blob: 62c2d99012607c08c5f180dc9d835f2f28a2be3f [file] [log] [blame]
/**
* \file
*
* Copyright (c) 2012 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
#ifndef _SAM3SD8C_
#define _SAM3SD8C_
/** \addtogroup SAM3SD8C_definitions SAM3SD8C definitions
This file defines all structures and symbols for SAM3SD8C:
- registers and bitfields
- peripheral base address
- peripheral ID
- PIO definitions
*/
/*@{*/
#ifdef __cplusplus
extern "C" {
#endif
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#include <stdint.h>
#ifndef __cplusplus
typedef volatile const uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */
#else
typedef volatile uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */
#endif
typedef volatile uint32_t WoReg; /**< Write only 32-bit register (volatile unsigned int) */
typedef volatile uint32_t RwReg; /**< Read-Write 32-bit register (volatile unsigned int) */
#endif
/* ************************************************************************** */
/* CMSIS DEFINITIONS FOR SAM3SD8C */
/* ************************************************************************** */
/** \addtogroup SAM3SD8C_cmsis CMSIS Definitions */
/*@{*/
/**< Interrupt Number Definition */
typedef enum IRQn
{
/****** Cortex-M3 Processor Exceptions Numbers ******************************/
NonMaskableInt_IRQn = -14, /**< 2 Non Maskable Interrupt */
MemoryManagement_IRQn = -12, /**< 4 Cortex-M3 Memory Management Interrupt */
BusFault_IRQn = -11, /**< 5 Cortex-M3 Bus Fault Interrupt */
UsageFault_IRQn = -10, /**< 6 Cortex-M3 Usage Fault Interrupt */
SVCall_IRQn = -5, /**< 11 Cortex-M3 SV Call Interrupt */
DebugMonitor_IRQn = -4, /**< 12 Cortex-M3 Debug Monitor Interrupt */
PendSV_IRQn = -2, /**< 14 Cortex-M3 Pend SV Interrupt */
SysTick_IRQn = -1, /**< 15 Cortex-M3 System Tick Interrupt */
/****** SAM3SD8C specific Interrupt Numbers *********************************/
SUPC_IRQn = 0, /**< 0 SAM3SD8C Supply Controller (SUPC) */
RSTC_IRQn = 1, /**< 1 SAM3SD8C Reset Controller (RSTC) */
RTC_IRQn = 2, /**< 2 SAM3SD8C Real Time Clock (RTC) */
RTT_IRQn = 3, /**< 3 SAM3SD8C Real Time Timer (RTT) */
WDT_IRQn = 4, /**< 4 SAM3SD8C Watchdog Timer (WDT) */
PMC_IRQn = 5, /**< 5 SAM3SD8C Power Management Controller (PMC) */
EFC_IRQn = 6, /**< 6 SAM3SD8C Enhanced Embedded Flash Controller (EFC) */
UART0_IRQn = 8, /**< 8 SAM3SD8C UART 0 (UART0) */
UART1_IRQn = 9, /**< 9 SAM3SD8C UART 1 (UART1) */
SMC_IRQn = 10, /**< 10 SAM3SD8C Static Memory Controller (SMC) */
PIOA_IRQn = 11, /**< 11 SAM3SD8C Parallel I/O Controller A (PIOA) */
PIOB_IRQn = 12, /**< 12 SAM3SD8C Parallel I/O Controller B (PIOB) */
PIOC_IRQn = 13, /**< 13 SAM3SD8C Parallel I/O Controller C (PIOC) */
USART0_IRQn = 14, /**< 14 SAM3SD8C USART 0 (USART0) */
USART1_IRQn = 15, /**< 15 SAM3SD8C USART 1 (USART1) */
USART2_IRQn = 16, /**< 16 SAM3SD8C USART 2 (SAM3SD8 100 pins only) (USART2) */
HSMCI_IRQn = 18, /**< 18 SAM3SD8C Multimedia Card Interface (HSMCI) */
TWI0_IRQn = 19, /**< 19 SAM3SD8C Two Wire Interface 0 (TWI0) */
TWI1_IRQn = 20, /**< 20 SAM3SD8C Two Wire Interface 1 (TWI1) */
SPI_IRQn = 21, /**< 21 SAM3SD8C Serial Peripheral Interface (SPI) */
SSC_IRQn = 22, /**< 22 SAM3SD8C Synchronous Serial Controler (SSC) */
TC0_IRQn = 23, /**< 23 SAM3SD8C Timer/Counter 0 (TC0) */
