FreeRTOS/Demo/CORTEX_ATSAM3X_Atmel_Studio/src/asf/sam/utils/cmsis/sam3x/include/component/component_sdramc.h

/**
 * \file
 *
 * Copyright (c) 2012 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */

#ifndef _SAM3XA_SDRAMC_COMPONENT_
#define _SAM3XA_SDRAMC_COMPONENT_

/* ============================================================================= */
/**  SOFTWARE API DEFINITION FOR SDRAM Controller */
/* ============================================================================= */
/** \addtogroup SAM3XA_SDRAMC SDRAM Controller */
/*@{*/

#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
/** \brief Sdramc hardware registers */
typedef struct {
  RwReg SDRAMC_MR;    /**< \brief (Sdramc Offset: 0x00) SDRAMC Mode Register */
  RwReg SDRAMC_TR;    /**< \brief (Sdramc Offset: 0x04) SDRAMC Refresh Timer Register */
  RwReg SDRAMC_CR;    /**< \brief (Sdramc Offset: 0x08) SDRAMC Configuration Register */
  RoReg Reserved1[1];
  RwReg SDRAMC_LPR;   /**< \brief (Sdramc Offset: 0x10) SDRAMC Low Power Register */
  WoReg SDRAMC_IER;   /**< \brief (Sdramc Offset: 0x14) SDRAMC Interrupt Enable Register */
  WoReg SDRAMC_IDR;   /**< \brief (Sdramc Offset: 0x18) SDRAMC Interrupt Disable Register */
  RoReg SDRAMC_IMR;   /**< \brief (Sdramc Offset: 0x1C) SDRAMC Interrupt Mask Register */
  RoReg SDRAMC_ISR;   /**< \brief (Sdramc Offset: 0x20) SDRAMC Interrupt Status Register */
  RwReg SDRAMC_MDR;   /**< \brief (Sdramc Offset: 0x24) SDRAMC Memory Device Register */
  RwReg SDRAMC_CR1;   /**< \brief (Sdramc Offset: 0x28) SDRAMC Configuration Register 1 */
  RwReg SDRAMC_OCMS;  /**< \brief (Sdramc Offset: 0x2C) SDRAMC OCMS Register 1 */
} Sdramc;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- SDRAMC_MR : (SDRAMC Offset: 0x00) SDRAMC Mode Register -------- */
#define SDRAMC_MR_MODE_Pos 0
#define SDRAMC_MR_MODE_Msk (0x7u << SDRAMC_MR_MODE_Pos) /**< \brief (SDRAMC_MR) SDRAMC Command Mode */
#define   SDRAMC_MR_MODE_NORMAL (0x0u << 0) /**< \brief (SDRAMC_MR) Normal mode. Any access to the SDRAM is decoded normally. To activate this mode, command must be followed by a write to the SDRAM. */
#define   SDRAMC_MR_MODE_NOP (0x1u << 0) /**< \brief (SDRAMC_MR) The SDRAM Controller issues a NOP command when the SDRAM device is accessed regardless of the cycle. To activate this mode, command must be followed by a write to the SDRAM. */
#define   SDRAMC_MR_MODE_ALLBANKS_PRECHARGE (0x2u << 0) /**< \brief (SDRAMC_MR) The SDRAM Controller issues an "All Banks Precharge" command when the SDRAM device is accessed regardless of the cycle. To activate this mode, command must be followed by a write to the SDRAM. */
#define   SDRAMC_MR_MODE_LOAD_MODEREG (0x3u << 0) /**< \brief (SDRAMC_MR) The SDRAM Controller issues a "Load Mode Register" command when the SDRAM device is accessed regardless of the cycle. To activate this mode, command must be followed by a write to the SDRAM. */
