FreeRTOS/Demo/AVR32_UC3/BOARDS/EVK1100/evk1100_revA.h - nest-detect/1.1/freertos - Git at Google

 /* This header file is part of the ATMEL AVR32-SoftwareFramework-AT32UC3-1.5.0 Release */

 /*This file is prepared for Doxygen automatic documentation generation.*/
 /*! \file *********************************************************************
  *
  * \brief AT32UC3A EVK1100 board header file.
  *
  * This file contains definitions and services related to the features of the
  * EVK1100 board rev. A.
  *
  * To use this board, define BOARD=EVK1100 and EVK1100_REVA.
  *
  * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
  * - Supported devices:  All AVR32 AT32UC3A devices can be used.
  * - AppNote:
  *
  * \author               Atmel Corporation: http://www.atmel.com \n
  *                       Support and FAQ: http://support.atmel.no/
  *
  ******************************************************************************/

 /* Copyright (c) 2009 Atmel Corporation. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * 1. Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * 3. The name of Atmel may not be used to endorse or promote products derived
  * from this software without specific prior written permission.
  *
  * 4. This software may only be redistributed and used in connection with an Atmel
  * AVR product.
  *
  * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
  * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
  *
  */

 #ifndef _EVK1100_REVA_H_
 #define _EVK1100_REVA_H_

 #include "compiler.h"

 #ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling.
 #  include "led.h"
 #endif  // __AVR32_ABI_COMPILER__


 /*! \name Oscillator Definitions
  */
 //! @{

 // RCOsc has no custom calibration by default. Set the following definition to
 // the appropriate value if a custom RCOsc calibration has been applied to your
 // part.
 //#define FRCOSC          AVR32_PM_RCOSC_FREQUENCY              //!< RCOsc frequency: Hz.

 #define FOSC32          32768                                 //!< Osc32 frequency: Hz.
 #define OSC32_STARTUP   AVR32_PM_OSCCTRL32_STARTUP_8192_RCOSC //!< Osc32 startup time: RCOsc periods.

 #define FOSC0           12000000                              //!< Osc0 frequency: Hz.
 #define OSC0_STARTUP    AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC  //!< Osc0 startup time: RCOsc periods.

 // Osc1 crystal is not mounted by default. Set the following definitions to the
 // appropriate values if a custom Osc1 crystal is mounted on your board.
 //#define FOSC1           12000000                              //!< Osc1 frequency: Hz.
 //#define OSC1_STARTUP    AVR32_PM_OSCCTRL1_STARTUP_2048_RCOSC  //!< Osc1 startup time: RCOsc periods.

 //! @}


 /*! \name SDRAM Definitions
  */
 //! @{

 //! Part header file of used SDRAM(s).
 #define SDRAM_PART_HDR  "MT48LC16M16A2TG7E/mt48lc16m16a2tg7e.h"

 //! Data bus width to use the SDRAM(s) with (16 or 32 bits; always 16 bits on
 //! UC3).
 #define SDRAM_DBW       16

 //! @}


 /*! \name USB Definitions
  */
 //! @{

 //! Multiplexed pin used for USB_ID: AVR32_USBB_USB_ID_x_x.
 //! To be selected according to the AVR32_USBB_USB_ID_x_x_PIN and
 //! AVR32_USBB_USB_ID_x_x_FUNCTION definitions from <avr32/uc3axxxx.h>.
 #define USB_ID                      AVR32_USBB_USB_ID_0_0

 //! Multiplexed pin used for USB_VBOF: AVR32_USBB_USB_VBOF_x_x.
 //! To be selected according to the AVR32_USBB_USB_VBOF_x_x_PIN and
 //! AVR32_USBB_USB_VBOF_x_x_FUNCTION definitions from <avr32/uc3axxxx.h>.
 #define USB_VBOF                    AVR32_USBB_USB_VBOF_0_0

 //! Active level of the USB_VBOF output pin.
 #define USB_VBOF_ACTIVE_LEVEL       HIGH

 //! USB overcurrent detection pin.
 #define USB_OVERCURRENT_DETECT_PIN  AVR32_PIN_PB18

 //! @}


 //! GPIO connection of the MAC PHY PWR_DOWN/INT signal.
 #define MACB_INTERRUPT_PIN  AVR32_PIN_PX12


