/**
 * \file
 *
 * \brief SAME70-XPLD Board Definition.
 *
 * Copyright (c) 2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */

#ifndef _SAME70_XPLD_H_
#define _SAME70_XPLD_H_

#include "compiler.h"
#include "system_same70.h"

/*----------------------------------------------------------------------------*/
/**
 *  \page same70_xplained_pro_opfreq "SAME70-XPLD - Operating frequencies"
 *  This page lists several definition related to the board operating frequency
 *
 *  \section Definitions
 *  - \ref BOARD_FREQ_*
 *  - \ref BOARD_MCK
 */

/** Board oscillator settings */
#define BOARD_FREQ_SLCK_XTAL            (32768U)
#define BOARD_FREQ_SLCK_BYPASS          (32768U)
#define BOARD_FREQ_MAINCK_XTAL          (12000000U)
#define BOARD_FREQ_MAINCK_BYPASS        (12000000U)

/** Master clock frequency */
#define BOARD_MCK                       CHIP_FREQ_CPU_MAX

/** board main clock xtal statup time */
#define BOARD_OSC_STARTUP_US            15625

/*----------------------------------------------------------------------------*/
/**
 * \page same70_xplained_info "SAME70-XPLD - Board informations"
 * This page lists several definition related to the board description.
 *
 * \section Definitions
 * - \ref BOARD_NAME
 */

/** Name of the board */
#define BOARD_NAME "SAME70-XPLD"
/** Board definition */
#define same70xpld
/** Family definition (already defined) */
#define same70
/** Core definition */
#define cortexm7

/*----------------------------------------------------------------------------*/

#define CONSOLE_UART               USART1
#define CONSOLE_UART_ID            ID_USART1
/** USART1 pins definitions, PA21,PB4. */
#define USART1_RXD_GPIO   PIO_PA21_IDX
#define USART1_RXD_FLAGS  IOPORT_MODE_MUX_A
#define USART1_TXD_GPIO   PIO_PB4_IDX
#define USART1_TXD_FLAGS  IOPORT_MODE_MUX_D

/** USART0 pins definitions, PB0,PB1. */
#define USART0_RXD_GPIO   PIO_PB0_IDX
#define USART0_RXD_FLAGS  IOPORT_MODE_MUX_C
#define USART0_TXD_GPIO   PIO_PB1_IDX
#define USART0_TXD_FLAGS  IOPORT_MODE_MUX_C

#define PIN_USART0_SCK_IDX    (PIO_PB13_IDX)
#define PIN_USART0_SCK_FLAGS  (IOPORT_MODE_MUX_C)

/** USART0 pin CTS */
#define PIN_USART0_CTS_IDX    (PIO_PB2_IDX)
#define PIN_USART0_CTS_FLAGS  (IOPORT_MODE_MUX_C)

/** USART0 pin RTS */
#define PIN_USART0_RTS_IDX    (PIO_PB3_IDX)
#define PIN_USART0_RTS_FLAGS  (IOPORT_MODE_MUX_C)


//! \name LED definitions
//@{
#define LED0_GPIO            (PIO_PC8_IDX)
#define LED0_FLAGS           (0)
#define LED0_ACTIVE_LEVEL    (IOPORT_PIN_LEVEL_LOW)
#define LED0_INACTIVE_LEVEL  (IOPORT_PIN_LEVEL_HIGH)

#define	LED_COUNT			 (1)
//@}

//! \name SW0 definitions
//@{
#define SW0_PIN                   (PIO_PA11_IDX)
#define SW0_ACTIVE                (IOPORT_PIN_LEVEL_LOW)
#define SW0_INACTIVE              (!SW0_ACTIVE)
#define SW0_SUPC_INPUT            2

/**
 * Wrapper macros for SW0, to ensure common naming across all Xplained
 * boards.
 */
#define PIN_SW0      {PIO_PA11, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
#define PIN_SW0_MASK PIO_PA11
#define PIN_SW0_PIO  PIOA
#define PIN_SW0_ID   ID_PIOA
#define PIN_SW0_TYPE PIO_INPUT
#define PIN_SW0_ATTR (PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
//@}

