FreeRTOS/Demo/CORTEX_ATSAM3S-EK2_Atmel_Studio/src/asf/sam/boards/sam3s_ek2/sam3s_ek2.h

/**
 * \file
 *
 * \brief SAM3S-EK2 Board Definition.
 *
 * Copyright (c) 2011 - 2012 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */

#ifndef _SAM3S_EK2_H_
#define _SAM3S_EK2_H_

#include "compiler.h"
#include "system_sam3sd8.h"
#include "exceptions.h"

/*
#define BOARD_REV_A
*/
#define BOARD_REV_B

/*----------------------------------------------------------------------------*/
/**
 *  \page sam3s_ek_opfreq "SAM3S-EK2 - Operating frequencies"
 *  This page lists several definition related to the board operating frequency
 *
 *  \section Definitions
 *  - \ref BOARD_FREQ_*
 *  - \ref BOARD_MCK
 */

/** Board oscillator settings */
#define BOARD_FREQ_SLCK_XTAL		(32768U)
#define BOARD_FREQ_SLCK_BYPASS		(32768U)
#define BOARD_FREQ_MAINCK_XTAL		(12000000U)
#define BOARD_FREQ_MAINCK_BYPASS	(12000000U)

/** Master clock frequency */
#define BOARD_MCK					CHIP_FREQ_CPU_MAX

/*----------------------------------------------------------------------------*/
/**
 * \page sam3s_ek_board_info "SAM3S-EK2 - Board informations"
 * This page lists several definition related to the board description.
 *
 * \section Definitions
 * - \ref BOARD_NAME
 */

/** Name of the board */
#define BOARD_NAME "SAM3S-EK2"
/** Board definition */
#define sam3sek2
/** Family definition (already defined) */
#define sam3sd8
/** Core definition */
#define cortexm3

/*----------------------------------------------------------------------------*/
/**
 * \page sam3s_ek_piodef "SAM3S-EK - PIO definitions"
 * This pages lists all the pio definitions. The constants
 * are named using the following convention: PIN_* for a constant which defines
 * a single Pin instance (but may include several PIOs sharing the same
 * controller), and PINS_* for a list of Pin instances.
 *
 * ADC
 * - \ref PIN_ADC0_AD0
 * - \ref PIN_ADC0_AD1
 * - \ref PIN_ADC0_AD2
 * - \ref PIN_ADC0_AD3
 * - \ref PIN_ADC0_AD4
 * - \ref PIN_ADC0_AD5
 * - \ref PIN_ADC0_AD6
 * - \ref PIN_ADC0_AD7
 * - \ref PINS_ADC
 *
 * UART
 * - \ref PINS_UART
 *
 * EBI
 * - \ref PIN_EBI_DATA_BUS
 * - \ref PIN_EBI_NRD
 * - \ref PIN_EBI_NWE
 * - \ref PIN_EBI_NCS0
 * - \ref PIN_EBI_PSRAM_ADDR_BUS
 * - \ref PIN_EBI_PSRAM_NBS
 * - \ref PIN_EBI_A1
 * - \ref PIN_EBI_NCS1
 * - \ref PIN_EBI_LCD_RS
 *
 * LEDs
 * - \ref PIN_LED_0
 * - \ref PIN_LED_1
 * - \ref PIN_LED_2
 * - \ref PINS_LEDS
 *
 * HSMCI
 * - \ref PINS_HSMCI
 *
 * Push buttons
 * - \ref PIN_PUSHBUTTON_1
 * - \ref PIN_PUSHBUTTON_2
 * - \ref PINS_PUSHBUTTONS
 * - \ref PUSHBUTTON_BP1
 * - \ref PUSHBUTTON_BP2
 *
 * PWMC
 * - \ref PIN_PWMC_PWMH0
 * - \ref PIN_PWMC_PWML0
 * - \ref PIN_PWMC_PWMH1
 * - \ref PIN_PWMC_PWML1
 * - \ref PIN_PWMC_PWMH2
 * - \ref PIN_PWMC_PWML2
 * - \ref PIN_PWMC_PWMH3
 * - \ref PIN_PWMC_PWML3
 * - \ref PIN_PWM_LED0
 * - \ref PIN_PWM_LED1
 * - \ref PIN_PWM_LED2
 * - \ref CHANNEL_PWM_LED0
 * - \ref CHANNEL_PWM_LED1
 * - \ref CHANNEL_PWM_LED2
 *
 * SPI
 * - \ref PIN_SPI_MISO
 * - \ref PIN_SPI_MOSI
 * - \ref PIN_SPI_SPCK
 * - \ref PINS_SPI
 * - \ref PIN_SPI_NPCS0_PA11
 *
 * SSC
 * - \ref PIN_SSC_TD
 * - \ref PIN_SSC_TK
 * - \ref PIN_SSC_TF
 * - \ref PINS_SSC_CODEC
 *
 * PCK0
 * - \ref PIN_PCK0
 *
 * PIO PARALLEL CAPTURE
 * - \ref PIN_PIODCEN1
 * - \ref PIN_PIODCEN2
 *
 * TWI
 * - \ref TWI_V3XX
 * - \ref PIN_TWI_TWD0
 * - \ref PIN_TWI_TWCK0
 * - \ref PINS_TWI0
 * - \ref PIN_TWI_TWD1
 * - \ref PIN_TWI_TWCK1
 * - \ref PINS_TWI1
 *
 * USART0
 * - \ref PIN_USART0_RXD
 * - \ref PIN_USART0_TXD
 * - \ref PIN_USART0_CTS
 * - \ref PIN_USART0_RTS
 * - \ref PIN_USART0_SCK
 *
 * USB
 * - \ref PIN_USB_VBUS
 *
 * NandFlash
 * - \ref PIN_EBI_NANDOE
 * - \ref PIN_EBI_NANDWE
 * - \ref PIN_EBI_NANDCLE
 * - \ref PIN_EBI_NANDALE
 * - \ref PIN_EBI_NANDIO
 * - \ref BOARD_NF_CE_PIN
 * - \ref BOARD_NF_RB_PIN
 * - \ref PINS_NANDFLASH
 *
 * QTouch
 * PIO definitions for Slider
 * \ref SLIDER_IOMASK_SNS
 * \ref SLIDER_IOMASK_SNSK
 * \ref PINS_SLIDER_SNS
 * \ref PINS_SLIDER_SNSK
 *
 * PIO definitions for keys
 * \ref KEY_IOMASK_SNS
 * \ref KEY_IOMASK_SNSK
 * \ref PINS_KEY_SNS
 * \ref PINS_KEY_SNSK
 *
 * PIOS for QTouch
 * \ref PINS_QTOUCH
 */