#define   SDRAMC_MR_MODE_AUTO_REFRESH (0x4u << 0) /**< \brief (SDRAMC_MR) The SDRAM Controller issues an "Auto-Refresh" Command when the SDRAM device is accessed regardless of the cycle. Previously, an "All Banks Precharge" command must be issued. To activate this mode, command must be followed by a write to the SDRAM. */
#define   SDRAMC_MR_MODE_EXT_LOAD_MODEREG (0x5u << 0) /**< \brief (SDRAMC_MR) The SDRAM Controller issues an "Extended Load Mode Register" command when the SDRAM device is accessed regardless of the cycle. To activate this mode, the "Extended Load Mode Register" command must be followed by a write to the SDRAM. The write in the SDRAM must be done in the appropriate bank; most low-power SDRAM devices use the bank 1. */
#define   SDRAMC_MR_MODE_DEEP_POWERDOWN (0x6u << 0) /**< \brief (SDRAMC_MR) Deep power-down mode. Enters deep power-down mode. */
/* -------- SDRAMC_TR : (SDRAMC Offset: 0x04) SDRAMC Refresh Timer Register -------- */
#define SDRAMC_TR_COUNT_Pos 0
#define SDRAMC_TR_COUNT_Msk (0xfffu << SDRAMC_TR_COUNT_Pos) /**< \brief (SDRAMC_TR) SDRAMC Refresh Timer Count */
#define SDRAMC_TR_COUNT(value) ((SDRAMC_TR_COUNT_Msk & ((value) << SDRAMC_TR_COUNT_Pos)))
/* -------- SDRAMC_CR : (SDRAMC Offset: 0x08) SDRAMC Configuration Register -------- */
#define SDRAMC_CR_NC_Pos 0
#define SDRAMC_CR_NC_Msk (0x3u << SDRAMC_CR_NC_Pos) /**< \brief (SDRAMC_CR) Number of Column Bits */
#define   SDRAMC_CR_NC_COL8 (0x0u << 0) /**< \brief (SDRAMC_CR) 8 column bits */
#define   SDRAMC_CR_NC_COL9 (0x1u << 0) /**< \brief (SDRAMC_CR) 9 column bits */
#define   SDRAMC_CR_NC_COL10 (0x2u << 0) /**< \brief (SDRAMC_CR) 10 column bits */
#define   SDRAMC_CR_NC_COL11 (0x3u << 0) /**< \brief (SDRAMC_CR) 11 column bits */
#define SDRAMC_CR_NR_Pos 2
#define SDRAMC_CR_NR_Msk (0x3u << SDRAMC_CR_NR_Pos) /**< \brief (SDRAMC_CR) Number of Row Bits */
#define   SDRAMC_CR_NR_ROW11 (0x0u << 2) /**< \brief (SDRAMC_CR) 11 row bits */
#define   SDRAMC_CR_NR_ROW12 (0x1u << 2) /**< \brief (SDRAMC_CR) 12 row bits */
#define   SDRAMC_CR_NR_ROW13 (0x2u << 2) /**< \brief (SDRAMC_CR) 13 row bits */
#define SDRAMC_CR_NB (0x1u << 4) /**< \brief (SDRAMC_CR) Number of Banks */
#define   SDRAMC_CR_NB_BANK2 (0x0u << 4) /**< \brief (SDRAMC_CR) 2 banks */
#define   SDRAMC_CR_NB_BANK4 (0x1u << 4) /**< \brief (SDRAMC_CR) 4 banks */
#define SDRAMC_CR_CAS_Pos 5
#define SDRAMC_CR_CAS_Msk (0x3u << SDRAMC_CR_CAS_Pos) /**< \brief (SDRAMC_CR) CAS Latency */
#define   SDRAMC_CR_CAS_LATENCY1 (0x1u << 5) /**< \brief (SDRAMC_CR) 1 cycle CAS latency */
#define   SDRAMC_CR_CAS_LATENCY2 (0x2u << 5) /**< \brief (SDRAMC_CR) 2 cycle CAS latency */
#define   SDRAMC_CR_CAS_LATENCY3 (0x3u << 5) /**< \brief (SDRAMC_CR) 3 cycle CAS latency */
#define SDRAMC_CR_DBW (0x1u << 7) /**< \brief (SDRAMC_CR) Data Bus Width */