 //! Number of LEDs.
 #define LED_COUNT   8

 /*! \name GPIO Connections of LEDs
  */
 //! @{
 #define LED0_GPIO   AVR32_PIN_PX13
 #define LED1_GPIO   AVR32_PIN_PX14
 #define LED2_GPIO   AVR32_PIN_PX15
 #define LED3_GPIO   AVR32_PIN_PX16
 #define LED4_GPIO   AVR32_PIN_PB19
 #define LED5_GPIO   AVR32_PIN_PB20
 #define LED6_GPIO   AVR32_PIN_PB21
 #define LED7_GPIO   AVR32_PIN_PB22
 //! @}

 /*! \name PWM Channels of LEDs
  */
 //! @{
 #define LED0_PWM    (-1)
 #define LED1_PWM    (-1)
 #define LED2_PWM    (-1)
 #define LED3_PWM    (-1)
 #define LED4_PWM      0
 #define LED5_PWM      1
 #define LED6_PWM      2
 #define LED7_PWM      3
 //! @}

 /*! \name PWM Functions of LEDs
  */
 //! @{
 #define LED0_PWM_FUNCTION   (-1)
 #define LED1_PWM_FUNCTION   (-1)
 #define LED2_PWM_FUNCTION   (-1)
 #define LED3_PWM_FUNCTION   (-1)
 #define LED4_PWM_FUNCTION   AVR32_PWM_0_FUNCTION
 #define LED5_PWM_FUNCTION   AVR32_PWM_1_FUNCTION
 #define LED6_PWM_FUNCTION   AVR32_PWM_2_FUNCTION
 #define LED7_PWM_FUNCTION   AVR32_PWM_3_FUNCTION
 //! @}

 /*! \name Color Identifiers of LEDs to Use with LED Functions
  */
 //! @{
 #define LED_MONO0_GREEN   LED4
 #define LED_MONO1_GREEN   LED5
 #define LED_MONO2_GREEN   LED6
 #define LED_MONO3_GREEN   LED7
 #define LED_BI0_GREEN     LED1
 #define LED_BI0_RED       LED0
 #define LED_BI1_GREEN     LED3
 #define LED_BI1_RED       LED2
 //! @}


 /*! \name GPIO Connections of Push Buttons
  */
 //! @{
 #define GPIO_PUSH_BUTTON_0            AVR32_PIN_PB28
 #define GPIO_PUSH_BUTTON_0_PRESSED    0
 #define GPIO_PUSH_BUTTON_1            AVR32_PIN_PB29
 #define GPIO_PUSH_BUTTON_1_PRESSED    0
 #define GPIO_PUSH_BUTTON_2            AVR32_PIN_PB27
 #define GPIO_PUSH_BUTTON_2_PRESSED    0
 //! @}


 /*! \name GPIO Connections of the Joystick
  */
 //! @{
 #define GPIO_JOYSTICK_PUSH            AVR32_PIN_PA20
 #define GPIO_JOYSTICK_PUSH_PRESSED    0
 #define GPIO_JOYSTICK_LEFT            AVR32_PIN_PA25
 #define GPIO_JOYSTICK_LEFT_PRESSED    0
 #define GPIO_JOYSTICK_RIGHT           AVR32_PIN_PA28
 #define GPIO_JOYSTICK_RIGHT_PRESSED   0
 #define GPIO_JOYSTICK_UP              AVR32_PIN_PA26
 #define GPIO_JOYSTICK_UP_PRESSED      0
 #define GPIO_JOYSTICK_DOWN            AVR32_PIN_PA27
 #define GPIO_JOYSTICK_DOWN_PRESSED    0
 //! @}


 /*! \name ADC Connection of the Potentiometer
  */
 //! @{
 #define ADC_POTENTIOMETER_CHANNEL   1
 #define ADC_POTENTIOMETER_PIN       AVR32_ADC_AD_1_PIN
 #define ADC_POTENTIOMETER_FUNCTION  AVR32_ADC_AD_1_FUNCTION
 //! @}


