/******************************************************************************
*
* Copyright (C) 2010 - 2015 Xilinx, Inc.  All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* XILINX  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xscugic.c
* @addtogroup scugic_v3_1
* @{
*
* Contains required functions for the XScuGic driver for the Interrupt
* Controller. See xscugic.h for a detailed description of the driver.
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver   Who  Date     Changes
* ----- ---- -------- --------------------------------------------------------
* 1.00a drg  01/19/10 First release
* 1.01a sdm  11/09/11 Changes are made in function XScuGic_CfgInitialize. Since
*		      "Config" entry is now made as pointer in the XScuGic
*		      structure, necessary changes are made.
*		      The HandlerTable can now be populated through the low
*		      level routine XScuGic_RegisterHandler added in this
*		      release. Hence necessary checks are added not to
*		      overwrite the HandlerTable entriesin function
*		      XScuGic_CfgInitialize.
* 1.03a srt  02/27/13 Added APIs
*			- XScuGic_SetPriTrigTypeByDistAddr()
*			- XScuGic_GetPriTrigTypeByDistAddr()
* 		      Removed Offset calculation macros, defined in _hw.h
*		      (CR 702687)
*			  Added support to direct interrupts to the appropriate CPU. Earlier
*			  interrupts were directed to CPU1 (hard coded). Now depending
*			  upon the CPU selected by the user (xparameters.h), interrupts
*			  will be directed to the relevant CPU. This fixes CR 699688.
*
* 1.04a hk   05/04/13 Assigned EffectiveAddr to CpuBaseAddress in
*			  XScuGic_CfgInitialize. Fix for CR#704400 to remove warnings.
*			  Moved functions XScuGic_SetPriTrigTypeByDistAddr and
*             XScuGic_GetPriTrigTypeByDistAddr to xscugic_hw.c.
*			  This is fix for CR#705621.
* 1.06a asa  16/11/13 Fix for CR#749178. Assignment for EffectiveAddr
*			  in function XScuGic_CfgInitialize is removed as it was
*		      a bug.
* 3.00  kvn  02/13/14 Modified code for MISRA-C:2012 compliance.
* 3.01	pkp	 06/19/15 Added XScuGic_InterruptMaptoCpu API for an interrupt
*			  target CPU mapping
* 3.02	pkp	 11/09/15 Modified DistributorInit function for AMP case to add
*					  the current cpu to interrupt processor targets registers
* 3.2   asa  02/29/16 Modified DistributorInit function for Zynq AMP case. The
*			  distributor is left uninitialized for Zynq AMP. It is assumed
*             that the distributor will be initialized by Linux master. However
*             for CortexR5 case, the earlier code is left unchanged where the
*             the interrupt processor target registers in the distributor is
*             initialized with the corresponding CPU ID on which the application
*             built over the scugic driver runs.
*             These changes fix CR#937243.
*
*
* </pre>
*
******************************************************************************/

/***************************** Include Files *********************************/
#include "xil_types.h"
#include "xil_assert.h"
#include "xscugic.h"
#include "xparameters.h"

/************************** Constant Definitions *****************************/


/**************************** Type Definitions *******************************/


/***************** Macros (Inline Functions) Definitions *********************/

/************************** Variable Definitions *****************************/

/************************** Function Prototypes ******************************/

static void StubHandler(void *CallBackRef);

/*****************************************************************************/
/**
*
* DistributorInit initializes the distributor of the GIC. The
* initialization entails:
*
* - Write the trigger mode, priority and target CPU
* - All interrupt sources are disabled
* - Enable the distributor
*
* @param	InstancePtr is a pointer to the XScuGic instance.
* @param	CpuID is the Cpu ID to be initialized.
*
* @return	None
*
* @note		None.
*
******************************************************************************/
static void DistributorInit(XScuGic *InstancePtr, u32 CpuID)
{
	u32 Int_Id;
	u32 LocalCpuID = CpuID;

#if USE_AMP==1
	#warning "Building GIC for AMP"
#ifdef ARMR5
    u32 RegValue;