/**
 * \name LED #0 definitions
 *
 * Wrapper macros for LED0, to ensure common naming across all Xplained
 * boards.
 */
//@{
#define LED_0_NAME                "LED0 (yellow)"
#define LED_0_PIN                 LED0_GPIO
#define LED_0_ACTIVE              LED0_ACTIVE_LEVEL
#define LED_0_INACTIVE            LED0_INACTIVE_LEVEL

#define PIN_LED_0       {PIO_PC8, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_LED_0_MASK  PIO_PC8
#define PIN_LED_0_PIO   PIOA
#define PIN_LED_0_ID    ID_PIOA
#define PIN_LED_0_TYPE  PIO_OUTPUT_1
#define PIN_LED_0_ATTR  PIO_DEFAULT
//@}

/* TC-- Timer Count */
#define PIN_TC0_TIOA0        (PIO_PA0_IDX)
#define PIN_TC0_TIOA0_MUX    (IOPORT_MODE_MUX_B)
#define PIN_TC0_TIOA0_FLAGS  (IOPORT_MODE_MUX_B)

#define PIN_TC0_TIOA0_PIO    PIOA
#define PIN_TC0_TIOA0_MASK   PIO_PA0
#define PIN_TC0_TIOA0_ID     ID_PIOA
#define PIN_TC0_TIOA0_TYPE   PIO_PERIPH_B
#define PIN_TC0_TIOA0_ATTR   PIO_DEFAULT

#define PIN_TC3_TIOA11	(PIO_PD21_IDX)
#define PIN_TC3_TIOA11_MUX	(IOPORT_MODE_MUX_C)
#define PIN_TC3_TIOA11_FLAGS	(IOPORT_MODE_MUX_C)

#define PIN_TC3_TIOA11_PIO	PIOD
#define PIN_TC3_TIOA11_MASK	PIO_PD21
#define PIN_TC3_TIOA11_ID	ID_PIOD
#define PIN_TC3_TIOA11_TYPE	PIO_PERIPH_C
#define PIN_TC3_TIOA11_ATTR	PIO_DEFAULT

//! Number of on-board LEDs
#define BOARD_NUM_OF_LED 1

/**
 * Push button #0 definition. Attributes = pull-up + debounce + interrupt on
 * rising edge.
 */
#define BUTTON_0_NAME             "SW0"
#define BUTTON_0_PIN              SW0_PIN
#define BUTTON_0_ACTIVE           SW0_ACTIVE
#define BUTTON_0_INACTIVE         SW0_INACTIVE
#define BUTTON_0_SUPC_INPUT       SW0_SUPC_INPUT
#define GPIO_PUSH_BUTTON_0        BUTTON_0_PIN

#define PUSHBUTTON_1_NAME        "SW0"
#define PUSHBUTTON_1_WKUP_LINE   (2)
#define PUSHBUTTON_1_WKUP_FSTT   (PMC_FSMR_FSTT2)
#define GPIO_PUSH_BUTTON_1       (PIO_PA11_IDX)
#define GPIO_PUSH_BUTTON_1_FLAGS (IOPORT_MODE_PULLUP | IOPORT_MODE_DEBOUNCE)
#define GPIO_PUSH_BUTTON_1_SENSE (IOPORT_SENSE_RISING)

#define PIN_PUSHBUTTON_1       {PIO_PA11, PIOA, ID_PIOA, PIO_INPUT, \
								PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE}
#define PIN_PUSHBUTTON_1_MASK  PIO_PA11
#define PIN_PUSHBUTTON_1_PIO   PIOA
#define PIN_PUSHBUTTON_1_ID    ID_PIOA
#define PIN_PUSHBUTTON_1_TYPE  PIO_INPUT
#define PIN_PUSHBUTTON_1_ATTR  (PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_RISE_EDGE)
#define PIN_PUSHBUTTON_1_IRQn  PIOA_IRQn

/** List of all push button definitions. */
#define PINS_PUSHBUTTONS    {PIN_PUSHBUTTON_1}

/** PCK0 pin definition (PA6) */
#define PIN_PCK0         (PIO_PA6_IDX)
#define PIN_PCK0_MUX     (IOPORT_MODE_MUX_B)
#define PIN_PCK0_FLAGS   (IOPORT_MODE_MUX_B)
#define PIN_PCK0_PORT    IOPORT_PIOA
#define PIN_PCK0_MASK    PIO_PA6B_PCK0
#define PIN_PCK0_PIO     PIOA
#define PIN_PCK0_ID      ID_PIOA
#define PIN_PCK0_TYPE    PIO_PERIPH_B
#define PIN_PCK0_ATTR    PIO_DEFAULT