 /*! \name ADC Connection of the Temperature Sensor
  */
 //! @{
 #define ADC_TEMPERATURE_CHANNEL     0
 #define ADC_TEMPERATURE_PIN         AVR32_ADC_AD_0_PIN
 #define ADC_TEMPERATURE_FUNCTION    AVR32_ADC_AD_0_FUNCTION
 //! @}


 /*! \name ADC Connection of the Light Sensor
  */
 //! @{
 #define ADC_LIGHT_CHANNEL           2
 #define ADC_LIGHT_PIN               AVR32_ADC_AD_2_PIN
 #define ADC_LIGHT_FUNCTION          AVR32_ADC_AD_2_FUNCTION
 //! @}


 /*! \name SPI Connections of the DIP204 LCD
  */
 //! @{
 #define DIP204_SPI                  (&AVR32_SPI1)
 #define DIP204_SPI_NPCS             2
 #define DIP204_SPI_SCK_PIN          AVR32_SPI1_SCK_0_0_PIN
 #define DIP204_SPI_SCK_FUNCTION     AVR32_SPI1_SCK_0_0_FUNCTION
 #define DIP204_SPI_MISO_PIN         AVR32_SPI1_MISO_0_0_PIN
 #define DIP204_SPI_MISO_FUNCTION    AVR32_SPI1_MISO_0_0_FUNCTION
 #define DIP204_SPI_MOSI_PIN         AVR32_SPI1_MOSI_0_0_PIN
 #define DIP204_SPI_MOSI_FUNCTION    AVR32_SPI1_MOSI_0_0_FUNCTION
 #define DIP204_SPI_NPCS_PIN         AVR32_SPI1_NPCS_2_0_PIN
 #define DIP204_SPI_NPCS_FUNCTION    AVR32_SPI1_NPCS_2_0_FUNCTION
 //! @}

 /*! \name GPIO and PWM Connections of the DIP204 LCD Backlight
  */
 //! @{
 #define DIP204_BACKLIGHT_PIN        AVR32_PIN_PB18
 #define DIP204_PWM_CHANNEL          6
 #define DIP204_PWM_PIN              AVR32_PWM_6_PIN
 #define DIP204_PWM_FUNCTION         AVR32_PWM_6_FUNCTION
 //! @}


 /*! \name SPI Connections of the AT45DBX Data Flash Memory
  */
 //! @{
 #define AT45DBX_SPI                 (&AVR32_SPI1)
 #define AT45DBX_SPI_NPCS            0
 #define AT45DBX_SPI_SCK_PIN         AVR32_SPI1_SCK_0_0_PIN
 #define AT45DBX_SPI_SCK_FUNCTION    AVR32_SPI1_SCK_0_0_FUNCTION
 #define AT45DBX_SPI_MISO_PIN        AVR32_SPI1_MISO_0_0_PIN
 #define AT45DBX_SPI_MISO_FUNCTION   AVR32_SPI1_MISO_0_0_FUNCTION
 #define AT45DBX_SPI_MOSI_PIN        AVR32_SPI1_MOSI_0_0_PIN
 #define AT45DBX_SPI_MOSI_FUNCTION   AVR32_SPI1_MOSI_0_0_FUNCTION
 #define AT45DBX_SPI_NPCS0_PIN       AVR32_SPI1_NPCS_0_0_PIN
 #define AT45DBX_SPI_NPCS0_FUNCTION  AVR32_SPI1_NPCS_0_0_FUNCTION
 //! @}


 /*! \name GPIO and SPI Connections of the SD/MMC Connector
  */
 //! @{
 #define SD_MMC_CARD_DETECT_PIN      AVR32_PIN_PA02
 #define SD_MMC_WRITE_PROTECT_PIN    AVR32_PIN_PA07
 #define SD_MMC_SPI                  (&AVR32_SPI1)
 #define SD_MMC_SPI_NPCS             1
 #define SD_MMC_SPI_SCK_PIN          AVR32_SPI1_SCK_0_0_PIN
 #define SD_MMC_SPI_SCK_FUNCTION     AVR32_SPI1_SCK_0_0_FUNCTION
 #define SD_MMC_SPI_MISO_PIN         AVR32_SPI1_MISO_0_0_PIN
 #define SD_MMC_SPI_MISO_FUNCTION    AVR32_SPI1_MISO_0_0_FUNCTION
 #define SD_MMC_SPI_MOSI_PIN         AVR32_SPI1_MOSI_0_0_PIN
 #define SD_MMC_SPI_MOSI_FUNCTION    AVR32_SPI1_MOSI_0_0_FUNCTION
 #define SD_MMC_SPI_NPCS_PIN         AVR32_SPI1_NPCS_1_0_PIN
 #define SD_MMC_SPI_NPCS_FUNCTION    AVR32_SPI1_NPCS_1_0_FUNCTION
 //! @}