TC1_IRQn = 24, /**< 24 SAM3SD8C Timer/Counter 1 (TC1) */
TC2_IRQn = 25, /**< 25 SAM3SD8C Timer/Counter 2 (TC2) */
TC3_IRQn = 26, /**< 26 SAM3SD8C Timer/Counter 3 (TC3) */
TC4_IRQn = 27, /**< 27 SAM3SD8C Timer/Counter 4 (TC4) */
TC5_IRQn = 28, /**< 28 SAM3SD8C Timer/Counter 5 (TC5) */
ADC_IRQn = 29, /**< 29 SAM3SD8C Analog To Digital Converter (ADC) */
DACC_IRQn = 30, /**< 30 SAM3SD8C Digital To Analog Converter (DACC) */
PWM_IRQn = 31, /**< 31 SAM3SD8C Pulse Width Modulation (PWM) */
CRCCU_IRQn = 32, /**< 32 SAM3SD8C CRC Calculation Unit (CRCCU) */
ACC_IRQn = 33, /**< 33 SAM3SD8C Analog Comparator (ACC) */
UDP_IRQn = 34 /**< 34 SAM3SD8C USB Device Port (UDP) */
} IRQn_Type;
typedef struct _DeviceVectors
{
/* Stack pointer */
void* pvStack;
/* Cortex-M handlers */
void* pfnReset_Handler;
void* pfnNMI_Handler;
void* pfnHardFault_Handler;
void* pfnMemManage_Handler;
void* pfnBusFault_Handler;
void* pfnUsageFault_Handler;
void* pfnReserved1_Handler;
void* pfnReserved2_Handler;
void* pfnReserved3_Handler;
void* pfnReserved4_Handler;
void* pfnSVC_Handler;
void* pfnDebugMon_Handler;
void* pfnReserved5_Handler;
void* pfnPendSV_Handler;
void* pfnSysTick_Handler;
/* Peripheral handlers */
void* pfnSUPC_Handler; /* 0 Supply Controller */
void* pfnRSTC_Handler; /* 1 Reset Controller */
void* pfnRTC_Handler; /* 2 Real Time Clock */
void* pfnRTT_Handler; /* 3 Real Time Timer */
void* pfnWDT_Handler; /* 4 Watchdog Timer */
void* pfnPMC_Handler; /* 5 Power Management Controller */
void* pfnEFC_Handler; /* 6 Enhanced Embedded Flash Controller */
void* pvReserved7;
void* pfnUART0_Handler; /* 8 UART 0 */
void* pfnUART1_Handler; /* 9 UART 1 */
void* pfnSMC_Handler; /* 10 Static Memory Controller */
void* pfnPIOA_Handler; /* 11 Parallel I/O Controller A */
void* pfnPIOB_Handler; /* 12 Parallel I/O Controller B */
void* pfnPIOC_Handler; /* 13 Parallel I/O Controller C */
void* pfnUSART0_Handler; /* 14 USART 0 */
void* pfnUSART1_Handler; /* 15 USART 1 */
void* pfnUSART2_Handler; /* 16 USART 2 (SAM3SD8 100 pins only) */
void* pvReserved17;
void* pfnHSMCI_Handler; /* 18 Multimedia Card Interface */
void* pfnTWI0_Handler; /* 19 Two Wire Interface 0 */
void* pfnTWI1_Handler; /* 20 Two Wire Interface 1 */
void* pfnSPI_Handler; /* 21 Serial Peripheral Interface */
void* pfnSSC_Handler; /* 22 Synchronous Serial Controler */
void* pfnTC0_Handler; /* 23 Timer/Counter 0 */
void* pfnTC1_Handler; /* 24 Timer/Counter 1 */
void* pfnTC2_Handler; /* 25 Timer/Counter 2 */
void* pfnTC3_Handler; /* 26 Timer/Counter 3 */
void* pfnTC4_Handler; /* 27 Timer/Counter 4 */
void* pfnTC5_Handler; /* 28 Timer/Counter 5 */
void* pfnADC_Handler; /* 29 Analog To Digital Converter */
void* pfnDACC_Handler; /* 30 Digital To Analog Converter */
void* pfnPWM_Handler; /* 31 Pulse Width Modulation */
void* pfnCRCCU_Handler; /* 32 CRC Calculation Unit */
void* pfnACC_Handler; /* 33 Analog Comparator */
void* pfnUDP_Handler; /* 34 USB Device Port */
} DeviceVectors;
/* Cortex-M3 core handlers */
void Reset_Handler ( void );
void NMI_Handler ( void );
void HardFault_Handler ( void );
void MemManage_Handler ( void );
void BusFault_Handler ( void );
void UsageFault_Handler ( void );
void SVC_Handler ( void );
void DebugMon_Handler ( void );