/** TWI0 pins definition */
#define TWIHS0_DATA_GPIO   PIO_PA3_IDX
#define TWIHS0_DATA_FLAGS  (IOPORT_MODE_MUX_A)
#define TWIHS0_CLK_GPIO    PIO_PA4_IDX
#define TWIHS0_CLK_FLAGS   (IOPORT_MODE_MUX_A)

/** SPI0 pins definition */
#define SPI0_MISO_GPIO    PIO_PD20_IDX
#define SPI0_MISO_FLAGS  (IOPORT_MODE_MUX_B)
#define SPI0_MOSI_GPIO    PIO_PD21_IDX
#define SPI0_MOSI_FLAGS  (IOPORT_MODE_MUX_B)
#define SPI0_NPCS0_GPIO   PIO_PB2_IDX
#define SPI0_NPCS0_FLAGS  (IOPORT_MODE_MUX_D)
#define SPI0_NPCS1_GPIO   PIO_PD25_IDX
#define SPI0_NPCS1_FLAGS  (IOPORT_MODE_MUX_B)
#define SPI0_NPCS2_GPIO   PIO_PD12_IDX
#define SPI0_NPCS2_FLAGS  (IOPORT_MODE_MUX_C)
#define SPI0_NPCS3_GPIO   PIO_PD27_IDX
#define SPI0_NPCS3_FLAGS  (IOPORT_MODE_MUX_B)
#define SPI0_SPCK_GPIO    PIO_PD22_IDX
#define SPI0_SPCK_FLAGS  (IOPORT_MODE_MUX_B)

/** QSPI pins definition */
#define QSPI_QSCK_GPIO    PIO_PA14_IDX
#define QSPI_QSCK_FLAGS   (IOPORT_MODE_MUX_A)
#define QSPI_QCS_GPIO     PIO_PA11_IDX
#define QSPI_QCS_FLAGS    (IOPORT_MODE_MUX_A)
#define QSPI_QIO0_GPIO    PIO_PA13_IDX
#define QSPI_QIO0_FLAGS   (IOPORT_MODE_MUX_A)
#define QSPI_QIO1_GPIO    PIO_PA12_IDX
#define QSPI_QIO1_FLAGS   (IOPORT_MODE_MUX_A)
#define QSPI_QIO2_GPIO    PIO_PA17_IDX
#define QSPI_QIO2_FLAGS   (IOPORT_MODE_MUX_A)
#define QSPI_QIO3_GPIO    PIO_PD31_IDX
#define QSPI_QIO3_FLAGS   (IOPORT_MODE_MUX_A)

/** AFEC channel for potentiometer */
#define AFEC_CHANNEL_POTENTIOMETER  AFEC_CHANNEL_0

#define MCAN_MODULE              MCAN1
/*----------------------------------------------------------------------------*/
/**
 * \page same70_xpld_CAN "SAME70-XPLD - CAN"
 * This page lists definitions related to CAN0 and CAN1.
 *
 * CAN
 * - \ref PIN_CAN0_TRANSCEIVER_RXEN
 * - \ref PIN_CAN0_TRANSCEIVER_RS
 * - \ref PIN_CAN0_TXD
 * - \ref PIN_CAN0_RXD
 * - \ref PINS_CAN0
 *
 * - \ref PIN_CAN1_TRANSCEIVER_RXEN
 * - \ref PIN_CAN1_TRANSCEIVER_RS
 * - \ref PIN_CAN1_TXD
 * - \ref PIN_CAN1_RXD
 * - \ref PINS_CAN1
 */
/** CAN0 transceiver PIN RS. */
#define PIN_CAN0_TR_RS_IDX        PIO_PE0_IDX
#define PIN_CAN0_TR_RS_FLAGS      IOPORT_DIR_OUTPUT

/** CAN0 transceiver PIN EN. */
#define PIN_CAN0_TR_EN_IDX        PIO_PE1_IDX
#define PIN_CAN0_TR_EN_FLAGS      IOPORT_DIR_OUTPUT

