FreeRTOS-Plus/Demo/FreeRTOS_Plus_UDP_and_CLI_LPC1830_GCC/cr_startup_lpc18xx.c

// *****************************************************************************
//   +--+
//   | ++----+
//   +-++    |
//     |     |
//   +-+--+  |
//   | +--+--+
//   +----+    Copyright (c) 2011-12 Code Red Technologies Ltd.
//
// LPC43xx Microcontroller Startup code for use with Red Suite
//
// Version : 120430
//
// Software License Agreement
//
// The software is owned by Code Red Technologies and/or its suppliers, and is
// protected under applicable copyright laws.  All rights are reserved.  Any
// use in violation of the foregoing restrictions may subject the user to criminal
// sanctions under applicable laws, as well as to civil liability for the breach
// of the terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// USE OF THIS SOFTWARE FOR COMMERCIAL DEVELOPMENT AND/OR EDUCATION IS SUBJECT
// TO A CURRENT END USER LICENSE AGREEMENT (COMMERCIAL OR EDUCATIONAL) WITH
// CODE RED TECHNOLOGIES LTD.
//
// *****************************************************************************

#include "stdint.h"

#if defined(__cplusplus)
#ifdef __REDLIB__
#error Redlib does not support C++
#else
// *****************************************************************************
//
// The entry point for the C++ library startup
//
// *****************************************************************************
extern "C" {
extern void __libc_init_array(void);

}
#endif
#endif

#define WEAK __attribute__ ((weak))
#define ALIAS(f) __attribute__ ((weak, alias(# f)))

// Code Red - if CMSIS is being used, then SystemInit() routine
// will be called by startup code rather than in application's main()
extern void SystemInit(void);

// *****************************************************************************
#if defined(__cplusplus)
extern "C" {
#endif

// *****************************************************************************
//
// Forward declaration of the default handlers. These are aliased.
// When the application defines a handler (with the same name), this will
// automatically take precedence over these weak definitions
//
// *****************************************************************************
void ResetISR(void);
WEAK void NMI_Handler(void);
WEAK void HardFault_Handler(void);
WEAK void MemManage_Handler(void);
WEAK void BusFault_Handler(void);
WEAK void UsageFault_Handler(void);
WEAK void SVC_Handler(void);
WEAK void DebugMon_Handler(void);
WEAK void PendSV_Handler(void);
WEAK void SysTick_Handler(void);
WEAK void IntDefaultHandler(void);