/** ADC_AD0 pin definition. */
#define PIN_ADC0_AD0 {1 << 21, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
/** ADC_AD1 pin definition. */
#define PIN_ADC0_AD1 {1 << 30, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
/** ADC_AD2 pin definition. */
#define PIN_ADC0_AD2 {1 << 3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
/** ADC_AD3 pin definition. */
#define PIN_ADC0_AD3 {1 << 4, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
/** ADC_AD4 pin definition. */
#define PIN_ADC0_AD4 {1 << 15, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
/** ADC_AD5 pin definition. */
#define PIN_ADC0_AD5 {1 << 16, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
/** ADC_AD6 pin definition. */
#define PIN_ADC0_AD6 {1 << 17, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
/** ADC_AD7 pin definition. */
#define PIN_ADC0_AD7 {1 << 18, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}

/** Pins ADC */
#define PINS_ADC PIN_ADC0_AD0, PIN_ADC0_AD1, PIN_ADC0_AD2, PIN_ADC0_AD3, PIN_ADC0_AD4, PIN_ADC0_AD5, PIN_ADC0_AD6, PIN_ADC0_AD7
#define PINS_ADC_TRIG  PIO_PA8_IDX
#define PINS_ADC_TRIG_FLAG  (PIO_PERIPH_B | PIO_DEFAULT)

/** Startup time max, return from Idle mode (in µs) */
#define ADC_STARTUP_TIME_MAX       15
/** Track and hold Acquisition Time min (in ns) */
#define ADC_TRACK_HOLD_TIME_MIN  1200
/** ADC clock frequency */
#define BOARD_ADC_FREQ     (6000000)

/** UART pins (UTXD0 and URXD0) definitions, PA9,10. */
#define PINS_UART		(PIO_PA9A_URXD0 | PIO_PA10A_UTXD0)
#define PINS_UART_FLAGS	(PIO_PERIPH_A | PIO_DEFAULT)

#define PINS_UART_MASK PIO_PA9A_URXD0|PIO_PA10A_UTXD0
#define PINS_UART_PIO PIOA
#define PINS_UART_ID ID_PIOA
#define PINS_UART_TYPE PIO_PERIPH_A
#define PINS_UART_ATTR PIO_DEFAULT

/** EBI Data Bus pins */
#define PIN_EBI_DATA_BUS_D0        PIO_PC0_IDX
#define PIN_EBI_DATA_BUS_D1        PIO_PC1_IDX
#define PIN_EBI_DATA_BUS_D2        PIO_PC2_IDX
#define PIN_EBI_DATA_BUS_D3        PIO_PC3_IDX
#define PIN_EBI_DATA_BUS_D4        PIO_PC4_IDX
#define PIN_EBI_DATA_BUS_D5        PIO_PC5_IDX
#define PIN_EBI_DATA_BUS_D6        PIO_PC6_IDX
#define PIN_EBI_DATA_BUS_D7        PIO_PC7_IDX
#define PIN_EBI_DATA_BUS_FLAGS           PIO_PERIPH_A | PIO_PULLUP
#define PIN_EBI_DATA_BUS_MASK  0xFF
#define PIN_EBI_DATA_BUS_PIO  PIOC
#define PIN_EBI_DATA_BUS_ID  ID_PIOC
#define PIN_EBI_DATA_BUS_TYPE PIO_PERIPH_A
#define PIN_EBI_DATA_BUS_ATTR PIO_PULLUP
/** EBI NRD pin */
#define PIN_EBI_NRD                 PIO_PC11_IDX
#define PIN_EBI_NRD_FLAGS       PIO_PERIPH_A | PIO_PULLUP
#define PIN_EBI_NRD_MASK  1 << 11
#define PIN_EBI_NRD_PIO  PIOC
#define PIN_EBI_NRD_ID  ID_PIOC
#define PIN_EBI_NRD_TYPE PIO_PERIPH_A
#define PIN_EBI_NRD_ATTR PIO_PULLUP
/** EBI NWE pin */
#define PIN_EBI_NWE                  PIO_PC8_IDX
#define PIN_EBI_NWE_FLAGS       PIO_PERIPH_A | PIO_PULLUP
#define PIN_EBI_NWE_MASK  1 << 8
#define PIN_EBI_NWE_PIO  PIOC
#define PIN_EBI_NWE_ID  ID_PIOC
#define PIN_EBI_NWE_TYPE PIO_PERIPH_A
#define PIN_EBI_NWE_ATTR PIO_PULLUP
/** EBI NCS0 pin */
#define PIN_EBI_NCS0                PIO_PC14_IDX
#define PIN_EBI_NCS0_FLAGS     PIO_PERIPH_A | PIO_PULLUP
#define PIN_EBI_NCS0_MASK  1 << 14
#define PIN_EBI_NCS0_PIO  PIOC
#define PIN_EBI_NCS0_ID  ID_PIOC
#define PIN_EBI_NCS0_TYPE PIO_PERIPH_A
#define PIN_EBI_NCS0_ATTR PIO_PULLUP
/** EBI address bus pins  */
#define PIN_EBI_ADDR_BUS_A0     PIO_PC18_IDX
#define PIN_EBI_ADDR_BUS_A1     PIO_PC19_IDX
#define PIN_EBI_ADDR_BUS_A2     PIO_PC20_IDX
#define PIN_EBI_ADDR_BUS_A3     PIO_PC21_IDX
#define PIN_EBI_ADDR_BUS_A4     PIO_PC22_IDX
#define PIN_EBI_ADDR_BUS_A5     PIO_PC23_IDX
#define PIN_EBI_ADDR_BUS_A6     PIO_PC24_IDX
#define PIN_EBI_ADDR_BUS_A7     PIO_PC25_IDX
#define PIN_EBI_ADDR_BUS_A8     PIO_PC26_IDX
#define PIN_EBI_ADDR_BUS_A9     PIO_PC27_IDX
#define PIN_EBI_ADDR_BUS_A10   PIO_PC28_IDX
#define PIN_EBI_ADDR_BUS_A11   PIO_PC29_IDX
#define PIN_EBI_ADDR_BUS_A12   PIO_PC30_IDX
#define PIN_EBI_ADDR_BUS_A13   PIO_PC31_IDX
#define PIN_EBI_ADDR_BUS_FLAG1  PIO_PERIPH_A | PIO_PULLUP
#define PIN_EBI_ADDR_BUS_A14   PIO_PA18_IDX
#define PIN_EBI_ADDR_BUS_A15   PIO_PA19_IDX
#define PIN_EBI_ADDR_BUS_A16   PIO_PA20_IDX
#define PIN_EBI_ADDR_BUS_A17   PIO_PA0_IDX
#define PIN_EBI_ADDR_BUS_A18   PIO_PA1_IDX
#define PIN_EBI_ADDR_BUS_A19   PIO_PA23_IDX
#define PIN_EBI_ADDR_BUS_A20   PIO_PA24_IDX
#define PIN_EBI_ADDR_BUS_FLAG2  PIO_PERIPH_C | PIO_PULLUP
/** EBI pin for LCD CS */
#define PIN_EBI_NCS1                 PIO_PC15_IDX
#define PIN_EBI_NCS1_FLAGS      PIO_PERIPH_A | PIO_PULLUP
#define PIN_EBI_NCS1_MASK  1 << 15
#define PIN_EBI_NCS1_PIO  PIOC
#define PIN_EBI_NCS1_ID  ID_PIOC
#define PIN_EBI_NCS1_TYPE PIO_PERIPH_A
#define PIN_EBI_NCS1_ATTR PIO_PULLUP
/** EBI pin for LCD RS */
#define PIN_EBI_LCD_RS                PIO_PC19_IDX
#define PIN_EBI_LCD_RS_FLAGS     PIO_PERIPH_A | PIO_PULLUP
#define PIN_EBI_LCD_RS_MASK  1 << 19
#define PIN_EBI_LCD_RS_PIO  PIOC
#define PIN_EBI_LCD_RS_ID  ID_PIOC
#define PIN_EBI_LCD_RS_TYPE PIO_PERIPH_A
#define PIN_EBI_LCD_RS_ATTR PIO_PULLUP