/** CAN0 PIN RX. */
#define PIN_CAN0_RX_IDX           PIO_PB3_IDX
#define PIN_CAN0_RX_FLAGS         IOPORT_MODE_MUX_A

/** CAN0 PIN TX. */
#define PIN_CAN0_TX_IDX           PIO_PB2_IDX
#define PIN_CAN0_TX_FLAGS         IOPORT_MODE_MUX_A

/** CAN1 transceiver PIN RS. */
#define PIN_CAN1_TR_RS_IDX        PIO_PE2_IDX
#define PIN_CAN1_TR_RS_FLAGS      IOPORT_DIR_OUTPUT

/** CAN1 transceiver PIN EN. */
#define PIN_CAN1_TR_EN_IDX        PIO_PE3_IDX
#define PIN_CAN1_TR_EN_FLAGS      IOPORT_DIR_OUTPUT

/** CAN1 PIN RX. */
#define PIN_CAN1_RX_IDX           PIO_PC12_IDX
#define PIN_CAN1_RX_FLAGS         IOPORT_MODE_MUX_C

/** CAN1 PIN TX. */
#define PIN_CAN1_TX_IDX           PIO_PC14_IDX
#define PIN_CAN1_TX_FLAGS         IOPORT_MODE_MUX_C

/** PWM LED0 pin definitions. */
#define PIN_PWM_LED0_GPIO    PIO_PA23_IDX
#define PIN_PWM_LED0_FLAGS   (IOPORT_MODE_MUX_B)
#define PIN_PWM_LED0_CHANNEL PWM_CHANNEL_0

/** PWM LED1 pin definitions. */
#define PIN_PWM_LED1_GPIO    PIO_PA24_IDX
#define PIN_PWM_LED1_FLAGS   (IOPORT_MODE_MUX_B)
#define PIN_PWM_LED1_CHANNEL PWM_CHANNEL_1

/*----------------------------------------------------------------------------*/
/** GMAC HW configurations */
#define BOARD_GMAC_PHY_ADDR   0

#define PIN_GMAC_RESET_MASK   PIO_PC10
#define PIN_GMAC_RESET_PIO    PIOC
#define PIN_GMAC_INT_MASK     PIO_PA14
#define PIN_GMAC_INT_PIO      PIOA
#define PIN_GMAC_PERIPH       PIO_PERIPH_A
#define PIN_GMAC_PIO          PIOD
#define PIN_GMAC_MASK         (PIO_PD0A_GTXCK | PIO_PD1A_GTXEN | PIO_PD2A_GTX0 | \
						       PIO_PD3A_GTX1 | PIO_PD4A_GRXDV | PIO_PD5A_GRX0 |  \
						       PIO_PD6A_GRX1 | PIO_PD7A_GRXER | PIO_PD8A_GMDC | \
						       PIO_PD9A_GMDIO)

/** Board configuration of the AT24MAC EEPROM */
#define BOARD_AT24MAC_TWIHS               TWIHS0
#define BOARD_AT24MAC_ADDRESS             (0xBE >> 1)
#define BOARD_AT24MAC_TWIHS_CLK           (400000UL)
#define BOARD_AT24MAC_PAGE_SIZE           16

/** HSMCI pins definition. */
/*! Number of slot connected on HSMCI interface */
#define SD_MMC_HSMCI_MEM_CNT            1
#define SD_MMC_HSMCI_SLOT_0_SIZE        4
/** HSMCI MCCDA pin definition. */
#define PIN_HSMCI_MCCDA_GPIO            (PIO_PA28_IDX)
#define PIN_HSMCI_MCCDA_FLAGS           (IOPORT_MODE_MUX_C)
/** HSMCI MCCK pin definition. */
#define PIN_HSMCI_MCCK_GPIO             (PIO_PA25_IDX)
#define PIN_HSMCI_MCCK_FLAGS            (IOPORT_MODE_MUX_D)
/** HSMCI MCDA0 pin definition. */
#define PIN_HSMCI_MCDA0_GPIO            (PIO_PA30_IDX)
#define PIN_HSMCI_MCDA0_FLAGS           (IOPORT_MODE_MUX_C)
/** HSMCI MCDA1 pin definition. */
#define PIN_HSMCI_MCDA1_GPIO            (PIO_PA31_IDX)
#define PIN_HSMCI_MCDA1_FLAGS           (IOPORT_MODE_MUX_C)
/** HSMCI MCDA2 pin definition. */
#define PIN_HSMCI_MCDA2_GPIO            (PIO_PA26_IDX)
#define PIN_HSMCI_MCDA2_FLAGS           (IOPORT_MODE_MUX_C)
/** HSMCI MCDA3 pin definition. */
#define PIN_HSMCI_MCDA3_GPIO            (PIO_PA27_IDX)
#define PIN_HSMCI_MCDA3_FLAGS           (IOPORT_MODE_MUX_C)