//*****************************************************************************
//
// Forward declaration of the specific IRQ handlers. These are aliased
// to the IntDefaultHandler, which is a 'forever' loop. When the application
// defines a handler (with the same name), this will automatically take
// precedence over these weak definitions
//
//*****************************************************************************
void DAC_IRQHandler(void) ALIAS(IntDefaultHandler);
void MX_CORE_IRQHandler(void) ALIAS(IntDefaultHandler);
void DMA_IRQHandler(void) ALIAS(IntDefaultHandler);
void FLASHEEPROM_IRQHandler(void) ALIAS(IntDefaultHandler);
void ETH_IRQHandler(void) ALIAS(IntDefaultHandler);
void SDIO_IRQHandler(void) ALIAS(IntDefaultHandler);
void LCD_IRQHandler(void) ALIAS(IntDefaultHandler);
void USB0_IRQHandler(void) ALIAS(IntDefaultHandler);
void USB1_IRQHandler(void) ALIAS(IntDefaultHandler);
void SCT_IRQHandler(void) ALIAS(IntDefaultHandler);
void RIT_IRQHandler(void) ALIAS(IntDefaultHandler);
void TIMER0_IRQHandler(void) ALIAS(IntDefaultHandler);
void TIMER1_IRQHandler(void) ALIAS(IntDefaultHandler);
void TIMER2_IRQHandler(void) ALIAS(IntDefaultHandler);
void TIMER3_IRQHandler(void) ALIAS(IntDefaultHandler);
void MCPWM_IRQHandler(void) ALIAS(IntDefaultHandler);
void ADC0_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2C0_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2C1_IRQHandler(void) ALIAS(IntDefaultHandler);
void SPI_IRQHandler (void) ALIAS(IntDefaultHandler);
void ADC1_IRQHandler(void) ALIAS(IntDefaultHandler);
void SSP0_IRQHandler(void) ALIAS(IntDefaultHandler);
void SSP1_IRQHandler(void) ALIAS(IntDefaultHandler);
void UART0_IRQHandler(void) ALIAS(IntDefaultHandler);
void UART1_IRQHandler(void) ALIAS(IntDefaultHandler);
void UART2_IRQHandler(void) ALIAS(IntDefaultHandler);
void UART3_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2S0_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2S1_IRQHandler(void) ALIAS(IntDefaultHandler);
void SPIFI_IRQHandler(void) ALIAS(IntDefaultHandler);
void SGPIO_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO0_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO1_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO2_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO3_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO4_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO5_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO6_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO7_IRQHandler(void) ALIAS(IntDefaultHandler);
void GINT0_IRQHandler(void) ALIAS(IntDefaultHandler);
void GINT1_IRQHandler(void) ALIAS(IntDefaultHandler);
void EVRT_IRQHandler(void) ALIAS(IntDefaultHandler);
void CAN1_IRQHandler(void) ALIAS(IntDefaultHandler);
void ATIMER_IRQHandler(void) ALIAS(IntDefaultHandler);
void RTC_IRQHandler(void) ALIAS(IntDefaultHandler);
void WDT_IRQHandler(void) ALIAS(IntDefaultHandler);
void CAN0_IRQHandler(void) ALIAS(IntDefaultHandler);
void QEI_IRQHandler(void) ALIAS(IntDefaultHandler);

//*****************************************************************************
//
// The entry point for the application.
// __main() is the entry point for Redlib based applications
// main() is the entry point for Newlib based applications
//
//*****************************************************************************
#if defined (__REDLIB__)
extern void __main(void);
#endif
extern int main(void);
//*****************************************************************************
//
// External declaration for the pointer to the stack top from the Linker Script
//
//*****************************************************************************
extern void _vStackTop(void);

//*****************************************************************************
#if defined (__cplusplus)
} // extern "C"
#endif
//*****************************************************************************
//
// The vector table.
// This relies on the linker script to place at correct location in memory.
//
// *****************************************************************************
extern void(*const g_pfnVectors[]) (void);
__attribute__ ((section(".isr_vector")))
void(*const g_pfnVectors[]) (void) = {
	// Core Level - CM4/CM3
	&_vStackTop,	                // The initial stack pointer
	ResetISR,						// The reset handler
	NMI_Handler,					// The NMI handler
	HardFault_Handler,				// The hard fault handler
	MemManage_Handler,				// The MPU fault handler
	BusFault_Handler,				// The bus fault handler
	UsageFault_Handler,				// The usage fault handler
	0,								// Reserved
	0,								// Reserved
	0,								// Reserved
	0,								// Reserved
	SVC_Handler,					// SVCall handler
	DebugMon_Handler,				// Debug monitor handler
	0,								// Reserved
	PendSV_Handler,					// The PendSV handler
	SysTick_Handler,				// The SysTick handler