#define SDRAMC_CR_TWR_Pos 8
#define SDRAMC_CR_TWR_Msk (0xfu << SDRAMC_CR_TWR_Pos) /**< \brief (SDRAMC_CR) Write Recovery Delay */
#define SDRAMC_CR_TWR(value) ((SDRAMC_CR_TWR_Msk & ((value) << SDRAMC_CR_TWR_Pos)))
#define SDRAMC_CR_TRC_TRFC_Pos 12
#define SDRAMC_CR_TRC_TRFC_Msk (0xfu << SDRAMC_CR_TRC_TRFC_Pos) /**< \brief (SDRAMC_CR) Row Cycle Delay and Row Refresh Cycle */
#define SDRAMC_CR_TRC_TRFC(value) ((SDRAMC_CR_TRC_TRFC_Msk & ((value) << SDRAMC_CR_TRC_TRFC_Pos)))
#define SDRAMC_CR_TRP_Pos 16
#define SDRAMC_CR_TRP_Msk (0xfu << SDRAMC_CR_TRP_Pos) /**< \brief (SDRAMC_CR) Row Precharge Delay */
#define SDRAMC_CR_TRP(value) ((SDRAMC_CR_TRP_Msk & ((value) << SDRAMC_CR_TRP_Pos)))
#define SDRAMC_CR_TRCD_Pos 20
#define SDRAMC_CR_TRCD_Msk (0xfu << SDRAMC_CR_TRCD_Pos) /**< \brief (SDRAMC_CR) Row to Column Delay */
#define SDRAMC_CR_TRCD(value) ((SDRAMC_CR_TRCD_Msk & ((value) << SDRAMC_CR_TRCD_Pos)))
#define SDRAMC_CR_TRAS_Pos 24
#define SDRAMC_CR_TRAS_Msk (0xfu << SDRAMC_CR_TRAS_Pos) /**< \brief (SDRAMC_CR) Active to Precharge Delay */
#define SDRAMC_CR_TRAS(value) ((SDRAMC_CR_TRAS_Msk & ((value) << SDRAMC_CR_TRAS_Pos)))
#define SDRAMC_CR_TXSR_Pos 28
#define SDRAMC_CR_TXSR_Msk (0xfu << SDRAMC_CR_TXSR_Pos) /**< \brief (SDRAMC_CR) Exit Self Refresh to Active Delay */
#define SDRAMC_CR_TXSR(value) ((SDRAMC_CR_TXSR_Msk & ((value) << SDRAMC_CR_TXSR_Pos)))
/* -------- SDRAMC_LPR : (SDRAMC Offset: 0x10) SDRAMC Low Power Register -------- */
#define SDRAMC_LPR_LPCB_Pos 0
#define SDRAMC_LPR_LPCB_Msk (0x3u << SDRAMC_LPR_LPCB_Pos) /**< \brief (SDRAMC_LPR) Low-power Configuration Bits */
#define   SDRAMC_LPR_LPCB_DISABLED (0x0u << 0) /**< \brief (SDRAMC_LPR) Low Power Feature is inhibited: no Power-down, Self-refresh or Deep Power-down command is issued to the SDRAM device. */
#define   SDRAMC_LPR_LPCB_SELF_REFRESH (0x1u << 0) /**< \brief (SDRAMC_LPR) The SDRAM Controller issues a Self-refresh command to the SDRAM device, the SDCK clock is deactivated and the SDCKE signal is set low. The SDRAM device leaves the Self Refresh Mode when accessed and enters it after the access. */
#define   SDRAMC_LPR_LPCB_POWER_DOWN (0x2u << 0) /**< \brief (SDRAMC_LPR) The SDRAM Controller issues a Power-down Command to the SDRAM device after each access, the SDCKE signal is set to low. The SDRAM device leaves the Power-down Mode when accessed and enters it after the access. */
#define   SDRAMC_LPR_LPCB_DEEP_POWER_DOWN (0x3u << 0) /**< \brief (SDRAMC_LPR) The SDRAM Controller issues a Deep Power-down command to the SDRAM device. This mode is unique to low-power SDRAM. */
#define SDRAMC_LPR_PASR_Pos 4
#define SDRAMC_LPR_PASR_Msk (0x7u << SDRAMC_LPR_PASR_Pos) /**< \brief (SDRAMC_LPR) Partial Array Self-refresh (only for low-power SDRAM) */
#define SDRAMC_LPR_PASR(value) ((SDRAMC_LPR_PASR_Msk & ((value) << SDRAMC_LPR_PASR_Pos)))