#define LED_BLUE      0
#define LED_GREEN     1
#define LED_RED       2

#ifdef BOARD_REV_A
/** LED #0 pin definition (BLUE). */
#define LED_0_NAME   "blue LED D2"
#define LED0_GPIO    (PIO_PC20_IDX)
#define LED0_FLAGS   (PIO_TYPE_PIO_OUTPUT_1 | PIO_DEFAULT)

#define PIN_LED_0   {PIO_PC20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_LED_0_MASK PIO_PC20
#define PIN_LED_0_PIO PIOC
#define PIN_LED_0_ID ID_PIOC
#define PIN_LED_0_TYPE PIO_OUTPUT_1
#define PIN_LED_0_ATTR PIO_DEFAULT

/** LED #1 pin definition (GREEN). */
#define LED_1_NAME    "green LED D3"
#define LED1_GPIO     (PIO_PC21_IDX)
#define LED1_FLAGS    (PIO_TYPE_PIO_OUTPUT_1 | PIO_DEFAULT)

#define PIN_LED_1   {PIO_PC21, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
/** LED #2 pin definition (RED). */
#define LED2_GPIO  (PIO_PC22_IDX)
#define LED2_FLAGS (PIO_TYPE_PIO_OUTPUT_1 | PIO_DEFAULT)

#define PIN_LED_2   {PIO_PC22, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
#endif

#ifdef BOARD_REV_B
/** LED #0 pin definition (BLUE). */
#define LED_0_NAME   "blue LED D2"
#define LED0_GPIO     (PIO_PA19_IDX)
#define LED0_FLAGS    (PIO_TYPE_PIO_OUTPUT_1 | PIO_DEFAULT)

#define PIN_LED_0   {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_LED_0_MASK PIO_PA19
#define PIN_LED_0_PIO PIOA
#define PIN_LED_0_ID ID_PIOA
#define PIN_LED_0_TYPE PIO_OUTPUT_1
#define PIN_LED_0_ATTR PIO_DEFAULT

/** LED #1 pin definition (GREEN). */
#define LED_1_NAME    "green LED D3"
#define LED1_GPIO     (PIO_PA20_IDX)
#define LED1_FLAGS    (PIO_TYPE_PIO_OUTPUT_1 | PIO_DEFAULT)

#define PIN_LED_1   {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_LED_1_MASK PIO_PA20
#define PIN_LED_1_PIO PIOA
#define PIN_LED_1_ID ID_PIOA
#define PIN_LED_1_TYPE PIO_OUTPUT_1
#define PIN_LED_1_ATTR PIO_DEFAULT

/** LED #2 pin definition (RED). */
#define LED2_GPIO 		(PIO_PC20_IDX)
#define LED2_FLAGS (PIO_TYPE_PIO_OUTPUT_1 | PIO_DEFAULT)

#define PIN_LED_2   {PIO_PC20, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}

#endif

/** List of all LEDs definitions. */
#define PINS_LEDS   PIN_LED_0, PIN_LED_1, PIN_LED_2

/** HSMCI pins definition. */
#define PINS_HSMCI   {0x3fUL << 26, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_PULLUP}
/** HSMCI pin Card Detect. */
#ifdef BOARD_REV_A
#define PIN_HSMCI_CD {PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
#endif

#ifdef BOARD_REV_B
#define PIN_HSMCI_CD {PIO_PA6, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
#endif

/** Push button #0 definition. Attributes = pull-up + debounce + interrupt on rising edge. */
#define PUSHBUTTON_1_NAME    "USRPB1"
#define GPIO_PUSH_BUTTON_1    (PIO_PB3_IDX)
#define GPIO_PUSH_BUTTON_1_FLAGS    (PIO_INPUT | PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)

#define PIN_PUSHBUTTON_1    {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
#define PIN_PUSHBUTTON_1_MASK PIO_PB3
#define PIN_PUSHBUTTON_1_PIO PIOB
#define PIN_PUSHBUTTON_1_ID ID_PIOB
#define PIN_PUSHBUTTON_1_TYPE PIO_INPUT
#define PIN_PUSHBUTTON_1_ATTR PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE

/** Push button #1 definition. Attributes = pull-up + debounce + interrupt on falling edge. */
#define PUSHBUTTON_2_NAME    "USRPB2"
#define GPIO_PUSH_BUTTON_2    (PIO_PC12_IDX)
#define GPIO_PUSH_BUTTON_2_FLAGS    (PIO_INPUT | PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_FALL_EDGE)

#define PIN_PUSHBUTTON_2    {PIO_PC12, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_FALL_EDGE}
#define PIN_PUSHBUTTON_2_MASK PIO_PC12
#define PIN_PUSHBUTTON_2_PIO PIOC
#define PIN_PUSHBUTTON_2_ID ID_PIOC
#define PIN_PUSHBUTTON_2_TYPE PIO_INPUT
#define PIN_PUSHBUTTON_2_ATTR PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_FALL_EDGE

/** List of all push button definitions. */
#define PINS_PUSHBUTTONS    PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2

/** Push button #1 index. */
#define PUSHBUTTON_BP1   0
/** Push button #2 index. */
#define PUSHBUTTON_BP2   1

#define PIN_TC0_TIOA0		(PIO_PA0_IDX)
#define PIN_TC0_TIOA0_FLAGS	(PIO_PERIPH_B | PIO_DEFAULT)

#define PIN_TC0_TIOA1		(PIO_PA15_IDX)
#define PIN_TC0_TIOA1_FLAGS	(PIO_PERIPH_B | PIO_DEFAULT)

#define PIN_TC0_TIOA1_PIO     PIOA
#define PIN_TC0_TIOA1_MASK  PIO_PA15
#define PIN_TC0_TIOA1_ID      ID_PIOA
#define PIN_TC0_TIOA1_TYPE   PIO_PERIPH_B
#define PIN_TC0_TIOA1_ATTR   PIO_DEFAULT

#define PIN_TC0_TIOA2		(PIO_PA26_IDX)
#define PIN_TC0_TIOA2_FLAGS	(PIO_INPUT | PIO_DEFAULT)

#define PIN_TC0_TIOA2_PIO     PIOA
#define PIN_TC0_TIOA2_MASK  PIO_PA26
#define PIN_TC0_TIOA2_ID      ID_PIOA
#define PIN_TC0_TIOA2_TYPE   PIO_INPUT
#define PIN_TC0_TIOA2_ATTR   PIO_DEFAULT

/** PWMC PWM0 pin definition: Output High. */
#define PIN_PWMC_PWMH0  {PIO_PC18B_PWMH0, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
#define PIN_PWMC_PWMH0_TRIG   PIO_PC18_IDX
#define PIN_PWMC_PWMH0_TRIG_FLAG   PIO_PERIPH_B | PIO_DEFAULT
/** PWMC PWM0 pin definition: Output Low. */
#define PIN_PWMC_PWML0  {PIO_PA19B_PWML0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/** PWMC PWM1 pin definition: Output High. */
#define PIN_PWMC_PWMH1  {PIO_PC19B_PWMH1, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
/** PWMC PWM1 pin definition: Output Low. */
#define PIN_PWMC_PWML1  {PIO_PA20B_PWML1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/** PWMC PWM2 pin definition: Output High. */
#define PIN_PWMC_PWMH2  {PIO_PC20B_PWMH2, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
/** PWMC PWM2 pin definition: Output Low. */
#define PIN_PWMC_PWML2  {PIO_PA16C_PWML2, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT}
/** PWMC PWM3 pin definition: Output High. */
#define PIN_PWMC_PWMH3  {PIO_PC21B_PWMH3, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
/** PWMC PWM3 pin definition: Output Low. */
#define PIN_PWMC_PWML3  {PIO_PA15C_PWML3, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT}
/** PWM pins definition for LED0 */
#define PIN_PWM_LED0 PIN_PWMC_PWMH0, PIN_PWMC_PWML0
/** PWM pins definition for LED1 */
#define PIN_PWM_LED1 PIN_PWMC_PWMH1, PIN_PWMC_PWML1
/** PWM pins definition for LED2 */
#define PIN_PWM_LED2 PIN_PWMC_PWMH2, PIN_PWMC_PWML2
/** PWM channel for LED0 */
#define CHANNEL_PWM_LED0 0
/** PWM channel for LED1 */
#define CHANNEL_PWM_LED1 1
/** PWM channel for LED2 */
#define CHANNEL_PWM_LED2 2

/** PWM LED0 pin definitions. */
#define PIN_PWM_LED0_GPIO    PIO_PA19_IDX
#define PIN_PWM_LED0_FLAGS   (PIO_PERIPH_B | PIO_DEFAULT)
#define PIN_PWM_LED0_CHANNEL PWM_CHANNEL_0

/** PWM LED1 pin definitions. */
#define PIN_PWM_LED1_GPIO    PIO_PA20_IDX
#define PIN_PWM_LED1_FLAGS   (PIO_PERIPH_B | PIO_DEFAULT)
#define PIN_PWM_LED1_CHANNEL PWM_CHANNEL_1

/** PWM LED2 pin definitions. */
#define PIN_PWM_LED2_GPIO    PIO_PC20_IDX
#define PIN_PWM_LED2_FLAGS   (PIO_PERIPH_B | PIO_DEFAULT)

/** SPI MISO pin definition. */
#define PIN_SPI_MISO    {PIO_PA12A_MISO, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** SPI MOSI pin definition. */
#define PIN_SPI_MOSI    {PIO_PA13A_MOSI, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** SPI SPCK pin definition. */
#define PIN_SPI_SPCK    {PIO_PA14A_SPCK, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** SPI chip select pin definition. */
#define PIN_SPI_NPCS0_PA11  {PIO_PA11A_NPCS0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** List of SPI pin definitions (MISO, MOSI & SPCK). */
#define PINS_SPI        PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK
/** SPI MISO pin definition. */
#define SPI_MISO_GPIO 		      (PIO_PA12_IDX)
#define SPI_MISO_FLAGS       (PIO_PERIPH_A | PIO_DEFAULT)
/** SPI MOSI pin definition. */
#define SPI_MOSI_GPIO 		      (PIO_PA13_IDX)
#define SPI_MOSI_FLAGS       (PIO_PERIPH_A | PIO_DEFAULT)
/** SPI SPCK pin definition. */
#define SPI_SPCK_GPIO 		      (PIO_PA14_IDX)
#define SPI_SPCK_FLAGS       (PIO_PERIPH_A | PIO_DEFAULT)

