/******************************************************************************
*
* Copyright (C) 2015 Xilinx, Inc.  All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* Use of the Software is limited solely to applications:
* (a) running on a Xilinx device, or
* (b) that interact with a Xilinx device through a bus or interconnect.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* XILINX CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
* OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Except as contained in this notice, the name of the Xilinx shall not be used
* in advertising or otherwise to promote the sale, use or other dealings in
* this Software without prior written authorization from Xilinx.
*
******************************************************************************/
/****************************************************************************/
/**
*
* @file psu_init.c
*
* This file is automatically generated 
*
*****************************************************************************/

#include <xil_io.h>
#include <sleep.h>
#include "psu_init.h"

int mask_pollOnValue(u32 add , u32 mask, u32 value );

int mask_poll(u32 add , u32 mask );

void mask_delay(u32 delay);

u32 mask_read(u32 add , u32 mask );

static void PSU_Mask_Write (unsigned long offset, unsigned long mask, unsigned long val)
{
	unsigned long RegVal = 0x0;
	RegVal = Xil_In32 (offset);
	RegVal &= ~(mask);
	RegVal |= (val & mask);
	Xil_Out32 (offset, RegVal);
}

	void prog_reg (unsigned long addr, unsigned long mask, unsigned long shift, unsigned long value) {
	    int rdata =0;
	    rdata  = Xil_In32(addr);
	    rdata  = rdata & (~mask);
	    rdata  = rdata | (value << shift);
	    Xil_Out32(addr,rdata);
	    } 

unsigned long psu_pll_init_data() {
		// : RPLL INIT
		/*Register : RPLL_CFG @ 0XFF5E0034</p>

		PLL loop filter resistor control
		PSU_CRL_APB_RPLL_CFG_RES                                                        0x2

		PLL charge pump control
		PSU_CRL_APB_RPLL_CFG_CP                                                         0x3

		PLL loop filter high frequency capacitor control
		PSU_CRL_APB_RPLL_CFG_LFHF                                                       0x3

		Lock circuit counter setting
		PSU_CRL_APB_RPLL_CFG_LOCK_CNT                                                   0x258

		Lock circuit configuration settings for lock windowsize
		PSU_CRL_APB_RPLL_CFG_LOCK_DLY                                                   0x3f

		Helper data. Values are to be looked up in a table from Data Sheet
		(OFFSET, MASK, VALUE)      (0XFF5E0034, 0xFE7FEDEFU ,0x7E4B0C62U)  
		RegMask = (CRL_APB_RPLL_CFG_RES_MASK | CRL_APB_RPLL_CFG_CP_MASK | CRL_APB_RPLL_CFG_LFHF_MASK | CRL_APB_RPLL_CFG_LOCK_CNT_MASK | CRL_APB_RPLL_CFG_LOCK_DLY_MASK |  0 );

		RegVal = ((0x00000002U << CRL_APB_RPLL_CFG_RES_SHIFT
			| 0x00000003U << CRL_APB_RPLL_CFG_CP_SHIFT
			| 0x00000003U << CRL_APB_RPLL_CFG_LFHF_SHIFT
			| 0x00000258U << CRL_APB_RPLL_CFG_LOCK_CNT_SHIFT
			| 0x0000003FU << CRL_APB_RPLL_CFG_LOCK_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
	/*############################################################################################################################ */

		// : UPDATE FB_DIV
		/*Register : RPLL_CTRL @ 0XFF5E0030</p>

		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
		PSU_CRL_APB_RPLL_CTRL_PRE_SRC                                                   0x0

		The integer portion of the feedback divider to the PLL
		PSU_CRL_APB_RPLL_CTRL_FBDIV                                                     0x48

		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
		PSU_CRL_APB_RPLL_CTRL_DIV2                                                      0x1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00717F00U ,0x00014800U)  
		RegMask = (CRL_APB_RPLL_CTRL_PRE_SRC_MASK | CRL_APB_RPLL_CTRL_FBDIV_MASK | CRL_APB_RPLL_CTRL_DIV2_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_PRE_SRC_SHIFT
			| 0x00000048U << CRL_APB_RPLL_CTRL_FBDIV_SHIFT
			| 0x00000001U << CRL_APB_RPLL_CTRL_DIV2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00717F00U ,0x00014800U);
	/*############################################################################################################################ */

		// : BY PASS PLL
		/*Register : RPLL_CTRL @ 0XFF5E0030</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_RPLL_CTRL_BYPASS                                                    1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000008U ,0x00000008U)  
		RegMask = (CRL_APB_RPLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_RPLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
	/*############################################################################################################################ */

		// : ASSERT RESET
		/*Register : RPLL_CTRL @ 0XFF5E0030</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRL_APB_RPLL_CTRL_RESET                                                     1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000001U ,0x00000001U)  
		RegMask = (CRL_APB_RPLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_RPLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		// : DEASSERT RESET
		/*Register : RPLL_CTRL @ 0XFF5E0030</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRL_APB_RPLL_CTRL_RESET                                                     0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000001U ,0x00000000U)  
		RegMask = (CRL_APB_RPLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		// : CHECK PLL STATUS
		/*Register : PLL_STATUS @ 0XFF5E0040</p>

		RPLL is locked
		PSU_CRL_APB_PLL_STATUS_RPLL_LOCK                                                1
		(OFFSET, MASK, VALUE)      (0XFF5E0040, 0x00000002U ,0x00000002U)  */
		mask_poll(CRL_APB_PLL_STATUS_OFFSET,0x00000002U);

	/*############################################################################################################################ */

		// : REMOVE PLL BY PASS
		/*Register : RPLL_CTRL @ 0XFF5E0030</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_RPLL_CTRL_BYPASS                                                    0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0030, 0x00000008U ,0x00000000U)  
		RegMask = (CRL_APB_RPLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RPLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : RPLL_TO_FPD_CTRL @ 0XFF5E0048</p>

		Divisor value for this clock.
		PSU_CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0                                           0x3

		Control for a clock that will be generated in the LPD, but used in the FPD as a clock source for the peripheral clock muxes.
		(OFFSET, MASK, VALUE)      (0XFF5E0048, 0x00003F00U ,0x00000300U)  
		RegMask = (CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_MASK |  0 );

		RegVal = ((0x00000003U << CRL_APB_RPLL_TO_FPD_CTRL_DIVISOR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RPLL_TO_FPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
	/*############################################################################################################################ */

		// : RPLL FRAC CFG
		/*Register : RPLL_FRAC_CFG @ 0XFF5E0038</p>

		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
		 mode and uses DATA of this register for the fractional portion of the feedback divider.
		PSU_CRL_APB_RPLL_FRAC_CFG_ENABLED                                               0x0

		Fractional value for the Feedback value.
		PSU_CRL_APB_RPLL_FRAC_CFG_DATA                                                  0x0

		Fractional control for the PLL
		(OFFSET, MASK, VALUE)      (0XFF5E0038, 0x8000FFFFU ,0x00000000U)  
		RegMask = (CRL_APB_RPLL_FRAC_CFG_ENABLED_MASK | CRL_APB_RPLL_FRAC_CFG_DATA_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RPLL_FRAC_CFG_ENABLED_SHIFT
			| 0x00000000U << CRL_APB_RPLL_FRAC_CFG_DATA_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		// : IOPLL INIT
		/*Register : IOPLL_CFG @ 0XFF5E0024</p>

		PLL loop filter resistor control
		PSU_CRL_APB_IOPLL_CFG_RES                                                       0xc

		PLL charge pump control
		PSU_CRL_APB_IOPLL_CFG_CP                                                        0x3

		PLL loop filter high frequency capacitor control
		PSU_CRL_APB_IOPLL_CFG_LFHF                                                      0x3

		Lock circuit counter setting
		PSU_CRL_APB_IOPLL_CFG_LOCK_CNT                                                  0x339

		Lock circuit configuration settings for lock windowsize
		PSU_CRL_APB_IOPLL_CFG_LOCK_DLY                                                  0x3f

		Helper data. Values are to be looked up in a table from Data Sheet
		(OFFSET, MASK, VALUE)      (0XFF5E0024, 0xFE7FEDEFU ,0x7E672C6CU)  
		RegMask = (CRL_APB_IOPLL_CFG_RES_MASK | CRL_APB_IOPLL_CFG_CP_MASK | CRL_APB_IOPLL_CFG_LFHF_MASK | CRL_APB_IOPLL_CFG_LOCK_CNT_MASK | CRL_APB_IOPLL_CFG_LOCK_DLY_MASK |  0 );

		RegVal = ((0x0000000CU << CRL_APB_IOPLL_CFG_RES_SHIFT
			| 0x00000003U << CRL_APB_IOPLL_CFG_CP_SHIFT
			| 0x00000003U << CRL_APB_IOPLL_CFG_LFHF_SHIFT
			| 0x00000339U << CRL_APB_IOPLL_CFG_LOCK_CNT_SHIFT
			| 0x0000003FU << CRL_APB_IOPLL_CFG_LOCK_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E672C6CU);
	/*############################################################################################################################ */

		// : UPDATE FB_DIV
		/*Register : IOPLL_CTRL @ 0XFF5E0020</p>

		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
		PSU_CRL_APB_IOPLL_CTRL_PRE_SRC                                                  0x0

		The integer portion of the feedback divider to the PLL
		PSU_CRL_APB_IOPLL_CTRL_FBDIV                                                    0x2d

		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
		PSU_CRL_APB_IOPLL_CTRL_DIV2                                                     0x0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00717F00U ,0x00002D00U)  
		RegMask = (CRL_APB_IOPLL_CTRL_PRE_SRC_MASK | CRL_APB_IOPLL_CTRL_FBDIV_MASK | CRL_APB_IOPLL_CTRL_DIV2_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_PRE_SRC_SHIFT
			| 0x0000002DU << CRL_APB_IOPLL_CTRL_FBDIV_SHIFT
			| 0x00000000U << CRL_APB_IOPLL_CTRL_DIV2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00717F00U ,0x00002D00U);
	/*############################################################################################################################ */

		// : BY PASS PLL
		/*Register : IOPLL_CTRL @ 0XFF5E0020</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_IOPLL_CTRL_BYPASS                                                   1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000008U ,0x00000008U)  
		RegMask = (CRL_APB_IOPLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_IOPLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
	/*############################################################################################################################ */

		// : ASSERT RESET
		/*Register : IOPLL_CTRL @ 0XFF5E0020</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRL_APB_IOPLL_CTRL_RESET                                                    1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000001U ,0x00000001U)  
		RegMask = (CRL_APB_IOPLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_IOPLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		// : DEASSERT RESET
		/*Register : IOPLL_CTRL @ 0XFF5E0020</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRL_APB_IOPLL_CTRL_RESET                                                    0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000001U ,0x00000000U)  
		RegMask = (CRL_APB_IOPLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		// : CHECK PLL STATUS
		/*Register : PLL_STATUS @ 0XFF5E0040</p>

		IOPLL is locked
		PSU_CRL_APB_PLL_STATUS_IOPLL_LOCK                                               1
		(OFFSET, MASK, VALUE)      (0XFF5E0040, 0x00000001U ,0x00000001U)  */
		mask_poll(CRL_APB_PLL_STATUS_OFFSET,0x00000001U);

	/*############################################################################################################################ */

		// : REMOVE PLL BY PASS
		/*Register : IOPLL_CTRL @ 0XFF5E0020</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_IOPLL_CTRL_BYPASS                                                   0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFF5E0020, 0x00000008U ,0x00000000U)  
		RegMask = (CRL_APB_IOPLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_IOPLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : IOPLL_TO_FPD_CTRL @ 0XFF5E0044</p>

		Divisor value for this clock.
		PSU_CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0                                          0x3

		Control for a clock that will be generated in the LPD, but used in the FPD as a clock source for the peripheral clock muxes.
		(OFFSET, MASK, VALUE)      (0XFF5E0044, 0x00003F00U ,0x00000300U)  
		RegMask = (CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_MASK |  0 );

		RegVal = ((0x00000003U << CRL_APB_IOPLL_TO_FPD_CTRL_DIVISOR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOPLL_TO_FPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
	/*############################################################################################################################ */

		// : IOPLL FRAC CFG
		/*Register : IOPLL_FRAC_CFG @ 0XFF5E0028</p>

		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
		 mode and uses DATA of this register for the fractional portion of the feedback divider.
		PSU_CRL_APB_IOPLL_FRAC_CFG_ENABLED                                              0x0

		Fractional value for the Feedback value.
		PSU_CRL_APB_IOPLL_FRAC_CFG_DATA                                                 0x0

		Fractional control for the PLL
		(OFFSET, MASK, VALUE)      (0XFF5E0028, 0x8000FFFFU ,0x00000000U)  
		RegMask = (CRL_APB_IOPLL_FRAC_CFG_ENABLED_MASK | CRL_APB_IOPLL_FRAC_CFG_DATA_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_IOPLL_FRAC_CFG_ENABLED_SHIFT
			| 0x00000000U << CRL_APB_IOPLL_FRAC_CFG_DATA_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		// : APU_PLL INIT
		/*Register : APLL_CFG @ 0XFD1A0024</p>

		PLL loop filter resistor control
		PSU_CRF_APB_APLL_CFG_RES                                                        0x2

		PLL charge pump control
		PSU_CRF_APB_APLL_CFG_CP                                                         0x3

		PLL loop filter high frequency capacitor control
		PSU_CRF_APB_APLL_CFG_LFHF                                                       0x3

		Lock circuit counter setting
		PSU_CRF_APB_APLL_CFG_LOCK_CNT                                                   0x258

		Lock circuit configuration settings for lock windowsize
		PSU_CRF_APB_APLL_CFG_LOCK_DLY                                                   0x3f

		Helper data. Values are to be looked up in a table from Data Sheet
		(OFFSET, MASK, VALUE)      (0XFD1A0024, 0xFE7FEDEFU ,0x7E4B0C62U)  
		RegMask = (CRF_APB_APLL_CFG_RES_MASK | CRF_APB_APLL_CFG_CP_MASK | CRF_APB_APLL_CFG_LFHF_MASK | CRF_APB_APLL_CFG_LOCK_CNT_MASK | CRF_APB_APLL_CFG_LOCK_DLY_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_APLL_CFG_RES_SHIFT
			| 0x00000003U << CRF_APB_APLL_CFG_CP_SHIFT
			| 0x00000003U << CRF_APB_APLL_CFG_LFHF_SHIFT
			| 0x00000258U << CRF_APB_APLL_CFG_LOCK_CNT_SHIFT
			| 0x0000003FU << CRF_APB_APLL_CFG_LOCK_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_APLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
	/*############################################################################################################################ */

		// : UPDATE FB_DIV
		/*Register : APLL_CTRL @ 0XFD1A0020</p>

		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
		PSU_CRF_APB_APLL_CTRL_PRE_SRC                                                   0x0

		The integer portion of the feedback divider to the PLL
		PSU_CRF_APB_APLL_CTRL_FBDIV                                                     0x42

		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
		PSU_CRF_APB_APLL_CTRL_DIV2                                                      0x1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00717F00U ,0x00014200U)  
		RegMask = (CRF_APB_APLL_CTRL_PRE_SRC_MASK | CRF_APB_APLL_CTRL_FBDIV_MASK | CRF_APB_APLL_CTRL_DIV2_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_PRE_SRC_SHIFT
			| 0x00000042U << CRF_APB_APLL_CTRL_FBDIV_SHIFT
			| 0x00000001U << CRF_APB_APLL_CTRL_DIV2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00717F00U ,0x00014200U);
	/*############################################################################################################################ */

		// : BY PASS PLL
		/*Register : APLL_CTRL @ 0XFD1A0020</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_APLL_CTRL_BYPASS                                                    1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000008U ,0x00000008U)  
		RegMask = (CRF_APB_APLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_APLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
	/*############################################################################################################################ */

		// : ASSERT RESET
		/*Register : APLL_CTRL @ 0XFD1A0020</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRF_APB_APLL_CTRL_RESET                                                     1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000001U ,0x00000001U)  
		RegMask = (CRF_APB_APLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_APLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		// : DEASSERT RESET
		/*Register : APLL_CTRL @ 0XFD1A0020</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRF_APB_APLL_CTRL_RESET                                                     0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000001U ,0x00000000U)  
		RegMask = (CRF_APB_APLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		// : CHECK PLL STATUS
		/*Register : PLL_STATUS @ 0XFD1A0044</p>

		APLL is locked
		PSU_CRF_APB_PLL_STATUS_APLL_LOCK                                                1
		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000001U ,0x00000001U)  */
		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000001U);

	/*############################################################################################################################ */

		// : REMOVE PLL BY PASS
		/*Register : APLL_CTRL @ 0XFD1A0020</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_APLL_CTRL_BYPASS                                                    0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0020, 0x00000008U ,0x00000000U)  
		RegMask = (CRF_APB_APLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_APLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_APLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : APLL_TO_LPD_CTRL @ 0XFD1A0048</p>

		Divisor value for this clock.
		PSU_CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0                                           0x3

		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
		(OFFSET, MASK, VALUE)      (0XFD1A0048, 0x00003F00U ,0x00000300U)  
		RegMask = (CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );

		RegVal = ((0x00000003U << CRF_APB_APLL_TO_LPD_CTRL_DIVISOR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_APLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
	/*############################################################################################################################ */

		// : APLL FRAC CFG
		/*Register : APLL_FRAC_CFG @ 0XFD1A0028</p>

		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
		 mode and uses DATA of this register for the fractional portion of the feedback divider.
		PSU_CRF_APB_APLL_FRAC_CFG_ENABLED                                               0x0

		Fractional value for the Feedback value.
		PSU_CRF_APB_APLL_FRAC_CFG_DATA                                                  0x0

		Fractional control for the PLL
		(OFFSET, MASK, VALUE)      (0XFD1A0028, 0x8000FFFFU ,0x00000000U)  
		RegMask = (CRF_APB_APLL_FRAC_CFG_ENABLED_MASK | CRF_APB_APLL_FRAC_CFG_DATA_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_APLL_FRAC_CFG_ENABLED_SHIFT
			| 0x00000000U << CRF_APB_APLL_FRAC_CFG_DATA_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_APLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		// : DDR_PLL INIT
		/*Register : DPLL_CFG @ 0XFD1A0030</p>

		PLL loop filter resistor control
		PSU_CRF_APB_DPLL_CFG_RES                                                        0x2

		PLL charge pump control
		PSU_CRF_APB_DPLL_CFG_CP                                                         0x3

		PLL loop filter high frequency capacitor control
		PSU_CRF_APB_DPLL_CFG_LFHF                                                       0x3

		Lock circuit counter setting
		PSU_CRF_APB_DPLL_CFG_LOCK_CNT                                                   0x258

		Lock circuit configuration settings for lock windowsize
		PSU_CRF_APB_DPLL_CFG_LOCK_DLY                                                   0x3f

		Helper data. Values are to be looked up in a table from Data Sheet
		(OFFSET, MASK, VALUE)      (0XFD1A0030, 0xFE7FEDEFU ,0x7E4B0C62U)  
		RegMask = (CRF_APB_DPLL_CFG_RES_MASK | CRF_APB_DPLL_CFG_CP_MASK | CRF_APB_DPLL_CFG_LFHF_MASK | CRF_APB_DPLL_CFG_LOCK_CNT_MASK | CRF_APB_DPLL_CFG_LOCK_DLY_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_DPLL_CFG_RES_SHIFT
			| 0x00000003U << CRF_APB_DPLL_CFG_CP_SHIFT
			| 0x00000003U << CRF_APB_DPLL_CFG_LFHF_SHIFT
			| 0x00000258U << CRF_APB_DPLL_CFG_LOCK_CNT_SHIFT
			| 0x0000003FU << CRF_APB_DPLL_CFG_LOCK_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E4B0C62U);
	/*############################################################################################################################ */

		// : UPDATE FB_DIV
		/*Register : DPLL_CTRL @ 0XFD1A002C</p>

		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
		PSU_CRF_APB_DPLL_CTRL_PRE_SRC                                                   0x0

		The integer portion of the feedback divider to the PLL
		PSU_CRF_APB_DPLL_CTRL_FBDIV                                                     0x40

		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
		PSU_CRF_APB_DPLL_CTRL_DIV2                                                      0x1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00717F00U ,0x00014000U)  
		RegMask = (CRF_APB_DPLL_CTRL_PRE_SRC_MASK | CRF_APB_DPLL_CTRL_FBDIV_MASK | CRF_APB_DPLL_CTRL_DIV2_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_PRE_SRC_SHIFT
			| 0x00000040U << CRF_APB_DPLL_CTRL_FBDIV_SHIFT
			| 0x00000001U << CRF_APB_DPLL_CTRL_DIV2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00717F00U ,0x00014000U);
	/*############################################################################################################################ */

		// : BY PASS PLL
		/*Register : DPLL_CTRL @ 0XFD1A002C</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DPLL_CTRL_BYPASS                                                    1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000008U ,0x00000008U)  
		RegMask = (CRF_APB_DPLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_DPLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
	/*############################################################################################################################ */

		// : ASSERT RESET
		/*Register : DPLL_CTRL @ 0XFD1A002C</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRF_APB_DPLL_CTRL_RESET                                                     1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000001U ,0x00000001U)  
		RegMask = (CRF_APB_DPLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_DPLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		// : DEASSERT RESET
		/*Register : DPLL_CTRL @ 0XFD1A002C</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRF_APB_DPLL_CTRL_RESET                                                     0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000001U ,0x00000000U)  
		RegMask = (CRF_APB_DPLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		// : CHECK PLL STATUS
		/*Register : PLL_STATUS @ 0XFD1A0044</p>

		DPLL is locked
		PSU_CRF_APB_PLL_STATUS_DPLL_LOCK                                                1
		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000002U ,0x00000002U)  */
		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000002U);

	/*############################################################################################################################ */

		// : REMOVE PLL BY PASS
		/*Register : DPLL_CTRL @ 0XFD1A002C</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DPLL_CTRL_BYPASS                                                    0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A002C, 0x00000008U ,0x00000000U)  
		RegMask = (CRF_APB_DPLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_DPLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DPLL_TO_LPD_CTRL @ 0XFD1A004C</p>

		Divisor value for this clock.
		PSU_CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0                                           0x3

		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
		(OFFSET, MASK, VALUE)      (0XFD1A004C, 0x00003F00U ,0x00000300U)  
		RegMask = (CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );

		RegVal = ((0x00000003U << CRF_APB_DPLL_TO_LPD_CTRL_DIVISOR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
	/*############################################################################################################################ */

		// : DPLL FRAC CFG
		/*Register : DPLL_FRAC_CFG @ 0XFD1A0034</p>

		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
		 mode and uses DATA of this register for the fractional portion of the feedback divider.
		PSU_CRF_APB_DPLL_FRAC_CFG_ENABLED                                               0x0

		Fractional value for the Feedback value.
		PSU_CRF_APB_DPLL_FRAC_CFG_DATA                                                  0x0

		Fractional control for the PLL
		(OFFSET, MASK, VALUE)      (0XFD1A0034, 0x8000FFFFU ,0x00000000U)  
		RegMask = (CRF_APB_DPLL_FRAC_CFG_ENABLED_MASK | CRF_APB_DPLL_FRAC_CFG_DATA_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_DPLL_FRAC_CFG_ENABLED_SHIFT
			| 0x00000000U << CRF_APB_DPLL_FRAC_CFG_DATA_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		// : VIDEO_PLL INIT
		/*Register : VPLL_CFG @ 0XFD1A003C</p>

		PLL loop filter resistor control
		PSU_CRF_APB_VPLL_CFG_RES                                                        0x2

		PLL charge pump control
		PSU_CRF_APB_VPLL_CFG_CP                                                         0x3

		PLL loop filter high frequency capacitor control
		PSU_CRF_APB_VPLL_CFG_LFHF                                                       0x3

		Lock circuit counter setting
		PSU_CRF_APB_VPLL_CFG_LOCK_CNT                                                   0x28a

		Lock circuit configuration settings for lock windowsize
		PSU_CRF_APB_VPLL_CFG_LOCK_DLY                                                   0x3f

		Helper data. Values are to be looked up in a table from Data Sheet
		(OFFSET, MASK, VALUE)      (0XFD1A003C, 0xFE7FEDEFU ,0x7E514C62U)  
		RegMask = (CRF_APB_VPLL_CFG_RES_MASK | CRF_APB_VPLL_CFG_CP_MASK | CRF_APB_VPLL_CFG_LFHF_MASK | CRF_APB_VPLL_CFG_LOCK_CNT_MASK | CRF_APB_VPLL_CFG_LOCK_DLY_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_VPLL_CFG_RES_SHIFT
			| 0x00000003U << CRF_APB_VPLL_CFG_CP_SHIFT
			| 0x00000003U << CRF_APB_VPLL_CFG_LFHF_SHIFT
			| 0x0000028AU << CRF_APB_VPLL_CFG_LOCK_CNT_SHIFT
			| 0x0000003FU << CRF_APB_VPLL_CFG_LOCK_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_VPLL_CFG_OFFSET ,0xFE7FEDEFU ,0x7E514C62U);
	/*############################################################################################################################ */

		// : UPDATE FB_DIV
		/*Register : VPLL_CTRL @ 0XFD1A0038</p>

		Mux select for determining which clock feeds this PLL. 0XX pss_ref_clk is the source 100 video clk is the source 101 pss_alt_
		ef_clk is the source 110 aux_refclk[X] is the source 111 gt_crx_ref_clk is the source
		PSU_CRF_APB_VPLL_CTRL_PRE_SRC                                                   0x0

		The integer portion of the feedback divider to the PLL
		PSU_CRF_APB_VPLL_CTRL_FBDIV                                                     0x39

		This turns on the divide by 2 that is inside of the PLL. This does not change the VCO frequency, just the output frequency
		PSU_CRF_APB_VPLL_CTRL_DIV2                                                      0x1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00717F00U ,0x00013900U)  
		RegMask = (CRF_APB_VPLL_CTRL_PRE_SRC_MASK | CRF_APB_VPLL_CTRL_FBDIV_MASK | CRF_APB_VPLL_CTRL_DIV2_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_PRE_SRC_SHIFT
			| 0x00000039U << CRF_APB_VPLL_CTRL_FBDIV_SHIFT
			| 0x00000001U << CRF_APB_VPLL_CTRL_DIV2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00717F00U ,0x00013900U);
	/*############################################################################################################################ */

		// : BY PASS PLL
		/*Register : VPLL_CTRL @ 0XFD1A0038</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_VPLL_CTRL_BYPASS                                                    1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000008U ,0x00000008U)  
		RegMask = (CRF_APB_VPLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_VPLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000008U ,0x00000008U);
	/*############################################################################################################################ */

		// : ASSERT RESET
		/*Register : VPLL_CTRL @ 0XFD1A0038</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRF_APB_VPLL_CTRL_RESET                                                     1

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000001U ,0x00000001U)  
		RegMask = (CRF_APB_VPLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_VPLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		// : DEASSERT RESET
		/*Register : VPLL_CTRL @ 0XFD1A0038</p>

		Asserts Reset to the PLL. When asserting reset, the PLL must already be in BYPASS.
		PSU_CRF_APB_VPLL_CTRL_RESET                                                     0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000001U ,0x00000000U)  
		RegMask = (CRF_APB_VPLL_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		// : CHECK PLL STATUS
		/*Register : PLL_STATUS @ 0XFD1A0044</p>

		VPLL is locked
		PSU_CRF_APB_PLL_STATUS_VPLL_LOCK                                                1
		(OFFSET, MASK, VALUE)      (0XFD1A0044, 0x00000004U ,0x00000004U)  */
		mask_poll(CRF_APB_PLL_STATUS_OFFSET,0x00000004U);

	/*############################################################################################################################ */

		// : REMOVE PLL BY PASS
		/*Register : VPLL_CTRL @ 0XFD1A0038</p>

		Bypasses the PLL clock. The usable clock will be determined from the POST_SRC field. (This signal may only be toggled after 4
		cycles of the old clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_VPLL_CTRL_BYPASS                                                    0

		PLL Basic Control
		(OFFSET, MASK, VALUE)      (0XFD1A0038, 0x00000008U ,0x00000000U)  
		RegMask = (CRF_APB_VPLL_CTRL_BYPASS_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_VPLL_CTRL_BYPASS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_VPLL_CTRL_OFFSET ,0x00000008U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : VPLL_TO_LPD_CTRL @ 0XFD1A0050</p>

		Divisor value for this clock.
		PSU_CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0                                           0x3

		Control for a clock that will be generated in the FPD, but used in the LPD as a clock source for the peripheral clock muxes.
		(OFFSET, MASK, VALUE)      (0XFD1A0050, 0x00003F00U ,0x00000300U)  
		RegMask = (CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_MASK |  0 );

		RegVal = ((0x00000003U << CRF_APB_VPLL_TO_LPD_CTRL_DIVISOR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_VPLL_TO_LPD_CTRL_OFFSET ,0x00003F00U ,0x00000300U);
	/*############################################################################################################################ */

		// : VIDEO FRAC CFG
		/*Register : VPLL_FRAC_CFG @ 0XFD1A0040</p>

		Fractional SDM bypass control. When 0, PLL is in integer mode and it ignores all fractional data. When 1, PLL is in fractiona
		 mode and uses DATA of this register for the fractional portion of the feedback divider.
		PSU_CRF_APB_VPLL_FRAC_CFG_ENABLED                                               0x1

		Fractional value for the Feedback value.
		PSU_CRF_APB_VPLL_FRAC_CFG_DATA                                                  0x820c

		Fractional control for the PLL
		(OFFSET, MASK, VALUE)      (0XFD1A0040, 0x8000FFFFU ,0x8000820CU)  
		RegMask = (CRF_APB_VPLL_FRAC_CFG_ENABLED_MASK | CRF_APB_VPLL_FRAC_CFG_DATA_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_VPLL_FRAC_CFG_ENABLED_SHIFT
			| 0x0000820CU << CRF_APB_VPLL_FRAC_CFG_DATA_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_VPLL_FRAC_CFG_OFFSET ,0x8000FFFFU ,0x8000820CU);
	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_clock_init_data() {
		// : CLOCK CONTROL SLCR REGISTER
		/*Register : GEM3_REF_CTRL @ 0XFF5E005C</p>

		Clock active for the RX channel
		PSU_CRL_APB_GEM3_REF_CTRL_RX_CLKACT                                             0x1

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_GEM3_REF_CTRL_CLKACT                                                0x1

		6 bit divider
		PSU_CRL_APB_GEM3_REF_CTRL_DIVISOR1                                              0x1

		6 bit divider
		PSU_CRL_APB_GEM3_REF_CTRL_DIVISOR0                                              0xc

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_GEM3_REF_CTRL_SRCSEL                                                0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E005C, 0x063F3F07U ,0x06010C00U)  
		RegMask = (CRL_APB_GEM3_REF_CTRL_RX_CLKACT_MASK | CRL_APB_GEM3_REF_CTRL_CLKACT_MASK | CRL_APB_GEM3_REF_CTRL_DIVISOR1_MASK | CRL_APB_GEM3_REF_CTRL_DIVISOR0_MASK | CRL_APB_GEM3_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_GEM3_REF_CTRL_RX_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_GEM3_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_GEM3_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000CU << CRL_APB_GEM3_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_GEM3_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_GEM3_REF_CTRL_OFFSET ,0x063F3F07U ,0x06010C00U);
	/*############################################################################################################################ */

		/*Register : USB0_BUS_REF_CTRL @ 0XFF5E0060</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_USB0_BUS_REF_CTRL_CLKACT                                            0x1

		6 bit divider
		PSU_CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1                                          0x1

		6 bit divider
		PSU_CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0                                          0x6

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_USB0_BUS_REF_CTRL_SRCSEL                                            0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0060, 0x023F3F07U ,0x02010600U)  
		RegMask = (CRL_APB_USB0_BUS_REF_CTRL_CLKACT_MASK | CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_USB0_BUS_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_USB0_BUS_REF_CTRL_DIVISOR1_SHIFT
			| 0x00000006U << CRL_APB_USB0_BUS_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_USB0_BUS_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_USB0_BUS_REF_CTRL_OFFSET ,0x023F3F07U ,0x02010600U);
	/*############################################################################################################################ */

		/*Register : USB3_DUAL_REF_CTRL @ 0XFF5E004C</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_USB3_DUAL_REF_CTRL_CLKACT                                           0x1

		6 bit divider
		PSU_CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1                                         0xf

		6 bit divider
		PSU_CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0                                         0x5

		000 = IOPLL; 010 = RPLL; 011 = DPLL. (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL                                           0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E004C, 0x023F3F07U ,0x020F0500U)  
		RegMask = (CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_MASK | CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_MASK | CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_MASK | CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_USB3_DUAL_REF_CTRL_CLKACT_SHIFT
			| 0x0000000FU << CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR1_SHIFT
			| 0x00000005U << CRL_APB_USB3_DUAL_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_USB3_DUAL_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_USB3_DUAL_REF_CTRL_OFFSET ,0x023F3F07U ,0x020F0500U);
	/*############################################################################################################################ */

		/*Register : QSPI_REF_CTRL @ 0XFF5E0068</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_QSPI_REF_CTRL_CLKACT                                                0x1

		6 bit divider
		PSU_CRL_APB_QSPI_REF_CTRL_DIVISOR1                                              0x1

		6 bit divider
		PSU_CRL_APB_QSPI_REF_CTRL_DIVISOR0                                              0xc

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_QSPI_REF_CTRL_SRCSEL                                                0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0068, 0x013F3F07U ,0x01010C00U)  
		RegMask = (CRL_APB_QSPI_REF_CTRL_CLKACT_MASK | CRL_APB_QSPI_REF_CTRL_DIVISOR1_MASK | CRL_APB_QSPI_REF_CTRL_DIVISOR0_MASK | CRL_APB_QSPI_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_QSPI_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_QSPI_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000CU << CRL_APB_QSPI_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_QSPI_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_QSPI_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010C00U);
	/*############################################################################################################################ */

		/*Register : SDIO1_REF_CTRL @ 0XFF5E0070</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_SDIO1_REF_CTRL_CLKACT                                               0x1

		6 bit divider
		PSU_CRL_APB_SDIO1_REF_CTRL_DIVISOR1                                             0x1

		6 bit divider
		PSU_CRL_APB_SDIO1_REF_CTRL_DIVISOR0                                             0x6

		000 = IOPLL; 010 = RPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_SDIO1_REF_CTRL_SRCSEL                                               0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0070, 0x013F3F07U ,0x01010602U)  
		RegMask = (CRL_APB_SDIO1_REF_CTRL_CLKACT_MASK | CRL_APB_SDIO1_REF_CTRL_DIVISOR1_MASK | CRL_APB_SDIO1_REF_CTRL_DIVISOR0_MASK | CRL_APB_SDIO1_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_SDIO1_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_SDIO1_REF_CTRL_DIVISOR1_SHIFT
			| 0x00000006U << CRL_APB_SDIO1_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_SDIO1_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_SDIO1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010602U);
	/*############################################################################################################################ */

		/*Register : SDIO_CLK_CTRL @ 0XFF18030C</p>

		MIO pad selection for sdio1_rx_clk (feedback clock from the PAD) 0: MIO [51] 1: MIO [76]
		PSU_IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL                                     0

		SoC Debug Clock Control
		(OFFSET, MASK, VALUE)      (0XFF18030C, 0x00020000U ,0x00000000U)  
		RegMask = (IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_SDIO_CLK_CTRL_SDIO1_RX_SRC_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_SDIO_CLK_CTRL_OFFSET ,0x00020000U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : UART0_REF_CTRL @ 0XFF5E0074</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_UART0_REF_CTRL_CLKACT                                               0x1

		6 bit divider
		PSU_CRL_APB_UART0_REF_CTRL_DIVISOR1                                             0x1

		6 bit divider
		PSU_CRL_APB_UART0_REF_CTRL_DIVISOR0                                             0xf

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_UART0_REF_CTRL_SRCSEL                                               0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0074, 0x013F3F07U ,0x01010F00U)  
		RegMask = (CRL_APB_UART0_REF_CTRL_CLKACT_MASK | CRL_APB_UART0_REF_CTRL_DIVISOR1_MASK | CRL_APB_UART0_REF_CTRL_DIVISOR0_MASK | CRL_APB_UART0_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_UART0_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_UART0_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000FU << CRL_APB_UART0_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_UART0_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_UART0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
	/*############################################################################################################################ */

		/*Register : UART1_REF_CTRL @ 0XFF5E0078</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_UART1_REF_CTRL_CLKACT                                               0x1

		6 bit divider
		PSU_CRL_APB_UART1_REF_CTRL_DIVISOR1                                             0x1

		6 bit divider
		PSU_CRL_APB_UART1_REF_CTRL_DIVISOR0                                             0xf

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_UART1_REF_CTRL_SRCSEL                                               0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0078, 0x013F3F07U ,0x01010F00U)  
		RegMask = (CRL_APB_UART1_REF_CTRL_CLKACT_MASK | CRL_APB_UART1_REF_CTRL_DIVISOR1_MASK | CRL_APB_UART1_REF_CTRL_DIVISOR0_MASK | CRL_APB_UART1_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_UART1_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_UART1_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000FU << CRL_APB_UART1_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_UART1_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_UART1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
	/*############################################################################################################################ */

		/*Register : I2C0_REF_CTRL @ 0XFF5E0120</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_I2C0_REF_CTRL_CLKACT                                                0x1

		6 bit divider
		PSU_CRL_APB_I2C0_REF_CTRL_DIVISOR1                                              0x1

		6 bit divider
		PSU_CRL_APB_I2C0_REF_CTRL_DIVISOR0                                              0xf

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_I2C0_REF_CTRL_SRCSEL                                                0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0120, 0x013F3F07U ,0x01010F00U)  
		RegMask = (CRL_APB_I2C0_REF_CTRL_CLKACT_MASK | CRL_APB_I2C0_REF_CTRL_DIVISOR1_MASK | CRL_APB_I2C0_REF_CTRL_DIVISOR0_MASK | CRL_APB_I2C0_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_I2C0_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_I2C0_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000FU << CRL_APB_I2C0_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_I2C0_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_I2C0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
	/*############################################################################################################################ */

		/*Register : I2C1_REF_CTRL @ 0XFF5E0124</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_I2C1_REF_CTRL_CLKACT                                                0x1

		6 bit divider
		PSU_CRL_APB_I2C1_REF_CTRL_DIVISOR1                                              0x1

		6 bit divider
		PSU_CRL_APB_I2C1_REF_CTRL_DIVISOR0                                              0xf

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_I2C1_REF_CTRL_SRCSEL                                                0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0124, 0x013F3F07U ,0x01010F00U)  
		RegMask = (CRL_APB_I2C1_REF_CTRL_CLKACT_MASK | CRL_APB_I2C1_REF_CTRL_DIVISOR1_MASK | CRL_APB_I2C1_REF_CTRL_DIVISOR0_MASK | CRL_APB_I2C1_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_I2C1_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_I2C1_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000FU << CRL_APB_I2C1_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_I2C1_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_I2C1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
	/*############################################################################################################################ */

		/*Register : CAN1_REF_CTRL @ 0XFF5E0088</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_CAN1_REF_CTRL_CLKACT                                                0x1

		6 bit divider
		PSU_CRL_APB_CAN1_REF_CTRL_DIVISOR1                                              0x1

		6 bit divider
		PSU_CRL_APB_CAN1_REF_CTRL_DIVISOR0                                              0xf

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_CAN1_REF_CTRL_SRCSEL                                                0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0088, 0x013F3F07U ,0x01010F00U)  
		RegMask = (CRL_APB_CAN1_REF_CTRL_CLKACT_MASK | CRL_APB_CAN1_REF_CTRL_DIVISOR1_MASK | CRL_APB_CAN1_REF_CTRL_DIVISOR0_MASK | CRL_APB_CAN1_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_CAN1_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_CAN1_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000FU << CRL_APB_CAN1_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_CAN1_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_CAN1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
	/*############################################################################################################################ */

		/*Register : CPU_R5_CTRL @ 0XFF5E0090</p>

		Turing this off will shut down the OCM, some parts of the APM, and prevent transactions going from the FPD to the LPD and cou
		d lead to system hang
		PSU_CRL_APB_CPU_R5_CTRL_CLKACT                                                  0x1

		6 bit divider
		PSU_CRL_APB_CPU_R5_CTRL_DIVISOR0                                                0x3

		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_CPU_R5_CTRL_SRCSEL                                                  0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0090, 0x01003F07U ,0x01000302U)  
		RegMask = (CRL_APB_CPU_R5_CTRL_CLKACT_MASK | CRL_APB_CPU_R5_CTRL_DIVISOR0_MASK | CRL_APB_CPU_R5_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_CPU_R5_CTRL_CLKACT_SHIFT
			| 0x00000003U << CRL_APB_CPU_R5_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_CPU_R5_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_CPU_R5_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
	/*############################################################################################################################ */

		/*Register : IOU_SWITCH_CTRL @ 0XFF5E009C</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_IOU_SWITCH_CTRL_CLKACT                                              0x1

		6 bit divider
		PSU_CRL_APB_IOU_SWITCH_CTRL_DIVISOR0                                            0x6

		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_IOU_SWITCH_CTRL_SRCSEL                                              0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E009C, 0x01003F07U ,0x01000602U)  
		RegMask = (CRL_APB_IOU_SWITCH_CTRL_CLKACT_MASK | CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_MASK | CRL_APB_IOU_SWITCH_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_IOU_SWITCH_CTRL_CLKACT_SHIFT
			| 0x00000006U << CRL_APB_IOU_SWITCH_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_IOU_SWITCH_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_IOU_SWITCH_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
	/*############################################################################################################################ */

		/*Register : PCAP_CTRL @ 0XFF5E00A4</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_PCAP_CTRL_CLKACT                                                    0x1

		6 bit divider
		PSU_CRL_APB_PCAP_CTRL_DIVISOR0                                                  0x6

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_PCAP_CTRL_SRCSEL                                                    0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00A4, 0x01003F07U ,0x01000602U)  
		RegMask = (CRL_APB_PCAP_CTRL_CLKACT_MASK | CRL_APB_PCAP_CTRL_DIVISOR0_MASK | CRL_APB_PCAP_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_PCAP_CTRL_CLKACT_SHIFT
			| 0x00000006U << CRL_APB_PCAP_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_PCAP_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_PCAP_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
	/*############################################################################################################################ */

		/*Register : LPD_SWITCH_CTRL @ 0XFF5E00A8</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_LPD_SWITCH_CTRL_CLKACT                                              0x1

		6 bit divider
		PSU_CRL_APB_LPD_SWITCH_CTRL_DIVISOR0                                            0x3

		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_LPD_SWITCH_CTRL_SRCSEL                                              0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00A8, 0x01003F07U ,0x01000302U)  
		RegMask = (CRL_APB_LPD_SWITCH_CTRL_CLKACT_MASK | CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_MASK | CRL_APB_LPD_SWITCH_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_LPD_SWITCH_CTRL_CLKACT_SHIFT
			| 0x00000003U << CRL_APB_LPD_SWITCH_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_LPD_SWITCH_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_LPD_SWITCH_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
	/*############################################################################################################################ */

		/*Register : LPD_LSBUS_CTRL @ 0XFF5E00AC</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_LPD_LSBUS_CTRL_CLKACT                                               0x1

		6 bit divider
		PSU_CRL_APB_LPD_LSBUS_CTRL_DIVISOR0                                             0xf

		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_LPD_LSBUS_CTRL_SRCSEL                                               0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00AC, 0x01003F07U ,0x01000F02U)  
		RegMask = (CRL_APB_LPD_LSBUS_CTRL_CLKACT_MASK | CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_MASK | CRL_APB_LPD_LSBUS_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_LPD_LSBUS_CTRL_CLKACT_SHIFT
			| 0x0000000FU << CRL_APB_LPD_LSBUS_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_LPD_LSBUS_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_LPD_LSBUS_CTRL_OFFSET ,0x01003F07U ,0x01000F02U);
	/*############################################################################################################################ */

		/*Register : DBG_LPD_CTRL @ 0XFF5E00B0</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_DBG_LPD_CTRL_CLKACT                                                 0x1

		6 bit divider
		PSU_CRL_APB_DBG_LPD_CTRL_DIVISOR0                                               0x6

		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_DBG_LPD_CTRL_SRCSEL                                                 0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00B0, 0x01003F07U ,0x01000602U)  
		RegMask = (CRL_APB_DBG_LPD_CTRL_CLKACT_MASK | CRL_APB_DBG_LPD_CTRL_DIVISOR0_MASK | CRL_APB_DBG_LPD_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_DBG_LPD_CTRL_CLKACT_SHIFT
			| 0x00000006U << CRL_APB_DBG_LPD_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_DBG_LPD_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_DBG_LPD_CTRL_OFFSET ,0x01003F07U ,0x01000602U);
	/*############################################################################################################################ */

		/*Register : ADMA_REF_CTRL @ 0XFF5E00B8</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_ADMA_REF_CTRL_CLKACT                                                0x1

		6 bit divider
		PSU_CRL_APB_ADMA_REF_CTRL_DIVISOR0                                              0x3

		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_ADMA_REF_CTRL_SRCSEL                                                0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00B8, 0x01003F07U ,0x01000302U)  
		RegMask = (CRL_APB_ADMA_REF_CTRL_CLKACT_MASK | CRL_APB_ADMA_REF_CTRL_DIVISOR0_MASK | CRL_APB_ADMA_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_ADMA_REF_CTRL_CLKACT_SHIFT
			| 0x00000003U << CRL_APB_ADMA_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_ADMA_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_ADMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000302U);
	/*############################################################################################################################ */

		/*Register : PL0_REF_CTRL @ 0XFF5E00C0</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_PL0_REF_CTRL_CLKACT                                                 0x1

		6 bit divider
		PSU_CRL_APB_PL0_REF_CTRL_DIVISOR1                                               0x1

		6 bit divider
		PSU_CRL_APB_PL0_REF_CTRL_DIVISOR0                                               0xf

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_PL0_REF_CTRL_SRCSEL                                                 0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00C0, 0x013F3F07U ,0x01010F00U)  
		RegMask = (CRL_APB_PL0_REF_CTRL_CLKACT_MASK | CRL_APB_PL0_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL0_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL0_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_PL0_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_PL0_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000FU << CRL_APB_PL0_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_PL0_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_PL0_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010F00U);
	/*############################################################################################################################ */

		/*Register : PL1_REF_CTRL @ 0XFF5E00C4</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_PL1_REF_CTRL_CLKACT                                                 0x1

		6 bit divider
		PSU_CRL_APB_PL1_REF_CTRL_DIVISOR1                                               0x4

		6 bit divider
		PSU_CRL_APB_PL1_REF_CTRL_DIVISOR0                                               0xf

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_PL1_REF_CTRL_SRCSEL                                                 0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00C4, 0x013F3F07U ,0x01040F00U)  
		RegMask = (CRL_APB_PL1_REF_CTRL_CLKACT_MASK | CRL_APB_PL1_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL1_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL1_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_PL1_REF_CTRL_CLKACT_SHIFT
			| 0x00000004U << CRL_APB_PL1_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000000FU << CRL_APB_PL1_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_PL1_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_PL1_REF_CTRL_OFFSET ,0x013F3F07U ,0x01040F00U);
	/*############################################################################################################################ */

		/*Register : PL2_REF_CTRL @ 0XFF5E00C8</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_PL2_REF_CTRL_CLKACT                                                 0x1

		6 bit divider
		PSU_CRL_APB_PL2_REF_CTRL_DIVISOR1                                               0x1

		6 bit divider
		PSU_CRL_APB_PL2_REF_CTRL_DIVISOR0                                               0x4

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_PL2_REF_CTRL_SRCSEL                                                 0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00C8, 0x013F3F07U ,0x01010402U)  
		RegMask = (CRL_APB_PL2_REF_CTRL_CLKACT_MASK | CRL_APB_PL2_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL2_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL2_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_PL2_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_PL2_REF_CTRL_DIVISOR1_SHIFT
			| 0x00000004U << CRL_APB_PL2_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_PL2_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_PL2_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010402U);
	/*############################################################################################################################ */

		/*Register : PL3_REF_CTRL @ 0XFF5E00CC</p>

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_PL3_REF_CTRL_CLKACT                                                 0x1

		6 bit divider
		PSU_CRL_APB_PL3_REF_CTRL_DIVISOR1                                               0x1

		6 bit divider
		PSU_CRL_APB_PL3_REF_CTRL_DIVISOR0                                               0x3

		000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_PL3_REF_CTRL_SRCSEL                                                 0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E00CC, 0x013F3F07U ,0x01010302U)  
		RegMask = (CRL_APB_PL3_REF_CTRL_CLKACT_MASK | CRL_APB_PL3_REF_CTRL_DIVISOR1_MASK | CRL_APB_PL3_REF_CTRL_DIVISOR0_MASK | CRL_APB_PL3_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_PL3_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRL_APB_PL3_REF_CTRL_DIVISOR1_SHIFT
			| 0x00000003U << CRL_APB_PL3_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_PL3_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_PL3_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010302U);
	/*############################################################################################################################ */

		/*Register : AMS_REF_CTRL @ 0XFF5E0108</p>

		6 bit divider
		PSU_CRL_APB_AMS_REF_CTRL_DIVISOR1                                               0x1

		6 bit divider
		PSU_CRL_APB_AMS_REF_CTRL_DIVISOR0                                               0x1d

		000 = RPLL; 010 = IOPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new
		clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_AMS_REF_CTRL_SRCSEL                                                 0x2

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_AMS_REF_CTRL_CLKACT                                                 0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0108, 0x013F3F07U ,0x01011D02U)  
		RegMask = (CRL_APB_AMS_REF_CTRL_DIVISOR1_MASK | CRL_APB_AMS_REF_CTRL_DIVISOR0_MASK | CRL_APB_AMS_REF_CTRL_SRCSEL_MASK | CRL_APB_AMS_REF_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_AMS_REF_CTRL_DIVISOR1_SHIFT
			| 0x0000001DU << CRL_APB_AMS_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRL_APB_AMS_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRL_APB_AMS_REF_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_AMS_REF_CTRL_OFFSET ,0x013F3F07U ,0x01011D02U);
	/*############################################################################################################################ */

		/*Register : DLL_REF_CTRL @ 0XFF5E0104</p>

		000 = IOPLL; 001 = RPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This
		is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_DLL_REF_CTRL_SRCSEL                                                 0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0104, 0x00000007U ,0x00000000U)  
		RegMask = (CRL_APB_DLL_REF_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_DLL_REF_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_DLL_REF_CTRL_OFFSET ,0x00000007U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : TIMESTAMP_REF_CTRL @ 0XFF5E0128</p>

		6 bit divider
		PSU_CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0                                         0xf

		1XX = pss_ref_clk; 000 = IOPLL; 010 = RPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 
		 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL                                           0x0

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT                                           0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFF5E0128, 0x01003F07U ,0x01000F00U)  
		RegMask = (CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_MASK | CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_MASK | CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x0000000FU << CRL_APB_TIMESTAMP_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRL_APB_TIMESTAMP_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_TIMESTAMP_REF_CTRL_OFFSET ,0x01003F07U ,0x01000F00U);
	/*############################################################################################################################ */

		/*Register : SATA_REF_CTRL @ 0XFD1A00A0</p>

		000 = IOPLL_TO_FPD; 010 = APLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
		he new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_SATA_REF_CTRL_SRCSEL                                                0x0

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_SATA_REF_CTRL_CLKACT                                                0x1

		6 bit divider
		PSU_CRF_APB_SATA_REF_CTRL_DIVISOR0                                              0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A00A0, 0x01003F07U ,0x01000200U)  
		RegMask = (CRF_APB_SATA_REF_CTRL_SRCSEL_MASK | CRF_APB_SATA_REF_CTRL_CLKACT_MASK | CRF_APB_SATA_REF_CTRL_DIVISOR0_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_SATA_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_SATA_REF_CTRL_CLKACT_SHIFT
			| 0x00000002U << CRF_APB_SATA_REF_CTRL_DIVISOR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_SATA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
	/*############################################################################################################################ */

		/*Register : PCIE_REF_CTRL @ 0XFD1A00B4</p>

		000 = IOPLL_TO_FPD; 010 = RPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cyc
		es of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_PCIE_REF_CTRL_SRCSEL                                                0x0

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_PCIE_REF_CTRL_CLKACT                                                0x1

		6 bit divider
		PSU_CRF_APB_PCIE_REF_CTRL_DIVISOR0                                              0x2

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A00B4, 0x01003F07U ,0x01000200U)  
		RegMask = (CRF_APB_PCIE_REF_CTRL_SRCSEL_MASK | CRF_APB_PCIE_REF_CTRL_CLKACT_MASK | CRF_APB_PCIE_REF_CTRL_DIVISOR0_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_PCIE_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_PCIE_REF_CTRL_CLKACT_SHIFT
			| 0x00000002U << CRF_APB_PCIE_REF_CTRL_DIVISOR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_PCIE_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
	/*############################################################################################################################ */

		/*Register : DP_VIDEO_REF_CTRL @ 0XFD1A0070</p>

		6 bit divider
		PSU_CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1                                          0x1

		6 bit divider
		PSU_CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0                                          0x3

		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL                                            0x3

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_DP_VIDEO_REF_CTRL_CLKACT                                            0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A0070, 0x013F3F07U ,0x01010303U)  
		RegMask = (CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR1_SHIFT
			| 0x00000003U << CRF_APB_DP_VIDEO_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000003U << CRF_APB_DP_VIDEO_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_DP_VIDEO_REF_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DP_VIDEO_REF_CTRL_OFFSET ,0x013F3F07U ,0x01010303U);
	/*############################################################################################################################ */

		/*Register : DP_AUDIO_REF_CTRL @ 0XFD1A0074</p>

		6 bit divider
		PSU_CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1                                          0x1

		6 bit divider
		PSU_CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0                                          0x27

		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD - might be using extra mux; (This signal may only be toggled after 4 cycles of the 
		ld clock and 4 cycles of the new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL                                            0x0

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_DP_AUDIO_REF_CTRL_CLKACT                                            0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A0074, 0x013F3F07U ,0x01012700U)  
		RegMask = (CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR1_SHIFT
			| 0x00000027U << CRF_APB_DP_AUDIO_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_DP_AUDIO_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_DP_AUDIO_REF_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DP_AUDIO_REF_CTRL_OFFSET ,0x013F3F07U ,0x01012700U);
	/*############################################################################################################################ */

		/*Register : DP_STC_REF_CTRL @ 0XFD1A007C</p>

		6 bit divider
		PSU_CRF_APB_DP_STC_REF_CTRL_DIVISOR1                                            0x1

		6 bit divider
		PSU_CRF_APB_DP_STC_REF_CTRL_DIVISOR0                                            0x11

		000 = VPLL; 010 = DPLL; 011 = RPLL_TO_FPD; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of t
		e new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DP_STC_REF_CTRL_SRCSEL                                              0x3

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_DP_STC_REF_CTRL_CLKACT                                              0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A007C, 0x013F3F07U ,0x01011103U)  
		RegMask = (CRF_APB_DP_STC_REF_CTRL_DIVISOR1_MASK | CRF_APB_DP_STC_REF_CTRL_DIVISOR0_MASK | CRF_APB_DP_STC_REF_CTRL_SRCSEL_MASK | CRF_APB_DP_STC_REF_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_DP_STC_REF_CTRL_DIVISOR1_SHIFT
			| 0x00000011U << CRF_APB_DP_STC_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000003U << CRF_APB_DP_STC_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_DP_STC_REF_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DP_STC_REF_CTRL_OFFSET ,0x013F3F07U ,0x01011103U);
	/*############################################################################################################################ */

		/*Register : ACPU_CTRL @ 0XFD1A0060</p>

		6 bit divider
		PSU_CRF_APB_ACPU_CTRL_DIVISOR0                                                  0x1

		000 = APLL; 010 = DPLL; 011 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
		lock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_ACPU_CTRL_SRCSEL                                                    0x0

		Clock active signal. Switch to 0 to disable the clock. For the half speed APU Clock
		PSU_CRF_APB_ACPU_CTRL_CLKACT_HALF                                               0x1

		Clock active signal. Switch to 0 to disable the clock. For the full speed ACPUX Clock. This will shut off the high speed cloc
		 to the entire APU
		PSU_CRF_APB_ACPU_CTRL_CLKACT_FULL                                               0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A0060, 0x03003F07U ,0x03000100U)  
		RegMask = (CRF_APB_ACPU_CTRL_DIVISOR0_MASK | CRF_APB_ACPU_CTRL_SRCSEL_MASK | CRF_APB_ACPU_CTRL_CLKACT_HALF_MASK | CRF_APB_ACPU_CTRL_CLKACT_FULL_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_ACPU_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_ACPU_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_ACPU_CTRL_CLKACT_HALF_SHIFT
			| 0x00000001U << CRF_APB_ACPU_CTRL_CLKACT_FULL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_ACPU_CTRL_OFFSET ,0x03003F07U ,0x03000100U);
	/*############################################################################################################################ */

		/*Register : DBG_TRACE_CTRL @ 0XFD1A0064</p>

		6 bit divider
		PSU_CRF_APB_DBG_TRACE_CTRL_DIVISOR0                                             0x2

		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
		he new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DBG_TRACE_CTRL_SRCSEL                                               0x0

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_DBG_TRACE_CTRL_CLKACT                                               0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A0064, 0x01003F07U ,0x01000200U)  
		RegMask = (CRF_APB_DBG_TRACE_CTRL_DIVISOR0_MASK | CRF_APB_DBG_TRACE_CTRL_SRCSEL_MASK | CRF_APB_DBG_TRACE_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_DBG_TRACE_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_DBG_TRACE_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_DBG_TRACE_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DBG_TRACE_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
	/*############################################################################################################################ */

		/*Register : DBG_FPD_CTRL @ 0XFD1A0068</p>

		6 bit divider
		PSU_CRF_APB_DBG_FPD_CTRL_DIVISOR0                                               0x2

		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
		he new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DBG_FPD_CTRL_SRCSEL                                                 0x0

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_DBG_FPD_CTRL_CLKACT                                                 0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A0068, 0x01003F07U ,0x01000200U)  
		RegMask = (CRF_APB_DBG_FPD_CTRL_DIVISOR0_MASK | CRF_APB_DBG_FPD_CTRL_SRCSEL_MASK | CRF_APB_DBG_FPD_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_DBG_FPD_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_DBG_FPD_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_DBG_FPD_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DBG_FPD_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
	/*############################################################################################################################ */

		/*Register : DDR_CTRL @ 0XFD1A0080</p>

		6 bit divider
		PSU_CRF_APB_DDR_CTRL_DIVISOR0                                                   0x2

		000 = DPLL; 001 = VPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new clock. This 
		s not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DDR_CTRL_SRCSEL                                                     0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A0080, 0x00003F07U ,0x00000200U)  
		RegMask = (CRF_APB_DDR_CTRL_DIVISOR0_MASK | CRF_APB_DDR_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_DDR_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_DDR_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DDR_CTRL_OFFSET ,0x00003F07U ,0x00000200U);
	/*############################################################################################################################ */

		/*Register : GPU_REF_CTRL @ 0XFD1A0084</p>

		6 bit divider
		PSU_CRF_APB_GPU_REF_CTRL_DIVISOR0                                               0x1

		000 = IOPLL_TO_FPD; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
		he new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_GPU_REF_CTRL_SRCSEL                                                 0x0

		Clock active signal. Switch to 0 to disable the clock, which will stop clock for GPU (and both Pixel Processors).
		PSU_CRF_APB_GPU_REF_CTRL_CLKACT                                                 0x1

		Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor
		PSU_CRF_APB_GPU_REF_CTRL_PP0_CLKACT                                             0x1

		Clock active signal for Pixel Processor. Switch to 0 to disable the clock only to this Pixel Processor
		PSU_CRF_APB_GPU_REF_CTRL_PP1_CLKACT                                             0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A0084, 0x07003F07U ,0x07000100U)  
		RegMask = (CRF_APB_GPU_REF_CTRL_DIVISOR0_MASK | CRF_APB_GPU_REF_CTRL_SRCSEL_MASK | CRF_APB_GPU_REF_CTRL_CLKACT_MASK | CRF_APB_GPU_REF_CTRL_PP0_CLKACT_MASK | CRF_APB_GPU_REF_CTRL_PP1_CLKACT_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_GPU_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_GPU_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_GPU_REF_CTRL_CLKACT_SHIFT
			| 0x00000001U << CRF_APB_GPU_REF_CTRL_PP0_CLKACT_SHIFT
			| 0x00000001U << CRF_APB_GPU_REF_CTRL_PP1_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_GPU_REF_CTRL_OFFSET ,0x07003F07U ,0x07000100U);
	/*############################################################################################################################ */

		/*Register : GDMA_REF_CTRL @ 0XFD1A00B8</p>

		6 bit divider
		PSU_CRF_APB_GDMA_REF_CTRL_DIVISOR0                                              0x2

		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
		lock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_GDMA_REF_CTRL_SRCSEL                                                0x0

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_GDMA_REF_CTRL_CLKACT                                                0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A00B8, 0x01003F07U ,0x01000200U)  
		RegMask = (CRF_APB_GDMA_REF_CTRL_DIVISOR0_MASK | CRF_APB_GDMA_REF_CTRL_SRCSEL_MASK | CRF_APB_GDMA_REF_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_GDMA_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_GDMA_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_GDMA_REF_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_GDMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
	/*############################################################################################################################ */

		/*Register : DPDMA_REF_CTRL @ 0XFD1A00BC</p>

		6 bit divider
		PSU_CRF_APB_DPDMA_REF_CTRL_DIVISOR0                                             0x2

		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
		lock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DPDMA_REF_CTRL_SRCSEL                                               0x0

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_DPDMA_REF_CTRL_CLKACT                                               0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A00BC, 0x01003F07U ,0x01000200U)  
		RegMask = (CRF_APB_DPDMA_REF_CTRL_DIVISOR0_MASK | CRF_APB_DPDMA_REF_CTRL_SRCSEL_MASK | CRF_APB_DPDMA_REF_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_DPDMA_REF_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_DPDMA_REF_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_DPDMA_REF_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DPDMA_REF_CTRL_OFFSET ,0x01003F07U ,0x01000200U);
	/*############################################################################################################################ */

		/*Register : TOPSW_MAIN_CTRL @ 0XFD1A00C0</p>

		6 bit divider
		PSU_CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0                                            0x2

		000 = APLL; 010 = VPLL; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of the new 
		lock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_TOPSW_MAIN_CTRL_SRCSEL                                              0x2

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_TOPSW_MAIN_CTRL_CLKACT                                              0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A00C0, 0x01003F07U ,0x01000202U)  
		RegMask = (CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_MASK | CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_MASK | CRF_APB_TOPSW_MAIN_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_TOPSW_MAIN_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRF_APB_TOPSW_MAIN_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_TOPSW_MAIN_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_TOPSW_MAIN_CTRL_OFFSET ,0x01003F07U ,0x01000202U);
	/*############################################################################################################################ */

		/*Register : TOPSW_LSBUS_CTRL @ 0XFD1A00C4</p>

		6 bit divider
		PSU_CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0                                           0x5

		000 = APLL; 010 = IOPLL_TO_FPD; 011 = DPLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
		he new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL                                             0x2

		Clock active signal. Switch to 0 to disable the clock
		PSU_CRF_APB_TOPSW_LSBUS_CTRL_CLKACT                                             0x1

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A00C4, 0x01003F07U ,0x01000502U)  
		RegMask = (CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_MASK | CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_MASK | CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_MASK |  0 );

		RegVal = ((0x00000005U << CRF_APB_TOPSW_LSBUS_CTRL_DIVISOR0_SHIFT
			| 0x00000002U << CRF_APB_TOPSW_LSBUS_CTRL_SRCSEL_SHIFT
			| 0x00000001U << CRF_APB_TOPSW_LSBUS_CTRL_CLKACT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_TOPSW_LSBUS_CTRL_OFFSET ,0x01003F07U ,0x01000502U);
	/*############################################################################################################################ */

		/*Register : DBG_TSTMP_CTRL @ 0XFD1A00F8</p>

		6 bit divider
		PSU_CRF_APB_DBG_TSTMP_CTRL_DIVISOR0                                             0x2

		000 = IOPLL_TO_FPD; 010 = DPLL; 011 = APLL; (This signal may only be toggled after 4 cycles of the old clock and 4 cycles of 
		he new clock. This is not usually an issue, but designers must be aware.)
		PSU_CRF_APB_DBG_TSTMP_CTRL_SRCSEL                                               0x0

		This register controls this reference clock
		(OFFSET, MASK, VALUE)      (0XFD1A00F8, 0x00003F07U ,0x00000200U)  
		RegMask = (CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_MASK | CRF_APB_DBG_TSTMP_CTRL_SRCSEL_MASK |  0 );

		RegVal = ((0x00000002U << CRF_APB_DBG_TSTMP_CTRL_DIVISOR0_SHIFT
			| 0x00000000U << CRF_APB_DBG_TSTMP_CTRL_SRCSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_DBG_TSTMP_CTRL_OFFSET ,0x00003F07U ,0x00000200U);
	/*############################################################################################################################ */

		/*Register : IOU_TTC_APB_CLK @ 0XFF180380</p>

		00" = Select the APB switch clock for the APB interface of TTC0'01" = Select the PLL ref clock for the APB interface of TTC0'
		0" = Select the R5 clock for the APB interface of TTC0
		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL                                           0

		00" = Select the APB switch clock for the APB interface of TTC1'01" = Select the PLL ref clock for the APB interface of TTC1'
		0" = Select the R5 clock for the APB interface of TTC1
		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL                                           0

		00" = Select the APB switch clock for the APB interface of TTC2'01" = Select the PLL ref clock for the APB interface of TTC2'
		0" = Select the R5 clock for the APB interface of TTC2
		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL                                           0

		00" = Select the APB switch clock for the APB interface of TTC3'01" = Select the PLL ref clock for the APB interface of TTC3'
		0" = Select the R5 clock for the APB interface of TTC3
		PSU_IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL                                           0

		TTC APB clock select
		(OFFSET, MASK, VALUE)      (0XFF180380, 0x000000FFU ,0x00000000U)  
		RegMask = (IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_MASK | IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_IOU_TTC_APB_CLK_TTC3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_IOU_TTC_APB_CLK_OFFSET ,0x000000FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : WDT_CLK_SEL @ 0XFD610100</p>

		System watchdog timer clock source selection: 0: Internal APB clock 1: External (PL clock via EMIO or Pinout clock via MIO)
		PSU_FPD_SLCR_WDT_CLK_SEL_SELECT                                                 0

		SWDT clock source select
		(OFFSET, MASK, VALUE)      (0XFD610100, 0x00000001U ,0x00000000U)  
		RegMask = (FPD_SLCR_WDT_CLK_SEL_SELECT_MASK |  0 );

		RegVal = ((0x00000000U << FPD_SLCR_WDT_CLK_SEL_SELECT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (FPD_SLCR_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : WDT_CLK_SEL @ 0XFF180300</p>

		System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock from PL via EMIO, or from pinout 
		ia MIO
		PSU_IOU_SLCR_WDT_CLK_SEL_SELECT                                                 0

		SWDT clock source select
		(OFFSET, MASK, VALUE)      (0XFF180300, 0x00000001U ,0x00000000U)  
		RegMask = (IOU_SLCR_WDT_CLK_SEL_SELECT_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_WDT_CLK_SEL_SELECT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : CSUPMU_WDT_CLK_SEL @ 0XFF410050</p>

		System watchdog timer clock source selection: 0: internal clock APB clock 1: external clock pss_ref_clk
		PSU_LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT                                          0

		SWDT clock source select
		(OFFSET, MASK, VALUE)      (0XFF410050, 0x00000001U ,0x00000000U)  
		RegMask = (LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_MASK |  0 );

		RegVal = ((0x00000000U << LPD_SLCR_CSUPMU_WDT_CLK_SEL_SELECT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (LPD_SLCR_CSUPMU_WDT_CLK_SEL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_ddr_init_data() {
		// : DDR INITIALIZATION
		// : DDR CONTROLLER RESET
		/*Register : RST_DDR_SS @ 0XFD1A0108</p>

		DDR block level reset inside of the DDR Sub System
		PSU_CRF_APB_RST_DDR_SS_DDR_RESET                                                0X1

		DDR sub system block level reset
		(OFFSET, MASK, VALUE)      (0XFD1A0108, 0x00000008U ,0x00000008U)  
		RegMask = (CRF_APB_RST_DDR_SS_DDR_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_DDR_SS_OFFSET ,0x00000008U ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : MSTR @ 0XFD070000</p>

		Indicates the configuration of the device used in the system. - 00 - x4 device - 01 - x8 device - 10 - x16 device - 11 - x32 
		evice
		PSU_DDRC_MSTR_DEVICE_CONFIG                                                     0x1

		Choose which registers are used. - 0 - Original registers - 1 - Shadow registers
		PSU_DDRC_MSTR_FREQUENCY_MODE                                                    0x0

		Only present for multi-rank configurations. Each bit represents one rank. For two-rank configurations, only bits[25:24] are p
		esent. - 1 - populated - 0 - unpopulated LSB is the lowest rank number. For 2 ranks following combinations are legal: - 01 - 
		ne rank - 11 - Two ranks - Others - Reserved. For 4 ranks following combinations are legal: - 0001 - One rank - 0011 - Two ra
		ks - 1111 - Four ranks
		PSU_DDRC_MSTR_ACTIVE_RANKS                                                      0x1

		SDRAM burst length used: - 0001 - Burst length of 2 (only supported for mDDR) - 0010 - Burst length of 4 - 0100 - Burst lengt
		 of 8 - 1000 - Burst length of 16 (only supported for mDDR, LPDDR2, and LPDDR4) All other values are reserved. This controls 
		he burst size used to access the SDRAM. This must match the burst length mode register setting in the SDRAM. (For BC4/8 on-th
		-fly mode of DDR3 and DDR4, set this field to 0x0100) Burst length of 2 is not supported with AXI ports when MEMC_BURST_LENGT
		 is 8. Burst length of 2 is only supported with MEMC_FREQ_RATIO = 1
		PSU_DDRC_MSTR_BURST_RDWR                                                        0x4

		Set to 1 when the uMCTL2 and DRAM has to be put in DLL-off mode for low frequency operation. Set to 0 to put uMCTL2 and DRAM 
		n DLL-on mode for normal frequency operation. If DDR4 CRC/parity retry is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), d
		l_off_mode is not supported, and this bit must be set to '0'.
		PSU_DDRC_MSTR_DLL_OFF_MODE                                                      0x0

		Selects proportion of DQ bus width that is used by the SDRAM - 00 - Full DQ bus width to SDRAM - 01 - Half DQ bus width to SD
		AM - 10 - Quarter DQ bus width to SDRAM - 11 - Reserved. Note that half bus width mode is only supported when the SDRAM bus w
		dth is a multiple of 16, and quarter bus width mode is only supported when the SDRAM bus width is a multiple of 32 and the co
		figuration parameter MEMC_QBUS_SUPPORT is set. Bus width refers to DQ bus width (excluding any ECC width).
		PSU_DDRC_MSTR_DATA_BUS_WIDTH                                                    0x0

		1 indicates put the DRAM in geardown mode (2N) and 0 indicates put the DRAM in normal mode (1N). This register can be changed
		 only when the Controller is in self-refresh mode. This signal must be set the same value as MR3 bit A3. Note: Geardown mode 
		s not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set
		PSU_DDRC_MSTR_GEARDOWN_MODE                                                     0x0

		If 1, then uMCTL2 uses 2T timing. Otherwise, uses 1T timing. In 2T timing, all command signals (except chip select) are held 
		or 2 clocks on the SDRAM bus. Chip select is asserted on the second cycle of the command Note: 2T timing is not supported in 
		PDDR2/LPDDR3/LPDDR4 mode Note: 2T timing is not supported if the configuration parameter MEMC_CMD_RTN2IDLE is set Note: 2T ti
		ing is not supported in DDR4 geardown mode.
		PSU_DDRC_MSTR_EN_2T_TIMING_MODE                                                 0x0

		When set, enable burst-chop in DDR3/DDR4. Burst Chop for Reads is exercised only in HIF configurations (UMCTL2_INCL_ARB not s
		t) and if in full bus width mode (MSTR.data_bus_width = 00). Burst Chop for Writes is exercised only if Partial Writes enable
		 (UMCTL2_PARTIAL_WR=1) and if CRC is disabled (CRCPARCTL1.crc_enable = 0). If DDR4 CRC/parity retry is enabled (CRCPARCTL1.cr
		_parity_retry_enable = 1), burst chop is not supported, and this bit must be set to '0'
		PSU_DDRC_MSTR_BURSTCHOP                                                         0x0

		Select LPDDR4 SDRAM - 1 - LPDDR4 SDRAM device in use. - 0 - non-LPDDR4 device in use Present only in designs configured to su
		port LPDDR4.
		PSU_DDRC_MSTR_LPDDR4                                                            0x0

		Select DDR4 SDRAM - 1 - DDR4 SDRAM device in use. - 0 - non-DDR4 device in use Present only in designs configured to support 
		DR4.
		PSU_DDRC_MSTR_DDR4                                                              0x1

		Select LPDDR3 SDRAM - 1 - LPDDR3 SDRAM device in use. - 0 - non-LPDDR3 device in use Present only in designs configured to su
		port LPDDR3.
		PSU_DDRC_MSTR_LPDDR3                                                            0x0

		Select LPDDR2 SDRAM - 1 - LPDDR2 SDRAM device in use. - 0 - non-LPDDR2 device in use Present only in designs configured to su
		port LPDDR2.
		PSU_DDRC_MSTR_LPDDR2                                                            0x0

		Select DDR3 SDRAM - 1 - DDR3 SDRAM device in use - 0 - non-DDR3 SDRAM device in use Only present in designs that support DDR3
		
		PSU_DDRC_MSTR_DDR3                                                              0x0

		Master Register
		(OFFSET, MASK, VALUE)      (0XFD070000, 0xE30FBE3DU ,0x41040010U)  
		RegMask = (DDRC_MSTR_DEVICE_CONFIG_MASK | DDRC_MSTR_FREQUENCY_MODE_MASK | DDRC_MSTR_ACTIVE_RANKS_MASK | DDRC_MSTR_BURST_RDWR_MASK | DDRC_MSTR_DLL_OFF_MODE_MASK | DDRC_MSTR_DATA_BUS_WIDTH_MASK | DDRC_MSTR_GEARDOWN_MODE_MASK | DDRC_MSTR_EN_2T_TIMING_MODE_MASK | DDRC_MSTR_BURSTCHOP_MASK | DDRC_MSTR_LPDDR4_MASK | DDRC_MSTR_DDR4_MASK | DDRC_MSTR_LPDDR3_MASK | DDRC_MSTR_LPDDR2_MASK | DDRC_MSTR_DDR3_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_MSTR_DEVICE_CONFIG_SHIFT
			| 0x00000000U << DDRC_MSTR_FREQUENCY_MODE_SHIFT
			| 0x00000001U << DDRC_MSTR_ACTIVE_RANKS_SHIFT
			| 0x00000004U << DDRC_MSTR_BURST_RDWR_SHIFT
			| 0x00000000U << DDRC_MSTR_DLL_OFF_MODE_SHIFT
			| 0x00000000U << DDRC_MSTR_DATA_BUS_WIDTH_SHIFT
			| 0x00000000U << DDRC_MSTR_GEARDOWN_MODE_SHIFT
			| 0x00000000U << DDRC_MSTR_EN_2T_TIMING_MODE_SHIFT
			| 0x00000000U << DDRC_MSTR_BURSTCHOP_SHIFT
			| 0x00000000U << DDRC_MSTR_LPDDR4_SHIFT
			| 0x00000001U << DDRC_MSTR_DDR4_SHIFT
			| 0x00000000U << DDRC_MSTR_LPDDR3_SHIFT
			| 0x00000000U << DDRC_MSTR_LPDDR2_SHIFT
			| 0x00000000U << DDRC_MSTR_DDR3_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_MSTR_OFFSET ,0xE30FBE3DU ,0x41040010U);
	/*############################################################################################################################ */

		/*Register : MRCTRL0 @ 0XFD070010</p>

		Setting this register bit to 1 triggers a mode register read or write operation. When the MR operation is complete, the uMCTL
		 automatically clears this bit. The other register fields of this register must be written in a separate APB transaction, bef
		re setting this mr_wr bit. It is recommended NOT to set this signal if in Init, Deep power-down or MPSM operating modes.
		PSU_DDRC_MRCTRL0_MR_WR                                                          0x0

		Address of the mode register that is to be written to. - 0000 - MR0 - 0001 - MR1 - 0010 - MR2 - 0011 - MR3 - 0100 - MR4 - 010
		 - MR5 - 0110 - MR6 - 0111 - MR7 Don't Care for LPDDR2/LPDDR3/LPDDR4 (see MRCTRL1.mr_data for mode register addressing in LPD
		R2/LPDDR3/LPDDR4) This signal is also used for writing to control words of RDIMMs. In that case, it corresponds to the bank a
		dress bits sent to the RDIMM In case of DDR4, the bit[3:2] corresponds to the bank group bits. Therefore, the bit[3] as well 
		s the bit[2:0] must be set to an appropriate value which is considered both the Address Mirroring of UDIMMs/RDIMMs and the Ou
		put Inversion of RDIMMs.
		PSU_DDRC_MRCTRL0_MR_ADDR                                                        0x0

		Controls which rank is accessed by MRCTRL0.mr_wr. Normally, it is desired to access all ranks, so all bits should be set to 1
		 However, for multi-rank UDIMMs/RDIMMs which implement address mirroring, it may be necessary to access ranks individually. E
		amples (assume uMCTL2 is configured for 4 ranks): - 0x1 - select rank 0 only - 0x2 - select rank 1 only - 0x5 - select ranks 
		 and 2 - 0xA - select ranks 1 and 3 - 0xF - select ranks 0, 1, 2 and 3
		PSU_DDRC_MRCTRL0_MR_RANK                                                        0x3