void PendSV_Handler ( void );
void SysTick_Handler ( void );
/* Peripherals handlers */
void ACC_Handler ( void );
void ADC_Handler ( void );
void CRCCU_Handler ( void );
void DACC_Handler ( void );
void EFC_Handler ( void );
void HSMCI_Handler ( void );
void PIOA_Handler ( void );
void PIOB_Handler ( void );
void PIOC_Handler ( void );
void PMC_Handler ( void );
void PWM_Handler ( void );
void RSTC_Handler ( void );
void RTC_Handler ( void );
void RTT_Handler ( void );
void SMC_Handler ( void );
void SPI_Handler ( void );
void SSC_Handler ( void );
void SUPC_Handler ( void );
void TC0_Handler ( void );
void TC1_Handler ( void );
void TC2_Handler ( void );
void TC3_Handler ( void );
void TC4_Handler ( void );
void TC5_Handler ( void );
void TWI0_Handler ( void );
void TWI1_Handler ( void );
void UART0_Handler ( void );
void UART1_Handler ( void );
void UDP_Handler ( void );
void USART0_Handler ( void );
void USART1_Handler ( void );
void USART2_Handler ( void );
void WDT_Handler ( void );
/**
* \brief Configuration of the Cortex-M3 Processor and Core Peripherals
*/
#define __CM3_REV 0x0200 /**< SAM3SD8C core revision number ([15:8] revision number, [7:0] patch number) */
#define __MPU_PRESENT 1 /**< SAM3SD8C does provide a MPU */
#define __NVIC_PRIO_BITS 4 /**< SAM3SD8C uses 4 Bits for the Priority Levels */
#define __Vendor_SysTickConfig 0 /**< Set to 1 if different SysTick Config is used */
/*
* \brief CMSIS includes
*/
#include <core_cm3.h>
#if !defined DONT_USE_CMSIS_INIT
#include "system_sam3sd8.h"
#endif /* DONT_USE_CMSIS_INIT */
/*@}*/
/* ************************************************************************** */
/** SOFTWARE PERIPHERAL API DEFINITION FOR SAM3SD8C */
/* ************************************************************************** */
/** \addtogroup SAM3SD8C_api Peripheral Software API */
/*@{*/
#include "component/component_acc.h"
#include "component/component_adc.h"
#include "component/component_chipid.h"
#include "component/component_crccu.h"
#include "component/component_dacc.h"
#include "component/component_efc.h"
#include "component/component_gpbr.h"
#include "component/component_hsmci.h"
#include "component/component_matrix.h"
#include "component/component_pdc.h"
#include "component/component_pio.h"
#include "component/component_pmc.h"
#include "component/component_pwm.h"
#include "component/component_rstc.h"
#include "component/component_rtc.h"
#include "component/component_rtt.h"
#include "component/component_smc.h"
#include "component/component_spi.h"
#include "component/component_ssc.h"
#include "component/component_supc.h"
#include "component/component_tc.h"
#include "component/component_twi.h"
#include "component/component_uart.h"
#include "component/component_udp.h"
#include "component/component_usart.h"
#include "component/component_wdt.h"
/*@}*/
/* ************************************************************************** */
/* REGISTER ACCESS DEFINITIONS FOR SAM3SD8C */
/* ************************************************************************** */
/** \addtogroup SAM3SD8C_reg Registers Access Definitions */
/*@{*/
#include "instance/instance_hsmci.h"
#include "instance/instance_ssc.h"
#include "instance/instance_spi.h"
