/*
 * -------------------------------------------
 *    MSP432 DriverLib - v3_10_00_09 
 * -------------------------------------------
 *
 * --COPYRIGHT--,BSD,BSD
 * Copyright (c) 2014, Texas Instruments Incorporated
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * *  Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * *  Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * *  Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * --/COPYRIGHT--*/
#include <cpu.h>
#include <msp.h>
#include <stdint.h>

//*****************************************************************************
//
// Wrapper function for the CPSID instruction.  Returns the state of PRIMASK
// on entry.
//
//*****************************************************************************
#if defined(__GNUC__)
uint32_t __attribute__((naked)) CPU_cpsid(void)
{
    uint32_t ret;

    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
            "    cpsid   i\n"
            "    bx      lr\n"
            : "=r" (ret));

    //
    // The return is handled in the inline assembly, but the compiler will
    // still complain if there is not an explicit return here (despite the fact
    // that this does not result in any code being produced because of the
    // naked attribute).
    //
    return(ret);
}
#endif
#if defined(__ICCARM__)
uint32_t CPU_cpsid(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
            "    cpsid   i\n");

    //
    // "Warning[Pe940]: missing return statement at end of non-void function"
    // is suppressed here to avoid putting a "bx lr" in the inline assembly
    // above and a superfluous return statement here.
    //
#pragma diag_suppress=Pe940
}
#pragma diag_default=Pe940
#endif
#if defined(__CC_ARM)
__asm uint32_t CPU_cpsid(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    mrs r0, PRIMASK;
    cpsid i;
    bx lr
}
#endif
#if defined(__TI_ARM__)
uint32_t CPU_cpsid(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
            "    cpsid   i\n"
            "    bx      lr\n");

    //
    // The following keeps the compiler happy, because it wants to see a
    // return value from this function.  It will generate code to return
    // a zero.  However, the real return is the "bx lr" above, so the
    // return(0) is never executed and the function returns with the value
    // you expect in R0.
    //
    return(0);
}
#endif

//*****************************************************************************
//
// Wrapper function returning the state of PRIMASK (indicating whether
// interrupts are enabled or disabled).
//
//*****************************************************************************
#if defined(__GNUC__)
uint32_t __attribute__((naked)) CPU_primask(void)
{
    uint32_t ret;

    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
            "    bx      lr\n"
            : "=r" (ret));

    //
    // The return is handled in the inline assembly, but the compiler will
    // still complain if there is not an explicit return here (despite the fact
    // that this does not result in any code being produced because of the
    // naked attribute).
    //
    return(ret);
}
#endif
#if defined(__ICCARM__)
uint32_t CPU_primask(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n");

    //
    // "Warning[Pe940]: missing return statement at end of non-void function"
    // is suppressed here to avoid putting a "bx lr" in the inline assembly
    // above and a superfluous return statement here.
    //
#pragma diag_suppress=Pe940
}
#pragma diag_default=Pe940
#endif
#if defined(__CC_ARM)
__asm uint32_t CPU_primask(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    mrs r0, PRIMASK;
    bx lr
}
#endif
#if defined(__TI_ARM__)
uint32_t CPU_primask(void)
{
    //
    // Read PRIMASK and disable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
            "    bx      lr\n");

    //
    // The following keeps the compiler happy, because it wants to see a
    // return value from this function.  It will generate code to return
    // a zero.  However, the real return is the "bx lr" above, so the
    // return(0) is never executed and the function returns with the value
    // you expect in R0.
    //
    return(0);
}
#endif

//*****************************************************************************
//
// Wrapper function for the CPSIE instruction.  Returns the state of PRIMASK
// on entry.
//
//*****************************************************************************
#if defined(__GNUC__)
uint32_t __attribute__((naked)) CPU_cpsie(void)
{
    uint32_t ret;

    //
    // Read PRIMASK and enable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
            "    cpsie   i\n"
            "    bx      lr\n"
            : "=r" (ret));

    //
    // The return is handled in the inline assembly, but the compiler will
    // still complain if there is not an explicit return here (despite the fact
    // that this does not result in any code being produced because of the
    // naked attribute).
    //
    return(ret);
}
#endif
#if defined(__ICCARM__)
uint32_t CPU_cpsie(void)
{
    //
    // Read PRIMASK and enable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
            "    cpsie   i\n");