 /*! \name TWI Connections of the Spare TWI Connector
  */
 //! @{
 #define SPARE_TWI                   (&AVR32_TWI)
 #define SPARE_TWI_SCL_PIN           AVR32_TWI_SCL_0_0_PIN
 #define SPARE_TWI_SCL_FUNCTION      AVR32_TWI_SCL_0_0_FUNCTION
 #define SPARE_TWI_SDA_PIN           AVR32_TWI_SDA_0_0_PIN
 #define SPARE_TWI_SDA_FUNCTION      AVR32_TWI_SDA_0_0_FUNCTION
 //! @}


 /*! \name SPI Connections of the Spare SPI Connector
  */
 //! @{
 #define SPARE_SPI                   (&AVR32_SPI0)
 #define SPARE_SPI_NPCS              0
 #define SPARE_SPI_SCK_PIN           AVR32_SPI0_SCK_0_0_PIN
 #define SPARE_SPI_SCK_FUNCTION      AVR32_SPI0_SCK_0_0_FUNCTION
 #define SPARE_SPI_MISO_PIN          AVR32_SPI0_MISO_0_0_PIN
 #define SPARE_SPI_MISO_FUNCTION     AVR32_SPI0_MISO_0_0_FUNCTION
 #define SPARE_SPI_MOSI_PIN          AVR32_SPI0_MOSI_0_0_PIN
 #define SPARE_SPI_MOSI_FUNCTION     AVR32_SPI0_MOSI_0_0_FUNCTION
 #define SPARE_SPI_NPCS_PIN          AVR32_SPI0_NPCS_0_0_PIN
 #define SPARE_SPI_NPCS_FUNCTION     AVR32_SPI0_NPCS_0_0_FUNCTION
 //! @}


 #endif  // _EVK1100_REVA_H_
	/* This header file is part of the ATMEL AVR32-SoftwareFramework-AT32UC3-1.5.0 Release */

	/This file is prepared for Doxygen automatic documentation generation./
	/! \file ********************************************************************
	*
	* \brief AT32UC3A EVK1100 board header file.
	*
	* This file contains definitions and services related to the features of the
	* EVK1100 board rev. A.
	*
	* To use this board, define BOARD=EVK1100 and EVK1100_REVA.
	*
	* - Compiler: IAR EWAVR32 and GNU GCC for AVR32
	* - Supported devices: All AVR32 AT32UC3A devices can be used.
	* - AppNote:
	*
	* \author Atmel Corporation: http://www.atmel.com \n
	* Support and FAQ: http://support.atmel.no/
	*
	******************************************************************************/

	/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* 1. Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* 2. Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* 3. The name of Atmel may not be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* 4. This software may only be redistributed and used in connection with an Atmel
	* AVR product.
	*
	* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
	* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
	* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
	*
	*/

	#ifndef _EVK1100_REVA_H_
	#define _EVK1100_REVA_H_

	#include "compiler.h"

	#ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling.
	# include "led.h"
	#endif // __AVR32_ABI_COMPILER__


	/*! \name Oscillator Definitions
	*/
	//! @{

	// RCOsc has no custom calibration by default. Set the following definition to
	// the appropriate value if a custom RCOsc calibration has been applied to your
	// part.
	//#define FRCOSC AVR32_PM_RCOSC_FREQUENCY //!< RCOsc frequency: Hz.

	#define FOSC32 32768 //!< Osc32 frequency: Hz.
	#define OSC32_STARTUP AVR32_PM_OSCCTRL32_STARTUP_8192_RCOSC //!< Osc32 startup time: RCOsc periods.

	#define FOSC0 12000000 //!< Osc0 frequency: Hz.
	#define OSC0_STARTUP AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC //!< Osc0 startup time: RCOsc periods.

