#################################################################
# Makefile generated by Xilinx Platform Studio 
# Project:C:\E\temp\rc\3\V5.0.2\FreeRTOS\Demo\PPC405_Xilinx_Virtex4_GCC\system.xmp
#
# WARNING : This file will be re-generated every time a command
# to run a make target is invoked. So, any changes made to this  
# file manually, will be lost when make is invoked next. 
#################################################################

XILINX_EDK_DIR = /cygdrive/c/devtools/Xilinx/10.1/EDK
NON_CYG_XILINX_EDK_DIR = C:/devtools/Xilinx/10.1/EDK

SYSTEM = system

MHSFILE = system.mhs

MSSFILE = system.mss

FPGA_ARCH = virtex4

DEVICE = xc4vfx12ff668-10

LANGUAGE = vhdl

SEARCHPATHOPT = 

SUBMODULE_OPT = 

PLATGEN_OPTIONS = -p $(DEVICE) -lang $(LANGUAGE) $(SEARCHPATHOPT) $(SUBMODULE_OPT)

LIBGEN_OPTIONS = -mhs $(MHSFILE) -p $(DEVICE) $(SEARCHPATHOPT)

VPGEN_OPTIONS = -p $(DEVICE) $(SEARCHPATHOPT)

MANAGE_FASTRT_OPTIONS = -reduce_fanout no

OBSERVE_PAR_OPTIONS = -error yes

RTOSDEMO_OUTPUT_DIR = RTOSDemo
RTOSDEMO_OUTPUT = $(RTOSDEMO_OUTPUT_DIR)/executable.elf

MICROBLAZE_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/microblaze/mb_bootloop.elf
PPC405_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/ppc405/ppc_bootloop.elf
PPC440_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/ppc440/ppc440_bootloop.elf
BOOTLOOP_DIR = bootloops

PPC405_0_BOOTLOOP = $(BOOTLOOP_DIR)/ppc405_0.elf

BRAMINIT_ELF_FILES =  
BRAMINIT_ELF_FILE_ARGS =  

ALL_USER_ELF_FILES = $(RTOSDEMO_OUTPUT) 

SIM_CMD = vsim

BEHAVIORAL_SIM_SCRIPT = simulation/behavioral/$(SYSTEM)_setup.do

STRUCTURAL_SIM_SCRIPT = simulation/structural/$(SYSTEM)_setup.do

TIMING_SIM_SCRIPT = simulation/timing/$(SYSTEM)_setup.do

DEFAULT_SIM_SCRIPT = $(BEHAVIORAL_SIM_SCRIPT)

MIX_LANG_SIM_OPT = -mixed yes

SIMGEN_OPTIONS = -p $(DEVICE) -lang $(LANGUAGE) $(SEARCHPATHOPT) $(BRAMINIT_ELF_FILE_ARGS) $(MIX_LANG_SIM_OPT)  -s mti -X C:/E/temp/rc/3/V5.0.2/FreeRTOS/Demo/PPC405_Xilinx_Virtex4_GCC/ -E C:/E/temp/rc/3/V5.0.2/FreeRTOS/Demo/PPC405_Xilinx_Virtex4_GCC/


LIBRARIES =  \
       ppc405_0/lib/libxil.a 
VPEXEC = virtualplatform/vpexec.exe

LIBSCLEAN_TARGETS = ppc405_0_libsclean 

PROGRAMCLEAN_TARGETS = RTOSDemo_programclean 

CORE_STATE_DEVELOPMENT_FILES = 

WRAPPER_NGC_FILES = implementation/ppc405_0_wrapper.ngc \
implementation/jtagppc_0_wrapper.ngc \
implementation/plb_wrapper.ngc \
implementation/rs232_uart_wrapper.ngc \
implementation/leds_4bit_wrapper.ngc \
implementation/leds_positions_wrapper.ngc \
implementation/sysace_compactflash_wrapper.ngc \
implementation/sram_wrapper.ngc \
implementation/sram_util_bus_split_0_wrapper.ngc \
implementation/clock_generator_0_wrapper.ngc \
implementation/proc_sys_reset_0_wrapper.ngc \
implementation/xps_intc_0_wrapper.ngc

POSTSYN_NETLIST = implementation/$(SYSTEM).ngc

SYSTEM_BIT = implementation/$(SYSTEM).bit

DOWNLOAD_BIT = implementation/download.bit

SYSTEM_ACE = implementation/$(SYSTEM).ace

UCF_FILE = data/system.ucf

BMM_FILE = implementation/$(SYSTEM).bmm

BITGEN_UT_FILE = etc/bitgen.ut

XFLOW_OPT_FILE = etc/fast_runtime.opt
XFLOW_DEPENDENCY = __xps/xpsxflow.opt $(XFLOW_OPT_FILE)