		Indicates whether Software intervention is allowed via MRCTRL0/MRCTRL1 before automatic SDRAM initialization routine or not. 
		or DDR4, this bit can be used to initialize the DDR4 RCD (MR7) before automatic SDRAM initialization. For LPDDR4, this bit ca
		 be used to program additional mode registers before automatic SDRAM initialization if necessary. Note: This must be cleared 
		o 0 after completing Software operation. Otherwise, SDRAM initialization routine will not re-start. - 0 - Software interventi
		n is not allowed - 1 - Software intervention is allowed
		PSU_DDRC_MRCTRL0_SW_INIT_INT                                                    0x0

		Indicates whether the mode register operation is MRS in PDA mode or not - 0 - MRS - 1 - MRS in Per DRAM Addressability mode
		PSU_DDRC_MRCTRL0_PDA_EN                                                         0x0

		Indicates whether the mode register operation is MRS or WR/RD for MPR (only supported for DDR4) - 0 - MRS - 1 - WR/RD for MPR
		PSU_DDRC_MRCTRL0_MPR_EN                                                         0x0

		Indicates whether the mode register operation is read or write. Only used for LPDDR2/LPDDR3/LPDDR4/DDR4. - 0 - Write - 1 - Re
		d
		PSU_DDRC_MRCTRL0_MR_TYPE                                                        0x0

		Mode Register Read/Write Control Register 0. Note: Do not enable more than one of the following fields simultaneously: - sw_i
		it_int - pda_en - mpr_en
		(OFFSET, MASK, VALUE)      (0XFD070010, 0x8000F03FU ,0x00000030U)  
		RegMask = (DDRC_MRCTRL0_MR_WR_MASK | DDRC_MRCTRL0_MR_ADDR_MASK | DDRC_MRCTRL0_MR_RANK_MASK | DDRC_MRCTRL0_SW_INIT_INT_MASK | DDRC_MRCTRL0_PDA_EN_MASK | DDRC_MRCTRL0_MPR_EN_MASK | DDRC_MRCTRL0_MR_TYPE_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_MRCTRL0_MR_WR_SHIFT
			| 0x00000000U << DDRC_MRCTRL0_MR_ADDR_SHIFT
			| 0x00000003U << DDRC_MRCTRL0_MR_RANK_SHIFT
			| 0x00000000U << DDRC_MRCTRL0_SW_INIT_INT_SHIFT
			| 0x00000000U << DDRC_MRCTRL0_PDA_EN_SHIFT
			| 0x00000000U << DDRC_MRCTRL0_MPR_EN_SHIFT
			| 0x00000000U << DDRC_MRCTRL0_MR_TYPE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_MRCTRL0_OFFSET ,0x8000F03FU ,0x00000030U);
	/*############################################################################################################################ */

		/*Register : DERATEEN @ 0XFD070020</p>

		Derate value of tRC for LPDDR4 - 0 - Derating uses +1. - 1 - Derating uses +2. - 2 - Derating uses +3. - 3 - Derating uses +4
		 Present only in designs configured to support LPDDR4. The required number of cycles for derating can be determined by dividi
		g 3.75ns by the core_ddrc_core_clk period, and rounding up the next integer.
		PSU_DDRC_DERATEEN_RC_DERATE_VALUE                                               0x3

		Derate byte Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 Indicates which byte of the MRR data is used f
		r derating. The maximum valid value depends on MEMC_DRAM_TOTAL_DATA_WIDTH.
		PSU_DDRC_DERATEEN_DERATE_BYTE                                                   0x0

		Derate value - 0 - Derating uses +1. - 1 - Derating uses +2. Present only in designs configured to support LPDDR2/LPDDR3/LPDD
		4 Set to 0 for all LPDDR2 speed grades as derating value of +1.875 ns is less than a core_ddrc_core_clk period. Can be 0 or 1
		for LPDDR3/LPDDR4, depending if +1.875 ns is less than a core_ddrc_core_clk period or not.
		PSU_DDRC_DERATEEN_DERATE_VALUE                                                  0x0

		Enables derating - 0 - Timing parameter derating is disabled - 1 - Timing parameter derating is enabled using MR4 read value.
		Present only in designs configured to support LPDDR2/LPDDR3/LPDDR4 This field must be set to '0' for non-LPDDR2/LPDDR3/LPDDR4
		mode.
		PSU_DDRC_DERATEEN_DERATE_ENABLE                                                 0x0

		Temperature Derate Enable Register
		(OFFSET, MASK, VALUE)      (0XFD070020, 0x000003F3U ,0x00000300U)  
		RegMask = (DDRC_DERATEEN_RC_DERATE_VALUE_MASK | DDRC_DERATEEN_DERATE_BYTE_MASK | DDRC_DERATEEN_DERATE_VALUE_MASK | DDRC_DERATEEN_DERATE_ENABLE_MASK |  0 );

		RegVal = ((0x00000003U << DDRC_DERATEEN_RC_DERATE_VALUE_SHIFT
			| 0x00000000U << DDRC_DERATEEN_DERATE_BYTE_SHIFT
			| 0x00000000U << DDRC_DERATEEN_DERATE_VALUE_SHIFT
			| 0x00000000U << DDRC_DERATEEN_DERATE_ENABLE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DERATEEN_OFFSET ,0x000003F3U ,0x00000300U);
	/*############################################################################################################################ */

		/*Register : DERATEINT @ 0XFD070024</p>

		Interval between two MR4 reads, used to derate the timing parameters. Present only in designs configured to support LPDDR2/LP
		DR3/LPDDR4. This register must not be set to zero
		PSU_DDRC_DERATEINT_MR4_READ_INTERVAL                                            0x800000

		Temperature Derate Interval Register
		(OFFSET, MASK, VALUE)      (0XFD070024, 0xFFFFFFFFU ,0x00800000U)  
		RegMask = (DDRC_DERATEINT_MR4_READ_INTERVAL_MASK |  0 );

		RegVal = ((0x00800000U << DDRC_DERATEINT_MR4_READ_INTERVAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DERATEINT_OFFSET ,0xFFFFFFFFU ,0x00800000U);
	/*############################################################################################################################ */

		/*Register : PWRCTL @ 0XFD070030</p>

		Self refresh state is an intermediate state to enter to Self refresh power down state or exit Self refresh power down state f
		r LPDDR4. This register controls transition from the Self refresh state. - 1 - Prohibit transition from Self refresh state - 
		 - Allow transition from Self refresh state
		PSU_DDRC_PWRCTL_STAY_IN_SELFREF                                                 0x0

		A value of 1 to this register causes system to move to Self Refresh state immediately, as long as it is not in INIT or DPD/MP
		M operating_mode. This is referred to as Software Entry/Exit to Self Refresh. - 1 - Software Entry to Self Refresh - 0 - Soft
		are Exit from Self Refresh
		PSU_DDRC_PWRCTL_SELFREF_SW                                                      0x0

		When this is 1, the uMCTL2 puts the SDRAM into maximum power saving mode when the transaction store is empty. This register m
		st be reset to '0' to bring uMCTL2 out of maximum power saving mode. Present only in designs configured to support DDR4. For 
		on-DDR4, this register should not be set to 1. Note that MPSM is not supported when using a DWC DDR PHY, if the PHY parameter
		DWC_AC_CS_USE is disabled, as the MPSM exit sequence requires the chip-select signal to toggle. FOR PERFORMANCE ONLY.
		PSU_DDRC_PWRCTL_MPSM_EN                                                         0x0

		Enable the assertion of dfi_dram_clk_disable whenever a clock is not required by the SDRAM. If set to 0, dfi_dram_clk_disable
		is never asserted. Assertion of dfi_dram_clk_disable is as follows: In DDR2/DDR3, can only be asserted in Self Refresh. In DD
		4, can be asserted in following: - in Self Refresh. - in Maximum Power Saving Mode In mDDR/LPDDR2/LPDDR3, can be asserted in 
		ollowing: - in Self Refresh - in Power Down - in Deep Power Down - during Normal operation (Clock Stop) In LPDDR4, can be ass
		rted in following: - in Self Refresh Power Down - in Power Down - during Normal operation (Clock Stop)
		PSU_DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE                                         0x0

		When this is 1, uMCTL2 puts the SDRAM into deep power-down mode when the transaction store is empty. This register must be re
		et to '0' to bring uMCTL2 out of deep power-down mode. Controller performs automatic SDRAM initialization on deep power-down 
		xit. Present only in designs configured to support mDDR or LPDDR2 or LPDDR3. For non-mDDR/non-LPDDR2/non-LPDDR3, this registe
		 should not be set to 1. FOR PERFORMANCE ONLY.
		PSU_DDRC_PWRCTL_DEEPPOWERDOWN_EN                                                0x0

		If true then the uMCTL2 goes into power-down after a programmable number of cycles 'maximum idle clocks before power down' (P
		RTMG.powerdown_to_x32). This register bit may be re-programmed during the course of normal operation.
		PSU_DDRC_PWRCTL_POWERDOWN_EN                                                    0x0

		If true then the uMCTL2 puts the SDRAM into Self Refresh after a programmable number of cycles 'maximum idle clocks before Se
		f Refresh (PWRTMG.selfref_to_x32)'. This register bit may be re-programmed during the course of normal operation.
		PSU_DDRC_PWRCTL_SELFREF_EN                                                      0x0

		Low Power Control Register
		(OFFSET, MASK, VALUE)      (0XFD070030, 0x0000007FU ,0x00000000U)  
		RegMask = (DDRC_PWRCTL_STAY_IN_SELFREF_MASK | DDRC_PWRCTL_SELFREF_SW_MASK | DDRC_PWRCTL_MPSM_EN_MASK | DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_MASK | DDRC_PWRCTL_DEEPPOWERDOWN_EN_MASK | DDRC_PWRCTL_POWERDOWN_EN_MASK | DDRC_PWRCTL_SELFREF_EN_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PWRCTL_STAY_IN_SELFREF_SHIFT
			| 0x00000000U << DDRC_PWRCTL_SELFREF_SW_SHIFT
			| 0x00000000U << DDRC_PWRCTL_MPSM_EN_SHIFT
			| 0x00000000U << DDRC_PWRCTL_EN_DFI_DRAM_CLK_DISABLE_SHIFT
			| 0x00000000U << DDRC_PWRCTL_DEEPPOWERDOWN_EN_SHIFT
			| 0x00000000U << DDRC_PWRCTL_POWERDOWN_EN_SHIFT
			| 0x00000000U << DDRC_PWRCTL_SELFREF_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PWRCTL_OFFSET ,0x0000007FU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : PWRTMG @ 0XFD070034</p>

		After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into Self Refresh. This must be enabled in 
		he PWRCTL.selfref_en. Unit: Multiples of 32 clocks. FOR PERFORMANCE ONLY.
		PSU_DDRC_PWRTMG_SELFREF_TO_X32                                                  0x40

		Minimum deep power-down time. For mDDR, value from the JEDEC specification is 0 as mDDR exits from deep power-down mode immed
		ately after PWRCTL.deeppowerdown_en is de-asserted. For LPDDR2/LPDDR3, value from the JEDEC specification is 500us. Unit: Mul
		iples of 4096 clocks. Present only in designs configured to support mDDR, LPDDR2 or LPDDR3. FOR PERFORMANCE ONLY.
		PSU_DDRC_PWRTMG_T_DPD_X4096                                                     0x84

		After this many clocks of NOP or deselect the uMCTL2 automatically puts the SDRAM into power-down. This must be enabled in th
		 PWRCTL.powerdown_en. Unit: Multiples of 32 clocks FOR PERFORMANCE ONLY.
		PSU_DDRC_PWRTMG_POWERDOWN_TO_X32                                                0x10

		Low Power Timing Register
		(OFFSET, MASK, VALUE)      (0XFD070034, 0x00FFFF1FU ,0x00408410U)  
		RegMask = (DDRC_PWRTMG_SELFREF_TO_X32_MASK | DDRC_PWRTMG_T_DPD_X4096_MASK | DDRC_PWRTMG_POWERDOWN_TO_X32_MASK |  0 );

		RegVal = ((0x00000040U << DDRC_PWRTMG_SELFREF_TO_X32_SHIFT
			| 0x00000084U << DDRC_PWRTMG_T_DPD_X4096_SHIFT
			| 0x00000010U << DDRC_PWRTMG_POWERDOWN_TO_X32_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PWRTMG_OFFSET ,0x00FFFF1FU ,0x00408410U);
	/*############################################################################################################################ */

		/*Register : RFSHCTL0 @ 0XFD070050</p>

		Threshold value in number of clock cycles before the critical refresh or page timer expires. A critical refresh is to be issu
		d before this threshold is reached. It is recommended that this not be changed from the default value, currently shown as 0x2
		 It must always be less than internally used t_rfc_nom_x32. Note that, in LPDDR2/LPDDR3/LPDDR4, internally used t_rfc_nom_x32
		may be equal to RFSHTMG.t_rfc_nom_x32>>2 if derating is enabled (DERATEEN.derate_enable=1). Otherwise, internally used t_rfc_
		om_x32 will be equal to RFSHTMG.t_rfc_nom_x32. Unit: Multiples of 32 clocks.
		PSU_DDRC_RFSHCTL0_REFRESH_MARGIN                                                0x2

		If the refresh timer (tRFCnom, also known as tREFI) has expired at least once, but it has not expired (RFSHCTL0.refresh_burst
		1) times yet, then a speculative refresh may be performed. A speculative refresh is a refresh performed at a time when refres
		 would be useful, but before it is absolutely required. When the SDRAM bus is idle for a period of time determined by this RF
		HCTL0.refresh_to_x32 and the refresh timer has expired at least once since the last refresh, then a speculative refresh is pe
		formed. Speculative refreshes continues successively until there are no refreshes pending or until new reads or writes are is
		ued to the uMCTL2. FOR PERFORMANCE ONLY.
		PSU_DDRC_RFSHCTL0_REFRESH_TO_X32                                                0x10

		The programmed value + 1 is the number of refresh timeouts that is allowed to accumulate before traffic is blocked and the re
		reshes are forced to execute. Closing pages to perform a refresh is a one-time penalty that must be paid for each group of re
		reshes. Therefore, performing refreshes in a burst reduces the per-refresh penalty of these page closings. Higher numbers for
		RFSHCTL.refresh_burst slightly increases utilization; lower numbers decreases the worst-case latency associated with refreshe
		. - 0 - single refresh - 1 - burst-of-2 refresh - 7 - burst-of-8 refresh For information on burst refresh feature refer to se
		tion 3.9 of DDR2 JEDEC specification - JESD79-2F.pdf. For DDR2/3, the refresh is always per-rank and not per-bank. The rank r
		fresh can be accumulated over 8*tREFI cycles using the burst refresh feature. In DDR4 mode, according to Fine Granularity fea
		ure, 8 refreshes can be postponed in 1X mode, 16 refreshes in 2X mode and 32 refreshes in 4X mode. If using PHY-initiated upd
		tes, care must be taken in the setting of RFSHCTL0.refresh_burst, to ensure that tRFCmax is not violated due to a PHY-initiat
		d update occurring shortly before a refresh burst was due. In this situation, the refresh burst will be delayed until the PHY
		initiated update is complete.
		PSU_DDRC_RFSHCTL0_REFRESH_BURST                                                 0x0

		- 1 - Per bank refresh; - 0 - All bank refresh. Per bank refresh allows traffic to flow to other banks. Per bank refresh is n
		t supported by all LPDDR2 devices but should be supported by all LPDDR3/LPDDR4 devices. Present only in designs configured to
		support LPDDR2/LPDDR3/LPDDR4
		PSU_DDRC_RFSHCTL0_PER_BANK_REFRESH                                              0x0

		Refresh Control Register 0
		(OFFSET, MASK, VALUE)      (0XFD070050, 0x00F1F1F4U ,0x00210000U)  
		RegMask = (DDRC_RFSHCTL0_REFRESH_MARGIN_MASK | DDRC_RFSHCTL0_REFRESH_TO_X32_MASK | DDRC_RFSHCTL0_REFRESH_BURST_MASK | DDRC_RFSHCTL0_PER_BANK_REFRESH_MASK |  0 );

		RegVal = ((0x00000002U << DDRC_RFSHCTL0_REFRESH_MARGIN_SHIFT
			| 0x00000010U << DDRC_RFSHCTL0_REFRESH_TO_X32_SHIFT
			| 0x00000000U << DDRC_RFSHCTL0_REFRESH_BURST_SHIFT
			| 0x00000000U << DDRC_RFSHCTL0_PER_BANK_REFRESH_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_RFSHCTL0_OFFSET ,0x00F1F1F4U ,0x00210000U);
	/*############################################################################################################################ */

		/*Register : RFSHCTL3 @ 0XFD070060</p>

		Fine Granularity Refresh Mode - 000 - Fixed 1x (Normal mode) - 001 - Fixed 2x - 010 - Fixed 4x - 101 - Enable on the fly 2x (
		ot supported) - 110 - Enable on the fly 4x (not supported) - Everything else - reserved Note: The on-the-fly modes is not sup
		orted in this version of the uMCTL2. Note: This must be set up while the Controller is in reset or while the Controller is in
		self-refresh mode. Changing this during normal operation is not allowed. Making this a dynamic register will be supported in 
		uture version of the uMCTL2.
		PSU_DDRC_RFSHCTL3_REFRESH_MODE                                                  0x0

		Toggle this signal (either from 0 to 1 or from 1 to 0) to indicate that the refresh register(s) have been updated. The value 
		s automatically updated when exiting reset, so it does not need to be toggled initially.
		PSU_DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL                                          0x0

		When '1', disable auto-refresh generated by the uMCTL2. When auto-refresh is disabled, the SoC core must generate refreshes u
		ing the registers reg_ddrc_rank0_refresh, reg_ddrc_rank1_refresh, reg_ddrc_rank2_refresh and reg_ddrc_rank3_refresh. When dis
		auto_refresh transitions from 0 to 1, any pending refreshes are immediately scheduled by the uMCTL2. If DDR4 CRC/parity retry
		is enabled (CRCPARCTL1.crc_parity_retry_enable = 1), disable auto-refresh is not supported, and this bit must be set to '0'. 
		his register field is changeable on the fly.
		PSU_DDRC_RFSHCTL3_DIS_AUTO_REFRESH                                              0x1

		Refresh Control Register 3
		(OFFSET, MASK, VALUE)      (0XFD070060, 0x00000073U ,0x00000001U)  
		RegMask = (DDRC_RFSHCTL3_REFRESH_MODE_MASK | DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_MASK | DDRC_RFSHCTL3_DIS_AUTO_REFRESH_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_RFSHCTL3_REFRESH_MODE_SHIFT
			| 0x00000000U << DDRC_RFSHCTL3_REFRESH_UPDATE_LEVEL_SHIFT
			| 0x00000001U << DDRC_RFSHCTL3_DIS_AUTO_REFRESH_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_RFSHCTL3_OFFSET ,0x00000073U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : RFSHTMG @ 0XFD070064</p>

		tREFI: Average time interval between refreshes per rank (Specification: 7.8us for DDR2, DDR3 and DDR4. See JEDEC specificatio
		 for mDDR, LPDDR2, LPDDR3 and LPDDR4). For LPDDR2/LPDDR3/LPDDR4: - if using all-bank refreshes (RFSHCTL0.per_bank_refresh = 0
		, this register should be set to tREFIab - if using per-bank refreshes (RFSHCTL0.per_bank_refresh = 1), this register should 
		e set to tREFIpb For configurations with MEMC_FREQ_RATIO=2, program this to (tREFI/2), no rounding up. In DDR4 mode, tREFI va
		ue is different depending on the refresh mode. The user should program the appropriate value from the spec based on the value
		programmed in the refresh mode register. Note that RFSHTMG.t_rfc_nom_x32 * 32 must be greater than RFSHTMG.t_rfc_min, and RFS
		TMG.t_rfc_nom_x32 must be greater than 0x1. Unit: Multiples of 32 clocks.
		PSU_DDRC_RFSHTMG_T_RFC_NOM_X32                                                  0x82

		Used only when LPDDR3 memory type is connected. Should only be changed when uMCTL2 is in reset. Specifies whether to use the 
		REFBW parameter (required by some LPDDR3 devices which comply with earlier versions of the LPDDR3 JEDEC specification) or not
		 - 0 - tREFBW parameter not used - 1 - tREFBW parameter used
		PSU_DDRC_RFSHTMG_LPDDR3_TREFBW_EN                                               0x1

		tRFC (min): Minimum time from refresh to refresh or activate. For MEMC_FREQ_RATIO=1 configurations, t_rfc_min should be set t
		 RoundUp(tRFCmin/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rfc_min should be set to RoundUp(RoundUp(tRFCmin/tCK)/2). In L
		DDR2/LPDDR3/LPDDR4 mode: - if using all-bank refreshes, the tRFCmin value in the above equations is equal to tRFCab - if usin
		 per-bank refreshes, the tRFCmin value in the above equations is equal to tRFCpb In DDR4 mode, the tRFCmin value in the above
		equations is different depending on the refresh mode (fixed 1X,2X,4X) and the device density. The user should program the app
		opriate value from the spec based on the 'refresh_mode' and the device density that is used. Unit: Clocks.
		PSU_DDRC_RFSHTMG_T_RFC_MIN                                                      0x8b

		Refresh Timing Register
		(OFFSET, MASK, VALUE)      (0XFD070064, 0x0FFF83FFU ,0x0082808BU)  
		RegMask = (DDRC_RFSHTMG_T_RFC_NOM_X32_MASK | DDRC_RFSHTMG_LPDDR3_TREFBW_EN_MASK | DDRC_RFSHTMG_T_RFC_MIN_MASK |  0 );

		RegVal = ((0x00000082U << DDRC_RFSHTMG_T_RFC_NOM_X32_SHIFT
			| 0x00000001U << DDRC_RFSHTMG_LPDDR3_TREFBW_EN_SHIFT
			| 0x0000008BU << DDRC_RFSHTMG_T_RFC_MIN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_RFSHTMG_OFFSET ,0x0FFF83FFU ,0x0082808BU);
	/*############################################################################################################################ */

		/*Register : ECCCFG0 @ 0XFD070070</p>

		Disable ECC scrubs. Valid only when ECCCFG0.ecc_mode = 3'b100 and MEMC_USE_RMW is defined
		PSU_DDRC_ECCCFG0_DIS_SCRUB                                                      0x1

		ECC mode indicator - 000 - ECC disabled - 100 - ECC enabled - SEC/DED over 1 beat - all other settings are reserved for futur
		 use
		PSU_DDRC_ECCCFG0_ECC_MODE                                                       0x0

		ECC Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD070070, 0x00000017U ,0x00000010U)  
		RegMask = (DDRC_ECCCFG0_DIS_SCRUB_MASK | DDRC_ECCCFG0_ECC_MODE_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_ECCCFG0_DIS_SCRUB_SHIFT
			| 0x00000000U << DDRC_ECCCFG0_ECC_MODE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ECCCFG0_OFFSET ,0x00000017U ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : ECCCFG1 @ 0XFD070074</p>

		Selects whether to poison 1 or 2 bits - if 0 -> 2-bit (uncorrectable) data poisoning, if 1 -> 1-bit (correctable) data poison
		ng, if ECCCFG1.data_poison_en=1
		PSU_DDRC_ECCCFG1_DATA_POISON_BIT                                                0x0

		Enable ECC data poisoning - introduces ECC errors on writes to address specified by the ECCPOISONADDR0/1 registers
		PSU_DDRC_ECCCFG1_DATA_POISON_EN                                                 0x0

		ECC Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD070074, 0x00000003U ,0x00000000U)  
		RegMask = (DDRC_ECCCFG1_DATA_POISON_BIT_MASK | DDRC_ECCCFG1_DATA_POISON_EN_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_ECCCFG1_DATA_POISON_BIT_SHIFT
			| 0x00000000U << DDRC_ECCCFG1_DATA_POISON_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ECCCFG1_OFFSET ,0x00000003U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : CRCPARCTL1 @ 0XFD0700C4</p>

		The maximum number of DFI PHY clock cycles allowed from the assertion of the dfi_rddata_en signal to the assertion of each of
		the corresponding bits of the dfi_rddata_valid signal. This corresponds to the DFI timing parameter tphy_rdlat. Refer to PHY 
		pecification for correct value. This value it only used for detecting read data timeout when DDR4 retry is enabled by CRCPARC
		L1.crc_parity_retry_enable=1. Maximum supported value: - 1:1 Frequency mode : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_
		dlat < 'd114 - 1:2 Frequency mode ANDAND DFITMG0.dfi_rddata_use_sdr == 1 : CRCPARCTL1.dfi_t_phy_rdlat < 64 - 1:2 Frequency mo
		e ANDAND DFITMG0.dfi_rddata_use_sdr == 0 : DFITMG0.dfi_t_rddata_en + CRCPARCTL1.dfi_t_phy_rdlat < 'd114 Unit: DFI Clocks
		PSU_DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT                                             0x10

		After a Parity or CRC error is flagged on dfi_alert_n signal, the software has an option to read the mode registers in the DR
		M before the hardware begins the retry process - 1: Wait for software to read/write the mode registers before hardware begins
		the retry. After software is done with its operations, it will clear the alert interrupt register bit - 0: Hardware can begin
		the retry right away after the dfi_alert_n pulse goes away. The value on this register is valid only when retry is enabled (P
		RCTRL.crc_parity_retry_enable = 1) If this register is set to 1 and if the software doesn't clear the interrupt register afte
		 handling the parity/CRC error, then the hardware will not begin the retry process and the system will hang. In the case of P
		rity/CRC error, there are two possibilities when the software doesn't reset MR5[4] to 0. - (i) If 'Persistent parity' mode re
		ister bit is NOT set: the commands sent during retry and normal operation are executed without parity checking. The value in 
		he Parity error log register MPR Page 1 is valid. - (ii) If 'Persistent parity' mode register bit is SET: Parity checking is 
		one for commands sent during retry and normal operation. If multiple errors occur before MR5[4] is cleared, the error log in 
		PR Page 1 should be treated as 'Don't care'.
		PSU_DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW                                           0x1

		- 1: Enable command retry mechanism in case of C/A Parity or CRC error - 0: Disable command retry mechanism when C/A Parity o
		 CRC features are enabled. Note that retry functionality is not supported if burst chop is enabled (MSTR.burstchop = 1) and/o
		 disable auto-refresh is enabled (RFSHCTL3.dis_auto_refresh = 1)
		PSU_DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE                                     0x0

		CRC Calculation setting register - 1: CRC includes DM signal - 0: CRC not includes DM signal Present only in designs configur
		d to support DDR4.
		PSU_DDRC_CRCPARCTL1_CRC_INC_DM                                                  0x0

		CRC enable Register - 1: Enable generation of CRC - 0: Disable generation of CRC The setting of this register should match th
		 CRC mode register setting in the DRAM.
		PSU_DDRC_CRCPARCTL1_CRC_ENABLE                                                  0x0

		C/A Parity enable register - 1: Enable generation of C/A parity and detection of C/A parity error - 0: Disable generation of 
		/A parity and disable detection of C/A parity error If RCD's parity error detection or SDRAM's parity detection is enabled, t
		is register should be 1.
		PSU_DDRC_CRCPARCTL1_PARITY_ENABLE                                               0x0

		CRC Parity Control Register1
		(OFFSET, MASK, VALUE)      (0XFD0700C4, 0x3F000391U ,0x10000200U)  
		RegMask = (DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_MASK | DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_MASK | DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_MASK | DDRC_CRCPARCTL1_CRC_INC_DM_MASK | DDRC_CRCPARCTL1_CRC_ENABLE_MASK | DDRC_CRCPARCTL1_PARITY_ENABLE_MASK |  0 );

		RegVal = ((0x00000010U << DDRC_CRCPARCTL1_DFI_T_PHY_RDLAT_SHIFT
			| 0x00000001U << DDRC_CRCPARCTL1_ALERT_WAIT_FOR_SW_SHIFT
			| 0x00000000U << DDRC_CRCPARCTL1_CRC_PARITY_RETRY_ENABLE_SHIFT
			| 0x00000000U << DDRC_CRCPARCTL1_CRC_INC_DM_SHIFT
			| 0x00000000U << DDRC_CRCPARCTL1_CRC_ENABLE_SHIFT
			| 0x00000000U << DDRC_CRCPARCTL1_PARITY_ENABLE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_CRCPARCTL1_OFFSET ,0x3F000391U ,0x10000200U);
	/*############################################################################################################################ */

		/*Register : CRCPARCTL2 @ 0XFD0700C8</p>

		Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a parity error occurs. Recommended values
		 - tPAR_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tPAR_ALERT_PW.MAX/2 and round up to next inte
		er value. Values of 0, 1 and 2 are illegal. This value must be greater than CRCPARCTL2.t_crc_alert_pw_max.
		PSU_DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX                                          0x40

		Value from the DRAM spec indicating the maximum width of the dfi_alert_n pulse when a CRC error occurs. Recommended values: -
		tCRC_ALERT_PW.MAX For configurations with MEMC_FREQ_RATIO=2, program this to tCRC_ALERT_PW.MAX/2 and round up to next integer
		value. Values of 0, 1 and 2 are illegal. This value must be less than CRCPARCTL2.t_par_alert_pw_max.
		PSU_DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX                                          0x5

		Indicates the maximum duration in number of DRAM clock cycles for which a command should be held in the Command Retry FIFO be
		ore it is popped out. Every location in the Command Retry FIFO has an associated down counting timer that will use this regis
		er as the start value. The down counting starts when a command is loaded into the FIFO. The timer counts down every 4 DRAM cy
		les. When the counter reaches zero, the entry is popped from the FIFO. All the counters are frozen, if a C/A Parity or CRC er
		or occurs before the counter reaches zero. The counter is reset to 0, after all the commands in the FIFO are retried. Recomme
		ded(minimum) values: - Only C/A Parity is enabled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + tPAR_ALERT_ON
		max + tPAR_UNKNOWN + PHY Alert Latency(DRAM CLK) + board delay) / 4) + 2 - Both C/A Parity and CRC is enabled/ Only CRC is en
		bled. RoundUp((PHY Command Latency(DRAM CLK) + CAL + RDIMM delay + WL + 5(BL10)+ tCRC_ALERT.max + PHY Alert Latency(DRAM CLK)
		+ board delay) / 4) + 2 Note 1: All value (e.g. tPAR_ALERT_ON) should be in terms of DRAM Clock and round up Note 2: Board de
		ay(Command/Alert_n) should be considered. Note 3: Use the worst case(longer) value for PHY Latencies/Board delay Note 4: The 
		ecommended values are minimum value to be set. For mode detail, See 'Calculation of FIFO Depth' section. Max value can be set
		to this register is defined below: - MEMC_BURST_LENGTH == 16 Full bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-
		 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Half bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_D
		PTH-4 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-6 Quarter bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CM
		_FIFO_DEPTH-8 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-12 - MEMC_BURST_LENGTH != 16 Full bus Mode (C
		C=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-1 Full bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mo
		e (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-2 Half bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-3 Quarte
		 bus Mode (CRC=OFF) Max value = UMCTL2_RETRY_CMD_FIFO_DEPTH-4 Quarter bus Mode (CRC=ON) Max value = UMCTL2_RETRY_CMD_FIFO_DEP
		H-6 Values of 0, 1 and 2 are illegal.
		PSU_DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4                                0x1f

		CRC Parity Control Register2
		(OFFSET, MASK, VALUE)      (0XFD0700C8, 0x01FF1F3FU ,0x0040051FU)  
		RegMask = (DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_MASK | DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_MASK | DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_MASK |  0 );

		RegVal = ((0x00000040U << DDRC_CRCPARCTL2_T_PAR_ALERT_PW_MAX_SHIFT
			| 0x00000005U << DDRC_CRCPARCTL2_T_CRC_ALERT_PW_MAX_SHIFT
			| 0x0000001FU << DDRC_CRCPARCTL2_RETRY_FIFO_MAX_HOLD_TIMER_X4_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_CRCPARCTL2_OFFSET ,0x01FF1F3FU ,0x0040051FU);
	/*############################################################################################################################ */

		/*Register : INIT0 @ 0XFD0700D0</p>

		If lower bit is enabled the SDRAM initialization routine is skipped. The upper bit decides what state the controller starts u
		 in when reset is removed - 00 - SDRAM Intialization routine is run after power-up - 01 - SDRAM Intialization routine is skip
		ed after power-up. Controller starts up in Normal Mode - 11 - SDRAM Intialization routine is skipped after power-up. Controll
		r starts up in Self-refresh Mode - 10 - SDRAM Intialization routine is run after power-up. Note: The only 2'b00 is supported 
		or LPDDR4 in this version of the uMCTL2.
		PSU_DDRC_INIT0_SKIP_DRAM_INIT                                                   0x0

		Cycles to wait after driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clocks. DDR2 typically requires 
		 400 ns delay, requiring this value to be programmed to 2 at all clock speeds. LPDDR2/LPDDR3 typically requires this to be pr
		grammed for a delay of 200 us. LPDDR4 typically requires this to be programmed for a delay of 2 us. For configurations with M
		MC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it up to next integer value.
		PSU_DDRC_INIT0_POST_CKE_X1024                                                   0x2

		Cycles to wait after reset before driving CKE high to start the SDRAM initialization sequence. Unit: 1024 clock cycles. DDR2 
		pecifications typically require this to be programmed for a delay of >= 200 us. LPDDR2/LPDDR3: tINIT1 of 100 ns (min) LPDDR4:
		tINIT3 of 2 ms (min) For configurations with MEMC_FREQ_RATIO=2, program this to JEDEC spec value divided by 2, and round it u
		 to next integer value.
		PSU_DDRC_INIT0_PRE_CKE_X1024                                                    0x106

		SDRAM Initialization Register 0
		(OFFSET, MASK, VALUE)      (0XFD0700D0, 0xC3FF0FFFU ,0x00020106U)  
		RegMask = (DDRC_INIT0_SKIP_DRAM_INIT_MASK | DDRC_INIT0_POST_CKE_X1024_MASK | DDRC_INIT0_PRE_CKE_X1024_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_INIT0_SKIP_DRAM_INIT_SHIFT
			| 0x00000002U << DDRC_INIT0_POST_CKE_X1024_SHIFT
			| 0x00000106U << DDRC_INIT0_PRE_CKE_X1024_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_INIT0_OFFSET ,0xC3FF0FFFU ,0x00020106U);
	/*############################################################################################################################ */

		/*Register : INIT1 @ 0XFD0700D4</p>

		Number of cycles to assert SDRAM reset signal during init sequence. This is only present for designs supporting DDR3, DDR4 or
		LPDDR4 devices. For use with a DDR PHY, this should be set to a minimum of 1
		PSU_DDRC_INIT1_DRAM_RSTN_X1024                                                  0x2

		Cycles to wait after completing the SDRAM initialization sequence before starting the dynamic scheduler. Unit: Counts of a gl
		bal timer that pulses every 32 clock cycles. There is no known specific requirement for this; it may be set to zero.
		PSU_DDRC_INIT1_FINAL_WAIT_X32                                                   0x0

		Wait period before driving the OCD complete command to SDRAM. Unit: Counts of a global timer that pulses every 32 clock cycle
		. There is no known specific requirement for this; it may be set to zero.
		PSU_DDRC_INIT1_PRE_OCD_X32                                                      0x0

		SDRAM Initialization Register 1
		(OFFSET, MASK, VALUE)      (0XFD0700D4, 0x01FF7F0FU ,0x00020000U)  
		RegMask = (DDRC_INIT1_DRAM_RSTN_X1024_MASK | DDRC_INIT1_FINAL_WAIT_X32_MASK | DDRC_INIT1_PRE_OCD_X32_MASK |  0 );

		RegVal = ((0x00000002U << DDRC_INIT1_DRAM_RSTN_X1024_SHIFT
			| 0x00000000U << DDRC_INIT1_FINAL_WAIT_X32_SHIFT
			| 0x00000000U << DDRC_INIT1_PRE_OCD_X32_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_INIT1_OFFSET ,0x01FF7F0FU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : INIT2 @ 0XFD0700D8</p>

		Idle time after the reset command, tINIT4. Present only in designs configured to support LPDDR2. Unit: 32 clock cycles.
		PSU_DDRC_INIT2_IDLE_AFTER_RESET_X32                                             0x23

		Time to wait after the first CKE high, tINIT2. Present only in designs configured to support LPDDR2/LPDDR3. Unit: 1 clock cyc
		e. LPDDR2/LPDDR3 typically requires 5 x tCK delay.
		PSU_DDRC_INIT2_MIN_STABLE_CLOCK_X1                                              0x5

		SDRAM Initialization Register 2
		(OFFSET, MASK, VALUE)      (0XFD0700D8, 0x0000FF0FU ,0x00002305U)  
		RegMask = (DDRC_INIT2_IDLE_AFTER_RESET_X32_MASK | DDRC_INIT2_MIN_STABLE_CLOCK_X1_MASK |  0 );

		RegVal = ((0x00000023U << DDRC_INIT2_IDLE_AFTER_RESET_X32_SHIFT
			| 0x00000005U << DDRC_INIT2_MIN_STABLE_CLOCK_X1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_INIT2_OFFSET ,0x0000FF0FU ,0x00002305U);
	/*############################################################################################################################ */

		/*Register : INIT3 @ 0XFD0700DC</p>

		DDR2: Value to write to MR register. Bit 8 is for DLL and the setting here is ignored. The uMCTL2 sets this bit appropriately
		 DDR3/DDR4: Value loaded into MR0 register. mDDR: Value to write to MR register. LPDDR2/LPDDR3/LPDDR4 - Value to write to MR1
		register
		PSU_DDRC_INIT3_MR                                                               0x930

		DDR2: Value to write to EMR register. Bits 9:7 are for OCD and the setting in this register is ignored. The uMCTL2 sets those
		bits appropriately. DDR3/DDR4: Value to write to MR1 register Set bit 7 to 0. If PHY-evaluation mode training is enabled, thi
		 bit is set appropriately by the uMCTL2 during write leveling. mDDR: Value to write to EMR register. LPDDR2/LPDDR3/LPDDR4 - V
		lue to write to MR2 register
		PSU_DDRC_INIT3_EMR                                                              0x301

		SDRAM Initialization Register 3
		(OFFSET, MASK, VALUE)      (0XFD0700DC, 0xFFFFFFFFU ,0x09300301U)  
		RegMask = (DDRC_INIT3_MR_MASK | DDRC_INIT3_EMR_MASK |  0 );

		RegVal = ((0x00000930U << DDRC_INIT3_MR_SHIFT
			| 0x00000301U << DDRC_INIT3_EMR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_INIT3_OFFSET ,0xFFFFFFFFU ,0x09300301U);
	/*############################################################################################################################ */

		/*Register : INIT4 @ 0XFD0700E0</p>

		DDR2: Value to write to EMR2 register. DDR3/DDR4: Value to write to MR2 register LPDDR2/LPDDR3/LPDDR4: Value to write to MR3 
		egister mDDR: Unused
		PSU_DDRC_INIT4_EMR2                                                             0x20

		DDR2: Value to write to EMR3 register. DDR3/DDR4: Value to write to MR3 register mDDR/LPDDR2/LPDDR3: Unused LPDDR4: Value to 
		rite to MR13 register
		PSU_DDRC_INIT4_EMR3                                                             0x200

		SDRAM Initialization Register 4
		(OFFSET, MASK, VALUE)      (0XFD0700E0, 0xFFFFFFFFU ,0x00200200U)  
		RegMask = (DDRC_INIT4_EMR2_MASK | DDRC_INIT4_EMR3_MASK |  0 );

		RegVal = ((0x00000020U << DDRC_INIT4_EMR2_SHIFT
			| 0x00000200U << DDRC_INIT4_EMR3_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_INIT4_OFFSET ,0xFFFFFFFFU ,0x00200200U);
	/*############################################################################################################################ */

		/*Register : INIT5 @ 0XFD0700E4</p>

		ZQ initial calibration, tZQINIT. Present only in designs configured to support DDR3 or DDR4 or LPDDR2/LPDDR3. Unit: 32 clock 
		ycles. DDR3 typically requires 512 clocks. DDR4 requires 1024 clocks. LPDDR2/LPDDR3 requires 1 us.
		PSU_DDRC_INIT5_DEV_ZQINIT_X32                                                   0x21

		Maximum duration of the auto initialization, tINIT5. Present only in designs configured to support LPDDR2/LPDDR3. LPDDR2/LPDD
		3 typically requires 10 us.
		PSU_DDRC_INIT5_MAX_AUTO_INIT_X1024                                              0x4

		SDRAM Initialization Register 5
		(OFFSET, MASK, VALUE)      (0XFD0700E4, 0x00FF03FFU ,0x00210004U)  
		RegMask = (DDRC_INIT5_DEV_ZQINIT_X32_MASK | DDRC_INIT5_MAX_AUTO_INIT_X1024_MASK |  0 );

		RegVal = ((0x00000021U << DDRC_INIT5_DEV_ZQINIT_X32_SHIFT
			| 0x00000004U << DDRC_INIT5_MAX_AUTO_INIT_X1024_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_INIT5_OFFSET ,0x00FF03FFU ,0x00210004U);
	/*############################################################################################################################ */

		/*Register : INIT6 @ 0XFD0700E8</p>

		DDR4- Value to be loaded into SDRAM MR4 registers. Used in DDR4 designs only.
		PSU_DDRC_INIT6_MR4                                                              0x0

		DDR4- Value to be loaded into SDRAM MR5 registers. Used in DDR4 designs only.
		PSU_DDRC_INIT6_MR5                                                              0x6c0

		SDRAM Initialization Register 6
		(OFFSET, MASK, VALUE)      (0XFD0700E8, 0xFFFFFFFFU ,0x000006C0U)  
		RegMask = (DDRC_INIT6_MR4_MASK | DDRC_INIT6_MR5_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_INIT6_MR4_SHIFT
			| 0x000006C0U << DDRC_INIT6_MR5_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_INIT6_OFFSET ,0xFFFFFFFFU ,0x000006C0U);
	/*############################################################################################################################ */

		/*Register : INIT7 @ 0XFD0700EC</p>

		DDR4- Value to be loaded into SDRAM MR6 registers. Used in DDR4 designs only.
		PSU_DDRC_INIT7_MR6                                                              0x819

		SDRAM Initialization Register 7
		(OFFSET, MASK, VALUE)      (0XFD0700EC, 0xFFFF0000U ,0x08190000U)  
		RegMask = (DDRC_INIT7_MR6_MASK |  0 );

		RegVal = ((0x00000819U << DDRC_INIT7_MR6_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_INIT7_OFFSET ,0xFFFF0000U ,0x08190000U);
	/*############################################################################################################################ */

		/*Register : DIMMCTL @ 0XFD0700F0</p>

		Disabling Address Mirroring for BG bits. When this is set to 1, BG0 and BG1 are NOT swapped even if Address Mirroring is enab
		ed. This will be required for DDR4 DIMMs with x16 devices. - 1 - BG0 and BG1 are NOT swapped. - 0 - BG0 and BG1 are swapped i
		 address mirroring is enabled.
		PSU_DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING                                          0x0

		Enable for BG1 bit of MRS command. BG1 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
		 be programmed to 0 during MRS. In case where DRAMs which do not have BG1 are attached and both the CA parity and the Output 
		nversion are enabled, this must be set to 0, so that the calculation of CA parity will not include BG1 bit. Note: This has no
		effect on the address of any other memory accesses, or of software-driven mode register accesses. If address mirroring is ena
		led, this is applied to BG1 of even ranks and BG0 of odd ranks. - 1 - Enabled - 0 - Disabled
		PSU_DDRC_DIMMCTL_MRS_BG1_EN                                                     0x1

		Enable for A17 bit of MRS command. A17 bit of the mode register address is specified as RFU (Reserved for Future Use) and mus
		 be programmed to 0 during MRS. In case where DRAMs which do not have A17 are attached and the Output Inversion are enabled, 
		his must be set to 0, so that the calculation of CA parity will not include A17 bit. Note: This has no effect on the address 
		f any other memory accesses, or of software-driven mode register accesses. - 1 - Enabled - 0 - Disabled
		PSU_DDRC_DIMMCTL_MRS_A17_EN                                                     0x0

		Output Inversion Enable (for DDR4 RDIMM implementations only). DDR4 RDIMM implements the Output Inversion feature by default,
		which means that the following address, bank address and bank group bits of B-side DRAMs are inverted: A3-A9, A11, A13, A17, 
		A0-BA1, BG0-BG1. Setting this bit ensures that, for mode register accesses generated by the uMCTL2 during the automatic initi
		lization routine and enabling of a particular DDR4 feature, separate A-side and B-side mode register accesses are generated. 
		or B-side mode register accesses, these bits are inverted within the uMCTL2 to compensate for this RDIMM inversion. Note: Thi
		 has no effect on the address of any other memory accesses, or of software-driven mode register accesses. - 1 - Implement out
		ut inversion for B-side DRAMs. - 0 - Do not implement output inversion for B-side DRAMs.
		PSU_DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN                                             0x0

		Address Mirroring Enable (for multi-rank UDIMM implementations and multi-rank DDR4 RDIMM implementations). Some UDIMMs and DD
		4 RDIMMs implement address mirroring for odd ranks, which means that the following address, bank address and bank group bits 
		re swapped: (A3, A4), (A5, A6), (A7, A8), (BA0, BA1) and also (A11, A13), (BG0, BG1) for the DDR4. Setting this bit ensures t
		at, for mode register accesses during the automatic initialization routine, these bits are swapped within the uMCTL2 to compe
		sate for this UDIMM/RDIMM swapping. In addition to the automatic initialization routine, in case of DDR4 UDIMM/RDIMM, they ar
		 swapped during the automatic MRS access to enable/disable of a particular DDR4 feature. Note: This has no effect on the addr
		ss of any other memory accesses, or of software-driven mode register accesses. This is not supported for mDDR, LPDDR2, LPDDR3
		or LPDDR4 SDRAMs. Note: In case of x16 DDR4 DIMMs, BG1 output of MRS for the odd ranks is same as BG0 because BG1 is invalid,
		hence dimm_dis_bg_mirroring register must be set to 1. - 1 - For odd ranks, implement address mirroring for MRS commands to d
		ring initialization and for any automatic DDR4 MRS commands (to be used if UDIMM/RDIMM implements address mirroring) - 0 - Do
		not implement address mirroring
		PSU_DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN                                              0x0

		Staggering enable for multi-rank accesses (for multi-rank UDIMM and RDIMM implementations only). This is not supported for mD
		R, LPDDR2, LPDDR3 or LPDDR4 SDRAMs. Note: Even if this bit is set it does not take care of software driven MR commands (via M
		CTRL0/MRCTRL1), where software is responsible to send them to seperate ranks as appropriate. - 1 - (DDR4) Send MRS commands t
		 each ranks seperately - 1 - (non-DDR4) Send all commands to even and odd ranks seperately - 0 - Do not stagger accesses
		PSU_DDRC_DIMMCTL_DIMM_STAGGER_CS_EN                                             0x0

		DIMM Control Register
		(OFFSET, MASK, VALUE)      (0XFD0700F0, 0x0000003FU ,0x00000010U)  
		RegMask = (DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_MASK | DDRC_DIMMCTL_MRS_BG1_EN_MASK | DDRC_DIMMCTL_MRS_A17_EN_MASK | DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_MASK | DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_MASK | DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_DIMMCTL_DIMM_DIS_BG_MIRRORING_SHIFT
			| 0x00000001U << DDRC_DIMMCTL_MRS_BG1_EN_SHIFT
			| 0x00000000U << DDRC_DIMMCTL_MRS_A17_EN_SHIFT
			| 0x00000000U << DDRC_DIMMCTL_DIMM_OUTPUT_INV_EN_SHIFT
			| 0x00000000U << DDRC_DIMMCTL_DIMM_ADDR_MIRR_EN_SHIFT
			| 0x00000000U << DDRC_DIMMCTL_DIMM_STAGGER_CS_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DIMMCTL_OFFSET ,0x0000003FU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : RANKCTL @ 0XFD0700F4</p>

		Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
		e writes to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should c
		nsider both PHY requirement and ODT requirement. - PHY requirement: tphy_wrcsgap + 1 (see PHY databook for value of tphy_wrcs
		ap) If CRC feature is enabled, should be increased by 1. If write preamble is set to 2tCK(DDR4/LPDDR4 only), should be increa
		ed by 1. If write postamble is set to 1.5tCK(LPDDR4 only), should be increased by 1. - ODT requirement: The value programmed 
		n this register takes care of the ODT switch off timing requirement when switching ranks during writes. For LPDDR4, the requi
		ement is ODTLoff - ODTLon - BL/2 + 1 For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY requirement
		or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and round it u
		 to the next integer.
		PSU_DDRC_RANKCTL_DIFF_RANK_WR_GAP                                               0x6

		Only present for multi-rank configurations. Indicates the number of clocks of gap in data responses when performing consecuti
		e reads to different ranks. This is used to switch the delays in the PHY to match the rank requirements. This value should co
		sider both PHY requirement and ODT requirement. - PHY requirement: tphy_rdcsgap + 1 (see PHY databook for value of tphy_rdcsg
		p) If read preamble is set to 2tCK(DDR4/LPDDR4 only), should be increased by 1. If read postamble is set to 1.5tCK(LPDDR4 onl
		), should be increased by 1. - ODT requirement: The value programmed in this register takes care of the ODT switch off timing
		requirement when switching ranks during reads. For configurations with MEMC_FREQ_RATIO=1, program this to the larger of PHY r
		quirement or ODT requirement. For configurations with MEMC_FREQ_RATIO=2, program this to the larger value divided by two and 
		ound it up to the next integer.
		PSU_DDRC_RANKCTL_DIFF_RANK_RD_GAP                                               0x6

		Only present for multi-rank configurations. Background: Reads to the same rank can be performed back-to-back. Reads to differ
		nt ranks require additional gap dictated by the register RANKCTL.diff_rank_rd_gap. This is to avoid possible data bus content
		on as well as to give PHY enough time to switch the delay when changing ranks. The uMCTL2 arbitrates for bus access on a cycl
		-by-cycle basis; therefore after a read is scheduled, there are few clock cycles (determined by the value on RANKCTL.diff_ran
		_rd_gap register) in which only reads from the same rank are eligible to be scheduled. This prevents reads from other ranks f
		om having fair access to the data bus. This parameter represents the maximum number of reads that can be scheduled consecutiv
		ly to the same rank. After this number is reached, a delay equal to RANKCTL.diff_rank_rd_gap is inserted by the scheduler to 
		llow all ranks a fair opportunity to be scheduled. Higher numbers increase bandwidth utilization, lower numbers increase fair
		ess. This feature can be DISABLED by setting this register to 0. When set to 0, the Controller will stay on the same rank as 
		ong as commands are available for it. Minimum programmable value is 0 (feature disabled) and maximum programmable value is 0x
		. FOR PERFORMANCE ONLY.
		PSU_DDRC_RANKCTL_MAX_RANK_RD                                                    0xf

		Rank Control Register
		(OFFSET, MASK, VALUE)      (0XFD0700F4, 0x00000FFFU ,0x0000066FU)  
		RegMask = (DDRC_RANKCTL_DIFF_RANK_WR_GAP_MASK | DDRC_RANKCTL_DIFF_RANK_RD_GAP_MASK | DDRC_RANKCTL_MAX_RANK_RD_MASK |  0 );

		RegVal = ((0x00000006U << DDRC_RANKCTL_DIFF_RANK_WR_GAP_SHIFT
			| 0x00000006U << DDRC_RANKCTL_DIFF_RANK_RD_GAP_SHIFT
			| 0x0000000FU << DDRC_RANKCTL_MAX_RANK_RD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_RANKCTL_OFFSET ,0x00000FFFU ,0x0000066FU);
	/*############################################################################################################################ */

		/*Register : DRAMTMG0 @ 0XFD070100</p>

		Minimum time between write and precharge to same bank. Unit: Clocks Specifications: WL + BL/2 + tWR = approximately 8 cycles 
		 15 ns = 14 clocks @400MHz and less for lower frequencies where: - WL = write latency - BL = burst length. This must match th
		 value programmed in the BL bit of the mode register to the SDRAM. BST (burst terminate) is not supported at present. - tWR =
		Write recovery time. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 for this 
		arameter. For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For configurations
		with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer value.
		PSU_DDRC_DRAMTMG0_WR2PRE                                                        0x11

		tFAW Valid only when 8 or more banks(or banks x bank groups) are present. In 8-bank design, at most 4 banks must be activated
		in a rolling window of tFAW cycles. For configurations with MEMC_FREQ_RATIO=2, program this to (tFAW/2) and round up to next 
		nteger value. In a 4-bank design, set this register to 0x1 independent of the MEMC_FREQ_RATIO configuration. Unit: Clocks
		PSU_DDRC_DRAMTMG0_T_FAW                                                         0xc

		tRAS(max): Maximum time between activate and precharge to same bank. This is the maximum time that a page can be kept open Mi
		imum value of this register is 1. Zero is invalid. For configurations with MEMC_FREQ_RATIO=2, program this to (tRAS(max)-1)/2
		 No rounding up. Unit: Multiples of 1024 clocks.
		PSU_DDRC_DRAMTMG0_T_RAS_MAX                                                     0x24

		tRAS(min): Minimum time between activate and precharge to the same bank. For configurations with MEMC_FREQ_RATIO=2, 1T mode, 
		rogram this to tRAS(min)/2. No rounding up. For configurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, program this t
		 (tRAS(min)/2) and round it up to the next integer value. Unit: Clocks
		PSU_DDRC_DRAMTMG0_T_RAS_MIN                                                     0x12

		SDRAM Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD070100, 0x7F3F7F3FU ,0x110C2412U)  
		RegMask = (DDRC_DRAMTMG0_WR2PRE_MASK | DDRC_DRAMTMG0_T_FAW_MASK | DDRC_DRAMTMG0_T_RAS_MAX_MASK | DDRC_DRAMTMG0_T_RAS_MIN_MASK |  0 );

		RegVal = ((0x00000011U << DDRC_DRAMTMG0_WR2PRE_SHIFT
			| 0x0000000CU << DDRC_DRAMTMG0_T_FAW_SHIFT
			| 0x00000024U << DDRC_DRAMTMG0_T_RAS_MAX_SHIFT
			| 0x00000012U << DDRC_DRAMTMG0_T_RAS_MIN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG0_OFFSET ,0x7F3F7F3FU ,0x110C2412U);
	/*############################################################################################################################ */

		/*Register : DRAMTMG1 @ 0XFD070104</p>

		tXP: Minimum time after power-down exit to any operation. For DDR3, this should be programmed to tXPDLL if slow powerdown exi
		 is selected in MR0[12]. If C/A parity for DDR4 is used, set to (tXP+PL) instead. For configurations with MEMC_FREQ_RATIO=2, 
		rogram this to (tXP/2) and round it up to the next integer value. Units: Clocks
		PSU_DDRC_DRAMTMG1_T_XP                                                          0x4

		tRTP: Minimum time from read to precharge of same bank. - DDR2: tAL + BL/2 + max(tRTP, 2) - 2 - DDR3: tAL + max (tRTP, 4) - D
		R4: Max of following two equations: tAL + max (tRTP, 4) or, RL + BL/2 - tRP. - mDDR: BL/2 - LPDDR2: Depends on if it's LPDDR2
		S2 or LPDDR2-S4: LPDDR2-S2: BL/2 + tRTP - 1. LPDDR2-S4: BL/2 + max(tRTP,2) - 2. - LPDDR3: BL/2 + max(tRTP,4) - 4 - LPDDR4: BL
		2 + max(tRTP,8) - 8 For configurations with MEMC_FREQ_RATIO=2, 1T mode, divide the above value by 2. No rounding up. For conf
		gurations with MEMC_FREQ_RATIO=2, 2T mode or LPDDR4 mode, divide the above value by 2 and round it up to the next integer val
		e. Unit: Clocks.
		PSU_DDRC_DRAMTMG1_RD2PRE                                                        0x4

		tRC: Minimum time between activates to same bank. For configurations with MEMC_FREQ_RATIO=2, program this to (tRC/2) and roun
		 up to next integer value. Unit: Clocks.
		PSU_DDRC_DRAMTMG1_T_RC                                                          0x19

		SDRAM Timing Register 1
		(OFFSET, MASK, VALUE)      (0XFD070104, 0x001F1F7FU ,0x00040419U)  
		RegMask = (DDRC_DRAMTMG1_T_XP_MASK | DDRC_DRAMTMG1_RD2PRE_MASK | DDRC_DRAMTMG1_T_RC_MASK |  0 );

		RegVal = ((0x00000004U << DDRC_DRAMTMG1_T_XP_SHIFT
			| 0x00000004U << DDRC_DRAMTMG1_RD2PRE_SHIFT
			| 0x00000019U << DDRC_DRAMTMG1_T_RC_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG1_OFFSET ,0x001F1F7FU ,0x00040419U);
	/*############################################################################################################################ */

		/*Register : DRAMTMG2 @ 0XFD070108</p>

		Set to WL Time from write command to write data on SDRAM interface. This must be set to WL. For mDDR, it should normally be s
		t to 1. Note that, depending on the PHY, if using RDIMM, it may be necessary to use a value of WL + 1 to compensate for the e
		tra cycle of latency through the RDIMM For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above
		equation by 2, and round it up to next integer. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAININ
		 is set), as the DFI read and write latencies defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks
		PSU_DDRC_DRAMTMG2_WRITE_LATENCY                                                 0x7

		Set to RL Time from read command to read data on SDRAM interface. This must be set to RL. Note that, depending on the PHY, if
		using RDIMM, it mat be necessary to use a value of RL + 1 to compensate for the extra cycle of latency through the RDIMM For 
		onfigurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next inte
		er. This register field is not required for DDR2 and DDR3 (except if MEMC_TRAINING is set), as the DFI read and write latenci
		s defined in DFITMG0 and DFITMG1 are sufficient for those protocols Unit: clocks
		PSU_DDRC_DRAMTMG2_READ_LATENCY                                                  0x8

		DDR2/3/mDDR: RL + BL/2 + 2 - WL DDR4: RL + BL/2 + 1 + WR_PREAMBLE - WL LPDDR2/LPDDR3: RL + BL/2 + RU(tDQSCKmax/tCK) + 1 - WL 
		PDDR4(DQ ODT is Disabled): RL + BL/2 + RU(tDQSCKmax/tCK) + WR_PREAMBLE + RD_POSTAMBLE - WL LPDDR4(DQ ODT is Enabled) : RL + B
		/2 + RU(tDQSCKmax/tCK) + RD_POSTAMBLE - ODTLon - RU(tODTon(min)/tCK) Minimum time from read command to write command. Include
		time for bus turnaround and all per-bank, per-rank, and global constraints. Unit: Clocks. Where: - WL = write latency - BL = 
		urst length. This must match the value programmed in the BL bit of the mode register to the SDRAM - RL = read latency = CAS l
		tency - WR_PREAMBLE = write preamble. This is unique to DDR4 and LPDDR4. - RD_POSTAMBLE = read postamble. This is unique to L
		DDR4. For LPDDR2/LPDDR3/LPDDR4, if derating is enabled (DERATEEN.derate_enable=1), derated tDQSCKmax should be used. For conf
		gurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.
		PSU_DDRC_DRAMTMG2_RD2WR                                                         0x6

		DDR4: CWL + PL + BL/2 + tWTR_L Others: CWL + BL/2 + tWTR In DDR4, minimum time from write command to read command for same ba
		k group. In others, minimum time from write command to read command. Includes time for bus turnaround, recovery times, and al
		 per-bank, per-rank, and global constraints. Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burs
		 length. This must match the value programmed in the BL bit of the mode register to the SDRAM - tWTR_L = internal write to re
		d command delay for same bank group. This comes directly from the SDRAM specification. - tWTR = internal write to read comman
		 delay. This comes directly from the SDRAM specification. Add one extra cycle for LPDDR2/LPDDR3/LPDDR4 operation. For configu
		ations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next integer.
		PSU_DDRC_DRAMTMG2_WR2RD                                                         0xe

		SDRAM Timing Register 2
		(OFFSET, MASK, VALUE)      (0XFD070108, 0x3F3F3F3FU ,0x0708060EU)  
		RegMask = (DDRC_DRAMTMG2_WRITE_LATENCY_MASK | DDRC_DRAMTMG2_READ_LATENCY_MASK | DDRC_DRAMTMG2_RD2WR_MASK | DDRC_DRAMTMG2_WR2RD_MASK |  0 );

		RegVal = ((0x00000007U << DDRC_DRAMTMG2_WRITE_LATENCY_SHIFT
			| 0x00000008U << DDRC_DRAMTMG2_READ_LATENCY_SHIFT
			| 0x00000006U << DDRC_DRAMTMG2_RD2WR_SHIFT
			| 0x0000000EU << DDRC_DRAMTMG2_WR2RD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG2_OFFSET ,0x3F3F3F3FU ,0x0708060EU);
	/*############################################################################################################################ */

		/*Register : DRAMTMG3 @ 0XFD07010C</p>

		Time to wait after a mode register write or read (MRW or MRR). Present only in designs configured to support LPDDR2, LPDDR3 o
		 LPDDR4. LPDDR2 typically requires value of 5. LPDDR3 typically requires value of 10. LPDDR4: Set this to the larger of tMRW 
		nd tMRWCKEL. For LPDDR2, this register is used for the time from a MRW/MRR to all other commands. For LDPDR3, this register i
		 used for the time from a MRW/MRR to a MRW/MRR.
		PSU_DDRC_DRAMTMG3_T_MRW                                                         0x5

		tMRD: Cycles to wait after a mode register write or read. Depending on the connected SDRAM, tMRD represents: DDR2/mDDR: Time 
		rom MRS to any command DDR3/4: Time from MRS to MRS command LPDDR2: not used LPDDR3/4: Time from MRS to non-MRS command For c
		nfigurations with MEMC_FREQ_RATIO=2, program this to (tMRD/2) and round it up to the next integer value. If C/A parity for DD
		4 is used, set to tMRD_PAR(tMOD+PL) instead.
		PSU_DDRC_DRAMTMG3_T_MRD                                                         0x4

		tMOD: Parameter used only in DDR3 and DDR4. Cycles between load mode command and following non-load mode command. If C/A pari
		y for DDR4 is used, set to tMOD_PAR(tMOD+PL) instead. Set to tMOD if MEMC_FREQ_RATIO=1, or tMOD/2 (rounded up to next integer
		 if MEMC_FREQ_RATIO=2. Note that if using RDIMM, depending on the PHY, it may be necessary to use a value of tMOD + 1 or (tMO
		 + 1)/2 to compensate for the extra cycle of latency applied to mode register writes by the RDIMM chip.
		PSU_DDRC_DRAMTMG3_T_MOD                                                         0xc

		SDRAM Timing Register 3
		(OFFSET, MASK, VALUE)      (0XFD07010C, 0x3FF3F3FFU ,0x0050400CU)  
		RegMask = (DDRC_DRAMTMG3_T_MRW_MASK | DDRC_DRAMTMG3_T_MRD_MASK | DDRC_DRAMTMG3_T_MOD_MASK |  0 );

		RegVal = ((0x00000005U << DDRC_DRAMTMG3_T_MRW_SHIFT
			| 0x00000004U << DDRC_DRAMTMG3_T_MRD_SHIFT
			| 0x0000000CU << DDRC_DRAMTMG3_T_MOD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG3_OFFSET ,0x3FF3F3FFU ,0x0050400CU);
	/*############################################################################################################################ */

		/*Register : DRAMTMG4 @ 0XFD070110</p>

		tRCD - tAL: Minimum time from activate to read or write command to same bank. For configurations with MEMC_FREQ_RATIO=2, prog
		am this to ((tRCD - tAL)/2) and round it up to the next integer value. Minimum value allowed for this register is 1, which im
		lies minimum (tRCD - tAL) value to be 2 in configurations with MEMC_FREQ_RATIO=2. Unit: Clocks.
		PSU_DDRC_DRAMTMG4_T_RCD                                                         0x8

		DDR4: tCCD_L: This is the minimum time between two reads or two writes for same bank group. Others: tCCD: This is the minimum
		time between two reads or two writes. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_L/2 or tCCD/2) and rou
		d it up to the next integer value. Unit: clocks.
		PSU_DDRC_DRAMTMG4_T_CCD                                                         0x3

		DDR4: tRRD_L: Minimum time between activates from bank 'a' to bank 'b' for same bank group. Others: tRRD: Minimum time betwee
		 activates from bank 'a' to bank 'b'For configurations with MEMC_FREQ_RATIO=2, program this to (tRRD_L/2 or tRRD/2) and round
		it up to the next integer value. Unit: Clocks.
		PSU_DDRC_DRAMTMG4_T_RRD                                                         0x3

		tRP: Minimum time from precharge to activate of same bank. For MEMC_FREQ_RATIO=1 configurations, t_rp should be set to RoundU
		(tRP/tCK). For MEMC_FREQ_RATIO=2 configurations, t_rp should be set to RoundDown(RoundUp(tRP/tCK)/2) + 1. For MEMC_FREQ_RATIO
		2 configurations in LPDDR4, t_rp should be set to RoundUp(RoundUp(tRP/tCK)/2). Unit: Clocks.
		PSU_DDRC_DRAMTMG4_T_RP                                                          0x9

		SDRAM Timing Register 4
		(OFFSET, MASK, VALUE)      (0XFD070110, 0x1F0F0F1FU ,0x08030309U)  
		RegMask = (DDRC_DRAMTMG4_T_RCD_MASK | DDRC_DRAMTMG4_T_CCD_MASK | DDRC_DRAMTMG4_T_RRD_MASK | DDRC_DRAMTMG4_T_RP_MASK |  0 );

		RegVal = ((0x00000008U << DDRC_DRAMTMG4_T_RCD_SHIFT
			| 0x00000003U << DDRC_DRAMTMG4_T_CCD_SHIFT
			| 0x00000003U << DDRC_DRAMTMG4_T_RRD_SHIFT
			| 0x00000009U << DDRC_DRAMTMG4_T_RP_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG4_OFFSET ,0x1F0F0F1FU ,0x08030309U);
	/*############################################################################################################################ */

		/*Register : DRAMTMG5 @ 0XFD070114</p>

		This is the time before Self Refresh Exit that CK is maintained as a valid clock before issuing SRX. Specifies the clock stab
		e time before SRX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEH - DDR2: 1 - DDR3: tCKSRX - DDR4:
		tCKSRX For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next in
		eger.
		PSU_DDRC_DRAMTMG5_T_CKSRX                                                       0x6

		This is the time after Self Refresh Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay afte
		 SRE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL - DDR2: 1 - DDR3: max (10 ns, 5 tCK) - DDR4: 
		ax (10 ns, 5 tCK) For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up
		to next integer.
		PSU_DDRC_DRAMTMG5_T_CKSRE                                                       0x6

		Minimum CKE low width for Self refresh or Self refresh power down entry to exit timing in memory clock cycles. Recommended se
		tings: - mDDR: tRFC - LPDDR2: tCKESR - LPDDR3: tCKESR - LPDDR4: max(tCKELPD, tSR) - DDR2: tCKE - DDR3: tCKE + 1 - DDR4: tCKE 
		 1 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it up to next intege
		.
		PSU_DDRC_DRAMTMG5_T_CKESR                                                       0x4

		Minimum number of cycles of CKE HIGH/LOW during power-down and self refresh. - LPDDR2/LPDDR3 mode: Set this to the larger of 
		CKE or tCKESR - LPDDR4 mode: Set this to the larger of tCKE, tCKELPD or tSR. - Non-LPDDR2/non-LPDDR3/non-LPDDR4 designs: Set 
		his to tCKE value. For configurations with MEMC_FREQ_RATIO=2, program this to (value described above)/2 and round it up to th
		 next integer value. Unit: Clocks.
		PSU_DDRC_DRAMTMG5_T_CKE                                                         0x3

		SDRAM Timing Register 5
		(OFFSET, MASK, VALUE)      (0XFD070114, 0x0F0F3F1FU ,0x06060403U)  
		RegMask = (DDRC_DRAMTMG5_T_CKSRX_MASK | DDRC_DRAMTMG5_T_CKSRE_MASK | DDRC_DRAMTMG5_T_CKESR_MASK | DDRC_DRAMTMG5_T_CKE_MASK |  0 );

		RegVal = ((0x00000006U << DDRC_DRAMTMG5_T_CKSRX_SHIFT
			| 0x00000006U << DDRC_DRAMTMG5_T_CKSRE_SHIFT
			| 0x00000004U << DDRC_DRAMTMG5_T_CKESR_SHIFT
			| 0x00000003U << DDRC_DRAMTMG5_T_CKE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG5_OFFSET ,0x0F0F3F1FU ,0x06060403U);
	/*############################################################################################################################ */

		/*Register : DRAMTMG6 @ 0XFD070118</p>

		This is the time after Deep Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after 
		PDE. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, program this to recom
		ended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3
		devices.
		PSU_DDRC_DRAMTMG6_T_CKDPDE                                                      0x1

		This is the time before Deep Power Down Exit that CK is maintained as a valid clock before issuing DPDX. Specifies the clock 
		table time before DPDX. Recommended settings: - mDDR: 1 - LPDDR2: 2 - LPDDR3: 2 For configurations with MEMC_FREQ_RATIO=2, pr
		gram this to recommended value divided by two and round it up to next integer. This is only present for designs supporting mD
		R or LPDDR2 devices.
		PSU_DDRC_DRAMTMG6_T_CKDPDX                                                      0x1

		This is the time before Clock Stop Exit that CK is maintained as a valid clock before issuing Clock Stop Exit. Specifies the 
		lock stable time before next command after Clock Stop Exit. Recommended settings: - mDDR: 1 - LPDDR2: tXP + 2 - LPDDR3: tXP +
		2 - LPDDR4: tXP + 2 For configurations with MEMC_FREQ_RATIO=2, program this to recommended value divided by two and round it 
		p to next integer. This is only present for designs supporting mDDR or LPDDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_DRAMTMG6_T_CKCSX                                                       0x4

		SDRAM Timing Register 6
		(OFFSET, MASK, VALUE)      (0XFD070118, 0x0F0F000FU ,0x01010004U)  
		RegMask = (DDRC_DRAMTMG6_T_CKDPDE_MASK | DDRC_DRAMTMG6_T_CKDPDX_MASK | DDRC_DRAMTMG6_T_CKCSX_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_DRAMTMG6_T_CKDPDE_SHIFT
			| 0x00000001U << DDRC_DRAMTMG6_T_CKDPDX_SHIFT
			| 0x00000004U << DDRC_DRAMTMG6_T_CKCSX_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG6_OFFSET ,0x0F0F000FU ,0x01010004U);
	/*############################################################################################################################ */

		/*Register : DRAMTMG7 @ 0XFD07011C</p>

		This is the time after Power Down Entry that CK is maintained as a valid clock. Specifies the clock disable delay after PDE. 
		ecommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: tCKCKEL For configurations with MEMC_FREQ_RATIO=2, program t
		is to recommended value divided by two and round it up to next integer. This is only present for designs supporting mDDR or L
		DDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_DRAMTMG7_T_CKPDE                                                       0x6

		This is the time before Power Down Exit that CK is maintained as a valid clock before issuing PDX. Specifies the clock stable
		time before PDX. Recommended settings: - mDDR: 0 - LPDDR2: 2 - LPDDR3: 2 - LPDDR4: 2 For configurations with MEMC_FREQ_RATIO=
		, program this to recommended value divided by two and round it up to next integer. This is only present for designs supporti
		g mDDR or LPDDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_DRAMTMG7_T_CKPDX                                                       0x6

		SDRAM Timing Register 7
		(OFFSET, MASK, VALUE)      (0XFD07011C, 0x00000F0FU ,0x00000606U)  
		RegMask = (DDRC_DRAMTMG7_T_CKPDE_MASK | DDRC_DRAMTMG7_T_CKPDX_MASK |  0 );

		RegVal = ((0x00000006U << DDRC_DRAMTMG7_T_CKPDE_SHIFT
			| 0x00000006U << DDRC_DRAMTMG7_T_CKPDX_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG7_OFFSET ,0x00000F0FU ,0x00000606U);
	/*############################################################################################################################ */

		/*Register : DRAMTMG8 @ 0XFD070120</p>

		tXS_FAST: Exit Self Refresh to ZQCL, ZQCS and MRS (only CL, WR, RTP and Geardown mode). For configurations with MEMC_FREQ_RAT
		O=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Thi
		 is applicable to only ZQCL/ZQCS commands. Note: Ensure this is less than or equal to t_xs_x32.
		PSU_DDRC_DRAMTMG8_T_XS_FAST_X32                                                 0x4

		tXS_ABORT: Exit Self Refresh to commands not requiring a locked DLL in Self Refresh Abort. For configurations with MEMC_FREQ_
		ATIO=2, program this to the above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: 
		nsure this is less than or equal to t_xs_x32.
		PSU_DDRC_DRAMTMG8_T_XS_ABORT_X32                                                0x4

		tXSDLL: Exit Self Refresh to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the 
		bove value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and 
		DR4 SDRAMs.
		PSU_DDRC_DRAMTMG8_T_XS_DLL_X32                                                  0xd

		tXS: Exit Self Refresh to commands not requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program this to the
		above value divided by 2 and round up to next integer value. Unit: Multiples of 32 clocks. Note: Used only for DDR2, DDR3 and
		DDR4 SDRAMs.
		PSU_DDRC_DRAMTMG8_T_XS_X32                                                      0x6

		SDRAM Timing Register 8
		(OFFSET, MASK, VALUE)      (0XFD070120, 0x7F7F7F7FU ,0x04040D06U)  
		RegMask = (DDRC_DRAMTMG8_T_XS_FAST_X32_MASK | DDRC_DRAMTMG8_T_XS_ABORT_X32_MASK | DDRC_DRAMTMG8_T_XS_DLL_X32_MASK | DDRC_DRAMTMG8_T_XS_X32_MASK |  0 );

		RegVal = ((0x00000004U << DDRC_DRAMTMG8_T_XS_FAST_X32_SHIFT
			| 0x00000004U << DDRC_DRAMTMG8_T_XS_ABORT_X32_SHIFT
			| 0x0000000DU << DDRC_DRAMTMG8_T_XS_DLL_X32_SHIFT
			| 0x00000006U << DDRC_DRAMTMG8_T_XS_X32_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG8_OFFSET ,0x7F7F7F7FU ,0x04040D06U);
	/*############################################################################################################################ */

		/*Register : DRAMTMG9 @ 0XFD070124</p>

		DDR4 Write preamble mode - 0: 1tCK preamble - 1: 2tCK preamble Present only with MEMC_FREQ_RATIO=2
		PSU_DDRC_DRAMTMG9_DDR4_WR_PREAMBLE                                              0x0

		tCCD_S: This is the minimum time between two reads or two writes for different bank group. For bank switching (from bank 'a' 
		o bank 'b'), the minimum time is this value + 1. For configurations with MEMC_FREQ_RATIO=2, program this to (tCCD_S/2) and ro
		nd it up to the next integer value. Present only in designs configured to support DDR4. Unit: clocks.
		PSU_DDRC_DRAMTMG9_T_CCD_S                                                       0x2

		tRRD_S: Minimum time between activates from bank 'a' to bank 'b' for different bank group. For configurations with MEMC_FREQ_
		ATIO=2, program this to (tRRD_S/2) and round it up to the next integer value. Present only in designs configured to support D
		R4. Unit: Clocks.
		PSU_DDRC_DRAMTMG9_T_RRD_S                                                       0x2

		CWL + PL + BL/2 + tWTR_S Minimum time from write command to read command for different bank group. Includes time for bus turn
		round, recovery times, and all per-bank, per-rank, and global constraints. Present only in designs configured to support DDR4
		 Unit: Clocks. Where: - CWL = CAS write latency - PL = Parity latency - BL = burst length. This must match the value programm
		d in the BL bit of the mode register to the SDRAM - tWTR_S = internal write to read command delay for different bank group. T
		is comes directly from the SDRAM specification. For configurations with MEMC_FREQ_RATIO=2, divide the value calculated using 
		he above equation by 2, and round it up to next integer.
		PSU_DDRC_DRAMTMG9_WR2RD_S                                                       0xb

		SDRAM Timing Register 9
		(OFFSET, MASK, VALUE)      (0XFD070124, 0x40070F3FU ,0x0002020BU)  
		RegMask = (DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_MASK | DDRC_DRAMTMG9_T_CCD_S_MASK | DDRC_DRAMTMG9_T_RRD_S_MASK | DDRC_DRAMTMG9_WR2RD_S_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_DRAMTMG9_DDR4_WR_PREAMBLE_SHIFT
			| 0x00000002U << DDRC_DRAMTMG9_T_CCD_S_SHIFT
			| 0x00000002U << DDRC_DRAMTMG9_T_RRD_S_SHIFT
			| 0x0000000BU << DDRC_DRAMTMG9_WR2RD_S_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG9_OFFSET ,0x40070F3FU ,0x0002020BU);
	/*############################################################################################################################ */

		/*Register : DRAMTMG11 @ 0XFD07012C</p>

		tXMPDLL: This is the minimum Exit MPSM to commands requiring a locked DLL. For configurations with MEMC_FREQ_RATIO=2, program
		this to (tXMPDLL/2) and round it up to the next integer value. Present only in designs configured to support DDR4. Unit: Mult
		ples of 32 clocks.
		PSU_DDRC_DRAMTMG11_POST_MPSM_GAP_X32                                            0x6f

		tMPX_LH: This is the minimum CS_n Low hold time to CKE rising edge. For configurations with MEMC_FREQ_RATIO=2, program this t
		 RoundUp(tMPX_LH/2)+1. Present only in designs configured to support DDR4. Unit: clocks.
		PSU_DDRC_DRAMTMG11_T_MPX_LH                                                     0x7

		tMPX_S: Minimum time CS setup time to CKE. For configurations with MEMC_FREQ_RATIO=2, program this to (tMPX_S/2) and round it
		up to the next integer value. Present only in designs configured to support DDR4. Unit: Clocks.
		PSU_DDRC_DRAMTMG11_T_MPX_S                                                      0x1

		tCKMPE: Minimum valid clock requirement after MPSM entry. Present only in designs configured to support DDR4. Unit: Clocks. F
		r configurations with MEMC_FREQ_RATIO=2, divide the value calculated using the above equation by 2, and round it up to next i
		teger.
		PSU_DDRC_DRAMTMG11_T_CKMPE                                                      0xe