#define SDRAMC_LPR_TCSR_Pos 8
#define SDRAMC_LPR_TCSR_Msk (0x3u << SDRAMC_LPR_TCSR_Pos) /**< \brief (SDRAMC_LPR) Temperature Compensated Self-Refresh (only for low-power SDRAM) */
#define SDRAMC_LPR_TCSR(value) ((SDRAMC_LPR_TCSR_Msk & ((value) << SDRAMC_LPR_TCSR_Pos)))
#define SDRAMC_LPR_DS_Pos 10
#define SDRAMC_LPR_DS_Msk (0x3u << SDRAMC_LPR_DS_Pos) /**< \brief (SDRAMC_LPR) Drive Strength (only for low-power SDRAM) */
#define SDRAMC_LPR_DS(value) ((SDRAMC_LPR_DS_Msk & ((value) << SDRAMC_LPR_DS_Pos)))
#define SDRAMC_LPR_TIMEOUT_Pos 12
#define SDRAMC_LPR_TIMEOUT_Msk (0x3u << SDRAMC_LPR_TIMEOUT_Pos) /**< \brief (SDRAMC_LPR) Time to define when low-power mode is enable */
#define   SDRAMC_LPR_TIMEOUT_LP_LAST_XFER (0x0u << 12) /**< \brief (SDRAMC_LPR) The SDRAM controller activates the SDRAM low-power mode immediately after the end of the last transfer. */
#define   SDRAMC_LPR_TIMEOUT_LP_LAST_XFER_64 (0x1u << 12) /**< \brief (SDRAMC_LPR) The SDRAM controller activates the SDRAM low-power mode 64 clock cycles after the end of the last transfer. */
#define   SDRAMC_LPR_TIMEOUT_LP_LAST_XFER_128 (0x2u << 12) /**< \brief (SDRAMC_LPR) The SDRAM controller activates the SDRAM low-power mode 128 clock cycles after the end of the last transfer. */
/* -------- SDRAMC_IER : (SDRAMC Offset: 0x14) SDRAMC Interrupt Enable Register -------- */
#define SDRAMC_IER_RES (0x1u << 0) /**< \brief (SDRAMC_IER) Refresh Error Status */
/* -------- SDRAMC_IDR : (SDRAMC Offset: 0x18) SDRAMC Interrupt Disable Register -------- */
#define SDRAMC_IDR_RES (0x1u << 0) /**< \brief (SDRAMC_IDR) Refresh Error Status */
/* -------- SDRAMC_IMR : (SDRAMC Offset: 0x1C) SDRAMC Interrupt Mask Register -------- */
#define SDRAMC_IMR_RES (0x1u << 0) /**< \brief (SDRAMC_IMR) Refresh Error Status */
/* -------- SDRAMC_ISR : (SDRAMC Offset: 0x20) SDRAMC Interrupt Status Register -------- */
#define SDRAMC_ISR_RES (0x1u << 0) /**< \brief (SDRAMC_ISR) Refresh Error Status */
/* -------- SDRAMC_MDR : (SDRAMC Offset: 0x24) SDRAMC Memory Device Register -------- */
#define SDRAMC_MDR_MD_Pos 0
#define SDRAMC_MDR_MD_Msk (0x3u << SDRAMC_MDR_MD_Pos) /**< \brief (SDRAMC_MDR) Memory Device Type */
#define   SDRAMC_MDR_MD_SDRAM (0x0u << 0) /**< \brief (SDRAMC_MDR) SDRAM */
#define   SDRAMC_MDR_MD_LPSDRAM (0x1u << 0) /**< \brief (SDRAMC_MDR) Low-power SDRAM */
/* -------- SDRAMC_CR1 : (SDRAMC Offset: 0x28) SDRAMC Configuration Register 1 -------- */
#define SDRAMC_CR1_NC_Pos 0
#define SDRAMC_CR1_NC_Msk (0x3u << SDRAMC_CR1_NC_Pos) /**< \brief (SDRAMC_CR1) Number of Column Bits */
#define   SDRAMC_CR1_NC_COL8 (0x0u << 0) /**< \brief (SDRAMC_CR1) 8 column bits */
#define   SDRAMC_CR1_NC_COL9 (0x1u << 0) /**< \brief (SDRAMC_CR1) 9 column bits */
#define   SDRAMC_CR1_NC_COL10 (0x2u << 0) /**< \brief (SDRAMC_CR1) 10 column bits */