XPLORER_DEPENDENCY = __xps/xplorer.opt
XPLORER_OPTIONS = -p $(DEVICE) -uc $(SYSTEM).ucf -bm $(SYSTEM).bmm -max_runs 7

FPGA_IMP_DEPENDENCY = $(BMM_FILE) $(POSTSYN_NETLIST) $(UCF_FILE) $(BITGEN_UT_FILE) $(XFLOW_DEPENDENCY)

#################################################################
# SOFTWARE APPLICATION RTOSDEMO
#################################################################

RTOSDEMO_SOURCES = RTOSDemo/../../Common/Minimal/BlockQ.c RTOSDemo/../../Common/Minimal/blocktim.c RTOSDemo/../../Common/Minimal/comtest.c RTOSDemo/../../Common/Minimal/countsem.c RTOSDemo/../../Common/Minimal/death.c RTOSDemo/../../Common/Minimal/dynamic.c RTOSDemo/../../Common/Minimal/flash.c RTOSDemo/../../Common/Minimal/GenQTest.c RTOSDemo/../../Common/Minimal/integer.c RTOSDemo/../../Common/Minimal/QPeek.c RTOSDemo/../../Common/Minimal/recmutex.c RTOSDemo/../../Common/Minimal/semtest.c RTOSDemo/../../../Source/tasks.c RTOSDemo/../../../Source/list.c RTOSDemo/../../../Source/queue.c RTOSDemo/../../../Source/portable/GCC/PPC405_Xilinx/port.c RTOSDemo/main.c RTOSDemo/serial/serial.c RTOSDemo/partest/partest.c RTOSDemo/../../../Source/portable/GCC/PPC405_Xilinx/portasm.S RTOSDemo/../../../Source/portable/MemMang/heap_2.c RTOSDemo/flop/flop.c RTOSDemo/flop/flop-reg-test.c

RTOSDEMO_HEADERS = RTOSDemo/FreeRTOSConfig.h 

RTOSDEMO_CC = powerpc-eabi-gcc
RTOSDEMO_CC_SIZE = powerpc-eabi-size
RTOSDEMO_CC_OPT = -O0
RTOSDEMO_CFLAGS = -I./RTOSDemo/flop -I../../Source/portable/GCC/PPC405_Xilinx -I./ppc405_0/include/  -IRTOSDemo/   -I. -I./RTOSDemo/ -I../Common/include/ -I../../Source/include/ -I./ppc405_0/include/ -I./ppc405_0/include -D GCC_PPC405 -mregnames
RTOSDEMO_CC_SEARCH = # -B
RTOSDEMO_LIBPATH = -L./ppc405_0/lib/ # -L
RTOSDEMO_INCLUDES = -I./ppc405_0/include/  -IRTOSDemo/ # -I
RTOSDEMO_LFLAGS = # -l
RTOSDEMO_LINKER_SCRIPT = RTOSDemo/RTOSDemo_linker_script.ld
RTOSDEMO_LINKER_SCRIPT_FLAG = -Wl,-T -Wl,$(RTOSDEMO_LINKER_SCRIPT) 
RTOSDEMO_CC_DEBUG_FLAG =  -g 
RTOSDEMO_CC_PROFILE_FLAG = # -pg
RTOSDEMO_CC_GLOBPTR_FLAG= # -msdata=eabi
RTOSDEMO_CC_INFERRED_FLAGS= 
RTOSDEMO_CC_START_ADDR_FLAG=  #  # -Wl,-defsym -Wl,_START_ADDR=
RTOSDEMO_CC_STACK_SIZE_FLAG=  #  # -Wl,-defsym -Wl,_STACK_SIZE=
RTOSDEMO_CC_HEAP_SIZE_FLAG=  #  # -Wl,-defsym -Wl,_HEAP_SIZE=
RTOSDEMO_OTHER_CC_FLAGS= $(RTOSDEMO_CC_GLOBPTR_FLAG)  \
                  $(RTOSDEMO_CC_START_ADDR_FLAG) $(RTOSDEMO_CC_STACK_SIZE_FLAG) $(RTOSDEMO_CC_HEAP_SIZE_FLAG)  \
                  $(RTOSDEMO_CC_INFERRED_FLAGS)  \
                  $(RTOSDEMO_LINKER_SCRIPT_FLAG) $(RTOSDEMO_CC_DEBUG_FLAG) $(RTOSDEMO_CC_PROFILE_FLAG)