		SDRAM Timing Register 11
		(OFFSET, MASK, VALUE)      (0XFD07012C, 0x7F1F031FU ,0x6F07010EU)  
		RegMask = (DDRC_DRAMTMG11_POST_MPSM_GAP_X32_MASK | DDRC_DRAMTMG11_T_MPX_LH_MASK | DDRC_DRAMTMG11_T_MPX_S_MASK | DDRC_DRAMTMG11_T_CKMPE_MASK |  0 );

		RegVal = ((0x0000006FU << DDRC_DRAMTMG11_POST_MPSM_GAP_X32_SHIFT
			| 0x00000007U << DDRC_DRAMTMG11_T_MPX_LH_SHIFT
			| 0x00000001U << DDRC_DRAMTMG11_T_MPX_S_SHIFT
			| 0x0000000EU << DDRC_DRAMTMG11_T_CKMPE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG11_OFFSET ,0x7F1F031FU ,0x6F07010EU);
	/*############################################################################################################################ */

		/*Register : DRAMTMG12 @ 0XFD070130</p>

		tCMDCKE: Delay from valid command to CKE input LOW. Set this to the larger of tESCKE or tCMDCKE For configurations with MEMC_
		REQ_RATIO=2, program this to (max(tESCKE, tCMDCKE)/2) and round it up to next integer value.
		PSU_DDRC_DRAMTMG12_T_CMDCKE                                                     0x2

		tCKEHCMD: Valid command requirement after CKE input HIGH. For configurations with MEMC_FREQ_RATIO=2, program this to (tCKEHCM
		/2) and round it up to next integer value.
		PSU_DDRC_DRAMTMG12_T_CKEHCMD                                                    0x6

		tMRD_PDA: This is the Mode Register Set command cycle time in PDA mode. For configurations with MEMC_FREQ_RATIO=2, program th
		s to (tMRD_PDA/2) and round it up to next integer value.
		PSU_DDRC_DRAMTMG12_T_MRD_PDA                                                    0x8

		SDRAM Timing Register 12
		(OFFSET, MASK, VALUE)      (0XFD070130, 0x00030F1FU ,0x00020608U)  
		RegMask = (DDRC_DRAMTMG12_T_CMDCKE_MASK | DDRC_DRAMTMG12_T_CKEHCMD_MASK | DDRC_DRAMTMG12_T_MRD_PDA_MASK |  0 );

		RegVal = ((0x00000002U << DDRC_DRAMTMG12_T_CMDCKE_SHIFT
			| 0x00000006U << DDRC_DRAMTMG12_T_CKEHCMD_SHIFT
			| 0x00000008U << DDRC_DRAMTMG12_T_MRD_PDA_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DRAMTMG12_OFFSET ,0x00030F1FU ,0x00020608U);
	/*############################################################################################################################ */

		/*Register : ZQCTL0 @ 0XFD070180</p>

		- 1 - Disable uMCTL2 generation of ZQCS/MPC(ZQ calibration) command. Register DBGCMD.zq_calib_short can be used instead to is
		ue ZQ calibration request from APB module. - 0 - Internally generate ZQCS/MPC(ZQ calibration) commands based on ZQCTL1.t_zq_s
		ort_interval_x1024. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_ZQCTL0_DIS_AUTO_ZQ                                                     0x1

		- 1 - Disable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Powerdown exit. Only applicable when run in DDR3
		or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. - 0 - Enable issuing of ZQCL/MPC(ZQ calibration) command at Self-Refresh/SR-Power
		own exit. Only applicable when run in DDR3 or DDR4 or LPDDR2 or LPDDR3 or LPDDR4 mode. This is only present for designs suppo
		ting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_ZQCTL0_DIS_SRX_ZQCL                                                    0x0

		- 1 - Denotes that ZQ resistor is shared between ranks. Means ZQinit/ZQCL/ZQCS/MPC(ZQ calibration) commands are sent to one r
		nk at a time with tZQinit/tZQCL/tZQCS/tZQCAL/tZQLAT timing met between commands so that commands to different ranks do not ov
		rlap. - 0 - ZQ resistor is not shared. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_ZQCTL0_ZQ_RESISTOR_SHARED                                              0x0

		- 1 - Disable issuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. - 0 - Enable 
		ssuing of ZQCL command at Maximum Power Saving Mode exit. Only applicable when run in DDR4 mode. This is only present for des
		gns supporting DDR4 devices.
		PSU_DDRC_ZQCTL0_DIS_MPSMX_ZQCL                                                  0x0

		tZQoper for DDR3/DDR4, tZQCL for LPDDR2/LPDDR3, tZQCAL for LPDDR4: Number of cycles of NOP required after a ZQCL (ZQ calibrat
		on long)/MPC(ZQ Start) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2: DDR3/DDR4: program this to tZQo
		er/2 and round it up to the next integer value. LPDDR2/LPDDR3: program this to tZQCL/2 and round it up to the next integer va
		ue. LPDDR4: program this to tZQCAL/2 and round it up to the next integer value. Unit: Clock cycles. This is only present for 
		esigns supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_ZQCTL0_T_ZQ_LONG_NOP                                                   0x100

		tZQCS for DDR3/DD4/LPDDR2/LPDDR3, tZQLAT for LPDDR4: Number of cycles of NOP required after a ZQCS (ZQ calibration short)/MPC
		ZQ Latch) command is issued to SDRAM. For configurations with MEMC_FREQ_RATIO=2, program this to tZQCS/2 and round it up to t
		e next integer value. Unit: Clock cycles. This is only present for designs supporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devic
		s.
		PSU_DDRC_ZQCTL0_T_ZQ_SHORT_NOP                                                  0x40

		ZQ Control Register 0
		(OFFSET, MASK, VALUE)      (0XFD070180, 0xF7FF03FFU ,0x81000040U)  
		RegMask = (DDRC_ZQCTL0_DIS_AUTO_ZQ_MASK | DDRC_ZQCTL0_DIS_SRX_ZQCL_MASK | DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_MASK | DDRC_ZQCTL0_DIS_MPSMX_ZQCL_MASK | DDRC_ZQCTL0_T_ZQ_LONG_NOP_MASK | DDRC_ZQCTL0_T_ZQ_SHORT_NOP_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_ZQCTL0_DIS_AUTO_ZQ_SHIFT
			| 0x00000000U << DDRC_ZQCTL0_DIS_SRX_ZQCL_SHIFT
			| 0x00000000U << DDRC_ZQCTL0_ZQ_RESISTOR_SHARED_SHIFT
			| 0x00000000U << DDRC_ZQCTL0_DIS_MPSMX_ZQCL_SHIFT
			| 0x00000100U << DDRC_ZQCTL0_T_ZQ_LONG_NOP_SHIFT
			| 0x00000040U << DDRC_ZQCTL0_T_ZQ_SHORT_NOP_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ZQCTL0_OFFSET ,0xF7FF03FFU ,0x81000040U);
	/*############################################################################################################################ */

		/*Register : ZQCTL1 @ 0XFD070184</p>

		tZQReset: Number of cycles of NOP required after a ZQReset (ZQ calibration Reset) command is issued to SDRAM. For configurati
		ns with MEMC_FREQ_RATIO=2, program this to tZQReset/2 and round it up to the next integer value. Unit: Clock cycles. This is 
		nly present for designs supporting LPDDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_ZQCTL1_T_ZQ_RESET_NOP                                                  0x20

		Average interval to wait between automatically issuing ZQCS (ZQ calibration short)/MPC(ZQ calibration) commands to DDR3/DDR4/
		PDDR2/LPDDR3/LPDDR4 devices. Meaningless, if ZQCTL0.dis_auto_zq=1. Unit: 1024 clock cycles. This is only present for designs 
		upporting DDR3/DDR4 or LPDDR2/LPDDR3/LPDDR4 devices.
		PSU_DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024                                       0x19707

		ZQ Control Register 1
		(OFFSET, MASK, VALUE)      (0XFD070184, 0x3FFFFFFFU ,0x02019707U)  
		RegMask = (DDRC_ZQCTL1_T_ZQ_RESET_NOP_MASK | DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_MASK |  0 );

		RegVal = ((0x00000020U << DDRC_ZQCTL1_T_ZQ_RESET_NOP_SHIFT
			| 0x00019707U << DDRC_ZQCTL1_T_ZQ_SHORT_INTERVAL_X1024_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ZQCTL1_OFFSET ,0x3FFFFFFFU ,0x02019707U);
	/*############################################################################################################################ */

		/*Register : DFITMG0 @ 0XFD070190</p>

		Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.
		PSU_DDRC_DFITMG0_DFI_T_CTRL_DELAY                                               0x4

		Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
		fer to PHY specification for correct value.
		PSU_DDRC_DFITMG0_DFI_RDDATA_USE_SDR                                             0x1

		Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
		 latency through the RDIMM. Unit: Clocks
		PSU_DDRC_DFITMG0_DFI_T_RDDATA_EN                                                0xb

		Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
		e.
		PSU_DDRC_DFITMG0_DFI_WRDATA_USE_SDR                                             0x1

		Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
		te, max supported value is 8. Unit: Clocks
		PSU_DDRC_DFITMG0_DFI_TPHY_WRDATA                                                0x2

		Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
		rough the RDIMM.
		PSU_DDRC_DFITMG0_DFI_TPHY_WRLAT                                                 0xb

		DFI Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD070190, 0x1FBFBF3FU ,0x048B820BU)  
		RegMask = (DDRC_DFITMG0_DFI_T_CTRL_DELAY_MASK | DDRC_DFITMG0_DFI_RDDATA_USE_SDR_MASK | DDRC_DFITMG0_DFI_T_RDDATA_EN_MASK | DDRC_DFITMG0_DFI_WRDATA_USE_SDR_MASK | DDRC_DFITMG0_DFI_TPHY_WRDATA_MASK | DDRC_DFITMG0_DFI_TPHY_WRLAT_MASK |  0 );

		RegVal = ((0x00000004U << DDRC_DFITMG0_DFI_T_CTRL_DELAY_SHIFT
			| 0x00000001U << DDRC_DFITMG0_DFI_RDDATA_USE_SDR_SHIFT
			| 0x0000000BU << DDRC_DFITMG0_DFI_T_RDDATA_EN_SHIFT
			| 0x00000001U << DDRC_DFITMG0_DFI_WRDATA_USE_SDR_SHIFT
			| 0x00000002U << DDRC_DFITMG0_DFI_TPHY_WRDATA_SHIFT
			| 0x0000000BU << DDRC_DFITMG0_DFI_TPHY_WRLAT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DFITMG0_OFFSET ,0x1FBFBF3FU ,0x048B820BU);
	/*############################################################################################################################ */

		/*Register : DFITMG1 @ 0XFD070194</p>

		Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated command is driven. 
		his field is used for CAL mode, should be set to '0' or the value which matches the CAL mode register setting in the DRAM. If
		the PHY can add the latency for CAL mode, this should be set to '0'. Valid Range: 0, 3, 4, 5, 6, and 8
		PSU_DDRC_DFITMG1_DFI_T_CMD_LAT                                                  0x0

		Specifies the number of DFI PHY clocks between when the dfi_cs signal is asserted and when the associated dfi_parity_in signa
		 is driven.
		PSU_DDRC_DFITMG1_DFI_T_PARIN_LAT                                                0x0

		Specifies the number of DFI clocks between when the dfi_wrdata_en signal is asserted and when the corresponding write data tr
		nsfer is completed on the DRAM bus. This corresponds to the DFI timing parameter twrdata_delay. Refer to PHY specification fo
		 correct value. For DFI 3.0 PHY, set to twrdata_delay, a new timing parameter introduced in DFI 3.0. For DFI 2.1 PHY, set to 
		phy_wrdata + (delay of DFI write data to the DRAM). Value to be programmed is in terms of DFI clocks, not PHY clocks. In FREQ
		RATIO=2, divide PHY's value by 2 and round up to next integer. If using DFITMG0.dfi_wrdata_use_sdr=1, add 1 to the value. Uni
		: Clocks
		PSU_DDRC_DFITMG1_DFI_T_WRDATA_DELAY                                             0x3

		Specifies the number of DFI clock cycles from the assertion of the dfi_dram_clk_disable signal on the DFI until the clock to 
		he DRAM memory devices, at the PHY-DRAM boundary, maintains a low value. If the DFI clock and the memory clock are not phase 
		ligned, this timing parameter should be rounded up to the next integer value.
		PSU_DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE                                         0x3

		Specifies the number of DFI clock cycles from the de-assertion of the dfi_dram_clk_disable signal on the DFI until the first 
		alid rising edge of the clock to the DRAM memory devices, at the PHY-DRAM boundary. If the DFI clock and the memory clock are
		not phase aligned, this timing parameter should be rounded up to the next integer value.
		PSU_DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE                                          0x4

		DFI Timing Register 1
		(OFFSET, MASK, VALUE)      (0XFD070194, 0xF31F0F0FU ,0x00030304U)  
		RegMask = (DDRC_DFITMG1_DFI_T_CMD_LAT_MASK | DDRC_DFITMG1_DFI_T_PARIN_LAT_MASK | DDRC_DFITMG1_DFI_T_WRDATA_DELAY_MASK | DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_MASK | DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_DFITMG1_DFI_T_CMD_LAT_SHIFT
			| 0x00000000U << DDRC_DFITMG1_DFI_T_PARIN_LAT_SHIFT
			| 0x00000003U << DDRC_DFITMG1_DFI_T_WRDATA_DELAY_SHIFT
			| 0x00000003U << DDRC_DFITMG1_DFI_T_DRAM_CLK_DISABLE_SHIFT
			| 0x00000004U << DDRC_DFITMG1_DFI_T_DRAM_CLK_ENABLE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DFITMG1_OFFSET ,0xF31F0F0FU ,0x00030304U);
	/*############################################################################################################################ */

		/*Register : DFILPCFG0 @ 0XFD070198</p>

		Setting for DFI's tlp_resp time. Same value is used for both Power Down, Self Refresh, Deep Power Down and Maximum Power Savi
		g modes. DFI 2.1 specification onwards, recommends using a fixed value of 7 always.
		PSU_DDRC_DFILPCFG0_DFI_TLP_RESP                                                 0x7

		Value to drive on dfi_lp_wakeup signal when Deep Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16
		cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7
		- 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 
		31072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting mDDR or LPDDR2/LPDDR3 device
		.
		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD                                            0x0

		Enables DFI Low Power interface handshaking during Deep Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled This is only pres
		nt for designs supporting mDDR or LPDDR2/LPDDR3 devices.
		PSU_DDRC_DFILPCFG0_DFI_LP_EN_DPD                                                0x0

		Value to drive on dfi_lp_wakeup signal when Self Refresh mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cy
		les - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 
		048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 131
		72 cycles - 0xE - 262144 cycles - 0xF - Unlimited
		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR                                             0x0

		Enables DFI Low Power interface handshaking during Self Refresh Entry/Exit. - 0 - Disabled - 1 - Enabled
		PSU_DDRC_DFILPCFG0_DFI_LP_EN_SR                                                 0x1

		Value to drive on dfi_lp_wakeup signal when Power Down mode is entered. Determines the DFI's tlp_wakeup time: - 0x0 - 16 cycl
		s - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles - 0x7 - 20
		8 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0xD - 13107
		 cycles - 0xE - 262144 cycles - 0xF - Unlimited
		PSU_DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD                                             0x0

		Enables DFI Low Power interface handshaking during Power Down Entry/Exit. - 0 - Disabled - 1 - Enabled
		PSU_DDRC_DFILPCFG0_DFI_LP_EN_PD                                                 0x1

		DFI Low Power Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD070198, 0x0FF1F1F1U ,0x07000101U)  
		RegMask = (DDRC_DFILPCFG0_DFI_TLP_RESP_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_DPD_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_MASK | DDRC_DFILPCFG0_DFI_LP_EN_SR_MASK | DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_MASK | DDRC_DFILPCFG0_DFI_LP_EN_PD_MASK |  0 );

		RegVal = ((0x00000007U << DDRC_DFILPCFG0_DFI_TLP_RESP_SHIFT
			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_DPD_SHIFT
			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_EN_DPD_SHIFT
			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_SR_SHIFT
			| 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_SR_SHIFT
			| 0x00000000U << DDRC_DFILPCFG0_DFI_LP_WAKEUP_PD_SHIFT
			| 0x00000001U << DDRC_DFILPCFG0_DFI_LP_EN_PD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DFILPCFG0_OFFSET ,0x0FF1F1F1U ,0x07000101U);
	/*############################################################################################################################ */

		/*Register : DFILPCFG1 @ 0XFD07019C</p>

		Value to drive on dfi_lp_wakeup signal when Maximum Power Saving Mode is entered. Determines the DFI's tlp_wakeup time: - 0x0
		- 16 cycles - 0x1 - 32 cycles - 0x2 - 64 cycles - 0x3 - 128 cycles - 0x4 - 256 cycles - 0x5 - 512 cycles - 0x6 - 1024 cycles 
		 0x7 - 2048 cycles - 0x8 - 4096 cycles - 0x9 - 8192 cycles - 0xA - 16384 cycles - 0xB - 32768 cycles - 0xC - 65536 cycles - 0
		D - 131072 cycles - 0xE - 262144 cycles - 0xF - Unlimited This is only present for designs supporting DDR4 devices.
		PSU_DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM                                           0x2

		Enables DFI Low Power interface handshaking during Maximum Power Saving Mode Entry/Exit. - 0 - Disabled - 1 - Enabled This is
		only present for designs supporting DDR4 devices.
		PSU_DDRC_DFILPCFG1_DFI_LP_EN_MPSM                                               0x1

		DFI Low Power Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD07019C, 0x000000F1U ,0x00000021U)  
		RegMask = (DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_MASK | DDRC_DFILPCFG1_DFI_LP_EN_MPSM_MASK |  0 );

		RegVal = ((0x00000002U << DDRC_DFILPCFG1_DFI_LP_WAKEUP_MPSM_SHIFT
			| 0x00000001U << DDRC_DFILPCFG1_DFI_LP_EN_MPSM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DFILPCFG1_OFFSET ,0x000000F1U ,0x00000021U);
	/*############################################################################################################################ */

		/*Register : DFIUPD1 @ 0XFD0701A4</p>

		This is the minimum amount of time between uMCTL2 initiated DFI update requests (which is executed whenever the uMCTL2 is idl
		). Set this number higher to reduce the frequency of update requests, which can have a small impact on the latency of the fir
		t read request when the uMCTL2 is idle. Unit: 1024 clocks
		PSU_DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024                               0x41

		This is the maximum amount of time between uMCTL2 initiated DFI update requests. This timer resets with each update request; 
		hen the timer expires dfi_ctrlupd_req is sent and traffic is blocked until the dfi_ctrlupd_ackx is received. PHY can use this
		idle time to recalibrate the delay lines to the DLLs. The DFI controller update is also used to reset PHY FIFO pointers in ca
		e of data capture errors. Updates are required to maintain calibration over PVT, but frequent updates may impact performance.
		Note: Value programmed for DFIUPD1.dfi_t_ctrlupd_interval_max_x1024 must be greater than DFIUPD1.dfi_t_ctrlupd_interval_min_x
		024. Unit: 1024 clocks
		PSU_DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024                               0xe2

		DFI Update Register 1
		(OFFSET, MASK, VALUE)      (0XFD0701A4, 0x00FF00FFU ,0x004100E2U)  
		RegMask = (DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_MASK | DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_MASK |  0 );

		RegVal = ((0x00000041U << DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MIN_X1024_SHIFT
			| 0x000000E2U << DDRC_DFIUPD1_DFI_T_CTRLUPD_INTERVAL_MAX_X1024_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DFIUPD1_OFFSET ,0x00FF00FFU ,0x004100E2U);
	/*############################################################################################################################ */

		/*Register : DFIMISC @ 0XFD0701B0</p>

		Defines polarity of dfi_wrdata_cs and dfi_rddata_cs signals. - 0: Signals are active low - 1: Signals are active high
		PSU_DDRC_DFIMISC_DFI_DATA_CS_POLARITY                                           0x0

		DBI implemented in DDRC or PHY. - 0 - DDRC implements DBI functionality. - 1 - PHY implements DBI functionality. Present only
		in designs configured to support DDR4 and LPDDR4.
		PSU_DDRC_DFIMISC_PHY_DBI_MODE                                                   0x0

		PHY initialization complete enable signal. When asserted the dfi_init_complete signal can be used to trigger SDRAM initialisa
		ion
		PSU_DDRC_DFIMISC_DFI_INIT_COMPLETE_EN                                           0x0

		DFI Miscellaneous Control Register
		(OFFSET, MASK, VALUE)      (0XFD0701B0, 0x00000007U ,0x00000000U)  
		RegMask = (DDRC_DFIMISC_DFI_DATA_CS_POLARITY_MASK | DDRC_DFIMISC_PHY_DBI_MODE_MASK | DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_DFIMISC_DFI_DATA_CS_POLARITY_SHIFT
			| 0x00000000U << DDRC_DFIMISC_PHY_DBI_MODE_SHIFT
			| 0x00000000U << DDRC_DFIMISC_DFI_INIT_COMPLETE_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DFIMISC_OFFSET ,0x00000007U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DFITMG2 @ 0XFD0701B4</p>

		>Number of clocks between when a read command is sent on the DFI control interface and when the associated dfi_rddata_cs sign
		l is asserted. This corresponds to the DFI timing parameter tphy_rdcslat. Refer to PHY specification for correct value.
		PSU_DDRC_DFITMG2_DFI_TPHY_RDCSLAT                                               0x9

		Number of clocks between when a write command is sent on the DFI control interface and when the associated dfi_wrdata_cs sign
		l is asserted. This corresponds to the DFI timing parameter tphy_wrcslat. Refer to PHY specification for correct value.
		PSU_DDRC_DFITMG2_DFI_TPHY_WRCSLAT                                               0x6

		DFI Timing Register 2
		(OFFSET, MASK, VALUE)      (0XFD0701B4, 0x00003F3FU ,0x00000906U)  
		RegMask = (DDRC_DFITMG2_DFI_TPHY_RDCSLAT_MASK | DDRC_DFITMG2_DFI_TPHY_WRCSLAT_MASK |  0 );

		RegVal = ((0x00000009U << DDRC_DFITMG2_DFI_TPHY_RDCSLAT_SHIFT
			| 0x00000006U << DDRC_DFITMG2_DFI_TPHY_WRCSLAT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DFITMG2_OFFSET ,0x00003F3FU ,0x00000906U);
	/*############################################################################################################################ */

		/*Register : DBICTL @ 0XFD0701C0</p>

		Read DBI enable signal in DDRC. - 0 - Read DBI is disabled. - 1 - Read DBI is enabled. This signal must be set the same value
		as DRAM's mode register. - DDR4: MR5 bit A12. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[6]
		PSU_DDRC_DBICTL_RD_DBI_EN                                                       0x0

		Write DBI enable signal in DDRC. - 0 - Write DBI is disabled. - 1 - Write DBI is enabled. This signal must be set the same va
		ue as DRAM's mode register. - DDR4: MR5 bit A11. When x4 devices are used, this signal must be set to 0. - LPDDR4: MR3[7]
		PSU_DDRC_DBICTL_WR_DBI_EN                                                       0x0

		DM enable signal in DDRC. - 0 - DM is disabled. - 1 - DM is enabled. This signal must be set the same logical value as DRAM's
		mode register. - DDR4: Set this to same value as MR5 bit A10. When x4 devices are used, this signal must be set to 0. - LPDDR
		: Set this to inverted value of MR13[5] which is opposite polarity from this signal
		PSU_DDRC_DBICTL_DM_EN                                                           0x1

		DM/DBI Control Register
		(OFFSET, MASK, VALUE)      (0XFD0701C0, 0x00000007U ,0x00000001U)  
		RegMask = (DDRC_DBICTL_RD_DBI_EN_MASK | DDRC_DBICTL_WR_DBI_EN_MASK | DDRC_DBICTL_DM_EN_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_DBICTL_RD_DBI_EN_SHIFT
			| 0x00000000U << DDRC_DBICTL_WR_DBI_EN_SHIFT
			| 0x00000001U << DDRC_DBICTL_DM_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DBICTL_OFFSET ,0x00000007U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : ADDRMAP0 @ 0XFD070200</p>

		Selects the HIF address bit used as rank address bit 0. Valid Range: 0 to 27, and 31 Internal Base: 6 The selected HIF addres
		 bit is determined by adding the internal base to the value of this field. If set to 31, rank address bit 0 is set to 0.
		PSU_DDRC_ADDRMAP0_ADDRMAP_CS_BIT0                                               0x1f

		Address Map Register 0
		(OFFSET, MASK, VALUE)      (0XFD070200, 0x0000001FU ,0x0000001FU)  
		RegMask = (DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_MASK |  0 );

		RegVal = ((0x0000001FU << DDRC_ADDRMAP0_ADDRMAP_CS_BIT0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP0_OFFSET ,0x0000001FU ,0x0000001FU);
	/*############################################################################################################################ */

		/*Register : ADDRMAP1 @ 0XFD070204</p>

		Selects the HIF address bit used as bank address bit 2. Valid Range: 0 to 29 and 31 Internal Base: 4 The selected HIF address
		bit is determined by adding the internal base to the value of this field. If set to 31, bank address bit 2 is set to 0.
		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B2                                               0x1f

		Selects the HIF address bits used as bank address bit 1. Valid Range: 0 to 30 Internal Base: 3 The selected HIF address bit f
		r each of the bank address bits is determined by adding the internal base to the value of this field.
		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B1                                               0xa

		Selects the HIF address bits used as bank address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address bit f
		r each of the bank address bits is determined by adding the internal base to the value of this field.
		PSU_DDRC_ADDRMAP1_ADDRMAP_BANK_B0                                               0xa

		Address Map Register 1
		(OFFSET, MASK, VALUE)      (0XFD070204, 0x001F1F1FU ,0x001F0A0AU)  
		RegMask = (DDRC_ADDRMAP1_ADDRMAP_BANK_B2_MASK | DDRC_ADDRMAP1_ADDRMAP_BANK_B1_MASK | DDRC_ADDRMAP1_ADDRMAP_BANK_B0_MASK |  0 );

		RegVal = ((0x0000001FU << DDRC_ADDRMAP1_ADDRMAP_BANK_B2_SHIFT
			| 0x0000000AU << DDRC_ADDRMAP1_ADDRMAP_BANK_B1_SHIFT
			| 0x0000000AU << DDRC_ADDRMAP1_ADDRMAP_BANK_B0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP1_OFFSET ,0x001F1F1FU ,0x001F0A0AU);
	/*############################################################################################################################ */

		/*Register : ADDRMAP2 @ 0XFD070208</p>

		- Full bus width mode: Selects the HIF address bit used as column address bit 5. - Half bus width mode: Selects the HIF addre
		s bit used as column address bit 6. - Quarter bus width mode: Selects the HIF address bit used as column address bit 7 . Vali
		 Range: 0 to 7, and 15 Internal Base: 5 The selected HIF address bit is determined by adding the internal base to the value o
		 this field. If set to 15, this column address bit is set to 0.
		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B5                                                0x0

		- Full bus width mode: Selects the HIF address bit used as column address bit 4. - Half bus width mode: Selects the HIF addre
		s bit used as column address bit 5. - Quarter bus width mode: Selects the HIF address bit used as column address bit 6. Valid
		Range: 0 to 7, and 15 Internal Base: 4 The selected HIF address bit is determined by adding the internal base to the value of
		this field. If set to 15, this column address bit is set to 0.
		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B4                                                0x0

		- Full bus width mode: Selects the HIF address bit used as column address bit 3. - Half bus width mode: Selects the HIF addre
		s bit used as column address bit 4. - Quarter bus width mode: Selects the HIF address bit used as column address bit 5. Valid
		Range: 0 to 7 Internal Base: 3 The selected HIF address bit is determined by adding the internal base to the value of this fi
		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=16, it is required to program this to 0, hence register does not exist i
		 this case.
		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B3                                                0x0

		- Full bus width mode: Selects the HIF address bit used as column address bit 2. - Half bus width mode: Selects the HIF addre
		s bit used as column address bit 3. - Quarter bus width mode: Selects the HIF address bit used as column address bit 4. Valid
		Range: 0 to 7 Internal Base: 2 The selected HIF address bit is determined by adding the internal base to the value of this fi
		ld. Note, if UMCTL2_INCL_ARB=1 and MEMC_BURST_LENGTH=8 or 16, it is required to program this to 0.
		PSU_DDRC_ADDRMAP2_ADDRMAP_COL_B2                                                0x0

		Address Map Register 2
		(OFFSET, MASK, VALUE)      (0XFD070208, 0x0F0F0F0FU ,0x00000000U)  
		RegMask = (DDRC_ADDRMAP2_ADDRMAP_COL_B5_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B4_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B3_MASK | DDRC_ADDRMAP2_ADDRMAP_COL_B2_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B5_SHIFT
			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B4_SHIFT
			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B3_SHIFT
			| 0x00000000U << DDRC_ADDRMAP2_ADDRMAP_COL_B2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP2_OFFSET ,0x0F0F0F0FU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ADDRMAP3 @ 0XFD07020C</p>

		- Full bus width mode: Selects the HIF address bit used as column address bit 9. - Half bus width mode: Selects the HIF addre
		s bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: Selects the HIF address bit used as
		column address bit 13 (11 in LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 9 The selected HIF address bit i
		 determined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: 
		er JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source addr
		ss bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus an
		 hence column bit 10 is used.
		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B9                                                0x0

		- Full bus width mode: Selects the HIF address bit used as column address bit 8. - Half bus width mode: Selects the HIF addre
		s bit used as column address bit 9. - Quarter bus width mode: Selects the HIF address bit used as column address bit 11 (10 i
		 LPDDR2/LPDDR3 mode). Valid Range: 0 to 7, and 15 Internal Base: 8 The selected HIF address bit is determined by adding the i
		ternal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specif
		cation, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to col
		mn address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is use
		.
		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B8                                                0x0

		- Full bus width mode: Selects the HIF address bit used as column address bit 7. - Half bus width mode: Selects the HIF addre
		s bit used as column address bit 8. - Quarter bus width mode: Selects the HIF address bit used as column address bit 9. Valid
		Range: 0 to 7, and 15 Internal Base: 7 The selected HIF address bit is determined by adding the internal base to the value of
		this field. If set to 15, this column address bit is set to 0.
		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B7                                                0x0

		- Full bus width mode: Selects the HIF address bit used as column address bit 6. - Half bus width mode: Selects the HIF addre
		s bit used as column address bit 7. - Quarter bus width mode: Selects the HIF address bit used as column address bit 8. Valid
		Range: 0 to 7, and 15 Internal Base: 6 The selected HIF address bit is determined by adding the internal base to the value of
		this field. If set to 15, this column address bit is set to 0.
		PSU_DDRC_ADDRMAP3_ADDRMAP_COL_B6                                                0x0

		Address Map Register 3
		(OFFSET, MASK, VALUE)      (0XFD07020C, 0x0F0F0F0FU ,0x00000000U)  
		RegMask = (DDRC_ADDRMAP3_ADDRMAP_COL_B9_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B8_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B7_MASK | DDRC_ADDRMAP3_ADDRMAP_COL_B6_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B9_SHIFT
			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B8_SHIFT
			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B7_SHIFT
			| 0x00000000U << DDRC_ADDRMAP3_ADDRMAP_COL_B6_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP3_OFFSET ,0x0F0F0F0FU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ADDRMAP4 @ 0XFD070210</p>

		- Full bus width mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Half bus width
		mode: Unused. To make it unused, this should be tied to 4'hF. - Quarter bus width mode: Unused. To make it unused, this must 
		e tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 11 The selected HIF address bit is determined by adding the intern
		l base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per JEDEC DDR2/3/mDDR specificati
		n, column address bit 10 is reserved for indicating auto-precharge, and hence no source address bit can be mapped to column a
		dress bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and hence column bit 10 is used.
		PSU_DDRC_ADDRMAP4_ADDRMAP_COL_B11                                               0xf

		- Full bus width mode: Selects the HIF address bit used as column address bit 11 (10 in LPDDR2/LPDDR3 mode). - Half bus width
		mode: Selects the HIF address bit used as column address bit 13 (11 in LPDDR2/LPDDR3 mode). - Quarter bus width mode: UNUSED.
		To make it unused, this must be tied to 4'hF. Valid Range: 0 to 7, and 15 Internal Base: 10 The selected HIF address bit is d
		termined by adding the internal base to the value of this field. If set to 15, this column address bit is set to 0. Note: Per
		JEDEC DDR2/3/mDDR specification, column address bit 10 is reserved for indicating auto-precharge, and hence no source address
		bit can be mapped to column address bit 10. In LPDDR2/LPDDR3, there is a dedicated bit for auto-precharge in the CA bus and h
		nce column bit 10 is used.
		PSU_DDRC_ADDRMAP4_ADDRMAP_COL_B10                                               0xf

		Address Map Register 4
		(OFFSET, MASK, VALUE)      (0XFD070210, 0x00000F0FU ,0x00000F0FU)  
		RegMask = (DDRC_ADDRMAP4_ADDRMAP_COL_B11_MASK | DDRC_ADDRMAP4_ADDRMAP_COL_B10_MASK |  0 );

		RegVal = ((0x0000000FU << DDRC_ADDRMAP4_ADDRMAP_COL_B11_SHIFT
			| 0x0000000FU << DDRC_ADDRMAP4_ADDRMAP_COL_B10_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP4_OFFSET ,0x00000F0FU ,0x00000F0FU);
	/*############################################################################################################################ */

		/*Register : ADDRMAP5 @ 0XFD070214</p>

		Selects the HIF address bit used as row address bit 11. Valid Range: 0 to 11, and 15 Internal Base: 17 The selected HIF addre
		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 11 is set to 0.
		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B11                                               0x8

		Selects the HIF address bits used as row address bits 2 to 10. Valid Range: 0 to 11, and 15 Internal Base: 8 (for row address
		bit 2), 9 (for row address bit 3), 10 (for row address bit 4) etc increasing to 16 (for row address bit 10) The selected HIF 
		ddress bit for each of the row address bits is determined by adding the internal base to the value of this field. When value 
		5 is used the values of row address bits 2 to 10 are defined by registers ADDRMAP9, ADDRMAP10, ADDRMAP11.
		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10                                             0xf

		Selects the HIF address bits used as row address bit 1. Valid Range: 0 to 11 Internal Base: 7 The selected HIF address bit fo
		 each of the row address bits is determined by adding the internal base to the value of this field.
		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B1                                                0x8

		Selects the HIF address bits used as row address bit 0. Valid Range: 0 to 11 Internal Base: 6 The selected HIF address bit fo
		 each of the row address bits is determined by adding the internal base to the value of this field.
		PSU_DDRC_ADDRMAP5_ADDRMAP_ROW_B0                                                0x8

		Address Map Register 5
		(OFFSET, MASK, VALUE)      (0XFD070214, 0x0F0F0F0FU ,0x080F0808U)  
		RegMask = (DDRC_ADDRMAP5_ADDRMAP_ROW_B11_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B1_MASK | DDRC_ADDRMAP5_ADDRMAP_ROW_B0_MASK |  0 );

		RegVal = ((0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B11_SHIFT
			| 0x0000000FU << DDRC_ADDRMAP5_ADDRMAP_ROW_B2_10_SHIFT
			| 0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B1_SHIFT
			| 0x00000008U << DDRC_ADDRMAP5_ADDRMAP_ROW_B0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP5_OFFSET ,0x0F0F0F0FU ,0x080F0808U);
	/*############################################################################################################################ */

		/*Register : ADDRMAP6 @ 0XFD070218</p>

		Set this to 1 if there is an LPDDR3 SDRAM 6Gb or 12Gb device in use. - 1 - LPDDR3 SDRAM 6Gb/12Gb device in use. Every address
		having row[14:13]==2'b11 is considered as invalid - 0 - non-LPDDR3 6Gb/12Gb device in use. All addresses are valid Present on
		y in designs configured to support LPDDR3.
		PSU_DDRC_ADDRMAP6_LPDDR3_6GB_12GB                                               0x0

		Selects the HIF address bit used as row address bit 15. Valid Range: 0 to 11, and 15 Internal Base: 21 The selected HIF addre
		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 15 is set to 0.
		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B15                                               0xf

		Selects the HIF address bit used as row address bit 14. Valid Range: 0 to 11, and 15 Internal Base: 20 The selected HIF addre
		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 14 is set to 0.
		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B14                                               0x8

		Selects the HIF address bit used as row address bit 13. Valid Range: 0 to 11, and 15 Internal Base: 19 The selected HIF addre
		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 13 is set to 0.
		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B13                                               0x8

		Selects the HIF address bit used as row address bit 12. Valid Range: 0 to 11, and 15 Internal Base: 18 The selected HIF addre
		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 12 is set to 0.
		PSU_DDRC_ADDRMAP6_ADDRMAP_ROW_B12                                               0x8

		Address Map Register 6
		(OFFSET, MASK, VALUE)      (0XFD070218, 0x8F0F0F0FU ,0x0F080808U)  
		RegMask = (DDRC_ADDRMAP6_LPDDR3_6GB_12GB_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B15_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B14_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B13_MASK | DDRC_ADDRMAP6_ADDRMAP_ROW_B12_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_ADDRMAP6_LPDDR3_6GB_12GB_SHIFT
			| 0x0000000FU << DDRC_ADDRMAP6_ADDRMAP_ROW_B15_SHIFT
			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B14_SHIFT
			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B13_SHIFT
			| 0x00000008U << DDRC_ADDRMAP6_ADDRMAP_ROW_B12_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP6_OFFSET ,0x8F0F0F0FU ,0x0F080808U);
	/*############################################################################################################################ */

		/*Register : ADDRMAP7 @ 0XFD07021C</p>

		Selects the HIF address bit used as row address bit 17. Valid Range: 0 to 10, and 15 Internal Base: 23 The selected HIF addre
		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 17 is set to 0.
		PSU_DDRC_ADDRMAP7_ADDRMAP_ROW_B17                                               0xf

		Selects the HIF address bit used as row address bit 16. Valid Range: 0 to 11, and 15 Internal Base: 22 The selected HIF addre
		s bit is determined by adding the internal base to the value of this field. If set to 15, row address bit 16 is set to 0.
		PSU_DDRC_ADDRMAP7_ADDRMAP_ROW_B16                                               0xf

		Address Map Register 7
		(OFFSET, MASK, VALUE)      (0XFD07021C, 0x00000F0FU ,0x00000F0FU)  
		RegMask = (DDRC_ADDRMAP7_ADDRMAP_ROW_B17_MASK | DDRC_ADDRMAP7_ADDRMAP_ROW_B16_MASK |  0 );

		RegVal = ((0x0000000FU << DDRC_ADDRMAP7_ADDRMAP_ROW_B17_SHIFT
			| 0x0000000FU << DDRC_ADDRMAP7_ADDRMAP_ROW_B16_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP7_OFFSET ,0x00000F0FU ,0x00000F0FU);
	/*############################################################################################################################ */

		/*Register : ADDRMAP8 @ 0XFD070220</p>

		Selects the HIF address bits used as bank group address bit 1. Valid Range: 0 to 30, and 31 Internal Base: 3 The selected HIF
		address bit for each of the bank group address bits is determined by adding the internal base to the value of this field. If 
		et to 31, bank group address bit 1 is set to 0.
		PSU_DDRC_ADDRMAP8_ADDRMAP_BG_B1                                                 0x8

		Selects the HIF address bits used as bank group address bit 0. Valid Range: 0 to 30 Internal Base: 2 The selected HIF address
		bit for each of the bank group address bits is determined by adding the internal base to the value of this field.
		PSU_DDRC_ADDRMAP8_ADDRMAP_BG_B0                                                 0x8

		Address Map Register 8
		(OFFSET, MASK, VALUE)      (0XFD070220, 0x00001F1FU ,0x00000808U)  
		RegMask = (DDRC_ADDRMAP8_ADDRMAP_BG_B1_MASK | DDRC_ADDRMAP8_ADDRMAP_BG_B0_MASK |  0 );

		RegVal = ((0x00000008U << DDRC_ADDRMAP8_ADDRMAP_BG_B1_SHIFT
			| 0x00000008U << DDRC_ADDRMAP8_ADDRMAP_BG_B0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP8_OFFSET ,0x00001F1FU ,0x00000808U);
	/*############################################################################################################################ */

		/*Register : ADDRMAP9 @ 0XFD070224</p>

		Selects the HIF address bits used as row address bit 5. Valid Range: 0 to 11 Internal Base: 11 The selected HIF address bit f
		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B5                                                0x8

		Selects the HIF address bits used as row address bit 4. Valid Range: 0 to 11 Internal Base: 10 The selected HIF address bit f
		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B4                                                0x8

		Selects the HIF address bits used as row address bit 3. Valid Range: 0 to 11 Internal Base: 9 The selected HIF address bit fo
		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B3                                                0x8

		Selects the HIF address bits used as row address bit 2. Valid Range: 0 to 11 Internal Base: 8 The selected HIF address bit fo
		 each of the row address bits is determined by adding the internal base to the value of this field. This register field is us
		d only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP9_ADDRMAP_ROW_B2                                                0x8

		Address Map Register 9
		(OFFSET, MASK, VALUE)      (0XFD070224, 0x0F0F0F0FU ,0x08080808U)  
		RegMask = (DDRC_ADDRMAP9_ADDRMAP_ROW_B5_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B4_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B3_MASK | DDRC_ADDRMAP9_ADDRMAP_ROW_B2_MASK |  0 );

		RegVal = ((0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B5_SHIFT
			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B4_SHIFT
			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B3_SHIFT
			| 0x00000008U << DDRC_ADDRMAP9_ADDRMAP_ROW_B2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP9_OFFSET ,0x0F0F0F0FU ,0x08080808U);
	/*############################################################################################################################ */

		/*Register : ADDRMAP10 @ 0XFD070228</p>

		Selects the HIF address bits used as row address bit 9. Valid Range: 0 to 11 Internal Base: 15 The selected HIF address bit f
		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B9                                               0x8

		Selects the HIF address bits used as row address bit 8. Valid Range: 0 to 11 Internal Base: 14 The selected HIF address bit f
		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B8                                               0x8

		Selects the HIF address bits used as row address bit 7. Valid Range: 0 to 11 Internal Base: 13 The selected HIF address bit f
		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B7                                               0x8

		Selects the HIF address bits used as row address bit 6. Valid Range: 0 to 11 Internal Base: 12 The selected HIF address bit f
		r each of the row address bits is determined by adding the internal base to the value of this field. This register field is u
		ed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP10_ADDRMAP_ROW_B6                                               0x8

		Address Map Register 10
		(OFFSET, MASK, VALUE)      (0XFD070228, 0x0F0F0F0FU ,0x08080808U)  
		RegMask = (DDRC_ADDRMAP10_ADDRMAP_ROW_B9_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B8_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B7_MASK | DDRC_ADDRMAP10_ADDRMAP_ROW_B6_MASK |  0 );

		RegVal = ((0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B9_SHIFT
			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B8_SHIFT
			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B7_SHIFT
			| 0x00000008U << DDRC_ADDRMAP10_ADDRMAP_ROW_B6_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP10_OFFSET ,0x0F0F0F0FU ,0x08080808U);
	/*############################################################################################################################ */

		/*Register : ADDRMAP11 @ 0XFD07022C</p>

		Selects the HIF address bits used as row address bit 10. Valid Range: 0 to 11 Internal Base: 16 The selected HIF address bit 
		or each of the row address bits is determined by adding the internal base to the value of this field. This register field is 
		sed only when ADDRMAP5.addrmap_row_b2_10 is set to value 15.
		PSU_DDRC_ADDRMAP11_ADDRMAP_ROW_B10                                              0x8

		Address Map Register 11
		(OFFSET, MASK, VALUE)      (0XFD07022C, 0x0000000FU ,0x00000008U)  
		RegMask = (DDRC_ADDRMAP11_ADDRMAP_ROW_B10_MASK |  0 );

		RegVal = ((0x00000008U << DDRC_ADDRMAP11_ADDRMAP_ROW_B10_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ADDRMAP11_OFFSET ,0x0000000FU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : ODTCFG @ 0XFD070240</p>

		Cycles to hold ODT for a write command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x5 (DDR2-400/533/
		67), 0x6 (DDR2-800), 0x7 (DDR2-1066) - BL4: 0x3 (DDR2-400/533/667), 0x4 (DDR2-800), 0x5 (DDR2-1066) DDR3: - BL8: 0x6 DDR4: - 
		L8: 5 + WR_PREAMBLE + CRC_MODE WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) CRC_MODE = 0 (not CRC mode), 1 
		CRC mode) LPDDR3: - BL8: 7 + RU(tODTon(max)/tCK)
		PSU_DDRC_ODTCFG_WR_ODT_HOLD                                                     0x6

		The delay, in clock cycles, from issuing a write command to setting ODT values associated with that command. ODT setting must
		remain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CWL + AL - 3 (DDR2-400/533/
		67), CWL + AL - 4 (DDR2-800), CWL + AL - 5 (DDR2-1066) If (CWL + AL - 3 < 0), uMCTL2 does not support ODT for write operation
		 DDR3: - 0x0 DDR4: - DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) LPDDR3: - WL - 1 - RU(tODTon(max)/tCK))
		PSU_DDRC_ODTCFG_WR_ODT_DELAY                                                    0x0

		Cycles to hold ODT for a read command. The minimum supported value is 2. Recommended values: DDR2: - BL8: 0x6 (not DDR2-1066)
		 0x7 (DDR2-1066) - BL4: 0x4 (not DDR2-1066), 0x5 (DDR2-1066) DDR3: - BL8 - 0x6 DDR4: - BL8: 5 + RD_PREAMBLE RD_PREAMBLE = 1 (
		tCK write preamble), 2 (2tCK write preamble) LPDDR3: - BL8: 5 + RU(tDQSCK(max)/tCK) - RD(tDQSCK(min)/tCK) + RU(tODTon(max)/tC
		)
		PSU_DDRC_ODTCFG_RD_ODT_HOLD                                                     0x6

		The delay, in clock cycles, from issuing a read command to setting ODT values associated with that command. ODT setting must 
		emain constant for the entire time that DQS is driven by the uMCTL2. Recommended values: DDR2: - CL + AL - 4 (not DDR2-1066),
		CL + AL - 5 (DDR2-1066) If (CL + AL - 4 < 0), uMCTL2 does not support ODT for read operation. DDR3: - CL - CWL DDR4: - CL - C
		L - RD_PREAMBLE + WR_PREAMBLE + DFITMG1.dfi_t_cmd_lat (to adjust for CAL mode) WR_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK
		write preamble) RD_PREAMBLE = 1 (1tCK write preamble), 2 (2tCK write preamble) If (CL - CWL - RD_PREAMBLE + WR_PREAMBLE) < 0,
		uMCTL2 does not support ODT for read operation. LPDDR3: - RL + RD(tDQSCK(min)/tCK) - 1 - RU(tODTon(max)/tCK)
		PSU_DDRC_ODTCFG_RD_ODT_DELAY                                                    0x0

		ODT Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD070240, 0x0F1F0F7CU ,0x06000600U)  
		RegMask = (DDRC_ODTCFG_WR_ODT_HOLD_MASK | DDRC_ODTCFG_WR_ODT_DELAY_MASK | DDRC_ODTCFG_RD_ODT_HOLD_MASK | DDRC_ODTCFG_RD_ODT_DELAY_MASK |  0 );

		RegVal = ((0x00000006U << DDRC_ODTCFG_WR_ODT_HOLD_SHIFT
			| 0x00000000U << DDRC_ODTCFG_WR_ODT_DELAY_SHIFT
			| 0x00000006U << DDRC_ODTCFG_RD_ODT_HOLD_SHIFT
			| 0x00000000U << DDRC_ODTCFG_RD_ODT_DELAY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ODTCFG_OFFSET ,0x0F1F0F7CU ,0x06000600U);
	/*############################################################################################################################ */

		/*Register : ODTMAP @ 0XFD070244</p>

		Indicates which remote ODTs must be turned on during a read from rank 1. Each rank has a remote ODT (in the SDRAM) which can 
		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
		 etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks
		PSU_DDRC_ODTMAP_RANK1_RD_ODT                                                    0x0

		Indicates which remote ODTs must be turned on during a write to rank 1. Each rank has a remote ODT (in the SDRAM) which can b
		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
		etc. For each rank, set its bit to 1 to enable its ODT. Present only in configurations that have 2 or more ranks
		PSU_DDRC_ODTMAP_RANK1_WR_ODT                                                    0x0

		Indicates which remote ODTs must be turned on during a read from rank 0. Each rank has a remote ODT (in the SDRAM) which can 
		e turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB
		 etc. For each rank, set its bit to 1 to enable its ODT.
		PSU_DDRC_ODTMAP_RANK0_RD_ODT                                                    0x0

		Indicates which remote ODTs must be turned on during a write to rank 0. Each rank has a remote ODT (in the SDRAM) which can b
		 turned on by setting the appropriate bit here. Rank 0 is controlled by the LSB; rank 1 is controlled by bit next to the LSB,
		etc. For each rank, set its bit to 1 to enable its ODT.
		PSU_DDRC_ODTMAP_RANK0_WR_ODT                                                    0x1

		ODT/Rank Map Register
		(OFFSET, MASK, VALUE)      (0XFD070244, 0x00003333U ,0x00000001U)  
		RegMask = (DDRC_ODTMAP_RANK1_RD_ODT_MASK | DDRC_ODTMAP_RANK1_WR_ODT_MASK | DDRC_ODTMAP_RANK0_RD_ODT_MASK | DDRC_ODTMAP_RANK0_WR_ODT_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_ODTMAP_RANK1_RD_ODT_SHIFT
			| 0x00000000U << DDRC_ODTMAP_RANK1_WR_ODT_SHIFT
			| 0x00000000U << DDRC_ODTMAP_RANK0_RD_ODT_SHIFT
			| 0x00000001U << DDRC_ODTMAP_RANK0_WR_ODT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_ODTMAP_OFFSET ,0x00003333U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : SCHED @ 0XFD070250</p>

		When the preferred transaction store is empty for these many clock cycles, switch to the alternate transaction store if it is
		non-empty. The read transaction store (both high and low priority) is the default preferred transaction store and the write t
		ansaction store is the alternative store. When prefer write over read is set this is reversed. 0x0 is a legal value for this 
		egister. When set to 0x0, the transaction store switching will happen immediately when the switching conditions become true. 
		OR PERFORMANCE ONLY
		PSU_DDRC_SCHED_RDWR_IDLE_GAP                                                    0x1

		UNUSED
		PSU_DDRC_SCHED_GO2CRITICAL_HYSTERESIS                                           0x0

		Number of entries in the low priority transaction store is this value + 1. (MEMC_NO_OF_ENTRY - (SCHED.lpr_num_entries + 1)) i
		 the number of entries available for the high priority transaction store. Setting this to maximum value allocates all entries
		to low priority transaction store. Setting this to 0 allocates 1 entry to low priority transaction store and the rest to high
		priority transaction store. Note: In ECC configurations, the numbers of write and low priority read credits issued is one les
		 than in the non-ECC case. One entry each is reserved in the write and low-priority read CAMs for storing the RMW requests ar
		sing out of single bit error correction RMW operation.
		PSU_DDRC_SCHED_LPR_NUM_ENTRIES                                                  0x20

		If true, bank is kept open only while there are page hit transactions available in the CAM to that bank. The last read or wri
		e command in the CAM with a bank and page hit will be executed with auto-precharge if SCHED1.pageclose_timer=0. Even if this 
		egister set to 1 and SCHED1.pageclose_timer is set to 0, explicit precharge (and not auto-precharge) may be issued in some ca
		es where there is a mode switch between Write and Read or between LPR and HPR. The Read and Write commands that are executed 
		s part of the ECC scrub requests are also executed without auto-precharge. If false, the bank remains open until there is a n
		ed to close it (to open a different page, or for page timeout or refresh timeout) - also known as open page policy. The open 
		age policy can be overridden by setting the per-command-autopre bit on the HIF interface (hif_cmd_autopre). The pageclose fea
		ure provids a midway between Open and Close page policies. FOR PERFORMANCE ONLY.
		PSU_DDRC_SCHED_PAGECLOSE                                                        0x0

		If set then the bank selector prefers writes over reads. FOR DEBUG ONLY.
		PSU_DDRC_SCHED_PREFER_WRITE                                                     0x0

		Active low signal. When asserted ('0'), all incoming transactions are forced to low priority. This implies that all High Prio
		ity Read (HPR) and Variable Priority Read commands (VPR) will be treated as Low Priority Read (LPR) commands. On the write si
		e, all Variable Priority Write (VPW) commands will be treated as Normal Priority Write (NPW) commands. Forcing the incoming t
		ansactions to low priority implicitly turns off Bypass path for read commands. FOR PERFORMANCE ONLY.
		PSU_DDRC_SCHED_FORCE_LOW_PRI_N                                                  0x1

		Scheduler Control Register
		(OFFSET, MASK, VALUE)      (0XFD070250, 0x7FFF3F07U ,0x01002001U)  
		RegMask = (DDRC_SCHED_RDWR_IDLE_GAP_MASK | DDRC_SCHED_GO2CRITICAL_HYSTERESIS_MASK | DDRC_SCHED_LPR_NUM_ENTRIES_MASK | DDRC_SCHED_PAGECLOSE_MASK | DDRC_SCHED_PREFER_WRITE_MASK | DDRC_SCHED_FORCE_LOW_PRI_N_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_SCHED_RDWR_IDLE_GAP_SHIFT
			| 0x00000000U << DDRC_SCHED_GO2CRITICAL_HYSTERESIS_SHIFT
			| 0x00000020U << DDRC_SCHED_LPR_NUM_ENTRIES_SHIFT
			| 0x00000000U << DDRC_SCHED_PAGECLOSE_SHIFT
			| 0x00000000U << DDRC_SCHED_PREFER_WRITE_SHIFT
			| 0x00000001U << DDRC_SCHED_FORCE_LOW_PRI_N_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_SCHED_OFFSET ,0x7FFF3F07U ,0x01002001U);
	/*############################################################################################################################ */

		/*Register : PERFLPR1 @ 0XFD070264</p>

		Number of transactions that are serviced once the LPR queue goes critical is the smaller of: - (a) This number - (b) Number o
		 transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.
		PSU_DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH                                           0x8

		Number of clocks that the LPR queue can be starved before it goes critical. The minimum valid functional value for this regis
		er is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not
		be disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.
		PSU_DDRC_PERFLPR1_LPR_MAX_STARVE                                                0x40

		Low Priority Read CAM Register 1
		(OFFSET, MASK, VALUE)      (0XFD070264, 0xFF00FFFFU ,0x08000040U)  
		RegMask = (DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_MASK | DDRC_PERFLPR1_LPR_MAX_STARVE_MASK |  0 );

		RegVal = ((0x00000008U << DDRC_PERFLPR1_LPR_XACT_RUN_LENGTH_SHIFT
			| 0x00000040U << DDRC_PERFLPR1_LPR_MAX_STARVE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PERFLPR1_OFFSET ,0xFF00FFFFU ,0x08000040U);
	/*############################################################################################################################ */

		/*Register : PERFWR1 @ 0XFD07026C</p>

		Number of transactions that are serviced once the WR queue goes critical is the smaller of: - (a) This number - (b) Number of
		transactions available. Unit: Transaction. FOR PERFORMANCE ONLY.
		PSU_DDRC_PERFWR1_W_XACT_RUN_LENGTH                                              0x8

		Number of clocks that the WR queue can be starved before it goes critical. The minimum valid functional value for this regist
		r is 0x1. Programming it to 0x0 will disable the starvation functionality; during normal operation, this function should not 
		e disabled as it will cause excessive latencies. Unit: Clock cycles. FOR PERFORMANCE ONLY.
		PSU_DDRC_PERFWR1_W_MAX_STARVE                                                   0x40

		Write CAM Register 1
		(OFFSET, MASK, VALUE)      (0XFD07026C, 0xFF00FFFFU ,0x08000040U)  
		RegMask = (DDRC_PERFWR1_W_XACT_RUN_LENGTH_MASK | DDRC_PERFWR1_W_MAX_STARVE_MASK |  0 );

		RegVal = ((0x00000008U << DDRC_PERFWR1_W_XACT_RUN_LENGTH_SHIFT
			| 0x00000040U << DDRC_PERFWR1_W_MAX_STARVE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PERFWR1_OFFSET ,0xFF00FFFFU ,0x08000040U);
	/*############################################################################################################################ */

		/*Register : DQMAP5 @ 0XFD070294</p>

		All even ranks have the same DQ mapping controled by DQMAP0-4 register as rank 0. This register provides DQ swap function for
		all odd ranks to support CRC feature. rank based DQ swapping is: swap bit 0 with 1, swap bit 2 with 3, swap bit 4 with 5 and 
		wap bit 6 with 7. 1: Disable rank based DQ swapping 0: Enable rank based DQ swapping Present only in designs configured to su
		port DDR4.
		PSU_DDRC_DQMAP5_DIS_DQ_RANK_SWAP                                                0x1

		DQ Map Register 5
		(OFFSET, MASK, VALUE)      (0XFD070294, 0x00000001U ,0x00000001U)  
		RegMask = (DDRC_DQMAP5_DIS_DQ_RANK_SWAP_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_DQMAP5_DIS_DQ_RANK_SWAP_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DQMAP5_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : DBG0 @ 0XFD070300</p>

		When this is set to '0', auto-precharge is disabled for the flushed command in a collision case. Collision cases are write fo
		lowed by read to same address, read followed by write to same address, or write followed by write to same address with DBG0.d
		s_wc bit = 1 (where same address comparisons exclude the two address bits representing critical word). FOR DEBUG ONLY.
		PSU_DDRC_DBG0_DIS_COLLISION_PAGE_OPT                                            0x0

		When 1, disable write combine. FOR DEBUG ONLY
		PSU_DDRC_DBG0_DIS_WC                                                            0x0

		Debug Register 0
		(OFFSET, MASK, VALUE)      (0XFD070300, 0x00000011U ,0x00000000U)  
		RegMask = (DDRC_DBG0_DIS_COLLISION_PAGE_OPT_MASK | DDRC_DBG0_DIS_WC_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_DBG0_DIS_COLLISION_PAGE_OPT_SHIFT
			| 0x00000000U << DDRC_DBG0_DIS_WC_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DBG0_OFFSET ,0x00000011U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DBGCMD @ 0XFD07030C</p>

		Setting this register bit to 1 allows refresh and ZQCS commands to be triggered from hardware via the IOs ext_*. If set to 1,
		the fields DBGCMD.zq_calib_short and DBGCMD.rank*_refresh have no function, and are ignored by the uMCTL2 logic. Setting this
		register bit to 0 allows refresh and ZQCS to be triggered from software, via the fields DBGCMD.zq_calib_short and DBGCMD.rank
		_refresh. If set to 0, the hardware pins ext_* have no function, and are ignored by the uMCTL2 logic. This register is static
		 and may only be changed when the DDRC reset signal, core_ddrc_rstn, is asserted (0).
		PSU_DDRC_DBGCMD_HW_REF_ZQ_EN                                                    0x0

		Setting this register bit to 1 indicates to the uMCTL2 to issue a dfi_ctrlupd_req to the PHY. When this request is stored in 
		he uMCTL2, the bit is automatically cleared. This operation must only be performed when DFIUPD0.dis_auto_ctrlupd=1.
		PSU_DDRC_DBGCMD_CTRLUPD                                                         0x0

		Setting this register bit to 1 indicates to the uMCTL2 to issue a ZQCS (ZQ calibration short)/MPC(ZQ calibration) command to 
		he SDRAM. When this request is stored in the uMCTL2, the bit is automatically cleared. This operation can be performed only w
		en ZQCTL0.dis_auto_zq=1. It is recommended NOT to set this register bit if in Init operating mode. This register bit is ignor
		d when in Self-Refresh(except LPDDR4) and SR-Powerdown(LPDDR4) and Deep power-down operating modes and Maximum Power Saving M
		de.
		PSU_DDRC_DBGCMD_ZQ_CALIB_SHORT                                                  0x0

		Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 1. Writing to this bit causes DBGSTAT.rank1
		refresh_busy to be set. When DBGSTAT.rank1_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
		wn operating modes or Maximum Power Saving Mode.
		PSU_DDRC_DBGCMD_RANK1_REFRESH                                                   0x0

		Setting this register bit to 1 indicates to the uMCTL2 to issue a refresh to rank 0. Writing to this bit causes DBGSTAT.rank0
		refresh_busy to be set. When DBGSTAT.rank0_refresh_busy is cleared, the command has been stored in uMCTL2. This operation can
		be performed only when RFSHCTL3.dis_auto_refresh=1. It is recommended NOT to set this register bit if in Init or Deep power-d
		wn operating modes or Maximum Power Saving Mode.
		PSU_DDRC_DBGCMD_RANK0_REFRESH                                                   0x0

		Command Debug Register
		(OFFSET, MASK, VALUE)      (0XFD07030C, 0x80000033U ,0x00000000U)  
		RegMask = (DDRC_DBGCMD_HW_REF_ZQ_EN_MASK | DDRC_DBGCMD_CTRLUPD_MASK | DDRC_DBGCMD_ZQ_CALIB_SHORT_MASK | DDRC_DBGCMD_RANK1_REFRESH_MASK | DDRC_DBGCMD_RANK0_REFRESH_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_DBGCMD_HW_REF_ZQ_EN_SHIFT
			| 0x00000000U << DDRC_DBGCMD_CTRLUPD_SHIFT
			| 0x00000000U << DDRC_DBGCMD_ZQ_CALIB_SHORT_SHIFT
			| 0x00000000U << DDRC_DBGCMD_RANK1_REFRESH_SHIFT
			| 0x00000000U << DDRC_DBGCMD_RANK0_REFRESH_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DBGCMD_OFFSET ,0x80000033U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : SWCTL @ 0XFD070320</p>

		Enable quasi-dynamic register programming outside reset. Program register to 0 to enable quasi-dynamic programming. Set back 
		egister to 1 once programming is done.
		PSU_DDRC_SWCTL_SW_DONE                                                          0x0

		Software register programming control enable
		(OFFSET, MASK, VALUE)      (0XFD070320, 0x00000001U ,0x00000000U)  
		RegMask = (DDRC_SWCTL_SW_DONE_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_SWCTL_SW_DONE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_SWCTL_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : PCCFG @ 0XFD070400</p>

		Burst length expansion mode. By default (i.e. bl_exp_mode==0) XPI expands every AXI burst into multiple HIF commands, using t
		e memory burst length as a unit. If set to 1, then XPI will use half of the memory burst length as a unit. This applies to bo
		h reads and writes. When MSTR.data_bus_width==00, setting bl_exp_mode to 1 has no effect. This can be used in cases where Par
		ial Writes is enabled (UMCTL2_PARTIAL_WR=1) and DBG0.dis_wc=1, in order to avoid or minimize t_ccd_l penalty in DDR4 and t_cc
		_mw penalty in LPDDR4. Note that if DBICTL.reg_ddrc_dm_en=0, functionality is not supported in the following cases: - UMCTL2_
		ARTIAL_WR=0 - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=8 and MSTR.reg_ddrc_burst_rdwr=1000 (LP
		DR4 only) - UMCTL2_PARTIAL_WR=1, MSTR.reg_ddrc_data_bus_width=01, MEMC_BURST_LENGTH=4 and MSTR.reg_ddrc_burst_rdwr=0100 (DDR4
		only), with either MSTR.reg_ddrc_burstchop=0 or CRCPARCTL1.reg_ddrc_crc_enable=1 Functionality is also not supported if Share
		-AC is enabled
		PSU_DDRC_PCCFG_BL_EXP_MODE                                                      0x0

		Page match four limit. If set to 1, limits the number of consecutive same page DDRC transactions that can be granted by the P
		rt Arbiter to four when Page Match feature is enabled. If set to 0, there is no limit imposed on number of consecutive same p
		ge DDRC transactions.
		PSU_DDRC_PCCFG_PAGEMATCH_LIMIT                                                  0x0

		If set to 1 (enabled), sets co_gs_go2critical_wr and co_gs_go2critical_lpr/co_gs_go2critical_hpr signals going to DDRC based 
		n urgent input (awurgent, arurgent) coming from AXI master. If set to 0 (disabled), co_gs_go2critical_wr and co_gs_go2critica
		_lpr/co_gs_go2critical_hpr signals at DDRC are driven to 1b'0.
		PSU_DDRC_PCCFG_GO2CRITICAL_EN                                                   0x1

		Port Common Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD070400, 0x00000111U ,0x00000001U)  
		RegMask = (DDRC_PCCFG_BL_EXP_MODE_MASK | DDRC_PCCFG_PAGEMATCH_LIMIT_MASK | DDRC_PCCFG_GO2CRITICAL_EN_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCCFG_BL_EXP_MODE_SHIFT
			| 0x00000000U << DDRC_PCCFG_PAGEMATCH_LIMIT_SHIFT
			| 0x00000001U << DDRC_PCCFG_GO2CRITICAL_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCCFG_OFFSET ,0x00000111U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : PCFGR_0 @ 0XFD070404</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN                                           0x0

		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
		ess handshaking (it is not associated with any particular command).
		PSU_DDRC_PCFGR_0_RD_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the read channel of the port.
		PSU_DDRC_PCFGR_0_RD_PORT_AGING_EN                                               0x0

		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
		he two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGR_0_RD_PORT_PRIORITY                                               0xf

		Port n Configuration Read Register
		(OFFSET, MASK, VALUE)      (0XFD070404, 0x000073FFU ,0x0000200FU)  
		RegMask = (DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_0_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_0_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_0_RD_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGR_0_RD_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGR_0_RD_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGR_0_RD_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGR_0_RD_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGR_0_OFFSET ,0x000073FFU ,0x0000200FU);
	/*############################################################################################################################ */

		/*Register : PCFGW_0 @ 0XFD070408</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN                                           0x1

		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
		not associated with any particular command).
		PSU_DDRC_PCFGW_0_WR_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the write channel of the port.
		PSU_DDRC_PCFGW_0_WR_PORT_AGING_EN                                               0x0

		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGW_0_WR_PORT_PRIORITY                                               0xf

		Port n Configuration Write Register
		(OFFSET, MASK, VALUE)      (0XFD070408, 0x000073FFU ,0x0000600FU)  
		RegMask = (DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_0_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_0_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_0_WR_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGW_0_WR_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGW_0_WR_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGW_0_WR_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGW_0_WR_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGW_0_OFFSET ,0x000073FFU ,0x0000600FU);
	/*############################################################################################################################ */

		/*Register : PCTRL_0 @ 0XFD070490</p>

		Enables port n.
		PSU_DDRC_PCTRL_0_PORT_EN                                                        0x1

		Port n Control Register
		(OFFSET, MASK, VALUE)      (0XFD070490, 0x00000001U ,0x00000001U)  
		RegMask = (DDRC_PCTRL_0_PORT_EN_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCTRL_0_PORT_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCTRL_0_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS0_0 @ 0XFD070494</p>

		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_REGION1                                            0x2

		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_REGION0                                            0x0

		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
		 values.
		PSU_DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1                                             0xb

		Port n Read QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD070494, 0x0033000FU ,0x0020000BU)  
		RegMask = (DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_MASK |  0 );

		RegVal = ((0x00000002U << DDRC_PCFGQOS0_0_RQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGQOS0_0_RQOS_MAP_REGION0_SHIFT
			| 0x0000000BU << DDRC_PCFGQOS0_0_RQOS_MAP_LEVEL1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS0_0_OFFSET ,0x0033000FU ,0x0020000BU);
	/*############################################################################################################################ */

		/*Register : PCFGQOS1_0 @ 0XFD070498</p>

		Specifies the timeout value for transactions mapped to the red address queue.
		PSU_DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR                                           0x0

		Specifies the timeout value for transactions mapped to the blue address queue.
		PSU_DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB                                           0x0

		Port n Read QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD070498, 0x07FF07FFU ,0x00000000U)  
		RegMask = (DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTR_SHIFT
			| 0x00000000U << DDRC_PCFGQOS1_0_RQOS_MAP_TIMEOUTB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS1_0_OFFSET ,0x07FF07FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : PCFGR_1 @ 0XFD0704B4</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN                                           0x0

		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
		ess handshaking (it is not associated with any particular command).
		PSU_DDRC_PCFGR_1_RD_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the read channel of the port.
		PSU_DDRC_PCFGR_1_RD_PORT_AGING_EN                                               0x0

		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
		he two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGR_1_RD_PORT_PRIORITY                                               0xf

		Port n Configuration Read Register
		(OFFSET, MASK, VALUE)      (0XFD0704B4, 0x000073FFU ,0x0000200FU)  
		RegMask = (DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_1_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_1_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_1_RD_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGR_1_RD_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGR_1_RD_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGR_1_RD_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGR_1_RD_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGR_1_OFFSET ,0x000073FFU ,0x0000200FU);
	/*############################################################################################################################ */

		/*Register : PCFGW_1 @ 0XFD0704B8</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN                                           0x1

		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
		not associated with any particular command).
		PSU_DDRC_PCFGW_1_WR_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the write channel of the port.
		PSU_DDRC_PCFGW_1_WR_PORT_AGING_EN                                               0x0

		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGW_1_WR_PORT_PRIORITY                                               0xf

		Port n Configuration Write Register
		(OFFSET, MASK, VALUE)      (0XFD0704B8, 0x000073FFU ,0x0000600FU)  
		RegMask = (DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_1_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_1_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_1_WR_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGW_1_WR_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGW_1_WR_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGW_1_WR_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGW_1_WR_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGW_1_OFFSET ,0x000073FFU ,0x0000600FU);
	/*############################################################################################################################ */

		/*Register : PCTRL_1 @ 0XFD070540</p>

		Enables port n.
		PSU_DDRC_PCTRL_1_PORT_EN                                                        0x1

		Port n Control Register
		(OFFSET, MASK, VALUE)      (0XFD070540, 0x00000001U ,0x00000001U)  
		RegMask = (DDRC_PCTRL_1_PORT_EN_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCTRL_1_PORT_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCTRL_1_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS0_1 @ 0XFD070544</p>

		This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION2                                            0x2

		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION1                                            0x0

		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_REGION0                                            0x0

		Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
		ust be set to distinct values.
		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2                                             0xb

		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
		 values.
		PSU_DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1                                             0x3

		Port n Read QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD070544, 0x03330F0FU ,0x02000B03U)  
		RegMask = (DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_MASK | DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_MASK |  0 );

		RegVal = ((0x00000002U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION2_SHIFT
			| 0x00000000U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGQOS0_1_RQOS_MAP_REGION0_SHIFT
			| 0x0000000BU << DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL2_SHIFT
			| 0x00000003U << DDRC_PCFGQOS0_1_RQOS_MAP_LEVEL1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS0_1_OFFSET ,0x03330F0FU ,0x02000B03U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS1_1 @ 0XFD070548</p>

		Specifies the timeout value for transactions mapped to the red address queue.
		PSU_DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR                                           0x0

		Specifies the timeout value for transactions mapped to the blue address queue.
		PSU_DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB                                           0x0

		Port n Read QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD070548, 0x07FF07FFU ,0x00000000U)  
		RegMask = (DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTR_SHIFT
			| 0x00000000U << DDRC_PCFGQOS1_1_RQOS_MAP_TIMEOUTB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS1_1_OFFSET ,0x07FF07FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : PCFGR_2 @ 0XFD070564</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN                                           0x0

		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
		ess handshaking (it is not associated with any particular command).
		PSU_DDRC_PCFGR_2_RD_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the read channel of the port.
		PSU_DDRC_PCFGR_2_RD_PORT_AGING_EN                                               0x0

		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
		he two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGR_2_RD_PORT_PRIORITY                                               0xf

		Port n Configuration Read Register
		(OFFSET, MASK, VALUE)      (0XFD070564, 0x000073FFU ,0x0000200FU)  
		RegMask = (DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_2_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_2_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_2_RD_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGR_2_RD_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGR_2_RD_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGR_2_RD_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGR_2_RD_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGR_2_OFFSET ,0x000073FFU ,0x0000200FU);
	/*############################################################################################################################ */

		/*Register : PCFGW_2 @ 0XFD070568</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN                                           0x1

		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
		not associated with any particular command).
		PSU_DDRC_PCFGW_2_WR_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the write channel of the port.
		PSU_DDRC_PCFGW_2_WR_PORT_AGING_EN                                               0x0

		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGW_2_WR_PORT_PRIORITY                                               0xf

		Port n Configuration Write Register
		(OFFSET, MASK, VALUE)      (0XFD070568, 0x000073FFU ,0x0000600FU)  
		RegMask = (DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_2_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_2_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_2_WR_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGW_2_WR_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGW_2_WR_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGW_2_WR_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGW_2_WR_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGW_2_OFFSET ,0x000073FFU ,0x0000600FU);
	/*############################################################################################################################ */

		/*Register : PCTRL_2 @ 0XFD0705F0</p>

		Enables port n.
		PSU_DDRC_PCTRL_2_PORT_EN                                                        0x1

		Port n Control Register
		(OFFSET, MASK, VALUE)      (0XFD0705F0, 0x00000001U ,0x00000001U)  
		RegMask = (DDRC_PCTRL_2_PORT_EN_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCTRL_2_PORT_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCTRL_2_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS0_2 @ 0XFD0705F4</p>

		This bitfield indicates the traffic class of region2. For dual address queue configurations, region2 maps to the red address 
		ueue. Valid values are 1: VPR and 2: HPR only. When VPR support is disabled (UMCTL2_VPR_EN = 0) and traffic class of region2 
		s set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION2                                            0x2

		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION1                                            0x0

		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_REGION0                                            0x0

		Separation level2 indicating the end of region1 mapping; start of region1 is (level1 + 1). Possible values for level2 are (le
		el1 + 1) to 14 which corresponds to arqos. Region2 starts from (level2 + 1) up to 15. Note that for PA, arqos values are used
		directly as port priorities, where the higher the value corresponds to higher port priority. All of the map_level* registers 
		ust be set to distinct values.
		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2                                             0xb

		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
		 values.
		PSU_DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1                                             0x3

		Port n Read QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD0705F4, 0x03330F0FU ,0x02000B03U)  
		RegMask = (DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_MASK | DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_MASK |  0 );

		RegVal = ((0x00000002U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION2_SHIFT
			| 0x00000000U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGQOS0_2_RQOS_MAP_REGION0_SHIFT
			| 0x0000000BU << DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL2_SHIFT
			| 0x00000003U << DDRC_PCFGQOS0_2_RQOS_MAP_LEVEL1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS0_2_OFFSET ,0x03330F0FU ,0x02000B03U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS1_2 @ 0XFD0705F8</p>

		Specifies the timeout value for transactions mapped to the red address queue.
		PSU_DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR                                           0x0

		Specifies the timeout value for transactions mapped to the blue address queue.
		PSU_DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB                                           0x0

		Port n Read QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD0705F8, 0x07FF07FFU ,0x00000000U)  
		RegMask = (DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTR_SHIFT
			| 0x00000000U << DDRC_PCFGQOS1_2_RQOS_MAP_TIMEOUTB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS1_2_OFFSET ,0x07FF07FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : PCFGR_3 @ 0XFD070614</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN                                           0x0

		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
		ess handshaking (it is not associated with any particular command).
		PSU_DDRC_PCFGR_3_RD_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the read channel of the port.
		PSU_DDRC_PCFGR_3_RD_PORT_AGING_EN                                               0x0

		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
		he two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGR_3_RD_PORT_PRIORITY                                               0xf

		Port n Configuration Read Register
		(OFFSET, MASK, VALUE)      (0XFD070614, 0x000073FFU ,0x0000200FU)  
		RegMask = (DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_3_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_3_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_3_RD_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGR_3_RD_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGR_3_RD_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGR_3_RD_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGR_3_RD_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGR_3_OFFSET ,0x000073FFU ,0x0000200FU);
	/*############################################################################################################################ */

		/*Register : PCFGW_3 @ 0XFD070618</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN                                           0x1

		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
		not associated with any particular command).
		PSU_DDRC_PCFGW_3_WR_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the write channel of the port.
		PSU_DDRC_PCFGW_3_WR_PORT_AGING_EN                                               0x0

		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGW_3_WR_PORT_PRIORITY                                               0xf

		Port n Configuration Write Register
		(OFFSET, MASK, VALUE)      (0XFD070618, 0x000073FFU ,0x0000600FU)  
		RegMask = (DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_3_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_3_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_3_WR_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGW_3_WR_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGW_3_WR_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGW_3_WR_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGW_3_WR_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGW_3_OFFSET ,0x000073FFU ,0x0000600FU);
	/*############################################################################################################################ */

		/*Register : PCTRL_3 @ 0XFD0706A0</p>

		Enables port n.
		PSU_DDRC_PCTRL_3_PORT_EN                                                        0x1

		Port n Control Register
		(OFFSET, MASK, VALUE)      (0XFD0706A0, 0x00000001U ,0x00000001U)  
		RegMask = (DDRC_PCTRL_3_PORT_EN_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCTRL_3_PORT_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCTRL_3_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS0_3 @ 0XFD0706A4</p>

		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_REGION1                                            0x1

		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_REGION0                                            0x0

		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
		 values.
		PSU_DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1                                             0x3

		Port n Read QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD0706A4, 0x0033000FU ,0x00100003U)  
		RegMask = (DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGQOS0_3_RQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGQOS0_3_RQOS_MAP_REGION0_SHIFT
			| 0x00000003U << DDRC_PCFGQOS0_3_RQOS_MAP_LEVEL1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS0_3_OFFSET ,0x0033000FU ,0x00100003U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS1_3 @ 0XFD0706A8</p>