#define   SDRAMC_CR1_NC_COL11 (0x3u << 0) /**< \brief (SDRAMC_CR1) 11 column bits */
#define SDRAMC_CR1_NR_Pos 2
#define SDRAMC_CR1_NR_Msk (0x3u << SDRAMC_CR1_NR_Pos) /**< \brief (SDRAMC_CR1) Number of Row Bits */
#define   SDRAMC_CR1_NR_ROW11 (0x0u << 2) /**< \brief (SDRAMC_CR1) 11 row bits */
#define   SDRAMC_CR1_NR_ROW12 (0x1u << 2) /**< \brief (SDRAMC_CR1) 12 row bits */
#define   SDRAMC_CR1_NR_ROW13 (0x2u << 2) /**< \brief (SDRAMC_CR1) 13 row bits */
#define SDRAMC_CR1_NB (0x1u << 4) /**< \brief (SDRAMC_CR1) Number of Banks */
#define   SDRAMC_CR1_NB_BANK2 (0x0u << 4) /**< \brief (SDRAMC_CR1) 2 banks */
#define   SDRAMC_CR1_NB_BANK4 (0x1u << 4) /**< \brief (SDRAMC_CR1) 4 banks */
#define SDRAMC_CR1_CAS_Pos 5
#define SDRAMC_CR1_CAS_Msk (0x3u << SDRAMC_CR1_CAS_Pos) /**< \brief (SDRAMC_CR1) CAS Latency */
#define   SDRAMC_CR1_CAS_LATENCY1 (0x1u << 5) /**< \brief (SDRAMC_CR1) 1 cycle CAS latency */
#define   SDRAMC_CR1_CAS_LATENCY2 (0x2u << 5) /**< \brief (SDRAMC_CR1) 2 cycle CAS latency */
#define   SDRAMC_CR1_CAS_LATENCY3 (0x3u << 5) /**< \brief (SDRAMC_CR1) 3 cycle CAS latency */
#define SDRAMC_CR1_DBW (0x1u << 7) /**< \brief (SDRAMC_CR1) Data Bus Width */
#define SDRAMC_CR1_TWR_Pos 8
#define SDRAMC_CR1_TWR_Msk (0xfu << SDRAMC_CR1_TWR_Pos) /**< \brief (SDRAMC_CR1) Write Recovery Delay */
#define SDRAMC_CR1_TWR(value) ((SDRAMC_CR1_TWR_Msk & ((value) << SDRAMC_CR1_TWR_Pos)))
#define SDRAMC_CR1_TRC_TRFC_Pos 12
#define SDRAMC_CR1_TRC_TRFC_Msk (0xfu << SDRAMC_CR1_TRC_TRFC_Pos) /**< \brief (SDRAMC_CR1) Row Cycle Delay and Row Refresh Cycle */
#define SDRAMC_CR1_TRC_TRFC(value) ((SDRAMC_CR1_TRC_TRFC_Msk & ((value) << SDRAMC_CR1_TRC_TRFC_Pos)))
#define SDRAMC_CR1_TRP_Pos 16
#define SDRAMC_CR1_TRP_Msk (0xfu << SDRAMC_CR1_TRP_Pos) /**< \brief (SDRAMC_CR1) Row Precharge Delay */
#define SDRAMC_CR1_TRP(value) ((SDRAMC_CR1_TRP_Msk & ((value) << SDRAMC_CR1_TRP_Pos)))
#define SDRAMC_CR1_TRCD_Pos 20
#define SDRAMC_CR1_TRCD_Msk (0xfu << SDRAMC_CR1_TRCD_Pos) /**< \brief (SDRAMC_CR1) Row to Column Delay */
#define SDRAMC_CR1_TRCD(value) ((SDRAMC_CR1_TRCD_Msk & ((value) << SDRAMC_CR1_TRCD_Pos)))
#define SDRAMC_CR1_TRAS_Pos 24
#define SDRAMC_CR1_TRAS_Msk (0xfu << SDRAMC_CR1_TRAS_Pos) /**< \brief (SDRAMC_CR1) Active to Precharge Delay */
#define SDRAMC_CR1_TRAS(value) ((SDRAMC_CR1_TRAS_Msk & ((value) << SDRAMC_CR1_TRAS_Pos)))
#define SDRAMC_CR1_TXSR_Pos 28
#define SDRAMC_CR1_TXSR_Msk (0xfu << SDRAMC_CR1_TXSR_Pos) /**< \brief (SDRAMC_CR1) Exit Self Refresh to Active Delay */
#define SDRAMC_CR1_TXSR(value) ((SDRAMC_CR1_TXSR_Msk & ((value) << SDRAMC_CR1_TXSR_Pos)))
/* -------- SDRAMC_OCMS : (SDRAMC Offset: 0x2C) SDRAMC OCMS Register 1 -------- */
#define SDRAMC_OCMS_SDR_SE (0x1u << 0) /**< \brief (SDRAMC_OCMS) SDRAM Memory Controller Scrambling Enable */

/*@}*/


#endif /* _SAM3XA_SDRAMC_COMPONENT_ */