/** SPI chip select 0 pin definition. (Only one configuration is possible) */
#define SPI_NPCS0_GPIO            (PIO_PA11_IDX)
#define SPI_NPCS0_FLAGS           (PIO_PERIPH_A | PIO_DEFAULT)
/** SPI chip select 1 pin definition. (multiple configurations are possible) */
#define SPI_NPCS1_PA9_GPIO 		  (PIO_PA9_IDX)
#define SPI_NPCS1_PA9_FLAGS       (PIO_PERIPH_B | PIO_DEFAULT)
#define SPI_NPCS1_PA31_GPIO 	  (PIO_PA31_IDX)
#define SPI_NPCS1_PA31_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
#define SPI_NPCS1_PB14_GPIO	      (PIO_PB14_IDX)
#define SPI_NPCS1_PB14_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
#define SPI_NPCS1_PC4_GPIO 		  (PIO_PC4_IDX)
#define SPI_NPCS1_PC4_FLAGS       (PIO_PERIPH_B | PIO_DEFAULT)
/** SPI chip select 2 pin definition. (multiple configurations are possible) */
#define SPI_NPCS2_PA10_GPIO 	  (PIO_PA10_IDX)
#define SPI_NPCS2_PA10_FLAGS      (PIO_PERIPH_B | PIO_DEFAULT)
#define SPI_NPCS2_PA30_GPIO 	  (PIO_PA30_IDX)
#define SPI_NPCS2_PA30_FLAGS      (PIO_PERIPH_B | PIO_DEFAULT)
#define SPI_NPCS2_PB2_GPIO 		  (PIO_PB2_IDX)
#define SPI_NPCS2_PB2_FLAGS       (PIO_PERIPH_B | PIO_DEFAULT)
/** SPI chip select 3 pin definition. (multiple configurations are possible) */
#define SPI_NPCS3_PA3_GPIO 		  (PIO_PA3_IDX)
#define SPI_NPCS3_PA3_FLAGS       (PIO_PERIPH_B | PIO_DEFAULT)
#define SPI_NPCS3_PA5_GPIO 		  (PIO_PA5_IDX)
#define SPI_NPCS3_PA5_FLAGS       (PIO_PERIPH_B | PIO_DEFAULT)
#define SPI_NPCS3_PA22_GPIO 	  (PIO_PA22_IDX)
#define SPI_NPCS3_PA22_FLAGS      (PIO_PERIPH_B | PIO_DEFAULT)

/** SSC pin Transmitter Data (TD) */
#define PIN_SSC_TD      {PIO_PA17A_TD, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** SSC pin Transmitter Clock (TK) */
#define PIN_SSC_TK      {PIO_PA16A_TK, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** SSC pin Transmitter FrameSync (TF) */
#define PIN_SSC_TF      {PIO_PA15A_TF, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** SSC pins definition for codec. */
#define PINS_SSC_CODEC  PIN_SSC_TD, PIN_SSC_TK, PIN_SSC_TF

/** PCK0 */
#define PIN_PCK0		(PIO_PA6_IDX)
#define PIN_PCK0_FLAGS	(PIO_PERIPH_B | PIO_DEFAULT)

#define PIN_PCK_0_MASK PIO_PA6
#define PIN_PCK_0_PIO PIOA
#define PIN_PCK_0_ID ID_PIOA
#define PIN_PCK_0_TYPE PIO_PERIPH_B
#define PIN_PCK_0_ATTR PIO_DEFAULT
#define PIN_PCK1        {PIO_PA17B_PCK1,PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
#define PIN_PCK_1_MASK PIO_PA17
#define PIN_PCK_1_PIO PIOA
#define PIN_PCK_1_ID ID_PIOA
#define PIN_PCK_1_TYPE PIO_PERIPH_B
#define PIN_PCK_1_ATTR PIO_DEFAULT

/** PIO PARALLEL CAPTURE */
/** Parallel Capture Mode Data Enable1 */
#define PIN_PIODCEN1    PIO_PA15
/** Parallel Capture Mode Data Enable2 */
#define PIN_PIODCEN2    PIO_PA16

/** TWI ver 3.xx */
#define TWI_V3XX
/** TWI0 data pin */
#define PIN_TWI_TWD0   {PIO_PA3A_TWD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** TWI0 clock pin */
#define PIN_TWI_TWCK0  {PIO_PA4A_TWCK0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** TWI0 pins */
#define PINS_TWI0      PIN_TWI_TWD0, PIN_TWI_TWCK0
/** TWI1 data pin */
#define PIN_TWI_TWD1   {PIO_PB4A_TWD1, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
/** TWI1 clock pin */
#define PIN_TWI_TWCK1  {PIO_PB5A_TWCK1, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
/** TWI1 pins */
#define PINS_TWI1      PIN_TWI_TWD1, PIN_TWI_TWCK1

/** USART0 pin RX */
#define PIN_USART0_RXD    {PIO_PA5A_RXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART0_RXD_IDX        (PIO_PA5_IDX)
#define PIN_USART0_RXD_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
/** USART0 pin TX */
#define PIN_USART0_TXD    {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART0_TXD_IDX        (PIO_PA6_IDX)
#define PIN_USART0_TXD_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
/** USART0 pin CTS */
#define PIN_USART0_CTS    {PIO_PA8A_CTS0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART0_CTS_IDX        (PIO_PA8_IDX)
#define PIN_USART0_CTS_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
/** USART0 pin RTS */
#define PIN_USART0_RTS    {PIO_PA7A_RTS0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART0_RTS_IDX        (PIO_PA7_IDX)
#define PIN_USART0_RTS_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
/** USART0 pin SCK */
#define PIN_USART0_SCK    {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART0_SCK_IDX        (PIO_PA2_IDX)
#define PIN_USART0_SCK_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)

