blob: e9ba9ae7299279968438bee3d6b59bc6fddd3e7c [file] [log] [blame]
FreeRTOS V8.0.1 - Copyright (C) 2014 Real Time Engineers Ltd.
All rights reserved
* *
* FreeRTOS provides completely free yet professionally developed, *
* robust, strictly quality controlled, supported, and cross *
* platform software that has become a de facto standard. *
* *
* Help yourself get started quickly and support the FreeRTOS *
* project by purchasing a FreeRTOS tutorial book, reference *
* manual, or both from: *
* *
* Thank you! *
* *
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.
>>! NOTE: The modification to the GPL is included to allow you to !<<
>>! distribute a combined work that includes FreeRTOS without being !<<
>>! obliged to provide the source code for proprietary components !<<
>>! outside of the FreeRTOS kernel. !<<
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Full license text is available from the following
1 tab == 4 spaces!
* *
* Having a problem? Start by reading the FAQ "My application does *
* not run, what could be wrong?" *
* *
* *
* *
*************************************************************************** - Documentation, books, training, latest versions,
license and Real Time Engineers Ltd. contact details. - A selection of FreeRTOS ecosystem products,
including FreeRTOS+Trace - an indispensable productivity tool, a DOS
compatible FAT file system, and our tiny thread aware UDP/IP stack. - Real Time Engineers ltd license FreeRTOS to High
Integrity Systems to sell under the OpenRTOS brand. Low cost OpenRTOS
licenses offer ticketed support, indemnification and middleware. - High Integrity Systems also provide a safety
engineered and independently SIL3 certified version for use in safety and
mission critical applications that require provable dependability.
1 tab == 4 spaces!
* Application specific definitions.
* These definitions should be adjusted for your particular hardware and
* application requirements.
* The bottom of this file contains some constants specific to running the UDP
* stack in this demo. Constants specific to FreeRTOS+UDP itself (rather than
* the demo) are contained in FreeRTOSIPConfig.h.
#define configUSE_PREEMPTION 1
#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 7 )
#define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */
#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 60 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the Win32 thread. */
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 32U * 1024U ) )
#define configMAX_TASK_NAME_LEN ( 7 )
#define configUSE_TRACE_FACILITY 1
#define configUSE_16_BIT_TICKS 0
#define configIDLE_SHOULD_YIELD 1
#define configUSE_CO_ROUTINES 0
#define configUSE_MUTEXES 1
#define configQUEUE_REGISTRY_SIZE 0
#define configUSE_ALTERNATIVE_API 0
/* Hook function related definitions. */
#define configUSE_TICK_HOOK 0
#define configUSE_IDLE_HOOK 1
#define configUSE_MALLOC_FAILED_HOOK 1
#define configCHECK_FOR_STACK_OVERFLOW 0 /* Not applicable to the Win32 port. */
/* Software timer related definitions. */
#define configUSE_TIMERS 1
#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )
#define configTIMER_QUEUE_LENGTH 5
/* Run time stats gathering definitions. */
unsigned long ulGetRunTimeCounterValue( void );
void vConfigureTimerForRunTimeStats( void );
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() vConfigureTimerForRunTimeStats()
#define portGET_RUN_TIME_COUNTER_VALUE() ulGetRunTimeCounterValue()
/* Co-routine definitions. */
#define configUSE_CO_ROUTINES 0
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */
#define INCLUDE_vTaskPrioritySet 1
#define INCLUDE_uxTaskPriorityGet 1
#define INCLUDE_vTaskDelete 1
#define INCLUDE_vTaskCleanUpResources 0
#define INCLUDE_vTaskSuspend 1
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#define INCLUDE_uxTaskGetStackHighWaterMark 1
#define INCLUDE_xTaskGetSchedulerState 1
#define INCLUDE_xTimerGetTimerTaskHandle 0
#define INCLUDE_xTaskGetIdleTaskHandle 0
#define INCLUDE_xQueueGetMutexHolder 1
/* This demo makes use of one or more example stats formatting functions. These
format the raw data provided by the uxTaskGetSystemState() function in to human
readable ASCII form. See the notes in the implementation of vTaskList() within
FreeRTOS/Source/tasks.c for limitations. */
/* Assert call defined for debug builds. */
#ifdef _DEBUG
extern void vAssertCalled( void );
#define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled()
#endif /* _DEBUG */
/* Application specific definitions follow. **********************************/
/* If configINCLUDE_DEMO_DEBUG_STATS is set to one, then a few basic IP trace
macros are defined to gather some UDP stack statistics that can then be viewed
through the CLI interface. */
/* The size of the global output buffer that is available for use when there
are multiple command interpreters running at once (for example, one on a UART
and one on TCP/IP). This is done to prevent an output buffer being defined by
each implementation - which would waste RAM. In this case, there is only one
command interpreter running, and it has its own local output buffer, so the
global buffer is just set to be one byte long as it is not used and should not
take up unnecessary RAM. */
/* Only used when running in the FreeRTOS Windows simulator. Defines the
priority of the task used to simulate Ethernet interrupts. */
/* This demo creates a virtual network connection by accessing the raw Ethernet
or WiFi data to and from a real network connection. Many computers have more
than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell
the demo which real port should be used to create the virtual port. The ports
available are displayed on the console when the application is executed. For
example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 1
results in the wired network being used, while setting
configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being
used. */
/* The address of an echo server that will be used by the two demo echo client
tasks. */
#define configECHO_SERVER_ADDR0 10
#define configECHO_SERVER_ADDR1 134
#define configECHO_SERVER_ADDR2 134
#define configECHO_SERVER_ADDR3 71
/* Default MAC address configuration. The demo creates a virtual network
connection that uses this MAC address by accessing the raw Ethernet/WiFi data
to and from a real network connection on the host PC. See the
configNETWORK_INTERFACE_TO_USE definition above for information on how to
configure the real network connection to use. */
#define configMAC_ADDR0 0x00
#define configMAC_ADDR1 0x11
#define configMAC_ADDR2 0x22
#define configMAC_ADDR3 0x33
#define configMAC_ADDR4 0x44
#define configMAC_ADDR5 0x55
/* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or
ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */
#define configIP_ADDR0 172
#define configIP_ADDR1 25
#define configIP_ADDR2 218
#define configIP_ADDR3 200
/* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to
0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */
#define configGATEWAY_ADDR0 192
#define configGATEWAY_ADDR1 168
#define configGATEWAY_ADDR2 1
#define configGATEWAY_ADDR3 1
/* Default DNS server configuration. OpenDNS addresses are and Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set
to 1 but a DNS server cannot be contacted.*/
#define configDNS_SERVER_ADDR0 208
#define configDNS_SERVER_ADDR1 67
#define configDNS_SERVER_ADDR2 222
#define configDNS_SERVER_ADDR3 222
/* Defalt netmask configuration. Used in ipconfigUSE_DNS is set to 0, or
ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */
#define configNET_MASK0 255
#define configNET_MASK1 255
#define configNET_MASK2 255
#define configNET_MASK3 0
/* Provided to guard prints to the console with a semaphore. */
void vOutputString( char *pcMessage );
#endif /* FREERTOS_CONFIG_H */