#include "instance/instance_tc0.h"
#include "instance/instance_tc1.h"
#include "instance/instance_twi0.h"
#include "instance/instance_twi1.h"
#include "instance/instance_pwm.h"
#include "instance/instance_usart0.h"
#include "instance/instance_usart1.h"
#include "instance/instance_usart2.h"
#include "instance/instance_udp.h"
#include "instance/instance_adc.h"
#include "instance/instance_dacc.h"
#include "instance/instance_acc.h"
#include "instance/instance_crccu.h"
#include "instance/instance_smc.h"
#include "instance/instance_matrix.h"
#include "instance/instance_pmc.h"
#include "instance/instance_uart0.h"
#include "instance/instance_chipid.h"
#include "instance/instance_uart1.h"
#include "instance/instance_efc.h"
#include "instance/instance_pioa.h"
#include "instance/instance_piob.h"
#include "instance/instance_pioc.h"
#include "instance/instance_rstc.h"
#include "instance/instance_supc.h"
#include "instance/instance_rtt.h"
#include "instance/instance_wdt.h"
#include "instance/instance_rtc.h"
#include "instance/instance_gpbr.h"
/*@}*/
/* ************************************************************************** */
/* PERIPHERAL ID DEFINITIONS FOR SAM3SD8C */
/* ************************************************************************** */
/** \addtogroup SAM3SD8C_id Peripheral Ids Definitions */
/*@{*/
#define ID_SUPC ( 0) /**< \brief Supply Controller (SUPC) */
#define ID_RSTC ( 1) /**< \brief Reset Controller (RSTC) */
#define ID_RTC ( 2) /**< \brief Real Time Clock (RTC) */
#define ID_RTT ( 3) /**< \brief Real Time Timer (RTT) */
#define ID_WDT ( 4) /**< \brief Watchdog Timer (WDT) */
#define ID_PMC ( 5) /**< \brief Power Management Controller (PMC) */
#define ID_EFC ( 6) /**< \brief Enhanced Embedded Flash Controller (EFC) */
#define ID_UART0 ( 8) /**< \brief UART 0 (UART0) */
#define ID_UART1 ( 9) /**< \brief UART 1 (UART1) */
#define ID_SMC (10) /**< \brief Static Memory Controller (SMC) */
#define ID_PIOA (11) /**< \brief Parallel I/O Controller A (PIOA) */
#define ID_PIOB (12) /**< \brief Parallel I/O Controller B (PIOB) */
#define ID_PIOC (13) /**< \brief Parallel I/O Controller C (PIOC) */
#define ID_USART0 (14) /**< \brief USART 0 (USART0) */
#define ID_USART1 (15) /**< \brief USART 1 (USART1) */
#define ID_USART2 (16) /**< \brief USART 2 (SAM3SD8 100 pins only) (USART2) */
#define ID_HSMCI (18) /**< \brief Multimedia Card Interface (HSMCI) */
#define ID_TWI0 (19) /**< \brief Two Wire Interface 0 (TWI0) */
#define ID_TWI1 (20) /**< \brief Two Wire Interface 1 (TWI1) */
#define ID_SPI (21) /**< \brief Serial Peripheral Interface (SPI) */
#define ID_SSC (22) /**< \brief Synchronous Serial Controler (SSC) */
#define ID_TC0 (23) /**< \brief Timer/Counter 0 (TC0) */
#define ID_TC1 (24) /**< \brief Timer/Counter 1 (TC1) */
#define ID_TC2 (25) /**< \brief Timer/Counter 2 (TC2) */
#define ID_TC3 (26) /**< \brief Timer/Counter 3 (TC3) */
#define ID_TC4 (27) /**< \brief Timer/Counter 4 (TC4) */
#define ID_TC5 (28) /**< \brief Timer/Counter 5 (TC5) */
#define ID_ADC (29) /**< \brief Analog To Digital Converter (ADC) */
#define ID_DACC (30) /**< \brief Digital To Analog Converter (DACC) */
#define ID_PWM (31) /**< \brief Pulse Width Modulation (PWM) */
#define ID_CRCCU (32) /**< \brief CRC Calculation Unit (CRCCU) */