		Specifies the timeout value for transactions mapped to the red address queue.
		PSU_DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR                                           0x0

		Specifies the timeout value for transactions mapped to the blue address queue.
		PSU_DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB                                           0x4f

		Port n Read QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD0706A8, 0x07FF07FFU ,0x0000004FU)  
		RegMask = (DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTR_SHIFT
			| 0x0000004FU << DDRC_PCFGQOS1_3_RQOS_MAP_TIMEOUTB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS1_3_OFFSET ,0x07FF07FFU ,0x0000004FU);
	/*############################################################################################################################ */

		/*Register : PCFGWQOS0_3 @ 0XFD0706AC</p>

		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1                                           0x1

		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0                                           0x0

		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
		s to higher port priority.
		PSU_DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL                                             0x3

		Port n Write QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD0706AC, 0x0033000FU ,0x00100003U)  
		RegMask = (DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_3_WQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGWQOS0_3_WQOS_MAP_REGION0_SHIFT
			| 0x00000003U << DDRC_PCFGWQOS0_3_WQOS_MAP_LEVEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGWQOS0_3_OFFSET ,0x0033000FU ,0x00100003U);
	/*############################################################################################################################ */

		/*Register : PCFGWQOS1_3 @ 0XFD0706B0</p>

		Specifies the timeout value for write transactions.
		PSU_DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT                                           0x4f

		Port n Write QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD0706B0, 0x000007FFU ,0x0000004FU)  
		RegMask = (DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_MASK |  0 );

		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_3_WQOS_MAP_TIMEOUT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGWQOS1_3_OFFSET ,0x000007FFU ,0x0000004FU);
	/*############################################################################################################################ */

		/*Register : PCFGR_4 @ 0XFD0706C4</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN                                           0x1

		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
		ess handshaking (it is not associated with any particular command).
		PSU_DDRC_PCFGR_4_RD_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the read channel of the port.
		PSU_DDRC_PCFGR_4_RD_PORT_AGING_EN                                               0x0

		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
		he two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGR_4_RD_PORT_PRIORITY                                               0xf

		Port n Configuration Read Register
		(OFFSET, MASK, VALUE)      (0XFD0706C4, 0x000073FFU ,0x0000600FU)  
		RegMask = (DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_4_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_4_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_4_RD_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGR_4_RD_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGR_4_RD_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGR_4_RD_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGR_4_RD_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGR_4_OFFSET ,0x000073FFU ,0x0000600FU);
	/*############################################################################################################################ */

		/*Register : PCFGW_4 @ 0XFD0706C8</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN                                           0x1

		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
		not associated with any particular command).
		PSU_DDRC_PCFGW_4_WR_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the write channel of the port.
		PSU_DDRC_PCFGW_4_WR_PORT_AGING_EN                                               0x0

		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGW_4_WR_PORT_PRIORITY                                               0xf

		Port n Configuration Write Register
		(OFFSET, MASK, VALUE)      (0XFD0706C8, 0x000073FFU ,0x0000600FU)  
		RegMask = (DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_4_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_4_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_4_WR_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGW_4_WR_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGW_4_WR_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGW_4_WR_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGW_4_WR_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGW_4_OFFSET ,0x000073FFU ,0x0000600FU);
	/*############################################################################################################################ */

		/*Register : PCTRL_4 @ 0XFD070750</p>

		Enables port n.
		PSU_DDRC_PCTRL_4_PORT_EN                                                        0x1

		Port n Control Register
		(OFFSET, MASK, VALUE)      (0XFD070750, 0x00000001U ,0x00000001U)  
		RegMask = (DDRC_PCTRL_4_PORT_EN_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCTRL_4_PORT_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCTRL_4_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS0_4 @ 0XFD070754</p>

		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_REGION1                                            0x1

		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_REGION0                                            0x0

		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
		 values.
		PSU_DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1                                             0x3

		Port n Read QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD070754, 0x0033000FU ,0x00100003U)  
		RegMask = (DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGQOS0_4_RQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGQOS0_4_RQOS_MAP_REGION0_SHIFT
			| 0x00000003U << DDRC_PCFGQOS0_4_RQOS_MAP_LEVEL1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS0_4_OFFSET ,0x0033000FU ,0x00100003U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS1_4 @ 0XFD070758</p>

		Specifies the timeout value for transactions mapped to the red address queue.
		PSU_DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR                                           0x0

		Specifies the timeout value for transactions mapped to the blue address queue.
		PSU_DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB                                           0x4f

		Port n Read QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD070758, 0x07FF07FFU ,0x0000004FU)  
		RegMask = (DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTR_SHIFT
			| 0x0000004FU << DDRC_PCFGQOS1_4_RQOS_MAP_TIMEOUTB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS1_4_OFFSET ,0x07FF07FFU ,0x0000004FU);
	/*############################################################################################################################ */

		/*Register : PCFGWQOS0_4 @ 0XFD07075C</p>

		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1                                           0x1

		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0                                           0x0

		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
		s to higher port priority.
		PSU_DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL                                             0x3

		Port n Write QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD07075C, 0x0033000FU ,0x00100003U)  
		RegMask = (DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_4_WQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGWQOS0_4_WQOS_MAP_REGION0_SHIFT
			| 0x00000003U << DDRC_PCFGWQOS0_4_WQOS_MAP_LEVEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGWQOS0_4_OFFSET ,0x0033000FU ,0x00100003U);
	/*############################################################################################################################ */

		/*Register : PCFGWQOS1_4 @ 0XFD070760</p>

		Specifies the timeout value for write transactions.
		PSU_DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT                                           0x4f

		Port n Write QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD070760, 0x000007FFU ,0x0000004FU)  
		RegMask = (DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_MASK |  0 );

		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_4_WQOS_MAP_TIMEOUT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGWQOS1_4_OFFSET ,0x000007FFU ,0x0000004FU);
	/*############################################################################################################################ */

		/*Register : PCFGR_5 @ 0XFD070774</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN                                           0x0

		If set to 1, enables the AXI urgent sideband signal (arurgent). When enabled and arurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_lpr/co_gs_go2critical_hpr signal to DDRC is asserted if enabled in PCCFG.
		o2critical_en register. Note that arurgent signal can be asserted anytime and as long as required which is independent of add
		ess handshaking (it is not associated with any particular command).
		PSU_DDRC_PCFGR_5_RD_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the read channel of the port.
		PSU_DDRC_PCFGR_5_RD_PORT_AGING_EN                                               0x0

		Determines the initial load value of read aging counters. These counters will be parallel loaded after reset, or after each g
		ant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted. 
		he higher significant 5-bits of the read aging counter sets the priority of the read channel of a given port. Port's priority
		will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0, the corre
		ponding port channel will have the highest priority level (timeout condition - Priority0). For multi-port configurations, the
		aging counters cannot be used to set port priorities when external dynamic priority inputs (arqos) are enabled (timeout is st
		ll applicable). For single port configurations, the aging counters are only used when they timeout (become 0) to force read-w
		ite direction switching. In this case, external dynamic priority input, arqos (for reads only) can still be used to set the D
		RC read priority (2 priority levels: low priority read - LPR, high priority read - HPR) on a command by command basis. Note: 
		he two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGR_5_RD_PORT_PRIORITY                                               0xf

		Port n Configuration Read Register
		(OFFSET, MASK, VALUE)      (0XFD070774, 0x000073FFU ,0x0000200FU)  
		RegMask = (DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGR_5_RD_PORT_URGENT_EN_MASK | DDRC_PCFGR_5_RD_PORT_AGING_EN_MASK | DDRC_PCFGR_5_RD_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGR_5_RD_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGR_5_RD_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGR_5_RD_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGR_5_RD_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGR_5_OFFSET ,0x000073FFU ,0x0000200FU);
	/*############################################################################################################################ */

		/*Register : PCFGW_5 @ 0XFD070778</p>

		If set to 1, enables the Page Match feature. If enabled, once a requesting port is granted, the port is continued to be grant
		d if the following immediate commands are to the same memory page (same bank and same row). See also related PCCFG.pagematch_
		imit register.
		PSU_DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN                                           0x1

		If set to 1, enables the AXI urgent sideband signal (awurgent). When enabled and awurgent is asserted by the master, that por
		 becomes the highest priority and co_gs_go2critical_wr signal to DDRC is asserted if enabled in PCCFG.go2critical_en register
		 Note that awurgent signal can be asserted anytime and as long as required which is independent of address handshaking (it is
		not associated with any particular command).
		PSU_DDRC_PCFGW_5_WR_PORT_URGENT_EN                                              0x1

		If set to 1, enables aging function for the write channel of the port.
		PSU_DDRC_PCFGW_5_WR_PORT_AGING_EN                                               0x0

		Determines the initial load value of write aging counters. These counters will be parallel loaded after reset, or after each 
		rant to the corresponding port. The aging counters down-count every clock cycle where the port is requesting but not granted.
		The higher significant 5-bits of the write aging counter sets the initial priority of the write channel of a given port. Port
		s priority will increase as the higher significant 5-bits of the counter starts to decrease. When the aging counter becomes 0
		 the corresponding port channel will have the highest priority level. For multi-port configurations, the aging counters canno
		 be used to set port priorities when external dynamic priority inputs (awqos) are enabled (timeout is still applicable). For 
		ingle port configurations, the aging counters are only used when they timeout (become 0) to force read-write direction switch
		ng. Note: The two LSBs of this register field are tied internally to 2'b00.
		PSU_DDRC_PCFGW_5_WR_PORT_PRIORITY                                               0xf

		Port n Configuration Write Register
		(OFFSET, MASK, VALUE)      (0XFD070778, 0x000073FFU ,0x0000600FU)  
		RegMask = (DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_MASK | DDRC_PCFGW_5_WR_PORT_URGENT_EN_MASK | DDRC_PCFGW_5_WR_PORT_AGING_EN_MASK | DDRC_PCFGW_5_WR_PORT_PRIORITY_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGW_5_WR_PORT_PAGEMATCH_EN_SHIFT
			| 0x00000001U << DDRC_PCFGW_5_WR_PORT_URGENT_EN_SHIFT
			| 0x00000000U << DDRC_PCFGW_5_WR_PORT_AGING_EN_SHIFT
			| 0x0000000FU << DDRC_PCFGW_5_WR_PORT_PRIORITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGW_5_OFFSET ,0x000073FFU ,0x0000600FU);
	/*############################################################################################################################ */

		/*Register : PCTRL_5 @ 0XFD070800</p>

		Enables port n.
		PSU_DDRC_PCTRL_5_PORT_EN                                                        0x1

		Port n Control Register
		(OFFSET, MASK, VALUE)      (0XFD070800, 0x00000001U ,0x00000001U)  
		RegMask = (DDRC_PCTRL_5_PORT_EN_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCTRL_5_PORT_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCTRL_5_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS0_5 @ 0XFD070804</p>

		This bitfield indicates the traffic class of region 1. Valid values are: 0 : LPR, 1: VPR, 2: HPR. For dual address queue conf
		gurations, region1 maps to the blue address queue. In this case, valid values are 0: LPR and 1: VPR only. When VPR support is
		disabled (UMCTL2_VPR_EN = 0) and traffic class of region 1 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_REGION1                                            0x1

		This bitfield indicates the traffic class of region 0. Valid values are: 0: LPR, 1: VPR, 2: HPR. For dual address queue confi
		urations, region 0 maps to the blue address queue. In this case, valid values are: 0: LPR and 1: VPR only. When VPR support i
		 disabled (UMCTL2_VPR_EN = 0) and traffic class of region0 is set to 1 (VPR), VPR traffic is aliased to LPR traffic.
		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_REGION0                                            0x0

		Separation level1 indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 13 (for d
		al RAQ) or 0 to 14 (for single RAQ) which corresponds to arqos. Note that for PA, arqos values are used directly as port prio
		ities, where the higher the value corresponds to higher port priority. All of the map_level* registers must be set to distinc
		 values.
		PSU_DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1                                             0x3

		Port n Read QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD070804, 0x0033000FU ,0x00100003U)  
		RegMask = (DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_MASK | DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_MASK | DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGQOS0_5_RQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGQOS0_5_RQOS_MAP_REGION0_SHIFT
			| 0x00000003U << DDRC_PCFGQOS0_5_RQOS_MAP_LEVEL1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS0_5_OFFSET ,0x0033000FU ,0x00100003U);
	/*############################################################################################################################ */

		/*Register : PCFGQOS1_5 @ 0XFD070808</p>

		Specifies the timeout value for transactions mapped to the red address queue.
		PSU_DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR                                           0x0

		Specifies the timeout value for transactions mapped to the blue address queue.
		PSU_DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB                                           0x4f

		Port n Read QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD070808, 0x07FF07FFU ,0x0000004FU)  
		RegMask = (DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_MASK | DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTR_SHIFT
			| 0x0000004FU << DDRC_PCFGQOS1_5_RQOS_MAP_TIMEOUTB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGQOS1_5_OFFSET ,0x07FF07FFU ,0x0000004FU);
	/*############################################################################################################################ */

		/*Register : PCFGWQOS0_5 @ 0XFD07080C</p>

		This bitfield indicates the traffic class of region 1. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
		VPW_EN = 0) and traffic class of region 1 is set to 1 (VPW), VPW traffic is aliased to LPW traffic.
		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1                                           0x1

		This bitfield indicates the traffic class of region 0. Valid values are: 0: NPW, 1: VPW. When VPW support is disabled (UMCTL2
		VPW_EN = 0) and traffic class of region0 is set to 1 (VPW), VPW traffic is aliased to NPW traffic.
		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0                                           0x0

		Separation level indicating the end of region0 mapping; start of region0 is 0. Possible values for level1 are 0 to 14 which c
		rresponds to awqos. Note that for PA, awqos values are used directly as port priorities, where the higher the value correspon
		s to higher port priority.
		PSU_DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL                                             0x3

		Port n Write QoS Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD07080C, 0x0033000FU ,0x00100003U)  
		RegMask = (DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_MASK | DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_MASK | DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_MASK |  0 );

		RegVal = ((0x00000001U << DDRC_PCFGWQOS0_5_WQOS_MAP_REGION1_SHIFT
			| 0x00000000U << DDRC_PCFGWQOS0_5_WQOS_MAP_REGION0_SHIFT
			| 0x00000003U << DDRC_PCFGWQOS0_5_WQOS_MAP_LEVEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGWQOS0_5_OFFSET ,0x0033000FU ,0x00100003U);
	/*############################################################################################################################ */

		/*Register : PCFGWQOS1_5 @ 0XFD070810</p>

		Specifies the timeout value for write transactions.
		PSU_DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT                                           0x4f

		Port n Write QoS Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD070810, 0x000007FFU ,0x0000004FU)  
		RegMask = (DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_MASK |  0 );

		RegVal = ((0x0000004FU << DDRC_PCFGWQOS1_5_WQOS_MAP_TIMEOUT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_PCFGWQOS1_5_OFFSET ,0x000007FFU ,0x0000004FU);
	/*############################################################################################################################ */

		/*Register : SARBASE0 @ 0XFD070F04</p>

		Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).
		PSU_DDRC_SARBASE0_BASE_ADDR                                                     0x0

		SAR Base Address Register n
		(OFFSET, MASK, VALUE)      (0XFD070F04, 0x000001FFU ,0x00000000U)  
		RegMask = (DDRC_SARBASE0_BASE_ADDR_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_SARBASE0_BASE_ADDR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_SARBASE0_OFFSET ,0x000001FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : SARSIZE0 @ 0XFD070F08</p>

		Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
		or example, if register is programmed to 0, region will have 1 block.
		PSU_DDRC_SARSIZE0_NBLOCKS                                                       0x0

		SAR Size Register n
		(OFFSET, MASK, VALUE)      (0XFD070F08, 0x000000FFU ,0x00000000U)  
		RegMask = (DDRC_SARSIZE0_NBLOCKS_MASK |  0 );

		RegVal = ((0x00000000U << DDRC_SARSIZE0_NBLOCKS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_SARSIZE0_OFFSET ,0x000000FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : SARBASE1 @ 0XFD070F0C</p>

		Base address for address region n specified as awaddr[UMCTL2_A_ADDRW-1:x] and araddr[UMCTL2_A_ADDRW-1:x] where x is determine
		 by the minimum block size parameter UMCTL2_SARMINSIZE: (x=log2(block size)).
		PSU_DDRC_SARBASE1_BASE_ADDR                                                     0x10

		SAR Base Address Register n
		(OFFSET, MASK, VALUE)      (0XFD070F0C, 0x000001FFU ,0x00000010U)  
		RegMask = (DDRC_SARBASE1_BASE_ADDR_MASK |  0 );

		RegVal = ((0x00000010U << DDRC_SARBASE1_BASE_ADDR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_SARBASE1_OFFSET ,0x000001FFU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : SARSIZE1 @ 0XFD070F10</p>

		Number of blocks for address region n. This register determines the total size of the region in multiples of minimum block si
		e as specified by the hardware parameter UMCTL2_SARMINSIZE. The register value is encoded as number of blocks = nblocks + 1. 
		or example, if register is programmed to 0, region will have 1 block.
		PSU_DDRC_SARSIZE1_NBLOCKS                                                       0xf

		SAR Size Register n
		(OFFSET, MASK, VALUE)      (0XFD070F10, 0x000000FFU ,0x0000000FU)  
		RegMask = (DDRC_SARSIZE1_NBLOCKS_MASK |  0 );

		RegVal = ((0x0000000FU << DDRC_SARSIZE1_NBLOCKS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_SARSIZE1_OFFSET ,0x000000FFU ,0x0000000FU);
	/*############################################################################################################################ */

		/*Register : DFITMG0_SHADOW @ 0XFD072190</p>

		Specifies the number of DFI clock cycles after an assertion or de-assertion of the DFI control signals that the control signa
		s at the PHY-DRAM interface reflect the assertion or de-assertion. If the DFI clock and the memory clock are not phase-aligne
		, this timing parameter should be rounded up to the next integer value. Note that if using RDIMM, it is necessary to incremen
		 this parameter by RDIMM's extra cycle of latency in terms of DFI clock.
		PSU_DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY                                        0x7

		Defines whether dfi_rddata_en/dfi_rddata/dfi_rddata_valid is generated using HDR or SDR values Selects whether value in DFITM
		0.dfi_t_rddata_en is in terms of SDR or HDR clock cycles: - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles R
		fer to PHY specification for correct value.
		PSU_DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR                                      0x1

		Time from the assertion of a read command on the DFI interface to the assertion of the dfi_rddata_en signal. Refer to PHY spe
		ification for correct value. This corresponds to the DFI parameter trddata_en. Note that, depending on the PHY, if using RDIM
		, it may be necessary to use the value (CL + 1) in the calculation of trddata_en. This is to compensate for the extra cycle o
		 latency through the RDIMM. Unit: Clocks
		PSU_DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN                                         0x2

		Defines whether dfi_wrdata_en/dfi_wrdata/dfi_wrdata_mask is generated using HDR or SDR values Selects whether value in DFITMG
		.dfi_tphy_wrlat is in terms of SDR or HDR clock cycles Selects whether value in DFITMG0.dfi_tphy_wrdata is in terms of SDR or
		HDR clock cycles - 0 in terms of HDR clock cycles - 1 in terms of SDR clock cycles Refer to PHY specification for correct val
		e.
		PSU_DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR                                      0x1

		Specifies the number of clock cycles between when dfi_wrdata_en is asserted to when the associated write data is driven on th
		 dfi_wrdata signal. This corresponds to the DFI timing parameter tphy_wrdata. Refer to PHY specification for correct value. N
		te, max supported value is 8. Unit: Clocks
		PSU_DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA                                         0x0

		Write latency Number of clocks from the write command to write data enable (dfi_wrdata_en). This corresponds to the DFI timin
		 parameter tphy_wrlat. Refer to PHY specification for correct value.Note that, depending on the PHY, if using RDIMM, it may b
		 necessary to use the value (CL + 1) in the calculation of tphy_wrlat. This is to compensate for the extra cycle of latency t
		rough the RDIMM.
		PSU_DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT                                          0x2

		DFI Timing Shadow Register 0
		(OFFSET, MASK, VALUE)      (0XFD072190, 0x1FBFBF3FU ,0x07828002U)  
		RegMask = (DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_MASK | DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_MASK | DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_MASK | DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_MASK | DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_MASK | DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_MASK |  0 );

		RegVal = ((0x00000007U << DDRC_DFITMG0_SHADOW_DFI_T_CTRL_DELAY_SHIFT
			| 0x00000001U << DDRC_DFITMG0_SHADOW_DFI_RDDATA_USE_SDR_SHIFT
			| 0x00000002U << DDRC_DFITMG0_SHADOW_DFI_T_RDDATA_EN_SHIFT
			| 0x00000001U << DDRC_DFITMG0_SHADOW_DFI_WRDATA_USE_SDR_SHIFT
			| 0x00000000U << DDRC_DFITMG0_SHADOW_DFI_TPHY_WRDATA_SHIFT
			| 0x00000002U << DDRC_DFITMG0_SHADOW_DFI_TPHY_WRLAT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDRC_DFITMG0_SHADOW_OFFSET ,0x1FBFBF3FU ,0x07828002U);
	/*############################################################################################################################ */

		// : DDR CONTROLLER RESET
		/*Register : RST_DDR_SS @ 0XFD1A0108</p>

		DDR block level reset inside of the DDR Sub System
		PSU_CRF_APB_RST_DDR_SS_DDR_RESET                                                0X0

		DDR sub system block level reset
		(OFFSET, MASK, VALUE)      (0XFD1A0108, 0x00000008U ,0x00000000U)  
		RegMask = (CRF_APB_RST_DDR_SS_DDR_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_RST_DDR_SS_DDR_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_DDR_SS_OFFSET ,0x00000008U ,0x00000000U);
	/*############################################################################################################################ */

		// : DDR PHY
		/*Register : PGCR0 @ 0XFD080010</p>

		Address Copy
		PSU_DDR_PHY_PGCR0_ADCP                                                          0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_PGCR0_RESERVED_30_27                                                0x0

		PHY FIFO Reset
		PSU_DDR_PHY_PGCR0_PHYFRST                                                       0x1

		Oscillator Mode Address/Command Delay Line Select
		PSU_DDR_PHY_PGCR0_OSCACDL                                                       0x3

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_PGCR0_RESERVED_23_19                                                0x0

		Digital Test Output Select
		PSU_DDR_PHY_PGCR0_DTOSEL                                                        0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_PGCR0_RESERVED_13                                                   0x0

		Oscillator Mode Division
		PSU_DDR_PHY_PGCR0_OSCDIV                                                        0xf

		Oscillator Enable
		PSU_DDR_PHY_PGCR0_OSCEN                                                         0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_PGCR0_RESERVED_7_0                                                  0x0

		PHY General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080010, 0xFFFFFFFFU ,0x07001E00U)  
		RegMask = (DDR_PHY_PGCR0_ADCP_MASK | DDR_PHY_PGCR0_RESERVED_30_27_MASK | DDR_PHY_PGCR0_PHYFRST_MASK | DDR_PHY_PGCR0_OSCACDL_MASK | DDR_PHY_PGCR0_RESERVED_23_19_MASK | DDR_PHY_PGCR0_DTOSEL_MASK | DDR_PHY_PGCR0_RESERVED_13_MASK | DDR_PHY_PGCR0_OSCDIV_MASK | DDR_PHY_PGCR0_OSCEN_MASK | DDR_PHY_PGCR0_RESERVED_7_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_PGCR0_ADCP_SHIFT
			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_30_27_SHIFT
			| 0x00000001U << DDR_PHY_PGCR0_PHYFRST_SHIFT
			| 0x00000003U << DDR_PHY_PGCR0_OSCACDL_SHIFT
			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_23_19_SHIFT
			| 0x00000000U << DDR_PHY_PGCR0_DTOSEL_SHIFT
			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_13_SHIFT
			| 0x0000000FU << DDR_PHY_PGCR0_OSCDIV_SHIFT
			| 0x00000000U << DDR_PHY_PGCR0_OSCEN_SHIFT
			| 0x00000000U << DDR_PHY_PGCR0_RESERVED_7_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_PGCR0_OFFSET ,0xFFFFFFFFU ,0x07001E00U);
	/*############################################################################################################################ */

		/*Register : PGCR2 @ 0XFD080018</p>

		Clear Training Status Registers
		PSU_DDR_PHY_PGCR2_CLRTSTAT                                                      0x0

		Clear Impedance Calibration
		PSU_DDR_PHY_PGCR2_CLRZCAL                                                       0x0

		Clear Parity Error
		PSU_DDR_PHY_PGCR2_CLRPERR                                                       0x0

		Initialization Complete Pin Configuration
		PSU_DDR_PHY_PGCR2_ICPC                                                          0x0

		Data Training PUB Mode Exit Timer
		PSU_DDR_PHY_PGCR2_DTPMXTMR                                                      0xf

		Initialization Bypass
		PSU_DDR_PHY_PGCR2_INITFSMBYP                                                    0x0

		PLL FSM Bypass
		PSU_DDR_PHY_PGCR2_PLLFSMBYP                                                     0x0

		Refresh Period
		PSU_DDR_PHY_PGCR2_TREFPRD                                                       0x10028

		PHY General Configuration Register 2
		(OFFSET, MASK, VALUE)      (0XFD080018, 0xFFFFFFFFU ,0x00F10028U)  
		RegMask = (DDR_PHY_PGCR2_CLRTSTAT_MASK | DDR_PHY_PGCR2_CLRZCAL_MASK | DDR_PHY_PGCR2_CLRPERR_MASK | DDR_PHY_PGCR2_ICPC_MASK | DDR_PHY_PGCR2_DTPMXTMR_MASK | DDR_PHY_PGCR2_INITFSMBYP_MASK | DDR_PHY_PGCR2_PLLFSMBYP_MASK | DDR_PHY_PGCR2_TREFPRD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_PGCR2_CLRTSTAT_SHIFT
			| 0x00000000U << DDR_PHY_PGCR2_CLRZCAL_SHIFT
			| 0x00000000U << DDR_PHY_PGCR2_CLRPERR_SHIFT
			| 0x00000000U << DDR_PHY_PGCR2_ICPC_SHIFT
			| 0x0000000FU << DDR_PHY_PGCR2_DTPMXTMR_SHIFT
			| 0x00000000U << DDR_PHY_PGCR2_INITFSMBYP_SHIFT
			| 0x00000000U << DDR_PHY_PGCR2_PLLFSMBYP_SHIFT
			| 0x00010028U << DDR_PHY_PGCR2_TREFPRD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_PGCR2_OFFSET ,0xFFFFFFFFU ,0x00F10028U);
	/*############################################################################################################################ */

		/*Register : PGCR3 @ 0XFD08001C</p>

		CKN Enable
		PSU_DDR_PHY_PGCR3_CKNEN                                                         0x55

		CK Enable
		PSU_DDR_PHY_PGCR3_CKEN                                                          0xaa

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_PGCR3_RESERVED_15                                                   0x0

		Enable Clock Gating for AC [0] ctl_rd_clk
		PSU_DDR_PHY_PGCR3_GATEACRDCLK                                                   0x2

		Enable Clock Gating for AC [0] ddr_clk
		PSU_DDR_PHY_PGCR3_GATEACDDRCLK                                                  0x2

		Enable Clock Gating for AC [0] ctl_clk
		PSU_DDR_PHY_PGCR3_GATEACCTLCLK                                                  0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_PGCR3_RESERVED_8                                                    0x0

		Controls DDL Bypass Modes
		PSU_DDR_PHY_PGCR3_DDLBYPMODE                                                    0x2

		IO Loop-Back Select
		PSU_DDR_PHY_PGCR3_IOLB                                                          0x0

		AC Receive FIFO Read Mode
		PSU_DDR_PHY_PGCR3_RDMODE                                                        0x0

		Read FIFO Reset Disable
		PSU_DDR_PHY_PGCR3_DISRST                                                        0x0

		Clock Level when Clock Gating
		PSU_DDR_PHY_PGCR3_CLKLEVEL                                                      0x0

		PHY General Configuration Register 3
		(OFFSET, MASK, VALUE)      (0XFD08001C, 0xFFFFFFFFU ,0x55AA5480U)  
		RegMask = (DDR_PHY_PGCR3_CKNEN_MASK | DDR_PHY_PGCR3_CKEN_MASK | DDR_PHY_PGCR3_RESERVED_15_MASK | DDR_PHY_PGCR3_GATEACRDCLK_MASK | DDR_PHY_PGCR3_GATEACDDRCLK_MASK | DDR_PHY_PGCR3_GATEACCTLCLK_MASK | DDR_PHY_PGCR3_RESERVED_8_MASK | DDR_PHY_PGCR3_DDLBYPMODE_MASK | DDR_PHY_PGCR3_IOLB_MASK | DDR_PHY_PGCR3_RDMODE_MASK | DDR_PHY_PGCR3_DISRST_MASK | DDR_PHY_PGCR3_CLKLEVEL_MASK |  0 );

		RegVal = ((0x00000055U << DDR_PHY_PGCR3_CKNEN_SHIFT
			| 0x000000AAU << DDR_PHY_PGCR3_CKEN_SHIFT
			| 0x00000000U << DDR_PHY_PGCR3_RESERVED_15_SHIFT
			| 0x00000002U << DDR_PHY_PGCR3_GATEACRDCLK_SHIFT
			| 0x00000002U << DDR_PHY_PGCR3_GATEACDDRCLK_SHIFT
			| 0x00000002U << DDR_PHY_PGCR3_GATEACCTLCLK_SHIFT
			| 0x00000000U << DDR_PHY_PGCR3_RESERVED_8_SHIFT
			| 0x00000002U << DDR_PHY_PGCR3_DDLBYPMODE_SHIFT
			| 0x00000000U << DDR_PHY_PGCR3_IOLB_SHIFT
			| 0x00000000U << DDR_PHY_PGCR3_RDMODE_SHIFT
			| 0x00000000U << DDR_PHY_PGCR3_DISRST_SHIFT
			| 0x00000000U << DDR_PHY_PGCR3_CLKLEVEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_PGCR3_OFFSET ,0xFFFFFFFFU ,0x55AA5480U);
	/*############################################################################################################################ */

		/*Register : PGCR5 @ 0XFD080024</p>

		Frequency B Ratio Term
		PSU_DDR_PHY_PGCR5_FRQBT                                                         0x1

		Frequency A Ratio Term
		PSU_DDR_PHY_PGCR5_FRQAT                                                         0x1

		DFI Disconnect Time Period
		PSU_DDR_PHY_PGCR5_DISCNPERIOD                                                   0x0

		Receiver bias core side control
		PSU_DDR_PHY_PGCR5_VREF_RBCTRL                                                   0xf

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_PGCR5_RESERVED_3                                                    0x0

		Internal VREF generator REFSEL ragne select
		PSU_DDR_PHY_PGCR5_DXREFISELRANGE                                                0x1

		DDL Page Read Write select
		PSU_DDR_PHY_PGCR5_DDLPGACT                                                      0x0

		DDL Page Read Write select
		PSU_DDR_PHY_PGCR5_DDLPGRW                                                       0x0

		PHY General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080024, 0xFFFFFFFFU ,0x010100F4U)  
		RegMask = (DDR_PHY_PGCR5_FRQBT_MASK | DDR_PHY_PGCR5_FRQAT_MASK | DDR_PHY_PGCR5_DISCNPERIOD_MASK | DDR_PHY_PGCR5_VREF_RBCTRL_MASK | DDR_PHY_PGCR5_RESERVED_3_MASK | DDR_PHY_PGCR5_DXREFISELRANGE_MASK | DDR_PHY_PGCR5_DDLPGACT_MASK | DDR_PHY_PGCR5_DDLPGRW_MASK |  0 );

		RegVal = ((0x00000001U << DDR_PHY_PGCR5_FRQBT_SHIFT
			| 0x00000001U << DDR_PHY_PGCR5_FRQAT_SHIFT
			| 0x00000000U << DDR_PHY_PGCR5_DISCNPERIOD_SHIFT
			| 0x0000000FU << DDR_PHY_PGCR5_VREF_RBCTRL_SHIFT
			| 0x00000000U << DDR_PHY_PGCR5_RESERVED_3_SHIFT
			| 0x00000001U << DDR_PHY_PGCR5_DXREFISELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_PGCR5_DDLPGACT_SHIFT
			| 0x00000000U << DDR_PHY_PGCR5_DDLPGRW_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_PGCR5_OFFSET ,0xFFFFFFFFU ,0x010100F4U);
	/*############################################################################################################################ */

		/*Register : PTR0 @ 0XFD080040</p>

		PLL Power-Down Time
		PSU_DDR_PHY_PTR0_TPLLPD                                                         0x2f0

		PLL Gear Shift Time
		PSU_DDR_PHY_PTR0_TPLLGS                                                         0x60

		PHY Reset Time
		PSU_DDR_PHY_PTR0_TPHYRST                                                        0x10

		PHY Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD080040, 0xFFFFFFFFU ,0x5E001810U)  
		RegMask = (DDR_PHY_PTR0_TPLLPD_MASK | DDR_PHY_PTR0_TPLLGS_MASK | DDR_PHY_PTR0_TPHYRST_MASK |  0 );

		RegVal = ((0x000002F0U << DDR_PHY_PTR0_TPLLPD_SHIFT
			| 0x00000060U << DDR_PHY_PTR0_TPLLGS_SHIFT
			| 0x00000010U << DDR_PHY_PTR0_TPHYRST_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_PTR0_OFFSET ,0xFFFFFFFFU ,0x5E001810U);
	/*############################################################################################################################ */

		/*Register : PTR1 @ 0XFD080044</p>

		PLL Lock Time
		PSU_DDR_PHY_PTR1_TPLLLOCK                                                       0x80

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_PTR1_RESERVED_15_13                                                 0x0

		PLL Reset Time
		PSU_DDR_PHY_PTR1_TPLLRST                                                        0x5f0

		PHY Timing Register 1
		(OFFSET, MASK, VALUE)      (0XFD080044, 0xFFFFFFFFU ,0x008005F0U)  
		RegMask = (DDR_PHY_PTR1_TPLLLOCK_MASK | DDR_PHY_PTR1_RESERVED_15_13_MASK | DDR_PHY_PTR1_TPLLRST_MASK |  0 );

		RegVal = ((0x00000080U << DDR_PHY_PTR1_TPLLLOCK_SHIFT
			| 0x00000000U << DDR_PHY_PTR1_RESERVED_15_13_SHIFT
			| 0x000005F0U << DDR_PHY_PTR1_TPLLRST_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_PTR1_OFFSET ,0xFFFFFFFFU ,0x008005F0U);
	/*############################################################################################################################ */

		/*Register : DSGCR @ 0XFD080090</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DSGCR_RESERVED_31_28                                                0x0

		When RDBI enabled, this bit is used to select RDBI CL calculation, if it is 1b1, calculation will use RDBICL, otherwise use d
		fault calculation.
		PSU_DDR_PHY_DSGCR_RDBICLSEL                                                     0x0

		When RDBI enabled, if RDBICLSEL is asserted, RDBI CL adjust using this value.
		PSU_DDR_PHY_DSGCR_RDBICL                                                        0x2

		PHY Impedance Update Enable
		PSU_DDR_PHY_DSGCR_PHYZUEN                                                       0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DSGCR_RESERVED_22                                                   0x0

		SDRAM Reset Output Enable
		PSU_DDR_PHY_DSGCR_RSTOE                                                         0x1

		Single Data Rate Mode
		PSU_DDR_PHY_DSGCR_SDRMODE                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DSGCR_RESERVED_18                                                   0x0

		ATO Analog Test Enable
		PSU_DDR_PHY_DSGCR_ATOAE                                                         0x0

		DTO Output Enable
		PSU_DDR_PHY_DSGCR_DTOOE                                                         0x0

		DTO I/O Mode
		PSU_DDR_PHY_DSGCR_DTOIOM                                                        0x0

		DTO Power Down Receiver
		PSU_DDR_PHY_DSGCR_DTOPDR                                                        0x1

		Reserved. Return zeroes on reads
		PSU_DDR_PHY_DSGCR_RESERVED_13                                                   0x0

		DTO On-Die Termination
		PSU_DDR_PHY_DSGCR_DTOODT                                                        0x0

		PHY Update Acknowledge Delay
		PSU_DDR_PHY_DSGCR_PUAD                                                          0x4

		Controller Update Acknowledge Enable
		PSU_DDR_PHY_DSGCR_CUAEN                                                         0x1

		Reserved. Return zeroes on reads
		PSU_DDR_PHY_DSGCR_RESERVED_4_3                                                  0x0

		Controller Impedance Update Enable
		PSU_DDR_PHY_DSGCR_CTLZUEN                                                       0x0

		Reserved. Return zeroes on reads
		PSU_DDR_PHY_DSGCR_RESERVED_1                                                    0x0

		PHY Update Request Enable
		PSU_DDR_PHY_DSGCR_PUREN                                                         0x1

		DDR System General Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD080090, 0xFFFFFFFFU ,0x02A04121U)  
		RegMask = (DDR_PHY_DSGCR_RESERVED_31_28_MASK | DDR_PHY_DSGCR_RDBICLSEL_MASK | DDR_PHY_DSGCR_RDBICL_MASK | DDR_PHY_DSGCR_PHYZUEN_MASK | DDR_PHY_DSGCR_RESERVED_22_MASK | DDR_PHY_DSGCR_RSTOE_MASK | DDR_PHY_DSGCR_SDRMODE_MASK | DDR_PHY_DSGCR_RESERVED_18_MASK | DDR_PHY_DSGCR_ATOAE_MASK | DDR_PHY_DSGCR_DTOOE_MASK | DDR_PHY_DSGCR_DTOIOM_MASK | DDR_PHY_DSGCR_DTOPDR_MASK | DDR_PHY_DSGCR_RESERVED_13_MASK | DDR_PHY_DSGCR_DTOODT_MASK | DDR_PHY_DSGCR_PUAD_MASK | DDR_PHY_DSGCR_CUAEN_MASK | DDR_PHY_DSGCR_RESERVED_4_3_MASK | DDR_PHY_DSGCR_CTLZUEN_MASK | DDR_PHY_DSGCR_RESERVED_1_MASK | DDR_PHY_DSGCR_PUREN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DSGCR_RESERVED_31_28_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_RDBICLSEL_SHIFT
			| 0x00000002U << DDR_PHY_DSGCR_RDBICL_SHIFT
			| 0x00000001U << DDR_PHY_DSGCR_PHYZUEN_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_22_SHIFT
			| 0x00000001U << DDR_PHY_DSGCR_RSTOE_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_SDRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_18_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_ATOAE_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_DTOOE_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_DTOIOM_SHIFT
			| 0x00000001U << DDR_PHY_DSGCR_DTOPDR_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_13_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_DTOODT_SHIFT
			| 0x00000004U << DDR_PHY_DSGCR_PUAD_SHIFT
			| 0x00000001U << DDR_PHY_DSGCR_CUAEN_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_4_3_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_CTLZUEN_SHIFT
			| 0x00000000U << DDR_PHY_DSGCR_RESERVED_1_SHIFT
			| 0x00000001U << DDR_PHY_DSGCR_PUREN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DSGCR_OFFSET ,0xFFFFFFFFU ,0x02A04121U);
	/*############################################################################################################################ */

		/*Register : DCR @ 0XFD080100</p>

		DDR4 Gear Down Timing.
		PSU_DDR_PHY_DCR_GEARDN                                                          0x0

		Un-used Bank Group
		PSU_DDR_PHY_DCR_UBG                                                             0x0

		Un-buffered DIMM Address Mirroring
		PSU_DDR_PHY_DCR_UDIMM                                                           0x0

		DDR 2T Timing
		PSU_DDR_PHY_DCR_DDR2T                                                           0x0

		No Simultaneous Rank Access
		PSU_DDR_PHY_DCR_NOSRA                                                           0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DCR_RESERVED_26_18                                                  0x0

		Byte Mask
		PSU_DDR_PHY_DCR_BYTEMASK                                                        0x1

		DDR Type
		PSU_DDR_PHY_DCR_DDRTYPE                                                         0x0

		Multi-Purpose Register (MPR) DQ (DDR3 Only)
		PSU_DDR_PHY_DCR_MPRDQ                                                           0x0

		Primary DQ (DDR3 Only)
		PSU_DDR_PHY_DCR_PDQ                                                             0x0

		DDR 8-Bank
		PSU_DDR_PHY_DCR_DDR8BNK                                                         0x1

		DDR Mode
		PSU_DDR_PHY_DCR_DDRMD                                                           0x4

		DRAM Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD080100, 0xFFFFFFFFU ,0x0800040CU)  
		RegMask = (DDR_PHY_DCR_GEARDN_MASK | DDR_PHY_DCR_UBG_MASK | DDR_PHY_DCR_UDIMM_MASK | DDR_PHY_DCR_DDR2T_MASK | DDR_PHY_DCR_NOSRA_MASK | DDR_PHY_DCR_RESERVED_26_18_MASK | DDR_PHY_DCR_BYTEMASK_MASK | DDR_PHY_DCR_DDRTYPE_MASK | DDR_PHY_DCR_MPRDQ_MASK | DDR_PHY_DCR_PDQ_MASK | DDR_PHY_DCR_DDR8BNK_MASK | DDR_PHY_DCR_DDRMD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DCR_GEARDN_SHIFT
			| 0x00000000U << DDR_PHY_DCR_UBG_SHIFT
			| 0x00000000U << DDR_PHY_DCR_UDIMM_SHIFT
			| 0x00000000U << DDR_PHY_DCR_DDR2T_SHIFT
			| 0x00000001U << DDR_PHY_DCR_NOSRA_SHIFT
			| 0x00000000U << DDR_PHY_DCR_RESERVED_26_18_SHIFT
			| 0x00000001U << DDR_PHY_DCR_BYTEMASK_SHIFT
			| 0x00000000U << DDR_PHY_DCR_DDRTYPE_SHIFT
			| 0x00000000U << DDR_PHY_DCR_MPRDQ_SHIFT
			| 0x00000000U << DDR_PHY_DCR_PDQ_SHIFT
			| 0x00000001U << DDR_PHY_DCR_DDR8BNK_SHIFT
			| 0x00000004U << DDR_PHY_DCR_DDRMD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DCR_OFFSET ,0xFFFFFFFFU ,0x0800040CU);
	/*############################################################################################################################ */

		/*Register : DTPR0 @ 0XFD080110</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR0_RESERVED_31_29                                                0x0

		Activate to activate command delay (different banks)
		PSU_DDR_PHY_DTPR0_TRRD                                                          0x6

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR0_RESERVED_23                                                   0x0

		Activate to precharge command delay
		PSU_DDR_PHY_DTPR0_TRAS                                                          0x24

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR0_RESERVED_15                                                   0x0

		Precharge command period
		PSU_DDR_PHY_DTPR0_TRP                                                           0xf

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR0_RESERVED_7_5                                                  0x0

		Internal read to precharge command delay
		PSU_DDR_PHY_DTPR0_TRTP                                                          0x9

		DRAM Timing Parameters Register 0
		(OFFSET, MASK, VALUE)      (0XFD080110, 0xFFFFFFFFU ,0x06240F09U)  
		RegMask = (DDR_PHY_DTPR0_RESERVED_31_29_MASK | DDR_PHY_DTPR0_TRRD_MASK | DDR_PHY_DTPR0_RESERVED_23_MASK | DDR_PHY_DTPR0_TRAS_MASK | DDR_PHY_DTPR0_RESERVED_15_MASK | DDR_PHY_DTPR0_TRP_MASK | DDR_PHY_DTPR0_RESERVED_7_5_MASK | DDR_PHY_DTPR0_TRTP_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DTPR0_RESERVED_31_29_SHIFT
			| 0x00000006U << DDR_PHY_DTPR0_TRRD_SHIFT
			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_23_SHIFT
			| 0x00000024U << DDR_PHY_DTPR0_TRAS_SHIFT
			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_15_SHIFT
			| 0x0000000FU << DDR_PHY_DTPR0_TRP_SHIFT
			| 0x00000000U << DDR_PHY_DTPR0_RESERVED_7_5_SHIFT
			| 0x00000009U << DDR_PHY_DTPR0_TRTP_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTPR0_OFFSET ,0xFFFFFFFFU ,0x06240F09U);
	/*############################################################################################################################ */

		/*Register : DTPR1 @ 0XFD080114</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR1_RESERVED_31                                                   0x0

		Minimum delay from when write leveling mode is programmed to the first DQS/DQS# rising edge.
		PSU_DDR_PHY_DTPR1_TWLMRD                                                        0x28

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR1_RESERVED_23                                                   0x0

		4-bank activate period
		PSU_DDR_PHY_DTPR1_TFAW                                                          0x18

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR1_RESERVED_15_11                                                0x0

		Load mode update delay (DDR4 and DDR3 only)
		PSU_DDR_PHY_DTPR1_TMOD                                                          0x7

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR1_RESERVED_7_5                                                  0x0

		Load mode cycle time
		PSU_DDR_PHY_DTPR1_TMRD                                                          0x8

		DRAM Timing Parameters Register 1
		(OFFSET, MASK, VALUE)      (0XFD080114, 0xFFFFFFFFU ,0x28180708U)  
		RegMask = (DDR_PHY_DTPR1_RESERVED_31_MASK | DDR_PHY_DTPR1_TWLMRD_MASK | DDR_PHY_DTPR1_RESERVED_23_MASK | DDR_PHY_DTPR1_TFAW_MASK | DDR_PHY_DTPR1_RESERVED_15_11_MASK | DDR_PHY_DTPR1_TMOD_MASK | DDR_PHY_DTPR1_RESERVED_7_5_MASK | DDR_PHY_DTPR1_TMRD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DTPR1_RESERVED_31_SHIFT
			| 0x00000028U << DDR_PHY_DTPR1_TWLMRD_SHIFT
			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_23_SHIFT
			| 0x00000018U << DDR_PHY_DTPR1_TFAW_SHIFT
			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_15_11_SHIFT
			| 0x00000007U << DDR_PHY_DTPR1_TMOD_SHIFT
			| 0x00000000U << DDR_PHY_DTPR1_RESERVED_7_5_SHIFT
			| 0x00000008U << DDR_PHY_DTPR1_TMRD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTPR1_OFFSET ,0xFFFFFFFFU ,0x28180708U);
	/*############################################################################################################################ */

		/*Register : DTPR2 @ 0XFD080118</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR2_RESERVED_31_29                                                0x0

		Read to Write command delay. Valid values are
		PSU_DDR_PHY_DTPR2_TRTW                                                          0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR2_RESERVED_27_25                                                0x0

		Read to ODT delay (DDR3 only)
		PSU_DDR_PHY_DTPR2_TRTODT                                                        0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR2_RESERVED_23_20                                                0x0

		CKE minimum pulse width
		PSU_DDR_PHY_DTPR2_TCKE                                                          0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR2_RESERVED_15_10                                                0x0

		Self refresh exit delay
		PSU_DDR_PHY_DTPR2_TXS                                                           0x200

		DRAM Timing Parameters Register 2
		(OFFSET, MASK, VALUE)      (0XFD080118, 0xFFFFFFFFU ,0x00080200U)  
		RegMask = (DDR_PHY_DTPR2_RESERVED_31_29_MASK | DDR_PHY_DTPR2_TRTW_MASK | DDR_PHY_DTPR2_RESERVED_27_25_MASK | DDR_PHY_DTPR2_TRTODT_MASK | DDR_PHY_DTPR2_RESERVED_23_20_MASK | DDR_PHY_DTPR2_TCKE_MASK | DDR_PHY_DTPR2_RESERVED_15_10_MASK | DDR_PHY_DTPR2_TXS_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DTPR2_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DTPR2_TRTW_SHIFT
			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_27_25_SHIFT
			| 0x00000000U << DDR_PHY_DTPR2_TRTODT_SHIFT
			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_23_20_SHIFT
			| 0x00000008U << DDR_PHY_DTPR2_TCKE_SHIFT
			| 0x00000000U << DDR_PHY_DTPR2_RESERVED_15_10_SHIFT
			| 0x00000200U << DDR_PHY_DTPR2_TXS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTPR2_OFFSET ,0xFFFFFFFFU ,0x00080200U);
	/*############################################################################################################################ */

		/*Register : DTPR3 @ 0XFD08011C</p>

		ODT turn-off delay extension
		PSU_DDR_PHY_DTPR3_TOFDX                                                         0x4

		Read to read and write to write command delay
		PSU_DDR_PHY_DTPR3_TCCD                                                          0x0

		DLL locking time
		PSU_DDR_PHY_DTPR3_TDLLK                                                         0x300

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR3_RESERVED_15_12                                                0x0

		Maximum DQS output access time from CK/CK# (LPDDR2/3 only)
		PSU_DDR_PHY_DTPR3_TDQSCKMAX                                                     0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR3_RESERVED_7_3                                                  0x0

		DQS output access time from CK/CK# (LPDDR2/3 only)
		PSU_DDR_PHY_DTPR3_TDQSCK                                                        0x0

		DRAM Timing Parameters Register 3
		(OFFSET, MASK, VALUE)      (0XFD08011C, 0xFFFFFFFFU ,0x83000800U)  
		RegMask = (DDR_PHY_DTPR3_TOFDX_MASK | DDR_PHY_DTPR3_TCCD_MASK | DDR_PHY_DTPR3_TDLLK_MASK | DDR_PHY_DTPR3_RESERVED_15_12_MASK | DDR_PHY_DTPR3_TDQSCKMAX_MASK | DDR_PHY_DTPR3_RESERVED_7_3_MASK | DDR_PHY_DTPR3_TDQSCK_MASK |  0 );

		RegVal = ((0x00000004U << DDR_PHY_DTPR3_TOFDX_SHIFT
			| 0x00000000U << DDR_PHY_DTPR3_TCCD_SHIFT
			| 0x00000300U << DDR_PHY_DTPR3_TDLLK_SHIFT
			| 0x00000000U << DDR_PHY_DTPR3_RESERVED_15_12_SHIFT
			| 0x00000008U << DDR_PHY_DTPR3_TDQSCKMAX_SHIFT
			| 0x00000000U << DDR_PHY_DTPR3_RESERVED_7_3_SHIFT
			| 0x00000000U << DDR_PHY_DTPR3_TDQSCK_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTPR3_OFFSET ,0xFFFFFFFFU ,0x83000800U);
	/*############################################################################################################################ */

		/*Register : DTPR4 @ 0XFD080120</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR4_RESERVED_31_30                                                0x0

		ODT turn-on/turn-off delays (DDR2 only)
		PSU_DDR_PHY_DTPR4_TAOND_TAOFD                                                   0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR4_RESERVED_27_26                                                0x0

		Refresh-to-Refresh
		PSU_DDR_PHY_DTPR4_TRFC                                                          0x116

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR4_RESERVED_15_14                                                0x0

		Write leveling output delay
		PSU_DDR_PHY_DTPR4_TWLO                                                          0x2b

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR4_RESERVED_7_5                                                  0x0

		Power down exit delay
		PSU_DDR_PHY_DTPR4_TXP                                                           0x8

		DRAM Timing Parameters Register 4
		(OFFSET, MASK, VALUE)      (0XFD080120, 0xFFFFFFFFU ,0x01162B08U)  
		RegMask = (DDR_PHY_DTPR4_RESERVED_31_30_MASK | DDR_PHY_DTPR4_TAOND_TAOFD_MASK | DDR_PHY_DTPR4_RESERVED_27_26_MASK | DDR_PHY_DTPR4_TRFC_MASK | DDR_PHY_DTPR4_RESERVED_15_14_MASK | DDR_PHY_DTPR4_TWLO_MASK | DDR_PHY_DTPR4_RESERVED_7_5_MASK | DDR_PHY_DTPR4_TXP_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DTPR4_RESERVED_31_30_SHIFT
			| 0x00000000U << DDR_PHY_DTPR4_TAOND_TAOFD_SHIFT
			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_27_26_SHIFT
			| 0x00000116U << DDR_PHY_DTPR4_TRFC_SHIFT
			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DTPR4_TWLO_SHIFT
			| 0x00000000U << DDR_PHY_DTPR4_RESERVED_7_5_SHIFT
			| 0x00000008U << DDR_PHY_DTPR4_TXP_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTPR4_OFFSET ,0xFFFFFFFFU ,0x01162B08U);
	/*############################################################################################################################ */

		/*Register : DTPR5 @ 0XFD080124</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR5_RESERVED_31_24                                                0x0

		Activate to activate command delay (same bank)
		PSU_DDR_PHY_DTPR5_TRC                                                           0x32

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR5_RESERVED_15                                                   0x0

		Activate to read or write delay
		PSU_DDR_PHY_DTPR5_TRCD                                                          0xf

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR5_RESERVED_7_5                                                  0x0

		Internal write to read command delay
		PSU_DDR_PHY_DTPR5_TWTR                                                          0x9

		DRAM Timing Parameters Register 5
		(OFFSET, MASK, VALUE)      (0XFD080124, 0xFFFFFFFFU ,0x00320F09U)  
		RegMask = (DDR_PHY_DTPR5_RESERVED_31_24_MASK | DDR_PHY_DTPR5_TRC_MASK | DDR_PHY_DTPR5_RESERVED_15_MASK | DDR_PHY_DTPR5_TRCD_MASK | DDR_PHY_DTPR5_RESERVED_7_5_MASK | DDR_PHY_DTPR5_TWTR_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DTPR5_RESERVED_31_24_SHIFT
			| 0x00000032U << DDR_PHY_DTPR5_TRC_SHIFT
			| 0x00000000U << DDR_PHY_DTPR5_RESERVED_15_SHIFT
			| 0x0000000FU << DDR_PHY_DTPR5_TRCD_SHIFT
			| 0x00000000U << DDR_PHY_DTPR5_RESERVED_7_5_SHIFT
			| 0x00000009U << DDR_PHY_DTPR5_TWTR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTPR5_OFFSET ,0xFFFFFFFFU ,0x00320F09U);
	/*############################################################################################################################ */

		/*Register : DTPR6 @ 0XFD080128</p>

		PUB Write Latency Enable
		PSU_DDR_PHY_DTPR6_PUBWLEN                                                       0x0

		PUB Read Latency Enable
		PSU_DDR_PHY_DTPR6_PUBRLEN                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR6_RESERVED_29_14                                                0x0

		Write Latency
		PSU_DDR_PHY_DTPR6_PUBWL                                                         0xe

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTPR6_RESERVED_7_6                                                  0x0

		Read Latency
		PSU_DDR_PHY_DTPR6_PUBRL                                                         0xf

		DRAM Timing Parameters Register 6
		(OFFSET, MASK, VALUE)      (0XFD080128, 0xFFFFFFFFU ,0x00000E0FU)  
		RegMask = (DDR_PHY_DTPR6_PUBWLEN_MASK | DDR_PHY_DTPR6_PUBRLEN_MASK | DDR_PHY_DTPR6_RESERVED_29_14_MASK | DDR_PHY_DTPR6_PUBWL_MASK | DDR_PHY_DTPR6_RESERVED_7_6_MASK | DDR_PHY_DTPR6_PUBRL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DTPR6_PUBWLEN_SHIFT
			| 0x00000000U << DDR_PHY_DTPR6_PUBRLEN_SHIFT
			| 0x00000000U << DDR_PHY_DTPR6_RESERVED_29_14_SHIFT
			| 0x0000000EU << DDR_PHY_DTPR6_PUBWL_SHIFT
			| 0x00000000U << DDR_PHY_DTPR6_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DTPR6_PUBRL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTPR6_OFFSET ,0xFFFFFFFFU ,0x00000E0FU);
	/*############################################################################################################################ */

		/*Register : RDIMMGCR0 @ 0XFD080140</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR0_RESERVED_31                                               0x0

		RDMIMM Quad CS Enable
		PSU_DDR_PHY_RDIMMGCR0_QCSEN                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR0_RESERVED_29_28                                            0x0

		RDIMM Outputs I/O Mode
		PSU_DDR_PHY_RDIMMGCR0_RDIMMIOM                                                  0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR0_RESERVED_26_24                                            0x0

		ERROUT# Output Enable
		PSU_DDR_PHY_RDIMMGCR0_ERROUTOE                                                  0x0

		ERROUT# I/O Mode
		PSU_DDR_PHY_RDIMMGCR0_ERROUTIOM                                                 0x1

		ERROUT# Power Down Receiver
		PSU_DDR_PHY_RDIMMGCR0_ERROUTPDR                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR0_RESERVED_20                                               0x0

		ERROUT# On-Die Termination
		PSU_DDR_PHY_RDIMMGCR0_ERROUTODT                                                 0x0

		Load Reduced DIMM
		PSU_DDR_PHY_RDIMMGCR0_LRDIMM                                                    0x0

		PAR_IN I/O Mode
		PSU_DDR_PHY_RDIMMGCR0_PARINIOM                                                  0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR0_RESERVED_16_8                                             0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD                                             0x0

		Rank Mirror Enable.
		PSU_DDR_PHY_RDIMMGCR0_RNKMRREN                                                  0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR0_RESERVED_3                                                0x0

		Stop on Parity Error
		PSU_DDR_PHY_RDIMMGCR0_SOPERR                                                    0x0

		Parity Error No Registering
		PSU_DDR_PHY_RDIMMGCR0_ERRNOREG                                                  0x0

		Registered DIMM
		PSU_DDR_PHY_RDIMMGCR0_RDIMM                                                     0x0

		RDIMM General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080140, 0xFFFFFFFFU ,0x08400020U)  
		RegMask = (DDR_PHY_RDIMMGCR0_RESERVED_31_MASK | DDR_PHY_RDIMMGCR0_QCSEN_MASK | DDR_PHY_RDIMMGCR0_RESERVED_29_28_MASK | DDR_PHY_RDIMMGCR0_RDIMMIOM_MASK | DDR_PHY_RDIMMGCR0_RESERVED_26_24_MASK | DDR_PHY_RDIMMGCR0_ERROUTOE_MASK | DDR_PHY_RDIMMGCR0_ERROUTIOM_MASK | DDR_PHY_RDIMMGCR0_ERROUTPDR_MASK | DDR_PHY_RDIMMGCR0_RESERVED_20_MASK | DDR_PHY_RDIMMGCR0_ERROUTODT_MASK | DDR_PHY_RDIMMGCR0_LRDIMM_MASK | DDR_PHY_RDIMMGCR0_PARINIOM_MASK | DDR_PHY_RDIMMGCR0_RESERVED_16_8_MASK | DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_MASK | DDR_PHY_RDIMMGCR0_RNKMRREN_MASK | DDR_PHY_RDIMMGCR0_RESERVED_3_MASK | DDR_PHY_RDIMMGCR0_SOPERR_MASK | DDR_PHY_RDIMMGCR0_ERRNOREG_MASK | DDR_PHY_RDIMMGCR0_RDIMM_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_31_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_QCSEN_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_29_28_SHIFT
			| 0x00000001U << DDR_PHY_RDIMMGCR0_RDIMMIOM_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_26_24_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTOE_SHIFT
			| 0x00000001U << DDR_PHY_RDIMMGCR0_ERROUTIOM_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTPDR_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_20_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERROUTODT_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_LRDIMM_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_PARINIOM_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_16_8_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_RNKMRREN_RSVD_SHIFT
			| 0x00000002U << DDR_PHY_RDIMMGCR0_RNKMRREN_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_RESERVED_3_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_SOPERR_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_ERRNOREG_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR0_RDIMM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_RDIMMGCR0_OFFSET ,0xFFFFFFFFU ,0x08400020U);
	/*############################################################################################################################ */

		/*Register : RDIMMGCR1 @ 0XFD080144</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR1_RESERVED_31_29                                            0x0

		Address [17] B-side Inversion Disable
		PSU_DDR_PHY_RDIMMGCR1_A17BID                                                    0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR1_RESERVED_27                                               0x0

		Command word to command word programming delay
		PSU_DDR_PHY_RDIMMGCR1_TBCMRD_L2                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR1_RESERVED_23                                               0x0

		Command word to command word programming delay
		PSU_DDR_PHY_RDIMMGCR1_TBCMRD_L                                                  0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR1_RESERVED_19                                               0x0

		Command word to command word programming delay
		PSU_DDR_PHY_RDIMMGCR1_TBCMRD                                                    0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RDIMMGCR1_RESERVED_15_14                                            0x0

		Stabilization time
		PSU_DDR_PHY_RDIMMGCR1_TBCSTAB                                                   0xc80

		RDIMM General Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080144, 0xFFFFFFFFU ,0x00000C80U)  
		RegMask = (DDR_PHY_RDIMMGCR1_RESERVED_31_29_MASK | DDR_PHY_RDIMMGCR1_A17BID_MASK | DDR_PHY_RDIMMGCR1_RESERVED_27_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_L2_MASK | DDR_PHY_RDIMMGCR1_RESERVED_23_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_L_MASK | DDR_PHY_RDIMMGCR1_RESERVED_19_MASK | DDR_PHY_RDIMMGCR1_TBCMRD_MASK | DDR_PHY_RDIMMGCR1_RESERVED_15_14_MASK | DDR_PHY_RDIMMGCR1_TBCSTAB_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR1_A17BID_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_27_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_L2_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_23_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_L_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_19_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR1_TBCMRD_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMGCR1_RESERVED_15_14_SHIFT
			| 0x00000C80U << DDR_PHY_RDIMMGCR1_TBCSTAB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_RDIMMGCR1_OFFSET ,0xFFFFFFFFU ,0x00000C80U);
	/*############################################################################################################################ */

		/*Register : RDIMMCR0 @ 0XFD080150</p>

		DDR4/DDR3 Control Word 7
		PSU_DDR_PHY_RDIMMCR0_RC7                                                        0x0

		DDR4 Control Word 6 (Comman space Control Word) / DDR3 Reserved
		PSU_DDR_PHY_RDIMMCR0_RC6                                                        0x0

		DDR4/DDR3 Control Word 5 (CK Driver Characteristics Control Word)
		PSU_DDR_PHY_RDIMMCR0_RC5                                                        0x0

		DDR4 Control Word 4 (ODT and CKE Signals Driver Characteristics Control Word) / DDR3 Control Word 4 (Control Signals Driver C
		aracteristics Control Word)
		PSU_DDR_PHY_RDIMMCR0_RC4                                                        0x0

		DDR4 Control Word 3 (CA and CS Signals Driver Characteristics Control Word) / DDR3 Control Word 3 (Command/Address Signals Dr
		ver Characteristrics Control Word)
		PSU_DDR_PHY_RDIMMCR0_RC3                                                        0x0

		DDR4 Control Word 2 (Timing and IBT Control Word) / DDR3 Control Word 2 (Timing Control Word)
		PSU_DDR_PHY_RDIMMCR0_RC2                                                        0x0

		DDR4/DDR3 Control Word 1 (Clock Driver Enable Control Word)
		PSU_DDR_PHY_RDIMMCR0_RC1                                                        0x0

		DDR4/DDR3 Control Word 0 (Global Features Control Word)
		PSU_DDR_PHY_RDIMMCR0_RC0                                                        0x0

		RDIMM Control Register 0
		(OFFSET, MASK, VALUE)      (0XFD080150, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_RDIMMCR0_RC7_MASK | DDR_PHY_RDIMMCR0_RC6_MASK | DDR_PHY_RDIMMCR0_RC5_MASK | DDR_PHY_RDIMMCR0_RC4_MASK | DDR_PHY_RDIMMCR0_RC3_MASK | DDR_PHY_RDIMMCR0_RC2_MASK | DDR_PHY_RDIMMCR0_RC1_MASK | DDR_PHY_RDIMMCR0_RC0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_RDIMMCR0_RC7_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR0_RC6_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR0_RC5_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR0_RC4_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR0_RC3_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR0_RC2_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR0_RC1_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR0_RC0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_RDIMMCR0_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : RDIMMCR1 @ 0XFD080154</p>

		Control Word 15
		PSU_DDR_PHY_RDIMMCR1_RC15                                                       0x0

		DDR4 Control Word 14 (Parity Control Word) / DDR3 Reserved
		PSU_DDR_PHY_RDIMMCR1_RC14                                                       0x0

		DDR4 Control Word 13 (DIMM Configuration Control Word) / DDR3 Reserved
		PSU_DDR_PHY_RDIMMCR1_RC13                                                       0x0

		DDR4 Control Word 12 (Training Control Word) / DDR3 Reserved
		PSU_DDR_PHY_RDIMMCR1_RC12                                                       0x0

		DDR4 Control Word 11 (Operating Voltage VDD and VREFCA Source Control Word) / DDR3 Control Word 11 (Operation Voltage VDD Con
		rol Word)
		PSU_DDR_PHY_RDIMMCR1_RC11                                                       0x0

		DDR4/DDR3 Control Word 10 (RDIMM Operating Speed Control Word)
		PSU_DDR_PHY_RDIMMCR1_RC10                                                       0x2

		DDR4/DDR3 Control Word 9 (Power Saving Settings Control Word)
		PSU_DDR_PHY_RDIMMCR1_RC9                                                        0x0

		DDR4 Control Word 8 (Input/Output Configuration Control Word) / DDR3 Control Word 8 (Additional Input Bus Termination Setting
		Control Word)
		PSU_DDR_PHY_RDIMMCR1_RC8                                                        0x0

		RDIMM Control Register 1
		(OFFSET, MASK, VALUE)      (0XFD080154, 0xFFFFFFFFU ,0x00000200U)  
		RegMask = (DDR_PHY_RDIMMCR1_RC15_MASK | DDR_PHY_RDIMMCR1_RC14_MASK | DDR_PHY_RDIMMCR1_RC13_MASK | DDR_PHY_RDIMMCR1_RC12_MASK | DDR_PHY_RDIMMCR1_RC11_MASK | DDR_PHY_RDIMMCR1_RC10_MASK | DDR_PHY_RDIMMCR1_RC9_MASK | DDR_PHY_RDIMMCR1_RC8_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_RDIMMCR1_RC15_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR1_RC14_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR1_RC13_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR1_RC12_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR1_RC11_SHIFT
			| 0x00000002U << DDR_PHY_RDIMMCR1_RC10_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR1_RC9_SHIFT
			| 0x00000000U << DDR_PHY_RDIMMCR1_RC8_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_RDIMMCR1_OFFSET ,0xFFFFFFFFU ,0x00000200U);
	/*############################################################################################################################ */

		/*Register : MR0 @ 0XFD080180</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR0_RESERVED_31_8                                                   0x8

		CA Terminating Rank
		PSU_DDR_PHY_MR0_CATR                                                            0x0

		Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR0_RSVD_6_5                                                        0x1

		Built-in Self-Test for RZQ
		PSU_DDR_PHY_MR0_RZQI                                                            0x2

		Reserved. These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR0_RSVD_2_0                                                        0x0

		LPDDR4 Mode Register 0
		(OFFSET, MASK, VALUE)      (0XFD080180, 0xFFFFFFFFU ,0x00000830U)  
		RegMask = (DDR_PHY_MR0_RESERVED_31_8_MASK | DDR_PHY_MR0_CATR_MASK | DDR_PHY_MR0_RSVD_6_5_MASK | DDR_PHY_MR0_RZQI_MASK | DDR_PHY_MR0_RSVD_2_0_MASK |  0 );

		RegVal = ((0x00000008U << DDR_PHY_MR0_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR0_CATR_SHIFT
			| 0x00000001U << DDR_PHY_MR0_RSVD_6_5_SHIFT
			| 0x00000002U << DDR_PHY_MR0_RZQI_SHIFT
			| 0x00000000U << DDR_PHY_MR0_RSVD_2_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR0_OFFSET ,0xFFFFFFFFU ,0x00000830U);
	/*############################################################################################################################ */

		/*Register : MR1 @ 0XFD080184</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR1_RESERVED_31_8                                                   0x3

		Read Postamble Length
		PSU_DDR_PHY_MR1_RDPST                                                           0x0

		Write-recovery for auto-precharge command
		PSU_DDR_PHY_MR1_NWR                                                             0x0

		Read Preamble Length
		PSU_DDR_PHY_MR1_RDPRE                                                           0x0

		Write Preamble Length
		PSU_DDR_PHY_MR1_WRPRE                                                           0x0

		Burst Length
		PSU_DDR_PHY_MR1_BL                                                              0x1

		LPDDR4 Mode Register 1
		(OFFSET, MASK, VALUE)      (0XFD080184, 0xFFFFFFFFU ,0x00000301U)  
		RegMask = (DDR_PHY_MR1_RESERVED_31_8_MASK | DDR_PHY_MR1_RDPST_MASK | DDR_PHY_MR1_NWR_MASK | DDR_PHY_MR1_RDPRE_MASK | DDR_PHY_MR1_WRPRE_MASK | DDR_PHY_MR1_BL_MASK |  0 );

		RegVal = ((0x00000003U << DDR_PHY_MR1_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR1_RDPST_SHIFT
			| 0x00000000U << DDR_PHY_MR1_NWR_SHIFT
			| 0x00000000U << DDR_PHY_MR1_RDPRE_SHIFT
			| 0x00000000U << DDR_PHY_MR1_WRPRE_SHIFT
			| 0x00000001U << DDR_PHY_MR1_BL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR1_OFFSET ,0xFFFFFFFFU ,0x00000301U);
	/*############################################################################################################################ */

		/*Register : MR2 @ 0XFD080188</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR2_RESERVED_31_8                                                   0x0

		Write Leveling
		PSU_DDR_PHY_MR2_WRL                                                             0x0

		Write Latency Set
		PSU_DDR_PHY_MR2_WLS                                                             0x0

		Write Latency
		PSU_DDR_PHY_MR2_WL                                                              0x4

		Read Latency
		PSU_DDR_PHY_MR2_RL                                                              0x0

		LPDDR4 Mode Register 2
		(OFFSET, MASK, VALUE)      (0XFD080188, 0xFFFFFFFFU ,0x00000020U)  
		RegMask = (DDR_PHY_MR2_RESERVED_31_8_MASK | DDR_PHY_MR2_WRL_MASK | DDR_PHY_MR2_WLS_MASK | DDR_PHY_MR2_WL_MASK | DDR_PHY_MR2_RL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR2_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR2_WRL_SHIFT
			| 0x00000000U << DDR_PHY_MR2_WLS_SHIFT
			| 0x00000004U << DDR_PHY_MR2_WL_SHIFT
			| 0x00000000U << DDR_PHY_MR2_RL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR2_OFFSET ,0xFFFFFFFFU ,0x00000020U);
	/*############################################################################################################################ */

		/*Register : MR3 @ 0XFD08018C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR3_RESERVED_31_8                                                   0x2

		DBI-Write Enable
		PSU_DDR_PHY_MR3_DBIWR                                                           0x0

		DBI-Read Enable
		PSU_DDR_PHY_MR3_DBIRD                                                           0x0

		Pull-down Drive Strength
		PSU_DDR_PHY_MR3_PDDS                                                            0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR3_RSVD                                                            0x0

		Write Postamble Length
		PSU_DDR_PHY_MR3_WRPST                                                           0x0

		Pull-up Calibration Point
		PSU_DDR_PHY_MR3_PUCAL                                                           0x0

		LPDDR4 Mode Register 3
		(OFFSET, MASK, VALUE)      (0XFD08018C, 0xFFFFFFFFU ,0x00000200U)  
		RegMask = (DDR_PHY_MR3_RESERVED_31_8_MASK | DDR_PHY_MR3_DBIWR_MASK | DDR_PHY_MR3_DBIRD_MASK | DDR_PHY_MR3_PDDS_MASK | DDR_PHY_MR3_RSVD_MASK | DDR_PHY_MR3_WRPST_MASK | DDR_PHY_MR3_PUCAL_MASK |  0 );

		RegVal = ((0x00000002U << DDR_PHY_MR3_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR3_DBIWR_SHIFT
			| 0x00000000U << DDR_PHY_MR3_DBIRD_SHIFT
			| 0x00000000U << DDR_PHY_MR3_PDDS_SHIFT
			| 0x00000000U << DDR_PHY_MR3_RSVD_SHIFT
			| 0x00000000U << DDR_PHY_MR3_WRPST_SHIFT
			| 0x00000000U << DDR_PHY_MR3_PUCAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR3_OFFSET ,0xFFFFFFFFU ,0x00000200U);
	/*############################################################################################################################ */

		/*Register : MR4 @ 0XFD080190</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR4_RESERVED_31_16                                                  0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR4_RSVD_15_13                                                      0x0

		Write Preamble
		PSU_DDR_PHY_MR4_WRP                                                             0x0

		Read Preamble
		PSU_DDR_PHY_MR4_RDP                                                             0x0

		Read Preamble Training Mode
		PSU_DDR_PHY_MR4_RPTM                                                            0x0

		Self Refresh Abort
		PSU_DDR_PHY_MR4_SRA                                                             0x0

		CS to Command Latency Mode
		PSU_DDR_PHY_MR4_CS2CMDL                                                         0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR4_RSVD1                                                           0x0

		Internal VREF Monitor
		PSU_DDR_PHY_MR4_IVM                                                             0x0

		Temperature Controlled Refresh Mode
		PSU_DDR_PHY_MR4_TCRM                                                            0x0

		Temperature Controlled Refresh Range
		PSU_DDR_PHY_MR4_TCRR                                                            0x0

		Maximum Power Down Mode
		PSU_DDR_PHY_MR4_MPDM                                                            0x0

		This is a JEDEC reserved bit and is recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR4_RSVD_0                                                          0x0

		DDR4 Mode Register 4
		(OFFSET, MASK, VALUE)      (0XFD080190, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_MR4_RESERVED_31_16_MASK | DDR_PHY_MR4_RSVD_15_13_MASK | DDR_PHY_MR4_WRP_MASK | DDR_PHY_MR4_RDP_MASK | DDR_PHY_MR4_RPTM_MASK | DDR_PHY_MR4_SRA_MASK | DDR_PHY_MR4_CS2CMDL_MASK | DDR_PHY_MR4_RSVD1_MASK | DDR_PHY_MR4_IVM_MASK | DDR_PHY_MR4_TCRM_MASK | DDR_PHY_MR4_TCRR_MASK | DDR_PHY_MR4_MPDM_MASK | DDR_PHY_MR4_RSVD_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR4_RESERVED_31_16_SHIFT
			| 0x00000000U << DDR_PHY_MR4_RSVD_15_13_SHIFT
			| 0x00000000U << DDR_PHY_MR4_WRP_SHIFT
			| 0x00000000U << DDR_PHY_MR4_RDP_SHIFT
			| 0x00000000U << DDR_PHY_MR4_RPTM_SHIFT
			| 0x00000000U << DDR_PHY_MR4_SRA_SHIFT
			| 0x00000000U << DDR_PHY_MR4_CS2CMDL_SHIFT
			| 0x00000000U << DDR_PHY_MR4_RSVD1_SHIFT
			| 0x00000000U << DDR_PHY_MR4_IVM_SHIFT
			| 0x00000000U << DDR_PHY_MR4_TCRM_SHIFT
			| 0x00000000U << DDR_PHY_MR4_TCRR_SHIFT
			| 0x00000000U << DDR_PHY_MR4_MPDM_SHIFT
			| 0x00000000U << DDR_PHY_MR4_RSVD_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR4_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MR5 @ 0XFD080194</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR5_RESERVED_31_16                                                  0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR5_RSVD                                                            0x0

		Read DBI
		PSU_DDR_PHY_MR5_RDBI                                                            0x0

		Write DBI
		PSU_DDR_PHY_MR5_WDBI                                                            0x0

		Data Mask
		PSU_DDR_PHY_MR5_DM                                                              0x1

		CA Parity Persistent Error
		PSU_DDR_PHY_MR5_CAPPE                                                           0x1

		RTT_PARK
		PSU_DDR_PHY_MR5_RTTPARK                                                         0x3

		ODT Input Buffer during Power Down mode
		PSU_DDR_PHY_MR5_ODTIBPD                                                         0x0

		C/A Parity Error Status
		PSU_DDR_PHY_MR5_CAPES                                                           0x0

		CRC Error Clear
		PSU_DDR_PHY_MR5_CRCEC                                                           0x0

		C/A Parity Latency Mode
		PSU_DDR_PHY_MR5_CAPM                                                            0x0

		DDR4 Mode Register 5
		(OFFSET, MASK, VALUE)      (0XFD080194, 0xFFFFFFFFU ,0x000006C0U)  
		RegMask = (DDR_PHY_MR5_RESERVED_31_16_MASK | DDR_PHY_MR5_RSVD_MASK | DDR_PHY_MR5_RDBI_MASK | DDR_PHY_MR5_WDBI_MASK | DDR_PHY_MR5_DM_MASK | DDR_PHY_MR5_CAPPE_MASK | DDR_PHY_MR5_RTTPARK_MASK | DDR_PHY_MR5_ODTIBPD_MASK | DDR_PHY_MR5_CAPES_MASK | DDR_PHY_MR5_CRCEC_MASK | DDR_PHY_MR5_CAPM_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR5_RESERVED_31_16_SHIFT
			| 0x00000000U << DDR_PHY_MR5_RSVD_SHIFT
			| 0x00000000U << DDR_PHY_MR5_RDBI_SHIFT
			| 0x00000000U << DDR_PHY_MR5_WDBI_SHIFT
			| 0x00000001U << DDR_PHY_MR5_DM_SHIFT
			| 0x00000001U << DDR_PHY_MR5_CAPPE_SHIFT
			| 0x00000003U << DDR_PHY_MR5_RTTPARK_SHIFT
			| 0x00000000U << DDR_PHY_MR5_ODTIBPD_SHIFT
			| 0x00000000U << DDR_PHY_MR5_CAPES_SHIFT
			| 0x00000000U << DDR_PHY_MR5_CRCEC_SHIFT
			| 0x00000000U << DDR_PHY_MR5_CAPM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR5_OFFSET ,0xFFFFFFFFU ,0x000006C0U);
	/*############################################################################################################################ */

		/*Register : MR6 @ 0XFD080198</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR6_RESERVED_31_16                                                  0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR6_RSVD_15_13                                                      0x0