	/*
	 * The overall distributor should not be initialized in AMP case where
	 * another CPU is taking care of it.
	 */
	LocalCpuID |= LocalCpuID << 8U;
	LocalCpuID |= LocalCpuID << 16U;
	for (Int_Id = 32U; Int_Id<XSCUGIC_MAX_NUM_INTR_INPUTS;Int_Id=Int_Id+4U) {
		RegValue = XScuGic_DistReadReg(InstancePtr,
						XSCUGIC_SPI_TARGET_OFFSET_CALC(Int_Id));
		RegValue |= LocalCpuID;
		XScuGic_DistWriteReg(InstancePtr,
				     XSCUGIC_SPI_TARGET_OFFSET_CALC(Int_Id),
				     RegValue);
	}
#endif
	return;
#endif

	Xil_AssertVoid(InstancePtr != NULL);
	XScuGic_DistWriteReg(InstancePtr, XSCUGIC_DIST_EN_OFFSET, 0U);

	/*
	 * Set the security domains in the int_security registers for
	 * non-secure interrupts
	 * All are secure, so leave at the default. Set to 1 for non-secure
	 * interrupts.
	 */

	/*
	 * For the Shared Peripheral Interrupts INT_ID[MAX..32], set:
	 */

	/*
	 * 1. The trigger mode in the int_config register
	 * Only write to the SPI interrupts, so start at 32
	 */
	for (Int_Id = 32U; Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS; Int_Id=Int_Id+16U) {
		/*
		 * Each INT_ID uses two bits, or 16 INT_ID per register
		 * Set them all to be level sensitive, active HIGH.
		 */
		XScuGic_DistWriteReg(InstancePtr,
					XSCUGIC_INT_CFG_OFFSET_CALC(Int_Id),
					0U);
	}


#define DEFAULT_PRIORITY    0xa0a0a0a0U
	for (Int_Id = 0U; Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS; Int_Id=Int_Id+4U) {
		/*
		 * 2. The priority using int the priority_level register
		 * The priority_level and spi_target registers use one byte per
		 * INT_ID.
		 * Write a default value that can be changed elsewhere.
		 */
		XScuGic_DistWriteReg(InstancePtr,
					XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id),
					DEFAULT_PRIORITY);
	}

	for (Int_Id = 32U; Int_Id<XSCUGIC_MAX_NUM_INTR_INPUTS;Int_Id=Int_Id+4U) {
		/*
		 * 3. The CPU interface in the spi_target register
		 * Only write to the SPI interrupts, so start at 32
		 */
		LocalCpuID |= LocalCpuID << 8U;
		LocalCpuID |= LocalCpuID << 16U;

		XScuGic_DistWriteReg(InstancePtr,
				     XSCUGIC_SPI_TARGET_OFFSET_CALC(Int_Id),
				     LocalCpuID);
	}

	for (Int_Id = 0U; Int_Id<XSCUGIC_MAX_NUM_INTR_INPUTS;Int_Id=Int_Id+32U) {
		/*
		 * 4. Enable the SPI using the enable_set register. Leave all
		 * disabled for now.
		 */
		XScuGic_DistWriteReg(InstancePtr,
		XSCUGIC_EN_DIS_OFFSET_CALC(XSCUGIC_DISABLE_OFFSET, Int_Id),
			0xFFFFFFFFU);

	}

	XScuGic_DistWriteReg(InstancePtr, XSCUGIC_DIST_EN_OFFSET,
						XSCUGIC_EN_INT_MASK);

}

/*****************************************************************************/
/**
*
* CPUInitialize initializes the CPU Interface of the GIC. The initialization entails:
*
*	- Set the priority of the CPU
*	- Enable the CPU interface
*
* @param	InstancePtr is a pointer to the XScuGic instance.
*
* @return	None
*
* @note		None.
*
******************************************************************************/
static void CPUInitialize(XScuGic *InstancePtr)
{
	/*
	 * Program the priority mask of the CPU using the Priority mask register
	 */
	XScuGic_CPUWriteReg(InstancePtr, XSCUGIC_CPU_PRIOR_OFFSET, 0xF0U);


	/*
	 * If the CPU operates in both security domains, set parameters in the
	 * control_s register.
	 * 1. Set FIQen=1 to use FIQ for secure interrupts,
	 * 2. Program the AckCtl bit
	 * 3. Program the SBPR bit to select the binary pointer behavior
	 * 4. Set EnableS = 1 to enable secure interrupts
	 * 5. Set EnbleNS = 1 to enable non secure interrupts
	 */