	// Osc1 crystal is not mounted by default. Set the following definitions to the
	// appropriate values if a custom Osc1 crystal is mounted on your board.
	//#define FOSC1 12000000 //!< Osc1 frequency: Hz.
	//#define OSC1_STARTUP AVR32_PM_OSCCTRL1_STARTUP_2048_RCOSC //!< Osc1 startup time: RCOsc periods.

	//! @}


	/*! \name SDRAM Definitions
	*/
	//! @{

	//! Part header file of used SDRAM(s).
	#define SDRAM_PART_HDR "MT48LC16M16A2TG7E/mt48lc16m16a2tg7e.h"

	//! Data bus width to use the SDRAM(s) with (16 or 32 bits; always 16 bits on
	//! UC3).
	#define SDRAM_DBW 16

	//! @}


	/*! \name USB Definitions
	*/
	//! @{

	//! Multiplexed pin used for USB_ID: AVR32_USBB_USB_ID_x_x.
	//! To be selected according to the AVR32_USBB_USB_ID_x_x_PIN and
	//! AVR32_USBB_USB_ID_x_x_FUNCTION definitions from <avr32/uc3axxxx.h>.
	#define USB_ID AVR32_USBB_USB_ID_0_0

	//! Multiplexed pin used for USB_VBOF: AVR32_USBB_USB_VBOF_x_x.
	//! To be selected according to the AVR32_USBB_USB_VBOF_x_x_PIN and
	//! AVR32_USBB_USB_VBOF_x_x_FUNCTION definitions from <avr32/uc3axxxx.h>.
	#define USB_VBOF AVR32_USBB_USB_VBOF_0_0

	//! Active level of the USB_VBOF output pin.
	#define USB_VBOF_ACTIVE_LEVEL HIGH

	//! USB overcurrent detection pin.
	#define USB_OVERCURRENT_DETECT_PIN AVR32_PIN_PB18

	//! @}


	//! GPIO connection of the MAC PHY PWR_DOWN/INT signal.
	#define MACB_INTERRUPT_PIN AVR32_PIN_PX12


	//! Number of LEDs.
	#define LED_COUNT 8

	/*! \name GPIO Connections of LEDs
	*/
	//! @{
	#define LED0_GPIO AVR32_PIN_PX13
	#define LED1_GPIO AVR32_PIN_PX14
	#define LED2_GPIO AVR32_PIN_PX15
	#define LED3_GPIO AVR32_PIN_PX16
	#define LED4_GPIO AVR32_PIN_PB19
	#define LED5_GPIO AVR32_PIN_PB20
	#define LED6_GPIO AVR32_PIN_PB21
	#define LED7_GPIO AVR32_PIN_PB22
	//! @}

	/*! \name PWM Channels of LEDs
	*/
	//! @{
	#define LED0_PWM (-1)
	#define LED1_PWM (-1)
	#define LED2_PWM (-1)
	#define LED3_PWM (-1)
	#define LED4_PWM 0
	#define LED5_PWM 1
	#define LED6_PWM 2
	#define LED7_PWM 3
	//! @}

	/*! \name PWM Functions of LEDs
	*/
	//! @{
	#define LED0_PWM_FUNCTION (-1)
	#define LED1_PWM_FUNCTION (-1)
	#define LED2_PWM_FUNCTION (-1)
	#define LED3_PWM_FUNCTION (-1)
	#define LED4_PWM_FUNCTION AVR32_PWM_0_FUNCTION
	#define LED5_PWM_FUNCTION AVR32_PWM_1_FUNCTION
	#define LED6_PWM_FUNCTION AVR32_PWM_2_FUNCTION
	#define LED7_PWM_FUNCTION AVR32_PWM_3_FUNCTION
	//! @}

	/*! \name Color Identifiers of LEDs to Use with LED Functions
	*/
	//! @{
	#define LED_MONO0_GREEN LED4
	#define LED_MONO1_GREEN LED5
	#define LED_MONO2_GREEN LED6
	#define LED_MONO3_GREEN LED7
	#define LED_BI0_GREEN LED1
	#define LED_BI0_RED LED0
	#define LED_BI1_GREEN LED3
	#define LED_BI1_RED LED2
	//! @}


