = mul; | |
u_avr32_pm_pll.PLL.pllcount = lockcount; | |
pm->pll[pll] = u_avr32_pm_pll.pll; | |
} | |
void pm_pll_set_option(volatile avr32_pm_t *pm, | |
unsigned int pll, | |
unsigned int pll_freq, | |
unsigned int pll_div2, | |
unsigned int pll_wbwdisable) | |
{ | |
u_avr32_pm_pll_t u_avr32_pm_pll = {pm->pll[pll]}; | |
u_avr32_pm_pll.PLL.pllopt = pll_freq | (pll_div2 << 1) | (pll_wbwdisable << 2); | |
pm->pll[pll] = u_avr32_pm_pll.pll; | |
} | |
unsigned int pm_pll_get_option(volatile avr32_pm_t *pm, | |
unsigned int pll) | |
{ | |
return (pm->pll[pll] & AVR32_PM_PLLOPT_MASK) >> AVR32_PM_PLLOPT_OFFSET; | |
} | |
void pm_pll_enable(volatile avr32_pm_t *pm, | |
unsigned int pll) | |
{ | |
pm->pll[pll] |= AVR32_PM_PLLEN_MASK; | |
} | |
void pm_pll_disable(volatile avr32_pm_t *pm, | |
unsigned int pll) | |
{ | |
pm->pll[pll] &= ~AVR32_PM_PLLEN_MASK; | |
} | |
void pm_wait_for_pll0_locked(volatile avr32_pm_t *pm) | |
{ | |
while (!(pm->poscsr & AVR32_PM_POSCSR_LOCK0_MASK)); | |
// Bypass the lock signal of the PLL | |
pm->pll[0] |= AVR32_PM_PLL0_PLLBPL_MASK; | |
} | |
void pm_wait_for_pll1_locked(volatile avr32_pm_t *pm) | |
{ | |
while (!(pm->poscsr & AVR32_PM_POSCSR_LOCK1_MASK)); | |
// Bypass the lock signal of the PLL | |
pm->pll[1] |= AVR32_PM_PLL1_PLLBPL_MASK; | |
} | |
void pm_switch_to_clock(volatile avr32_pm_t *pm, unsigned long clock) | |
{ | |
// Read | |
u_avr32_pm_mcctrl_t u_avr32_pm_mcctrl = {pm->mcctrl}; | |
// Modify | |
u_avr32_pm_mcctrl.MCCTRL.mcsel = clock; | |
// Write back | |
pm->mcctrl = u_avr32_pm_mcctrl.mcctrl; | |
} | |
void pm_switch_to_osc0(volatile avr32_pm_t *pm, unsigned int fosc0, unsigned int startup) | |
{ | |
pm_enable_osc0_crystal(pm, fosc0); // Enable the Osc0 in crystal mode | |
pm_enable_clk0(pm, startup); // Crystal startup time - This parameter is critical and depends on the characteristics of the crystal | |
pm_switch_to_clock(pm, AVR32_PM_MCSEL_OSC0); // Then switch main clock to Osc0 | |
} | |
void pm_bod_enable_irq(volatile avr32_pm_t *pm) | |
{ | |
pm->ier = AVR32_PM_IER_BODDET_MASK; | |
} | |
void pm_bod_disable_irq(volatile avr32_pm_t *pm) | |
{ | |
pm->idr = AVR32_PM_IDR_BODDET_MASK; | |
} | |
void pm_bod_clear_irq(volatile avr32_pm_t *pm) | |
{ | |
pm->icr = AVR32_PM_ICR_BODDET_MASK; | |
} | |
unsigned long pm_bod_get_irq_status(volatile avr32_pm_t *pm) | |
{ | |
return ((pm->isr & AVR32_PM_ISR_BODDET_MASK) != 0); | |
} | |
unsigned long pm_bod_get_irq_enable_bit(volatile avr32_pm_t *pm) | |
{ | |
return ((pm->imr & AVR32_PM_IMR_BODDET_MASK) != 0); | |
} | |
unsigned long pm_bod_get_level(volatile avr32_pm_t *pm) | |
{ | |
return (pm->bod & AVR32_PM_BOD_LEVEL_MASK) >> AVR32_PM_BOD_LEVEL_OFFSET; | |
} | |
void pm_write_gplp(volatile avr32_pm_t *pm,unsigned long gplp, unsigned long value) | |
{ | |
pm->gplp[gplp] = value; | |
} | |
unsigned long pm_read_gplp(volatile avr32_pm_t *pm,unsigned long gplp) | |
{ | |
return pm->gplp[gplp]; | |
} |