	/*
	 * If the CPU operates only in the secure domain, setup the
	 * control_s register.
	 * 1. Set FIQen=1,
	 * 2. Set EnableS=1, to enable the CPU interface to signal secure interrupts.
	 * Only enable the IRQ output unless secure interrupts are needed.
	 */
	XScuGic_CPUWriteReg(InstancePtr, XSCUGIC_CONTROL_OFFSET, 0x07U);

}

/*****************************************************************************/
/**
*
* CfgInitialize a specific interrupt controller instance/driver. The
* initialization entails:
*
* - Initialize fields of the XScuGic structure
* - Initial vector table with stub function calls
* - All interrupt sources are disabled
*
* @param	InstancePtr is a pointer to the XScuGic instance.
* @param	ConfigPtr is a pointer to a config table for the particular
*		device this driver is associated with.
* @param	EffectiveAddr is the device base address in the virtual memory
*		address space. The caller is responsible for keeping the address
*		mapping from EffectiveAddr to the device physical base address
*		unchanged once this function is invoked. Unexpected errors may
*		occur if the address mapping changes after this function is
*		called. If address translation is not used, use
*		Config->BaseAddress for this parameters, passing the physical
*		address instead.
*
* @return
*		- XST_SUCCESS if initialization was successful
*
* @note		None.
*
******************************************************************************/
s32  XScuGic_CfgInitialize(XScuGic *InstancePtr,
				XScuGic_Config *ConfigPtr,
				u32 EffectiveAddr)
{
	u32 Int_Id;
	u32 Cpu_Id = (u32)XPAR_CPU_ID + (u32)1;
	(void) EffectiveAddr;

	Xil_AssertNonvoid(InstancePtr != NULL);
	Xil_AssertNonvoid(ConfigPtr != NULL);

	if(InstancePtr->IsReady != XIL_COMPONENT_IS_READY) {

		InstancePtr->IsReady = 0;
		InstancePtr->Config = ConfigPtr;


		for (Int_Id = 0U; Int_Id<XSCUGIC_MAX_NUM_INTR_INPUTS;Int_Id++) {
			/*
			* Initalize the handler to point to a stub to handle an
			* interrupt which has not been connected to a handler. Only
			* initialize it if the handler is 0 which means it was not
			* initialized statically by the tools/user. Set the callback
			* reference to this instance so that unhandled interrupts
			* can be tracked.
			*/
			if 	((InstancePtr->Config->HandlerTable[Int_Id].Handler == NULL)) {
				InstancePtr->Config->HandlerTable[Int_Id].Handler =
									StubHandler;
			}
			InstancePtr->Config->HandlerTable[Int_Id].CallBackRef =
								InstancePtr;
		}

		DistributorInit(InstancePtr, Cpu_Id);
		CPUInitialize(InstancePtr);

		InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
	}

	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* Makes the connection between the Int_Id of the interrupt source and the
* associated handler that is to run when the interrupt is recognized. The
* argument provided in this call as the Callbackref is used as the argument
* for the handler when it is called.
*
* @param	InstancePtr is a pointer to the XScuGic instance.
* @param	Int_Id contains the ID of the interrupt source and should be
*		in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
* @param	Handler to the handler for that interrupt.
* @param	CallBackRef is the callback reference, usually the instance
*		pointer of the connecting driver.
*
* @return
*
*		- XST_SUCCESS if the handler was connected correctly.
*
* @note
*
* WARNING: The handler provided as an argument will overwrite any handler
* that was previously connected.
*
****************************************************************************/
s32  XScuGic_Connect(XScuGic *InstancePtr, u32 Int_Id,
                      Xil_InterruptHandler Handler, void *CallBackRef)
{
	/*
	 * Assert the arguments
	 */
	Xil_AssertNonvoid(InstancePtr != NULL);
	Xil_AssertNonvoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
	Xil_AssertNonvoid(Handler != NULL);
	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);

	/*
	 * The Int_Id is used as an index into the table to select the proper
	 * handler
	 */
	InstancePtr->Config->HandlerTable[Int_Id].Handler = Handler;
	InstancePtr->Config->HandlerTable[Int_Id].CallBackRef = CallBackRef;