/** USART1 pin RX */
#define PIN_USART1_RXD    {PIO_PA21A_RXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART1_RXD_IDX        (PIO_PA21_IDX)
#define PIN_USART1_RXD_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
/** USART1 pin TX */
#define PIN_USART1_TXD    {PIO_PA22A_TXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART1_TXD_IDX        (PIO_PA22_IDX)
#define PIN_USART1_TXD_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
/** USART1 pin CTS */
#define PIN_USART1_CTS    {PIO_PA25A_CTS1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART1_CTS_IDX        (PIO_PA25_IDX)
#define PIN_USART1_CTS_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
/** USART1 pin RTS */
#define PIN_USART1_RTS    {PIO_PA24A_RTS1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART1_RTS_IDX        (PIO_PA24_IDX)
#define PIN_USART1_RTS_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)
/** USART1 pin ENABLE */
#define PIN_USART1_EN     {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define PIN_USART1_EN_IDX         (PIO_PA23_IDX)
#define PIN_USART1_EN_FLAGS       (PIO_OUTPUT_0 | PIO_DEFAULT)
/** USART1 pin SCK */
#define PIN_USART1_SCK    {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USART1_SCK_IDX        (PIO_PA23_IDX)
#define PIN_USART1_SCK_FLAGS      (PIO_PERIPH_A | PIO_DEFAULT)

/** USB VBus monitoring pin definition. */
#ifdef BOARD_REV_A
#define PIN_USB_VBUS    {PIO_PC23, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP}
#endif

#ifdef BOARD_REV_B
#define PIN_USB_VBUS    {PIO_PC21, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP}
#endif

/** NandFlash pins definition: OE. */
#define PIN_EBI_NANDOE    (PIO_PC9_IDX)
#define PIN_EBI_NANDOE_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

/** NandFlash pins definition: WE. */
#define PIN_EBI_NANDWE    (PIO_PC10_IDX)
#define PIN_EBI_NANDWE_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

/** NandFlash pins definition: CLE. */
#define PIN_EBI_NANDCLE    (PIO_PC17_IDX)
#define PIN_EBI_NANDCLE_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

/** NandFlash pins definition: ALE. */
#define PIN_EBI_NANDALE    (PIO_PC16_IDX)
#define PIN_EBI_NANDALE_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

/** NandFlash pins definition: DATA. */
#define PIN_EBI_NANDIO_0    (PIO_PC0_IDX)
#define PIN_EBI_NANDIO_0_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

#define PIN_EBI_NANDIO_1    (PIO_PC1_IDX)
#define PIN_EBI_NANDIO_1_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

#define PIN_EBI_NANDIO_2    (PIO_PC2_IDX)
#define PIN_EBI_NANDIO_2_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

#define PIN_EBI_NANDIO_3    (PIO_PC3_IDX)
#define PIN_EBI_NANDIO_3_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

#define PIN_EBI_NANDIO_4    (PIO_PC4_IDX)
#define PIN_EBI_NANDIO_4_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

#define PIN_EBI_NANDIO_5    (PIO_PC5_IDX)
#define PIN_EBI_NANDIO_5_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

#define PIN_EBI_NANDIO_6    (PIO_PC6_IDX)
#define PIN_EBI_NANDIO_6_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

#define PIN_EBI_NANDIO_7    (PIO_PC7_IDX)
#define PIN_EBI_NANDIO_7_FLAGS    (PIO_PERIPH_A | PIO_PULLUP)

/** Nandflash chip enable pin definition. */
#define PIN_NF_CE_IDX    (PIO_PC14_IDX)
#define PIN_NF_CE_FLAGS    (PIO_TYPE_PIO_OUTPUT_1 | PIO_DEFAULT)

/** Nandflash ready/busy pin definition. */
#define PIN_NF_RB_IDX    (PIO_PC18_IDX)
#define PIN_NF_RB_FLAGS    (PIO_INPUT | PIO_PULLUP)

/* Chip select number for nand */
#define BOARD_NAND_CS    0

/* PIO definitions for Slider */
#define SLIDER_IOMASK_SNS   (uint32_t)(PIO_PA0 | PIO_PA2 | PIO_PA4)
#define SLIDER_IOMASK_SNSK  (uint32_t)(PIO_PA1 | PIO_PA3 | PIO_PA5)
#define PINS_SLIDER_SNS     {SLIDER_IOMASK_SNS,  PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
#define PINS_SLIDER_SNSK    {SLIDER_IOMASK_SNSK, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}

/* PIO definitions for keys */
#define KEY_IOMASK_SNS   (uint32_t)(PIO_PC22 | PIO_PC24 | PIO_PC26 | PIO_PC28 | PIO_PC30)
#define KEY_IOMASK_SNSK  (uint32_t)(PIO_PC23 | PIO_PC25 | PIO_PC27 | PIO_PC29 | PIO_PC31)
#define PINS_KEY_SNS     {KEY_IOMASK_SNS,  PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}
#define PINS_KEY_SNSK    {KEY_IOMASK_SNSK, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT}

/* PIOS for QTouch */
#define PINS_QTOUCH     PINS_SLIDER_SNS, PINS_SLIDER_SNSK, PINS_KEY_SNS, PINS_KEY_SNSK


/*----------------------------------------------------------------------------*/
/**
 * \page sam3s_ek_usb "SAM3S-EK - USB device"
 *
 * \section Definitions
 * - \ref BOARD_USB_BMATTRIBUTES
 * - \ref CHIP_USB_UDP
 * - \ref CHIP_USB_PULLUP_INTERNAL
 * - \ref CHIP_USB_NUMENDPOINTS
 * - \ref CHIP_USB_ENDPOINTS_MAXPACKETSIZE
 * - \ref CHIP_USB_ENDPOINTS_BANKS
 */

/** USB attributes configuration descriptor (bus or self powered, remote wakeup) */
#define BOARD_USB_BMATTRIBUTES              USBConfigurationDescriptor_SELFPOWERED_RWAKEUP

/** Indicates chip has an UDP Full Speed. */
#define CHIP_USB_UDP

/** Indicates chip has an internal pull-up. */
#define CHIP_USB_PULLUP_INTERNAL

/** Number of USB endpoints */
#define CHIP_USB_NUMENDPOINTS 8

/** Endpoints max packet size */
#define CHIP_USB_ENDPOINTS_MAXPACKETSIZE(i) \
   ((i == 0) ? 64 : \
   ((i == 1) ? 64 : \
   ((i == 2) ? 64 : \
   ((i == 3) ? 64 : \
   ((i == 4) ? 512 : \
   ((i == 5) ? 512 : \
   ((i == 6) ? 64 : \
   ((i == 7) ? 64 : 0 ))))))))

/** Endpoints Number of Bank */
#define CHIP_USB_ENDPOINTS_BANKS(i) \
   ((i == 0) ? 1 : \
   ((i == 1) ? 2 : \
   ((i == 2) ? 2 : \
   ((i == 3) ? 1 : \
   ((i == 4) ? 2 : \
   ((i == 5) ? 2 : \
   ((i == 6) ? 2 : \
   ((i == 7) ? 2 : 0 ))))))))