	// Chip Level - LPC18xx/43xx
	DAC_IRQHandler,					// 16 D/A Converter
	MX_CORE_IRQHandler,				// 17 CortexM4/M0 (LPC43XX ONLY)
	DMA_IRQHandler,					// 18 General Purpose DMA
	0,								// 19 Reserved
	FLASHEEPROM_IRQHandler,			// 20 ORed flash Bank A, flash Bank B, EEPROM interrupts
	ETH_IRQHandler,					// 21 Ethernet
	SDIO_IRQHandler,				// 22 SD/MMC
	LCD_IRQHandler,					// 23 LCD
	USB0_IRQHandler,				// 24 USB0
	USB1_IRQHandler,				// 25 USB1
	SCT_IRQHandler,					// 26 State Configurable Timer
	RIT_IRQHandler,					// 27 Repetitive Interrupt Timer
	TIMER0_IRQHandler,				// 28 Timer0
	TIMER1_IRQHandler,				// 29 Timer 1
	TIMER2_IRQHandler,				// 30 Timer 2
	TIMER3_IRQHandler,				// 31 Timer 3
	MCPWM_IRQHandler,				// 32 Motor Control PWM
	ADC0_IRQHandler,				// 33 A/D Converter 0
	I2C0_IRQHandler,				// 34 I2C0
	I2C1_IRQHandler,				// 35 I2C1
	SPI_IRQHandler,					// 36 SPI (LPC43XX ONLY)
	ADC1_IRQHandler,				// 37 A/D Converter 1
	SSP0_IRQHandler,				// 38 SSP0 
	SSP1_IRQHandler,				// 39 SSP1
	UART0_IRQHandler,				// 40 UART0
	UART1_IRQHandler,				// 41 UART1
	UART2_IRQHandler,				// 42 UART2
	UART3_IRQHandler,				// 43 USRT3
	I2S0_IRQHandler,				// 44 I2S0
	I2S1_IRQHandler,				// 45 I2S1
	SPIFI_IRQHandler,				// 46 SPI Flash Interface
	SGPIO_IRQHandler,				// 47 SGPIO (LPC43XX ONLY)
	GPIO0_IRQHandler,				// 48 GPIO0
	GPIO1_IRQHandler,				// 49 GPIO1
	GPIO2_IRQHandler,				// 50 GPIO2
	GPIO3_IRQHandler,				// 51 GPIO3 
	GPIO4_IRQHandler,				// 52 GPIO4
	GPIO5_IRQHandler,				// 53 GPIO5
	GPIO6_IRQHandler,				// 54 GPIO6
	GPIO7_IRQHandler,				// 55 GPIO7
	GINT0_IRQHandler,				// 56 GINT0
	GINT1_IRQHandler,				// 57 GINT1
	EVRT_IRQHandler,				// 58 Event Router
	CAN1_IRQHandler,				// 59 C_CAN1
	0,								// 60 Reserved
	0,				                // 61 Reserved 
	ATIMER_IRQHandler,				// 62 ATIMER
	RTC_IRQHandler,					// 63 RTC
	0,								// 64 Reserved
	WDT_IRQHandler,					// 65 WDT
	0,								// 66 Reserved
	CAN0_IRQHandler,				// 67 C_CAN0
	QEI_IRQHandler,					// 68 QEI
};

//*****************************************************************************
// Functions to carry out the initialization of RW and BSS data sections. These
// are written as separate functions rather than being inlined within the
// ResetISR() function in order to cope with MCUs with multiple banks of
// memory.
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void data_init(unsigned int romstart, unsigned int start, unsigned int len) {
	unsigned int *pulDest = (unsigned int*) start;
	unsigned int *pulSrc = (unsigned int*) romstart;
	unsigned int loop;
	for (loop = 0; loop < len; loop = loop + 4)
		*pulDest++ = *pulSrc++;
}

__attribute__ ((section(".after_vectors")))
void bss_init(unsigned int start, unsigned int len) {
	unsigned int *pulDest = (unsigned int*) start;
	unsigned int loop;
	for (loop = 0; loop < len; loop = loop + 4)
		*pulDest++ = 0;
}

//*****************************************************************************
// The following symbols are constructs generated by the linker, indicating
// the location of various points in the "Global Section Table". This table is
// created by the linker via the Code Red managed linker script mechanism. It
// contains the load address, execution address and length of each RW data
// section and the execution and length of each BSS (zero initialized) section.
//*****************************************************************************
extern unsigned int __data_section_table;
extern unsigned int __data_section_table_end;
extern unsigned int __bss_section_table;
extern unsigned int __bss_section_table_end;