	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* Updates the interrupt table with the Null Handler and NULL arguments at the
* location pointed at by the Int_Id. This effectively disconnects that interrupt
* source from any handler. The interrupt is disabled also.
*
* @param	InstancePtr is a pointer to the XScuGic instance to be worked on.
* @param	Int_Id contains the ID of the interrupt source and should
*		be in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
*
* @return	None.
*
* @note		None.
*
****************************************************************************/
void XScuGic_Disconnect(XScuGic *InstancePtr, u32 Int_Id)
{
	u32 Mask;

	/*
	 * Assert the arguments
	 */
	Xil_AssertVoid(InstancePtr != NULL);
	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);

	/*
	 * The Int_Id is used to create the appropriate mask for the
	 * desired bit position. Int_Id currently limited to 0 - 31
	 */
	Mask = 0x00000001U << (Int_Id % 32U);

	/*
	 * Disable the interrupt such that it won't occur while disconnecting
	 * the handler, only disable the specified interrupt id without modifying
	 * the other interrupt ids
	 */
	XScuGic_DistWriteReg(InstancePtr, (u32)XSCUGIC_DISABLE_OFFSET +
						((Int_Id / 32U) * 4U), Mask);

	/*
	 * Disconnect the handler and connect a stub, the callback reference
	 * must be set to this instance to allow unhandled interrupts to be
	 * tracked
	 */
	InstancePtr->Config->HandlerTable[Int_Id].Handler = StubHandler;
	InstancePtr->Config->HandlerTable[Int_Id].CallBackRef = InstancePtr;
}

/*****************************************************************************/
/**
*
* Enables the interrupt source provided as the argument Int_Id. Any pending
* interrupt condition for the specified Int_Id will occur after this function is
* called.
*
* @param	InstancePtr is a pointer to the XScuGic instance.
* @param	Int_Id contains the ID of the interrupt source and should be
*		in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
*
* @return	None.
*
* @note		None.
*
****************************************************************************/
void XScuGic_Enable(XScuGic *InstancePtr, u32 Int_Id)
{
	u32 Mask;

	/*
	 * Assert the arguments
	 */
	Xil_AssertVoid(InstancePtr != NULL);
	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);

	/*
	 * The Int_Id is used to create the appropriate mask for the
	 * desired bit position. Int_Id currently limited to 0 - 31
	 */
	Mask = 0x00000001U << (Int_Id % 32U);

	/*
	 * Enable the selected interrupt source by setting the
	 * corresponding bit in the Enable Set register.
	 */
	XScuGic_DistWriteReg(InstancePtr, (u32)XSCUGIC_ENABLE_SET_OFFSET +
						((Int_Id / 32U) * 4U), Mask);
}

/*****************************************************************************/
/**
*
* Disables the interrupt source provided as the argument Int_Id such that the
* interrupt controller will not cause interrupts for the specified Int_Id. The
* interrupt controller will continue to hold an interrupt condition for the
* Int_Id, but will not cause an interrupt.
*
* @param	InstancePtr is a pointer to the XScuGic instance.
* @param	Int_Id contains the ID of the interrupt source and should be
*		in the range of 0 to XSCUGIC_MAX_NUM_INTR_INPUTS - 1
*
* @return	None.
*
* @note		None.
*
****************************************************************************/
void XScuGic_Disable(XScuGic *InstancePtr, u32 Int_Id)
{
	u32 Mask;

	/*
	 * Assert the arguments
	 */
	Xil_AssertVoid(InstancePtr != NULL);
	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);

	/*
	 * The Int_Id is used to create the appropriate mask for the
	 * desired bit position. Int_Id currently limited to 0 - 31
	 */
	Mask = 0x00000001U << (Int_Id % 32U);

	/*
	 * Disable the selected interrupt source by setting the
	 * corresponding bit in the IDR.
	 */
	XScuGic_DistWriteReg(InstancePtr, (u32)XSCUGIC_DISABLE_OFFSET +
						((Int_Id / 32U) * 4U), Mask);
}