		CAS_n to CAS_n command delay for same bank group (tCCD_L)
		PSU_DDR_PHY_MR6_TCCDL                                                           0x2

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR6_RSVD_9_8                                                        0x0

		VrefDQ Training Enable
		PSU_DDR_PHY_MR6_VDDQTEN                                                         0x0

		VrefDQ Training Range
		PSU_DDR_PHY_MR6_VDQTRG                                                          0x0

		VrefDQ Training Values
		PSU_DDR_PHY_MR6_VDQTVAL                                                         0x19

		DDR4 Mode Register 6
		(OFFSET, MASK, VALUE)      (0XFD080198, 0xFFFFFFFFU ,0x00000819U)  
		RegMask = (DDR_PHY_MR6_RESERVED_31_16_MASK | DDR_PHY_MR6_RSVD_15_13_MASK | DDR_PHY_MR6_TCCDL_MASK | DDR_PHY_MR6_RSVD_9_8_MASK | DDR_PHY_MR6_VDDQTEN_MASK | DDR_PHY_MR6_VDQTRG_MASK | DDR_PHY_MR6_VDQTVAL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR6_RESERVED_31_16_SHIFT
			| 0x00000000U << DDR_PHY_MR6_RSVD_15_13_SHIFT
			| 0x00000002U << DDR_PHY_MR6_TCCDL_SHIFT
			| 0x00000000U << DDR_PHY_MR6_RSVD_9_8_SHIFT
			| 0x00000000U << DDR_PHY_MR6_VDDQTEN_SHIFT
			| 0x00000000U << DDR_PHY_MR6_VDQTRG_SHIFT
			| 0x00000019U << DDR_PHY_MR6_VDQTVAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR6_OFFSET ,0xFFFFFFFFU ,0x00000819U);
	/*############################################################################################################################ */

		/*Register : MR11 @ 0XFD0801AC</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR11_RESERVED_31_8                                                  0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR11_RSVD                                                           0x0

		Power Down Control
		PSU_DDR_PHY_MR11_PDCTL                                                          0x0

		DQ Bus Receiver On-Die-Termination
		PSU_DDR_PHY_MR11_DQODT                                                          0x0

		LPDDR4 Mode Register 11
		(OFFSET, MASK, VALUE)      (0XFD0801AC, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_MR11_RESERVED_31_8_MASK | DDR_PHY_MR11_RSVD_MASK | DDR_PHY_MR11_PDCTL_MASK | DDR_PHY_MR11_DQODT_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR11_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR11_RSVD_SHIFT
			| 0x00000000U << DDR_PHY_MR11_PDCTL_SHIFT
			| 0x00000000U << DDR_PHY_MR11_DQODT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR11_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MR12 @ 0XFD0801B0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR12_RESERVED_31_8                                                  0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR12_RSVD                                                           0x0

		VREF_CA Range Select.
		PSU_DDR_PHY_MR12_VR_CA                                                          0x1

		Controls the VREF(ca) levels for Frequency-Set-Point[1:0].
		PSU_DDR_PHY_MR12_VREF_CA                                                        0xd

		LPDDR4 Mode Register 12
		(OFFSET, MASK, VALUE)      (0XFD0801B0, 0xFFFFFFFFU ,0x0000004DU)  
		RegMask = (DDR_PHY_MR12_RESERVED_31_8_MASK | DDR_PHY_MR12_RSVD_MASK | DDR_PHY_MR12_VR_CA_MASK | DDR_PHY_MR12_VREF_CA_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR12_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR12_RSVD_SHIFT
			| 0x00000001U << DDR_PHY_MR12_VR_CA_SHIFT
			| 0x0000000DU << DDR_PHY_MR12_VREF_CA_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR12_OFFSET ,0xFFFFFFFFU ,0x0000004DU);
	/*############################################################################################################################ */

		/*Register : MR13 @ 0XFD0801B4</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR13_RESERVED_31_8                                                  0x0

		Frequency Set Point Operation Mode
		PSU_DDR_PHY_MR13_FSPOP                                                          0x0

		Frequency Set Point Write Enable
		PSU_DDR_PHY_MR13_FSPWR                                                          0x0

		Data Mask Enable
		PSU_DDR_PHY_MR13_DMD                                                            0x0

		Refresh Rate Option
		PSU_DDR_PHY_MR13_RRO                                                            0x0

		VREF Current Generator
		PSU_DDR_PHY_MR13_VRCG                                                           0x1

		VREF Output
		PSU_DDR_PHY_MR13_VRO                                                            0x0

		Read Preamble Training Mode
		PSU_DDR_PHY_MR13_RPT                                                            0x0

		Command Bus Training
		PSU_DDR_PHY_MR13_CBT                                                            0x0

		LPDDR4 Mode Register 13
		(OFFSET, MASK, VALUE)      (0XFD0801B4, 0xFFFFFFFFU ,0x00000008U)  
		RegMask = (DDR_PHY_MR13_RESERVED_31_8_MASK | DDR_PHY_MR13_FSPOP_MASK | DDR_PHY_MR13_FSPWR_MASK | DDR_PHY_MR13_DMD_MASK | DDR_PHY_MR13_RRO_MASK | DDR_PHY_MR13_VRCG_MASK | DDR_PHY_MR13_VRO_MASK | DDR_PHY_MR13_RPT_MASK | DDR_PHY_MR13_CBT_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR13_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR13_FSPOP_SHIFT
			| 0x00000000U << DDR_PHY_MR13_FSPWR_SHIFT
			| 0x00000000U << DDR_PHY_MR13_DMD_SHIFT
			| 0x00000000U << DDR_PHY_MR13_RRO_SHIFT
			| 0x00000001U << DDR_PHY_MR13_VRCG_SHIFT
			| 0x00000000U << DDR_PHY_MR13_VRO_SHIFT
			| 0x00000000U << DDR_PHY_MR13_RPT_SHIFT
			| 0x00000000U << DDR_PHY_MR13_CBT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR13_OFFSET ,0xFFFFFFFFU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : MR14 @ 0XFD0801B8</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR14_RESERVED_31_8                                                  0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR14_RSVD                                                           0x0

		VREFDQ Range Selects.
		PSU_DDR_PHY_MR14_VR_DQ                                                          0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR14_VREF_DQ                                                        0xd

		LPDDR4 Mode Register 14
		(OFFSET, MASK, VALUE)      (0XFD0801B8, 0xFFFFFFFFU ,0x0000004DU)  
		RegMask = (DDR_PHY_MR14_RESERVED_31_8_MASK | DDR_PHY_MR14_RSVD_MASK | DDR_PHY_MR14_VR_DQ_MASK | DDR_PHY_MR14_VREF_DQ_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR14_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR14_RSVD_SHIFT
			| 0x00000001U << DDR_PHY_MR14_VR_DQ_SHIFT
			| 0x0000000DU << DDR_PHY_MR14_VREF_DQ_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR14_OFFSET ,0xFFFFFFFFU ,0x0000004DU);
	/*############################################################################################################################ */

		/*Register : MR22 @ 0XFD0801D8</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_MR22_RESERVED_31_8                                                  0x0

		These are JEDEC reserved bits and are recommended by JEDEC to be programmed to 0x0.
		PSU_DDR_PHY_MR22_RSVD                                                           0x0

		CA ODT termination disable.
		PSU_DDR_PHY_MR22_ODTD_CA                                                        0x0

		ODT CS override.
		PSU_DDR_PHY_MR22_ODTE_CS                                                        0x0

		ODT CK override.
		PSU_DDR_PHY_MR22_ODTE_CK                                                        0x0

		Controller ODT value for VOH calibration.
		PSU_DDR_PHY_MR22_CODT                                                           0x0

		LPDDR4 Mode Register 22
		(OFFSET, MASK, VALUE)      (0XFD0801D8, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_MR22_RESERVED_31_8_MASK | DDR_PHY_MR22_RSVD_MASK | DDR_PHY_MR22_ODTD_CA_MASK | DDR_PHY_MR22_ODTE_CS_MASK | DDR_PHY_MR22_ODTE_CK_MASK | DDR_PHY_MR22_CODT_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_MR22_RESERVED_31_8_SHIFT
			| 0x00000000U << DDR_PHY_MR22_RSVD_SHIFT
			| 0x00000000U << DDR_PHY_MR22_ODTD_CA_SHIFT
			| 0x00000000U << DDR_PHY_MR22_ODTE_CS_SHIFT
			| 0x00000000U << DDR_PHY_MR22_ODTE_CK_SHIFT
			| 0x00000000U << DDR_PHY_MR22_CODT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_MR22_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DTCR0 @ 0XFD080200</p>

		Refresh During Training
		PSU_DDR_PHY_DTCR0_RFSHDT                                                        0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTCR0_RESERVED_27_26                                                0x0

		Data Training Debug Rank Select
		PSU_DDR_PHY_DTCR0_DTDRS                                                         0x0

		Data Training with Early/Extended Gate
		PSU_DDR_PHY_DTCR0_DTEXG                                                         0x0

		Data Training Extended Write DQS
		PSU_DDR_PHY_DTCR0_DTEXD                                                         0x0

		Data Training Debug Step
		PSU_DDR_PHY_DTCR0_DTDSTP                                                        0x0

		Data Training Debug Enable
		PSU_DDR_PHY_DTCR0_DTDEN                                                         0x0

		Data Training Debug Byte Select
		PSU_DDR_PHY_DTCR0_DTDBS                                                         0x0

		Data Training read DBI deskewing configuration
		PSU_DDR_PHY_DTCR0_DTRDBITR                                                      0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTCR0_RESERVED_13                                                   0x0

		Data Training Write Bit Deskew Data Mask
		PSU_DDR_PHY_DTCR0_DTWBDDM                                                       0x1

		Refreshes Issued During Entry to Training
		PSU_DDR_PHY_DTCR0_RFSHEN                                                        0x1

		Data Training Compare Data
		PSU_DDR_PHY_DTCR0_DTCMPD                                                        0x1

		Data Training Using MPR
		PSU_DDR_PHY_DTCR0_DTMPR                                                         0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTCR0_RESERVED_5_4                                                  0x0

		Data Training Repeat Number
		PSU_DDR_PHY_DTCR0_DTRPTN                                                        0x7

		Data Training Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080200, 0xFFFFFFFFU ,0x800091C7U)  
		RegMask = (DDR_PHY_DTCR0_RFSHDT_MASK | DDR_PHY_DTCR0_RESERVED_27_26_MASK | DDR_PHY_DTCR0_DTDRS_MASK | DDR_PHY_DTCR0_DTEXG_MASK | DDR_PHY_DTCR0_DTEXD_MASK | DDR_PHY_DTCR0_DTDSTP_MASK | DDR_PHY_DTCR0_DTDEN_MASK | DDR_PHY_DTCR0_DTDBS_MASK | DDR_PHY_DTCR0_DTRDBITR_MASK | DDR_PHY_DTCR0_RESERVED_13_MASK | DDR_PHY_DTCR0_DTWBDDM_MASK | DDR_PHY_DTCR0_RFSHEN_MASK | DDR_PHY_DTCR0_DTCMPD_MASK | DDR_PHY_DTCR0_DTMPR_MASK | DDR_PHY_DTCR0_RESERVED_5_4_MASK | DDR_PHY_DTCR0_DTRPTN_MASK |  0 );

		RegVal = ((0x00000008U << DDR_PHY_DTCR0_RFSHDT_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_27_26_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_DTDRS_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_DTEXG_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_DTEXD_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_DTDSTP_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_DTDEN_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_DTDBS_SHIFT
			| 0x00000002U << DDR_PHY_DTCR0_DTRDBITR_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_13_SHIFT
			| 0x00000001U << DDR_PHY_DTCR0_DTWBDDM_SHIFT
			| 0x00000001U << DDR_PHY_DTCR0_RFSHEN_SHIFT
			| 0x00000001U << DDR_PHY_DTCR0_DTCMPD_SHIFT
			| 0x00000001U << DDR_PHY_DTCR0_DTMPR_SHIFT
			| 0x00000000U << DDR_PHY_DTCR0_RESERVED_5_4_SHIFT
			| 0x00000007U << DDR_PHY_DTCR0_DTRPTN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTCR0_OFFSET ,0xFFFFFFFFU ,0x800091C7U);
	/*############################################################################################################################ */

		/*Register : DTCR1 @ 0XFD080204</p>

		Rank Enable.
		PSU_DDR_PHY_DTCR1_RANKEN_RSVD                                                   0x0

		Rank Enable.
		PSU_DDR_PHY_DTCR1_RANKEN                                                        0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTCR1_RESERVED_15_14                                                0x0

		Data Training Rank
		PSU_DDR_PHY_DTCR1_DTRANK                                                        0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTCR1_RESERVED_11                                                   0x0

		Read Leveling Gate Sampling Difference
		PSU_DDR_PHY_DTCR1_RDLVLGDIFF                                                    0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTCR1_RESERVED_7                                                    0x0

		Read Leveling Gate Shift
		PSU_DDR_PHY_DTCR1_RDLVLGS                                                       0x3

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DTCR1_RESERVED_3                                                    0x0

		Read Preamble Training enable
		PSU_DDR_PHY_DTCR1_RDPRMVL_TRN                                                   0x1

		Read Leveling Enable
		PSU_DDR_PHY_DTCR1_RDLVLEN                                                       0x1

		Basic Gate Training Enable
		PSU_DDR_PHY_DTCR1_BSTEN                                                         0x0

		Data Training Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080204, 0xFFFFFFFFU ,0x00010236U)  
		RegMask = (DDR_PHY_DTCR1_RANKEN_RSVD_MASK | DDR_PHY_DTCR1_RANKEN_MASK | DDR_PHY_DTCR1_RESERVED_15_14_MASK | DDR_PHY_DTCR1_DTRANK_MASK | DDR_PHY_DTCR1_RESERVED_11_MASK | DDR_PHY_DTCR1_RDLVLGDIFF_MASK | DDR_PHY_DTCR1_RESERVED_7_MASK | DDR_PHY_DTCR1_RDLVLGS_MASK | DDR_PHY_DTCR1_RESERVED_3_MASK | DDR_PHY_DTCR1_RDPRMVL_TRN_MASK | DDR_PHY_DTCR1_RDLVLEN_MASK | DDR_PHY_DTCR1_BSTEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DTCR1_RANKEN_RSVD_SHIFT
			| 0x00000001U << DDR_PHY_DTCR1_RANKEN_SHIFT
			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_15_14_SHIFT
			| 0x00000000U << DDR_PHY_DTCR1_DTRANK_SHIFT
			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_11_SHIFT
			| 0x00000002U << DDR_PHY_DTCR1_RDLVLGDIFF_SHIFT
			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_7_SHIFT
			| 0x00000003U << DDR_PHY_DTCR1_RDLVLGS_SHIFT
			| 0x00000000U << DDR_PHY_DTCR1_RESERVED_3_SHIFT
			| 0x00000001U << DDR_PHY_DTCR1_RDPRMVL_TRN_SHIFT
			| 0x00000001U << DDR_PHY_DTCR1_RDLVLEN_SHIFT
			| 0x00000000U << DDR_PHY_DTCR1_BSTEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DTCR1_OFFSET ,0xFFFFFFFFU ,0x00010236U);
	/*############################################################################################################################ */

		/*Register : CATR0 @ 0XFD080240</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_CATR0_RESERVED_31_21                                                0x0

		Minimum time (in terms of number of dram clocks) between two consectuve CA calibration command
		PSU_DDR_PHY_CATR0_CACD                                                          0x14

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_CATR0_RESERVED_15_13                                                0x0

		Minimum time (in terms of number of dram clocks) PUB should wait before sampling the CA response after Calibration command ha
		 been sent to the memory
		PSU_DDR_PHY_CATR0_CAADR                                                         0x10

		CA_1 Response Byte Lane 1
		PSU_DDR_PHY_CATR0_CA1BYTE1                                                      0x5

		CA_1 Response Byte Lane 0
		PSU_DDR_PHY_CATR0_CA1BYTE0                                                      0x4

		CA Training Register 0
		(OFFSET, MASK, VALUE)      (0XFD080240, 0xFFFFFFFFU ,0x00141054U)  
		RegMask = (DDR_PHY_CATR0_RESERVED_31_21_MASK | DDR_PHY_CATR0_CACD_MASK | DDR_PHY_CATR0_RESERVED_15_13_MASK | DDR_PHY_CATR0_CAADR_MASK | DDR_PHY_CATR0_CA1BYTE1_MASK | DDR_PHY_CATR0_CA1BYTE0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_CATR0_RESERVED_31_21_SHIFT
			| 0x00000014U << DDR_PHY_CATR0_CACD_SHIFT
			| 0x00000000U << DDR_PHY_CATR0_RESERVED_15_13_SHIFT
			| 0x00000010U << DDR_PHY_CATR0_CAADR_SHIFT
			| 0x00000005U << DDR_PHY_CATR0_CA1BYTE1_SHIFT
			| 0x00000004U << DDR_PHY_CATR0_CA1BYTE0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_CATR0_OFFSET ,0xFFFFFFFFU ,0x00141054U);
	/*############################################################################################################################ */

		/*Register : BISTLSR @ 0XFD080414</p>

		LFSR seed for pseudo-random BIST patterns
		PSU_DDR_PHY_BISTLSR_SEED                                                        0x12341000

		BIST LFSR Seed Register
		(OFFSET, MASK, VALUE)      (0XFD080414, 0xFFFFFFFFU ,0x12341000U)  
		RegMask = (DDR_PHY_BISTLSR_SEED_MASK |  0 );

		RegVal = ((0x12341000U << DDR_PHY_BISTLSR_SEED_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_BISTLSR_OFFSET ,0xFFFFFFFFU ,0x12341000U);
	/*############################################################################################################################ */

		/*Register : RIOCR5 @ 0XFD0804F4</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_RIOCR5_RESERVED_31_16                                               0x0

		Reserved. Return zeros on reads.
		PSU_DDR_PHY_RIOCR5_ODTOEMODE_RSVD                                               0x0

		SDRAM On-die Termination Output Enable (OE) Mode Selection.
		PSU_DDR_PHY_RIOCR5_ODTOEMODE                                                    0x5

		Rank I/O Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD0804F4, 0xFFFFFFFFU ,0x00000005U)  
		RegMask = (DDR_PHY_RIOCR5_RESERVED_31_16_MASK | DDR_PHY_RIOCR5_ODTOEMODE_RSVD_MASK | DDR_PHY_RIOCR5_ODTOEMODE_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_RIOCR5_RESERVED_31_16_SHIFT
			| 0x00000000U << DDR_PHY_RIOCR5_ODTOEMODE_RSVD_SHIFT
			| 0x00000005U << DDR_PHY_RIOCR5_ODTOEMODE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_RIOCR5_OFFSET ,0xFFFFFFFFU ,0x00000005U);
	/*############################################################################################################################ */

		/*Register : ACIOCR0 @ 0XFD080500</p>

		Address/Command Slew Rate (D3F I/O Only)
		PSU_DDR_PHY_ACIOCR0_ACSR                                                        0x0

		SDRAM Reset I/O Mode
		PSU_DDR_PHY_ACIOCR0_RSTIOM                                                      0x1

		SDRAM Reset Power Down Receiver
		PSU_DDR_PHY_ACIOCR0_RSTPDR                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACIOCR0_RESERVED_27                                                 0x0

		SDRAM Reset On-Die Termination
		PSU_DDR_PHY_ACIOCR0_RSTODT                                                      0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACIOCR0_RESERVED_25_10                                              0x0

		CK Duty Cycle Correction
		PSU_DDR_PHY_ACIOCR0_CKDCC                                                       0x0

		AC Power Down Receiver Mode
		PSU_DDR_PHY_ACIOCR0_ACPDRMODE                                                   0x2

		AC On-die Termination Mode
		PSU_DDR_PHY_ACIOCR0_ACODTMODE                                                   0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACIOCR0_RESERVED_1                                                  0x0

		Control delayed or non-delayed clock to CS_N/ODT?CKE AC slices.
		PSU_DDR_PHY_ACIOCR0_ACRANKCLKSEL                                                0x0

		AC I/O Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080500, 0xFFFFFFFFU ,0x30000028U)  
		RegMask = (DDR_PHY_ACIOCR0_ACSR_MASK | DDR_PHY_ACIOCR0_RSTIOM_MASK | DDR_PHY_ACIOCR0_RSTPDR_MASK | DDR_PHY_ACIOCR0_RESERVED_27_MASK | DDR_PHY_ACIOCR0_RSTODT_MASK | DDR_PHY_ACIOCR0_RESERVED_25_10_MASK | DDR_PHY_ACIOCR0_CKDCC_MASK | DDR_PHY_ACIOCR0_ACPDRMODE_MASK | DDR_PHY_ACIOCR0_ACODTMODE_MASK | DDR_PHY_ACIOCR0_RESERVED_1_MASK | DDR_PHY_ACIOCR0_ACRANKCLKSEL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACIOCR0_ACSR_SHIFT
			| 0x00000001U << DDR_PHY_ACIOCR0_RSTIOM_SHIFT
			| 0x00000001U << DDR_PHY_ACIOCR0_RSTPDR_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_27_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR0_RSTODT_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_25_10_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR0_CKDCC_SHIFT
			| 0x00000002U << DDR_PHY_ACIOCR0_ACPDRMODE_SHIFT
			| 0x00000002U << DDR_PHY_ACIOCR0_ACODTMODE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR0_RESERVED_1_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR0_ACRANKCLKSEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACIOCR0_OFFSET ,0xFFFFFFFFU ,0x30000028U);
	/*############################################################################################################################ */

		/*Register : ACIOCR2 @ 0XFD080508</p>

		Clock gating for glue logic inside CLKGEN and glue logic inside CONTROL slice
		PSU_DDR_PHY_ACIOCR2_CLKGENCLKGATE                                               0x0

		Clock gating for Output Enable D slices [0]
		PSU_DDR_PHY_ACIOCR2_ACOECLKGATE0                                                0x0

		Clock gating for Power Down Receiver D slices [0]
		PSU_DDR_PHY_ACIOCR2_ACPDRCLKGATE0                                               0x0

		Clock gating for Termination Enable D slices [0]
		PSU_DDR_PHY_ACIOCR2_ACTECLKGATE0                                                0x0

		Clock gating for CK# D slices [1:0]
		PSU_DDR_PHY_ACIOCR2_CKNCLKGATE0                                                 0x2

		Clock gating for CK D slices [1:0]
		PSU_DDR_PHY_ACIOCR2_CKCLKGATE0                                                  0x2

		Clock gating for AC D slices [23:0]
		PSU_DDR_PHY_ACIOCR2_ACCLKGATE0                                                  0x0

		AC I/O Configuration Register 2
		(OFFSET, MASK, VALUE)      (0XFD080508, 0xFFFFFFFFU ,0x0A000000U)  
		RegMask = (DDR_PHY_ACIOCR2_CLKGENCLKGATE_MASK | DDR_PHY_ACIOCR2_ACOECLKGATE0_MASK | DDR_PHY_ACIOCR2_ACPDRCLKGATE0_MASK | DDR_PHY_ACIOCR2_ACTECLKGATE0_MASK | DDR_PHY_ACIOCR2_CKNCLKGATE0_MASK | DDR_PHY_ACIOCR2_CKCLKGATE0_MASK | DDR_PHY_ACIOCR2_ACCLKGATE0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACIOCR2_CLKGENCLKGATE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR2_ACOECLKGATE0_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR2_ACPDRCLKGATE0_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR2_ACTECLKGATE0_SHIFT
			| 0x00000002U << DDR_PHY_ACIOCR2_CKNCLKGATE0_SHIFT
			| 0x00000002U << DDR_PHY_ACIOCR2_CKCLKGATE0_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR2_ACCLKGATE0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACIOCR2_OFFSET ,0xFFFFFFFFU ,0x0A000000U);
	/*############################################################################################################################ */

		/*Register : ACIOCR3 @ 0XFD08050C</p>

		SDRAM Parity Output Enable (OE) Mode Selection
		PSU_DDR_PHY_ACIOCR3_PAROEMODE                                                   0x0

		SDRAM Bank Group Output Enable (OE) Mode Selection
		PSU_DDR_PHY_ACIOCR3_BGOEMODE                                                    0x0

		SDRAM Bank Address Output Enable (OE) Mode Selection
		PSU_DDR_PHY_ACIOCR3_BAOEMODE                                                    0x0

		SDRAM A[17] Output Enable (OE) Mode Selection
		PSU_DDR_PHY_ACIOCR3_A17OEMODE                                                   0x0

		SDRAM A[16] / RAS_n Output Enable (OE) Mode Selection
		PSU_DDR_PHY_ACIOCR3_A16OEMODE                                                   0x0

		SDRAM ACT_n Output Enable (OE) Mode Selection (DDR4 only)
		PSU_DDR_PHY_ACIOCR3_ACTOEMODE                                                   0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACIOCR3_RESERVED_15_8                                               0x0

		Reserved. Return zeros on reads.
		PSU_DDR_PHY_ACIOCR3_CKOEMODE_RSVD                                               0x0

		SDRAM CK Output Enable (OE) Mode Selection.
		PSU_DDR_PHY_ACIOCR3_CKOEMODE                                                    0x9

		AC I/O Configuration Register 3
		(OFFSET, MASK, VALUE)      (0XFD08050C, 0xFFFFFFFFU ,0x00000009U)  
		RegMask = (DDR_PHY_ACIOCR3_PAROEMODE_MASK | DDR_PHY_ACIOCR3_BGOEMODE_MASK | DDR_PHY_ACIOCR3_BAOEMODE_MASK | DDR_PHY_ACIOCR3_A17OEMODE_MASK | DDR_PHY_ACIOCR3_A16OEMODE_MASK | DDR_PHY_ACIOCR3_ACTOEMODE_MASK | DDR_PHY_ACIOCR3_RESERVED_15_8_MASK | DDR_PHY_ACIOCR3_CKOEMODE_RSVD_MASK | DDR_PHY_ACIOCR3_CKOEMODE_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACIOCR3_PAROEMODE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR3_BGOEMODE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR3_BAOEMODE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR3_A17OEMODE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR3_A16OEMODE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR3_ACTOEMODE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR3_RESERVED_15_8_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR3_CKOEMODE_RSVD_SHIFT
			| 0x00000009U << DDR_PHY_ACIOCR3_CKOEMODE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACIOCR3_OFFSET ,0xFFFFFFFFU ,0x00000009U);
	/*############################################################################################################################ */

		/*Register : ACIOCR4 @ 0XFD080510</p>

		Clock gating for AC LB slices and loopback read valid slices
		PSU_DDR_PHY_ACIOCR4_LBCLKGATE                                                   0x0

		Clock gating for Output Enable D slices [1]
		PSU_DDR_PHY_ACIOCR4_ACOECLKGATE1                                                0x0

		Clock gating for Power Down Receiver D slices [1]
		PSU_DDR_PHY_ACIOCR4_ACPDRCLKGATE1                                               0x0

		Clock gating for Termination Enable D slices [1]
		PSU_DDR_PHY_ACIOCR4_ACTECLKGATE1                                                0x0

		Clock gating for CK# D slices [3:2]
		PSU_DDR_PHY_ACIOCR4_CKNCLKGATE1                                                 0x2

		Clock gating for CK D slices [3:2]
		PSU_DDR_PHY_ACIOCR4_CKCLKGATE1                                                  0x2

		Clock gating for AC D slices [47:24]
		PSU_DDR_PHY_ACIOCR4_ACCLKGATE1                                                  0x0

		AC I/O Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080510, 0xFFFFFFFFU ,0x0A000000U)  
		RegMask = (DDR_PHY_ACIOCR4_LBCLKGATE_MASK | DDR_PHY_ACIOCR4_ACOECLKGATE1_MASK | DDR_PHY_ACIOCR4_ACPDRCLKGATE1_MASK | DDR_PHY_ACIOCR4_ACTECLKGATE1_MASK | DDR_PHY_ACIOCR4_CKNCLKGATE1_MASK | DDR_PHY_ACIOCR4_CKCLKGATE1_MASK | DDR_PHY_ACIOCR4_ACCLKGATE1_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACIOCR4_LBCLKGATE_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR4_ACOECLKGATE1_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR4_ACPDRCLKGATE1_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR4_ACTECLKGATE1_SHIFT
			| 0x00000002U << DDR_PHY_ACIOCR4_CKNCLKGATE1_SHIFT
			| 0x00000002U << DDR_PHY_ACIOCR4_CKCLKGATE1_SHIFT
			| 0x00000000U << DDR_PHY_ACIOCR4_ACCLKGATE1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACIOCR4_OFFSET ,0xFFFFFFFFU ,0x0A000000U);
	/*############################################################################################################################ */

		/*Register : IOVCR0 @ 0XFD080520</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_IOVCR0_RESERVED_31_29                                               0x0

		Address/command lane VREF Pad Enable
		PSU_DDR_PHY_IOVCR0_ACREFPEN                                                     0x0

		Address/command lane Internal VREF Enable
		PSU_DDR_PHY_IOVCR0_ACREFEEN                                                     0x0

		Address/command lane Single-End VREF Enable
		PSU_DDR_PHY_IOVCR0_ACREFSEN                                                     0x1

		Address/command lane Internal VREF Enable
		PSU_DDR_PHY_IOVCR0_ACREFIEN                                                     0x1

		External VREF generato REFSEL range select
		PSU_DDR_PHY_IOVCR0_ACREFESELRANGE                                               0x0

		Address/command lane External VREF Select
		PSU_DDR_PHY_IOVCR0_ACREFESEL                                                    0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_IOVCR0_ACREFSSELRANGE                                               0x1

		Address/command lane Single-End VREF Select
		PSU_DDR_PHY_IOVCR0_ACREFSSEL                                                    0x30

		Internal VREF generator REFSEL ragne select
		PSU_DDR_PHY_IOVCR0_ACVREFISELRANGE                                              0x1

		REFSEL Control for internal AC IOs
		PSU_DDR_PHY_IOVCR0_ACVREFISEL                                                   0x30

		IO VREF Control Register 0
		(OFFSET, MASK, VALUE)      (0XFD080520, 0xFFFFFFFFU ,0x0300B0B0U)  
		RegMask = (DDR_PHY_IOVCR0_RESERVED_31_29_MASK | DDR_PHY_IOVCR0_ACREFPEN_MASK | DDR_PHY_IOVCR0_ACREFEEN_MASK | DDR_PHY_IOVCR0_ACREFSEN_MASK | DDR_PHY_IOVCR0_ACREFIEN_MASK | DDR_PHY_IOVCR0_ACREFESELRANGE_MASK | DDR_PHY_IOVCR0_ACREFESEL_MASK | DDR_PHY_IOVCR0_ACREFSSELRANGE_MASK | DDR_PHY_IOVCR0_ACREFSSEL_MASK | DDR_PHY_IOVCR0_ACVREFISELRANGE_MASK | DDR_PHY_IOVCR0_ACVREFISEL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_IOVCR0_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_IOVCR0_ACREFPEN_SHIFT
			| 0x00000000U << DDR_PHY_IOVCR0_ACREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_IOVCR0_ACREFSEN_SHIFT
			| 0x00000001U << DDR_PHY_IOVCR0_ACREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_IOVCR0_ACREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_IOVCR0_ACREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_IOVCR0_ACREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_IOVCR0_ACREFSSEL_SHIFT
			| 0x00000001U << DDR_PHY_IOVCR0_ACVREFISELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_IOVCR0_ACVREFISEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_IOVCR0_OFFSET ,0xFFFFFFFFU ,0x0300B0B0U);
	/*############################################################################################################################ */

		/*Register : VTCR0 @ 0XFD080528</p>

		Number of ctl_clk required to meet (> 150ns) timing requirements during DRAM DQ VREF training
		PSU_DDR_PHY_VTCR0_TVREF                                                         0x7

		DRM DQ VREF training Enable
		PSU_DDR_PHY_VTCR0_DVEN                                                          0x1

		Per Device Addressability Enable
		PSU_DDR_PHY_VTCR0_PDAEN                                                         0x1

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_VTCR0_RESERVED_26                                                   0x0

		VREF Word Count
		PSU_DDR_PHY_VTCR0_VWCR                                                          0x4

		DRAM DQ VREF step size used during DRAM VREF training
		PSU_DDR_PHY_VTCR0_DVSS                                                          0x0

		Maximum VREF limit value used during DRAM VREF training
		PSU_DDR_PHY_VTCR0_DVMAX                                                         0x32

		Minimum VREF limit value used during DRAM VREF training
		PSU_DDR_PHY_VTCR0_DVMIN                                                         0x0

		Initial DRAM DQ VREF value used during DRAM VREF training
		PSU_DDR_PHY_VTCR0_DVINIT                                                        0x19

		VREF Training Control Register 0
		(OFFSET, MASK, VALUE)      (0XFD080528, 0xFFFFFFFFU ,0xF9032019U)  
		RegMask = (DDR_PHY_VTCR0_TVREF_MASK | DDR_PHY_VTCR0_DVEN_MASK | DDR_PHY_VTCR0_PDAEN_MASK | DDR_PHY_VTCR0_RESERVED_26_MASK | DDR_PHY_VTCR0_VWCR_MASK | DDR_PHY_VTCR0_DVSS_MASK | DDR_PHY_VTCR0_DVMAX_MASK | DDR_PHY_VTCR0_DVMIN_MASK | DDR_PHY_VTCR0_DVINIT_MASK |  0 );

		RegVal = ((0x00000007U << DDR_PHY_VTCR0_TVREF_SHIFT
			| 0x00000001U << DDR_PHY_VTCR0_DVEN_SHIFT
			| 0x00000001U << DDR_PHY_VTCR0_PDAEN_SHIFT
			| 0x00000000U << DDR_PHY_VTCR0_RESERVED_26_SHIFT
			| 0x00000004U << DDR_PHY_VTCR0_VWCR_SHIFT
			| 0x00000000U << DDR_PHY_VTCR0_DVSS_SHIFT
			| 0x00000032U << DDR_PHY_VTCR0_DVMAX_SHIFT
			| 0x00000000U << DDR_PHY_VTCR0_DVMIN_SHIFT
			| 0x00000019U << DDR_PHY_VTCR0_DVINIT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_VTCR0_OFFSET ,0xFFFFFFFFU ,0xF9032019U);
	/*############################################################################################################################ */

		/*Register : VTCR1 @ 0XFD08052C</p>

		Host VREF step size used during VREF training. The register value of N indicates step size of (N+1)
		PSU_DDR_PHY_VTCR1_HVSS                                                          0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_VTCR1_RESERVED_27                                                   0x0

		Maximum VREF limit value used during DRAM VREF training.
		PSU_DDR_PHY_VTCR1_HVMAX                                                         0x7f

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_VTCR1_RESERVED_19                                                   0x0

		Minimum VREF limit value used during DRAM VREF training.
		PSU_DDR_PHY_VTCR1_HVMIN                                                         0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_VTCR1_RESERVED_11                                                   0x0

		Static Host Vref Rank Value
		PSU_DDR_PHY_VTCR1_SHRNK                                                         0x0

		Static Host Vref Rank Enable
		PSU_DDR_PHY_VTCR1_SHREN                                                         0x1

		Number of ctl_clk required to meet (> 200ns) VREF Settling timing requirements during Host IO VREF training
		PSU_DDR_PHY_VTCR1_TVREFIO                                                       0x7

		Eye LCDL Offset value for VREF training
		PSU_DDR_PHY_VTCR1_EOFF                                                          0x0

		Number of LCDL Eye points for which VREF training is repeated
		PSU_DDR_PHY_VTCR1_ENUM                                                          0x0

		HOST (IO) internal VREF training Enable
		PSU_DDR_PHY_VTCR1_HVEN                                                          0x1

		Host IO Type Control
		PSU_DDR_PHY_VTCR1_HVIO                                                          0x1

		VREF Training Control Register 1
		(OFFSET, MASK, VALUE)      (0XFD08052C, 0xFFFFFFFFU ,0x07F001E3U)  
		RegMask = (DDR_PHY_VTCR1_HVSS_MASK | DDR_PHY_VTCR1_RESERVED_27_MASK | DDR_PHY_VTCR1_HVMAX_MASK | DDR_PHY_VTCR1_RESERVED_19_MASK | DDR_PHY_VTCR1_HVMIN_MASK | DDR_PHY_VTCR1_RESERVED_11_MASK | DDR_PHY_VTCR1_SHRNK_MASK | DDR_PHY_VTCR1_SHREN_MASK | DDR_PHY_VTCR1_TVREFIO_MASK | DDR_PHY_VTCR1_EOFF_MASK | DDR_PHY_VTCR1_ENUM_MASK | DDR_PHY_VTCR1_HVEN_MASK | DDR_PHY_VTCR1_HVIO_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_VTCR1_HVSS_SHIFT
			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_27_SHIFT
			| 0x0000007FU << DDR_PHY_VTCR1_HVMAX_SHIFT
			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_19_SHIFT
			| 0x00000000U << DDR_PHY_VTCR1_HVMIN_SHIFT
			| 0x00000000U << DDR_PHY_VTCR1_RESERVED_11_SHIFT
			| 0x00000000U << DDR_PHY_VTCR1_SHRNK_SHIFT
			| 0x00000001U << DDR_PHY_VTCR1_SHREN_SHIFT
			| 0x00000007U << DDR_PHY_VTCR1_TVREFIO_SHIFT
			| 0x00000000U << DDR_PHY_VTCR1_EOFF_SHIFT
			| 0x00000000U << DDR_PHY_VTCR1_ENUM_SHIFT
			| 0x00000001U << DDR_PHY_VTCR1_HVEN_SHIFT
			| 0x00000001U << DDR_PHY_VTCR1_HVIO_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_VTCR1_OFFSET ,0xFFFFFFFFU ,0x07F001E3U);
	/*############################################################################################################################ */

		/*Register : ACBDLR1 @ 0XFD080544</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR1_RESERVED_31_30                                              0x0

		Delay select for the BDL on Parity.
		PSU_DDR_PHY_ACBDLR1_PARBD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR1_RESERVED_23_22                                              0x0

		Delay select for the BDL on Address A[16]. In DDR3 mode this pin is connected to WE.
		PSU_DDR_PHY_ACBDLR1_A16BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR1_RESERVED_15_14                                              0x0

		Delay select for the BDL on Address A[17]. When not in DDR4 modemode this pin is connected to CAS.
		PSU_DDR_PHY_ACBDLR1_A17BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR1_RESERVED_7_6                                                0x0

		Delay select for the BDL on ACTN.
		PSU_DDR_PHY_ACBDLR1_ACTBD                                                       0x0

		AC Bit Delay Line Register 1
		(OFFSET, MASK, VALUE)      (0XFD080544, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_ACBDLR1_RESERVED_31_30_MASK | DDR_PHY_ACBDLR1_PARBD_MASK | DDR_PHY_ACBDLR1_RESERVED_23_22_MASK | DDR_PHY_ACBDLR1_A16BD_MASK | DDR_PHY_ACBDLR1_RESERVED_15_14_MASK | DDR_PHY_ACBDLR1_A17BD_MASK | DDR_PHY_ACBDLR1_RESERVED_7_6_MASK | DDR_PHY_ACBDLR1_ACTBD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACBDLR1_RESERVED_31_30_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR1_PARBD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_23_22_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR1_A16BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_15_14_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR1_A17BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR1_RESERVED_7_6_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR1_ACTBD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACBDLR1_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ACBDLR2 @ 0XFD080548</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR2_RESERVED_31_30                                              0x0

		Delay select for the BDL on BG[1].
		PSU_DDR_PHY_ACBDLR2_BG1BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR2_RESERVED_23_22                                              0x0

		Delay select for the BDL on BG[0].
		PSU_DDR_PHY_ACBDLR2_BG0BD                                                       0x0

		Reser.ved Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR2_RESERVED_15_14                                              0x0

		Delay select for the BDL on BA[1].
		PSU_DDR_PHY_ACBDLR2_BA1BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR2_RESERVED_7_6                                                0x0

		Delay select for the BDL on BA[0].
		PSU_DDR_PHY_ACBDLR2_BA0BD                                                       0x0

		AC Bit Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080548, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_ACBDLR2_RESERVED_31_30_MASK | DDR_PHY_ACBDLR2_BG1BD_MASK | DDR_PHY_ACBDLR2_RESERVED_23_22_MASK | DDR_PHY_ACBDLR2_BG0BD_MASK | DDR_PHY_ACBDLR2_RESERVED_15_14_MASK | DDR_PHY_ACBDLR2_BA1BD_MASK | DDR_PHY_ACBDLR2_RESERVED_7_6_MASK | DDR_PHY_ACBDLR2_BA0BD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACBDLR2_RESERVED_31_30_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR2_BG1BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_23_22_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR2_BG0BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_15_14_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR2_BA1BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR2_RESERVED_7_6_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR2_BA0BD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACBDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ACBDLR6 @ 0XFD080558</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR6_RESERVED_31_30                                              0x0

		Delay select for the BDL on Address A[3].
		PSU_DDR_PHY_ACBDLR6_A03BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR6_RESERVED_23_22                                              0x0

		Delay select for the BDL on Address A[2].
		PSU_DDR_PHY_ACBDLR6_A02BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR6_RESERVED_15_14                                              0x0

		Delay select for the BDL on Address A[1].
		PSU_DDR_PHY_ACBDLR6_A01BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR6_RESERVED_7_6                                                0x0

		Delay select for the BDL on Address A[0].
		PSU_DDR_PHY_ACBDLR6_A00BD                                                       0x0

		AC Bit Delay Line Register 6
		(OFFSET, MASK, VALUE)      (0XFD080558, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_ACBDLR6_RESERVED_31_30_MASK | DDR_PHY_ACBDLR6_A03BD_MASK | DDR_PHY_ACBDLR6_RESERVED_23_22_MASK | DDR_PHY_ACBDLR6_A02BD_MASK | DDR_PHY_ACBDLR6_RESERVED_15_14_MASK | DDR_PHY_ACBDLR6_A01BD_MASK | DDR_PHY_ACBDLR6_RESERVED_7_6_MASK | DDR_PHY_ACBDLR6_A00BD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACBDLR6_RESERVED_31_30_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR6_A03BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_23_22_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR6_A02BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_15_14_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR6_A01BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR6_RESERVED_7_6_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR6_A00BD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACBDLR6_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ACBDLR7 @ 0XFD08055C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR7_RESERVED_31_30                                              0x0

		Delay select for the BDL on Address A[7].
		PSU_DDR_PHY_ACBDLR7_A07BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR7_RESERVED_23_22                                              0x0

		Delay select for the BDL on Address A[6].
		PSU_DDR_PHY_ACBDLR7_A06BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR7_RESERVED_15_14                                              0x0

		Delay select for the BDL on Address A[5].
		PSU_DDR_PHY_ACBDLR7_A05BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR7_RESERVED_7_6                                                0x0

		Delay select for the BDL on Address A[4].
		PSU_DDR_PHY_ACBDLR7_A04BD                                                       0x0

		AC Bit Delay Line Register 7
		(OFFSET, MASK, VALUE)      (0XFD08055C, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_ACBDLR7_RESERVED_31_30_MASK | DDR_PHY_ACBDLR7_A07BD_MASK | DDR_PHY_ACBDLR7_RESERVED_23_22_MASK | DDR_PHY_ACBDLR7_A06BD_MASK | DDR_PHY_ACBDLR7_RESERVED_15_14_MASK | DDR_PHY_ACBDLR7_A05BD_MASK | DDR_PHY_ACBDLR7_RESERVED_7_6_MASK | DDR_PHY_ACBDLR7_A04BD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACBDLR7_RESERVED_31_30_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR7_A07BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_23_22_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR7_A06BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_15_14_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR7_A05BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR7_RESERVED_7_6_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR7_A04BD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACBDLR7_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ACBDLR8 @ 0XFD080560</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR8_RESERVED_31_30                                              0x0

		Delay select for the BDL on Address A[11].
		PSU_DDR_PHY_ACBDLR8_A11BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR8_RESERVED_23_22                                              0x0

		Delay select for the BDL on Address A[10].
		PSU_DDR_PHY_ACBDLR8_A10BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR8_RESERVED_15_14                                              0x0

		Delay select for the BDL on Address A[9].
		PSU_DDR_PHY_ACBDLR8_A09BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR8_RESERVED_7_6                                                0x0

		Delay select for the BDL on Address A[8].
		PSU_DDR_PHY_ACBDLR8_A08BD                                                       0x0

		AC Bit Delay Line Register 8
		(OFFSET, MASK, VALUE)      (0XFD080560, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_ACBDLR8_RESERVED_31_30_MASK | DDR_PHY_ACBDLR8_A11BD_MASK | DDR_PHY_ACBDLR8_RESERVED_23_22_MASK | DDR_PHY_ACBDLR8_A10BD_MASK | DDR_PHY_ACBDLR8_RESERVED_15_14_MASK | DDR_PHY_ACBDLR8_A09BD_MASK | DDR_PHY_ACBDLR8_RESERVED_7_6_MASK | DDR_PHY_ACBDLR8_A08BD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACBDLR8_RESERVED_31_30_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR8_A11BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_23_22_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR8_A10BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_15_14_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR8_A09BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR8_RESERVED_7_6_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR8_A08BD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACBDLR8_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ACBDLR9 @ 0XFD080564</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR9_RESERVED_31_30                                              0x0

		Delay select for the BDL on Address A[15].
		PSU_DDR_PHY_ACBDLR9_A15BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR9_RESERVED_23_22                                              0x0

		Delay select for the BDL on Address A[14].
		PSU_DDR_PHY_ACBDLR9_A14BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR9_RESERVED_15_14                                              0x0

		Delay select for the BDL on Address A[13].
		PSU_DDR_PHY_ACBDLR9_A13BD                                                       0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ACBDLR9_RESERVED_7_6                                                0x0

		Delay select for the BDL on Address A[12].
		PSU_DDR_PHY_ACBDLR9_A12BD                                                       0x0

		AC Bit Delay Line Register 9
		(OFFSET, MASK, VALUE)      (0XFD080564, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_ACBDLR9_RESERVED_31_30_MASK | DDR_PHY_ACBDLR9_A15BD_MASK | DDR_PHY_ACBDLR9_RESERVED_23_22_MASK | DDR_PHY_ACBDLR9_A14BD_MASK | DDR_PHY_ACBDLR9_RESERVED_15_14_MASK | DDR_PHY_ACBDLR9_A13BD_MASK | DDR_PHY_ACBDLR9_RESERVED_7_6_MASK | DDR_PHY_ACBDLR9_A12BD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ACBDLR9_RESERVED_31_30_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR9_A15BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_23_22_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR9_A14BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_15_14_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR9_A13BD_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR9_RESERVED_7_6_SHIFT
			| 0x00000000U << DDR_PHY_ACBDLR9_A12BD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ACBDLR9_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ZQCR @ 0XFD080680</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_ZQCR_RESERVED_31_26                                                 0x0

		ZQ VREF Range
		PSU_DDR_PHY_ZQCR_ZQREFISELRANGE                                                 0x0

		Programmable Wait for Frequency B
		PSU_DDR_PHY_ZQCR_PGWAIT_FRQB                                                    0x11

		Programmable Wait for Frequency A
		PSU_DDR_PHY_ZQCR_PGWAIT_FRQA                                                    0x11

		ZQ VREF Pad Enable
		PSU_DDR_PHY_ZQCR_ZQREFPEN                                                       0x0

		ZQ Internal VREF Enable
		PSU_DDR_PHY_ZQCR_ZQREFIEN                                                       0x1

		Choice of termination mode
		PSU_DDR_PHY_ZQCR_ODT_MODE                                                       0x1

		Force ZCAL VT update
		PSU_DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE                                           0x0

		IO VT Drift Limit
		PSU_DDR_PHY_ZQCR_IODLMT                                                         0x2

		Averaging algorithm enable, if set, enables averaging algorithm
		PSU_DDR_PHY_ZQCR_AVGEN                                                          0x1

		Maximum number of averaging rounds to be used by averaging algorithm
		PSU_DDR_PHY_ZQCR_AVGMAX                                                         0x2

		ZQ Calibration Type
		PSU_DDR_PHY_ZQCR_ZCALT                                                          0x0

		ZQ Power Down
		PSU_DDR_PHY_ZQCR_ZQPD                                                           0x0

		ZQ Impedance Control Register
		(OFFSET, MASK, VALUE)      (0XFD080680, 0xFFFFFFFFU ,0x008A2A58U)  
		RegMask = (DDR_PHY_ZQCR_RESERVED_31_26_MASK | DDR_PHY_ZQCR_ZQREFISELRANGE_MASK | DDR_PHY_ZQCR_PGWAIT_FRQB_MASK | DDR_PHY_ZQCR_PGWAIT_FRQA_MASK | DDR_PHY_ZQCR_ZQREFPEN_MASK | DDR_PHY_ZQCR_ZQREFIEN_MASK | DDR_PHY_ZQCR_ODT_MODE_MASK | DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_MASK | DDR_PHY_ZQCR_IODLMT_MASK | DDR_PHY_ZQCR_AVGEN_MASK | DDR_PHY_ZQCR_AVGMAX_MASK | DDR_PHY_ZQCR_ZCALT_MASK | DDR_PHY_ZQCR_ZQPD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ZQCR_RESERVED_31_26_SHIFT
			| 0x00000000U << DDR_PHY_ZQCR_ZQREFISELRANGE_SHIFT
			| 0x00000011U << DDR_PHY_ZQCR_PGWAIT_FRQB_SHIFT
			| 0x00000011U << DDR_PHY_ZQCR_PGWAIT_FRQA_SHIFT
			| 0x00000000U << DDR_PHY_ZQCR_ZQREFPEN_SHIFT
			| 0x00000001U << DDR_PHY_ZQCR_ZQREFIEN_SHIFT
			| 0x00000001U << DDR_PHY_ZQCR_ODT_MODE_SHIFT
			| 0x00000000U << DDR_PHY_ZQCR_FORCE_ZCAL_VT_UPDATE_SHIFT
			| 0x00000002U << DDR_PHY_ZQCR_IODLMT_SHIFT
			| 0x00000001U << DDR_PHY_ZQCR_AVGEN_SHIFT
			| 0x00000002U << DDR_PHY_ZQCR_AVGMAX_SHIFT
			| 0x00000000U << DDR_PHY_ZQCR_ZCALT_SHIFT
			| 0x00000000U << DDR_PHY_ZQCR_ZQPD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ZQCR_OFFSET ,0xFFFFFFFFU ,0x008A2A58U);
	/*############################################################################################################################ */

		/*Register : ZQ0PR0 @ 0XFD080684</p>

		Pull-down drive strength ZCTRL over-ride enable
		PSU_DDR_PHY_ZQ0PR0_PD_DRV_ZDEN                                                  0x0

		Pull-up drive strength ZCTRL over-ride enable
		PSU_DDR_PHY_ZQ0PR0_PU_DRV_ZDEN                                                  0x0

		Pull-down termination ZCTRL over-ride enable
		PSU_DDR_PHY_ZQ0PR0_PD_ODT_ZDEN                                                  0x0

		Pull-up termination ZCTRL over-ride enable
		PSU_DDR_PHY_ZQ0PR0_PU_ODT_ZDEN                                                  0x0

		Calibration segment bypass
		PSU_DDR_PHY_ZQ0PR0_ZSEGBYP                                                      0x0

		VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB
		PSU_DDR_PHY_ZQ0PR0_ZLE_MODE                                                     0x0

		Termination adjustment
		PSU_DDR_PHY_ZQ0PR0_ODT_ADJUST                                                   0x0

		Pulldown drive strength adjustment
		PSU_DDR_PHY_ZQ0PR0_PD_DRV_ADJUST                                                0x0

		Pullup drive strength adjustment
		PSU_DDR_PHY_ZQ0PR0_PU_DRV_ADJUST                                                0x0

		DRAM Impedance Divide Ratio
		PSU_DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT                                               0x7

		HOST Impedance Divide Ratio
		PSU_DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT                                               0x7

		Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)
		PSU_DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD                                            0xd

		Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)
		PSU_DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU                                            0xd

		ZQ n Impedance Control Program Register 0
		(OFFSET, MASK, VALUE)      (0XFD080684, 0xFFFFFFFFU ,0x000077DDU)  
		RegMask = (DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_MASK | DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_MASK | DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_MASK | DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_MASK | DDR_PHY_ZQ0PR0_ZSEGBYP_MASK | DDR_PHY_ZQ0PR0_ZLE_MODE_MASK | DDR_PHY_ZQ0PR0_ODT_ADJUST_MASK | DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_MASK | DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_MASK | DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_MASK | DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_MASK | DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_MASK | DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ZQ0PR0_PD_DRV_ZDEN_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_DRV_ZDEN_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0PR0_PD_ODT_ZDEN_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_ODT_ZDEN_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0PR0_ZSEGBYP_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0PR0_ZLE_MODE_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0PR0_ODT_ADJUST_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0PR0_PD_DRV_ADJUST_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0PR0_PU_DRV_ADJUST_SHIFT
			| 0x00000007U << DDR_PHY_ZQ0PR0_ZPROG_DRAM_ODT_SHIFT
			| 0x00000007U << DDR_PHY_ZQ0PR0_ZPROG_HOST_ODT_SHIFT
			| 0x0000000DU << DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PD_SHIFT
			| 0x0000000DU << DDR_PHY_ZQ0PR0_ZPROG_ASYM_DRV_PU_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ZQ0PR0_OFFSET ,0xFFFFFFFFU ,0x000077DDU);
	/*############################################################################################################################ */

		/*Register : ZQ0OR0 @ 0XFD080694</p>

		Reserved. Return zeros on reads.
		PSU_DDR_PHY_ZQ0OR0_RESERVED_31_26                                               0x0

		Override value for the pull-up output impedance
		PSU_DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD                                            0x1e1

		Reserved. Return zeros on reads.
		PSU_DDR_PHY_ZQ0OR0_RESERVED_15_10                                               0x0

		Override value for the pull-down output impedance
		PSU_DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD                                            0x210

		ZQ n Impedance Control Override Data Register 0
		(OFFSET, MASK, VALUE)      (0XFD080694, 0xFFFFFFFFU ,0x01E10210U)  
		RegMask = (DDR_PHY_ZQ0OR0_RESERVED_31_26_MASK | DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_MASK | DDR_PHY_ZQ0OR0_RESERVED_15_10_MASK | DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ZQ0OR0_RESERVED_31_26_SHIFT
			| 0x000001E1U << DDR_PHY_ZQ0OR0_ZDATA_PU_DRV_OVRD_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0OR0_RESERVED_15_10_SHIFT
			| 0x00000210U << DDR_PHY_ZQ0OR0_ZDATA_PD_DRV_OVRD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ZQ0OR0_OFFSET ,0xFFFFFFFFU ,0x01E10210U);
	/*############################################################################################################################ */

		/*Register : ZQ0OR1 @ 0XFD080698</p>

		Reserved. Return zeros on reads.
		PSU_DDR_PHY_ZQ0OR1_RESERVED_31_26                                               0x0

		Override value for the pull-up termination
		PSU_DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD                                            0x1e1

		Reserved. Return zeros on reads.
		PSU_DDR_PHY_ZQ0OR1_RESERVED_15_10                                               0x0

		Override value for the pull-down termination
		PSU_DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD                                            0x0

		ZQ n Impedance Control Override Data Register 1
		(OFFSET, MASK, VALUE)      (0XFD080698, 0xFFFFFFFFU ,0x01E10000U)  
		RegMask = (DDR_PHY_ZQ0OR1_RESERVED_31_26_MASK | DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_MASK | DDR_PHY_ZQ0OR1_RESERVED_15_10_MASK | DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ZQ0OR1_RESERVED_31_26_SHIFT
			| 0x000001E1U << DDR_PHY_ZQ0OR1_ZDATA_PU_ODT_OVRD_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0OR1_RESERVED_15_10_SHIFT
			| 0x00000000U << DDR_PHY_ZQ0OR1_ZDATA_PD_ODT_OVRD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ZQ0OR1_OFFSET ,0xFFFFFFFFU ,0x01E10000U);
	/*############################################################################################################################ */

		/*Register : ZQ1PR0 @ 0XFD0806A4</p>

		Pull-down drive strength ZCTRL over-ride enable
		PSU_DDR_PHY_ZQ1PR0_PD_DRV_ZDEN                                                  0x0

		Pull-up drive strength ZCTRL over-ride enable
		PSU_DDR_PHY_ZQ1PR0_PU_DRV_ZDEN                                                  0x0

		Pull-down termination ZCTRL over-ride enable
		PSU_DDR_PHY_ZQ1PR0_PD_ODT_ZDEN                                                  0x0

		Pull-up termination ZCTRL over-ride enable
		PSU_DDR_PHY_ZQ1PR0_PU_ODT_ZDEN                                                  0x0

		Calibration segment bypass
		PSU_DDR_PHY_ZQ1PR0_ZSEGBYP                                                      0x0

		VREF latch mode controls the mode in which the ZLE pin of the PVREF cell is driven by the PUB
		PSU_DDR_PHY_ZQ1PR0_ZLE_MODE                                                     0x0

		Termination adjustment
		PSU_DDR_PHY_ZQ1PR0_ODT_ADJUST                                                   0x0

		Pulldown drive strength adjustment
		PSU_DDR_PHY_ZQ1PR0_PD_DRV_ADJUST                                                0x1

		Pullup drive strength adjustment
		PSU_DDR_PHY_ZQ1PR0_PU_DRV_ADJUST                                                0x0

		DRAM Impedance Divide Ratio
		PSU_DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT                                               0x7

		HOST Impedance Divide Ratio
		PSU_DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT                                               0xb

		Impedance Divide Ratio (pulldown drive calibration during asymmetric drive strength calibration)
		PSU_DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD                                            0xd

		Impedance Divide Ratio (pullup drive calibration during asymmetric drive strength calibration)
		PSU_DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU                                            0xb

		ZQ n Impedance Control Program Register 0
		(OFFSET, MASK, VALUE)      (0XFD0806A4, 0xFFFFFFFFU ,0x00087BDBU)  
		RegMask = (DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_MASK | DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_MASK | DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_MASK | DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_MASK | DDR_PHY_ZQ1PR0_ZSEGBYP_MASK | DDR_PHY_ZQ1PR0_ZLE_MODE_MASK | DDR_PHY_ZQ1PR0_ODT_ADJUST_MASK | DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_MASK | DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_MASK | DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_MASK | DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_MASK | DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_MASK | DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_ZQ1PR0_PD_DRV_ZDEN_SHIFT
			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_DRV_ZDEN_SHIFT
			| 0x00000000U << DDR_PHY_ZQ1PR0_PD_ODT_ZDEN_SHIFT
			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_ODT_ZDEN_SHIFT
			| 0x00000000U << DDR_PHY_ZQ1PR0_ZSEGBYP_SHIFT
			| 0x00000000U << DDR_PHY_ZQ1PR0_ZLE_MODE_SHIFT
			| 0x00000000U << DDR_PHY_ZQ1PR0_ODT_ADJUST_SHIFT
			| 0x00000001U << DDR_PHY_ZQ1PR0_PD_DRV_ADJUST_SHIFT
			| 0x00000000U << DDR_PHY_ZQ1PR0_PU_DRV_ADJUST_SHIFT
			| 0x00000007U << DDR_PHY_ZQ1PR0_ZPROG_DRAM_ODT_SHIFT
			| 0x0000000BU << DDR_PHY_ZQ1PR0_ZPROG_HOST_ODT_SHIFT
			| 0x0000000DU << DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PD_SHIFT
			| 0x0000000BU << DDR_PHY_ZQ1PR0_ZPROG_ASYM_DRV_PU_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_ZQ1PR0_OFFSET ,0xFFFFFFFFU ,0x00087BDBU);
	/*############################################################################################################################ */

		/*Register : DX0GCR0 @ 0XFD080700</p>

		Calibration Bypass
		PSU_DDR_PHY_DX0GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX0GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX0GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX0GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX0GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX0GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX0GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX0GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX0GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX0GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX0GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX0GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX0GCR0_DQSGPDR                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX0GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX0GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX0GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX0GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080700, 0xFFFFFFFFU ,0x40800604U)  
		RegMask = (DDR_PHY_DX0GCR0_CALBYP_MASK | DDR_PHY_DX0GCR0_MDLEN_MASK | DDR_PHY_DX0GCR0_CODTSHFT_MASK | DDR_PHY_DX0GCR0_DQSDCC_MASK | DDR_PHY_DX0GCR0_RDDLY_MASK | DDR_PHY_DX0GCR0_RESERVED_19_14_MASK | DDR_PHY_DX0GCR0_DQSNSEPDR_MASK | DDR_PHY_DX0GCR0_DQSSEPDR_MASK | DDR_PHY_DX0GCR0_RTTOAL_MASK | DDR_PHY_DX0GCR0_RTTOH_MASK | DDR_PHY_DX0GCR0_CPDRSHFT_MASK | DDR_PHY_DX0GCR0_DQSRPD_MASK | DDR_PHY_DX0GCR0_DQSGPDR_MASK | DDR_PHY_DX0GCR0_RESERVED_4_MASK | DDR_PHY_DX0GCR0_DQSGODT_MASK | DDR_PHY_DX0GCR0_DQSGOE_MASK | DDR_PHY_DX0GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX0GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX0GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX0GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX0GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_DQSRPD_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX0GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX0GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
	/*############################################################################################################################ */

		/*Register : DX0GCR4 @ 0XFD080710</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX0GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX0GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX0GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX0GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX0GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX0GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX0GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX0GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX0GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX0GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080710, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX0GCR4_RESERVED_31_29_MASK | DDR_PHY_DX0GCR4_DXREFPEN_MASK | DDR_PHY_DX0GCR4_DXREFEEN_MASK | DDR_PHY_DX0GCR4_DXREFSEN_MASK | DDR_PHY_DX0GCR4_RESERVED_24_MASK | DDR_PHY_DX0GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX0GCR4_DXREFESEL_MASK | DDR_PHY_DX0GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX0GCR4_DXREFSSEL_MASK | DDR_PHY_DX0GCR4_RESERVED_7_6_MASK | DDR_PHY_DX0GCR4_DXREFIEN_MASK | DDR_PHY_DX0GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX0GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX0GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX0GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX0GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX0GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX0GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX0GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX0GCR5 @ 0XFD080714</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX0GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX0GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX0GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX0GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080714, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX0GCR5_RESERVED_31_MASK | DDR_PHY_DX0GCR5_DXREFISELR3_MASK | DDR_PHY_DX0GCR5_RESERVED_23_MASK | DDR_PHY_DX0GCR5_DXREFISELR2_MASK | DDR_PHY_DX0GCR5_RESERVED_15_MASK | DDR_PHY_DX0GCR5_DXREFISELR1_MASK | DDR_PHY_DX0GCR5_RESERVED_7_MASK | DDR_PHY_DX0GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX0GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX0GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX0GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX0GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX0GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX0GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX0GCR6 @ 0XFD080718</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX0GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX0GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX0GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX0GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX0GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080718, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX0GCR6_RESERVED_31_30_MASK | DDR_PHY_DX0GCR6_DXDQVREFR3_MASK | DDR_PHY_DX0GCR6_RESERVED_23_22_MASK | DDR_PHY_DX0GCR6_DXDQVREFR2_MASK | DDR_PHY_DX0GCR6_RESERVED_15_14_MASK | DDR_PHY_DX0GCR6_DXDQVREFR1_MASK | DDR_PHY_DX0GCR6_RESERVED_7_6_MASK | DDR_PHY_DX0GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX0GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX0GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX0GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX0GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX0GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX0GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX0GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX0LCDLR2 @ 0XFD080788</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX0LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX0LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX0LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX0LCDLR2_DQSGD                                                     0x0

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080788, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_DX0LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX0LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX0LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX0LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX0LCDLR2_RESERVED_15_9_SHIFT
			| 0x00000000U << DDR_PHY_DX0LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX0LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DX0GTR0 @ 0XFD0807C0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX0GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX0GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX0GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX0GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX0GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX0GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX0GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX0GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD0807C0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX0GTR0_RESERVED_31_24_MASK | DDR_PHY_DX0GTR0_WDQSL_MASK | DDR_PHY_DX0GTR0_RESERVED_23_20_MASK | DDR_PHY_DX0GTR0_WLSL_MASK | DDR_PHY_DX0GTR0_RESERVED_15_13_MASK | DDR_PHY_DX0GTR0_RESERVED_12_8_MASK | DDR_PHY_DX0GTR0_RESERVED_7_5_MASK | DDR_PHY_DX0GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX0GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX0GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX0GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX0GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX0GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX0GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX1GCR0 @ 0XFD080800</p>

		Calibration Bypass
		PSU_DDR_PHY_DX1GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX1GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX1GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX1GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX1GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX1GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX1GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX1GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX1GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX1GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX1GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX1GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX1GCR0_DQSGPDR                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX1GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX1GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX1GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX1GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080800, 0xFFFFFFFFU ,0x40800604U)  
		RegMask = (DDR_PHY_DX1GCR0_CALBYP_MASK | DDR_PHY_DX1GCR0_MDLEN_MASK | DDR_PHY_DX1GCR0_CODTSHFT_MASK | DDR_PHY_DX1GCR0_DQSDCC_MASK | DDR_PHY_DX1GCR0_RDDLY_MASK | DDR_PHY_DX1GCR0_RESERVED_19_14_MASK | DDR_PHY_DX1GCR0_DQSNSEPDR_MASK | DDR_PHY_DX1GCR0_DQSSEPDR_MASK | DDR_PHY_DX1GCR0_RTTOAL_MASK | DDR_PHY_DX1GCR0_RTTOH_MASK | DDR_PHY_DX1GCR0_CPDRSHFT_MASK | DDR_PHY_DX1GCR0_DQSRPD_MASK | DDR_PHY_DX1GCR0_DQSGPDR_MASK | DDR_PHY_DX1GCR0_RESERVED_4_MASK | DDR_PHY_DX1GCR0_DQSGODT_MASK | DDR_PHY_DX1GCR0_DQSGOE_MASK | DDR_PHY_DX1GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX1GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX1GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX1GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX1GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_DQSRPD_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX1GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX1GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
	/*############################################################################################################################ */

		/*Register : DX1GCR4 @ 0XFD080810</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX1GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX1GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX1GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX1GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX1GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX1GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX1GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX1GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX1GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX1GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080810, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX1GCR4_RESERVED_31_29_MASK | DDR_PHY_DX1GCR4_DXREFPEN_MASK | DDR_PHY_DX1GCR4_DXREFEEN_MASK | DDR_PHY_DX1GCR4_DXREFSEN_MASK | DDR_PHY_DX1GCR4_RESERVED_24_MASK | DDR_PHY_DX1GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX1GCR4_DXREFESEL_MASK | DDR_PHY_DX1GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX1GCR4_DXREFSSEL_MASK | DDR_PHY_DX1GCR4_RESERVED_7_6_MASK | DDR_PHY_DX1GCR4_DXREFIEN_MASK | DDR_PHY_DX1GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX1GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX1GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX1GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX1GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX1GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX1GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX1GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX1GCR5 @ 0XFD080814</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX1GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX1GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX1GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX1GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080814, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX1GCR5_RESERVED_31_MASK | DDR_PHY_DX1GCR5_DXREFISELR3_MASK | DDR_PHY_DX1GCR5_RESERVED_23_MASK | DDR_PHY_DX1GCR5_DXREFISELR2_MASK | DDR_PHY_DX1GCR5_RESERVED_15_MASK | DDR_PHY_DX1GCR5_DXREFISELR1_MASK | DDR_PHY_DX1GCR5_RESERVED_7_MASK | DDR_PHY_DX1GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX1GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX1GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX1GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX1GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX1GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX1GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX1GCR6 @ 0XFD080818</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX1GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX1GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX1GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX1GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX1GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080818, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX1GCR6_RESERVED_31_30_MASK | DDR_PHY_DX1GCR6_DXDQVREFR3_MASK | DDR_PHY_DX1GCR6_RESERVED_23_22_MASK | DDR_PHY_DX1GCR6_DXDQVREFR2_MASK | DDR_PHY_DX1GCR6_RESERVED_15_14_MASK | DDR_PHY_DX1GCR6_DXDQVREFR1_MASK | DDR_PHY_DX1GCR6_RESERVED_7_6_MASK | DDR_PHY_DX1GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX1GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX1GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX1GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX1GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX1GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX1GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX1GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX1LCDLR2 @ 0XFD080888</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX1LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX1LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX1LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX1LCDLR2_DQSGD                                                     0x0

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080888, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_DX1LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX1LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX1LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX1LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX1LCDLR2_RESERVED_15_9_SHIFT
			| 0x00000000U << DDR_PHY_DX1LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX1LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DX1GTR0 @ 0XFD0808C0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX1GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX1GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX1GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX1GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX1GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX1GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX1GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX1GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD0808C0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX1GTR0_RESERVED_31_24_MASK | DDR_PHY_DX1GTR0_WDQSL_MASK | DDR_PHY_DX1GTR0_RESERVED_23_20_MASK | DDR_PHY_DX1GTR0_WLSL_MASK | DDR_PHY_DX1GTR0_RESERVED_15_13_MASK | DDR_PHY_DX1GTR0_RESERVED_12_8_MASK | DDR_PHY_DX1GTR0_RESERVED_7_5_MASK | DDR_PHY_DX1GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX1GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX1GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX1GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX1GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX1GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX1GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX2GCR0 @ 0XFD080900</p>

		Calibration Bypass
		PSU_DDR_PHY_DX2GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX2GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX2GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX2GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX2GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX2GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX2GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX2GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX2GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX2GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX2GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX2GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX2GCR0_DQSGPDR                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX2GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX2GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX2GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX2GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080900, 0xFFFFFFFFU ,0x40800604U)  
		RegMask = (DDR_PHY_DX2GCR0_CALBYP_MASK | DDR_PHY_DX2GCR0_MDLEN_MASK | DDR_PHY_DX2GCR0_CODTSHFT_MASK | DDR_PHY_DX2GCR0_DQSDCC_MASK | DDR_PHY_DX2GCR0_RDDLY_MASK | DDR_PHY_DX2GCR0_RESERVED_19_14_MASK | DDR_PHY_DX2GCR0_DQSNSEPDR_MASK | DDR_PHY_DX2GCR0_DQSSEPDR_MASK | DDR_PHY_DX2GCR0_RTTOAL_MASK | DDR_PHY_DX2GCR0_RTTOH_MASK | DDR_PHY_DX2GCR0_CPDRSHFT_MASK | DDR_PHY_DX2GCR0_DQSRPD_MASK | DDR_PHY_DX2GCR0_DQSGPDR_MASK | DDR_PHY_DX2GCR0_RESERVED_4_MASK | DDR_PHY_DX2GCR0_DQSGODT_MASK | DDR_PHY_DX2GCR0_DQSGOE_MASK | DDR_PHY_DX2GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX2GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX2GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX2GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_DQSRPD_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX2GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
	/*############################################################################################################################ */

		/*Register : DX2GCR1 @ 0XFD080904</p>

		Enables the PDR mode for DQ[7:0]
		PSU_DDR_PHY_DX2GCR1_DXPDRMODE                                                   0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_DX2GCR1_RESERVED_15                                                 0x0

		Select the delayed or non-delayed read data strobe #
		PSU_DDR_PHY_DX2GCR1_QSNSEL                                                      0x1

		Select the delayed or non-delayed read data strobe
		PSU_DDR_PHY_DX2GCR1_QSSEL                                                       0x1

		Enables Read Data Strobe in a byte lane
		PSU_DDR_PHY_DX2GCR1_OEEN                                                        0x1

		Enables PDR in a byte lane
		PSU_DDR_PHY_DX2GCR1_PDREN                                                       0x1

		Enables ODT/TE in a byte lane
		PSU_DDR_PHY_DX2GCR1_TEEN                                                        0x1

		Enables Write Data strobe in a byte lane
		PSU_DDR_PHY_DX2GCR1_DSEN                                                        0x1

		Enables DM pin in a byte lane
		PSU_DDR_PHY_DX2GCR1_DMEN                                                        0x1

		Enables DQ corresponding to each bit in a byte
		PSU_DDR_PHY_DX2GCR1_DQEN                                                        0xff

		DATX8 n General Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080904, 0xFFFFFFFFU ,0x00007FFFU)  
		RegMask = (DDR_PHY_DX2GCR1_DXPDRMODE_MASK | DDR_PHY_DX2GCR1_RESERVED_15_MASK | DDR_PHY_DX2GCR1_QSNSEL_MASK | DDR_PHY_DX2GCR1_QSSEL_MASK | DDR_PHY_DX2GCR1_OEEN_MASK | DDR_PHY_DX2GCR1_PDREN_MASK | DDR_PHY_DX2GCR1_TEEN_MASK | DDR_PHY_DX2GCR1_DSEN_MASK | DDR_PHY_DX2GCR1_DMEN_MASK | DDR_PHY_DX2GCR1_DQEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX2GCR1_DXPDRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR1_RESERVED_15_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR1_QSNSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR1_QSSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR1_OEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR1_PDREN_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR1_TEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR1_DSEN_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR1_DMEN_SHIFT
			| 0x000000FFU << DDR_PHY_DX2GCR1_DQEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX2GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
	/*############################################################################################################################ */

		/*Register : DX2GCR4 @ 0XFD080910</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX2GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX2GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX2GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX2GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX2GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX2GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX2GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX2GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX2GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX2GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080910, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX2GCR4_RESERVED_31_29_MASK | DDR_PHY_DX2GCR4_DXREFPEN_MASK | DDR_PHY_DX2GCR4_DXREFEEN_MASK | DDR_PHY_DX2GCR4_DXREFSEN_MASK | DDR_PHY_DX2GCR4_RESERVED_24_MASK | DDR_PHY_DX2GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX2GCR4_DXREFESEL_MASK | DDR_PHY_DX2GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX2GCR4_DXREFSSEL_MASK | DDR_PHY_DX2GCR4_RESERVED_7_6_MASK | DDR_PHY_DX2GCR4_DXREFIEN_MASK | DDR_PHY_DX2GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX2GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX2GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX2GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX2GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX2GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX2GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX2GCR5 @ 0XFD080914</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX2GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX2GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX2GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX2GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080914, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX2GCR5_RESERVED_31_MASK | DDR_PHY_DX2GCR5_DXREFISELR3_MASK | DDR_PHY_DX2GCR5_RESERVED_23_MASK | DDR_PHY_DX2GCR5_DXREFISELR2_MASK | DDR_PHY_DX2GCR5_RESERVED_15_MASK | DDR_PHY_DX2GCR5_DXREFISELR1_MASK | DDR_PHY_DX2GCR5_RESERVED_7_MASK | DDR_PHY_DX2GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX2GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX2GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX2GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX2GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX2GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX2GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX2GCR6 @ 0XFD080918</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX2GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX2GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX2GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX2GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX2GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080918, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX2GCR6_RESERVED_31_30_MASK | DDR_PHY_DX2GCR6_DXDQVREFR3_MASK | DDR_PHY_DX2GCR6_RESERVED_23_22_MASK | DDR_PHY_DX2GCR6_DXDQVREFR2_MASK | DDR_PHY_DX2GCR6_RESERVED_15_14_MASK | DDR_PHY_DX2GCR6_DXDQVREFR1_MASK | DDR_PHY_DX2GCR6_RESERVED_7_6_MASK | DDR_PHY_DX2GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX2GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX2GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX2GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX2GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX2GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX2GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX2GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX2LCDLR2 @ 0XFD080988</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX2LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX2LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX2LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX2LCDLR2_DQSGD                                                     0x0

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080988, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_DX2LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX2LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX2LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX2LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX2LCDLR2_RESERVED_15_9_SHIFT
			| 0x00000000U << DDR_PHY_DX2LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX2LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DX2GTR0 @ 0XFD0809C0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX2GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX2GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX2GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX2GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX2GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX2GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX2GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX2GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD0809C0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX2GTR0_RESERVED_31_24_MASK | DDR_PHY_DX2GTR0_WDQSL_MASK | DDR_PHY_DX2GTR0_RESERVED_23_20_MASK | DDR_PHY_DX2GTR0_WLSL_MASK | DDR_PHY_DX2GTR0_RESERVED_15_13_MASK | DDR_PHY_DX2GTR0_RESERVED_12_8_MASK | DDR_PHY_DX2GTR0_RESERVED_7_5_MASK | DDR_PHY_DX2GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX2GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX2GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX2GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX2GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX2GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX2GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX3GCR0 @ 0XFD080A00</p>

		Calibration Bypass
		PSU_DDR_PHY_DX3GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX3GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX3GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX3GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX3GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX3GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX3GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX3GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX3GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX3GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX3GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX3GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX3GCR0_DQSGPDR                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX3GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX3GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX3GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX3GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080A00, 0xFFFFFFFFU ,0x40800604U)  
		RegMask = (DDR_PHY_DX3GCR0_CALBYP_MASK | DDR_PHY_DX3GCR0_MDLEN_MASK | DDR_PHY_DX3GCR0_CODTSHFT_MASK | DDR_PHY_DX3GCR0_DQSDCC_MASK | DDR_PHY_DX3GCR0_RDDLY_MASK | DDR_PHY_DX3GCR0_RESERVED_19_14_MASK | DDR_PHY_DX3GCR0_DQSNSEPDR_MASK | DDR_PHY_DX3GCR0_DQSSEPDR_MASK | DDR_PHY_DX3GCR0_RTTOAL_MASK | DDR_PHY_DX3GCR0_RTTOH_MASK | DDR_PHY_DX3GCR0_CPDRSHFT_MASK | DDR_PHY_DX3GCR0_DQSRPD_MASK | DDR_PHY_DX3GCR0_DQSGPDR_MASK | DDR_PHY_DX3GCR0_RESERVED_4_MASK | DDR_PHY_DX3GCR0_DQSGODT_MASK | DDR_PHY_DX3GCR0_DQSGOE_MASK | DDR_PHY_DX3GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX3GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX3GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX3GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_DQSRPD_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX3GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
	/*############################################################################################################################ */

