/**
 * \file
 *
 * Copyright (c) 2012 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */

#ifndef _SAM3S8_PIOA_INSTANCE_
#define _SAM3S8_PIOA_INSTANCE_

/* ========== Register definition for PIOA peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_PIOA_PER                (0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */
#define REG_PIOA_PDR                (0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */
#define REG_PIOA_PSR                (0x400E0E08U) /**< \brief (PIOA) PIO Status Register */
#define REG_PIOA_OER                (0x400E0E10U) /**< \brief (PIOA) Output Enable Register */
#define REG_PIOA_ODR                (0x400E0E14U) /**< \brief (PIOA) Output Disable Register */
#define REG_PIOA_OSR                (0x400E0E18U) /**< \brief (PIOA) Output Status Register */
#define REG_PIOA_IFER               (0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
#define REG_PIOA_IFDR               (0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
#define REG_PIOA_IFSR               (0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
#define REG_PIOA_SODR               (0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */
#define REG_PIOA_CODR               (0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */
#define REG_PIOA_ODSR               (0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */
#define REG_PIOA_PDSR               (0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */
#define REG_PIOA_IER                (0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */
#define REG_PIOA_IDR                (0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */
#define REG_PIOA_IMR                (0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */
#define REG_PIOA_ISR                (0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */
#define REG_PIOA_MDER               (0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */
#define REG_PIOA_MDDR               (0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */
#define REG_PIOA_MDSR               (0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */
#define REG_PIOA_PUDR               (0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */
#define REG_PIOA_PUER               (0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */
#define REG_PIOA_PUSR               (0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */
#define REG_PIOA_ABCDSR             (0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */
#define REG_PIOA_IFSCDR             (0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */
#define REG_PIOA_IFSCER             (0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */
#define REG_PIOA_IFSCSR             (0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */
#define REG_PIOA_SCDR               (0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
#define REG_PIOA_PPDDR              (0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */
#define REG_PIOA_PPDER              (0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */
#define REG_PIOA_PPDSR              (0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */
#define REG_PIOA_OWER               (0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */
#define REG_PIOA_OWDR               (0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */
#define REG_PIOA_OWSR               (0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */
#define REG_PIOA_AIMER              (0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
#define REG_PIOA_AIMDR              (0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */
#define REG_PIOA_AIMMR              (0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
#define REG_PIOA_ESR                (0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */
#define REG_PIOA_LSR                (0x400E0EC4U) /**< \brief (PIOA) Level Select Register */
#define REG_PIOA_ELSR               (0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */
#define REG_PIOA_FELLSR             (0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */
#define REG_PIOA_REHLSR             (0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */
#define REG_PIOA_FRLHSR             (0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
#define REG_PIOA_LOCKSR             (0x400E0EE0U) /**< \brief (PIOA) Lock Status */
#define REG_PIOA_WPMR               (0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */
#define REG_PIOA_WPSR               (0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */
#define REG_PIOA_SCHMITT            (0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */
#define REG_PIOA_PCMR               (0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */
#define REG_PIOA_PCIER              (0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */
#define REG_PIOA_PCIDR              (0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */
#define REG_PIOA_PCIMR              (0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */
#define REG_PIOA_PCISR              (0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */
#define REG_PIOA_PCRHR              (0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */
#define REG_PIOA_RPR                (0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */
#define REG_PIOA_RCR                (0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */
#define REG_PIOA_RNPR               (0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */
#define REG_PIOA_RNCR               (0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */
#define REG_PIOA_PTCR               (0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */
#define REG_PIOA_PTSR               (0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */
#else
#define REG_PIOA_PER       (*(WoReg*)0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */
#define REG_PIOA_PDR       (*(WoReg*)0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */
#define REG_PIOA_PSR       (*(RoReg*)0x400E0E08U) /**< \brief (PIOA) PIO Status Register */
#define REG_PIOA_OER       (*(WoReg*)0x400E0E10U) /**< \brief (PIOA) Output Enable Register */
#define REG_PIOA_ODR       (*(WoReg*)0x400E0E14U) /**< \brief (PIOA) Output Disable Register */
#define REG_PIOA_OSR       (*(RoReg*)0x400E0E18U) /**< \brief (PIOA) Output Status Register */
#define REG_PIOA_IFER      (*(WoReg*)0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
#define REG_PIOA_IFDR      (*(WoReg*)0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
#define REG_PIOA_IFSR      (*(RoReg*)0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
#define REG_PIOA_SODR      (*(WoReg*)0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */
#define REG_PIOA_CODR      (*(WoReg*)0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */
#define REG_PIOA_ODSR      (*(RwReg*)0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */
#define REG_PIOA_PDSR      (*(RoReg*)0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */
#define REG_PIOA_IER       (*(WoReg*)0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */
#define REG_PIOA_IDR       (*(WoReg*)0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */
#define REG_PIOA_IMR       (*(RoReg*)0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */
#define REG_PIOA_ISR       (*(RoReg*)0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */
#define REG_PIOA_MDER      (*(WoReg*)0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */
#define REG_PIOA_MDDR      (*(WoReg*)0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */
#define REG_PIOA_MDSR      (*(RoReg*)0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */
#define REG_PIOA_PUDR      (*(WoReg*)0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */
#define REG_PIOA_PUER      (*(WoReg*)0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */
#define REG_PIOA_PUSR      (*(RoReg*)0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */
#define REG_PIOA_ABCDSR    (*(RwReg*)0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */
#define REG_PIOA_IFSCDR    (*(WoReg*)0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */
#define REG_PIOA_IFSCER    (*(WoReg*)0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */
#define REG_PIOA_IFSCSR    (*(RoReg*)0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */
#define REG_PIOA_SCDR      (*(RwReg*)0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
#define REG_PIOA_PPDDR     (*(WoReg*)0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */
#define REG_PIOA_PPDER     (*(WoReg*)0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */
#define REG_PIOA_PPDSR     (*(RoReg*)0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */
#define REG_PIOA_OWER      (*(WoReg*)0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */
#define REG_PIOA_OWDR      (*(WoReg*)0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */
#define REG_PIOA_OWSR      (*(RoReg*)0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */
#define REG_PIOA_AIMER     (*(WoReg*)0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
#define REG_PIOA_AIMDR     (*(WoReg*)0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */
#define REG_PIOA_AIMMR     (*(RoReg*)0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
#define REG_PIOA_ESR       (*(WoReg*)0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */
#define REG_PIOA_LSR       (*(WoReg*)0x400E0EC4U) /**< \brief (PIOA) Level Select Register */
#define REG_PIOA_ELSR      (*(RoReg*)0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */
#define REG_PIOA_FELLSR    (*(WoReg*)0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */
#define REG_PIOA_REHLSR    (*(WoReg*)0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */
#define REG_PIOA_FRLHSR    (*(RoReg*)0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
#define REG_PIOA_LOCKSR    (*(RoReg*)0x400E0EE0U) /**< \brief (PIOA) Lock Status */
#define REG_PIOA_WPMR      (*(RwReg*)0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */
#define REG_PIOA_WPSR      (*(RoReg*)0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */
#define REG_PIOA_SCHMITT   (*(RwReg*)0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */
#define REG_PIOA_PCMR      (*(RwReg*)0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */
#define REG_PIOA_PCIER     (*(WoReg*)0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */
#define REG_PIOA_PCIDR     (*(WoReg*)0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */
#define REG_PIOA_PCIMR     (*(RoReg*)0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */
#define REG_PIOA_PCISR     (*(RoReg*)0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */
#define REG_PIOA_PCRHR     (*(RoReg*)0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */
#define REG_PIOA_RPR       (*(RwReg*)0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */
#define REG_PIOA_RCR       (*(RwReg*)0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */
#define REG_PIOA_RNPR      (*(RwReg*)0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */
#define REG_PIOA_RNCR      (*(RwReg*)0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */
#define REG_PIOA_PTCR      (*(WoReg*)0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */
#define REG_PIOA_PTSR      (*(RoReg*)0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#endif /* _SAM3S8_PIOA_INSTANCE_ */