/*****************************************************************************/
/**
*
* Allows software to simulate an interrupt in the interrupt controller.  This
* function will only be successful when the interrupt controller has been
* started in simulation mode.  A simulated interrupt allows the interrupt
* controller to be tested without any device to drive an interrupt input
* signal into it.
*
* @param	InstancePtr is a pointer to the XScuGic instance.
* @param	Int_Id is the software interrupt ID to simulate an interrupt.
* @param	Cpu_Id is the list of CPUs to send the interrupt.
*
* @return
*
* XST_SUCCESS if successful, or XST_FAILURE if the interrupt could not be
* simulated
*
* @note		None.
*
******************************************************************************/
s32  XScuGic_SoftwareIntr(XScuGic *InstancePtr, u32 Int_Id, u32 Cpu_Id)
{
	u32 Mask;

	/*
	 * Assert the arguments
	 */
	Xil_AssertNonvoid(InstancePtr != NULL);
	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
	Xil_AssertNonvoid(Int_Id <= 15U) ;
	Xil_AssertNonvoid(Cpu_Id <= 255U) ;


	/*
	 * The Int_Id is used to create the appropriate mask for the
	 * desired interrupt. Int_Id currently limited to 0 - 15
	 * Use the target list for the Cpu ID.
	 */
	Mask = ((Cpu_Id << 16U) | Int_Id) &
		(XSCUGIC_SFI_TRIG_CPU_MASK | XSCUGIC_SFI_TRIG_INTID_MASK);

	/*
	 * Write to the Software interrupt trigger register. Use the appropriate
	 * CPU Int_Id.
	 */
	XScuGic_DistWriteReg(InstancePtr, XSCUGIC_SFI_TRIG_OFFSET, Mask);

	/* Indicate the interrupt was successfully simulated */

	return XST_SUCCESS;
}

/*****************************************************************************/
/**
*
* A stub for the asynchronous callback. The stub is here in case the upper
* layers forget to set the handler.
*
* @param	CallBackRef is a pointer to the upper layer callback reference
*
* @return	None.
*
* @note		None.
*
******************************************************************************/
static void StubHandler(void *CallBackRef) {
	/*
	 * verify that the inputs are valid
	 */
	Xil_AssertVoid(CallBackRef != NULL);

	/*
	 * Indicate another unhandled interrupt for stats
	 */
	((XScuGic *)((void *)CallBackRef))->UnhandledInterrupts++;
}

/****************************************************************************/
/**
* Sets the interrupt priority and trigger type for the specificd IRQ source.
*
* @param	InstancePtr is a pointer to the instance to be worked on.
* @param	Int_Id is the IRQ source number to modify
* @param	Priority is the new priority for the IRQ source. 0 is highest
* 			priority, 0xF8 (248) is lowest. There are 32 priority levels
*			supported with a step of 8. Hence the supported priorities are
*			0, 8, 16, 32, 40 ..., 248.
* @param	Trigger is the new trigger type for the IRQ source.
* Each bit pair describes the configuration for an INT_ID.
* SFI    Read Only    b10 always
* PPI    Read Only    depending on how the PPIs are configured.
*                    b01    Active HIGH level sensitive
*                    b11 Rising edge sensitive
* SPI                LSB is read only.
*                    b01    Active HIGH level sensitive
*                    b11 Rising edge sensitive/
*
* @return	None.
*
* @note		None.
*
*****************************************************************************/
void XScuGic_SetPriorityTriggerType(XScuGic *InstancePtr, u32 Int_Id,
					u8 Priority, u8 Trigger)
{
	u32 RegValue;
	u8 LocalPriority;
	LocalPriority = Priority;

	Xil_AssertVoid(InstancePtr != NULL);
	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
	Xil_AssertVoid(Trigger <= (u8)XSCUGIC_INT_CFG_MASK);
	Xil_AssertVoid(LocalPriority <= (u8)XSCUGIC_MAX_INTR_PRIO_VAL);

	/*
	 * Determine the register to write to using the Int_Id.
	 */
	RegValue = XScuGic_DistReadReg(InstancePtr,
			XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id));