		/*Register : DX3GCR1 @ 0XFD080A04</p>

		Enables the PDR mode for DQ[7:0]
		PSU_DDR_PHY_DX3GCR1_DXPDRMODE                                                   0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_DX3GCR1_RESERVED_15                                                 0x0

		Select the delayed or non-delayed read data strobe #
		PSU_DDR_PHY_DX3GCR1_QSNSEL                                                      0x1

		Select the delayed or non-delayed read data strobe
		PSU_DDR_PHY_DX3GCR1_QSSEL                                                       0x1

		Enables Read Data Strobe in a byte lane
		PSU_DDR_PHY_DX3GCR1_OEEN                                                        0x1

		Enables PDR in a byte lane
		PSU_DDR_PHY_DX3GCR1_PDREN                                                       0x1

		Enables ODT/TE in a byte lane
		PSU_DDR_PHY_DX3GCR1_TEEN                                                        0x1

		Enables Write Data strobe in a byte lane
		PSU_DDR_PHY_DX3GCR1_DSEN                                                        0x1

		Enables DM pin in a byte lane
		PSU_DDR_PHY_DX3GCR1_DMEN                                                        0x1

		Enables DQ corresponding to each bit in a byte
		PSU_DDR_PHY_DX3GCR1_DQEN                                                        0xff

		DATX8 n General Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080A04, 0xFFFFFFFFU ,0x00007FFFU)  
		RegMask = (DDR_PHY_DX3GCR1_DXPDRMODE_MASK | DDR_PHY_DX3GCR1_RESERVED_15_MASK | DDR_PHY_DX3GCR1_QSNSEL_MASK | DDR_PHY_DX3GCR1_QSSEL_MASK | DDR_PHY_DX3GCR1_OEEN_MASK | DDR_PHY_DX3GCR1_PDREN_MASK | DDR_PHY_DX3GCR1_TEEN_MASK | DDR_PHY_DX3GCR1_DSEN_MASK | DDR_PHY_DX3GCR1_DMEN_MASK | DDR_PHY_DX3GCR1_DQEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX3GCR1_DXPDRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR1_RESERVED_15_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR1_QSNSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR1_QSSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR1_OEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR1_PDREN_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR1_TEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR1_DSEN_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR1_DMEN_SHIFT
			| 0x000000FFU << DDR_PHY_DX3GCR1_DQEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX3GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
	/*############################################################################################################################ */

		/*Register : DX3GCR4 @ 0XFD080A10</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX3GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX3GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX3GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX3GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX3GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX3GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX3GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX3GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX3GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX3GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080A10, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX3GCR4_RESERVED_31_29_MASK | DDR_PHY_DX3GCR4_DXREFPEN_MASK | DDR_PHY_DX3GCR4_DXREFEEN_MASK | DDR_PHY_DX3GCR4_DXREFSEN_MASK | DDR_PHY_DX3GCR4_RESERVED_24_MASK | DDR_PHY_DX3GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX3GCR4_DXREFESEL_MASK | DDR_PHY_DX3GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX3GCR4_DXREFSSEL_MASK | DDR_PHY_DX3GCR4_RESERVED_7_6_MASK | DDR_PHY_DX3GCR4_DXREFIEN_MASK | DDR_PHY_DX3GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX3GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX3GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX3GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX3GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX3GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX3GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX3GCR5 @ 0XFD080A14</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX3GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX3GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX3GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX3GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080A14, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX3GCR5_RESERVED_31_MASK | DDR_PHY_DX3GCR5_DXREFISELR3_MASK | DDR_PHY_DX3GCR5_RESERVED_23_MASK | DDR_PHY_DX3GCR5_DXREFISELR2_MASK | DDR_PHY_DX3GCR5_RESERVED_15_MASK | DDR_PHY_DX3GCR5_DXREFISELR1_MASK | DDR_PHY_DX3GCR5_RESERVED_7_MASK | DDR_PHY_DX3GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX3GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX3GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX3GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX3GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX3GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX3GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX3GCR6 @ 0XFD080A18</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX3GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX3GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX3GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX3GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX3GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080A18, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX3GCR6_RESERVED_31_30_MASK | DDR_PHY_DX3GCR6_DXDQVREFR3_MASK | DDR_PHY_DX3GCR6_RESERVED_23_22_MASK | DDR_PHY_DX3GCR6_DXDQVREFR2_MASK | DDR_PHY_DX3GCR6_RESERVED_15_14_MASK | DDR_PHY_DX3GCR6_DXDQVREFR1_MASK | DDR_PHY_DX3GCR6_RESERVED_7_6_MASK | DDR_PHY_DX3GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX3GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX3GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX3GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX3GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX3GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX3GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX3GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX3LCDLR2 @ 0XFD080A88</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX3LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX3LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX3LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX3LCDLR2_DQSGD                                                     0x0

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080A88, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_DX3LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX3LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX3LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX3LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX3LCDLR2_RESERVED_15_9_SHIFT
			| 0x00000000U << DDR_PHY_DX3LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX3LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DX3GTR0 @ 0XFD080AC0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX3GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX3GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX3GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX3GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX3GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX3GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX3GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX3GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD080AC0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX3GTR0_RESERVED_31_24_MASK | DDR_PHY_DX3GTR0_WDQSL_MASK | DDR_PHY_DX3GTR0_RESERVED_23_20_MASK | DDR_PHY_DX3GTR0_WLSL_MASK | DDR_PHY_DX3GTR0_RESERVED_15_13_MASK | DDR_PHY_DX3GTR0_RESERVED_12_8_MASK | DDR_PHY_DX3GTR0_RESERVED_7_5_MASK | DDR_PHY_DX3GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX3GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX3GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX3GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX3GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX3GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX3GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX4GCR0 @ 0XFD080B00</p>

		Calibration Bypass
		PSU_DDR_PHY_DX4GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX4GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX4GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX4GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX4GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX4GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX4GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX4GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX4GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX4GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX4GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX4GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX4GCR0_DQSGPDR                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX4GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX4GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX4GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX4GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080B00, 0xFFFFFFFFU ,0x40800604U)  
		RegMask = (DDR_PHY_DX4GCR0_CALBYP_MASK | DDR_PHY_DX4GCR0_MDLEN_MASK | DDR_PHY_DX4GCR0_CODTSHFT_MASK | DDR_PHY_DX4GCR0_DQSDCC_MASK | DDR_PHY_DX4GCR0_RDDLY_MASK | DDR_PHY_DX4GCR0_RESERVED_19_14_MASK | DDR_PHY_DX4GCR0_DQSNSEPDR_MASK | DDR_PHY_DX4GCR0_DQSSEPDR_MASK | DDR_PHY_DX4GCR0_RTTOAL_MASK | DDR_PHY_DX4GCR0_RTTOH_MASK | DDR_PHY_DX4GCR0_CPDRSHFT_MASK | DDR_PHY_DX4GCR0_DQSRPD_MASK | DDR_PHY_DX4GCR0_DQSGPDR_MASK | DDR_PHY_DX4GCR0_RESERVED_4_MASK | DDR_PHY_DX4GCR0_DQSGODT_MASK | DDR_PHY_DX4GCR0_DQSGOE_MASK | DDR_PHY_DX4GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX4GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX4GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX4GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_DQSRPD_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX4GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
	/*############################################################################################################################ */

		/*Register : DX4GCR1 @ 0XFD080B04</p>

		Enables the PDR mode for DQ[7:0]
		PSU_DDR_PHY_DX4GCR1_DXPDRMODE                                                   0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_DX4GCR1_RESERVED_15                                                 0x0

		Select the delayed or non-delayed read data strobe #
		PSU_DDR_PHY_DX4GCR1_QSNSEL                                                      0x1

		Select the delayed or non-delayed read data strobe
		PSU_DDR_PHY_DX4GCR1_QSSEL                                                       0x1

		Enables Read Data Strobe in a byte lane
		PSU_DDR_PHY_DX4GCR1_OEEN                                                        0x1

		Enables PDR in a byte lane
		PSU_DDR_PHY_DX4GCR1_PDREN                                                       0x1

		Enables ODT/TE in a byte lane
		PSU_DDR_PHY_DX4GCR1_TEEN                                                        0x1

		Enables Write Data strobe in a byte lane
		PSU_DDR_PHY_DX4GCR1_DSEN                                                        0x1

		Enables DM pin in a byte lane
		PSU_DDR_PHY_DX4GCR1_DMEN                                                        0x1

		Enables DQ corresponding to each bit in a byte
		PSU_DDR_PHY_DX4GCR1_DQEN                                                        0xff

		DATX8 n General Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080B04, 0xFFFFFFFFU ,0x00007FFFU)  
		RegMask = (DDR_PHY_DX4GCR1_DXPDRMODE_MASK | DDR_PHY_DX4GCR1_RESERVED_15_MASK | DDR_PHY_DX4GCR1_QSNSEL_MASK | DDR_PHY_DX4GCR1_QSSEL_MASK | DDR_PHY_DX4GCR1_OEEN_MASK | DDR_PHY_DX4GCR1_PDREN_MASK | DDR_PHY_DX4GCR1_TEEN_MASK | DDR_PHY_DX4GCR1_DSEN_MASK | DDR_PHY_DX4GCR1_DMEN_MASK | DDR_PHY_DX4GCR1_DQEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX4GCR1_DXPDRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR1_RESERVED_15_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR1_QSNSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR1_QSSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR1_OEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR1_PDREN_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR1_TEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR1_DSEN_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR1_DMEN_SHIFT
			| 0x000000FFU << DDR_PHY_DX4GCR1_DQEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX4GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
	/*############################################################################################################################ */

		/*Register : DX4GCR4 @ 0XFD080B10</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX4GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX4GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX4GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX4GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX4GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX4GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX4GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX4GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX4GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX4GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080B10, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX4GCR4_RESERVED_31_29_MASK | DDR_PHY_DX4GCR4_DXREFPEN_MASK | DDR_PHY_DX4GCR4_DXREFEEN_MASK | DDR_PHY_DX4GCR4_DXREFSEN_MASK | DDR_PHY_DX4GCR4_RESERVED_24_MASK | DDR_PHY_DX4GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX4GCR4_DXREFESEL_MASK | DDR_PHY_DX4GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX4GCR4_DXREFSSEL_MASK | DDR_PHY_DX4GCR4_RESERVED_7_6_MASK | DDR_PHY_DX4GCR4_DXREFIEN_MASK | DDR_PHY_DX4GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX4GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX4GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX4GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX4GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX4GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX4GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX4GCR5 @ 0XFD080B14</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX4GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX4GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX4GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX4GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080B14, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX4GCR5_RESERVED_31_MASK | DDR_PHY_DX4GCR5_DXREFISELR3_MASK | DDR_PHY_DX4GCR5_RESERVED_23_MASK | DDR_PHY_DX4GCR5_DXREFISELR2_MASK | DDR_PHY_DX4GCR5_RESERVED_15_MASK | DDR_PHY_DX4GCR5_DXREFISELR1_MASK | DDR_PHY_DX4GCR5_RESERVED_7_MASK | DDR_PHY_DX4GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX4GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX4GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX4GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX4GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX4GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX4GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX4GCR6 @ 0XFD080B18</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX4GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX4GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX4GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX4GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX4GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080B18, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX4GCR6_RESERVED_31_30_MASK | DDR_PHY_DX4GCR6_DXDQVREFR3_MASK | DDR_PHY_DX4GCR6_RESERVED_23_22_MASK | DDR_PHY_DX4GCR6_DXDQVREFR2_MASK | DDR_PHY_DX4GCR6_RESERVED_15_14_MASK | DDR_PHY_DX4GCR6_DXDQVREFR1_MASK | DDR_PHY_DX4GCR6_RESERVED_7_6_MASK | DDR_PHY_DX4GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX4GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX4GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX4GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX4GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX4GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX4GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX4GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX4LCDLR2 @ 0XFD080B88</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX4LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX4LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX4LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX4LCDLR2_DQSGD                                                     0x0

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080B88, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_DX4LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX4LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX4LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX4LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX4LCDLR2_RESERVED_15_9_SHIFT
			| 0x00000000U << DDR_PHY_DX4LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX4LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DX4GTR0 @ 0XFD080BC0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX4GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX4GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX4GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX4GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX4GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX4GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX4GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX4GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD080BC0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX4GTR0_RESERVED_31_24_MASK | DDR_PHY_DX4GTR0_WDQSL_MASK | DDR_PHY_DX4GTR0_RESERVED_23_20_MASK | DDR_PHY_DX4GTR0_WLSL_MASK | DDR_PHY_DX4GTR0_RESERVED_15_13_MASK | DDR_PHY_DX4GTR0_RESERVED_12_8_MASK | DDR_PHY_DX4GTR0_RESERVED_7_5_MASK | DDR_PHY_DX4GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX4GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX4GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX4GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX4GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX4GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX4GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX5GCR0 @ 0XFD080C00</p>

		Calibration Bypass
		PSU_DDR_PHY_DX5GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX5GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX5GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX5GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX5GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX5GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX5GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX5GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX5GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX5GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX5GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX5GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX5GCR0_DQSGPDR                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX5GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX5GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX5GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX5GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080C00, 0xFFFFFFFFU ,0x40800604U)  
		RegMask = (DDR_PHY_DX5GCR0_CALBYP_MASK | DDR_PHY_DX5GCR0_MDLEN_MASK | DDR_PHY_DX5GCR0_CODTSHFT_MASK | DDR_PHY_DX5GCR0_DQSDCC_MASK | DDR_PHY_DX5GCR0_RDDLY_MASK | DDR_PHY_DX5GCR0_RESERVED_19_14_MASK | DDR_PHY_DX5GCR0_DQSNSEPDR_MASK | DDR_PHY_DX5GCR0_DQSSEPDR_MASK | DDR_PHY_DX5GCR0_RTTOAL_MASK | DDR_PHY_DX5GCR0_RTTOH_MASK | DDR_PHY_DX5GCR0_CPDRSHFT_MASK | DDR_PHY_DX5GCR0_DQSRPD_MASK | DDR_PHY_DX5GCR0_DQSGPDR_MASK | DDR_PHY_DX5GCR0_RESERVED_4_MASK | DDR_PHY_DX5GCR0_DQSGODT_MASK | DDR_PHY_DX5GCR0_DQSGOE_MASK | DDR_PHY_DX5GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX5GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX5GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX5GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_DQSRPD_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX5GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
	/*############################################################################################################################ */

		/*Register : DX5GCR1 @ 0XFD080C04</p>

		Enables the PDR mode for DQ[7:0]
		PSU_DDR_PHY_DX5GCR1_DXPDRMODE                                                   0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_DX5GCR1_RESERVED_15                                                 0x0

		Select the delayed or non-delayed read data strobe #
		PSU_DDR_PHY_DX5GCR1_QSNSEL                                                      0x1

		Select the delayed or non-delayed read data strobe
		PSU_DDR_PHY_DX5GCR1_QSSEL                                                       0x1

		Enables Read Data Strobe in a byte lane
		PSU_DDR_PHY_DX5GCR1_OEEN                                                        0x1

		Enables PDR in a byte lane
		PSU_DDR_PHY_DX5GCR1_PDREN                                                       0x1

		Enables ODT/TE in a byte lane
		PSU_DDR_PHY_DX5GCR1_TEEN                                                        0x1

		Enables Write Data strobe in a byte lane
		PSU_DDR_PHY_DX5GCR1_DSEN                                                        0x1

		Enables DM pin in a byte lane
		PSU_DDR_PHY_DX5GCR1_DMEN                                                        0x1

		Enables DQ corresponding to each bit in a byte
		PSU_DDR_PHY_DX5GCR1_DQEN                                                        0xff

		DATX8 n General Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080C04, 0xFFFFFFFFU ,0x00007FFFU)  
		RegMask = (DDR_PHY_DX5GCR1_DXPDRMODE_MASK | DDR_PHY_DX5GCR1_RESERVED_15_MASK | DDR_PHY_DX5GCR1_QSNSEL_MASK | DDR_PHY_DX5GCR1_QSSEL_MASK | DDR_PHY_DX5GCR1_OEEN_MASK | DDR_PHY_DX5GCR1_PDREN_MASK | DDR_PHY_DX5GCR1_TEEN_MASK | DDR_PHY_DX5GCR1_DSEN_MASK | DDR_PHY_DX5GCR1_DMEN_MASK | DDR_PHY_DX5GCR1_DQEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX5GCR1_DXPDRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR1_RESERVED_15_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR1_QSNSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR1_QSSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR1_OEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR1_PDREN_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR1_TEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR1_DSEN_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR1_DMEN_SHIFT
			| 0x000000FFU << DDR_PHY_DX5GCR1_DQEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX5GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
	/*############################################################################################################################ */

		/*Register : DX5GCR4 @ 0XFD080C10</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX5GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX5GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX5GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX5GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX5GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX5GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX5GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX5GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX5GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX5GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080C10, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX5GCR4_RESERVED_31_29_MASK | DDR_PHY_DX5GCR4_DXREFPEN_MASK | DDR_PHY_DX5GCR4_DXREFEEN_MASK | DDR_PHY_DX5GCR4_DXREFSEN_MASK | DDR_PHY_DX5GCR4_RESERVED_24_MASK | DDR_PHY_DX5GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX5GCR4_DXREFESEL_MASK | DDR_PHY_DX5GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX5GCR4_DXREFSSEL_MASK | DDR_PHY_DX5GCR4_RESERVED_7_6_MASK | DDR_PHY_DX5GCR4_DXREFIEN_MASK | DDR_PHY_DX5GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX5GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX5GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX5GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX5GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX5GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX5GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX5GCR5 @ 0XFD080C14</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX5GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX5GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX5GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX5GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080C14, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX5GCR5_RESERVED_31_MASK | DDR_PHY_DX5GCR5_DXREFISELR3_MASK | DDR_PHY_DX5GCR5_RESERVED_23_MASK | DDR_PHY_DX5GCR5_DXREFISELR2_MASK | DDR_PHY_DX5GCR5_RESERVED_15_MASK | DDR_PHY_DX5GCR5_DXREFISELR1_MASK | DDR_PHY_DX5GCR5_RESERVED_7_MASK | DDR_PHY_DX5GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX5GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX5GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX5GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX5GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX5GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX5GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX5GCR6 @ 0XFD080C18</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX5GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX5GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX5GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX5GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX5GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080C18, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX5GCR6_RESERVED_31_30_MASK | DDR_PHY_DX5GCR6_DXDQVREFR3_MASK | DDR_PHY_DX5GCR6_RESERVED_23_22_MASK | DDR_PHY_DX5GCR6_DXDQVREFR2_MASK | DDR_PHY_DX5GCR6_RESERVED_15_14_MASK | DDR_PHY_DX5GCR6_DXDQVREFR1_MASK | DDR_PHY_DX5GCR6_RESERVED_7_6_MASK | DDR_PHY_DX5GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX5GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX5GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX5GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX5GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX5GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX5GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX5GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX5LCDLR2 @ 0XFD080C88</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX5LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX5LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX5LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX5LCDLR2_DQSGD                                                     0x0

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080C88, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_DX5LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX5LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX5LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX5LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX5LCDLR2_RESERVED_15_9_SHIFT
			| 0x00000000U << DDR_PHY_DX5LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX5LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DX5GTR0 @ 0XFD080CC0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX5GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX5GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX5GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX5GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX5GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX5GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX5GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX5GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD080CC0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX5GTR0_RESERVED_31_24_MASK | DDR_PHY_DX5GTR0_WDQSL_MASK | DDR_PHY_DX5GTR0_RESERVED_23_20_MASK | DDR_PHY_DX5GTR0_WLSL_MASK | DDR_PHY_DX5GTR0_RESERVED_15_13_MASK | DDR_PHY_DX5GTR0_RESERVED_12_8_MASK | DDR_PHY_DX5GTR0_RESERVED_7_5_MASK | DDR_PHY_DX5GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX5GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX5GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX5GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX5GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX5GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX5GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX6GCR0 @ 0XFD080D00</p>

		Calibration Bypass
		PSU_DDR_PHY_DX6GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX6GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX6GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX6GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX6GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX6GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX6GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX6GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX6GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX6GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX6GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX6GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX6GCR0_DQSGPDR                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX6GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX6GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX6GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX6GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080D00, 0xFFFFFFFFU ,0x40800604U)  
		RegMask = (DDR_PHY_DX6GCR0_CALBYP_MASK | DDR_PHY_DX6GCR0_MDLEN_MASK | DDR_PHY_DX6GCR0_CODTSHFT_MASK | DDR_PHY_DX6GCR0_DQSDCC_MASK | DDR_PHY_DX6GCR0_RDDLY_MASK | DDR_PHY_DX6GCR0_RESERVED_19_14_MASK | DDR_PHY_DX6GCR0_DQSNSEPDR_MASK | DDR_PHY_DX6GCR0_DQSSEPDR_MASK | DDR_PHY_DX6GCR0_RTTOAL_MASK | DDR_PHY_DX6GCR0_RTTOH_MASK | DDR_PHY_DX6GCR0_CPDRSHFT_MASK | DDR_PHY_DX6GCR0_DQSRPD_MASK | DDR_PHY_DX6GCR0_DQSGPDR_MASK | DDR_PHY_DX6GCR0_RESERVED_4_MASK | DDR_PHY_DX6GCR0_DQSGODT_MASK | DDR_PHY_DX6GCR0_DQSGOE_MASK | DDR_PHY_DX6GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX6GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX6GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX6GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_DQSRPD_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX6GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
	/*############################################################################################################################ */

		/*Register : DX6GCR1 @ 0XFD080D04</p>

		Enables the PDR mode for DQ[7:0]
		PSU_DDR_PHY_DX6GCR1_DXPDRMODE                                                   0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_DX6GCR1_RESERVED_15                                                 0x0

		Select the delayed or non-delayed read data strobe #
		PSU_DDR_PHY_DX6GCR1_QSNSEL                                                      0x1

		Select the delayed or non-delayed read data strobe
		PSU_DDR_PHY_DX6GCR1_QSSEL                                                       0x1

		Enables Read Data Strobe in a byte lane
		PSU_DDR_PHY_DX6GCR1_OEEN                                                        0x1

		Enables PDR in a byte lane
		PSU_DDR_PHY_DX6GCR1_PDREN                                                       0x1

		Enables ODT/TE in a byte lane
		PSU_DDR_PHY_DX6GCR1_TEEN                                                        0x1

		Enables Write Data strobe in a byte lane
		PSU_DDR_PHY_DX6GCR1_DSEN                                                        0x1

		Enables DM pin in a byte lane
		PSU_DDR_PHY_DX6GCR1_DMEN                                                        0x1

		Enables DQ corresponding to each bit in a byte
		PSU_DDR_PHY_DX6GCR1_DQEN                                                        0xff

		DATX8 n General Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080D04, 0xFFFFFFFFU ,0x00007FFFU)  
		RegMask = (DDR_PHY_DX6GCR1_DXPDRMODE_MASK | DDR_PHY_DX6GCR1_RESERVED_15_MASK | DDR_PHY_DX6GCR1_QSNSEL_MASK | DDR_PHY_DX6GCR1_QSSEL_MASK | DDR_PHY_DX6GCR1_OEEN_MASK | DDR_PHY_DX6GCR1_PDREN_MASK | DDR_PHY_DX6GCR1_TEEN_MASK | DDR_PHY_DX6GCR1_DSEN_MASK | DDR_PHY_DX6GCR1_DMEN_MASK | DDR_PHY_DX6GCR1_DQEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX6GCR1_DXPDRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR1_RESERVED_15_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR1_QSNSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR1_QSSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR1_OEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR1_PDREN_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR1_TEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR1_DSEN_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR1_DMEN_SHIFT
			| 0x000000FFU << DDR_PHY_DX6GCR1_DQEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX6GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
	/*############################################################################################################################ */

		/*Register : DX6GCR4 @ 0XFD080D10</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX6GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX6GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX6GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX6GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX6GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX6GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX6GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX6GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX6GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX6GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080D10, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX6GCR4_RESERVED_31_29_MASK | DDR_PHY_DX6GCR4_DXREFPEN_MASK | DDR_PHY_DX6GCR4_DXREFEEN_MASK | DDR_PHY_DX6GCR4_DXREFSEN_MASK | DDR_PHY_DX6GCR4_RESERVED_24_MASK | DDR_PHY_DX6GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX6GCR4_DXREFESEL_MASK | DDR_PHY_DX6GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX6GCR4_DXREFSSEL_MASK | DDR_PHY_DX6GCR4_RESERVED_7_6_MASK | DDR_PHY_DX6GCR4_DXREFIEN_MASK | DDR_PHY_DX6GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX6GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX6GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX6GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX6GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX6GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX6GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX6GCR5 @ 0XFD080D14</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX6GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX6GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX6GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX6GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080D14, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX6GCR5_RESERVED_31_MASK | DDR_PHY_DX6GCR5_DXREFISELR3_MASK | DDR_PHY_DX6GCR5_RESERVED_23_MASK | DDR_PHY_DX6GCR5_DXREFISELR2_MASK | DDR_PHY_DX6GCR5_RESERVED_15_MASK | DDR_PHY_DX6GCR5_DXREFISELR1_MASK | DDR_PHY_DX6GCR5_RESERVED_7_MASK | DDR_PHY_DX6GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX6GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX6GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX6GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX6GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX6GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX6GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX6GCR6 @ 0XFD080D18</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX6GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX6GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX6GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX6GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX6GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080D18, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX6GCR6_RESERVED_31_30_MASK | DDR_PHY_DX6GCR6_DXDQVREFR3_MASK | DDR_PHY_DX6GCR6_RESERVED_23_22_MASK | DDR_PHY_DX6GCR6_DXDQVREFR2_MASK | DDR_PHY_DX6GCR6_RESERVED_15_14_MASK | DDR_PHY_DX6GCR6_DXDQVREFR1_MASK | DDR_PHY_DX6GCR6_RESERVED_7_6_MASK | DDR_PHY_DX6GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX6GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX6GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX6GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX6GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX6GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX6GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX6GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX6LCDLR2 @ 0XFD080D88</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX6LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX6LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX6LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX6LCDLR2_DQSGD                                                     0x0

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080D88, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_DX6LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX6LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX6LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX6LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX6LCDLR2_RESERVED_15_9_SHIFT
			| 0x00000000U << DDR_PHY_DX6LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX6LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DX6GTR0 @ 0XFD080DC0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX6GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX6GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX6GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX6GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX6GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX6GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX6GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX6GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD080DC0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX6GTR0_RESERVED_31_24_MASK | DDR_PHY_DX6GTR0_WDQSL_MASK | DDR_PHY_DX6GTR0_RESERVED_23_20_MASK | DDR_PHY_DX6GTR0_WLSL_MASK | DDR_PHY_DX6GTR0_RESERVED_15_13_MASK | DDR_PHY_DX6GTR0_RESERVED_12_8_MASK | DDR_PHY_DX6GTR0_RESERVED_7_5_MASK | DDR_PHY_DX6GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX6GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX6GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX6GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX6GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX6GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX6GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX7GCR0 @ 0XFD080E00</p>

		Calibration Bypass
		PSU_DDR_PHY_DX7GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX7GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX7GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX7GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX7GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX7GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX7GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX7GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX7GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX7GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX7GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX7GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX7GCR0_DQSGPDR                                                     0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX7GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX7GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX7GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX7GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080E00, 0xFFFFFFFFU ,0x40800604U)  
		RegMask = (DDR_PHY_DX7GCR0_CALBYP_MASK | DDR_PHY_DX7GCR0_MDLEN_MASK | DDR_PHY_DX7GCR0_CODTSHFT_MASK | DDR_PHY_DX7GCR0_DQSDCC_MASK | DDR_PHY_DX7GCR0_RDDLY_MASK | DDR_PHY_DX7GCR0_RESERVED_19_14_MASK | DDR_PHY_DX7GCR0_DQSNSEPDR_MASK | DDR_PHY_DX7GCR0_DQSSEPDR_MASK | DDR_PHY_DX7GCR0_RTTOAL_MASK | DDR_PHY_DX7GCR0_RTTOH_MASK | DDR_PHY_DX7GCR0_CPDRSHFT_MASK | DDR_PHY_DX7GCR0_DQSRPD_MASK | DDR_PHY_DX7GCR0_DQSGPDR_MASK | DDR_PHY_DX7GCR0_RESERVED_4_MASK | DDR_PHY_DX7GCR0_DQSGODT_MASK | DDR_PHY_DX7GCR0_DQSGOE_MASK | DDR_PHY_DX7GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX7GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX7GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX7GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_DQSRPD_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX7GCR0_OFFSET ,0xFFFFFFFFU ,0x40800604U);
	/*############################################################################################################################ */

		/*Register : DX7GCR1 @ 0XFD080E04</p>

		Enables the PDR mode for DQ[7:0]
		PSU_DDR_PHY_DX7GCR1_DXPDRMODE                                                   0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_DX7GCR1_RESERVED_15                                                 0x0

		Select the delayed or non-delayed read data strobe #
		PSU_DDR_PHY_DX7GCR1_QSNSEL                                                      0x1

		Select the delayed or non-delayed read data strobe
		PSU_DDR_PHY_DX7GCR1_QSSEL                                                       0x1

		Enables Read Data Strobe in a byte lane
		PSU_DDR_PHY_DX7GCR1_OEEN                                                        0x1

		Enables PDR in a byte lane
		PSU_DDR_PHY_DX7GCR1_PDREN                                                       0x1

		Enables ODT/TE in a byte lane
		PSU_DDR_PHY_DX7GCR1_TEEN                                                        0x1

		Enables Write Data strobe in a byte lane
		PSU_DDR_PHY_DX7GCR1_DSEN                                                        0x1

		Enables DM pin in a byte lane
		PSU_DDR_PHY_DX7GCR1_DMEN                                                        0x1

		Enables DQ corresponding to each bit in a byte
		PSU_DDR_PHY_DX7GCR1_DQEN                                                        0xff

		DATX8 n General Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080E04, 0xFFFFFFFFU ,0x00007FFFU)  
		RegMask = (DDR_PHY_DX7GCR1_DXPDRMODE_MASK | DDR_PHY_DX7GCR1_RESERVED_15_MASK | DDR_PHY_DX7GCR1_QSNSEL_MASK | DDR_PHY_DX7GCR1_QSSEL_MASK | DDR_PHY_DX7GCR1_OEEN_MASK | DDR_PHY_DX7GCR1_PDREN_MASK | DDR_PHY_DX7GCR1_TEEN_MASK | DDR_PHY_DX7GCR1_DSEN_MASK | DDR_PHY_DX7GCR1_DMEN_MASK | DDR_PHY_DX7GCR1_DQEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX7GCR1_DXPDRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR1_RESERVED_15_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR1_QSNSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR1_QSSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR1_OEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR1_PDREN_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR1_TEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR1_DSEN_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR1_DMEN_SHIFT
			| 0x000000FFU << DDR_PHY_DX7GCR1_DQEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX7GCR1_OFFSET ,0xFFFFFFFFU ,0x00007FFFU);
	/*############################################################################################################################ */

		/*Register : DX7GCR4 @ 0XFD080E10</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX7GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX7GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX7GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX7GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX7GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX7GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX7GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX7GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX7GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX7GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080E10, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX7GCR4_RESERVED_31_29_MASK | DDR_PHY_DX7GCR4_DXREFPEN_MASK | DDR_PHY_DX7GCR4_DXREFEEN_MASK | DDR_PHY_DX7GCR4_DXREFSEN_MASK | DDR_PHY_DX7GCR4_RESERVED_24_MASK | DDR_PHY_DX7GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX7GCR4_DXREFESEL_MASK | DDR_PHY_DX7GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX7GCR4_DXREFSSEL_MASK | DDR_PHY_DX7GCR4_RESERVED_7_6_MASK | DDR_PHY_DX7GCR4_DXREFIEN_MASK | DDR_PHY_DX7GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX7GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX7GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX7GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX7GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX7GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX7GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX7GCR5 @ 0XFD080E14</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX7GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX7GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX7GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX7GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080E14, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX7GCR5_RESERVED_31_MASK | DDR_PHY_DX7GCR5_DXREFISELR3_MASK | DDR_PHY_DX7GCR5_RESERVED_23_MASK | DDR_PHY_DX7GCR5_DXREFISELR2_MASK | DDR_PHY_DX7GCR5_RESERVED_15_MASK | DDR_PHY_DX7GCR5_DXREFISELR1_MASK | DDR_PHY_DX7GCR5_RESERVED_7_MASK | DDR_PHY_DX7GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX7GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX7GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX7GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX7GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX7GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX7GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX7GCR6 @ 0XFD080E18</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX7GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX7GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX7GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX7GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX7GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080E18, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX7GCR6_RESERVED_31_30_MASK | DDR_PHY_DX7GCR6_DXDQVREFR3_MASK | DDR_PHY_DX7GCR6_RESERVED_23_22_MASK | DDR_PHY_DX7GCR6_DXDQVREFR2_MASK | DDR_PHY_DX7GCR6_RESERVED_15_14_MASK | DDR_PHY_DX7GCR6_DXDQVREFR1_MASK | DDR_PHY_DX7GCR6_RESERVED_7_6_MASK | DDR_PHY_DX7GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX7GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX7GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX7GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX7GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX7GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX7GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX7GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX7LCDLR2 @ 0XFD080E88</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX7LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX7LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX7LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX7LCDLR2_DQSGD                                                     0xa

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080E88, 0xFFFFFFFFU ,0x0000000AU)  
		RegMask = (DDR_PHY_DX7LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX7LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX7LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX7LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX7LCDLR2_RESERVED_15_9_SHIFT
			| 0x0000000AU << DDR_PHY_DX7LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX7LCDLR2_OFFSET ,0xFFFFFFFFU ,0x0000000AU);
	/*############################################################################################################################ */

		/*Register : DX7GTR0 @ 0XFD080EC0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX7GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX7GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX7GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX7GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX7GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX7GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX7GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX7GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD080EC0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX7GTR0_RESERVED_31_24_MASK | DDR_PHY_DX7GTR0_WDQSL_MASK | DDR_PHY_DX7GTR0_RESERVED_23_20_MASK | DDR_PHY_DX7GTR0_WLSL_MASK | DDR_PHY_DX7GTR0_RESERVED_15_13_MASK | DDR_PHY_DX7GTR0_RESERVED_12_8_MASK | DDR_PHY_DX7GTR0_RESERVED_7_5_MASK | DDR_PHY_DX7GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX7GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX7GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX7GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX7GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX7GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX7GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX8GCR0 @ 0XFD080F00</p>

		Calibration Bypass
		PSU_DDR_PHY_DX8GCR0_CALBYP                                                      0x0

		Master Delay Line Enable
		PSU_DDR_PHY_DX8GCR0_MDLEN                                                       0x1

		Configurable ODT(TE) Phase Shift
		PSU_DDR_PHY_DX8GCR0_CODTSHFT                                                    0x0

		DQS Duty Cycle Correction
		PSU_DDR_PHY_DX8GCR0_DQSDCC                                                      0x0

		Number of Cycles ( in terms of ctl_clk) to generate ctl_dx_get_static_rd input for the respective bypte lane of the PHY
		PSU_DDR_PHY_DX8GCR0_RDDLY                                                       0x8

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8GCR0_RESERVED_19_14                                              0x0

		DQSNSE Power Down Receiver
		PSU_DDR_PHY_DX8GCR0_DQSNSEPDR                                                   0x0

		DQSSE Power Down Receiver
		PSU_DDR_PHY_DX8GCR0_DQSSEPDR                                                    0x0

		RTT On Additive Latency
		PSU_DDR_PHY_DX8GCR0_RTTOAL                                                      0x0

		RTT Output Hold
		PSU_DDR_PHY_DX8GCR0_RTTOH                                                       0x3

		Configurable PDR Phase Shift
		PSU_DDR_PHY_DX8GCR0_CPDRSHFT                                                    0x0

		DQSR Power Down
		PSU_DDR_PHY_DX8GCR0_DQSRPD                                                      0x0

		DQSG Power Down Receiver
		PSU_DDR_PHY_DX8GCR0_DQSGPDR                                                     0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8GCR0_RESERVED_4                                                  0x0

		DQSG On-Die Termination
		PSU_DDR_PHY_DX8GCR0_DQSGODT                                                     0x0

		DQSG Output Enable
		PSU_DDR_PHY_DX8GCR0_DQSGOE                                                      0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8GCR0_RESERVED_1_0                                                0x0

		DATX8 n General Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD080F00, 0xFFFFFFFFU ,0x40800624U)  
		RegMask = (DDR_PHY_DX8GCR0_CALBYP_MASK | DDR_PHY_DX8GCR0_MDLEN_MASK | DDR_PHY_DX8GCR0_CODTSHFT_MASK | DDR_PHY_DX8GCR0_DQSDCC_MASK | DDR_PHY_DX8GCR0_RDDLY_MASK | DDR_PHY_DX8GCR0_RESERVED_19_14_MASK | DDR_PHY_DX8GCR0_DQSNSEPDR_MASK | DDR_PHY_DX8GCR0_DQSSEPDR_MASK | DDR_PHY_DX8GCR0_RTTOAL_MASK | DDR_PHY_DX8GCR0_RTTOH_MASK | DDR_PHY_DX8GCR0_CPDRSHFT_MASK | DDR_PHY_DX8GCR0_DQSRPD_MASK | DDR_PHY_DX8GCR0_DQSGPDR_MASK | DDR_PHY_DX8GCR0_RESERVED_4_MASK | DDR_PHY_DX8GCR0_DQSGODT_MASK | DDR_PHY_DX8GCR0_DQSGOE_MASK | DDR_PHY_DX8GCR0_RESERVED_1_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8GCR0_CALBYP_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR0_MDLEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_CODTSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_DQSDCC_SHIFT
			| 0x00000008U << DDR_PHY_DX8GCR0_RDDLY_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_19_14_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_DQSNSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_DQSSEPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_RTTOAL_SHIFT
			| 0x00000003U << DDR_PHY_DX8GCR0_RTTOH_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_CPDRSHFT_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_DQSRPD_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR0_DQSGPDR_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_4_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_DQSGODT_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR0_DQSGOE_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR0_RESERVED_1_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8GCR0_OFFSET ,0xFFFFFFFFU ,0x40800624U);
	/*############################################################################################################################ */

		/*Register : DX8GCR1 @ 0XFD080F04</p>

		Enables the PDR mode for DQ[7:0]
		PSU_DDR_PHY_DX8GCR1_DXPDRMODE                                                   0x0

		Reserved. Returns zeroes on reads.
		PSU_DDR_PHY_DX8GCR1_RESERVED_15                                                 0x0

		Select the delayed or non-delayed read data strobe #
		PSU_DDR_PHY_DX8GCR1_QSNSEL                                                      0x1

		Select the delayed or non-delayed read data strobe
		PSU_DDR_PHY_DX8GCR1_QSSEL                                                       0x1

		Enables Read Data Strobe in a byte lane
		PSU_DDR_PHY_DX8GCR1_OEEN                                                        0x1

		Enables PDR in a byte lane
		PSU_DDR_PHY_DX8GCR1_PDREN                                                       0x1

		Enables ODT/TE in a byte lane
		PSU_DDR_PHY_DX8GCR1_TEEN                                                        0x1

		Enables Write Data strobe in a byte lane
		PSU_DDR_PHY_DX8GCR1_DSEN                                                        0x1

		Enables DM pin in a byte lane
		PSU_DDR_PHY_DX8GCR1_DMEN                                                        0x1

		Enables DQ corresponding to each bit in a byte
		PSU_DDR_PHY_DX8GCR1_DQEN                                                        0x0

		DATX8 n General Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD080F04, 0xFFFFFFFFU ,0x00007F00U)  
		RegMask = (DDR_PHY_DX8GCR1_DXPDRMODE_MASK | DDR_PHY_DX8GCR1_RESERVED_15_MASK | DDR_PHY_DX8GCR1_QSNSEL_MASK | DDR_PHY_DX8GCR1_QSSEL_MASK | DDR_PHY_DX8GCR1_OEEN_MASK | DDR_PHY_DX8GCR1_PDREN_MASK | DDR_PHY_DX8GCR1_TEEN_MASK | DDR_PHY_DX8GCR1_DSEN_MASK | DDR_PHY_DX8GCR1_DMEN_MASK | DDR_PHY_DX8GCR1_DQEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8GCR1_DXPDRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR1_RESERVED_15_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR1_QSNSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR1_QSSEL_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR1_OEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR1_PDREN_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR1_TEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR1_DSEN_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR1_DMEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR1_DQEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8GCR1_OFFSET ,0xFFFFFFFFU ,0x00007F00U);
	/*############################################################################################################################ */

		/*Register : DX8GCR4 @ 0XFD080F10</p>

		Byte lane VREF IOM (Used only by D4MU IOs)
		PSU_DDR_PHY_DX8GCR4_RESERVED_31_29                                              0x0

		Byte Lane VREF Pad Enable
		PSU_DDR_PHY_DX8GCR4_DXREFPEN                                                    0x0

		Byte Lane Internal VREF Enable
		PSU_DDR_PHY_DX8GCR4_DXREFEEN                                                    0x3

		Byte Lane Single-End VREF Enable
		PSU_DDR_PHY_DX8GCR4_DXREFSEN                                                    0x1

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR4_RESERVED_24                                                 0x0

		External VREF generator REFSEL range select
		PSU_DDR_PHY_DX8GCR4_DXREFESELRANGE                                              0x0

		Byte Lane External VREF Select
		PSU_DDR_PHY_DX8GCR4_DXREFESEL                                                   0x0

		Single ended VREF generator REFSEL range select
		PSU_DDR_PHY_DX8GCR4_DXREFSSELRANGE                                              0x1

		Byte Lane Single-End VREF Select
		PSU_DDR_PHY_DX8GCR4_DXREFSSEL                                                   0x30

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR4_RESERVED_7_6                                                0x0

		VREF Enable control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX8GCR4_DXREFIEN                                                    0xf

		VRMON control for DQ IO (Single Ended) buffers of a byte lane.
		PSU_DDR_PHY_DX8GCR4_DXREFIMON                                                   0x0

		DATX8 n General Configuration Register 4
		(OFFSET, MASK, VALUE)      (0XFD080F10, 0xFFFFFFFFU ,0x0E00B03CU)  
		RegMask = (DDR_PHY_DX8GCR4_RESERVED_31_29_MASK | DDR_PHY_DX8GCR4_DXREFPEN_MASK | DDR_PHY_DX8GCR4_DXREFEEN_MASK | DDR_PHY_DX8GCR4_DXREFSEN_MASK | DDR_PHY_DX8GCR4_RESERVED_24_MASK | DDR_PHY_DX8GCR4_DXREFESELRANGE_MASK | DDR_PHY_DX8GCR4_DXREFESEL_MASK | DDR_PHY_DX8GCR4_DXREFSSELRANGE_MASK | DDR_PHY_DX8GCR4_DXREFSSEL_MASK | DDR_PHY_DX8GCR4_RESERVED_7_6_MASK | DDR_PHY_DX8GCR4_DXREFIEN_MASK | DDR_PHY_DX8GCR4_DXREFIMON_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8GCR4_RESERVED_31_29_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFPEN_SHIFT
			| 0x00000003U << DDR_PHY_DX8GCR4_DXREFEEN_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR4_DXREFSEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR4_RESERVED_24_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFESELRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFESEL_SHIFT
			| 0x00000001U << DDR_PHY_DX8GCR4_DXREFSSELRANGE_SHIFT
			| 0x00000030U << DDR_PHY_DX8GCR4_DXREFSSEL_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR4_RESERVED_7_6_SHIFT
			| 0x0000000FU << DDR_PHY_DX8GCR4_DXREFIEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR4_DXREFIMON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8GCR4_OFFSET ,0xFFFFFFFFU ,0x0E00B03CU);
	/*############################################################################################################################ */

		/*Register : DX8GCR5 @ 0XFD080F14</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR5_RESERVED_31                                                 0x0

		Byte Lane internal VREF Select for Rank 3
		PSU_DDR_PHY_DX8GCR5_DXREFISELR3                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR5_RESERVED_23                                                 0x0

		Byte Lane internal VREF Select for Rank 2
		PSU_DDR_PHY_DX8GCR5_DXREFISELR2                                                 0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR5_RESERVED_15                                                 0x0

		Byte Lane internal VREF Select for Rank 1
		PSU_DDR_PHY_DX8GCR5_DXREFISELR1                                                 0x4f

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR5_RESERVED_7                                                  0x0

		Byte Lane internal VREF Select for Rank 0
		PSU_DDR_PHY_DX8GCR5_DXREFISELR0                                                 0x4f

		DATX8 n General Configuration Register 5
		(OFFSET, MASK, VALUE)      (0XFD080F14, 0xFFFFFFFFU ,0x09094F4FU)  
		RegMask = (DDR_PHY_DX8GCR5_RESERVED_31_MASK | DDR_PHY_DX8GCR5_DXREFISELR3_MASK | DDR_PHY_DX8GCR5_RESERVED_23_MASK | DDR_PHY_DX8GCR5_DXREFISELR2_MASK | DDR_PHY_DX8GCR5_RESERVED_15_MASK | DDR_PHY_DX8GCR5_DXREFISELR1_MASK | DDR_PHY_DX8GCR5_RESERVED_7_MASK | DDR_PHY_DX8GCR5_DXREFISELR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8GCR5_RESERVED_31_SHIFT
			| 0x00000009U << DDR_PHY_DX8GCR5_DXREFISELR3_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_23_SHIFT
			| 0x00000009U << DDR_PHY_DX8GCR5_DXREFISELR2_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_15_SHIFT
			| 0x0000004FU << DDR_PHY_DX8GCR5_DXREFISELR1_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR5_RESERVED_7_SHIFT
			| 0x0000004FU << DDR_PHY_DX8GCR5_DXREFISELR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8GCR5_OFFSET ,0xFFFFFFFFU ,0x09094F4FU);
	/*############################################################################################################################ */

		/*Register : DX8GCR6 @ 0XFD080F18</p>

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR6_RESERVED_31_30                                              0x0

		DRAM DQ VREF Select for Rank3
		PSU_DDR_PHY_DX8GCR6_DXDQVREFR3                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR6_RESERVED_23_22                                              0x0

		DRAM DQ VREF Select for Rank2
		PSU_DDR_PHY_DX8GCR6_DXDQVREFR2                                                  0x9

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR6_RESERVED_15_14                                              0x0

		DRAM DQ VREF Select for Rank1
		PSU_DDR_PHY_DX8GCR6_DXDQVREFR1                                                  0x2b

		Reserved. Returns zeros on reads.
		PSU_DDR_PHY_DX8GCR6_RESERVED_7_6                                                0x0

		DRAM DQ VREF Select for Rank0
		PSU_DDR_PHY_DX8GCR6_DXDQVREFR0                                                  0x2b

		DATX8 n General Configuration Register 6
		(OFFSET, MASK, VALUE)      (0XFD080F18, 0xFFFFFFFFU ,0x09092B2BU)  
		RegMask = (DDR_PHY_DX8GCR6_RESERVED_31_30_MASK | DDR_PHY_DX8GCR6_DXDQVREFR3_MASK | DDR_PHY_DX8GCR6_RESERVED_23_22_MASK | DDR_PHY_DX8GCR6_DXDQVREFR2_MASK | DDR_PHY_DX8GCR6_RESERVED_15_14_MASK | DDR_PHY_DX8GCR6_DXDQVREFR1_MASK | DDR_PHY_DX8GCR6_RESERVED_7_6_MASK | DDR_PHY_DX8GCR6_DXDQVREFR0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8GCR6_RESERVED_31_30_SHIFT
			| 0x00000009U << DDR_PHY_DX8GCR6_DXDQVREFR3_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_23_22_SHIFT
			| 0x00000009U << DDR_PHY_DX8GCR6_DXDQVREFR2_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_15_14_SHIFT
			| 0x0000002BU << DDR_PHY_DX8GCR6_DXDQVREFR1_SHIFT
			| 0x00000000U << DDR_PHY_DX8GCR6_RESERVED_7_6_SHIFT
			| 0x0000002BU << DDR_PHY_DX8GCR6_DXDQVREFR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8GCR6_OFFSET ,0xFFFFFFFFU ,0x09092B2BU);
	/*############################################################################################################################ */

		/*Register : DX8LCDLR2 @ 0XFD080F88</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8LCDLR2_RESERVED_31_25                                            0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8LCDLR2_RESERVED_24_16                                            0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8LCDLR2_RESERVED_15_9                                             0x0

		Read DQS Gating Delay
		PSU_DDR_PHY_DX8LCDLR2_DQSGD                                                     0x0

		DATX8 n Local Calibrated Delay Line Register 2
		(OFFSET, MASK, VALUE)      (0XFD080F88, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (DDR_PHY_DX8LCDLR2_RESERVED_31_25_MASK | DDR_PHY_DX8LCDLR2_RESERVED_24_16_MASK | DDR_PHY_DX8LCDLR2_RESERVED_15_9_MASK | DDR_PHY_DX8LCDLR2_DQSGD_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_31_25_SHIFT
			| 0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_24_16_SHIFT
			| 0x00000000U << DDR_PHY_DX8LCDLR2_RESERVED_15_9_SHIFT
			| 0x00000000U << DDR_PHY_DX8LCDLR2_DQSGD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8LCDLR2_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DX8GTR0 @ 0XFD080FC0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8GTR0_RESERVED_31_24                                              0x0

		DQ Write Path Latency Pipeline
		PSU_DDR_PHY_DX8GTR0_WDQSL                                                       0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8GTR0_RESERVED_23_20                                              0x0

		Write Leveling System Latency
		PSU_DDR_PHY_DX8GTR0_WLSL                                                        0x2

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8GTR0_RESERVED_15_13                                              0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8GTR0_RESERVED_12_8                                               0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8GTR0_RESERVED_7_5                                                0x0

		DQS Gating System Latency
		PSU_DDR_PHY_DX8GTR0_DGSL                                                        0x0

		DATX8 n General Timing Register 0
		(OFFSET, MASK, VALUE)      (0XFD080FC0, 0xFFFFFFFFU ,0x00020000U)  
		RegMask = (DDR_PHY_DX8GTR0_RESERVED_31_24_MASK | DDR_PHY_DX8GTR0_WDQSL_MASK | DDR_PHY_DX8GTR0_RESERVED_23_20_MASK | DDR_PHY_DX8GTR0_WLSL_MASK | DDR_PHY_DX8GTR0_RESERVED_15_13_MASK | DDR_PHY_DX8GTR0_RESERVED_12_8_MASK | DDR_PHY_DX8GTR0_RESERVED_7_5_MASK | DDR_PHY_DX8GTR0_DGSL_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8GTR0_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX8GTR0_WDQSL_SHIFT
			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_23_20_SHIFT
			| 0x00000002U << DDR_PHY_DX8GTR0_WLSL_SHIFT
			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_15_13_SHIFT
			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_12_8_SHIFT
			| 0x00000000U << DDR_PHY_DX8GTR0_RESERVED_7_5_SHIFT
			| 0x00000000U << DDR_PHY_DX8GTR0_DGSL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8GTR0_OFFSET ,0xFFFFFFFFU ,0x00020000U);
	/*############################################################################################################################ */

		/*Register : DX8SL0OSC @ 0XFD081400</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0OSC_RESERVED_31_30                                            0x0

		Enable Clock Gating for DX ddr_clk
		PSU_DDR_PHY_DX8SL0OSC_GATEDXRDCLK                                               0x2

		Enable Clock Gating for DX ctl_rd_clk
		PSU_DDR_PHY_DX8SL0OSC_GATEDXDDRCLK                                              0x2

		Enable Clock Gating for DX ctl_clk
		PSU_DDR_PHY_DX8SL0OSC_GATEDXCTLCLK                                              0x2

		Selects the level to which clocks will be stalled when clock gating is enabled.
		PSU_DDR_PHY_DX8SL0OSC_CLKLEVEL                                                  0x0

		Loopback Mode
		PSU_DDR_PHY_DX8SL0OSC_LBMODE                                                    0x0

		Load GSDQS LCDL with 2x the calibrated GSDQSPRD value
		PSU_DDR_PHY_DX8SL0OSC_LBGSDQS                                                   0x0

		Loopback DQS Gating
		PSU_DDR_PHY_DX8SL0OSC_LBGDQS                                                    0x0

		Loopback DQS Shift
		PSU_DDR_PHY_DX8SL0OSC_LBDQSS                                                    0x0

		PHY High-Speed Reset
		PSU_DDR_PHY_DX8SL0OSC_PHYHRST                                                   0x1

		PHY FIFO Reset
		PSU_DDR_PHY_DX8SL0OSC_PHYFRST                                                   0x1

		Delay Line Test Start
		PSU_DDR_PHY_DX8SL0OSC_DLTST                                                     0x0

		Delay Line Test Mode
		PSU_DDR_PHY_DX8SL0OSC_DLTMODE                                                   0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL0OSC_RESERVED_12_11                                            0x3

		Oscillator Mode Write-Data Delay Line Select
		PSU_DDR_PHY_DX8SL0OSC_OSCWDDL                                                   0x3

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL0OSC_RESERVED_8_7                                              0x3

		Oscillator Mode Write-Leveling Delay Line Select
		PSU_DDR_PHY_DX8SL0OSC_OSCWDL                                                    0x3

		Oscillator Mode Division
		PSU_DDR_PHY_DX8SL0OSC_OSCDIV                                                    0xf

		Oscillator Enable
		PSU_DDR_PHY_DX8SL0OSC_OSCEN                                                     0x0

		DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register
		(OFFSET, MASK, VALUE)      (0XFD081400, 0xFFFFFFFFU ,0x2A019FFEU)  
		RegMask = (DDR_PHY_DX8SL0OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL0OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL0OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL0OSC_LBMODE_MASK | DDR_PHY_DX8SL0OSC_LBGSDQS_MASK | DDR_PHY_DX8SL0OSC_LBGDQS_MASK | DDR_PHY_DX8SL0OSC_LBDQSS_MASK | DDR_PHY_DX8SL0OSC_PHYHRST_MASK | DDR_PHY_DX8SL0OSC_PHYFRST_MASK | DDR_PHY_DX8SL0OSC_DLTST_MASK | DDR_PHY_DX8SL0OSC_DLTMODE_MASK | DDR_PHY_DX8SL0OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL0OSC_OSCWDDL_MASK | DDR_PHY_DX8SL0OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL0OSC_OSCWDL_MASK | DDR_PHY_DX8SL0OSC_OSCDIV_MASK | DDR_PHY_DX8SL0OSC_OSCEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL0OSC_RESERVED_31_30_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXRDCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXDDRCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL0OSC_GATEDXCTLCLK_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0OSC_CLKLEVEL_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0OSC_LBMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0OSC_LBGSDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0OSC_LBGDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0OSC_LBDQSS_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL0OSC_PHYHRST_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL0OSC_PHYFRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0OSC_DLTST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0OSC_DLTMODE_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL0OSC_RESERVED_12_11_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL0OSC_OSCWDDL_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL0OSC_RESERVED_8_7_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL0OSC_OSCWDL_SHIFT
			| 0x0000000FU << DDR_PHY_DX8SL0OSC_OSCDIV_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0OSC_OSCEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL0OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU);
	/*############################################################################################################################ */

		/*Register : DX8SL0DQSCTL @ 0XFD08141C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25                                         0x0

		Read Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL0DQSCTL_RRRMODE                                                0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22                                         0x0

		Write Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL0DQSCTL_WRRMODE                                                0x1

		DQS Gate Extension
		PSU_DDR_PHY_DX8SL0DQSCTL_DQSGX                                                  0x0

		Low Power PLL Power Down
		PSU_DDR_PHY_DX8SL0DQSCTL_LPPLLPD                                                0x1

		Low Power I/O Power Down
		PSU_DDR_PHY_DX8SL0DQSCTL_LPIOPD                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15                                         0x0

		QS Counter Enable
		PSU_DDR_PHY_DX8SL0DQSCTL_QSCNTEN                                                0x1

		Unused DQ I/O Mode
		PSU_DDR_PHY_DX8SL0DQSCTL_UDQIOM                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10                                         0x0

		Data Slew Rate
		PSU_DDR_PHY_DX8SL0DQSCTL_DXSR                                                   0x3

		DQS_N Resistor
		PSU_DDR_PHY_DX8SL0DQSCTL_DQSNRES                                                0x0

		DQS Resistor
		PSU_DDR_PHY_DX8SL0DQSCTL_DQSRES                                                 0x0

		DATX8 0-1 DQS Control Register
		(OFFSET, MASK, VALUE)      (0XFD08141C, 0xFFFFFFFFU ,0x01264300U)  
		RegMask = (DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL0DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL0DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL0DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL0DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL0DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL0DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL0DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL0DQSCTL_DXSR_MASK | DDR_PHY_DX8SL0DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL0DQSCTL_DQSRES_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_31_25_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_RRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_23_22_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_WRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSGX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_LPPLLPD_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_LPIOPD_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_16_15_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL0DQSCTL_QSCNTEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_UDQIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_RESERVED_12_10_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL0DQSCTL_DXSR_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSNRES_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DQSCTL_DQSRES_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL0DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U);
	/*############################################################################################################################ */

		/*Register : DX8SL0DXCTL2 @ 0XFD08142C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24                                         0x0

		Configurable Read Data Enable
		PSU_DDR_PHY_DX8SL0DXCTL2_CRDEN                                                  0x0

		OX Extension during Post-amble
		PSU_DDR_PHY_DX8SL0DXCTL2_POSOEX                                                 0x0

		OE Extension during Pre-amble
		PSU_DDR_PHY_DX8SL0DXCTL2_PREOEX                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_17                                            0x0

		I/O Assisted Gate Select
		PSU_DDR_PHY_DX8SL0DXCTL2_IOAG                                                   0x0

		I/O Loopback Select
		PSU_DDR_PHY_DX8SL0DXCTL2_IOLB                                                   0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13                                         0x0

		Low Power Wakeup Threshold
		PSU_DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH                                         0xc

		Read Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL0DXCTL2_RDBI                                                   0x0

		Write Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL0DXCTL2_WDBI                                                   0x0

		PUB Read FIFO Bypass
		PSU_DDR_PHY_DX8SL0DXCTL2_PRFBYP                                                 0x0

		DATX8 Receive FIFO Read Mode
		PSU_DDR_PHY_DX8SL0DXCTL2_RDMODE                                                 0x0

		Disables the Read FIFO Reset
		PSU_DDR_PHY_DX8SL0DXCTL2_DISRST                                                 0x0

		Read DQS Gate I/O Loopback
		PSU_DDR_PHY_DX8SL0DXCTL2_DQSGLB                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0DXCTL2_RESERVED_0                                             0x0

		DATX8 0-1 DX Control Register 2
		(OFFSET, MASK, VALUE)      (0XFD08142C, 0xFFFFFFFFU ,0x00041800U)  
		RegMask = (DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL0DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL0DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL0DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL0DXCTL2_IOAG_MASK | DDR_PHY_DX8SL0DXCTL2_IOLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL0DXCTL2_RDBI_MASK | DDR_PHY_DX8SL0DXCTL2_WDBI_MASK | DDR_PHY_DX8SL0DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL0DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL0DXCTL2_DISRST_MASK | DDR_PHY_DX8SL0DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL0DXCTL2_RESERVED_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_CRDEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_POSOEX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL0DXCTL2_PREOEX_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_17_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOAG_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_IOLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_14_13_SHIFT
			| 0x0000000CU << DDR_PHY_DX8SL0DXCTL2_LPWAKEUP_THRSH_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_WDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_PRFBYP_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RDMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_DISRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_DQSGLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0DXCTL2_RESERVED_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL0DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U);
	/*############################################################################################################################ */

		/*Register : DX8SL0IOCR @ 0XFD081430</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL0IOCR_RESERVED_31                                              0x0

		PVREF_DAC REFSEL range select
		PSU_DDR_PHY_DX8SL0IOCR_DXDACRANGE                                               0x7

		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
		PSU_DDR_PHY_DX8SL0IOCR_DXVREFIOM                                                0x0

		DX IO Mode
		PSU_DDR_PHY_DX8SL0IOCR_DXIOM                                                    0x2

		DX IO Transmitter Mode
		PSU_DDR_PHY_DX8SL0IOCR_DXTXM                                                    0x0

		DX IO Receiver Mode
		PSU_DDR_PHY_DX8SL0IOCR_DXRXM                                                    0x0

		DATX8 0-1 I/O Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD081430, 0xFFFFFFFFU ,0x70800000U)  
		RegMask = (DDR_PHY_DX8SL0IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL0IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL0IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL0IOCR_DXIOM_MASK | DDR_PHY_DX8SL0IOCR_DXTXM_MASK | DDR_PHY_DX8SL0IOCR_DXRXM_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL0IOCR_RESERVED_31_SHIFT
			| 0x00000007U << DDR_PHY_DX8SL0IOCR_DXDACRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXVREFIOM_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL0IOCR_DXIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXTXM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL0IOCR_DXRXM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL0IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
	/*############################################################################################################################ */

		/*Register : DX8SL1OSC @ 0XFD081440</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1OSC_RESERVED_31_30                                            0x0

		Enable Clock Gating for DX ddr_clk
		PSU_DDR_PHY_DX8SL1OSC_GATEDXRDCLK                                               0x2

		Enable Clock Gating for DX ctl_rd_clk
		PSU_DDR_PHY_DX8SL1OSC_GATEDXDDRCLK                                              0x2

		Enable Clock Gating for DX ctl_clk
		PSU_DDR_PHY_DX8SL1OSC_GATEDXCTLCLK                                              0x2

		Selects the level to which clocks will be stalled when clock gating is enabled.
		PSU_DDR_PHY_DX8SL1OSC_CLKLEVEL                                                  0x0

		Loopback Mode
		PSU_DDR_PHY_DX8SL1OSC_LBMODE                                                    0x0

		Load GSDQS LCDL with 2x the calibrated GSDQSPRD value
		PSU_DDR_PHY_DX8SL1OSC_LBGSDQS                                                   0x0

		Loopback DQS Gating
		PSU_DDR_PHY_DX8SL1OSC_LBGDQS                                                    0x0

		Loopback DQS Shift
		PSU_DDR_PHY_DX8SL1OSC_LBDQSS                                                    0x0

		PHY High-Speed Reset
		PSU_DDR_PHY_DX8SL1OSC_PHYHRST                                                   0x1

		PHY FIFO Reset
		PSU_DDR_PHY_DX8SL1OSC_PHYFRST                                                   0x1

		Delay Line Test Start
		PSU_DDR_PHY_DX8SL1OSC_DLTST                                                     0x0

		Delay Line Test Mode
		PSU_DDR_PHY_DX8SL1OSC_DLTMODE                                                   0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL1OSC_RESERVED_12_11                                            0x3

		Oscillator Mode Write-Data Delay Line Select
		PSU_DDR_PHY_DX8SL1OSC_OSCWDDL                                                   0x3

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL1OSC_RESERVED_8_7                                              0x3

		Oscillator Mode Write-Leveling Delay Line Select
		PSU_DDR_PHY_DX8SL1OSC_OSCWDL                                                    0x3

		Oscillator Mode Division
		PSU_DDR_PHY_DX8SL1OSC_OSCDIV                                                    0xf

		Oscillator Enable
		PSU_DDR_PHY_DX8SL1OSC_OSCEN                                                     0x0

		DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register
		(OFFSET, MASK, VALUE)      (0XFD081440, 0xFFFFFFFFU ,0x2A019FFEU)  
		RegMask = (DDR_PHY_DX8SL1OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL1OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL1OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL1OSC_LBMODE_MASK | DDR_PHY_DX8SL1OSC_LBGSDQS_MASK | DDR_PHY_DX8SL1OSC_LBGDQS_MASK | DDR_PHY_DX8SL1OSC_LBDQSS_MASK | DDR_PHY_DX8SL1OSC_PHYHRST_MASK | DDR_PHY_DX8SL1OSC_PHYFRST_MASK | DDR_PHY_DX8SL1OSC_DLTST_MASK | DDR_PHY_DX8SL1OSC_DLTMODE_MASK | DDR_PHY_DX8SL1OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL1OSC_OSCWDDL_MASK | DDR_PHY_DX8SL1OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL1OSC_OSCWDL_MASK | DDR_PHY_DX8SL1OSC_OSCDIV_MASK | DDR_PHY_DX8SL1OSC_OSCEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL1OSC_RESERVED_31_30_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXRDCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXDDRCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL1OSC_GATEDXCTLCLK_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1OSC_CLKLEVEL_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1OSC_LBMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1OSC_LBGSDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1OSC_LBGDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1OSC_LBDQSS_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL1OSC_PHYHRST_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL1OSC_PHYFRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1OSC_DLTST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1OSC_DLTMODE_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL1OSC_RESERVED_12_11_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL1OSC_OSCWDDL_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL1OSC_RESERVED_8_7_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL1OSC_OSCWDL_SHIFT
			| 0x0000000FU << DDR_PHY_DX8SL1OSC_OSCDIV_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1OSC_OSCEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL1OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU);
	/*############################################################################################################################ */

		/*Register : DX8SL1DQSCTL @ 0XFD08145C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25                                         0x0

		Read Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL1DQSCTL_RRRMODE                                                0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22                                         0x0

		Write Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL1DQSCTL_WRRMODE                                                0x1

		DQS Gate Extension
		PSU_DDR_PHY_DX8SL1DQSCTL_DQSGX                                                  0x0

		Low Power PLL Power Down
		PSU_DDR_PHY_DX8SL1DQSCTL_LPPLLPD                                                0x1

		Low Power I/O Power Down
		PSU_DDR_PHY_DX8SL1DQSCTL_LPIOPD                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15                                         0x0

		QS Counter Enable
		PSU_DDR_PHY_DX8SL1DQSCTL_QSCNTEN                                                0x1

		Unused DQ I/O Mode
		PSU_DDR_PHY_DX8SL1DQSCTL_UDQIOM                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10                                         0x0

		Data Slew Rate
		PSU_DDR_PHY_DX8SL1DQSCTL_DXSR                                                   0x3

		DQS_N Resistor
		PSU_DDR_PHY_DX8SL1DQSCTL_DQSNRES                                                0x0

		DQS Resistor
		PSU_DDR_PHY_DX8SL1DQSCTL_DQSRES                                                 0x0

		DATX8 0-1 DQS Control Register
		(OFFSET, MASK, VALUE)      (0XFD08145C, 0xFFFFFFFFU ,0x01264300U)  
		RegMask = (DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL1DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL1DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL1DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL1DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL1DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL1DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL1DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL1DQSCTL_DXSR_MASK | DDR_PHY_DX8SL1DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL1DQSCTL_DQSRES_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_31_25_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_RRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_23_22_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_WRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSGX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_LPPLLPD_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_LPIOPD_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_16_15_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL1DQSCTL_QSCNTEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_UDQIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_RESERVED_12_10_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL1DQSCTL_DXSR_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSNRES_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DQSCTL_DQSRES_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL1DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U);
	/*############################################################################################################################ */

		/*Register : DX8SL1DXCTL2 @ 0XFD08146C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24                                         0x0

		Configurable Read Data Enable
		PSU_DDR_PHY_DX8SL1DXCTL2_CRDEN                                                  0x0

		OX Extension during Post-amble
		PSU_DDR_PHY_DX8SL1DXCTL2_POSOEX                                                 0x0

		OE Extension during Pre-amble
		PSU_DDR_PHY_DX8SL1DXCTL2_PREOEX                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_17                                            0x0

		I/O Assisted Gate Select
		PSU_DDR_PHY_DX8SL1DXCTL2_IOAG                                                   0x0

		I/O Loopback Select
		PSU_DDR_PHY_DX8SL1DXCTL2_IOLB                                                   0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13                                         0x0

		Low Power Wakeup Threshold
		PSU_DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH                                         0xc

		Read Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL1DXCTL2_RDBI                                                   0x0

		Write Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL1DXCTL2_WDBI                                                   0x0

		PUB Read FIFO Bypass
		PSU_DDR_PHY_DX8SL1DXCTL2_PRFBYP                                                 0x0

		DATX8 Receive FIFO Read Mode
		PSU_DDR_PHY_DX8SL1DXCTL2_RDMODE                                                 0x0

		Disables the Read FIFO Reset
		PSU_DDR_PHY_DX8SL1DXCTL2_DISRST                                                 0x0

		Read DQS Gate I/O Loopback
		PSU_DDR_PHY_DX8SL1DXCTL2_DQSGLB                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1DXCTL2_RESERVED_0                                             0x0

		DATX8 0-1 DX Control Register 2
		(OFFSET, MASK, VALUE)      (0XFD08146C, 0xFFFFFFFFU ,0x00041800U)  
		RegMask = (DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL1DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL1DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL1DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL1DXCTL2_IOAG_MASK | DDR_PHY_DX8SL1DXCTL2_IOLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL1DXCTL2_RDBI_MASK | DDR_PHY_DX8SL1DXCTL2_WDBI_MASK | DDR_PHY_DX8SL1DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL1DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL1DXCTL2_DISRST_MASK | DDR_PHY_DX8SL1DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL1DXCTL2_RESERVED_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_CRDEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_POSOEX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL1DXCTL2_PREOEX_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_17_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOAG_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_IOLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_14_13_SHIFT
			| 0x0000000CU << DDR_PHY_DX8SL1DXCTL2_LPWAKEUP_THRSH_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_WDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_PRFBYP_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RDMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_DISRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_DQSGLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1DXCTL2_RESERVED_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL1DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U);
	/*############################################################################################################################ */

		/*Register : DX8SL1IOCR @ 0XFD081470</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL1IOCR_RESERVED_31                                              0x0

		PVREF_DAC REFSEL range select
		PSU_DDR_PHY_DX8SL1IOCR_DXDACRANGE                                               0x7

		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
		PSU_DDR_PHY_DX8SL1IOCR_DXVREFIOM                                                0x0

		DX IO Mode
		PSU_DDR_PHY_DX8SL1IOCR_DXIOM                                                    0x2

		DX IO Transmitter Mode
		PSU_DDR_PHY_DX8SL1IOCR_DXTXM                                                    0x0

		DX IO Receiver Mode
		PSU_DDR_PHY_DX8SL1IOCR_DXRXM                                                    0x0

		DATX8 0-1 I/O Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD081470, 0xFFFFFFFFU ,0x70800000U)  
		RegMask = (DDR_PHY_DX8SL1IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL1IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL1IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL1IOCR_DXIOM_MASK | DDR_PHY_DX8SL1IOCR_DXTXM_MASK | DDR_PHY_DX8SL1IOCR_DXRXM_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL1IOCR_RESERVED_31_SHIFT
			| 0x00000007U << DDR_PHY_DX8SL1IOCR_DXDACRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXVREFIOM_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL1IOCR_DXIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXTXM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL1IOCR_DXRXM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL1IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
	/*############################################################################################################################ */

		/*Register : DX8SL2OSC @ 0XFD081480</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2OSC_RESERVED_31_30                                            0x0

		Enable Clock Gating for DX ddr_clk
		PSU_DDR_PHY_DX8SL2OSC_GATEDXRDCLK                                               0x2

		Enable Clock Gating for DX ctl_rd_clk
		PSU_DDR_PHY_DX8SL2OSC_GATEDXDDRCLK                                              0x2

		Enable Clock Gating for DX ctl_clk
		PSU_DDR_PHY_DX8SL2OSC_GATEDXCTLCLK                                              0x2

		Selects the level to which clocks will be stalled when clock gating is enabled.
		PSU_DDR_PHY_DX8SL2OSC_CLKLEVEL                                                  0x0

		Loopback Mode
		PSU_DDR_PHY_DX8SL2OSC_LBMODE                                                    0x0

		Load GSDQS LCDL with 2x the calibrated GSDQSPRD value
		PSU_DDR_PHY_DX8SL2OSC_LBGSDQS                                                   0x0

		Loopback DQS Gating
		PSU_DDR_PHY_DX8SL2OSC_LBGDQS                                                    0x0

		Loopback DQS Shift
		PSU_DDR_PHY_DX8SL2OSC_LBDQSS                                                    0x0

		PHY High-Speed Reset
		PSU_DDR_PHY_DX8SL2OSC_PHYHRST                                                   0x1

		PHY FIFO Reset
		PSU_DDR_PHY_DX8SL2OSC_PHYFRST                                                   0x1

		Delay Line Test Start
		PSU_DDR_PHY_DX8SL2OSC_DLTST                                                     0x0

		Delay Line Test Mode
		PSU_DDR_PHY_DX8SL2OSC_DLTMODE                                                   0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL2OSC_RESERVED_12_11                                            0x3

		Oscillator Mode Write-Data Delay Line Select
		PSU_DDR_PHY_DX8SL2OSC_OSCWDDL                                                   0x3

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL2OSC_RESERVED_8_7                                              0x3

		Oscillator Mode Write-Leveling Delay Line Select
		PSU_DDR_PHY_DX8SL2OSC_OSCWDL                                                    0x3

		Oscillator Mode Division
		PSU_DDR_PHY_DX8SL2OSC_OSCDIV                                                    0xf

		Oscillator Enable
		PSU_DDR_PHY_DX8SL2OSC_OSCEN                                                     0x0

		DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register
		(OFFSET, MASK, VALUE)      (0XFD081480, 0xFFFFFFFFU ,0x2A019FFEU)  
		RegMask = (DDR_PHY_DX8SL2OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL2OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL2OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL2OSC_LBMODE_MASK | DDR_PHY_DX8SL2OSC_LBGSDQS_MASK | DDR_PHY_DX8SL2OSC_LBGDQS_MASK | DDR_PHY_DX8SL2OSC_LBDQSS_MASK | DDR_PHY_DX8SL2OSC_PHYHRST_MASK | DDR_PHY_DX8SL2OSC_PHYFRST_MASK | DDR_PHY_DX8SL2OSC_DLTST_MASK | DDR_PHY_DX8SL2OSC_DLTMODE_MASK | DDR_PHY_DX8SL2OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL2OSC_OSCWDDL_MASK | DDR_PHY_DX8SL2OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL2OSC_OSCWDL_MASK | DDR_PHY_DX8SL2OSC_OSCDIV_MASK | DDR_PHY_DX8SL2OSC_OSCEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL2OSC_RESERVED_31_30_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXRDCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXDDRCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL2OSC_GATEDXCTLCLK_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2OSC_CLKLEVEL_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2OSC_LBMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2OSC_LBGSDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2OSC_LBGDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2OSC_LBDQSS_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL2OSC_PHYHRST_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL2OSC_PHYFRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2OSC_DLTST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2OSC_DLTMODE_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL2OSC_RESERVED_12_11_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL2OSC_OSCWDDL_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL2OSC_RESERVED_8_7_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL2OSC_OSCWDL_SHIFT
			| 0x0000000FU << DDR_PHY_DX8SL2OSC_OSCDIV_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2OSC_OSCEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL2OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU);
	/*############################################################################################################################ */

		/*Register : DX8SL2DQSCTL @ 0XFD08149C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25                                         0x0

		Read Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL2DQSCTL_RRRMODE                                                0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22                                         0x0

		Write Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL2DQSCTL_WRRMODE                                                0x1

		DQS Gate Extension
		PSU_DDR_PHY_DX8SL2DQSCTL_DQSGX                                                  0x0

		Low Power PLL Power Down
		PSU_DDR_PHY_DX8SL2DQSCTL_LPPLLPD                                                0x1

		Low Power I/O Power Down
		PSU_DDR_PHY_DX8SL2DQSCTL_LPIOPD                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15                                         0x0

		QS Counter Enable
		PSU_DDR_PHY_DX8SL2DQSCTL_QSCNTEN                                                0x1

		Unused DQ I/O Mode
		PSU_DDR_PHY_DX8SL2DQSCTL_UDQIOM                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10                                         0x0

		Data Slew Rate
		PSU_DDR_PHY_DX8SL2DQSCTL_DXSR                                                   0x3

		DQS_N Resistor
		PSU_DDR_PHY_DX8SL2DQSCTL_DQSNRES                                                0x0

		DQS Resistor
		PSU_DDR_PHY_DX8SL2DQSCTL_DQSRES                                                 0x0

		DATX8 0-1 DQS Control Register
		(OFFSET, MASK, VALUE)      (0XFD08149C, 0xFFFFFFFFU ,0x01264300U)  
		RegMask = (DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL2DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL2DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL2DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL2DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL2DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL2DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL2DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL2DQSCTL_DXSR_MASK | DDR_PHY_DX8SL2DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL2DQSCTL_DQSRES_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_31_25_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_RRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_23_22_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_WRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSGX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_LPPLLPD_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_LPIOPD_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_16_15_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL2DQSCTL_QSCNTEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_UDQIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_RESERVED_12_10_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL2DQSCTL_DXSR_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSNRES_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DQSCTL_DQSRES_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL2DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U);
	/*############################################################################################################################ */

		/*Register : DX8SL2DXCTL2 @ 0XFD0814AC</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24                                         0x0

		Configurable Read Data Enable
		PSU_DDR_PHY_DX8SL2DXCTL2_CRDEN                                                  0x0

		OX Extension during Post-amble
		PSU_DDR_PHY_DX8SL2DXCTL2_POSOEX                                                 0x0

		OE Extension during Pre-amble
		PSU_DDR_PHY_DX8SL2DXCTL2_PREOEX                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_17                                            0x0

		I/O Assisted Gate Select
		PSU_DDR_PHY_DX8SL2DXCTL2_IOAG                                                   0x0

		I/O Loopback Select
		PSU_DDR_PHY_DX8SL2DXCTL2_IOLB                                                   0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13                                         0x0

		Low Power Wakeup Threshold
		PSU_DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH                                         0xc

		Read Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL2DXCTL2_RDBI                                                   0x0

		Write Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL2DXCTL2_WDBI                                                   0x0

		PUB Read FIFO Bypass
		PSU_DDR_PHY_DX8SL2DXCTL2_PRFBYP                                                 0x0

		DATX8 Receive FIFO Read Mode
		PSU_DDR_PHY_DX8SL2DXCTL2_RDMODE                                                 0x0

		Disables the Read FIFO Reset
		PSU_DDR_PHY_DX8SL2DXCTL2_DISRST                                                 0x0