	/*! \name GPIO Connections of Push Buttons
	*/
	//! @{
	#define GPIO_PUSH_BUTTON_0 AVR32_PIN_PB28
	#define GPIO_PUSH_BUTTON_0_PRESSED 0
	#define GPIO_PUSH_BUTTON_1 AVR32_PIN_PB29
	#define GPIO_PUSH_BUTTON_1_PRESSED 0
	#define GPIO_PUSH_BUTTON_2 AVR32_PIN_PB27
	#define GPIO_PUSH_BUTTON_2_PRESSED 0
	//! @}


	/*! \name GPIO Connections of the Joystick
	*/
	//! @{
	#define GPIO_JOYSTICK_PUSH AVR32_PIN_PA20
	#define GPIO_JOYSTICK_PUSH_PRESSED 0
	#define GPIO_JOYSTICK_LEFT AVR32_PIN_PA25
	#define GPIO_JOYSTICK_LEFT_PRESSED 0
	#define GPIO_JOYSTICK_RIGHT AVR32_PIN_PA28
	#define GPIO_JOYSTICK_RIGHT_PRESSED 0
	#define GPIO_JOYSTICK_UP AVR32_PIN_PA26
	#define GPIO_JOYSTICK_UP_PRESSED 0
	#define GPIO_JOYSTICK_DOWN AVR32_PIN_PA27
	#define GPIO_JOYSTICK_DOWN_PRESSED 0
	//! @}


	/*! \name ADC Connection of the Potentiometer
	*/
	//! @{
	#define ADC_POTENTIOMETER_CHANNEL 1
	#define ADC_POTENTIOMETER_PIN AVR32_ADC_AD_1_PIN
	#define ADC_POTENTIOMETER_FUNCTION AVR32_ADC_AD_1_FUNCTION
	//! @}


	/*! \name ADC Connection of the Temperature Sensor
	*/
	//! @{
	#define ADC_TEMPERATURE_CHANNEL 0
	#define ADC_TEMPERATURE_PIN AVR32_ADC_AD_0_PIN
	#define ADC_TEMPERATURE_FUNCTION AVR32_ADC_AD_0_FUNCTION
	//! @}


	/*! \name ADC Connection of the Light Sensor
	*/
	//! @{
	#define ADC_LIGHT_CHANNEL 2
	#define ADC_LIGHT_PIN AVR32_ADC_AD_2_PIN
	#define ADC_LIGHT_FUNCTION AVR32_ADC_AD_2_FUNCTION
	//! @}


	/*! \name SPI Connections of the DIP204 LCD
	*/
	//! @{
	#define DIP204_SPI (&AVR32_SPI1)
	#define DIP204_SPI_NPCS 2
	#define DIP204_SPI_SCK_PIN AVR32_SPI1_SCK_0_0_PIN
	#define DIP204_SPI_SCK_FUNCTION AVR32_SPI1_SCK_0_0_FUNCTION
	#define DIP204_SPI_MISO_PIN AVR32_SPI1_MISO_0_0_PIN
	#define DIP204_SPI_MISO_FUNCTION AVR32_SPI1_MISO_0_0_FUNCTION
	#define DIP204_SPI_MOSI_PIN AVR32_SPI1_MOSI_0_0_PIN
	#define DIP204_SPI_MOSI_FUNCTION AVR32_SPI1_MOSI_0_0_FUNCTION
	#define DIP204_SPI_NPCS_PIN AVR32_SPI1_NPCS_2_0_PIN
	#define DIP204_SPI_NPCS_FUNCTION AVR32_SPI1_NPCS_2_0_FUNCTION
	//! @}

	/*! \name GPIO and PWM Connections of the DIP204 LCD Backlight
	*/
	//! @{
	#define DIP204_BACKLIGHT_PIN AVR32_PIN_PB18
	#define DIP204_PWM_CHANNEL 6
	#define DIP204_PWM_PIN AVR32_PWM_6_PIN
	#define DIP204_PWM_FUNCTION AVR32_PWM_6_FUNCTION
	//! @}