	/*
	 * The priority bits are Bits 7 to 3 in GIC Priority Register. This
	 * means the number of priority levels supported are 32 and they are
	 * in steps of 8. The priorities can be 0, 8, 16, 32, 48, ... etc.
	 * The lower order 3 bits are masked before putting it in the register.
	 */
	LocalPriority = LocalPriority & (u8)XSCUGIC_INTR_PRIO_MASK;
	/*
	 * Shift and Mask the correct bits for the priority and trigger in the
	 * register
	 */
	RegValue &= ~(XSCUGIC_PRIORITY_MASK << ((Int_Id%4U)*8U));
	RegValue |= (u32)LocalPriority << ((Int_Id%4U)*8U);

	/*
	 * Write the value back to the register.
	 */
	XScuGic_DistWriteReg(InstancePtr, XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id),
				RegValue);

	/*
	 * Determine the register to write to using the Int_Id.
	 */
	RegValue = XScuGic_DistReadReg(InstancePtr,
			XSCUGIC_INT_CFG_OFFSET_CALC (Int_Id));

	/*
	 * Shift and Mask the correct bits for the priority and trigger in the
	 * register
	 */
	RegValue &= ~(XSCUGIC_INT_CFG_MASK << ((Int_Id%16U)*2U));
	RegValue |= (u32)Trigger << ((Int_Id%16U)*2U);

	/*
	 * Write the value back to the register.
	 */
	XScuGic_DistWriteReg(InstancePtr, XSCUGIC_INT_CFG_OFFSET_CALC(Int_Id),
				RegValue);

}

/****************************************************************************/
/**
* Gets the interrupt priority and trigger type for the specificd IRQ source.
*
* @param	InstancePtr is a pointer to the instance to be worked on.
* @param	Int_Id is the IRQ source number to modify
* @param	Priority is a pointer to the value of the priority of the IRQ
*		source. This is a return value.
* @param	Trigger is pointer to the value of the trigger of the IRQ
*		source. This is a return value.
*
* @return	None.
*
* @note		None
*
*****************************************************************************/
void XScuGic_GetPriorityTriggerType(XScuGic *InstancePtr, u32 Int_Id,
					u8 *Priority, u8 *Trigger)
{
	u32 RegValue;

	Xil_AssertVoid(InstancePtr != NULL);
	Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
	Xil_AssertVoid(Int_Id < XSCUGIC_MAX_NUM_INTR_INPUTS);
	Xil_AssertVoid(Priority != NULL);
	Xil_AssertVoid(Trigger != NULL);

	/*
	 * Determine the register to read to using the Int_Id.
	 */
	RegValue = XScuGic_DistReadReg(InstancePtr,
	    XSCUGIC_PRIORITY_OFFSET_CALC(Int_Id));

	/*
	 * Shift and Mask the correct bits for the priority and trigger in the
	 * register
	 */
	RegValue = RegValue >> ((Int_Id%4U)*8U);
	*Priority = (u8)(RegValue & XSCUGIC_PRIORITY_MASK);

	/*
	 * Determine the register to read to using the Int_Id.
	 */
	RegValue = XScuGic_DistReadReg(InstancePtr,
	XSCUGIC_INT_CFG_OFFSET_CALC (Int_Id));

	/*
	 * Shift and Mask the correct bits for the priority and trigger in the
	 * register
	 */
	RegValue = RegValue >> ((Int_Id%16U)*2U);

	*Trigger = (u8)(RegValue & XSCUGIC_INT_CFG_MASK);
}
/****************************************************************************/
/**
* Sets the target CPU for the interrupt of a peripheral
*
* @param	InstancePtr is a pointer to the instance to be worked on.
* @param	Cpu_Id is a CPU number for which the interrupt has to be targeted
* @param	Int_Id is the IRQ source number to modify
*
* @return	None.
*
* @note		None
*
*****************************************************************************/
void XScuGic_InterruptMaptoCpu(XScuGic *InstancePtr, u8 Cpu_Id, u32 Int_Id)
{
	u32 RegValue, Offset;
	RegValue = XScuGic_DistReadReg(InstancePtr,
			XSCUGIC_SPI_TARGET_OFFSET_CALC(Int_Id));

	Offset =  (Int_Id & 0x3);

	RegValue = (RegValue | (~(0xFF << (Offset*8))) );
	RegValue |= ((Cpu_Id) << (Offset*8));

	XScuGic_DistWriteReg(InstancePtr,
						 XSCUGIC_SPI_TARGET_OFFSET_CALC(Int_Id),
						 RegValue);
}
/** @} */