/*----------------------------------------------------------------------------*/
/**
 * \page sam3s_ek_extcomp "SAM3S-EK - External components"
 * This page lists the definitions related to external on-board components
 * located in the board.h file for the SAM3S-EK.
 *
 * SD Card
 * - \ref BOARD_SD_PINS
 * - \ref BOARD_SD_PIN_CD
 *
 * LCD
 * - \ref BOARD_LCD_ILI9325
 * - \ref BOARD_LCD_PINS
 * - \ref BOARD_BACKLIGHT_PIN
 * - \ref BOARD_LCD_BASE
 * - \ref BOARD_LCD_RS
 *
 * TouchScreen
 * - \ref BOARD_TSC_ADS7843
 * - \ref PIN_TCS_IRQ
 * - \ref PIN_TCS_BUSY
 * - \ref BOARD_TSC_SPI_BASE
 * - \ref BOARD_TSC_SPI_ID
 * - \ref BOARD_TSC_SPI_PINS
 * - \ref BOARD_TSC_NPCS
 * - \ref BOARD_TSC_NPCS_PIN
 *
 * SmartCard
 * - \ref SMARTCARD_CONNECT_PIN
 * - \ref PIN_ISO7816_RSTMC
 * - \ref PINS_ISO7816
 */

/** HSMCI pins that shall be configured to access the SD card. */
#define BOARD_SD_PINS               PINS_HSMCI
/** HSMCI Card Detect pin. */
#define BOARD_SD_PIN_CD             PIN_HSMCI_CD

/** Indicates board has an ILI9325 external component to manage LCD. */
#define BOARD_LCD_ILI9325

/** Backlight pin definition. */
#define BOARD_BACKLIGHT          PIO_PC13_IDX
#define BOARD_BACKLIGHT_FLAG       PIO_OUTPUT_0 | PIO_DEFAULT
#define BOARD_BACKLIGHT_PIN         {PIO_PC13, PIOC, ID_PIOC, PIO_OUTPUT_0, PIO_DEFAULT}
#define PIN_BOARD_BACKLIGHT_MASK PIO_PC13
#define PIN_BOARD_BACKLIGHT_PIO PIOC
#define PIN_BOARD_BACKLIGHT_ID ID_PIOC
#define PIN_BOARD_BACKLIGHT_TYPE PIO_OUTPUT_0
#define PIN_BOARD_BACKLIGHT_ATTR PIO_PULLUP
/** Define ILI9325 base address. */
#define BOARD_LCD_BASE              0x61000000
/** Define ILI9325 register select signal. */
#define BOARD_LCD_RS                (1 << 1)

/** Indicates board has an ADS7843 external component to manage Touch Screen */
#define BOARD_TSC_ADS7843

/** Definition of MMA7341L x,y,z axis channel number */
#define MMA7341L_ADC_CHANNEL_X  2
#define MMA7341L_ADC_CHANNEL_Y  6
#define MMA7341L_ADC_CHANNEL_Z  7

/** MMA7341L mode set pin definition. */
#define PIN_MMA7341L_MODE                PIO_PC13_IDX
#define PIN_MMA7341L_MODE_FLAG       PIO_OUTPUT_1 | PIO_DEFAULT

/** MMA7341L X,Y,Z axis pin definition. */
#define PIN_MMA7341L_X_AXIS                PIO_PB3_IDX
#define PIN_MMA7341L_X_AXIS_FLAG       PIO_INPUT | PIO_DEFAULT
#define PIN_MMA7341L_Y_AXIS                PIO_PC17_IDX
#define PIN_MMA7341L_Y_AXIS_FLAG       PIO_INPUT | PIO_DEFAULT
#define PIN_MMA7341L_Z_AXIS                PIO_PC18_IDX
#define PIN_MMA7341L_Z_AXIS_FLAG       PIO_INPUT | PIO_DEFAULT

/** Touchscreen controller IRQ pin definition. */
#ifdef BOARD_REV_A
#define PIN_TSC_IRQ_IDX    PIO_PA4_IDX
#define PIN_TSC_IRQ_FLAG  PIO_INPUT | PIO_PULLUP
#define PIN_TSC_IRQ  {PIO_PA4, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
#define PIN_TSC_IRQ_MASK PIO_PA4
#define PIN_TSC_IRQ_PIO PIOA
#define PIN_TSC_IRQ_ID ID_PIOA
#define PIN_TSC_IRQ_TYPE PIO_INPUT
#define PIN_TSC_IRQ_ATTR PIO_PULLUP
#define PIN_TSC_IRQ_WUP_ID (1 << 3)
/** Touchscreen controller Busy pin definition. */
#define PIN_TSC_BUSY_IDX  PIO_PA5_IDX
#define PIN_TSC_BUSY_FLAG    PIO_INPUT | PIO_PULLUP
#define PIN_TSC_BUSY {PIO_PA5, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
#define PIN_TSC_BUSY_MASK PIO_PA5
#define PIN_TSC_BUSY_PIO PIOA
#define PIN_TSC_BUSY_ID ID_PIOA
#define PIN_TSC_BUSY_TYPE PIO_INPUT
#define PIN_TSC_BUSY_ATTR PIO_PULLUP
#endif

#ifdef BOARD_REV_B
#define PIN_TSC_IRQ_IDX    PIO_PA16_IDX
#define PIN_TSC_IRQ_FLAG  PIO_INPUT | PIO_PULLUP
#define PIN_TSC_IRQ  {PIO_PA16, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
#define PIN_TSC_IRQ_MASK PIO_PA16
#define PIN_TSC_IRQ_PIO PIOA
#define PIN_TSC_IRQ_ID ID_PIOA
#define PIN_TSC_IRQ_TYPE PIO_INPUT
#define PIN_TSC_IRQ_ATTR PIO_PULLUP
#define PIN_TSC_IRQ_WUP_ID (1 << 15)
/** Touchscreen controller Busy pin definition. */
#define PIN_TSC_BUSY_IDX  PIO_PA17_IDX
#define PIN_TSC_BUSY_FLAG    PIO_INPUT | PIO_PULLUP
#define PIN_TSC_BUSY {PIO_PA17, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
#define PIN_TSC_BUSY_MASK PIO_PA17
#define PIN_TSC_BUSY_PIO PIOA
#define PIN_TSC_BUSY_ID ID_PIOA
#define PIN_TSC_BUSY_TYPE PIO_INPUT
#define PIN_TSC_BUSY_ATTR PIO_PULLUP
#endif