/** SD/MMC card detect pin definition. */
#define PIN_HSMCI_CD                    {PIO_PC16, PIOD, ID_PIOD, PIO_INPUT, PIO_PULLUP}
#define SD_MMC_0_CD_GPIO                (PIO_PC16_IDX)
#define SD_MMC_0_CD_PIO_ID              ID_PIOD
#define SD_MMC_0_CD_FLAGS               (IOPORT_MODE_PULLUP)
#define SD_MMC_0_CD_DETECT_VALUE        0

/** EBI pins configuration for LCD */
/** LCD reset pin */
#define PIN_EBI_RESET_MASK	  PIO_PC13
#define PIN_EBI_RESET_PIO	  PIOC
#define PIN_EBI_RESET_TYPE    PIO_OUTPUT_1
#define PIN_EBI_RESET_ATTRI   PIO_DEFAULT

/** LCD command/data select pin */
#define PIN_EBI_CDS_MASK	  PIO_PC30
#define PIN_EBI_CDS_PIO		  PIOC
#define PIN_EBI_CDS_TYPE	  PIO_OUTPUT_1
#define PIN_EBI_CDS_ATTRI	  PIO_DEFAULT

/** LCD data pin */
#define PIN_EBI_DATAL_MASK     0xFF
#define PIN_EBI_DATAL_PIO	   PIOC
#define PIN_EBI_DATAL_TYPE	   PIO_PERIPH_A
#define PIN_EBI_DATAL_ATTRI    PIO_PULLUP

#define PIN_EBI_DATAH_0_MASK   0x3F
#define PIN_EBI_DATAH_0_PIO	   PIOE
#define PIN_EBI_DATAH_0_TYPE   PIO_PERIPH_A
#define PIN_EBI_DATAH_0_ATTRI  PIO_PULLUP

#define PIN_EBI_DATAH_1_MASK   (PIO_PA15A_D14|PIO_PA16A_D15)
#define PIN_EBI_DATAH_1_PIO	   PIOA
#define PIN_EBI_DATAH_1_TYPE   PIO_PERIPH_A
#define PIN_EBI_DATAH_1_ATTRI  PIO_PULLUP

/** LCD WE pin */
#define PIN_EBI_NWE_MASK   PIO_PC8A_NWE
#define PIN_EBI_NWE_PIO	   PIOC
#define PIN_EBI_NWE_TYPE   PIO_PERIPH_A
#define PIN_EBI_NWE_ATTRI  PIO_PULLUP

/** LCD RD pin */
#define PIN_EBI_NRD_MASK   PIO_PC11A_NRD
#define PIN_EBI_NRD_PIO	   PIOC
#define PIN_EBI_NRD_TYPE   PIO_PERIPH_A
#define PIN_EBI_NRD_ATTRI  PIO_PULLUP

/** LCD CS pin (NCS3) */
#define PIN_EBI_CS_MASK   PIO_PD19A_NCS3
#define PIN_EBI_CS_PIO	  PIOD
#define PIN_EBI_CS_TYPE   PIO_PERIPH_A
#define PIN_EBI_CS_ATTRI  PIO_PULLUP

/** Back-light pin definition. */
#define PIN_EBI_BACKLIGHT_MASK   PIO_PC9B_TIOB7
#define PIN_EBI_BACKLIGHT_PIO	  PIOC
#define PIN_EBI_BACKLIGHT_TYPE   PIO_PERIPH_B
#define PIN_EBI_BACKLIGHT_ATTRI  PIO_DEFAULT

/*! \name GPIO Connections of VBUS monitoring
 */
//! @{
#define USB_VBUS_FLAGS         (PIO_INPUT | PIO_PULLUP)
#define USB_VBUS_PIN             PIO_PC9_IDX  /* As IO pin input */
#define USB_VBUS_PIN_IRQn ( PIOC_IRQn)
#define USB_VBUS_PIO_ID       ID_PIOC
#define USB_VBUS_PIO_MASK  PIO_PC9
//! @}