//*****************************************************************************
// Reset entry point for your code.
// Sets up a simple runtime environment and initializes the C/C++
// library.
//
//*****************************************************************************
void
ResetISR(void) {

// *************************************************************
// The following conditional block of code manually resets as
// much of the peripheral set of the LPC18 as possible. This is
// done because the LPC18 does not provide a means of triggering
// a full system reset under debugger control, which can cause
// problems in certain circumstances when debugging.
//
// You can prevent this code block being included if you require
// (for example when creating a final executable which you will
// not debug) by setting the define 'DONT_RESET_ON_RESTART'.
//
#ifndef DONT_RESET_ON_RESTART

	// Disable interrupts
	__asm volatile ("cpsid i");
	// equivalent to CMSIS '__disable_irq()' function

	unsigned int *RESET_CONTROL = (unsigned int *) 0x40053100;
	// LPC_RGU->RESET_CTRL0 @ 0x40053100
	// LPC_RGU->RESET_CTRL1 @ 0x40053104
	// Note that we do not use the CMSIS register access mechanism,
	// as there is no guarantee that the project has been configured
	// to use CMSIS.

	// Write to LPC_RGU->RESET_CTRL0
	*(RESET_CONTROL+0) = 0x10DF0000;
	// GPIO_RST|AES_RST|ETHERNET_RST|SDIO_RST|DMA_RST|
	// USB1_RST|USB0_RST|LCD_RST

	// Write to LPC_RGU->RESET_CTRL1
	*(RESET_CONTROL+1) = 0x00DFF7FF;
	// CAN0_RST|CAN1_RST|I2S_RST|SSP1_RST|SSP0_RST|
	// I2C1_RST|I2C0_RST|UART3_RST|UART1_RST|UART1_RST|UART0_RST|
	// DAC_RST|ADC1_RST|ADC0_RST|QEI_RST|MOTOCONPWM_RST|SCT_RST|
	// RITIMER_RST|TIMER3_RST|TIMER2_RST|TIMER1_RST|TIMER0_RST

	// Clear all pending interrupts in the NVIC
	volatile unsigned int *NVIC_ICPR = (unsigned int *) 0xE000E280;
	unsigned int irqpendloop;
	for (irqpendloop = 0; irqpendloop < 8; irqpendloop++) {
		*(NVIC_ICPR+irqpendloop)= 0xFFFFFFFF;
	}

	// Reenable interrupts
	__asm volatile ("cpsie i");
	// equivalent to CMSIS '__enable_irq()' function

#endif  // ifndef DONT_RESET_ON_RESTART
// *************************************************************


    //
    // Copy the data sections from flash to SRAM.
    //
	unsigned int LoadAddr, ExeAddr, SectionLen;
	unsigned int *SectionTableAddr;

	// Load base address of Global Section Table
	SectionTableAddr = &__data_section_table;

    // Copy the data sections from flash to SRAM.
	while (SectionTableAddr < &__data_section_table_end) {
		LoadAddr = *SectionTableAddr++;
		ExeAddr = *SectionTableAddr++;
		SectionLen = *SectionTableAddr++;
		data_init(LoadAddr, ExeAddr, SectionLen);
	}
	// At this point, SectionTableAddr = &__bss_section_table;
	// Zero fill the bss segment
	while (SectionTableAddr < &__bss_section_table_end) {
		ExeAddr = *SectionTableAddr++;
		SectionLen = *SectionTableAddr++;
		bss_init(ExeAddr, SectionLen);
	}

	// ******************************
	// Check to see if we are running the code from a non-zero
        // address (eg RAM, external flash), in which case we need
        // to modify the VTOR register to tell the CPU that the
        // vector table is located at a non-0x0 address.