#define ID_ACC (33) /**< \brief Analog Comparator (ACC) */
#define ID_UDP (34) /**< \brief USB Device Port (UDP) */
/*@}*/
/* ************************************************************************** */
/* BASE ADDRESS DEFINITIONS FOR SAM3SD8C */
/* ************************************************************************** */
/** \addtogroup SAM3SD8C_base Peripheral Base Address Definitions */
/*@{*/
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define HSMCI (0x40000000U) /**< \brief (HSMCI ) Base Address */
#define PDC_HSMCI (0x40000100U) /**< \brief (PDC_HSMCI ) Base Address */
#define SSC (0x40004000U) /**< \brief (SSC ) Base Address */
#define PDC_SSC (0x40004100U) /**< \brief (PDC_SSC ) Base Address */
#define SPI (0x40008000U) /**< \brief (SPI ) Base Address */
#define PDC_SPI (0x40008100U) /**< \brief (PDC_SPI ) Base Address */
#define TC0 (0x40010000U) /**< \brief (TC0 ) Base Address */
#define TC1 (0x40014000U) /**< \brief (TC1 ) Base Address */
#define TWI0 (0x40018000U) /**< \brief (TWI0 ) Base Address */
#define PDC_TWI0 (0x40018100U) /**< \brief (PDC_TWI0 ) Base Address */
#define TWI1 (0x4001C000U) /**< \brief (TWI1 ) Base Address */
#define PDC_TWI1 (0x4001C100U) /**< \brief (PDC_TWI1 ) Base Address */
#define PWM (0x40020000U) /**< \brief (PWM ) Base Address */
#define PDC_PWM (0x40020100U) /**< \brief (PDC_PWM ) Base Address */
#define USART0 (0x40024000U) /**< \brief (USART0 ) Base Address */
#define PDC_USART0 (0x40024100U) /**< \brief (PDC_USART0) Base Address */
#define USART1 (0x40028000U) /**< \brief (USART1 ) Base Address */
#define PDC_USART1 (0x40028100U) /**< \brief (PDC_USART1) Base Address */
#define USART2 (0x4002C000U) /**< \brief (USART2 ) Base Address */
#define PDC_USART2 (0x4002C100U) /**< \brief (PDC_USART2) Base Address */
#define UDP (0x40034000U) /**< \brief (UDP ) Base Address */
#define ADC (0x40038000U) /**< \brief (ADC ) Base Address */
#define PDC_ADC (0x40038100U) /**< \brief (PDC_ADC ) Base Address */
#define DACC (0x4003C000U) /**< \brief (DACC ) Base Address */
#define PDC_DACC (0x4003C100U) /**< \brief (PDC_DACC ) Base Address */
#define ACC (0x40040000U) /**< \brief (ACC ) Base Address */
#define CRCCU (0x40044000U) /**< \brief (CRCCU ) Base Address */
#define SMC (0x400E0000U) /**< \brief (SMC ) Base Address */
#define MATRIX (0x400E0200U) /**< \brief (MATRIX ) Base Address */
#define PMC (0x400E0400U) /**< \brief (PMC ) Base Address */
#define UART0 (0x400E0600U) /**< \brief (UART0 ) Base Address */
#define PDC_UART0 (0x400E0700U) /**< \brief (PDC_UART0 ) Base Address */
#define CHIPID (0x400E0740U) /**< \brief (CHIPID ) Base Address */
#define UART1 (0x400E0800U) /**< \brief (UART1 ) Base Address */
#define PDC_UART1 (0x400E0900U) /**< \brief (PDC_UART1 ) Base Address */
#define EFC (0x400E0A00U) /**< \brief (EFC ) Base Address */
#define PIOA (0x400E0E00U) /**< \brief (PIOA ) Base Address */
#define PDC_PIOA (0x400E0F68U) /**< \brief (PDC_PIOA ) Base Address */
#define PIOB (0x400E1000U) /**< \brief (PIOB ) Base Address */
#define PIOC (0x400E1200U) /**< \brief (PIOC ) Base Address */
#define RSTC (0x400E1400U) /**< \brief (RSTC ) Base Address */
#define SUPC (0x400E1410U) /**< \brief (SUPC ) Base Address */