/*! \name GPIO Connections of ID detecting
 */
//! @{
#define USB_ID_FLAGS             (PIO_INPUT | PIO_PULLUP)
#define USB_ID_PIN               PIO_PC16_IDX /* As IO pin input */
#define USB_ID_PIN_IRQn     (PIOC_IRQn)
#define USB_ID_PIO_ID         ID_PIOC
#define USB_ID_PIO_MASK    PIO_PC16
//! @}

/** WM8904 Slave address */
#define WM8904_SLAVE_ADDRESS        (0x34 >> 1)

/** TWI interface for WM8904 */
#define WM8904_TWIHS  TWIHS0

/** WM8904 pins definition */
#define WM8904_TK_PIO       PIO_PB1_IDX
#define WM8904_TK_FLAGS     PIO_PERIPH_D
#define WM8904_TF_PIO       PIO_PB0_IDX
#define WM8904_TF_FLAGS     PIO_PERIPH_D
#define WM8904_TD_PIO       PIO_PD26_IDX
#define WM8904_TD_FLAGS     PIO_PERIPH_B
#define WM8904_RK_PIO       PIO_PA22_IDX
#define WM8904_RK_FLAGS     PIO_PERIPH_A
#define WM8904_RF_PIO       PIO_PD24_IDX
#define WM8904_RF_FLAGS     PIO_PERIPH_B
#define WM8904_RD_PIO       PIO_PA10_IDX
#define WM8904_RD_FLAGS     PIO_PERIPH_C
#define WM8904_PCK2_PIO     PIO_PA18_IDX
#define WM8904_PCK2_FLAGS   PIO_PERIPH_B

/**  Board SDRAM size for MT48LC16M16A2 */
#define BOARD_SDRAM_SIZE        (2 * 1024 * 1024)

/** Address for transferring command bytes to the SDRAM. */
#define BOARD_SDRAM_ADDR     0x70000000

/**  SDRAM pins definitions */
#define SDRAM_BA0_PIO        PIO_PA20_IDX
#define SDRAM_SDCK_PIO       PIO_PD23_IDX
#define SDRAM_SDCKE_PIO      PIO_PD14_IDX
#define SDRAM_SDCS_PIO       PIO_PC15_IDX
#define SDRAM_RAS_PIO        PIO_PD16_IDX
#define SDRAM_CAS_PIO        PIO_PD17_IDX
#define SDRAM_SDWE_PIO       PIO_PD29_IDX
#define SDRAM_NBS0_PIO       PIO_PC18_IDX
#define SDRAM_NBS1_PIO       PIO_PD15_IDX
#define SDRAM_A2_PIO         PIO_PC20_IDX
#define SDRAM_A3_PIO         PIO_PC21_IDX
#define SDRAM_A4_PIO         PIO_PC22_IDX
#define SDRAM_A5_PIO         PIO_PC23_IDX
#define SDRAM_A6_PIO         PIO_PC24_IDX
#define SDRAM_A7_PIO         PIO_PC25_IDX
#define SDRAM_A8_PIO         PIO_PC26_IDX
#define SDRAM_A9_PIO         PIO_PC27_IDX
#define SDRAM_A10_PIO        PIO_PC28_IDX
#define SDRAM_A11_PIO        PIO_PC29_IDX
#define SDRAM_SDA10_PIO      PIO_PD13_IDX
#define SDRAM_D0_PIO         PIO_PC0_IDX
#define SDRAM_D1_PIO         PIO_PC1_IDX
#define SDRAM_D2_PIO         PIO_PC2_IDX
#define SDRAM_D3_PIO         PIO_PC3_IDX
#define SDRAM_D4_PIO         PIO_PC4_IDX
#define SDRAM_D5_PIO         PIO_PC5_IDX
#define SDRAM_D6_PIO         PIO_PC6_IDX
#define SDRAM_D7_PIO         PIO_PC7_IDX
#define SDRAM_D8_PIO         PIO_PE0_IDX
#define SDRAM_D9_PIO         PIO_PE1_IDX
#define SDRAM_D10_PIO        PIO_PE2_IDX
#define SDRAM_D11_PIO        PIO_PE3_IDX
#define SDRAM_D12_PIO        PIO_PE4_IDX
#define SDRAM_D13_PIO        PIO_PE5_IDX
#define SDRAM_D14_PIO        PIO_PA15_IDX
#define SDRAM_D15_PIO        PIO_PA16_IDX