	/*! \name SPI Connections of the AT45DBX Data Flash Memory
	*/
	//! @{
	#define AT45DBX_SPI (&AVR32_SPI1)
	#define AT45DBX_SPI_NPCS 0
	#define AT45DBX_SPI_SCK_PIN AVR32_SPI1_SCK_0_0_PIN
	#define AT45DBX_SPI_SCK_FUNCTION AVR32_SPI1_SCK_0_0_FUNCTION
	#define AT45DBX_SPI_MISO_PIN AVR32_SPI1_MISO_0_0_PIN
	#define AT45DBX_SPI_MISO_FUNCTION AVR32_SPI1_MISO_0_0_FUNCTION
	#define AT45DBX_SPI_MOSI_PIN AVR32_SPI1_MOSI_0_0_PIN
	#define AT45DBX_SPI_MOSI_FUNCTION AVR32_SPI1_MOSI_0_0_FUNCTION
	#define AT45DBX_SPI_NPCS0_PIN AVR32_SPI1_NPCS_0_0_PIN
	#define AT45DBX_SPI_NPCS0_FUNCTION AVR32_SPI1_NPCS_0_0_FUNCTION
	//! @}


	/*! \name GPIO and SPI Connections of the SD/MMC Connector
	*/
	//! @{
	#define SD_MMC_CARD_DETECT_PIN AVR32_PIN_PA02
	#define SD_MMC_WRITE_PROTECT_PIN AVR32_PIN_PA07
	#define SD_MMC_SPI (&AVR32_SPI1)
	#define SD_MMC_SPI_NPCS 1
	#define SD_MMC_SPI_SCK_PIN AVR32_SPI1_SCK_0_0_PIN
	#define SD_MMC_SPI_SCK_FUNCTION AVR32_SPI1_SCK_0_0_FUNCTION
	#define SD_MMC_SPI_MISO_PIN AVR32_SPI1_MISO_0_0_PIN
	#define SD_MMC_SPI_MISO_FUNCTION AVR32_SPI1_MISO_0_0_FUNCTION
	#define SD_MMC_SPI_MOSI_PIN AVR32_SPI1_MOSI_0_0_PIN
	#define SD_MMC_SPI_MOSI_FUNCTION AVR32_SPI1_MOSI_0_0_FUNCTION
	#define SD_MMC_SPI_NPCS_PIN AVR32_SPI1_NPCS_1_0_PIN
	#define SD_MMC_SPI_NPCS_FUNCTION AVR32_SPI1_NPCS_1_0_FUNCTION
	//! @}


	/*! \name TWI Connections of the Spare TWI Connector
	*/
	//! @{
	#define SPARE_TWI (&AVR32_TWI)
	#define SPARE_TWI_SCL_PIN AVR32_TWI_SCL_0_0_PIN
	#define SPARE_TWI_SCL_FUNCTION AVR32_TWI_SCL_0_0_FUNCTION
	#define SPARE_TWI_SDA_PIN AVR32_TWI_SDA_0_0_PIN
	#define SPARE_TWI_SDA_FUNCTION AVR32_TWI_SDA_0_0_FUNCTION
	//! @}


	/*! \name SPI Connections of the Spare SPI Connector
	*/
	//! @{
	#define SPARE_SPI (&AVR32_SPI0)
	#define SPARE_SPI_NPCS 0
	#define SPARE_SPI_SCK_PIN AVR32_SPI0_SCK_0_0_PIN
	#define SPARE_SPI_SCK_FUNCTION AVR32_SPI0_SCK_0_0_FUNCTION
	#define SPARE_SPI_MISO_PIN AVR32_SPI0_MISO_0_0_PIN
	#define SPARE_SPI_MISO_FUNCTION AVR32_SPI0_MISO_0_0_FUNCTION
	#define SPARE_SPI_MOSI_PIN AVR32_SPI0_MOSI_0_0_PIN
	#define SPARE_SPI_MOSI_FUNCTION AVR32_SPI0_MOSI_0_0_FUNCTION
	#define SPARE_SPI_NPCS_PIN AVR32_SPI0_NPCS_0_0_PIN
	#define SPARE_SPI_NPCS_FUNCTION AVR32_SPI0_NPCS_0_0_FUNCTION
	//! @}


	#endif // _EVK1100_REVA_H_