#define RTT (0x400E1430U) /**< \brief (RTT ) Base Address */
#define WDT (0x400E1450U) /**< \brief (WDT ) Base Address */
#define RTC (0x400E1460U) /**< \brief (RTC ) Base Address */
#define GPBR (0x400E1490U) /**< \brief (GPBR ) Base Address */
#else
#define HSMCI ((Hsmci *)0x40000000U) /**< \brief (HSMCI ) Base Address */
#define PDC_HSMCI ((Pdc *)0x40000100U) /**< \brief (PDC_HSMCI ) Base Address */
#define SSC ((Ssc *)0x40004000U) /**< \brief (SSC ) Base Address */
#define PDC_SSC ((Pdc *)0x40004100U) /**< \brief (PDC_SSC ) Base Address */
#define SPI ((Spi *)0x40008000U) /**< \brief (SPI ) Base Address */
#define PDC_SPI ((Pdc *)0x40008100U) /**< \brief (PDC_SPI ) Base Address */
#define TC0 ((Tc *)0x40010000U) /**< \brief (TC0 ) Base Address */
#define TC1 ((Tc *)0x40014000U) /**< \brief (TC1 ) Base Address */
#define TWI0 ((Twi *)0x40018000U) /**< \brief (TWI0 ) Base Address */
#define PDC_TWI0 ((Pdc *)0x40018100U) /**< \brief (PDC_TWI0 ) Base Address */
#define TWI1 ((Twi *)0x4001C000U) /**< \brief (TWI1 ) Base Address */
#define PDC_TWI1 ((Pdc *)0x4001C100U) /**< \brief (PDC_TWI1 ) Base Address */
#define PWM ((Pwm *)0x40020000U) /**< \brief (PWM ) Base Address */
#define PDC_PWM ((Pdc *)0x40020100U) /**< \brief (PDC_PWM ) Base Address */
#define USART0 ((Usart *)0x40024000U) /**< \brief (USART0 ) Base Address */
#define PDC_USART0 ((Pdc *)0x40024100U) /**< \brief (PDC_USART0) Base Address */
#define USART1 ((Usart *)0x40028000U) /**< \brief (USART1 ) Base Address */
#define PDC_USART1 ((Pdc *)0x40028100U) /**< \brief (PDC_USART1) Base Address */
#define USART2 ((Usart *)0x4002C000U) /**< \brief (USART2 ) Base Address */
#define PDC_USART2 ((Pdc *)0x4002C100U) /**< \brief (PDC_USART2) Base Address */
#define UDP ((Udp *)0x40034000U) /**< \brief (UDP ) Base Address */
#define ADC ((Adc *)0x40038000U) /**< \brief (ADC ) Base Address */
#define PDC_ADC ((Pdc *)0x40038100U) /**< \brief (PDC_ADC ) Base Address */
#define DACC ((Dacc *)0x4003C000U) /**< \brief (DACC ) Base Address */
#define PDC_DACC ((Pdc *)0x4003C100U) /**< \brief (PDC_DACC ) Base Address */
#define ACC ((Acc *)0x40040000U) /**< \brief (ACC ) Base Address */
#define CRCCU ((Crccu *)0x40044000U) /**< \brief (CRCCU ) Base Address */
#define SMC ((Smc *)0x400E0000U) /**< \brief (SMC ) Base Address */
#define MATRIX ((Matrix *)0x400E0200U) /**< \brief (MATRIX ) Base Address */
#define PMC ((Pmc *)0x400E0400U) /**< \brief (PMC ) Base Address */
#define UART0 ((Uart *)0x400E0600U) /**< \brief (UART0 ) Base Address */
#define PDC_UART0 ((Pdc *)0x400E0700U) /**< \brief (PDC_UART0 ) Base Address */
#define CHIPID ((Chipid *)0x400E0740U) /**< \brief (CHIPID ) Base Address */
#define UART1 ((Uart *)0x400E0800U) /**< \brief (UART1 ) Base Address */
#define PDC_UART1 ((Pdc *)0x400E0900U) /**< \brief (PDC_UART1 ) Base Address */
#define EFC ((Efc *)0x400E0A00U) /**< \brief (EFC ) Base Address */
#define PIOA ((Pio *)0x400E0E00U) /**< \brief (PIOA ) Base Address */
#define PDC_PIOA ((Pdc *)0x400E0F68U) /**< \brief (PDC_PIOA ) Base Address */
#define PIOB ((Pio *)0x400E1000U) /**< \brief (PIOB ) Base Address */
#define PIOC ((Pio *)0x400E1200U) /**< \brief (PIOC ) Base Address */
#define RSTC ((Rstc *)0x400E1400U) /**< \brief (RSTC ) Base Address */