		Read DQS Gate I/O Loopback
		PSU_DDR_PHY_DX8SL2DXCTL2_DQSGLB                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2DXCTL2_RESERVED_0                                             0x0

		DATX8 0-1 DX Control Register 2
		(OFFSET, MASK, VALUE)      (0XFD0814AC, 0xFFFFFFFFU ,0x00041800U)  
		RegMask = (DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL2DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL2DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL2DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL2DXCTL2_IOAG_MASK | DDR_PHY_DX8SL2DXCTL2_IOLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL2DXCTL2_RDBI_MASK | DDR_PHY_DX8SL2DXCTL2_WDBI_MASK | DDR_PHY_DX8SL2DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL2DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL2DXCTL2_DISRST_MASK | DDR_PHY_DX8SL2DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL2DXCTL2_RESERVED_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_CRDEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_POSOEX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL2DXCTL2_PREOEX_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_17_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOAG_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_IOLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_14_13_SHIFT
			| 0x0000000CU << DDR_PHY_DX8SL2DXCTL2_LPWAKEUP_THRSH_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_WDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_PRFBYP_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RDMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_DISRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_DQSGLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2DXCTL2_RESERVED_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL2DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U);
	/*############################################################################################################################ */

		/*Register : DX8SL2IOCR @ 0XFD0814B0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL2IOCR_RESERVED_31                                              0x0

		PVREF_DAC REFSEL range select
		PSU_DDR_PHY_DX8SL2IOCR_DXDACRANGE                                               0x7

		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
		PSU_DDR_PHY_DX8SL2IOCR_DXVREFIOM                                                0x0

		DX IO Mode
		PSU_DDR_PHY_DX8SL2IOCR_DXIOM                                                    0x2

		DX IO Transmitter Mode
		PSU_DDR_PHY_DX8SL2IOCR_DXTXM                                                    0x0

		DX IO Receiver Mode
		PSU_DDR_PHY_DX8SL2IOCR_DXRXM                                                    0x0

		DATX8 0-1 I/O Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD0814B0, 0xFFFFFFFFU ,0x70800000U)  
		RegMask = (DDR_PHY_DX8SL2IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL2IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL2IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL2IOCR_DXIOM_MASK | DDR_PHY_DX8SL2IOCR_DXTXM_MASK | DDR_PHY_DX8SL2IOCR_DXRXM_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL2IOCR_RESERVED_31_SHIFT
			| 0x00000007U << DDR_PHY_DX8SL2IOCR_DXDACRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXVREFIOM_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL2IOCR_DXIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXTXM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL2IOCR_DXRXM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL2IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
	/*############################################################################################################################ */

		/*Register : DX8SL3OSC @ 0XFD0814C0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3OSC_RESERVED_31_30                                            0x0

		Enable Clock Gating for DX ddr_clk
		PSU_DDR_PHY_DX8SL3OSC_GATEDXRDCLK                                               0x2

		Enable Clock Gating for DX ctl_rd_clk
		PSU_DDR_PHY_DX8SL3OSC_GATEDXDDRCLK                                              0x2

		Enable Clock Gating for DX ctl_clk
		PSU_DDR_PHY_DX8SL3OSC_GATEDXCTLCLK                                              0x2

		Selects the level to which clocks will be stalled when clock gating is enabled.
		PSU_DDR_PHY_DX8SL3OSC_CLKLEVEL                                                  0x0

		Loopback Mode
		PSU_DDR_PHY_DX8SL3OSC_LBMODE                                                    0x0

		Load GSDQS LCDL with 2x the calibrated GSDQSPRD value
		PSU_DDR_PHY_DX8SL3OSC_LBGSDQS                                                   0x0

		Loopback DQS Gating
		PSU_DDR_PHY_DX8SL3OSC_LBGDQS                                                    0x0

		Loopback DQS Shift
		PSU_DDR_PHY_DX8SL3OSC_LBDQSS                                                    0x0

		PHY High-Speed Reset
		PSU_DDR_PHY_DX8SL3OSC_PHYHRST                                                   0x1

		PHY FIFO Reset
		PSU_DDR_PHY_DX8SL3OSC_PHYFRST                                                   0x1

		Delay Line Test Start
		PSU_DDR_PHY_DX8SL3OSC_DLTST                                                     0x0

		Delay Line Test Mode
		PSU_DDR_PHY_DX8SL3OSC_DLTMODE                                                   0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL3OSC_RESERVED_12_11                                            0x3

		Oscillator Mode Write-Data Delay Line Select
		PSU_DDR_PHY_DX8SL3OSC_OSCWDDL                                                   0x3

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL3OSC_RESERVED_8_7                                              0x3

		Oscillator Mode Write-Leveling Delay Line Select
		PSU_DDR_PHY_DX8SL3OSC_OSCWDL                                                    0x3

		Oscillator Mode Division
		PSU_DDR_PHY_DX8SL3OSC_OSCDIV                                                    0xf

		Oscillator Enable
		PSU_DDR_PHY_DX8SL3OSC_OSCEN                                                     0x0

		DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register
		(OFFSET, MASK, VALUE)      (0XFD0814C0, 0xFFFFFFFFU ,0x2A019FFEU)  
		RegMask = (DDR_PHY_DX8SL3OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL3OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL3OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL3OSC_LBMODE_MASK | DDR_PHY_DX8SL3OSC_LBGSDQS_MASK | DDR_PHY_DX8SL3OSC_LBGDQS_MASK | DDR_PHY_DX8SL3OSC_LBDQSS_MASK | DDR_PHY_DX8SL3OSC_PHYHRST_MASK | DDR_PHY_DX8SL3OSC_PHYFRST_MASK | DDR_PHY_DX8SL3OSC_DLTST_MASK | DDR_PHY_DX8SL3OSC_DLTMODE_MASK | DDR_PHY_DX8SL3OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL3OSC_OSCWDDL_MASK | DDR_PHY_DX8SL3OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL3OSC_OSCWDL_MASK | DDR_PHY_DX8SL3OSC_OSCDIV_MASK | DDR_PHY_DX8SL3OSC_OSCEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL3OSC_RESERVED_31_30_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXRDCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXDDRCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL3OSC_GATEDXCTLCLK_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3OSC_CLKLEVEL_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3OSC_LBMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3OSC_LBGSDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3OSC_LBGDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3OSC_LBDQSS_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL3OSC_PHYHRST_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL3OSC_PHYFRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3OSC_DLTST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3OSC_DLTMODE_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL3OSC_RESERVED_12_11_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL3OSC_OSCWDDL_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL3OSC_RESERVED_8_7_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL3OSC_OSCWDL_SHIFT
			| 0x0000000FU << DDR_PHY_DX8SL3OSC_OSCDIV_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3OSC_OSCEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL3OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU);
	/*############################################################################################################################ */

		/*Register : DX8SL3DQSCTL @ 0XFD0814DC</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25                                         0x0

		Read Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL3DQSCTL_RRRMODE                                                0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22                                         0x0

		Write Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL3DQSCTL_WRRMODE                                                0x1

		DQS Gate Extension
		PSU_DDR_PHY_DX8SL3DQSCTL_DQSGX                                                  0x0

		Low Power PLL Power Down
		PSU_DDR_PHY_DX8SL3DQSCTL_LPPLLPD                                                0x1

		Low Power I/O Power Down
		PSU_DDR_PHY_DX8SL3DQSCTL_LPIOPD                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15                                         0x0

		QS Counter Enable
		PSU_DDR_PHY_DX8SL3DQSCTL_QSCNTEN                                                0x1

		Unused DQ I/O Mode
		PSU_DDR_PHY_DX8SL3DQSCTL_UDQIOM                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10                                         0x0

		Data Slew Rate
		PSU_DDR_PHY_DX8SL3DQSCTL_DXSR                                                   0x3

		DQS_N Resistor
		PSU_DDR_PHY_DX8SL3DQSCTL_DQSNRES                                                0x0

		DQS Resistor
		PSU_DDR_PHY_DX8SL3DQSCTL_DQSRES                                                 0x0

		DATX8 0-1 DQS Control Register
		(OFFSET, MASK, VALUE)      (0XFD0814DC, 0xFFFFFFFFU ,0x01264300U)  
		RegMask = (DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL3DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL3DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL3DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL3DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL3DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL3DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL3DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL3DQSCTL_DXSR_MASK | DDR_PHY_DX8SL3DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL3DQSCTL_DQSRES_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_31_25_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_RRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_23_22_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_WRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSGX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_LPPLLPD_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_LPIOPD_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_16_15_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL3DQSCTL_QSCNTEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_UDQIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_RESERVED_12_10_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL3DQSCTL_DXSR_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSNRES_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DQSCTL_DQSRES_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL3DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U);
	/*############################################################################################################################ */

		/*Register : DX8SL3DXCTL2 @ 0XFD0814EC</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24                                         0x0

		Configurable Read Data Enable
		PSU_DDR_PHY_DX8SL3DXCTL2_CRDEN                                                  0x0

		OX Extension during Post-amble
		PSU_DDR_PHY_DX8SL3DXCTL2_POSOEX                                                 0x0

		OE Extension during Pre-amble
		PSU_DDR_PHY_DX8SL3DXCTL2_PREOEX                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_17                                            0x0

		I/O Assisted Gate Select
		PSU_DDR_PHY_DX8SL3DXCTL2_IOAG                                                   0x0

		I/O Loopback Select
		PSU_DDR_PHY_DX8SL3DXCTL2_IOLB                                                   0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13                                         0x0

		Low Power Wakeup Threshold
		PSU_DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH                                         0xc

		Read Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL3DXCTL2_RDBI                                                   0x0

		Write Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL3DXCTL2_WDBI                                                   0x0

		PUB Read FIFO Bypass
		PSU_DDR_PHY_DX8SL3DXCTL2_PRFBYP                                                 0x0

		DATX8 Receive FIFO Read Mode
		PSU_DDR_PHY_DX8SL3DXCTL2_RDMODE                                                 0x0

		Disables the Read FIFO Reset
		PSU_DDR_PHY_DX8SL3DXCTL2_DISRST                                                 0x0

		Read DQS Gate I/O Loopback
		PSU_DDR_PHY_DX8SL3DXCTL2_DQSGLB                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3DXCTL2_RESERVED_0                                             0x0

		DATX8 0-1 DX Control Register 2
		(OFFSET, MASK, VALUE)      (0XFD0814EC, 0xFFFFFFFFU ,0x00041800U)  
		RegMask = (DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL3DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL3DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL3DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL3DXCTL2_IOAG_MASK | DDR_PHY_DX8SL3DXCTL2_IOLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL3DXCTL2_RDBI_MASK | DDR_PHY_DX8SL3DXCTL2_WDBI_MASK | DDR_PHY_DX8SL3DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL3DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL3DXCTL2_DISRST_MASK | DDR_PHY_DX8SL3DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL3DXCTL2_RESERVED_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_CRDEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_POSOEX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL3DXCTL2_PREOEX_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_17_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOAG_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_IOLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_14_13_SHIFT
			| 0x0000000CU << DDR_PHY_DX8SL3DXCTL2_LPWAKEUP_THRSH_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_WDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_PRFBYP_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RDMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_DISRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_DQSGLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3DXCTL2_RESERVED_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL3DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U);
	/*############################################################################################################################ */

		/*Register : DX8SL3IOCR @ 0XFD0814F0</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL3IOCR_RESERVED_31                                              0x0

		PVREF_DAC REFSEL range select
		PSU_DDR_PHY_DX8SL3IOCR_DXDACRANGE                                               0x7

		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
		PSU_DDR_PHY_DX8SL3IOCR_DXVREFIOM                                                0x0

		DX IO Mode
		PSU_DDR_PHY_DX8SL3IOCR_DXIOM                                                    0x2

		DX IO Transmitter Mode
		PSU_DDR_PHY_DX8SL3IOCR_DXTXM                                                    0x0

		DX IO Receiver Mode
		PSU_DDR_PHY_DX8SL3IOCR_DXRXM                                                    0x0

		DATX8 0-1 I/O Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD0814F0, 0xFFFFFFFFU ,0x70800000U)  
		RegMask = (DDR_PHY_DX8SL3IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL3IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL3IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL3IOCR_DXIOM_MASK | DDR_PHY_DX8SL3IOCR_DXTXM_MASK | DDR_PHY_DX8SL3IOCR_DXRXM_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL3IOCR_RESERVED_31_SHIFT
			| 0x00000007U << DDR_PHY_DX8SL3IOCR_DXDACRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXVREFIOM_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL3IOCR_DXIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXTXM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL3IOCR_DXRXM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL3IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
	/*############################################################################################################################ */

		/*Register : DX8SL4OSC @ 0XFD081500</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4OSC_RESERVED_31_30                                            0x0

		Enable Clock Gating for DX ddr_clk
		PSU_DDR_PHY_DX8SL4OSC_GATEDXRDCLK                                               0x2

		Enable Clock Gating for DX ctl_rd_clk
		PSU_DDR_PHY_DX8SL4OSC_GATEDXDDRCLK                                              0x2

		Enable Clock Gating for DX ctl_clk
		PSU_DDR_PHY_DX8SL4OSC_GATEDXCTLCLK                                              0x2

		Selects the level to which clocks will be stalled when clock gating is enabled.
		PSU_DDR_PHY_DX8SL4OSC_CLKLEVEL                                                  0x0

		Loopback Mode
		PSU_DDR_PHY_DX8SL4OSC_LBMODE                                                    0x0

		Load GSDQS LCDL with 2x the calibrated GSDQSPRD value
		PSU_DDR_PHY_DX8SL4OSC_LBGSDQS                                                   0x0

		Loopback DQS Gating
		PSU_DDR_PHY_DX8SL4OSC_LBGDQS                                                    0x0

		Loopback DQS Shift
		PSU_DDR_PHY_DX8SL4OSC_LBDQSS                                                    0x0

		PHY High-Speed Reset
		PSU_DDR_PHY_DX8SL4OSC_PHYHRST                                                   0x1

		PHY FIFO Reset
		PSU_DDR_PHY_DX8SL4OSC_PHYFRST                                                   0x1

		Delay Line Test Start
		PSU_DDR_PHY_DX8SL4OSC_DLTST                                                     0x0

		Delay Line Test Mode
		PSU_DDR_PHY_DX8SL4OSC_DLTMODE                                                   0x0

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL4OSC_RESERVED_12_11                                            0x3

		Oscillator Mode Write-Data Delay Line Select
		PSU_DDR_PHY_DX8SL4OSC_OSCWDDL                                                   0x3

		Reserved. Caution, do not write to this register field.
		PSU_DDR_PHY_DX8SL4OSC_RESERVED_8_7                                              0x3

		Oscillator Mode Write-Leveling Delay Line Select
		PSU_DDR_PHY_DX8SL4OSC_OSCWDL                                                    0x3

		Oscillator Mode Division
		PSU_DDR_PHY_DX8SL4OSC_OSCDIV                                                    0xf

		Oscillator Enable
		PSU_DDR_PHY_DX8SL4OSC_OSCEN                                                     0x0

		DATX8 0-1 Oscillator, Delay Line Test, PHY FIFO and High Speed Reset, Loopback, and Gated Clock Control Register
		(OFFSET, MASK, VALUE)      (0XFD081500, 0xFFFFFFFFU ,0x2A019FFEU)  
		RegMask = (DDR_PHY_DX8SL4OSC_RESERVED_31_30_MASK | DDR_PHY_DX8SL4OSC_GATEDXRDCLK_MASK | DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_MASK | DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_MASK | DDR_PHY_DX8SL4OSC_CLKLEVEL_MASK | DDR_PHY_DX8SL4OSC_LBMODE_MASK | DDR_PHY_DX8SL4OSC_LBGSDQS_MASK | DDR_PHY_DX8SL4OSC_LBGDQS_MASK | DDR_PHY_DX8SL4OSC_LBDQSS_MASK | DDR_PHY_DX8SL4OSC_PHYHRST_MASK | DDR_PHY_DX8SL4OSC_PHYFRST_MASK | DDR_PHY_DX8SL4OSC_DLTST_MASK | DDR_PHY_DX8SL4OSC_DLTMODE_MASK | DDR_PHY_DX8SL4OSC_RESERVED_12_11_MASK | DDR_PHY_DX8SL4OSC_OSCWDDL_MASK | DDR_PHY_DX8SL4OSC_RESERVED_8_7_MASK | DDR_PHY_DX8SL4OSC_OSCWDL_MASK | DDR_PHY_DX8SL4OSC_OSCDIV_MASK | DDR_PHY_DX8SL4OSC_OSCEN_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL4OSC_RESERVED_31_30_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXRDCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXDDRCLK_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL4OSC_GATEDXCTLCLK_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4OSC_CLKLEVEL_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4OSC_LBMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4OSC_LBGSDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4OSC_LBGDQS_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4OSC_LBDQSS_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL4OSC_PHYHRST_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL4OSC_PHYFRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4OSC_DLTST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4OSC_DLTMODE_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL4OSC_RESERVED_12_11_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL4OSC_OSCWDDL_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL4OSC_RESERVED_8_7_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL4OSC_OSCWDL_SHIFT
			| 0x0000000FU << DDR_PHY_DX8SL4OSC_OSCDIV_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4OSC_OSCEN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL4OSC_OFFSET ,0xFFFFFFFFU ,0x2A019FFEU);
	/*############################################################################################################################ */

		/*Register : DX8SL4DQSCTL @ 0XFD08151C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25                                         0x0

		Read Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL4DQSCTL_RRRMODE                                                0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22                                         0x0

		Write Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SL4DQSCTL_WRRMODE                                                0x1

		DQS Gate Extension
		PSU_DDR_PHY_DX8SL4DQSCTL_DQSGX                                                  0x0

		Low Power PLL Power Down
		PSU_DDR_PHY_DX8SL4DQSCTL_LPPLLPD                                                0x1

		Low Power I/O Power Down
		PSU_DDR_PHY_DX8SL4DQSCTL_LPIOPD                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15                                         0x0

		QS Counter Enable
		PSU_DDR_PHY_DX8SL4DQSCTL_QSCNTEN                                                0x1

		Unused DQ I/O Mode
		PSU_DDR_PHY_DX8SL4DQSCTL_UDQIOM                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10                                         0x0

		Data Slew Rate
		PSU_DDR_PHY_DX8SL4DQSCTL_DXSR                                                   0x3

		DQS_N Resistor
		PSU_DDR_PHY_DX8SL4DQSCTL_DQSNRES                                                0x0

		DQS Resistor
		PSU_DDR_PHY_DX8SL4DQSCTL_DQSRES                                                 0x0

		DATX8 0-1 DQS Control Register
		(OFFSET, MASK, VALUE)      (0XFD08151C, 0xFFFFFFFFU ,0x01264300U)  
		RegMask = (DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SL4DQSCTL_RRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SL4DQSCTL_WRRMODE_MASK | DDR_PHY_DX8SL4DQSCTL_DQSGX_MASK | DDR_PHY_DX8SL4DQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SL4DQSCTL_LPIOPD_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SL4DQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SL4DQSCTL_UDQIOM_MASK | DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SL4DQSCTL_DXSR_MASK | DDR_PHY_DX8SL4DQSCTL_DQSNRES_MASK | DDR_PHY_DX8SL4DQSCTL_DQSRES_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_31_25_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_RRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_23_22_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_WRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSGX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_LPPLLPD_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_LPIOPD_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_16_15_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL4DQSCTL_QSCNTEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_UDQIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_RESERVED_12_10_SHIFT
			| 0x00000003U << DDR_PHY_DX8SL4DQSCTL_DXSR_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSNRES_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DQSCTL_DQSRES_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL4DQSCTL_OFFSET ,0xFFFFFFFFU ,0x01264300U);
	/*############################################################################################################################ */

		/*Register : DX8SL4DXCTL2 @ 0XFD08152C</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24                                         0x0

		Configurable Read Data Enable
		PSU_DDR_PHY_DX8SL4DXCTL2_CRDEN                                                  0x0

		OX Extension during Post-amble
		PSU_DDR_PHY_DX8SL4DXCTL2_POSOEX                                                 0x0

		OE Extension during Pre-amble
		PSU_DDR_PHY_DX8SL4DXCTL2_PREOEX                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_17                                            0x0

		I/O Assisted Gate Select
		PSU_DDR_PHY_DX8SL4DXCTL2_IOAG                                                   0x0

		I/O Loopback Select
		PSU_DDR_PHY_DX8SL4DXCTL2_IOLB                                                   0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13                                         0x0

		Low Power Wakeup Threshold
		PSU_DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH                                         0xc

		Read Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL4DXCTL2_RDBI                                                   0x0

		Write Data Bus Inversion Enable
		PSU_DDR_PHY_DX8SL4DXCTL2_WDBI                                                   0x0

		PUB Read FIFO Bypass
		PSU_DDR_PHY_DX8SL4DXCTL2_PRFBYP                                                 0x0

		DATX8 Receive FIFO Read Mode
		PSU_DDR_PHY_DX8SL4DXCTL2_RDMODE                                                 0x0

		Disables the Read FIFO Reset
		PSU_DDR_PHY_DX8SL4DXCTL2_DISRST                                                 0x0

		Read DQS Gate I/O Loopback
		PSU_DDR_PHY_DX8SL4DXCTL2_DQSGLB                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4DXCTL2_RESERVED_0                                             0x0

		DATX8 0-1 DX Control Register 2
		(OFFSET, MASK, VALUE)      (0XFD08152C, 0xFFFFFFFFU ,0x00041800U)  
		RegMask = (DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_MASK | DDR_PHY_DX8SL4DXCTL2_CRDEN_MASK | DDR_PHY_DX8SL4DXCTL2_POSOEX_MASK | DDR_PHY_DX8SL4DXCTL2_PREOEX_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_17_MASK | DDR_PHY_DX8SL4DXCTL2_IOAG_MASK | DDR_PHY_DX8SL4DXCTL2_IOLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_MASK | DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_MASK | DDR_PHY_DX8SL4DXCTL2_RDBI_MASK | DDR_PHY_DX8SL4DXCTL2_WDBI_MASK | DDR_PHY_DX8SL4DXCTL2_PRFBYP_MASK | DDR_PHY_DX8SL4DXCTL2_RDMODE_MASK | DDR_PHY_DX8SL4DXCTL2_DISRST_MASK | DDR_PHY_DX8SL4DXCTL2_DQSGLB_MASK | DDR_PHY_DX8SL4DXCTL2_RESERVED_0_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_31_24_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_CRDEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_POSOEX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SL4DXCTL2_PREOEX_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_17_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOAG_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_IOLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_14_13_SHIFT
			| 0x0000000CU << DDR_PHY_DX8SL4DXCTL2_LPWAKEUP_THRSH_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_WDBI_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_PRFBYP_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RDMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_DISRST_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_DQSGLB_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4DXCTL2_RESERVED_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL4DXCTL2_OFFSET ,0xFFFFFFFFU ,0x00041800U);
	/*############################################################################################################################ */

		/*Register : DX8SL4IOCR @ 0XFD081530</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SL4IOCR_RESERVED_31                                              0x0

		PVREF_DAC REFSEL range select
		PSU_DDR_PHY_DX8SL4IOCR_DXDACRANGE                                               0x7

		IOM bits for PVREF, PVREF_DAC and PVREFE cells in DX IO ring
		PSU_DDR_PHY_DX8SL4IOCR_DXVREFIOM                                                0x0

		DX IO Mode
		PSU_DDR_PHY_DX8SL4IOCR_DXIOM                                                    0x2

		DX IO Transmitter Mode
		PSU_DDR_PHY_DX8SL4IOCR_DXTXM                                                    0x0

		DX IO Receiver Mode
		PSU_DDR_PHY_DX8SL4IOCR_DXRXM                                                    0x0

		DATX8 0-1 I/O Configuration Register
		(OFFSET, MASK, VALUE)      (0XFD081530, 0xFFFFFFFFU ,0x70800000U)  
		RegMask = (DDR_PHY_DX8SL4IOCR_RESERVED_31_MASK | DDR_PHY_DX8SL4IOCR_DXDACRANGE_MASK | DDR_PHY_DX8SL4IOCR_DXVREFIOM_MASK | DDR_PHY_DX8SL4IOCR_DXIOM_MASK | DDR_PHY_DX8SL4IOCR_DXTXM_MASK | DDR_PHY_DX8SL4IOCR_DXRXM_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SL4IOCR_RESERVED_31_SHIFT
			| 0x00000007U << DDR_PHY_DX8SL4IOCR_DXDACRANGE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXVREFIOM_SHIFT
			| 0x00000002U << DDR_PHY_DX8SL4IOCR_DXIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXTXM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SL4IOCR_DXRXM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SL4IOCR_OFFSET ,0xFFFFFFFFU ,0x70800000U);
	/*############################################################################################################################ */

		/*Register : DX8SLbDQSCTL @ 0XFD0817DC</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25                                         0x0

		Read Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SLBDQSCTL_RRRMODE                                                0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22                                         0x0

		Write Path Rise-to-Rise Mode
		PSU_DDR_PHY_DX8SLBDQSCTL_WRRMODE                                                0x1

		DQS Gate Extension
		PSU_DDR_PHY_DX8SLBDQSCTL_DQSGX                                                  0x0

		Low Power PLL Power Down
		PSU_DDR_PHY_DX8SLBDQSCTL_LPPLLPD                                                0x1

		Low Power I/O Power Down
		PSU_DDR_PHY_DX8SLBDQSCTL_LPIOPD                                                 0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15                                         0x0

		QS Counter Enable
		PSU_DDR_PHY_DX8SLBDQSCTL_QSCNTEN                                                0x1

		Unused DQ I/O Mode
		PSU_DDR_PHY_DX8SLBDQSCTL_UDQIOM                                                 0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10                                         0x0

		Data Slew Rate
		PSU_DDR_PHY_DX8SLBDQSCTL_DXSR                                                   0x3

		DQS# Resistor
		PSU_DDR_PHY_DX8SLBDQSCTL_DQSNRES                                                0xc

		DQS Resistor
		PSU_DDR_PHY_DX8SLBDQSCTL_DQSRES                                                 0x4

		DATX8 0-8 DQS Control Register
		(OFFSET, MASK, VALUE)      (0XFD0817DC, 0xFFFFFFFFU ,0x012643C4U)  
		RegMask = (DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_MASK | DDR_PHY_DX8SLBDQSCTL_RRRMODE_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_MASK | DDR_PHY_DX8SLBDQSCTL_WRRMODE_MASK | DDR_PHY_DX8SLBDQSCTL_DQSGX_MASK | DDR_PHY_DX8SLBDQSCTL_LPPLLPD_MASK | DDR_PHY_DX8SLBDQSCTL_LPIOPD_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_MASK | DDR_PHY_DX8SLBDQSCTL_QSCNTEN_MASK | DDR_PHY_DX8SLBDQSCTL_UDQIOM_MASK | DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_MASK | DDR_PHY_DX8SLBDQSCTL_DXSR_MASK | DDR_PHY_DX8SLBDQSCTL_DQSNRES_MASK | DDR_PHY_DX8SLBDQSCTL_DQSRES_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_31_25_SHIFT
			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_RRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_23_22_SHIFT
			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_WRRMODE_SHIFT
			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_DQSGX_SHIFT
			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_LPPLLPD_SHIFT
			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_LPIOPD_SHIFT
			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_16_15_SHIFT
			| 0x00000001U << DDR_PHY_DX8SLBDQSCTL_QSCNTEN_SHIFT
			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_UDQIOM_SHIFT
			| 0x00000000U << DDR_PHY_DX8SLBDQSCTL_RESERVED_12_10_SHIFT
			| 0x00000003U << DDR_PHY_DX8SLBDQSCTL_DXSR_SHIFT
			| 0x0000000CU << DDR_PHY_DX8SLBDQSCTL_DQSNRES_SHIFT
			| 0x00000004U << DDR_PHY_DX8SLBDQSCTL_DQSRES_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_DX8SLBDQSCTL_OFFSET ,0xFFFFFFFFU ,0x012643C4U);
	/*############################################################################################################################ */

		/*Register : PIR @ 0XFD080004</p>

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_PIR_RESERVED_31                                                     0x0

		Impedance Calibration Bypass
		PSU_DDR_PHY_PIR_ZCALBYP                                                         0x0

		Digital Delay Line (DDL) Calibration Pause
		PSU_DDR_PHY_PIR_DCALPSE                                                         0x0

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_PIR_RESERVED_28_21                                                  0x0

		Write DQS2DQ Training
		PSU_DDR_PHY_PIR_DQS2DQ                                                          0x0

		RDIMM Initialization
		PSU_DDR_PHY_PIR_RDIMMINIT                                                       0x0

		Controller DRAM Initialization
		PSU_DDR_PHY_PIR_CTLDINIT                                                        0x1

		VREF Training
		PSU_DDR_PHY_PIR_VREF                                                            0x0

		Static Read Training
		PSU_DDR_PHY_PIR_SRD                                                             0x0

		Write Data Eye Training
		PSU_DDR_PHY_PIR_WREYE                                                           0x0

		Read Data Eye Training
		PSU_DDR_PHY_PIR_RDEYE                                                           0x0

		Write Data Bit Deskew
		PSU_DDR_PHY_PIR_WRDSKW                                                          0x0

		Read Data Bit Deskew
		PSU_DDR_PHY_PIR_RDDSKW                                                          0x0

		Write Leveling Adjust
		PSU_DDR_PHY_PIR_WLADJ                                                           0x0

		Read DQS Gate Training
		PSU_DDR_PHY_PIR_QSGATE                                                          0x0

		Write Leveling
		PSU_DDR_PHY_PIR_WL                                                              0x0

		DRAM Initialization
		PSU_DDR_PHY_PIR_DRAMINIT                                                        0x0

		DRAM Reset (DDR3/DDR4/LPDDR4 Only)
		PSU_DDR_PHY_PIR_DRAMRST                                                         0x0

		PHY Reset
		PSU_DDR_PHY_PIR_PHYRST                                                          0x1

		Digital Delay Line (DDL) Calibration
		PSU_DDR_PHY_PIR_DCAL                                                            0x1

		PLL Initialiazation
		PSU_DDR_PHY_PIR_PLLINIT                                                         0x1

		Reserved. Return zeroes on reads.
		PSU_DDR_PHY_PIR_RESERVED_3                                                      0x0

		CA Training
		PSU_DDR_PHY_PIR_CA                                                              0x0

		Impedance Calibration
		PSU_DDR_PHY_PIR_ZCAL                                                            0x1

		Initialization Trigger
		PSU_DDR_PHY_PIR_INIT                                                            0x1

		PHY Initialization Register
		(OFFSET, MASK, VALUE)      (0XFD080004, 0xFFFFFFFFU ,0x00040073U)  
		RegMask = (DDR_PHY_PIR_RESERVED_31_MASK | DDR_PHY_PIR_ZCALBYP_MASK | DDR_PHY_PIR_DCALPSE_MASK | DDR_PHY_PIR_RESERVED_28_21_MASK | DDR_PHY_PIR_DQS2DQ_MASK | DDR_PHY_PIR_RDIMMINIT_MASK | DDR_PHY_PIR_CTLDINIT_MASK | DDR_PHY_PIR_VREF_MASK | DDR_PHY_PIR_SRD_MASK | DDR_PHY_PIR_WREYE_MASK | DDR_PHY_PIR_RDEYE_MASK | DDR_PHY_PIR_WRDSKW_MASK | DDR_PHY_PIR_RDDSKW_MASK | DDR_PHY_PIR_WLADJ_MASK | DDR_PHY_PIR_QSGATE_MASK | DDR_PHY_PIR_WL_MASK | DDR_PHY_PIR_DRAMINIT_MASK | DDR_PHY_PIR_DRAMRST_MASK | DDR_PHY_PIR_PHYRST_MASK | DDR_PHY_PIR_DCAL_MASK | DDR_PHY_PIR_PLLINIT_MASK | DDR_PHY_PIR_RESERVED_3_MASK | DDR_PHY_PIR_CA_MASK | DDR_PHY_PIR_ZCAL_MASK | DDR_PHY_PIR_INIT_MASK |  0 );

		RegVal = ((0x00000000U << DDR_PHY_PIR_RESERVED_31_SHIFT
			| 0x00000000U << DDR_PHY_PIR_ZCALBYP_SHIFT
			| 0x00000000U << DDR_PHY_PIR_DCALPSE_SHIFT
			| 0x00000000U << DDR_PHY_PIR_RESERVED_28_21_SHIFT
			| 0x00000000U << DDR_PHY_PIR_DQS2DQ_SHIFT
			| 0x00000000U << DDR_PHY_PIR_RDIMMINIT_SHIFT
			| 0x00000001U << DDR_PHY_PIR_CTLDINIT_SHIFT
			| 0x00000000U << DDR_PHY_PIR_VREF_SHIFT
			| 0x00000000U << DDR_PHY_PIR_SRD_SHIFT
			| 0x00000000U << DDR_PHY_PIR_WREYE_SHIFT
			| 0x00000000U << DDR_PHY_PIR_RDEYE_SHIFT
			| 0x00000000U << DDR_PHY_PIR_WRDSKW_SHIFT
			| 0x00000000U << DDR_PHY_PIR_RDDSKW_SHIFT
			| 0x00000000U << DDR_PHY_PIR_WLADJ_SHIFT
			| 0x00000000U << DDR_PHY_PIR_QSGATE_SHIFT
			| 0x00000000U << DDR_PHY_PIR_WL_SHIFT
			| 0x00000000U << DDR_PHY_PIR_DRAMINIT_SHIFT
			| 0x00000000U << DDR_PHY_PIR_DRAMRST_SHIFT
			| 0x00000001U << DDR_PHY_PIR_PHYRST_SHIFT
			| 0x00000001U << DDR_PHY_PIR_DCAL_SHIFT
			| 0x00000001U << DDR_PHY_PIR_PLLINIT_SHIFT
			| 0x00000000U << DDR_PHY_PIR_RESERVED_3_SHIFT
			| 0x00000000U << DDR_PHY_PIR_CA_SHIFT
			| 0x00000001U << DDR_PHY_PIR_ZCAL_SHIFT
			| 0x00000001U << DDR_PHY_PIR_INIT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DDR_PHY_PIR_OFFSET ,0xFFFFFFFFU ,0x00040073U);
	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_mio_init_data() {
		// : MIO PROGRAMMING
		/*Register : MIO_PIN_0 @ 0XFF180000</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out- (QSPI Clock)
		PSU_IOU_SLCR_MIO_PIN_0_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_0_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[0]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[0]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_0_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[0]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[0]- (GPIO bank 0) 1= can
		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
		) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
		lk- (Trace Port Clock)
		PSU_IOU_SLCR_MIO_PIN_0_L3_SEL                                                   0

		Configures MIO Pin 0 peripheral interface mapping. S
		(OFFSET, MASK, VALUE)      (0XFF180000, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_0_L0_SEL_MASK | IOU_SLCR_MIO_PIN_0_L1_SEL_MASK | IOU_SLCR_MIO_PIN_0_L2_SEL_MASK | IOU_SLCR_MIO_PIN_0_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_0_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_0_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_0_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_1 @ 0XFF180004</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_mi1- (QSPI Databus) 1= qspi, Output, qspi_so_mo1- (QSPI Data
		us)
		PSU_IOU_SLCR_MIO_PIN_1_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_1_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[1]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[1]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_1_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[1]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[1]- (GPIO bank 0) 1= can
		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_o
		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
		Signal)
		PSU_IOU_SLCR_MIO_PIN_1_L3_SEL                                                   0

		Configures MIO Pin 1 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180004, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_1_L0_SEL_MASK | IOU_SLCR_MIO_PIN_1_L1_SEL_MASK | IOU_SLCR_MIO_PIN_1_L2_SEL_MASK | IOU_SLCR_MIO_PIN_1_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_1_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_1_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_1_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_2 @ 0XFF180008</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi2- (QSPI Databus) 1= qspi, Output, qspi_mo2- (QSPI Databus)
		PSU_IOU_SLCR_MIO_PIN_2_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_2_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[2]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[2]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_2_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[2]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[2]- (GPIO bank 0) 1= can
		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc2, Input, ttc2_clk_in
		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_2_L3_SEL                                                   0

		Configures MIO Pin 2 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180008, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_2_L0_SEL_MASK | IOU_SLCR_MIO_PIN_2_L1_SEL_MASK | IOU_SLCR_MIO_PIN_2_L2_SEL_MASK | IOU_SLCR_MIO_PIN_2_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_2_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_2_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_2_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_3 @ 0XFF18000C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi3- (QSPI Databus) 1= qspi, Output, qspi_mo3- (QSPI Databus)
		PSU_IOU_SLCR_MIO_PIN_3_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_3_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[3]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[3]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_3_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[3]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[3]- (GPIO bank 0) 1= can
		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
		- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_3_L3_SEL                                                   0

		Configures MIO Pin 3 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18000C, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_3_L0_SEL_MASK | IOU_SLCR_MIO_PIN_3_L1_SEL_MASK | IOU_SLCR_MIO_PIN_3_L2_SEL_MASK | IOU_SLCR_MIO_PIN_3_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_3_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_3_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_3_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_4 @ 0XFF180010</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_mo_mo0- (QSPI Databus) 1= qspi, Input, qspi_si_mi0- (QSPI Data
		us)
		PSU_IOU_SLCR_MIO_PIN_4_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_4_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[4]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[4]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_4_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[4]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[4]- (GPIO bank 0) 1= can
		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
		- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
		utput, tracedq[2]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_4_L3_SEL                                                   0

		Configures MIO Pin 4 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180010, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_4_L0_SEL_MASK | IOU_SLCR_MIO_PIN_4_L1_SEL_MASK | IOU_SLCR_MIO_PIN_4_L2_SEL_MASK | IOU_SLCR_MIO_PIN_4_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_4_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_4_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_4_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_5 @ 0XFF180014</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out- (QSPI Slave Select)
		PSU_IOU_SLCR_MIO_PIN_5_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_5_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[5]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[5]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_5_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[5]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[5]- (GPIO bank 0) 1= can
		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
		si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
		 trace, Output, tracedq[3]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_5_L3_SEL                                                   0

		Configures MIO Pin 5 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180014, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_5_L0_SEL_MASK | IOU_SLCR_MIO_PIN_5_L1_SEL_MASK | IOU_SLCR_MIO_PIN_5_L2_SEL_MASK | IOU_SLCR_MIO_PIN_5_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_5_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_5_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_5_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_6 @ 0XFF180018</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_clk_for_lpbk- (QSPI Clock to be fed-back)
		PSU_IOU_SLCR_MIO_PIN_6_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_6_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[6]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[6]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_6_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[6]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[6]- (GPIO bank 0) 1= can
		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1
		sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace,
		Output, tracedq[4]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_6_L3_SEL                                                   0

		Configures MIO Pin 6 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180018, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_6_L0_SEL_MASK | IOU_SLCR_MIO_PIN_6_L1_SEL_MASK | IOU_SLCR_MIO_PIN_6_L2_SEL_MASK | IOU_SLCR_MIO_PIN_6_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_6_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_6_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_6_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_7 @ 0XFF18001C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_n_ss_out_upper- (QSPI Slave Select upper)
		PSU_IOU_SLCR_MIO_PIN_7_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_7_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[7]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[7]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_7_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[7]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[7]- (GPIO bank 0) 1= can
		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= 
		tc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, 
		racedq[5]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_7_L3_SEL                                                   0

		Configures MIO Pin 7 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18001C, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_7_L0_SEL_MASK | IOU_SLCR_MIO_PIN_7_L1_SEL_MASK | IOU_SLCR_MIO_PIN_7_L2_SEL_MASK | IOU_SLCR_MIO_PIN_7_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_7_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_7_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_7_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_8 @ 0XFF180020</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[0]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
		[0]- (QSPI Upper Databus)
		PSU_IOU_SLCR_MIO_PIN_8_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_8_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[8]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[8]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_8_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[8]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[8]- (GPIO bank 0) 1= can
		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc
		, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Tr
		ce Port Databus)
		PSU_IOU_SLCR_MIO_PIN_8_L3_SEL                                                   0

		Configures MIO Pin 8 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180020, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_8_L0_SEL_MASK | IOU_SLCR_MIO_PIN_8_L1_SEL_MASK | IOU_SLCR_MIO_PIN_8_L2_SEL_MASK | IOU_SLCR_MIO_PIN_8_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_8_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_8_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_8_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_9 @ 0XFF180024</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[1]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
		[1]- (QSPI Upper Databus)
		PSU_IOU_SLCR_MIO_PIN_9_L0_SEL                                                   1

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)
		PSU_IOU_SLCR_MIO_PIN_9_L1_SEL                                                   0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[9]- (Test Scan Port) = test_scan, Outp
		t, test_scan_out[9]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_9_L2_SEL                                                   0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[9]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[9]- (GPIO bank 0) 1= can
		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, 
		utput, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (U
		RT receiver serial input) 7= trace, Output, tracedq[7]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_9_L3_SEL                                                   0

		Configures MIO Pin 9 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180024, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_9_L0_SEL_MASK | IOU_SLCR_MIO_PIN_9_L1_SEL_MASK | IOU_SLCR_MIO_PIN_9_L2_SEL_MASK | IOU_SLCR_MIO_PIN_9_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_9_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_9_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_9_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_10 @ 0XFF180028</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[2]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
		[2]- (QSPI Upper Databus)
		PSU_IOU_SLCR_MIO_PIN_10_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)
		PSU_IOU_SLCR_MIO_PIN_10_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[10]- (Test Scan Port) = test_scan, Out
		ut, test_scan_out[10]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_10_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[10]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[10]- (GPIO bank 0) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
		t, tracedq[8]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_10_L3_SEL                                                  0

		Configures MIO Pin 10 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180028, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_10_L0_SEL_MASK | IOU_SLCR_MIO_PIN_10_L1_SEL_MASK | IOU_SLCR_MIO_PIN_10_L2_SEL_MASK | IOU_SLCR_MIO_PIN_10_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_10_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_10_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_10_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_11 @ 0XFF18002C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Input, qspi_mi_upper[3]- (QSPI Upper Databus) 1= qspi, Output, qspi_mo_uppe
		[3]- (QSPI Upper Databus)
		PSU_IOU_SLCR_MIO_PIN_11_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)
		PSU_IOU_SLCR_MIO_PIN_11_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[11]- (Test Scan Port) = test_scan, Out
		ut, test_scan_out[11]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_11_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[11]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[11]- (GPIO bank 0) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
		i1_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_11_L3_SEL                                                  0

		Configures MIO Pin 11 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18002C, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_11_L0_SEL_MASK | IOU_SLCR_MIO_PIN_11_L1_SEL_MASK | IOU_SLCR_MIO_PIN_11_L2_SEL_MASK | IOU_SLCR_MIO_PIN_11_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_11_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_11_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_11_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_12 @ 0XFF180030</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= qspi, Output, qspi_sclk_out_upper- (QSPI Upper Clock)
		PSU_IOU_SLCR_MIO_PIN_12_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
		
		PSU_IOU_SLCR_MIO_PIN_12_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= test_scan, Input, test_scan_in[12]- (Test Scan Port) = test_scan, Out
		ut, test_scan_out[12]- (Test Scan Port) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_12_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[12]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[12]- (GPIO bank 0) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cl
		ck) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trac
		dq[10]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_12_L3_SEL                                                  0

		Configures MIO Pin 12 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180030, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_12_L0_SEL_MASK | IOU_SLCR_MIO_PIN_12_L1_SEL_MASK | IOU_SLCR_MIO_PIN_12_L2_SEL_MASK | IOU_SLCR_MIO_PIN_12_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_12_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_12_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_12_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_13 @ 0XFF180034</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_13_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[0]- (NAND chip enable)
		PSU_IOU_SLCR_MIO_PIN_13_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
		bit Data bus) 2= test_scan, Input, test_scan_in[13]- (Test Scan Port) = test_scan, Output, test_scan_out[13]- (Test Scan Port
		 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_13_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[13]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[13]- (GPIO bank 0) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave
		out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, tracedq[11]- (Trace Port Dat
		bus)
		PSU_IOU_SLCR_MIO_PIN_13_L3_SEL                                                  0

		Configures MIO Pin 13 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180034, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_13_L0_SEL_MASK | IOU_SLCR_MIO_PIN_13_L1_SEL_MASK | IOU_SLCR_MIO_PIN_13_L2_SEL_MASK | IOU_SLCR_MIO_PIN_13_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_13_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_13_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_13_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_14 @ 0XFF180038</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_14_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_cle- (NAND Command Latch Enable)
		PSU_IOU_SLCR_MIO_PIN_14_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
		bit Data bus) 2= test_scan, Input, test_scan_in[14]- (Test Scan Port) = test_scan, Output, test_scan_out[14]- (Test Scan Port
		 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_14_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[14]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[14]- (GPIO bank 0) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_
		n- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_14_L3_SEL                                                  2

		Configures MIO Pin 14 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180038, 0x000000FEU ,0x00000040U)  
		RegMask = (IOU_SLCR_MIO_PIN_14_L0_SEL_MASK | IOU_SLCR_MIO_PIN_14_L1_SEL_MASK | IOU_SLCR_MIO_PIN_14_L2_SEL_MASK | IOU_SLCR_MIO_PIN_14_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_14_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_14_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_14_L2_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_14_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_14_OFFSET ,0x000000FEU ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_15 @ 0XFF18003C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_15_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ale- (NAND Address Latch Enable)
		PSU_IOU_SLCR_MIO_PIN_15_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
		bit Data bus) 2= test_scan, Input, test_scan_in[15]- (Test Scan Port) = test_scan, Output, test_scan_out[15]- (Test Scan Port
		 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_15_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[15]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[15]- (GPIO bank 0) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out
		0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter seri
		l output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_15_L3_SEL                                                  2

		Configures MIO Pin 15 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18003C, 0x000000FEU ,0x00000040U)  
		RegMask = (IOU_SLCR_MIO_PIN_15_L0_SEL_MASK | IOU_SLCR_MIO_PIN_15_L1_SEL_MASK | IOU_SLCR_MIO_PIN_15_L2_SEL_MASK | IOU_SLCR_MIO_PIN_15_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_15_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_15_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_15_L2_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_15_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_15_OFFSET ,0x000000FEU ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_16 @ 0XFF180040</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_16_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[0]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[0]- (NAND 
		ata Bus)
		PSU_IOU_SLCR_MIO_PIN_16_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
		bit Data bus) 2= test_scan, Input, test_scan_in[16]- (Test Scan Port) = test_scan, Output, test_scan_out[16]- (Test Scan Port
		 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_16_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[16]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[16]- (GPIO bank 0) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
		 Output, tracedq[14]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_16_L3_SEL                                                  2

		Configures MIO Pin 16 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180040, 0x000000FEU ,0x00000040U)  
		RegMask = (IOU_SLCR_MIO_PIN_16_L0_SEL_MASK | IOU_SLCR_MIO_PIN_16_L1_SEL_MASK | IOU_SLCR_MIO_PIN_16_L2_SEL_MASK | IOU_SLCR_MIO_PIN_16_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_16_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_16_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_16_L2_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_16_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_16_OFFSET ,0x000000FEU ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_17 @ 0XFF180044</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_17_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[1]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[1]- (NAND 
		ata Bus)
		PSU_IOU_SLCR_MIO_PIN_17_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
		bit Data bus) 2= test_scan, Input, test_scan_in[17]- (Test Scan Port) = test_scan, Output, test_scan_out[17]- (Test Scan Port
		 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_17_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[17]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[17]- (GPIO bank 0) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
		0_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
		7= trace, Output, tracedq[15]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_17_L3_SEL                                                  2

		Configures MIO Pin 17 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180044, 0x000000FEU ,0x00000040U)  
		RegMask = (IOU_SLCR_MIO_PIN_17_L0_SEL_MASK | IOU_SLCR_MIO_PIN_17_L1_SEL_MASK | IOU_SLCR_MIO_PIN_17_L2_SEL_MASK | IOU_SLCR_MIO_PIN_17_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_17_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_17_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_17_L2_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_17_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_17_OFFSET ,0x000000FEU ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_18 @ 0XFF180048</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_18_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[2]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[2]- (NAND 
		ata Bus)
		PSU_IOU_SLCR_MIO_PIN_18_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
		bit Data bus) 2= test_scan, Input, test_scan_in[18]- (Test Scan Port) = test_scan, Output, test_scan_out[18]- (Test Scan Port
		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_18_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[18]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[18]- (GPIO bank 0) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_18_L3_SEL                                                  6

		Configures MIO Pin 18 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180048, 0x000000FEU ,0x000000C0U)  
		RegMask = (IOU_SLCR_MIO_PIN_18_L0_SEL_MASK | IOU_SLCR_MIO_PIN_18_L1_SEL_MASK | IOU_SLCR_MIO_PIN_18_L2_SEL_MASK | IOU_SLCR_MIO_PIN_18_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_18_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_18_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_18_L2_SEL_SHIFT
			| 0x00000006U << IOU_SLCR_MIO_PIN_18_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_18_OFFSET ,0x000000FEU ,0x000000C0U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_19 @ 0XFF18004C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_19_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[3]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[3]- (NAND 
		ata Bus)
		PSU_IOU_SLCR_MIO_PIN_19_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
		bit Data bus) 2= test_scan, Input, test_scan_in[19]- (Test Scan Port) = test_scan, Output, test_scan_out[19]- (Test Scan Port
		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_19_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[19]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[19]- (GPIO bank 0) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
		 ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_19_L3_SEL                                                  6

		Configures MIO Pin 19 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18004C, 0x000000FEU ,0x000000C0U)  
		RegMask = (IOU_SLCR_MIO_PIN_19_L0_SEL_MASK | IOU_SLCR_MIO_PIN_19_L1_SEL_MASK | IOU_SLCR_MIO_PIN_19_L2_SEL_MASK | IOU_SLCR_MIO_PIN_19_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_19_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_19_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_19_L2_SEL_SHIFT
			| 0x00000006U << IOU_SLCR_MIO_PIN_19_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_19_OFFSET ,0x000000FEU ,0x000000C0U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_20 @ 0XFF180050</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_20_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[4]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[4]- (NAND 
		ata Bus)
		PSU_IOU_SLCR_MIO_PIN_20_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
		bit Data bus) 2= test_scan, Input, test_scan_in[20]- (Test Scan Port) = test_scan, Output, test_scan_out[20]- (Test Scan Port
		 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_20_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[20]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[20]- (GPIO bank 0) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= t
		c1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_20_L3_SEL                                                  6

		Configures MIO Pin 20 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180050, 0x000000FEU ,0x000000C0U)  
		RegMask = (IOU_SLCR_MIO_PIN_20_L0_SEL_MASK | IOU_SLCR_MIO_PIN_20_L1_SEL_MASK | IOU_SLCR_MIO_PIN_20_L2_SEL_MASK | IOU_SLCR_MIO_PIN_20_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_20_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_20_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_20_L2_SEL_SHIFT
			| 0x00000006U << IOU_SLCR_MIO_PIN_20_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_20_OFFSET ,0x000000FEU ,0x000000C0U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_21 @ 0XFF180054</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_21_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[5]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[5]- (NAND 
		ata Bus)
		PSU_IOU_SLCR_MIO_PIN_21_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
		 Indicator) 2= test_scan, Input, test_scan_in[21]- (Test Scan Port) = test_scan, Output, test_scan_out[21]- (Test Scan Port) 
		= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_21_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[21]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[21]- (GPIO bank 0) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- 
		UART receiver serial input) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_21_L3_SEL                                                  6

		Configures MIO Pin 21 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180054, 0x000000FEU ,0x000000C0U)  
		RegMask = (IOU_SLCR_MIO_PIN_21_L0_SEL_MASK | IOU_SLCR_MIO_PIN_21_L1_SEL_MASK | IOU_SLCR_MIO_PIN_21_L2_SEL_MASK | IOU_SLCR_MIO_PIN_21_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_21_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_21_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_21_L2_SEL_SHIFT
			| 0x00000006U << IOU_SLCR_MIO_PIN_21_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_21_OFFSET ,0x000000FEU ,0x000000C0U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_22 @ 0XFF180058</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_22_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_we_b- (NAND Write Enable)
		PSU_IOU_SLCR_MIO_PIN_22_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= test_scan, Input, test_scan_in[22]-
		(Test Scan Port) = test_scan, Output, test_scan_out[22]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_22_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[22]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[22]- (GPIO bank 0) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
		sed
		PSU_IOU_SLCR_MIO_PIN_22_L3_SEL                                                  0

		Configures MIO Pin 22 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180058, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_22_L0_SEL_MASK | IOU_SLCR_MIO_PIN_22_L1_SEL_MASK | IOU_SLCR_MIO_PIN_22_L2_SEL_MASK | IOU_SLCR_MIO_PIN_22_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_22_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_22_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_22_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_23 @ 0XFF18005C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_23_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[6]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[6]- (NAND 
		ata Bus)
		PSU_IOU_SLCR_MIO_PIN_23_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= test_scan, Input, test_scan_in
		23]- (Test Scan Port) = test_scan, Output, test_scan_out[23]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper
		
		PSU_IOU_SLCR_MIO_PIN_23_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[23]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[23]- (GPIO bank 0) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
		tput) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_23_L3_SEL                                                  0

		Configures MIO Pin 23 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18005C, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_23_L0_SEL_MASK | IOU_SLCR_MIO_PIN_23_L1_SEL_MASK | IOU_SLCR_MIO_PIN_23_L2_SEL_MASK | IOU_SLCR_MIO_PIN_23_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_23_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_23_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_23_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_24 @ 0XFF180060</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_24_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dq_in[7]- (NAND Data Bus) 1= nand, Output, nfc_dq_out[7]- (NAND 
		ata Bus)
		PSU_IOU_SLCR_MIO_PIN_24_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= test_scan, Input, test
		scan_in[24]- (Test Scan Port) = test_scan, Output, test_scan_out[24]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ex
		 Tamper)
		PSU_IOU_SLCR_MIO_PIN_24_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[24]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[24]- (GPIO bank 0) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= Not Used 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1,
		Output, ua1_txd- (UART transmitter serial output) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_24_L3_SEL                                                  1

		Configures MIO Pin 24 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180060, 0x000000FEU ,0x00000020U)  
		RegMask = (IOU_SLCR_MIO_PIN_24_L0_SEL_MASK | IOU_SLCR_MIO_PIN_24_L1_SEL_MASK | IOU_SLCR_MIO_PIN_24_L2_SEL_MASK | IOU_SLCR_MIO_PIN_24_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_24_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_24_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_24_L2_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_24_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_24_OFFSET ,0x000000FEU ,0x00000020U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_25 @ 0XFF180064</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_25_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_re_n- (NAND Read Enable)
		PSU_IOU_SLCR_MIO_PIN_25_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= test_scan, Input,
		test_scan_in[25]- (Test Scan Port) = test_scan, Output, test_scan_out[25]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (C
		U Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_25_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio0, Input, gpio_0_pin_in[25]- (GPIO bank 0) 0= gpio0, Output, gpio_0_pin_out[25]- (GPIO bank 0) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= Not Used 5= ttc3, Output, ttc3_wave_out- (TTC Waveform 
		lock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_25_L3_SEL                                                  1

		Configures MIO Pin 25 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180064, 0x000000FEU ,0x00000020U)  
		RegMask = (IOU_SLCR_MIO_PIN_25_L0_SEL_MASK | IOU_SLCR_MIO_PIN_25_L1_SEL_MASK | IOU_SLCR_MIO_PIN_25_L2_SEL_MASK | IOU_SLCR_MIO_PIN_25_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_25_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_25_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_25_L2_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_25_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_25_OFFSET ,0x000000FEU ,0x00000020U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_26 @ 0XFF180068</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_clk- (TX RGMII clock)
		PSU_IOU_SLCR_MIO_PIN_26_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Output, nfc_ce[1]- (NAND chip enable)
		PSU_IOU_SLCR_MIO_PIN_26_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[26]- (Test Sc
		n Port) = test_scan, Output, test_scan_out[26]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_26_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[0]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[0]- (GPIO bank 1) 1= can
		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clock
		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
		Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_26_L3_SEL                                                  0

		Configures MIO Pin 26 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180068, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_26_L0_SEL_MASK | IOU_SLCR_MIO_PIN_26_L1_SEL_MASK | IOU_SLCR_MIO_PIN_26_L2_SEL_MASK | IOU_SLCR_MIO_PIN_26_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_26_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_26_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_26_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_26_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_26_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_27 @ 0XFF18006C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[0]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_27_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[0]- (NAND Ready/Busy)
		PSU_IOU_SLCR_MIO_PIN_27_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[27]- (Test Sc
		n Port) = test_scan, Output, test_scan_out[27]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
		t, dp_aux_data_out- (Dp Aux Data)
		PSU_IOU_SLCR_MIO_PIN_27_L2_SEL                                                  3

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[1]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[1]- (GPIO bank 1) 1= can
		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
		atabus)
		PSU_IOU_SLCR_MIO_PIN_27_L3_SEL                                                  0

		Configures MIO Pin 27 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18006C, 0x000000FEU ,0x00000018U)  
		RegMask = (IOU_SLCR_MIO_PIN_27_L0_SEL_MASK | IOU_SLCR_MIO_PIN_27_L1_SEL_MASK | IOU_SLCR_MIO_PIN_27_L2_SEL_MASK | IOU_SLCR_MIO_PIN_27_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_27_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_27_L1_SEL_SHIFT
			| 0x00000003U << IOU_SLCR_MIO_PIN_27_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_27_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_27_OFFSET ,0x000000FEU ,0x00000018U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_28 @ 0XFF180070</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[1]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_28_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_rb_n[1]- (NAND Ready/Busy)
		PSU_IOU_SLCR_MIO_PIN_28_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[28]- (Test Sc
		n Port) = test_scan, Output, test_scan_out[28]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
		PSU_IOU_SLCR_MIO_PIN_28_L2_SEL                                                  3

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[2]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[2]- (GPIO bank 1) 1= can
		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_28_L3_SEL                                                  0

		Configures MIO Pin 28 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180070, 0x000000FEU ,0x00000018U)  
		RegMask = (IOU_SLCR_MIO_PIN_28_L0_SEL_MASK | IOU_SLCR_MIO_PIN_28_L1_SEL_MASK | IOU_SLCR_MIO_PIN_28_L2_SEL_MASK | IOU_SLCR_MIO_PIN_28_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_28_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_28_L1_SEL_SHIFT
			| 0x00000003U << IOU_SLCR_MIO_PIN_28_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_28_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_28_OFFSET ,0x000000FEU ,0x00000018U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_29 @ 0XFF180074</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[2]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_29_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
		PSU_IOU_SLCR_MIO_PIN_29_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[29]- (Test Sc
		n Port) = test_scan, Output, test_scan_out[29]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Outp
		t, dp_aux_data_out- (Dp Aux Data)
		PSU_IOU_SLCR_MIO_PIN_29_L2_SEL                                                  3

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[3]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[3]- (GPIO bank 1) 1= can
		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0]
		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
		) 7= trace, Output, tracedq[7]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_29_L3_SEL                                                  0

		Configures MIO Pin 29 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180074, 0x000000FEU ,0x00000018U)  
		RegMask = (IOU_SLCR_MIO_PIN_29_L0_SEL_MASK | IOU_SLCR_MIO_PIN_29_L1_SEL_MASK | IOU_SLCR_MIO_PIN_29_L2_SEL_MASK | IOU_SLCR_MIO_PIN_29_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_29_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_29_L1_SEL_SHIFT
			| 0x00000003U << IOU_SLCR_MIO_PIN_29_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_29_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_29_OFFSET ,0x000000FEU ,0x00000018U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_30 @ 0XFF180078</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_txd[3]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_30_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
		PSU_IOU_SLCR_MIO_PIN_30_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[30]- (Test Sc
		n Port) = test_scan, Output, test_scan_out[30]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
		PSU_IOU_SLCR_MIO_PIN_30_L2_SEL                                                  3

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[4]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[4]- (GPIO bank 1) 1= can
		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_so
		 (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output
		 tracedq[8]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_30_L3_SEL                                                  0

		Configures MIO Pin 30 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180078, 0x000000FEU ,0x00000018U)  
		RegMask = (IOU_SLCR_MIO_PIN_30_L0_SEL_MASK | IOU_SLCR_MIO_PIN_30_L1_SEL_MASK | IOU_SLCR_MIO_PIN_30_L2_SEL_MASK | IOU_SLCR_MIO_PIN_30_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_30_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_30_L1_SEL_SHIFT
			| 0x00000003U << IOU_SLCR_MIO_PIN_30_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_30_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_30_OFFSET ,0x000000FEU ,0x00000018U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_31 @ 0XFF18007C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Output, gem0_rgmii_tx_ctl- (TX RGMII control)
		PSU_IOU_SLCR_MIO_PIN_31_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
		PSU_IOU_SLCR_MIO_PIN_31_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Input, pmu_gpi[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[31]- (Test Sc
		n Port) = test_scan, Output, test_scan_out[31]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_31_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[5]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[5]- (GPIO bank 1) 1= can
		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi
		_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial out
		ut) 7= trace, Output, tracedq[9]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_31_L3_SEL                                                  0

		Configures MIO Pin 31 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18007C, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_31_L0_SEL_MASK | IOU_SLCR_MIO_PIN_31_L1_SEL_MASK | IOU_SLCR_MIO_PIN_31_L2_SEL_MASK | IOU_SLCR_MIO_PIN_31_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_31_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_31_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_31_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_32 @ 0XFF180080</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_clk- (RX RGMII clock)
		PSU_IOU_SLCR_MIO_PIN_32_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= nand, Input, nfc_dqs_in- (NAND Strobe) 1= nand, Output, nfc_dqs_out- (NAND Strobe
		
		PSU_IOU_SLCR_MIO_PIN_32_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[0]- (PMU GPI) 2= test_scan, Input, test_scan_in[32]- (Test S
		an Port) = test_scan, Output, test_scan_out[32]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_32_L2_SEL                                                  1

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[6]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[6]- (GPIO bank 1) 1= can
		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi
		_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= 
		race, Output, tracedq[10]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_32_L3_SEL                                                  0

		Configures MIO Pin 32 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180080, 0x000000FEU ,0x00000008U)  
		RegMask = (IOU_SLCR_MIO_PIN_32_L0_SEL_MASK | IOU_SLCR_MIO_PIN_32_L1_SEL_MASK | IOU_SLCR_MIO_PIN_32_L2_SEL_MASK | IOU_SLCR_MIO_PIN_32_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_32_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_32_L1_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_32_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_32_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_32_OFFSET ,0x000000FEU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_33 @ 0XFF180084</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[0]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_33_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
		PSU_IOU_SLCR_MIO_PIN_33_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[1]- (PMU GPI) 2= test_scan, Input, test_scan_in[33]- (Test S
		an Port) = test_scan, Output, test_scan_out[33]- (Test Scan Port) 3= csu, Input, csu_ext_tamper- (CSU Ext Tamper)
		PSU_IOU_SLCR_MIO_PIN_33_L2_SEL                                                  1

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[7]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[7]- (GPIO bank 1) 1= can
		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= t
		c3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, traced
		[11]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_33_L3_SEL                                                  0

		Configures MIO Pin 33 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180084, 0x000000FEU ,0x00000008U)  
		RegMask = (IOU_SLCR_MIO_PIN_33_L0_SEL_MASK | IOU_SLCR_MIO_PIN_33_L1_SEL_MASK | IOU_SLCR_MIO_PIN_33_L2_SEL_MASK | IOU_SLCR_MIO_PIN_33_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_33_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_33_L1_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_33_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_33_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_33_OFFSET ,0x000000FEU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_34 @ 0XFF180088</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[1]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_34_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
		PSU_IOU_SLCR_MIO_PIN_34_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[2]- (PMU GPI) 2= test_scan, Input, test_scan_in[34]- (Test S
		an Port) = test_scan, Output, test_scan_out[34]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
		ut, dp_aux_data_out- (Dp Aux Data)
		PSU_IOU_SLCR_MIO_PIN_34_L2_SEL                                                  1

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[8]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[8]- (GPIO bank 1) 1= can
		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
		 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc2
		 Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace P
		rt Databus)
		PSU_IOU_SLCR_MIO_PIN_34_L3_SEL                                                  0

		Configures MIO Pin 34 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180088, 0x000000FEU ,0x00000008U)  
		RegMask = (IOU_SLCR_MIO_PIN_34_L0_SEL_MASK | IOU_SLCR_MIO_PIN_34_L1_SEL_MASK | IOU_SLCR_MIO_PIN_34_L2_SEL_MASK | IOU_SLCR_MIO_PIN_34_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_34_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_34_L1_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_34_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_34_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_34_OFFSET ,0x000000FEU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_35 @ 0XFF18008C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[2]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_35_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
		PSU_IOU_SLCR_MIO_PIN_35_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[3]- (PMU GPI) 2= test_scan, Input, test_scan_in[35]- (Test S
		an Port) = test_scan, Output, test_scan_out[35]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
		PSU_IOU_SLCR_MIO_PIN_35_L2_SEL                                                  1

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[9]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[9]- (GPIO bank 1) 1= can
		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
		) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1,
		Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- 
		UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_35_L3_SEL                                                  0

		Configures MIO Pin 35 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18008C, 0x000000FEU ,0x00000008U)  
		RegMask = (IOU_SLCR_MIO_PIN_35_L0_SEL_MASK | IOU_SLCR_MIO_PIN_35_L1_SEL_MASK | IOU_SLCR_MIO_PIN_35_L2_SEL_MASK | IOU_SLCR_MIO_PIN_35_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_35_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_35_L1_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_35_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_35_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_35_OFFSET ,0x000000FEU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_36 @ 0XFF180090</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rxd[3]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_36_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
		PSU_IOU_SLCR_MIO_PIN_36_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[4]- (PMU GPI) 2= test_scan, Input, test_scan_in[36]- (Test S
		an Port) = test_scan, Output, test_scan_out[36]- (Test Scan Port) 3= dpaux, Input, dp_aux_data_in- (Dp Aux Data) = dpaux, Out
		ut, dp_aux_data_out- (Dp Aux Data)
		PSU_IOU_SLCR_MIO_PIN_36_L2_SEL                                                  1

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[10]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[10]- (GPIO bank 1) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
		 Output, tracedq[14]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_36_L3_SEL                                                  0

		Configures MIO Pin 36 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180090, 0x000000FEU ,0x00000008U)  
		RegMask = (IOU_SLCR_MIO_PIN_36_L0_SEL_MASK | IOU_SLCR_MIO_PIN_36_L1_SEL_MASK | IOU_SLCR_MIO_PIN_36_L2_SEL_MASK | IOU_SLCR_MIO_PIN_36_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_36_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_36_L1_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_36_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_36_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_36_OFFSET ,0x000000FEU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_37 @ 0XFF180094</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem0, Input, gem0_rgmii_rx_ctl- (RX RGMII control )
		PSU_IOU_SLCR_MIO_PIN_37_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= pcie, Input, pcie_reset_n- (PCIE Reset signal)
		PSU_IOU_SLCR_MIO_PIN_37_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= pmu, Output, pmu_gpo[5]- (PMU GPI) 2= test_scan, Input, test_scan_in[37]- (Test S
		an Port) = test_scan, Output, test_scan_out[37]- (Test Scan Port) 3= dpaux, Input, dp_hot_plug_detect- (Dp Aux Hot Plug)
		PSU_IOU_SLCR_MIO_PIN_37_L2_SEL                                                  1

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[11]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[11]- (GPIO bank 1) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
		1_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
		7= trace, Output, tracedq[15]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_37_L3_SEL                                                  0

		Configures MIO Pin 37 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180094, 0x000000FEU ,0x00000008U)  
		RegMask = (IOU_SLCR_MIO_PIN_37_L0_SEL_MASK | IOU_SLCR_MIO_PIN_37_L1_SEL_MASK | IOU_SLCR_MIO_PIN_37_L2_SEL_MASK | IOU_SLCR_MIO_PIN_37_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_37_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_37_L1_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_37_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_37_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_37_OFFSET ,0x000000FEU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_38 @ 0XFF180098</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_clk- (TX RGMII clock)
		PSU_IOU_SLCR_MIO_PIN_38_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_38_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_38_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[12]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[12]- (GPIO bank 1) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Clo
		k) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, trace_clk-
		(Trace Port Clock)
		PSU_IOU_SLCR_MIO_PIN_38_L3_SEL                                                  0

		Configures MIO Pin 38 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180098, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_38_L0_SEL_MASK | IOU_SLCR_MIO_PIN_38_L1_SEL_MASK | IOU_SLCR_MIO_PIN_38_L2_SEL_MASK | IOU_SLCR_MIO_PIN_38_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_38_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_38_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_38_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_39 @ 0XFF18009C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[0]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_39_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_39_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= sd1, Input, sd1_data_i
		[4]- (8-bit Data bus) = sd1, Output, sdio1_data_out[4]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_39_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[13]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[13]- (GPIO bank 1) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc0, Output, ttc0_wav
		_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, trace_ctl- (Trace Port
		Control Signal)
		PSU_IOU_SLCR_MIO_PIN_39_L3_SEL                                                  0

		Configures MIO Pin 39 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18009C, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_39_L0_SEL_MASK | IOU_SLCR_MIO_PIN_39_L1_SEL_MASK | IOU_SLCR_MIO_PIN_39_L2_SEL_MASK | IOU_SLCR_MIO_PIN_39_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_39_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_39_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_39_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_40 @ 0XFF1800A0</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[1]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_40_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_40_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
		 Indicator) 2= sd1, Input, sd1_data_in[5]- (8-bit Data bus) = sd1, Output, sdio1_data_out[5]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_40_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[14]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[14]- (GPIO bank 1) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc3, Input, ttc3_clk
		in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[0]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_40_L3_SEL                                                  0

		Configures MIO Pin 40 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800A0, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_40_L0_SEL_MASK | IOU_SLCR_MIO_PIN_40_L1_SEL_MASK | IOU_SLCR_MIO_PIN_40_L2_SEL_MASK | IOU_SLCR_MIO_PIN_40_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_40_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_40_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_40_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_41 @ 0XFF1800A4</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[2]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_41_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_41_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[6]- (8-bit Data bus) = sd1, Output, sdio1_data_out[6]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_41_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[15]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[15]- (GPIO bank 1) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[
		]- (SPI Master Selects) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial in
		ut) 7= trace, Output, tracedq[1]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_41_L3_SEL                                                  0

		Configures MIO Pin 41 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800A4, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_41_L0_SEL_MASK | IOU_SLCR_MIO_PIN_41_L1_SEL_MASK | IOU_SLCR_MIO_PIN_41_L2_SEL_MASK | IOU_SLCR_MIO_PIN_41_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_41_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_41_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_41_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_42 @ 0XFF1800A8</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_txd[3]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_42_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_42_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[7]- (8-bit Data bus) = sd1, Output, sdio1_data_out[7]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_42_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[16]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[16]- (GPIO bank 1) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_
		o- (MISO signal) 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
		t, tracedq[2]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_42_L3_SEL                                                  0

		Configures MIO Pin 42 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800A8, 0x000000FEU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_PIN_42_L0_SEL_MASK | IOU_SLCR_MIO_PIN_42_L1_SEL_MASK | IOU_SLCR_MIO_PIN_42_L2_SEL_MASK | IOU_SLCR_MIO_PIN_42_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_42_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_42_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_42_OFFSET ,0x000000FEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_43 @ 0XFF1800AC</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Output, gem1_rgmii_tx_ctl- (TX RGMII control)
		PSU_IOU_SLCR_MIO_PIN_43_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_43_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_43_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[17]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[17]- (GPIO bank 1) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, s
		i0_si- (MOSI signal) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
		tput) 7= trace, Output, tracedq[3]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_43_L3_SEL                                                  0

		Configures MIO Pin 43 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800AC, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_43_L0_SEL_MASK | IOU_SLCR_MIO_PIN_43_L1_SEL_MASK | IOU_SLCR_MIO_PIN_43_L2_SEL_MASK | IOU_SLCR_MIO_PIN_43_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_43_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_43_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_43_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_43_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_43_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_44 @ 0XFF1800B0</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_clk- (RX RGMII clock)
		PSU_IOU_SLCR_MIO_PIN_44_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_44_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_44_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[18]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[18]- (GPIO bank 1) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, s
		i1_sclk_out- (SPI Clock) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
		 Not Used
		PSU_IOU_SLCR_MIO_PIN_44_L3_SEL                                                  0

		Configures MIO Pin 44 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800B0, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_44_L0_SEL_MASK | IOU_SLCR_MIO_PIN_44_L1_SEL_MASK | IOU_SLCR_MIO_PIN_44_L2_SEL_MASK | IOU_SLCR_MIO_PIN_44_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_44_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_44_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_44_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_44_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_44_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_45 @ 0XFF1800B4</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[0]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_45_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_45_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
		bit Data bus) 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_45_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[19]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[19]- (GPIO bank 1) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5=
		ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_45_L3_SEL                                                  0

		Configures MIO Pin 45 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800B4, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_45_L0_SEL_MASK | IOU_SLCR_MIO_PIN_45_L1_SEL_MASK | IOU_SLCR_MIO_PIN_45_L2_SEL_MASK | IOU_SLCR_MIO_PIN_45_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_45_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_45_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_45_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_45_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_45_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_46 @ 0XFF1800B8</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[1]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_46_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_46_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_46_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[20]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[20]- (GPIO bank 1) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= tt
		0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_46_L3_SEL                                                  0

		Configures MIO Pin 46 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800B8, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_46_L0_SEL_MASK | IOU_SLCR_MIO_PIN_46_L1_SEL_MASK | IOU_SLCR_MIO_PIN_46_L2_SEL_MASK | IOU_SLCR_MIO_PIN_46_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_46_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_46_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_46_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_46_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_46_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_47 @ 0XFF1800BC</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[2]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_47_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_47_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_47_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[21]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[21]- (GPIO bank 1) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi
		, Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
		 (UART transmitter serial output) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_47_L3_SEL                                                  0

		Configures MIO Pin 47 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800BC, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_47_L0_SEL_MASK | IOU_SLCR_MIO_PIN_47_L1_SEL_MASK | IOU_SLCR_MIO_PIN_47_L2_SEL_MASK | IOU_SLCR_MIO_PIN_47_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_47_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_47_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_47_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_47_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_47_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_48 @ 0XFF1800C0</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rxd[3]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_48_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_48_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_48_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[22]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[22]- (GPIO bank 1) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1
		so- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not U
		ed
		PSU_IOU_SLCR_MIO_PIN_48_L3_SEL                                                  0

		Configures MIO Pin 48 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800C0, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_48_L0_SEL_MASK | IOU_SLCR_MIO_PIN_48_L1_SEL_MASK | IOU_SLCR_MIO_PIN_48_L2_SEL_MASK | IOU_SLCR_MIO_PIN_48_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_48_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_48_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_48_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_48_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_48_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_49 @ 0XFF1800C4</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem1, Input, gem1_rgmii_rx_ctl- (RX RGMII control )
		PSU_IOU_SLCR_MIO_PIN_49_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_49_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_data_in[3]- (8
		bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_49_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[23]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[23]- (GPIO bank 1) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, sp
		1_si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
		7= Not Used
		PSU_IOU_SLCR_MIO_PIN_49_L3_SEL                                                  0

		Configures MIO Pin 49 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800C4, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_49_L0_SEL_MASK | IOU_SLCR_MIO_PIN_49_L1_SEL_MASK | IOU_SLCR_MIO_PIN_49_L2_SEL_MASK | IOU_SLCR_MIO_PIN_49_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_49_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_49_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_49_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_49_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_49_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_50 @ 0XFF1800C8</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)
		PSU_IOU_SLCR_MIO_PIN_50_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_50_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Input, sd1_c
		d_in- (Command Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_50_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[24]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[24]- (GPIO bank 1) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= ttc2, Input, ttc2
		clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_50_L3_SEL                                                  0

		Configures MIO Pin 50 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800C8, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_50_L0_SEL_MASK | IOU_SLCR_MIO_PIN_50_L1_SEL_MASK | IOU_SLCR_MIO_PIN_50_L2_SEL_MASK | IOU_SLCR_MIO_PIN_50_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_50_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_50_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_50_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_50_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_50_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_51 @ 0XFF1800CC</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem_tsu, Input, gem_tsu_clk- (TSU clock)
		PSU_IOU_SLCR_MIO_PIN_51_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_51_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Output, sdio1_clk_out- (SDSDIO clock) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_51_L2_SEL                                                  2

		Level 3 Mux Select 0= gpio1, Input, gpio_1_pin_in[25]- (GPIO bank 1) 0= gpio1, Output, gpio_1_pin_out[25]- (GPIO bank 1) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= mdio1, Input, gem1_mdio_in- (MDIO Data) 4= mdio1, Outp
		t, gem1_mdio_out- (MDIO Data) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter
		serial output) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_51_L3_SEL                                                  0

		Configures MIO Pin 51 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800CC, 0x000000FEU ,0x00000010U)  
		RegMask = (IOU_SLCR_MIO_PIN_51_L0_SEL_MASK | IOU_SLCR_MIO_PIN_51_L1_SEL_MASK | IOU_SLCR_MIO_PIN_51_L2_SEL_MASK | IOU_SLCR_MIO_PIN_51_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_51_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_51_L1_SEL_SHIFT
			| 0x00000002U << IOU_SLCR_MIO_PIN_51_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_51_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_51_OFFSET ,0x000000FEU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_52 @ 0XFF1800D0</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_clk- (TX RGMII clock)
		PSU_IOU_SLCR_MIO_PIN_52_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_clk_in- (ULPI Clock)
		PSU_IOU_SLCR_MIO_PIN_52_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_52_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[0]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[0]- (GPIO bank 2) 1= can
		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
		) 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, spi0_sclk_out- (SPI Cloc
		) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, trace_
		lk- (Trace Port Clock)
		PSU_IOU_SLCR_MIO_PIN_52_L3_SEL                                                  0