    //
    // "Warning[Pe940]: missing return statement at end of non-void function"
    // is suppressed here to avoid putting a "bx lr" in the inline assembly
    // above and a superfluous return statement here.
    //
#pragma diag_suppress=Pe940
}
#pragma diag_default=Pe940
#endif
#if defined(__CC_ARM)
__asm uint32_t CPU_cpsie(void)
{
    //
    // Read PRIMASK and enable interrupts.
    //
    mrs r0, PRIMASK;
    cpsie i;
    bx lr
}
#endif
#if defined(__TI_ARM__)
uint32_t CPU_cpsie(void)
{
    //
    // Read PRIMASK and enable interrupts.
    //
    __asm("    mrs     r0, PRIMASK\n"
            "    cpsie   i\n"
            "    bx      lr\n");

    //
    // The following keeps the compiler happy, because it wants to see a
    // return value from this function.  It will generate code to return
    // a zero.  However, the real return is the "bx lr" above, so the
    // return(0) is never executed and the function returns with the value
    // you expect in R0.
    //
    return(0);
}
#endif

//*****************************************************************************
//
// Wrapper function for the CPUWFI instruction.
//
//*****************************************************************************
#if defined(__GNUC__)
void __attribute__((naked)) CPU_wfi(void)
{
    //
    // Wait for the next interrupt.
    //
    __asm("    wfi\n"
            "    bx      lr\n");
}
#endif
#if defined(__ICCARM__)
void CPU_wfi(void)
{
    //
    // Wait for the next interrupt.
    //
    __asm("    wfi\n");
}
#endif
#if defined(__CC_ARM)
__asm void CPU_wfi(void)
{
    //
    // Wait for the next interrupt.
    //
    wfi;
    bx lr
}
#endif
#if defined(__TI_ARM__)
void CPU_wfi(void)
{
    //
    // Wait for the next interrupt.
    //
    __asm("    wfi\n");
}
#endif

//*****************************************************************************
//
// Wrapper function for writing the BASEPRI register.
//
//*****************************************************************************
#if defined(__GNUC__)
void __attribute__((naked)) CPU_basepriSet(uint32_t newBasepri)
{
    //
    // Set the BASEPRI register
    //
    __asm("    msr     BASEPRI, r0\n"
            "    bx      lr\n");
}
#endif
#if defined(__ICCARM__)
void CPU_basepriSet(uint32_t newBasepri)
{
    //
    // Set the BASEPRI register
    //
    __asm("    msr     BASEPRI, r0\n");
}
#endif
#if defined(__CC_ARM)
__asm void CPU_basepriSet(uint32_t newBasepri)
{
    //
    // Set the BASEPRI register
    //
    msr BASEPRI, r0;
    bx lr
}
#endif
#if defined(__TI_ARM__)
void CPU_basepriSet(uint32_t newBasepri)
{
    //
    // Set the BASEPRI register
    //
    __asm("    msr     BASEPRI, r0\n");
}
#endif

//*****************************************************************************
//
// Wrapper function for reading the BASEPRI register.
//
//*****************************************************************************
#if defined(__GNUC__)
uint32_t __attribute__((naked)) CPU_basepriGet(void)
{
    uint32_t ret;

    //
    // Read BASEPRI
    //
    __asm("    mrs     r0, BASEPRI\n"
            "    bx      lr\n"
            : "=r" (ret));

    //
    // The return is handled in the inline assembly, but the compiler will
    // still complain if there is not an explicit return here (despite the fact
    // that this does not result in any code being produced because of the
    // naked attribute).
    //
    return(ret);
}
#endif
#if defined(__ICCARM__)
uint32_t CPU_basepriGet(void)
{
    //
    // Read BASEPRI
    //
    __asm("    mrs     r0, BASEPRI\n");

    //
    // "Warning[Pe940]: missing return statement at end of non-void function"
    // is suppressed here to avoid putting a "bx lr" in the inline assembly
    // above and a superfluous return statement here.
    //
#pragma diag_suppress=Pe940
}
#pragma diag_default=Pe940
#endif
#if defined(__CC_ARM)
__asm uint32_t CPU_basepriGet(void)
{
    //
    // Read BASEPRI
    //
    mrs r0, BASEPRI;
    bx lr
}
#endif
#if defined(__TI_ARM__)
uint32_t CPU_basepriGet(void)
{
    //
    // Read BASEPRI
    //
    __asm("    mrs     r0, BASEPRI\n"
            "    bx      lr\n");

    //
    // The following keeps the compiler happy, because it wants to see a
    // return value from this function.  It will generate code to return
    // a zero.  However, the real return is the "bx lr" above, so the
    // return(0) is never executed and the function returns with the value
    // you expect in R0.
    //
    return(0);
}
#endif