#define SUPC ((Supc *)0x400E1410U) /**< \brief (SUPC ) Base Address */
#define RTT ((Rtt *)0x400E1430U) /**< \brief (RTT ) Base Address */
#define WDT ((Wdt *)0x400E1450U) /**< \brief (WDT ) Base Address */
#define RTC ((Rtc *)0x400E1460U) /**< \brief (RTC ) Base Address */
#define GPBR ((Gpbr *)0x400E1490U) /**< \brief (GPBR ) Base Address */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/*@}*/
/* ************************************************************************** */
/* PIO DEFINITIONS FOR SAM3SD8C */
/* ************************************************************************** */
/** \addtogroup SAM3SD8C_pio Peripheral Pio Definitions */
/*@{*/
#include "pio/pio_sam3sd8c.h"
/*@}*/
/* ************************************************************************** */
/* MEMORY MAPPING DEFINITIONS FOR SAM3SD8C */
/* ************************************************************************** */
#define IFLASH0_SIZE (0x40000u)
#define IFLASH0_PAGE_SIZE (256u)
#define IFLASH0_LOCK_REGION_SIZE (16384u)
#define IFLASH0_NB_OF_PAGES (1024u)
#define IFLASH0_NB_OF_LOCK_BITS (16u)
#define IFLASH1_SIZE (0x40000u)
#define IFLASH1_PAGE_SIZE (256u)
#define IFLASH1_LOCK_REGION_SIZE (16384u)
#define IFLASH1_NB_OF_PAGES (1024u)
#define IFLASH1_NB_OF_LOCK_BITS (16u)
#define IRAM_SIZE (0x10000u)
#define IFLASH_SIZE (IFLASH0_SIZE+IFLASH1_SIZE)
#define IFLASH_ADDR (0x00400000u) /**< Internal Flash base address */
#define IFLASH0_ADDR (0x00400000u) /**< Internal Flash 0 base address */
#define IROM_ADDR (0x00800000u) /**< Internal ROM base address */
#if defined IFLASH0_SIZE
#define IFLASH1_ADDR (IFLASH0_ADDR+IFLASH0_SIZE) /**< Internal Flash 1 base address */
#endif
#define IRAM_ADDR (0x20000000u) /**< Internal RAM base address */
#define EBI_CS0_ADDR (0x60000000u) /**< EBI Chip Select 0 base address */
#define EBI_CS1_ADDR (0x61000000u) /**< EBI Chip Select 1 base address */
#define EBI_CS2_ADDR (0x62000000u) /**< EBI Chip Select 2 base address */
#define EBI_CS3_ADDR (0x63000000u) /**< EBI Chip Select 3 base address */
/* ************************************************************************** */
/* ELECTRICAL DEFINITIONS FOR SAM3SD8C */
/* ************************************************************************** */
/* Device characteristics */
#define CHIP_FREQ_SLCK_RC_MIN (20000UL)
#define CHIP_FREQ_SLCK_RC (32000UL)
#define CHIP_FREQ_SLCK_RC_MAX (44000UL)
#define CHIP_FREQ_MAINCK_RC_4MHZ (4000000UL)
#define CHIP_FREQ_MAINCK_RC_8MHZ (8000000UL)
#define CHIP_FREQ_MAINCK_RC_12MHZ (12000000UL)
#define CHIP_FREQ_CPU_MAX (64000000UL)
#define CHIP_FREQ_XTAL_32K (32768UL)
#define CHIP_FREQ_XTAL_12M (12000000UL)
/* Embedded Flash Write Wait State */
#define CHIP_FLASH_WRITE_WAIT_STATE (6U)
/* Embedded Flash Read Wait State (VDDCORE set at 1.65V) */
#define CHIP_FREQ_FWS_0 (21000000UL) /**< \brief Maximum operating frequency when FWS is 0 */
#define CHIP_FREQ_FWS_1 (35000000UL) /**< \brief Maximum operating frequency when FWS is 1 */
#define CHIP_FREQ_FWS_2 (60000000UL) /**< \brief Maximum operating frequency when FWS is 2 */
#define CHIP_FREQ_FWS_3 (64000000UL) /**< \brief Maximum operating frequency when FWS is 3 */
#ifdef __cplusplus
}
#endif
/*@}*/
#endif /* _SAM3SD8C_ */