#define SDRAM_BA0_FLAGS      PIO_PERIPH_C
#define SDRAM_SDCK_FLAGS     PIO_PERIPH_C
#define SDRAM_SDCKE_FLAGS    PIO_PERIPH_C
#define SDRAM_SDCS_FLAGS     PIO_PERIPH_A
#define SDRAM_RAS_FLAGS      PIO_PERIPH_C
#define SDRAM_CAS_FLAGS      PIO_PERIPH_C
#define SDRAM_SDWE_FLAGS     PIO_PERIPH_C
#define SDRAM_NBS0_FLAGS     PIO_PERIPH_A
#define SDRAM_NBS1_FLAGS     PIO_PERIPH_C
#define SDRAM_A_FLAGS        PIO_PERIPH_A
#define SDRAM_SDA10_FLAGS    PIO_PERIPH_C
#define SDRAM_D_FLAGS        PIO_PERIPH_A

/** LCD SPI configuration */
#define BOARD_ILI9488_SPI         SPI0
#define BOARD_ILI9488_SPI_IRQN    SPI0_IRQn
#define BOARD_ILI9488_SPI_NPCS    3

/** LCD SPI pins definition */
#define LCD_SPI_MISO_PIO      PIO_PD20_IDX
#define LCD_SPI_MISO_FLAGS    (PIO_PERIPH_B | PIO_DEFAULT)
#define LCD_SPI_MOSI_PIO      PIO_PD21_IDX
#define	LCD_SPI_MOSI_FLAGS    (PIO_PERIPH_B | PIO_DEFAULT)
#define LCD_SPI_SPCK_PIO      PIO_PD22_IDX
#define	LCD_SPI_SPCK_FLAGS    (PIO_PERIPH_B | PIO_DEFAULT)
#define LCD_SPI_NPCS_PIO      PIO_PD27_IDX
#define LCD_SPI_NPCS_FLAGS    (PIO_PERIPH_B | PIO_DEFAULT)

#define LCD_SPI_RESET_PIO     PIO_PA24_IDX
#define LCD_SPI_RESET_FLAGS   (PIO_OUTPUT_1 | PIO_DEFAULT)
#define LCD_SPI_CDS_PIO       PIO_PA6_IDX
#define	LCD_SPI_CDS_FLAGS     (PIO_OUTPUT_1 | PIO_DEFAULT)
#define LCD_SPI_BACKLIGHT_PIO     PIO_PC19_IDX
#define	LCD_SPI_BACKLIGHT_FLAGS   (PIO_OUTPUT_1 | PIO_DEFAULT)


/** TWI interface for maXTouch XPRO */
#define MAXTOUCH_XPRO_TWIHS       TWIHS0

#define MAXTOUCH_XPRO_CHG_PIO     PIO_PA2_IDX

/** BNO055 external interrupt pin definition */
#define PIN_BNO055_EXT_INIERRUPT       {PIO_PD28, PIOD, ID_PIOD, PIO_INPUT, \
										PIO_DEFAULT | PIO_IT_RISE_EDGE}
#define PIN_BNO055_EXT_INIERRUPT_MASK  PIO_PD28
#define PIN_BNO055_EXT_INIERRUPT_PIO   PIOD
#define PIN_BNO055_EXT_INIERRUPT_ID    ID_PIOD
#define PIN_BNO055_EXT_INIERRUPT_TYPE  PIO_INPUT
#define PIN_BNO055_EXT_INIERRUPT_ATTR  (PIO_DEFAULT | PIO_IT_RISE_EDGE)
#define PIN_BNO055_EXT_INIERRUPT_IRQn  PIOD_IRQn

#define BOARD_BNO055_TWIHS              TWIHS0
#define BOARD_BNO055_ID_TWIHS        ID_TWIHS0

/** TWIHS ID for simulated EEPROM application to use */
#define BOARD_AT30TSE_ID_TWIHS         ID_TWIHS0
/** TWIHS Base for simulated TWI EEPROM application to use */
#define BOARD_AT30TSE_TWIHS       TWIHS0

/*----------------------------------------------------------------------------*/
#endif   /* _SAME70_XPLD_H_ */