/** Base address of SPI peripheral connected to the touchscreen controller. */
#define BOARD_TSC_SPI_BASE         SPI
/** Identifier of SPI peripheral connected to the touchscreen controller. */
#define BOARD_TSC_SPI_ID           ID_SPI
/** Pins of the SPI peripheral connected to the touchscreen controller. */
#define BOARD_TSC_SPI_PINS         PINS_SPI
/** Chip select connected to the touchscreen controller. */
#define BOARD_TSC_NPCS             0
/** Chip select pin connected to the touchscreen controller. */
#define BOARD_TSC_NPCS_PIN         PIN_SPI_NPCS0_PA11

/// Smartcard detection pin
//#define SMARTCARD_CONNECT_PIN {1 << 13, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}

/// PIN used for reset the smartcard
#define PIN_ISO7816_RSTMC       {1 << 11, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/// Pins used for connect the smartcard
#define PINS_ISO7816            PIN_USART1_TXD, PIN_USART1_SCK, PIN_ISO7816_RSTMC

/*----------------------------------------------------------------------------*/
/**
 * \page sam3s_ek_mem "SAM3S-EK - Memories"
 * This page lists definitions related to internal & external on-board memories.
 *
 * \section NandFlash
 * - \ref BOARD_NF_COMMAND_ADDR
 * - \ref BOARD_NF_ADDRESS_ADDR
 * - \ref BOARD_NF_DATA_ADDR
 *
 * \section NorFlash
 * - \ref BOARD_NORFLASH_ADDR
 * - \ref BOARD_NORFLASH_DFT_BUS_SIZE
 */

/** Address for transferring command bytes to the nandflash. */
#define BOARD_NF_COMMAND_ADDR   0x60400000
/** Address for transferring address bytes to the nandflash. */
#define BOARD_NF_ADDRESS_ADDR   0x60200000
/** Address for transferring data bytes to the nandflash. */
#define BOARD_NF_DATA_ADDR      0x60000000
/* Bus width for NAND */
#define CONF_NF_BUSWIDTH    8
/* Access timing for NAND */
#define CONF_NF_SETUP_TIMING (SMC_SETUP_NWE_SETUP(0) \
		| SMC_SETUP_NCS_WR_SETUP(1) \
		| SMC_SETUP_NRD_SETUP(0) \
		| SMC_SETUP_NCS_RD_SETUP(1))
#define CONF_NF_PULSE_TIMING (SMC_PULSE_NWE_PULSE(2) \
		| SMC_PULSE_NCS_WR_PULSE(3) \
		| SMC_PULSE_NRD_PULSE(4) \
		| SMC_PULSE_NCS_RD_PULSE(4))
#define CONF_NF_CYCLE_TIMING (SMC_CYCLE_NWE_CYCLE(4) \
		| SMC_CYCLE_NRD_CYCLE(7))

/** Address for transferring command bytes to the norflash. */
#define BOARD_NORFLASH_ADDR     0x63000000
/** Default NOR bus size after power up reset */
#define BOARD_NORFLASH_DFT_BUS_SIZE 8

/*----------------------------------------------------------------------------*/
/**
 * \page sam3s_ek_chipdef "SAM3S-EK - Individual chip definition"
 * This page lists the definitions related to different chip's definition
 * located in the board.h file for the SAM3S-EK.
 *
 * \section USART
 * - \ref BOARD_PIN_USART_RXD
 * - \ref BOARD_PIN_USART_TXD
 * - \ref BOARD_PIN_USART_CTS
 * - \ref BOARD_PIN_USART_RTS
 * - \ref BOARD_PIN_USART_EN
 * - \ref BOARD_USART_BASE
 * - \ref BOARD_ID_USART
 */

/** Rtc */
#define BOARD_RTC_ID                ID_RTC

/** TWI ID for EEPROM application to use */
#define BOARD_ID_TWI_EEPROM         ID_TWI1
/** TWI Base for TWI EEPROM application to use */
#define BOARD_BASE_TWI_EEPROM       TWI1
/** TWI pins for EEPROM application to use */
#define BOARD_PINS_TWI_EEPROM       PINS_TWI1

/** USART RX pin for application */
#define BOARD_PIN_USART_RXD        PIN_USART1_RXD
/** USART TX pin for application */
#define BOARD_PIN_USART_TXD        PIN_USART1_TXD
/** USART CTS pin for application */
#define BOARD_PIN_USART_CTS        PIN_USART1_CTS
/** USART RTS pin for application */
#define BOARD_PIN_USART_RTS        PIN_USART1_RTS
/** USART ENABLE pin for application */
#define BOARD_PIN_USART_EN         PIN_USART1_EN
/** USART Base for application */
#define BOARD_USART_BASE           USART1
/** USART ID for application */
#define BOARD_ID_USART             ID_USART1

#define CONSOLE_UART			   UART0
#define CONSOLE_UART_ID            ID_UART0

/* RE pin. */
#define PIN_RE_IDX                 PIN_USART1_CTS_IDX
#define PIN_RE_FLAGS               (PIO_OUTPUT_0 | PIO_DEFAULT)

/* IRDA SD pin. */
#define PIN_IRDA_SD_IDX            PIN_USART1_CTS_IDX
#define PIN_IRDA_SD_FLAGS          (PIO_OUTPUT_1 | PIO_DEFAULT)

/* TXD pin configuration. */
#define PIN_USART_TXD_IDX          PIN_USART1_TXD_IDX
#define PIN_USART_TXD_FLAGS        (PIO_PERIPH_A | PIO_DEFAULT)
#define PIN_USART_TXD_IO_FLAGS     (PIO_OUTPUT_0 | PIO_DEFAULT)

/* ISO7816 example relate PIN definition. */
#define ISO7816_USART_ID           ID_USART1
#define ISO7816_USART              USART1
#define PIN_ISO7816_RST_IDX        PIO_PA15_IDX
#define PIN_ISO7816_RST_FLAG       (PIO_OUTPUT_0 | PIO_DEFAULT)

#endif  // _SAM3S_EK2_H_