	// Note that we do not use the CMSIS register access mechanism,
	// as there is no guarantee that the project has been configured
	// to use CMSIS.
	unsigned int * pSCB_VTOR = (unsigned int *) 0xE000ED08;
	if ((unsigned int *)g_pfnVectors!=(unsigned int *) 0x00000000) {
		// CMSIS : SCB->VTOR = <address of vector table>
		*pSCB_VTOR = (unsigned int)g_pfnVectors;
	}

#ifdef __USE_CMSIS
	SystemInit();
#endif

#if defined (__cplusplus)
	//
	// Call C++ library initialisation
	//
	__libc_init_array();
#endif

#if defined (__REDLIB__)
	// Call the Redlib library, which in turn calls main()
	__main() ;
#else
	main();
#endif

	//
	// main() shouldn't return, but if it does, we'll just enter an infinite loop
	//
	while (1) {
		;
	}
}

//*****************************************************************************
// Default exception handlers. Override the ones here by defining your own
// handler routines in your application code.
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void NMI_Handler(void)
{
    while(1)
    {
    }
}
__attribute__ ((section(".after_vectors")))
void HardFault_Handler(void)
{
    __asm volatile
    (
        " tst lr, #4                                                \n"
        " ite eq                                                    \n"
        " mrseq r0, msp                                             \n"
        " mrsne r0, psp                                             \n"
        " ldr r1, [r0, #24]                                         \n"
        " ldr r2, handler2_address_const                            \n"
        " bx r2                                                     \n"
        " handler2_address_const: .word prvGetRegistersFromStack    \n"
    );
}

__attribute__ ((section(".after_vectors")))
void MemManage_Handler(void)
{
    while(1)
    {
    }
}
__attribute__ ((section(".after_vectors")))
void BusFault_Handler(void)
{
    while(1)
    {
    }
}
__attribute__ ((section(".after_vectors")))
void UsageFault_Handler(void)
{
    while(1)
    {
    }
}
__attribute__ ((section(".after_vectors")))
void SVCall_Handler(void)
{
    while(1)
    {
    }
}
__attribute__ ((section(".after_vectors")))
void DebugMon_Handler(void)
{
    while(1)
    {
    }
}
__attribute__ ((section(".after_vectors")))
void PendSV_Handler(void)
{
    while(1)
    {
    }
}
__attribute__ ((section(".after_vectors")))
void SysTick_Handler(void)
{
    while(1)
    {
    }
}

//*****************************************************************************
//
// Processor ends up here if an unexpected interrupt occurs or a specific
// handler is not present in the application code.
//
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void IntDefaultHandler(void)
{
    while(1)
    {
    }
}

/* Debug functions. */
void prvGetRegistersFromStack( uint32_t *pulFaultStackAddress )
{
/* These are volatile to try and prevent the compiler/linker optimising them
away as the variables never actually get used.  If the debugger won't show the
values of the variables, make them global my moving their declaration outside
of this function. */
volatile uint32_t r0;
volatile uint32_t r1;
volatile uint32_t r2;
volatile uint32_t r3;
volatile uint32_t r12;
volatile uint32_t lr; /* Link register. */
volatile uint32_t pc; /* Program counter. */
volatile uint32_t psr;/* Program status register. */

    r0 = pulFaultStackAddress[ 0 ];
    r1 = pulFaultStackAddress[ 1 ];
    r2 = pulFaultStackAddress[ 2 ];
    r3 = pulFaultStackAddress[ 3 ];

    r12 = pulFaultStackAddress[ 4 ];
    lr = pulFaultStackAddress[ 5 ];
    pc = pulFaultStackAddress[ 6 ];
    psr = pulFaultStackAddress[ 7 ];

    /* When the following line is hit, the variables contain the register values. */
    for( ;; )
    {
    	( void ) r0;
    	( void ) r1;
    	( void ) r2;
    	( void ) r3;
    	( void ) r12;
    	( void ) lr;
    	( void ) pc;
    	( void ) psr;
    };
}