		Configures MIO Pin 52 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800D0, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_52_L0_SEL_MASK | IOU_SLCR_MIO_PIN_52_L1_SEL_MASK | IOU_SLCR_MIO_PIN_52_L2_SEL_MASK | IOU_SLCR_MIO_PIN_52_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_52_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_52_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_52_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_52_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_52_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_53 @ 0XFF1800D4</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[0]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_53_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_dir- (Data bus direction control)
		PSU_IOU_SLCR_MIO_PIN_53_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_53_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[1]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[1]- (GPIO bank 2) 1= can
		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
		 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5= ttc1, Output, ttc1_wave_o
		t- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trace_ctl- (Trace Port Control
		Signal)
		PSU_IOU_SLCR_MIO_PIN_53_L3_SEL                                                  0

		Configures MIO Pin 53 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800D4, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_53_L0_SEL_MASK | IOU_SLCR_MIO_PIN_53_L1_SEL_MASK | IOU_SLCR_MIO_PIN_53_L2_SEL_MASK | IOU_SLCR_MIO_PIN_53_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_53_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_53_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_53_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_53_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_53_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_54 @ 0XFF1800D8</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[1]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_54_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[2]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
		ata[2]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_54_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_54_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[2]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[2]- (GPIO bank 2) 1= can
		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
		 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= ttc0, Input, ttc0_clk_in
		 (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[0]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_54_L3_SEL                                                  0

		Configures MIO Pin 54 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800D8, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_54_L0_SEL_MASK | IOU_SLCR_MIO_PIN_54_L1_SEL_MASK | IOU_SLCR_MIO_PIN_54_L2_SEL_MASK | IOU_SLCR_MIO_PIN_54_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_54_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_54_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_54_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_54_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_54_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_55 @ 0XFF1800DC</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[2]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_55_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_nxt- (Data flow control signal from the PHY)
		PSU_IOU_SLCR_MIO_PIN_55_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_55_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[3]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[3]- (GPIO bank 2) 1= can
		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
		) 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi0, Output, spi0_n_ss_out[0
		- (SPI Master Selects) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial
		output) 7= trace, Output, tracedq[1]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_55_L3_SEL                                                  0

		Configures MIO Pin 55 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800DC, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_55_L0_SEL_MASK | IOU_SLCR_MIO_PIN_55_L1_SEL_MASK | IOU_SLCR_MIO_PIN_55_L2_SEL_MASK | IOU_SLCR_MIO_PIN_55_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_55_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_55_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_55_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_55_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_55_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_56 @ 0XFF1800E0</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_txd[3]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_56_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[0]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
		ata[0]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_56_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_56_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[4]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[4]- (GPIO bank 2) 1= can
		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
		) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0_s
		- (MISO signal) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, 
		utput, tracedq[2]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_56_L3_SEL                                                  0

		Configures MIO Pin 56 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800E0, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_56_L0_SEL_MASK | IOU_SLCR_MIO_PIN_56_L1_SEL_MASK | IOU_SLCR_MIO_PIN_56_L2_SEL_MASK | IOU_SLCR_MIO_PIN_56_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_56_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_56_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_56_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_56_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_56_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_57 @ 0XFF1800E4</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Output, gem2_rgmii_tx_ctl- (TX RGMII control)
		PSU_IOU_SLCR_MIO_PIN_57_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[1]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
		ata[1]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_57_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_57_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[5]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[5]- (GPIO bank 2) 1= can
		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
		 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, spi0
		si- (MOSI signal) 5= ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7
		 trace, Output, tracedq[3]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_57_L3_SEL                                                  0

		Configures MIO Pin 57 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800E4, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_57_L0_SEL_MASK | IOU_SLCR_MIO_PIN_57_L1_SEL_MASK | IOU_SLCR_MIO_PIN_57_L2_SEL_MASK | IOU_SLCR_MIO_PIN_57_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_57_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_57_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_57_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_57_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_57_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_58 @ 0XFF1800E8</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_clk- (RX RGMII clock)
		PSU_IOU_SLCR_MIO_PIN_58_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Output, usb0_ulpi_stp- (Asserted to end or interrupt transfers)
		PSU_IOU_SLCR_MIO_PIN_58_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_58_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[6]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[6]- (GPIO bank 2) 1= can
		, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL signal
		 3= pjtag, Input, pjtag_tck- (PJTAG TCK) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, spi1_sclk_out- (SPI Clock
		 5= ttc2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[4]- 
		Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_58_L3_SEL                                                  0

		Configures MIO Pin 58 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800E8, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_58_L0_SEL_MASK | IOU_SLCR_MIO_PIN_58_L1_SEL_MASK | IOU_SLCR_MIO_PIN_58_L2_SEL_MASK | IOU_SLCR_MIO_PIN_58_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_58_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_58_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_58_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_58_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_58_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_59 @ 0XFF1800EC</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[0]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_59_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[3]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
		ata[3]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_59_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_59_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[7]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[7]- (GPIO bank 2) 1= can
		, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA signa
		) 3= pjtag, Input, pjtag_tdi- (PJTAG TDI) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_
		ut- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= trace, Output, tracedq[5]- (Trace Port 
		atabus)
		PSU_IOU_SLCR_MIO_PIN_59_L3_SEL                                                  0

		Configures MIO Pin 59 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800EC, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_59_L0_SEL_MASK | IOU_SLCR_MIO_PIN_59_L1_SEL_MASK | IOU_SLCR_MIO_PIN_59_L2_SEL_MASK | IOU_SLCR_MIO_PIN_59_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_59_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_59_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_59_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_59_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_59_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_60 @ 0XFF1800F0</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[1]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_60_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[4]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
		ata[4]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_60_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_60_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[8]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[8]- (GPIO bank 2) 1= can
		, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL signa
		) 3= pjtag, Output, pjtag_tdo- (PJTAG TDO) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= ttc1, Input, ttc1_clk_i
		- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace, Output, tracedq[6]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_60_L3_SEL                                                  0

		Configures MIO Pin 60 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800F0, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_60_L0_SEL_MASK | IOU_SLCR_MIO_PIN_60_L1_SEL_MASK | IOU_SLCR_MIO_PIN_60_L2_SEL_MASK | IOU_SLCR_MIO_PIN_60_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_60_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_60_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_60_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_60_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_60_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_61 @ 0XFF1800F4</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[2]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_61_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[5]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
		ata[5]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_61_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_61_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[9]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[9]- (GPIO bank 2) 1= can
		, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA signal
		 3= pjtag, Input, pjtag_tms- (PJTAG TMS) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1, Output, spi1_n_ss_out[0]
		 (SPI Master Selects) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial inpu
		) 7= trace, Output, tracedq[7]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_61_L3_SEL                                                  0

		Configures MIO Pin 61 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800F4, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_61_L0_SEL_MASK | IOU_SLCR_MIO_PIN_61_L1_SEL_MASK | IOU_SLCR_MIO_PIN_61_L2_SEL_MASK | IOU_SLCR_MIO_PIN_61_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_61_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_61_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_61_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_61_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_61_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_62 @ 0XFF1800F8</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rxd[3]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_62_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[6]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
		ata[6]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_62_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_62_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[10]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[10]- (GPIO bank 2) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
		o- (MISO signal) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Outp
		t, tracedq[8]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_62_L3_SEL                                                  0

		Configures MIO Pin 62 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800F8, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_62_L0_SEL_MASK | IOU_SLCR_MIO_PIN_62_L1_SEL_MASK | IOU_SLCR_MIO_PIN_62_L2_SEL_MASK | IOU_SLCR_MIO_PIN_62_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_62_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_62_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_62_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_62_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_62_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_63 @ 0XFF1800FC</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem2, Input, gem2_rgmii_rx_ctl- (RX RGMII control )
		PSU_IOU_SLCR_MIO_PIN_63_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb0, Input, usb0_ulpi_rx_data[7]- (ULPI data bus) 1= usb0, Output, usb0_ulpi_tx_
		ata[7]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_63_L1_SEL                                                  1

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_63_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[11]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[11]- (GPIO bank 2) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
		i1_si- (MOSI signal) 5= ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial o
		tput) 7= trace, Output, tracedq[9]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_63_L3_SEL                                                  0

		Configures MIO Pin 63 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF1800FC, 0x000000FEU ,0x00000004U)  
		RegMask = (IOU_SLCR_MIO_PIN_63_L0_SEL_MASK | IOU_SLCR_MIO_PIN_63_L1_SEL_MASK | IOU_SLCR_MIO_PIN_63_L2_SEL_MASK | IOU_SLCR_MIO_PIN_63_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_63_L0_SEL_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_PIN_63_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_63_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_63_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_63_OFFSET ,0x000000FEU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_64 @ 0XFF180100</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_clk- (TX RGMII clock)
		PSU_IOU_SLCR_MIO_PIN_64_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_clk_in- (ULPI Clock)
		PSU_IOU_SLCR_MIO_PIN_64_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_clk_out- (SDSDIO clock) 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_64_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[12]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[12]- (GPIO bank 2) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_sclk_in- (SPI Clock) 4= spi0, Output, s
		i0_sclk_out- (SPI Clock) 5= ttc3, Input, ttc3_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7
		 trace, Output, tracedq[10]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_64_L3_SEL                                                  0

		Configures MIO Pin 64 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180100, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_64_L0_SEL_MASK | IOU_SLCR_MIO_PIN_64_L1_SEL_MASK | IOU_SLCR_MIO_PIN_64_L2_SEL_MASK | IOU_SLCR_MIO_PIN_64_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_64_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_64_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_64_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_65 @ 0XFF180104</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[0]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_65_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_dir- (Data bus direction control)
		PSU_IOU_SLCR_MIO_PIN_65_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_cd_n- (SD card detect from connector) 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_65_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[13]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[13]- (GPIO bank 2) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_n_ss_out[2]- (SPI Master Selects) 5=
		ttc3, Output, ttc3_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= trace, Output, trac
		dq[11]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_65_L3_SEL                                                  0

		Configures MIO Pin 65 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180104, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_65_L0_SEL_MASK | IOU_SLCR_MIO_PIN_65_L1_SEL_MASK | IOU_SLCR_MIO_PIN_65_L2_SEL_MASK | IOU_SLCR_MIO_PIN_65_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_65_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_65_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_65_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_66 @ 0XFF180108</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[1]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_66_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[2]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
		ata[2]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_66_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_cmd_in- (Command Indicator) = sd0, Output, sdio0_cmd_out- (Comman
		 Indicator) 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_66_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[14]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[14]- (GPIO bank 2) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi0, Output, spi0_n_ss_out[1]- (SPI Master Selects) 5= tt
		2, Input, ttc2_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= trace, Output, tracedq[12]- (Trace
		Port Databus)
		PSU_IOU_SLCR_MIO_PIN_66_L3_SEL                                                  0

		Configures MIO Pin 66 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180108, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_66_L0_SEL_MASK | IOU_SLCR_MIO_PIN_66_L1_SEL_MASK | IOU_SLCR_MIO_PIN_66_L2_SEL_MASK | IOU_SLCR_MIO_PIN_66_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_66_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_66_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_66_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_67 @ 0XFF18010C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[2]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_67_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_nxt- (Data flow control signal from the PHY)
		PSU_IOU_SLCR_MIO_PIN_67_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[0]- (8-bit Data bus) = sd0, Output, sdio0_data_out[0]- (8
		bit Data bus) 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_67_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[15]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[15]- (GPIO bank 2) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi0, Input, spi0_n_ss_in- (SPI Master Selects) 4= spi
		, Output, spi0_n_ss_out[0]- (SPI Master Selects) 5= ttc2, Output, ttc2_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd
		 (UART transmitter serial output) 7= trace, Output, tracedq[13]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_67_L3_SEL                                                  0

		Configures MIO Pin 67 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18010C, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_67_L0_SEL_MASK | IOU_SLCR_MIO_PIN_67_L1_SEL_MASK | IOU_SLCR_MIO_PIN_67_L2_SEL_MASK | IOU_SLCR_MIO_PIN_67_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_67_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_67_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_67_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_68 @ 0XFF180110</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_txd[3]- (TX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_68_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[0]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
		ata[0]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_68_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[1]- (8-bit Data bus) = sd0, Output, sdio0_data_out[1]- (8
		bit Data bus) 2= Not Used 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_68_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[16]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[16]- (GPIO bank 2) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi0, Input, spi0_mi- (MISO signal) 4= spi0, Output, spi0
		so- (MISO signal) 5= ttc1, Input, ttc1_clk_in- (TTC Clock) 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= trace
		 Output, tracedq[14]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_68_L3_SEL                                                  0

		Configures MIO Pin 68 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180110, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_68_L0_SEL_MASK | IOU_SLCR_MIO_PIN_68_L1_SEL_MASK | IOU_SLCR_MIO_PIN_68_L2_SEL_MASK | IOU_SLCR_MIO_PIN_68_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_68_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_68_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_68_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_69 @ 0XFF180114</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Output, gem3_rgmii_tx_ctl- (TX RGMII control)
		PSU_IOU_SLCR_MIO_PIN_69_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[1]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
		ata[1]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_69_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[2]- (8-bit Data bus) = sd0, Output, sdio0_data_out[2]- (8
		bit Data bus) 2= sd1, Input, sdio1_wp- (SD card write protect from connector) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_69_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[17]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[17]- (GPIO bank 2) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi0, Output, spi0_mo- (MOSI signal) 4= spi0, Input, sp
		0_si- (MOSI signal) 5= ttc1, Output, ttc1_wave_out- (TTC Waveform Clock) 6= ua1, Input, ua1_rxd- (UART receiver serial input)
		7= trace, Output, tracedq[15]- (Trace Port Databus)
		PSU_IOU_SLCR_MIO_PIN_69_L3_SEL                                                  0

		Configures MIO Pin 69 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180114, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_69_L0_SEL_MASK | IOU_SLCR_MIO_PIN_69_L1_SEL_MASK | IOU_SLCR_MIO_PIN_69_L2_SEL_MASK | IOU_SLCR_MIO_PIN_69_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_69_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_69_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_69_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_70 @ 0XFF180118</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_clk- (RX RGMII clock)
		PSU_IOU_SLCR_MIO_PIN_70_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Output, usb1_ulpi_stp- (Asserted to end or interrupt transfers)
		PSU_IOU_SLCR_MIO_PIN_70_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[3]- (8-bit Data bus) = sd0, Output, sdio0_data_out[3]- (8
		bit Data bus) 2= sd1, Output, sdio1_bus_pow- (SD card bus power) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_70_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[18]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[18]- (GPIO bank 2) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_sclk_in- (SPI Clock) 4= spi1, Output, sp
		1_sclk_out- (SPI Clock) 5= ttc0, Input, ttc0_clk_in- (TTC Clock) 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not 
		sed
		PSU_IOU_SLCR_MIO_PIN_70_L3_SEL                                                  0

		Configures MIO Pin 70 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180118, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_70_L0_SEL_MASK | IOU_SLCR_MIO_PIN_70_L1_SEL_MASK | IOU_SLCR_MIO_PIN_70_L2_SEL_MASK | IOU_SLCR_MIO_PIN_70_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_70_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_70_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_70_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_71 @ 0XFF18011C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[0]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_71_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[3]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
		ata[3]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_71_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[4]- (8-bit Data bus) = sd0, Output, sdio0_data_out[4]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[0]- (8-bit Data bus) = sd1, Output, sdio1_data_out[0]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_71_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[19]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[19]- (GPIO bank 2) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_n_ss_out[2]- (SPI Master Selects) 5
		 ttc0, Output, ttc0_wave_out- (TTC Waveform Clock) 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_71_L3_SEL                                                  0

		Configures MIO Pin 71 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18011C, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_71_L0_SEL_MASK | IOU_SLCR_MIO_PIN_71_L1_SEL_MASK | IOU_SLCR_MIO_PIN_71_L2_SEL_MASK | IOU_SLCR_MIO_PIN_71_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_71_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_71_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_71_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_72 @ 0XFF180120</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[1]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_72_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[4]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
		ata[4]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_72_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[5]- (8-bit Data bus) = sd0, Output, sdio0_data_out[5]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[1]- (8-bit Data bus) = sd1, Output, sdio1_data_out[1]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_72_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[20]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[20]- (GPIO bank 2) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= swdt1, Input, swdt1_clk_in- (Watch Dog Timer Input clock) 4= spi1, Output, spi1_n_ss_out[1]- (SPI Master Selects) 5= N
		t Used 6= ua1, Output, ua1_txd- (UART transmitter serial output) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_72_L3_SEL                                                  0

		Configures MIO Pin 72 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180120, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_72_L0_SEL_MASK | IOU_SLCR_MIO_PIN_72_L1_SEL_MASK | IOU_SLCR_MIO_PIN_72_L2_SEL_MASK | IOU_SLCR_MIO_PIN_72_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_72_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_72_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_72_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_73 @ 0XFF180124</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[2]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_73_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[5]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
		ata[5]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_73_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[6]- (8-bit Data bus) = sd0, Output, sdio0_data_out[6]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[2]- (8-bit Data bus) = sd1, Output, sdio1_data_out[2]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_73_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[21]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[21]- (GPIO bank 2) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= swdt1, Output, swdt1_rst_out- (Watch Dog Timer Output clock) 4= spi1, Input, spi1_n_ss_in- (SPI Master Selects) 4= spi1
		 Output, spi1_n_ss_out[0]- (SPI Master Selects) 5= Not Used 6= ua1, Input, ua1_rxd- (UART receiver serial input) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_73_L3_SEL                                                  0

		Configures MIO Pin 73 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180124, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_73_L0_SEL_MASK | IOU_SLCR_MIO_PIN_73_L1_SEL_MASK | IOU_SLCR_MIO_PIN_73_L2_SEL_MASK | IOU_SLCR_MIO_PIN_73_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_73_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_73_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_73_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_74 @ 0XFF180128</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rxd[3]- (RX RGMII data)
		PSU_IOU_SLCR_MIO_PIN_74_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[6]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
		ata[6]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_74_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sd0_data_in[7]- (8-bit Data bus) = sd0, Output, sdio0_data_out[7]- (8
		bit Data bus) 2= sd1, Input, sd1_data_in[3]- (8-bit Data bus) = sd1, Output, sdio1_data_out[3]- (8-bit Data bus) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_74_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[22]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[22]- (GPIO bank 2) 1= c
		n0, Input, can0_phy_rx- (Can RX signal) 2= i2c0, Input, i2c0_scl_input- (SCL signal) 2= i2c0, Output, i2c0_scl_out- (SCL sign
		l) 3= swdt0, Input, swdt0_clk_in- (Watch Dog Timer Input clock) 4= spi1, Input, spi1_mi- (MISO signal) 4= spi1, Output, spi1_
		o- (MISO signal) 5= Not Used 6= ua0, Input, ua0_rxd- (UART receiver serial input) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_74_L3_SEL                                                  0

		Configures MIO Pin 74 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180128, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_74_L0_SEL_MASK | IOU_SLCR_MIO_PIN_74_L1_SEL_MASK | IOU_SLCR_MIO_PIN_74_L2_SEL_MASK | IOU_SLCR_MIO_PIN_74_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_74_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_74_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_74_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_75 @ 0XFF18012C</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= gem3, Input, gem3_rgmii_rx_ctl- (RX RGMII control )
		PSU_IOU_SLCR_MIO_PIN_75_L0_SEL                                                  1

		Level 1 Mux Select 0= Level 2 Mux Output 1= usb1, Input, usb1_ulpi_rx_data[7]- (ULPI data bus) 1= usb1, Output, usb1_ulpi_tx_
		ata[7]- (ULPI data bus)
		PSU_IOU_SLCR_MIO_PIN_75_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Output, sdio0_bus_pow- (SD card bus power) 2= sd1, Input, sd1_cmd_in- (Comma
		d Indicator) = sd1, Output, sdio1_cmd_out- (Command Indicator) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_75_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[23]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[23]- (GPIO bank 2) 1= c
		n0, Output, can0_phy_tx- (Can TX signal) 2= i2c0, Input, i2c0_sda_input- (SDA signal) 2= i2c0, Output, i2c0_sda_out- (SDA sig
		al) 3= swdt0, Output, swdt0_rst_out- (Watch Dog Timer Output clock) 4= spi1, Output, spi1_mo- (MOSI signal) 4= spi1, Input, s
		i1_si- (MOSI signal) 5= Not Used 6= ua0, Output, ua0_txd- (UART transmitter serial output) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_75_L3_SEL                                                  0

		Configures MIO Pin 75 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF18012C, 0x000000FEU ,0x00000002U)  
		RegMask = (IOU_SLCR_MIO_PIN_75_L0_SEL_MASK | IOU_SLCR_MIO_PIN_75_L1_SEL_MASK | IOU_SLCR_MIO_PIN_75_L2_SEL_MASK | IOU_SLCR_MIO_PIN_75_L3_SEL_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_MIO_PIN_75_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L2_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_75_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_75_OFFSET ,0x000000FEU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_76 @ 0XFF180130</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_76_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_76_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= sd0, Input, sdio0_wp- (SD card write protect from connector) 2= sd1, Output, sdio
		_clk_out- (SDSDIO clock) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_76_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[24]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[24]- (GPIO bank 2) 1= c
		n1, Output, can1_phy_tx- (Can TX signal) 2= i2c1, Input, i2c1_scl_input- (SCL signal) 2= i2c1, Output, i2c1_scl_out- (SCL sig
		al) 3= mdio0, Output, gem0_mdc- (MDIO Clock) 4= mdio1, Output, gem1_mdc- (MDIO Clock) 5= mdio2, Output, gem2_mdc- (MDIO Clock
		 6= mdio3, Output, gem3_mdc- (MDIO Clock) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_76_L3_SEL                                                  6

		Configures MIO Pin 76 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180130, 0x000000FEU ,0x000000C0U)  
		RegMask = (IOU_SLCR_MIO_PIN_76_L0_SEL_MASK | IOU_SLCR_MIO_PIN_76_L1_SEL_MASK | IOU_SLCR_MIO_PIN_76_L2_SEL_MASK | IOU_SLCR_MIO_PIN_76_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_76_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_76_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_76_L2_SEL_SHIFT
			| 0x00000006U << IOU_SLCR_MIO_PIN_76_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_76_OFFSET ,0x000000FEU ,0x000000C0U);
	/*############################################################################################################################ */

		/*Register : MIO_PIN_77 @ 0XFF180134</p>

		Level 0 Mux Select 0= Level 1 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_77_L0_SEL                                                  0

		Level 1 Mux Select 0= Level 2 Mux Output 1= Not Used
		PSU_IOU_SLCR_MIO_PIN_77_L1_SEL                                                  0

		Level 2 Mux Select 0= Level 3 Mux Output 1= Not Used 2= sd1, Input, sdio1_cd_n- (SD card detect from connector) 3= Not Used
		PSU_IOU_SLCR_MIO_PIN_77_L2_SEL                                                  0

		Level 3 Mux Select 0= gpio2, Input, gpio_2_pin_in[25]- (GPIO bank 2) 0= gpio2, Output, gpio_2_pin_out[25]- (GPIO bank 2) 1= c
		n1, Input, can1_phy_rx- (Can RX signal) 2= i2c1, Input, i2c1_sda_input- (SDA signal) 2= i2c1, Output, i2c1_sda_out- (SDA sign
		l) 3= mdio0, Input, gem0_mdio_in- (MDIO Data) 3= mdio0, Output, gem0_mdio_out- (MDIO Data) 4= mdio1, Input, gem1_mdio_in- (MD
		O Data) 4= mdio1, Output, gem1_mdio_out- (MDIO Data) 5= mdio2, Input, gem2_mdio_in- (MDIO Data) 5= mdio2, Output, gem2_mdio_o
		t- (MDIO Data) 6= mdio3, Input, gem3_mdio_in- (MDIO Data) 6= mdio3, Output, gem3_mdio_out- (MDIO Data) 7= Not Used
		PSU_IOU_SLCR_MIO_PIN_77_L3_SEL                                                  6

		Configures MIO Pin 77 peripheral interface mapping
		(OFFSET, MASK, VALUE)      (0XFF180134, 0x000000FEU ,0x000000C0U)  
		RegMask = (IOU_SLCR_MIO_PIN_77_L0_SEL_MASK | IOU_SLCR_MIO_PIN_77_L1_SEL_MASK | IOU_SLCR_MIO_PIN_77_L2_SEL_MASK | IOU_SLCR_MIO_PIN_77_L3_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_PIN_77_L0_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_77_L1_SEL_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_PIN_77_L2_SEL_SHIFT
			| 0x00000006U << IOU_SLCR_MIO_PIN_77_L3_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_PIN_77_OFFSET ,0x000000FEU ,0x000000C0U);
	/*############################################################################################################################ */

		/*Register : MIO_MST_TRI0 @ 0XFF180204</p>

		Master Tri-state Enable for pin 0, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI                                            0

		Master Tri-state Enable for pin 1, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI                                            0

		Master Tri-state Enable for pin 2, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI                                            0

		Master Tri-state Enable for pin 3, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI                                            0

		Master Tri-state Enable for pin 4, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI                                            0

		Master Tri-state Enable for pin 5, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI                                            0

		Master Tri-state Enable for pin 6, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI                                            0

		Master Tri-state Enable for pin 7, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI                                            0

		Master Tri-state Enable for pin 8, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI                                            0

		Master Tri-state Enable for pin 9, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI                                            0

		Master Tri-state Enable for pin 10, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI                                            0

		Master Tri-state Enable for pin 11, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI                                            0

		Master Tri-state Enable for pin 12, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI                                            0

		Master Tri-state Enable for pin 13, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI                                            0

		Master Tri-state Enable for pin 14, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI                                            0

		Master Tri-state Enable for pin 15, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI                                            0

		Master Tri-state Enable for pin 16, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI                                            0

		Master Tri-state Enable for pin 17, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI                                            0

		Master Tri-state Enable for pin 18, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI                                            1

		Master Tri-state Enable for pin 19, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI                                            0

		Master Tri-state Enable for pin 20, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI                                            0

		Master Tri-state Enable for pin 21, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI                                            1

		Master Tri-state Enable for pin 22, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI                                            0

		Master Tri-state Enable for pin 23, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI                                            0

		Master Tri-state Enable for pin 24, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI                                            0

		Master Tri-state Enable for pin 25, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI                                            1

		Master Tri-state Enable for pin 26, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI                                            0

		Master Tri-state Enable for pin 27, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI                                            0

		Master Tri-state Enable for pin 28, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI                                            1

		Master Tri-state Enable for pin 29, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI                                            0

		Master Tri-state Enable for pin 30, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI                                            1

		Master Tri-state Enable for pin 31, active high
		PSU_IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI                                            0

		MIO pin Tri-state Enables, 31:0
		(OFFSET, MASK, VALUE)      (0XFF180204, 0xFFFFFFFFU ,0x52240000U)  
		RegMask = (IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_MASK | IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_00_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_01_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_02_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_03_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_04_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_05_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_06_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_07_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_08_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_09_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_10_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_11_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_12_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_13_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_14_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_15_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_16_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_17_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_18_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_19_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_20_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_21_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_22_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_23_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_24_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_25_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_26_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_27_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_28_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_29_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI0_PIN_30_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI0_PIN_31_TRI_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI0_OFFSET ,0xFFFFFFFFU ,0x52240000U);
	/*############################################################################################################################ */

		/*Register : MIO_MST_TRI1 @ 0XFF180208</p>

		Master Tri-state Enable for pin 32, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI                                            0

		Master Tri-state Enable for pin 33, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI                                            0

		Master Tri-state Enable for pin 34, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI                                            0

		Master Tri-state Enable for pin 35, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI                                            0

		Master Tri-state Enable for pin 36, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI                                            0

		Master Tri-state Enable for pin 37, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI                                            0

		Master Tri-state Enable for pin 38, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI                                            0

		Master Tri-state Enable for pin 39, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI                                            0

		Master Tri-state Enable for pin 40, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI                                            0

		Master Tri-state Enable for pin 41, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI                                            0

		Master Tri-state Enable for pin 42, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI                                            0

		Master Tri-state Enable for pin 43, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI                                            0

		Master Tri-state Enable for pin 44, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI                                            1

		Master Tri-state Enable for pin 45, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI                                            1

		Master Tri-state Enable for pin 46, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI                                            0

		Master Tri-state Enable for pin 47, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI                                            0

		Master Tri-state Enable for pin 48, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI                                            0

		Master Tri-state Enable for pin 49, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI                                            0

		Master Tri-state Enable for pin 50, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI                                            0

		Master Tri-state Enable for pin 51, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI                                            0

		Master Tri-state Enable for pin 52, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI                                            1

		Master Tri-state Enable for pin 53, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI                                            1

		Master Tri-state Enable for pin 54, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI                                            0

		Master Tri-state Enable for pin 55, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI                                            1

		Master Tri-state Enable for pin 56, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI                                            0

		Master Tri-state Enable for pin 57, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI                                            0

		Master Tri-state Enable for pin 58, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI                                            0

		Master Tri-state Enable for pin 59, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI                                            0

		Master Tri-state Enable for pin 60, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI                                            0

		Master Tri-state Enable for pin 61, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI                                            0

		Master Tri-state Enable for pin 62, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI                                            0

		Master Tri-state Enable for pin 63, active high
		PSU_IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI                                            0

		MIO pin Tri-state Enables, 63:32
		(OFFSET, MASK, VALUE)      (0XFF180208, 0xFFFFFFFFU ,0x00B03000U)  
		RegMask = (IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_MASK | IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_32_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_33_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_34_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_35_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_36_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_37_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_38_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_39_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_40_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_41_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_42_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_43_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_44_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_45_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_46_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_47_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_48_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_49_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_50_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_51_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_52_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_53_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_54_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI1_PIN_55_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_56_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_57_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_58_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_59_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_60_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_61_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_62_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI1_PIN_63_TRI_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI1_OFFSET ,0xFFFFFFFFU ,0x00B03000U);
	/*############################################################################################################################ */

		/*Register : MIO_MST_TRI2 @ 0XFF18020C</p>

		Master Tri-state Enable for pin 64, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI                                            0

		Master Tri-state Enable for pin 65, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI                                            0

		Master Tri-state Enable for pin 66, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI                                            0

		Master Tri-state Enable for pin 67, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI                                            0

		Master Tri-state Enable for pin 68, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI                                            0

		Master Tri-state Enable for pin 69, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI                                            0

		Master Tri-state Enable for pin 70, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI                                            1

		Master Tri-state Enable for pin 71, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI                                            1

		Master Tri-state Enable for pin 72, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI                                            1

		Master Tri-state Enable for pin 73, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI                                            1

		Master Tri-state Enable for pin 74, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI                                            1

		Master Tri-state Enable for pin 75, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI                                            1

		Master Tri-state Enable for pin 76, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI                                            0

		Master Tri-state Enable for pin 77, active high
		PSU_IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI                                            0

		MIO pin Tri-state Enables, 77:64
		(OFFSET, MASK, VALUE)      (0XFF18020C, 0x00003FFFU ,0x00000FC0U)  
		RegMask = (IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_MASK | IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_64_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_65_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_66_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_67_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_68_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_69_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_70_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_71_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_72_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_73_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_74_TRI_SHIFT
			| 0x00000001U << IOU_SLCR_MIO_MST_TRI2_PIN_75_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_76_TRI_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_MST_TRI2_PIN_77_TRI_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_MST_TRI2_OFFSET ,0x00003FFFU ,0x00000FC0U);
	/*############################################################################################################################ */

		/*Register : bank0_ctrl0 @ 0XFF180138</p>

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25                                          1

		Drive0 control to MIO Bank 0 - control MIO[25:0]
		(OFFSET, MASK, VALUE)      (0XFF180138, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL0_DRIVE0_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank0_ctrl1 @ 0XFF18013C</p>

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9                                           1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24                                          1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25                                          1

		Drive1 control to MIO Bank 0 - control MIO[25:0]
		(OFFSET, MASK, VALUE)      (0XFF18013C, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL1_DRIVE1_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank0_ctrl3 @ 0XFF180140</p>

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0

		Selects either Schmitt or CMOS input for MIO Bank 0 - control MIO[25:0]
		(OFFSET, MASK, VALUE)      (0XFF180140, 0x03FFFFFFU ,0x00000000U)  
		RegMask = (IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : bank0_ctrl4 @ 0XFF180144</p>

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1

		When mio_bank0_pull_enable is set, this selects pull up or pull down for MIO Bank 0 - control MIO[25:0]
		(OFFSET, MASK, VALUE)      (0XFF180144, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank0_ctrl5 @ 0XFF180148</p>

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9                                      1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24                                     1

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25                                     1

		When set, this enables mio_bank0_pullupdown to selects pull up or pull down for MIO Bank 0 - control MIO[25:0]
		(OFFSET, MASK, VALUE)      (0XFF180148, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK0_CTRL5_PULL_ENABLE_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank0_ctrl6 @ 0XFF18014C</p>

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0

		Each bit applies to a single IO. Bit 0 for MIO[0].
		PSU_IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0

		Slew rate control to MIO Bank 0 - control MIO[25:0]
		(OFFSET, MASK, VALUE)      (0XFF18014C, 0x03FFFFFFU ,0x00000000U)  
		RegMask = (IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
			| 0x00000000U << IOU_SLCR_BANK0_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK0_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : bank1_ctrl0 @ 0XFF180154</p>

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25                                          1

		Drive0 control to MIO Bank 1 - control MIO[51:26]
		(OFFSET, MASK, VALUE)      (0XFF180154, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL0_DRIVE0_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank1_ctrl1 @ 0XFF180158</p>

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9                                           1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24                                          1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25                                          1

		Drive1 control to MIO Bank 1 - control MIO[51:26]
		(OFFSET, MASK, VALUE)      (0XFF180158, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL1_DRIVE1_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank1_ctrl3 @ 0XFF18015C</p>

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0

		Selects either Schmitt or CMOS input for MIO Bank 1 - control MIO[51:26]
		(OFFSET, MASK, VALUE)      (0XFF18015C, 0x03FFFFFFU ,0x00000000U)  
		RegMask = (IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : bank1_ctrl4 @ 0XFF180160</p>

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1

		When mio_bank1_pull_enable is set, this selects pull up or pull down for MIO Bank 1 - control MIO[51:26]
		(OFFSET, MASK, VALUE)      (0XFF180160, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank1_ctrl5 @ 0XFF180164</p>

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9                                      1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24                                     1

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25                                     1

		When set, this enables mio_bank1_pullupdown to selects pull up or pull down for MIO Bank 1 - control MIO[51:26]
		(OFFSET, MASK, VALUE)      (0XFF180164, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK1_CTRL5_PULL_ENABLE_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank1_ctrl6 @ 0XFF180168</p>

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0

		Each bit applies to a single IO. Bit 0 for MIO[26].
		PSU_IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0

		Slew rate control to MIO Bank 1 - control MIO[51:26]
		(OFFSET, MASK, VALUE)      (0XFF180168, 0x03FFFFFFU ,0x00000000U)  
		RegMask = (IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
			| 0x00000000U << IOU_SLCR_BANK1_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK1_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : bank2_ctrl0 @ 0XFF180170</p>

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25                                          1

		Drive0 control to MIO Bank 2 - control MIO[77:52]
		(OFFSET, MASK, VALUE)      (0XFF180170, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_MASK | IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL0_DRIVE0_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL0_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank2_ctrl1 @ 0XFF180174</p>

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9                                           1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24                                          1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25                                          1

		Drive1 control to MIO Bank 2 - control MIO[77:52]
		(OFFSET, MASK, VALUE)      (0XFF180174, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_MASK | IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL1_DRIVE1_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL1_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank2_ctrl3 @ 0XFF180178</p>

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9                                   0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24                                  0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25                                  0

		Selects either Schmitt or CMOS input for MIO Bank 2 - control MIO[77:52]
		(OFFSET, MASK, VALUE)      (0XFF180178, 0x03FFFFFFU ,0x00000000U)  
		RegMask = (IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_0_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_1_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_2_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_3_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_4_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_5_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_6_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_7_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_8_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_9_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_10_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_11_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_12_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_13_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_14_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_15_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_16_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_17_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_18_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_19_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_20_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_21_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_22_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_23_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_24_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL3_SCHMITT_CMOS_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL3_OFFSET ,0x03FFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : bank2_ctrl4 @ 0XFF18017C</p>

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9                                  1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24                                 1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25                                 1

		When mio_bank2_pull_enable is set, this selects pull up or pull down for MIO Bank 2 - control MIO[77:52]
		(OFFSET, MASK, VALUE)      (0XFF18017C, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL4_PULL_HIGH_LOW_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL4_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank2_ctrl5 @ 0XFF180180</p>

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9                                      1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24                                     1

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25                                     1

		When set, this enables mio_bank2_pullupdown to selects pull up or pull down for MIO Bank 2 - control MIO[77:52]
		(OFFSET, MASK, VALUE)      (0XFF180180, 0x03FFFFFFU ,0x03FFFFFFU)  
		RegMask = (IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_MASK | IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_0_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_1_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_2_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_3_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_4_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_5_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_6_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_7_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_8_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_9_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_10_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_11_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_12_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_13_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_14_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_15_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_16_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_17_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_18_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_19_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_20_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_21_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_22_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_23_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_24_SHIFT
			| 0x00000001U << IOU_SLCR_BANK2_CTRL5_PULL_ENABLE_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL5_OFFSET ,0x03FFFFFFU ,0x03FFFFFFU);
	/*############################################################################################################################ */

		/*Register : bank2_ctrl6 @ 0XFF180184</p>

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9                                 0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24                                0

		Each bit applies to a single IO. Bit 0 for MIO[52].
		PSU_IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25                                0

		Slew rate control to MIO Bank 2 - control MIO[77:52]
		(OFFSET, MASK, VALUE)      (0XFF180184, 0x03FFFFFFU ,0x00000000U)  
		RegMask = (IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_MASK | IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_0_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_1_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_2_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_3_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_4_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_5_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_6_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_7_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_8_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_9_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_10_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_11_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_12_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_13_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_14_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_15_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_16_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_17_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_18_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_19_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_20_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_21_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_22_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_23_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_24_SHIFT
			| 0x00000000U << IOU_SLCR_BANK2_CTRL6_SLOW_FAST_SLEW_N_BIT_25_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_BANK2_CTRL6_OFFSET ,0x03FFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		// : LOOPBACK
		/*Register : MIO_LOOPBACK @ 0XFF180200</p>

		I2C Loopback Control. 0 = Connect I2C inputs according to MIO mapping. 1 = Loop I2C 0 outputs to I2C 1 inputs, and I2C 1 outp
		ts to I2C 0 inputs.
		PSU_IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1                                        0

		CAN Loopback Control. 0 = Connect CAN inputs according to MIO mapping. 1 = Loop CAN 0 Tx to CAN 1 Rx, and CAN 1 Tx to CAN 0 R
		.
		PSU_IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1                                        0

		UART Loopback Control. 0 = Connect UART inputs according to MIO mapping. 1 = Loop UART 0 outputs to UART 1 inputs, and UART 1
		outputs to UART 0 inputs. RXD/TXD cross-connected. RTS/CTS cross-connected. DSR, DTR, DCD and RI not used.
		PSU_IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1                                          0

		SPI Loopback Control. 0 = Connect SPI inputs according to MIO mapping. 1 = Loop SPI 0 outputs to SPI 1 inputs, and SPI 1 outp
		ts to SPI 0 inputs. The other SPI core will appear on the LS Slave Select.
		PSU_IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1                                        0

		Loopback function within MIO
		(OFFSET, MASK, VALUE)      (0XFF180200, 0x0000000FU ,0x00000000U)  
		RegMask = (IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_MASK | IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_MASK | IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_MASK | IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_MIO_LOOPBACK_I2C0_LOOP_I2C1_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_CAN0_LOOP_CAN1_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_UA0_LOOP_UA1_SHIFT
			| 0x00000000U << IOU_SLCR_MIO_LOOPBACK_SPI0_LOOP_SPI1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_MIO_LOOPBACK_OFFSET ,0x0000000FU ,0x00000000U);
	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_peripherals_init_data() {
		// : RESET BLOCKS
		// : TIMESTAMP
		/*Register : RST_LPD_IOU2 @ 0XFF5E0238</p>

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET                                        0

		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00100000U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_TIMESTAMP_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00100000U ,0x00000000U);
	/*############################################################################################################################ */

		// : ENET
		/*Register : RST_LPD_IOU0 @ 0XFF5E0230</p>

		GEM 3 reset
		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0

		Software controlled reset for the GEMs
		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000000U);
	/*############################################################################################################################ */

		// : QSPI
		/*Register : RST_LPD_IOU2 @ 0XFF5E0238</p>

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_QSPI_RESET                                             0

		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000001U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU2_QSPI_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_QSPI_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		// : QSPI TAP DELAY
		/*Register : IOU_TAPDLY_BYPASS @ 0XFF180390</p>

		0: Do not by pass the tap delays on the Rx clock signal of LQSPI 1: Bypass the Tap delay on the Rx clock signal of LQSPI
		PSU_IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX                                         1

		IOU tap delay bypass for the LQSPI and NAND controllers
		(OFFSET, MASK, VALUE)      (0XFF180390, 0x00000004U ,0x00000004U)  
		RegMask = (IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SLCR_IOU_TAPDLY_BYPASS_LQSPI_RX_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_IOU_TAPDLY_BYPASS_OFFSET ,0x00000004U ,0x00000004U);
	/*############################################################################################################################ */

		// : NAND
		// : USB
		/*Register : RST_LPD_TOP @ 0XFF5E023C</p>

		USB 0 reset for control registers
		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0

		USB 0 sleep circuit reset
		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0

		USB 0 reset
		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0

		Software control register for the LPD block.
		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000540U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK | CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000540U ,0x00000000U);
	/*############################################################################################################################ */

		// : FPD RESET
		/*Register : RST_FPD_TOP @ 0XFD1A0100</p>

		PCIE config reset
		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0

		PCIE control block level reset
		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0

		PCIE bridge block level reset (AXI interface)
		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0

		Display Port block level reset (includes DPDMA)
		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0

		FPD WDT reset
		PSU_CRF_APB_RST_FPD_TOP_SWDT_RESET                                              0

		GDMA block level reset
		PSU_CRF_APB_RST_FPD_TOP_GDMA_RESET                                              0

		Pixel Processor (submodule of GPU) block level reset
		PSU_CRF_APB_RST_FPD_TOP_GPU_PP0_RESET                                           0

		Pixel Processor (submodule of GPU) block level reset
		PSU_CRF_APB_RST_FPD_TOP_GPU_PP1_RESET                                           0

		GPU block level reset
		PSU_CRF_APB_RST_FPD_TOP_GPU_RESET                                               0

		GT block level reset
		PSU_CRF_APB_RST_FPD_TOP_GT_RESET                                                0

		Sata block level reset
		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0

		FPD Block level software controlled reset
		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000F807EU ,0x00000000U)  
		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK | CRF_APB_RST_FPD_TOP_DP_RESET_MASK | CRF_APB_RST_FPD_TOP_SWDT_RESET_MASK | CRF_APB_RST_FPD_TOP_GDMA_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_MASK | CRF_APB_RST_FPD_TOP_GPU_RESET_MASK | CRF_APB_RST_FPD_TOP_GT_RESET_MASK | CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_SWDT_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_GDMA_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_PP0_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_PP1_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_GPU_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_GT_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000F807EU ,0x00000000U);
	/*############################################################################################################################ */

		// : SD
		/*Register : RST_LPD_IOU2 @ 0XFF5E0238</p>

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_SDIO1_RESET                                            0

		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000040U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU2_SDIO1_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_SDIO1_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000040U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : CTRL_REG_SD @ 0XFF180310</p>

		SD or eMMC selection on SDIO1 0: SD enabled 1: eMMC enabled
		PSU_IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL                                           0

		SD eMMC selection
		(OFFSET, MASK, VALUE)      (0XFF180310, 0x00008000U ,0x00000000U)  
		RegMask = (IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_CTRL_REG_SD_SD1_EMMC_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_CTRL_REG_SD_OFFSET ,0x00008000U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : SD_CONFIG_REG2 @ 0XFF180320</p>

		Should be set based on the final product usage 00 - Removable SCard Slot 01 - Embedded Slot for One Device 10 - Shared Bus Sl
		t 11 - Reserved
		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE                                        0

		1.8V Support 1: 1.8V supported 0: 1.8V not supported support
		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V                                            0

		3.0V Support 1: 3.0V supported 0: 3.0V not supported support
		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V                                            0

		3.3V Support 1: 3.3V supported 0: 3.3V not supported support
		PSU_IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V                                            1

		SD Config Register 2
		(OFFSET, MASK, VALUE)      (0XFF180320, 0x33800000U ,0x00800000U)  
		RegMask = (IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_MASK | IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_SLOTTYPE_SHIFT
			| 0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_1P8V_SHIFT
			| 0x00000000U << IOU_SLCR_SD_CONFIG_REG2_SD1_3P0V_SHIFT
			| 0x00000001U << IOU_SLCR_SD_CONFIG_REG2_SD1_3P3V_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG2_OFFSET ,0x33800000U ,0x00800000U);
	/*############################################################################################################################ */

		// : SD1 BASE CLOCK
		/*Register : SD_CONFIG_REG1 @ 0XFF18031C</p>

		Base Clock Frequency for SD Clock. This is the frequency of the xin_clk.
		PSU_IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK                                         0xc7

		SD Config Register 1
		(OFFSET, MASK, VALUE)      (0XFF18031C, 0x7F800000U ,0x63800000U)  
		RegMask = (IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_MASK |  0 );

		RegVal = ((0x000000C7U << IOU_SLCR_SD_CONFIG_REG1_SD1_BASECLK_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG1_OFFSET ,0x7F800000U ,0x63800000U);
	/*############################################################################################################################ */

		// : SD1 RETUNER
		/*Register : SD_CONFIG_REG3 @ 0XFF180324</p>

		This is the Timer Count for Re-Tuning Timer for Re-Tuning Mode 1 to 3. Setting to 4'b0 disables Re-Tuning Timer. 0h - Get inf
		rmation via other source 1h = 1 seconds 2h = 2 seconds 3h = 4 seconds 4h = 8 seconds -- n = 2(n-1) seconds -- Bh = 1024 secon
		s Fh - Ch = Reserved
		PSU_IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR                                       0X0

		SD Config Register 3
		(OFFSET, MASK, VALUE)      (0XFF180324, 0x03C00000U ,0x00000000U)  
		RegMask = (IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_MASK |  0 );

		RegVal = ((0x00000000U << IOU_SLCR_SD_CONFIG_REG3_SD1_RETUNETMR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SLCR_SD_CONFIG_REG3_OFFSET ,0x03C00000U ,0x00000000U);
	/*############################################################################################################################ */

		// : CAN
		/*Register : RST_LPD_IOU2 @ 0XFF5E0238</p>

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_CAN1_RESET                                             0

		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000100U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU2_CAN1_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_CAN1_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000100U ,0x00000000U);
	/*############################################################################################################################ */

		// : I2C
		/*Register : RST_LPD_IOU2 @ 0XFF5E0238</p>

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_I2C0_RESET                                             0

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_I2C1_RESET                                             0

		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000600U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU2_I2C0_RESET_MASK | CRL_APB_RST_LPD_IOU2_I2C1_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_I2C0_RESET_SHIFT
			| 0x00000000U << CRL_APB_RST_LPD_IOU2_I2C1_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000600U ,0x00000000U);
	/*############################################################################################################################ */

		// : SWDT
		/*Register : RST_LPD_IOU2 @ 0XFF5E0238</p>

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_SWDT_RESET                                             0

		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00008000U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU2_SWDT_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_SWDT_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00008000U ,0x00000000U);
	/*############################################################################################################################ */

		// : SPI
		// : TTC
		/*Register : RST_LPD_IOU2 @ 0XFF5E0238</p>

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_TTC0_RESET                                             0

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_TTC1_RESET                                             0

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_TTC2_RESET                                             0

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_TTC3_RESET                                             0

		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00007800U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU2_TTC0_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC1_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC2_RESET_MASK | CRL_APB_RST_LPD_IOU2_TTC3_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_TTC0_RESET_SHIFT
			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC1_RESET_SHIFT
			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC2_RESET_SHIFT
			| 0x00000000U << CRL_APB_RST_LPD_IOU2_TTC3_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00007800U ,0x00000000U);
	/*############################################################################################################################ */

		// : UART
		/*Register : RST_LPD_IOU2 @ 0XFF5E0238</p>

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_UART0_RESET                                            0

		Block level reset
		PSU_CRL_APB_RST_LPD_IOU2_UART1_RESET                                            0

		Software control register for the IOU block. Each bit will cause a singlerperipheral or part of the peripheral to be reset.
		(OFFSET, MASK, VALUE)      (0XFF5E0238, 0x00000006U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU2_UART0_RESET_MASK | CRL_APB_RST_LPD_IOU2_UART1_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU2_UART0_RESET_SHIFT
			| 0x00000000U << CRL_APB_RST_LPD_IOU2_UART1_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU2_OFFSET ,0x00000006U ,0x00000000U);
	/*############################################################################################################################ */

		// : UART BAUD RATE
		/*Register : Baud_rate_divider_reg0 @ 0XFF000034</p>

		Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate
		PSU_UART0_BAUD_RATE_DIVIDER_REG0_BDIV                                           0x5

		Baud Rate Divider Register
		(OFFSET, MASK, VALUE)      (0XFF000034, 0x000000FFU ,0x00000005U)  
		RegMask = (UART0_BAUD_RATE_DIVIDER_REG0_BDIV_MASK |  0 );

		RegVal = ((0x00000005U << UART0_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (UART0_BAUD_RATE_DIVIDER_REG0_OFFSET ,0x000000FFU ,0x00000005U);
	/*############################################################################################################################ */

		/*Register : Baud_rate_gen_reg0 @ 0XFF000018</p>

		Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample
		PSU_UART0_BAUD_RATE_GEN_REG0_CD                                                 0x8f

		Baud Rate Generator Register.
		(OFFSET, MASK, VALUE)      (0XFF000018, 0x0000FFFFU ,0x0000008FU)  
		RegMask = (UART0_BAUD_RATE_GEN_REG0_CD_MASK |  0 );

		RegVal = ((0x0000008FU << UART0_BAUD_RATE_GEN_REG0_CD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (UART0_BAUD_RATE_GEN_REG0_OFFSET ,0x0000FFFFU ,0x0000008FU);
	/*############################################################################################################################ */

		/*Register : Control_reg0 @ 0XFF000000</p>

		Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
		high level during 12 bit periods. It can be set regardless of the value of STTBRK.
		PSU_UART0_CONTROL_REG0_STPBRK                                                   0x0

		Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.
		PSU_UART0_CONTROL_REG0_STTBRK                                                   0x0

		Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
		pleted.
		PSU_UART0_CONTROL_REG0_RSTTO                                                    0x0

		Transmit disable: 0: enable transmitter 1: disable transmitter
		PSU_UART0_CONTROL_REG0_TXDIS                                                    0x0

		Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.
		PSU_UART0_CONTROL_REG0_TXEN                                                     0x1

		Receive disable: 0: enable 1: disable, regardless of the value of RXEN
		PSU_UART0_CONTROL_REG0_RXDIS                                                    0x0

		Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.
		PSU_UART0_CONTROL_REG0_RXEN                                                     0x1

		Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
		 bit is self clearing once the reset has completed.
		PSU_UART0_CONTROL_REG0_TXRES                                                    0x1

		Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
		is self clearing once the reset has completed.
		PSU_UART0_CONTROL_REG0_RXRES                                                    0x1

		UART Control Register
		(OFFSET, MASK, VALUE)      (0XFF000000, 0x000001FFU ,0x00000017U)  
		RegMask = (UART0_CONTROL_REG0_STPBRK_MASK | UART0_CONTROL_REG0_STTBRK_MASK | UART0_CONTROL_REG0_RSTTO_MASK | UART0_CONTROL_REG0_TXDIS_MASK | UART0_CONTROL_REG0_TXEN_MASK | UART0_CONTROL_REG0_RXDIS_MASK | UART0_CONTROL_REG0_RXEN_MASK | UART0_CONTROL_REG0_TXRES_MASK | UART0_CONTROL_REG0_RXRES_MASK |  0 );

		RegVal = ((0x00000000U << UART0_CONTROL_REG0_STPBRK_SHIFT
			| 0x00000000U << UART0_CONTROL_REG0_STTBRK_SHIFT
			| 0x00000000U << UART0_CONTROL_REG0_RSTTO_SHIFT
			| 0x00000000U << UART0_CONTROL_REG0_TXDIS_SHIFT
			| 0x00000001U << UART0_CONTROL_REG0_TXEN_SHIFT
			| 0x00000000U << UART0_CONTROL_REG0_RXDIS_SHIFT
			| 0x00000001U << UART0_CONTROL_REG0_RXEN_SHIFT
			| 0x00000001U << UART0_CONTROL_REG0_TXRES_SHIFT
			| 0x00000001U << UART0_CONTROL_REG0_RXRES_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (UART0_CONTROL_REG0_OFFSET ,0x000001FFU ,0x00000017U);
	/*############################################################################################################################ */

		/*Register : mode_reg0 @ 0XFF000004</p>

		Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback
		PSU_UART0_MODE_REG0_CHMODE                                                      0x0

		Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
		stop bits 10: 2 stop bits 11: reserved
		PSU_UART0_MODE_REG0_NBSTOP                                                      0x0

		Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity
		PSU_UART0_MODE_REG0_PAR                                                         0x4

		Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits
		PSU_UART0_MODE_REG0_CHRL                                                        0x0

		Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
		source is uart_ref_clk 1: clock source is uart_ref_clk/8
		PSU_UART0_MODE_REG0_CLKS                                                        0x0

		UART Mode Register
		(OFFSET, MASK, VALUE)      (0XFF000004, 0x000003FFU ,0x00000020U)  
		RegMask = (UART0_MODE_REG0_CHMODE_MASK | UART0_MODE_REG0_NBSTOP_MASK | UART0_MODE_REG0_PAR_MASK | UART0_MODE_REG0_CHRL_MASK | UART0_MODE_REG0_CLKS_MASK |  0 );

		RegVal = ((0x00000000U << UART0_MODE_REG0_CHMODE_SHIFT
			| 0x00000000U << UART0_MODE_REG0_NBSTOP_SHIFT
			| 0x00000004U << UART0_MODE_REG0_PAR_SHIFT
			| 0x00000000U << UART0_MODE_REG0_CHRL_SHIFT
			| 0x00000000U << UART0_MODE_REG0_CLKS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (UART0_MODE_REG0_OFFSET ,0x000003FFU ,0x00000020U);
	/*############################################################################################################################ */

		/*Register : Baud_rate_divider_reg0 @ 0XFF010034</p>

		Baud rate divider value: 0 - 3: ignored 4 - 255: Baud rate
		PSU_UART1_BAUD_RATE_DIVIDER_REG0_BDIV                                           0x5

		Baud Rate Divider Register
		(OFFSET, MASK, VALUE)      (0XFF010034, 0x000000FFU ,0x00000005U)  
		RegMask = (UART1_BAUD_RATE_DIVIDER_REG0_BDIV_MASK |  0 );

		RegVal = ((0x00000005U << UART1_BAUD_RATE_DIVIDER_REG0_BDIV_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (UART1_BAUD_RATE_DIVIDER_REG0_OFFSET ,0x000000FFU ,0x00000005U);
	/*############################################################################################################################ */

		/*Register : Baud_rate_gen_reg0 @ 0XFF010018</p>

		Baud Rate Clock Divisor Value: 0: Disables baud_sample 1: Clock divisor bypass (baud_sample = sel_clk) 2 - 65535: baud_sample
		PSU_UART1_BAUD_RATE_GEN_REG0_CD                                                 0x8f

		Baud Rate Generator Register.
		(OFFSET, MASK, VALUE)      (0XFF010018, 0x0000FFFFU ,0x0000008FU)  
		RegMask = (UART1_BAUD_RATE_GEN_REG0_CD_MASK |  0 );

		RegVal = ((0x0000008FU << UART1_BAUD_RATE_GEN_REG0_CD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (UART1_BAUD_RATE_GEN_REG0_OFFSET ,0x0000FFFFU ,0x0000008FU);
	/*############################################################################################################################ */

		/*Register : Control_reg0 @ 0XFF010000</p>

		Stop transmitter break: 0: no affect 1: stop transmission of the break after a minimum of one character length and transmit a
		high level during 12 bit periods. It can be set regardless of the value of STTBRK.
		PSU_UART1_CONTROL_REG0_STPBRK                                                   0x0

		Start transmitter break: 0: no affect 1: start to transmit a break after the characters currently present in the FIFO and the
		transmit shift register have been transmitted. It can only be set if STPBRK (Stop transmitter break) is not high.
		PSU_UART1_CONTROL_REG0_STTBRK                                                   0x0

		Restart receiver timeout counter: 1: receiver timeout counter is restarted. This bit is self clearing once the restart has co
		pleted.
		PSU_UART1_CONTROL_REG0_RSTTO                                                    0x0

		Transmit disable: 0: enable transmitter 1: disable transmitter
		PSU_UART1_CONTROL_REG0_TXDIS                                                    0x0

		Transmit enable: 0: disable transmitter 1: enable transmitter, provided the TXDIS field is set to 0.
		PSU_UART1_CONTROL_REG0_TXEN                                                     0x1

		Receive disable: 0: enable 1: disable, regardless of the value of RXEN
		PSU_UART1_CONTROL_REG0_RXDIS                                                    0x0

		Receive enable: 0: disable 1: enable When set to one, the receiver logic is enabled, provided the RXDIS field is set to zero.
		PSU_UART1_CONTROL_REG0_RXEN                                                     0x1

		Software reset for Tx data path: 0: no affect 1: transmitter logic is reset and all pending transmitter data is discarded Thi
		 bit is self clearing once the reset has completed.
		PSU_UART1_CONTROL_REG0_TXRES                                                    0x1

		Software reset for Rx data path: 0: no affect 1: receiver logic is reset and all pending receiver data is discarded. This bit
		is self clearing once the reset has completed.
		PSU_UART1_CONTROL_REG0_RXRES                                                    0x1

		UART Control Register
		(OFFSET, MASK, VALUE)      (0XFF010000, 0x000001FFU ,0x00000017U)  
		RegMask = (UART1_CONTROL_REG0_STPBRK_MASK | UART1_CONTROL_REG0_STTBRK_MASK | UART1_CONTROL_REG0_RSTTO_MASK | UART1_CONTROL_REG0_TXDIS_MASK | UART1_CONTROL_REG0_TXEN_MASK | UART1_CONTROL_REG0_RXDIS_MASK | UART1_CONTROL_REG0_RXEN_MASK | UART1_CONTROL_REG0_TXRES_MASK | UART1_CONTROL_REG0_RXRES_MASK |  0 );

		RegVal = ((0x00000000U << UART1_CONTROL_REG0_STPBRK_SHIFT
			| 0x00000000U << UART1_CONTROL_REG0_STTBRK_SHIFT
			| 0x00000000U << UART1_CONTROL_REG0_RSTTO_SHIFT
			| 0x00000000U << UART1_CONTROL_REG0_TXDIS_SHIFT
			| 0x00000001U << UART1_CONTROL_REG0_TXEN_SHIFT
			| 0x00000000U << UART1_CONTROL_REG0_RXDIS_SHIFT
			| 0x00000001U << UART1_CONTROL_REG0_RXEN_SHIFT
			| 0x00000001U << UART1_CONTROL_REG0_TXRES_SHIFT
			| 0x00000001U << UART1_CONTROL_REG0_RXRES_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (UART1_CONTROL_REG0_OFFSET ,0x000001FFU ,0x00000017U);
	/*############################################################################################################################ */

		/*Register : mode_reg0 @ 0XFF010004</p>

		Channel mode: Defines the mode of operation of the UART. 00: normal 01: automatic echo 10: local loopback 11: remote loopback
		PSU_UART1_MODE_REG0_CHMODE                                                      0x0

		Number of stop bits: Defines the number of stop bits to detect on receive and to generate on transmit. 00: 1 stop bit 01: 1.5
		stop bits 10: 2 stop bits 11: reserved
		PSU_UART1_MODE_REG0_NBSTOP                                                      0x0

		Parity type select: Defines the expected parity to check on receive and the parity to generate on transmit. 000: even parity 
		01: odd parity 010: forced to 0 parity (space) 011: forced to 1 parity (mark) 1xx: no parity
		PSU_UART1_MODE_REG0_PAR                                                         0x4

		Character length select: Defines the number of bits in each character. 11: 6 bits 10: 7 bits 0x: 8 bits
		PSU_UART1_MODE_REG0_CHRL                                                        0x0

		Clock source select: This field defines whether a pre-scalar of 8 is applied to the baud rate generator input clock. 0: clock
		source is uart_ref_clk 1: clock source is uart_ref_clk/8
		PSU_UART1_MODE_REG0_CLKS                                                        0x0

		UART Mode Register
		(OFFSET, MASK, VALUE)      (0XFF010004, 0x000003FFU ,0x00000020U)  
		RegMask = (UART1_MODE_REG0_CHMODE_MASK | UART1_MODE_REG0_NBSTOP_MASK | UART1_MODE_REG0_PAR_MASK | UART1_MODE_REG0_CHRL_MASK | UART1_MODE_REG0_CLKS_MASK |  0 );

		RegVal = ((0x00000000U << UART1_MODE_REG0_CHMODE_SHIFT
			| 0x00000000U << UART1_MODE_REG0_NBSTOP_SHIFT
			| 0x00000004U << UART1_MODE_REG0_PAR_SHIFT
			| 0x00000000U << UART1_MODE_REG0_CHRL_SHIFT
			| 0x00000000U << UART1_MODE_REG0_CLKS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (UART1_MODE_REG0_OFFSET ,0x000003FFU ,0x00000020U);
	/*############################################################################################################################ */

		// : GPIO
		// : ADMA TZ
		/*Register : slcr_adma @ 0XFF4B0024</p>

		TrustZone Classification for ADMA
		PSU_LPD_SLCR_SECURE_SLCR_ADMA_TZ                                                0XFF

		RPU TrustZone settings
		(OFFSET, MASK, VALUE)      (0XFF4B0024, 0x000000FFU ,0x000000FFU)  
		RegMask = (LPD_SLCR_SECURE_SLCR_ADMA_TZ_MASK |  0 );

		RegVal = ((0x000000FFU << LPD_SLCR_SECURE_SLCR_ADMA_TZ_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (LPD_SLCR_SECURE_SLCR_ADMA_OFFSET ,0x000000FFU ,0x000000FFU);
	/*############################################################################################################################ */

		// : CSU TAMPERING
		// : CSU TAMPER STATUS
		/*Register : tamper_status @ 0XFFCA5000</p>

		CSU regsiter
		PSU_CSU_TAMPER_STATUS_TAMPER_0                                                  0

		External MIO
		PSU_CSU_TAMPER_STATUS_TAMPER_1                                                  0

		JTAG toggle detect
		PSU_CSU_TAMPER_STATUS_TAMPER_2                                                  0

		PL SEU error
		PSU_CSU_TAMPER_STATUS_TAMPER_3                                                  0

		AMS over temperature alarm for LPD
		PSU_CSU_TAMPER_STATUS_TAMPER_4                                                  0

		AMS over temperature alarm for APU
		PSU_CSU_TAMPER_STATUS_TAMPER_5                                                  0

		AMS voltage alarm for VCCPINT_FPD
		PSU_CSU_TAMPER_STATUS_TAMPER_6                                                  0

		AMS voltage alarm for VCCPINT_LPD
		PSU_CSU_TAMPER_STATUS_TAMPER_7                                                  0

		AMS voltage alarm for VCCPAUX
		PSU_CSU_TAMPER_STATUS_TAMPER_8                                                  0

		AMS voltage alarm for DDRPHY
		PSU_CSU_TAMPER_STATUS_TAMPER_9                                                  0

		AMS voltage alarm for PSIO bank 0/1/2
		PSU_CSU_TAMPER_STATUS_TAMPER_10                                                 0

		AMS voltage alarm for PSIO bank 3 (dedicated pins)
		PSU_CSU_TAMPER_STATUS_TAMPER_11                                                 0

		AMS voltaage alarm for GT
		PSU_CSU_TAMPER_STATUS_TAMPER_12                                                 0

		Tamper Response Status
		(OFFSET, MASK, VALUE)      (0XFFCA5000, 0x00001FFFU ,0x00000000U)  
		RegMask = (CSU_TAMPER_STATUS_TAMPER_0_MASK | CSU_TAMPER_STATUS_TAMPER_1_MASK | CSU_TAMPER_STATUS_TAMPER_2_MASK | CSU_TAMPER_STATUS_TAMPER_3_MASK | CSU_TAMPER_STATUS_TAMPER_4_MASK | CSU_TAMPER_STATUS_TAMPER_5_MASK | CSU_TAMPER_STATUS_TAMPER_6_MASK | CSU_TAMPER_STATUS_TAMPER_7_MASK | CSU_TAMPER_STATUS_TAMPER_8_MASK | CSU_TAMPER_STATUS_TAMPER_9_MASK | CSU_TAMPER_STATUS_TAMPER_10_MASK | CSU_TAMPER_STATUS_TAMPER_11_MASK | CSU_TAMPER_STATUS_TAMPER_12_MASK |  0 );

		RegVal = ((0x00000000U << CSU_TAMPER_STATUS_TAMPER_0_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_1_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_2_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_3_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_4_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_5_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_6_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_7_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_8_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_9_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_10_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_11_SHIFT
			| 0x00000000U << CSU_TAMPER_STATUS_TAMPER_12_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CSU_TAMPER_STATUS_OFFSET ,0x00001FFFU ,0x00000000U);
	/*############################################################################################################################ */

		// : CSU TAMPER RESPONSE
		// : AFIFM INTERFACE WIDTH
		// : CPU QOS DEFAULT
		/*Register : ACE_CTRL @ 0XFD5C0060</p>

		Set ACE outgoing AWQOS value
		PSU_APU_ACE_CTRL_AWQOS                                                          0X0

		Set ACE outgoing ARQOS value
		PSU_APU_ACE_CTRL_ARQOS                                                          0X0

		ACE Control Register
		(OFFSET, MASK, VALUE)      (0XFD5C0060, 0x000F000FU ,0x00000000U)  
		RegMask = (APU_ACE_CTRL_AWQOS_MASK | APU_ACE_CTRL_ARQOS_MASK |  0 );

		RegVal = ((0x00000000U << APU_ACE_CTRL_AWQOS_SHIFT
			| 0x00000000U << APU_ACE_CTRL_ARQOS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (APU_ACE_CTRL_OFFSET ,0x000F000FU ,0x00000000U);
	/*############################################################################################################################ */

		// : ENABLES RTC SWITCH TO BATTERY WHEN VCC_PSAUX IS NOT AVAILABLE
		/*Register : CONTROL @ 0XFFA60040</p>

		Enables the RTC. By writing a 0 to this bit, RTC will be powered off and the only module that potentially draws current from 
		he battery will be BBRAM. The value read through this bit does not necessarily reflect whether RTC is enabled or not. It is e
		pected that RTC is enabled every time it is being configured. If RTC is not used in the design, FSBL will disable it by writi
		g a 0 to this bit.
		PSU_RTC_CONTROL_BATTERY_DISABLE                                                 0X1

		This register controls various functionalities within the RTC
		(OFFSET, MASK, VALUE)      (0XFFA60040, 0x80000000U ,0x80000000U)  
		RegMask = (RTC_CONTROL_BATTERY_DISABLE_MASK |  0 );

		RegVal = ((0x00000001U << RTC_CONTROL_BATTERY_DISABLE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (RTC_CONTROL_OFFSET ,0x80000000U ,0x80000000U);
	/*############################################################################################################################ */

		// : TIMESTAMP COUNTER
		/*Register : base_frequency_ID_register @ 0XFF260020</p>

		Frequency in number of ticks per second. Valid range from 10 MHz to 100 MHz.
		PSU_IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ                                  0x5f5e100

		Program this register to match the clock frequency of the timestamp generator, in ticks per second. For example, for a 50 MHz
		clock, program 0x02FAF080. This register is not accessible to the read-only programming interface.
		(OFFSET, MASK, VALUE)      (0XFF260020, 0xFFFFFFFFU ,0x05F5E100U)  
		RegMask = (IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_MASK |  0 );

		RegVal = ((0x05F5E100U << IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_FREQ_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SCNTRS_BASE_FREQUENCY_ID_REGISTER_OFFSET ,0xFFFFFFFFU ,0x05F5E100U);
	/*############################################################################################################################ */

		/*Register : counter_control_register @ 0XFF260000</p>

		Enable 0: The counter is disabled and not incrementing. 1: The counter is enabled and is incrementing.
		PSU_IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN                                      0x1

		Controls the counter increments. This register is not accessible to the read-only programming interface.
		(OFFSET, MASK, VALUE)      (0XFF260000, 0x00000001U ,0x00000001U)  
		RegMask = (IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_MASK |  0 );

		RegVal = ((0x00000001U << IOU_SCNTRS_COUNTER_CONTROL_REGISTER_EN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (IOU_SCNTRS_COUNTER_CONTROL_REGISTER_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		// : TTC SRC SELECT

  return 1;
}
unsigned long psu_post_config_data() {
		// : POST_CONFIG

  return 1;
}
unsigned long psu_peripherals_powerdwn_data() {
		// : POWER DOWN REQUEST INTERRUPT ENABLE
		// : POWER DOWN TRIGGER

  return 1;
}
unsigned long psu_lpd_xppu_data() {
		// : XPPU INTERRUPT ENABLE
		/*Register : IEN @ 0XFF980018</p>

		See Interuppt Status Register for details
		PSU_LPD_XPPU_CFG_IEN_APER_PARITY                                                0X1

		See Interuppt Status Register for details
		PSU_LPD_XPPU_CFG_IEN_APER_TZ                                                    0X1

		See Interuppt Status Register for details
		PSU_LPD_XPPU_CFG_IEN_APER_PERM                                                  0X1

		See Interuppt Status Register for details
		PSU_LPD_XPPU_CFG_IEN_MID_PARITY                                                 0X1

		See Interuppt Status Register for details
		PSU_LPD_XPPU_CFG_IEN_MID_RO                                                     0X1

		See Interuppt Status Register for details
		PSU_LPD_XPPU_CFG_IEN_MID_MISS                                                   0X1

		See Interuppt Status Register for details
		PSU_LPD_XPPU_CFG_IEN_INV_APB                                                    0X1

		Interrupt Enable Register
		(OFFSET, MASK, VALUE)      (0XFF980018, 0x000000EFU ,0x000000EFU)  
		RegMask = (LPD_XPPU_CFG_IEN_APER_PARITY_MASK | LPD_XPPU_CFG_IEN_APER_TZ_MASK | LPD_XPPU_CFG_IEN_APER_PERM_MASK | LPD_XPPU_CFG_IEN_MID_PARITY_MASK | LPD_XPPU_CFG_IEN_MID_RO_MASK | LPD_XPPU_CFG_IEN_MID_MISS_MASK | LPD_XPPU_CFG_IEN_INV_APB_MASK |  0 );

		RegVal = ((0x00000001U << LPD_XPPU_CFG_IEN_APER_PARITY_SHIFT
			| 0x00000001U << LPD_XPPU_CFG_IEN_APER_TZ_SHIFT
			| 0x00000001U << LPD_XPPU_CFG_IEN_APER_PERM_SHIFT
			| 0x00000001U << LPD_XPPU_CFG_IEN_MID_PARITY_SHIFT
			| 0x00000001U << LPD_XPPU_CFG_IEN_MID_RO_SHIFT
			| 0x00000001U << LPD_XPPU_CFG_IEN_MID_MISS_SHIFT
			| 0x00000001U << LPD_XPPU_CFG_IEN_INV_APB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (LPD_XPPU_CFG_IEN_OFFSET ,0x000000EFU ,0x000000EFU);
	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_ddr_xmpu0_data() {

  return 1;
}
unsigned long psu_ddr_xmpu1_data() {

  return 1;
}
unsigned long psu_ddr_xmpu2_data() {

  return 1;
}
unsigned long psu_ddr_xmpu3_data() {

  return 1;
}
unsigned long psu_ddr_xmpu4_data() {

  return 1;
}
unsigned long psu_ddr_xmpu5_data() {

  return 1;
}
unsigned long psu_ocm_xmpu_data() {

  return 1;
}
unsigned long psu_fpd_xmpu_data() {

  return 1;
}
unsigned long psu_protection_lock_data() {

  return 1;
}
unsigned long psu_apply_master_tz() {
		// : RPU
		// : DP TZ
		// : SATA TZ
		// : PCIE TZ
		// : USB TZ
		// : SD TZ
		// : GEM TZ
		// : QSPI TZ
		// : NAND TZ

  return 1;
}
unsigned long psu_serdes_init_data() {
		// : SERDES INITIALIZATION
		// : GT REFERENCE CLOCK SOURCE SELECTION
		/*Register : PLL_REF_SEL0 @ 0XFD410000</p>

		PLL0 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
		PSU_SERDES_PLL_REF_SEL0_PLLREFSEL0                                              0xD

		PLL0 Reference Selection Register
		(OFFSET, MASK, VALUE)      (0XFD410000, 0x0000001FU ,0x0000000DU)  
		RegMask = (SERDES_PLL_REF_SEL0_PLLREFSEL0_MASK |  0 );

		RegVal = ((0x0000000DU << SERDES_PLL_REF_SEL0_PLLREFSEL0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_PLL_REF_SEL0_OFFSET ,0x0000001FU ,0x0000000DU);
	/*############################################################################################################################ */

		/*Register : PLL_REF_SEL1 @ 0XFD410004</p>

		PLL1 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
		PSU_SERDES_PLL_REF_SEL1_PLLREFSEL1                                              0x9

		PLL1 Reference Selection Register
		(OFFSET, MASK, VALUE)      (0XFD410004, 0x0000001FU ,0x00000009U)  
		RegMask = (SERDES_PLL_REF_SEL1_PLLREFSEL1_MASK |  0 );

		RegVal = ((0x00000009U << SERDES_PLL_REF_SEL1_PLLREFSEL1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_PLL_REF_SEL1_OFFSET ,0x0000001FU ,0x00000009U);
	/*############################################################################################################################ */

		/*Register : PLL_REF_SEL2 @ 0XFD410008</p>

		PLL2 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
		PSU_SERDES_PLL_REF_SEL2_PLLREFSEL2                                              0x8

		PLL2 Reference Selection Register
		(OFFSET, MASK, VALUE)      (0XFD410008, 0x0000001FU ,0x00000008U)  
		RegMask = (SERDES_PLL_REF_SEL2_PLLREFSEL2_MASK |  0 );

		RegVal = ((0x00000008U << SERDES_PLL_REF_SEL2_PLLREFSEL2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_PLL_REF_SEL2_OFFSET ,0x0000001FU ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : PLL_REF_SEL3 @ 0XFD41000C</p>

		PLL3 Reference Selection. 0x0 - 5MHz, 0x1 - 9.6MHz, 0x2 - 10MHz, 0x3 - 12MHz, 0x4 - 13MHz, 0x5 - 19.2MHz, 0x6 - 20MHz, 0x7 - 
		4MHz, 0x8 - 26MHz, 0x9 - 27MHz, 0xA - 38.4MHz, 0xB - 40MHz, 0xC - 52MHz, 0xD - 100MHz, 0xE - 108MHz, 0xF - 125MHz, 0x10 - 135
		Hz, 0x11 - 150 MHz. 0x12 to 0x1F - Reserved
		PSU_SERDES_PLL_REF_SEL3_PLLREFSEL3                                              0xF

		PLL3 Reference Selection Register
		(OFFSET, MASK, VALUE)      (0XFD41000C, 0x0000001FU ,0x0000000FU)  
		RegMask = (SERDES_PLL_REF_SEL3_PLLREFSEL3_MASK |  0 );

		RegVal = ((0x0000000FU << SERDES_PLL_REF_SEL3_PLLREFSEL3_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_PLL_REF_SEL3_OFFSET ,0x0000001FU ,0x0000000FU);
	/*############################################################################################################################ */

		// : GT REFERENCE CLOCK FREQUENCY SELECTION
		/*Register : L0_L0_REF_CLK_SEL @ 0XFD402860</p>

		Sel of lane 0 ref clock local mux. Set to 1 to select lane 0 slicer output. Set to 0 to select lane0 ref clock mux output.
		PSU_SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL                                 0x1

		Lane0 Ref Clock Selection Register
		(OFFSET, MASK, VALUE)      (0XFD402860, 0x00000080U ,0x00000080U)  
		RegMask = (SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_L0_REF_CLK_SEL_L0_REF_CLK_LCL_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_L0_REF_CLK_SEL_OFFSET ,0x00000080U ,0x00000080U);
	/*############################################################################################################################ */

		/*Register : L0_L1_REF_CLK_SEL @ 0XFD402864</p>

		Sel of lane 1 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane1 ref clock mux output.
		PSU_SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL                                 0x0

		Bit 3 of lane 1 ref clock mux one hot sel. Set to 1 to select lane 3 slicer output from ref clock network
		PSU_SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3                                   0x1

		Lane1 Ref Clock Selection Register
		(OFFSET, MASK, VALUE)      (0XFD402864, 0x00000088U ,0x00000008U)  
		RegMask = (SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_MASK | SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_LCL_SEL_SHIFT
			| 0x00000001U << SERDES_L0_L1_REF_CLK_SEL_L1_REF_CLK_SEL_3_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_L1_REF_CLK_SEL_OFFSET ,0x00000088U ,0x00000008U);
	/*############################################################################################################################ */

		/*Register : L0_L2_REF_CLK_SEL @ 0XFD402868</p>

		Sel of lane 2 ref clock local mux. Set to 1 to select lane 1 slicer output. Set to 0 to select lane2 ref clock mux output.
		PSU_SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL                                 0x1

		Lane2 Ref Clock Selection Register
		(OFFSET, MASK, VALUE)      (0XFD402868, 0x00000080U ,0x00000080U)  
		RegMask = (SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_L2_REF_CLK_SEL_L2_REF_CLK_LCL_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_L2_REF_CLK_SEL_OFFSET ,0x00000080U ,0x00000080U);
	/*############################################################################################################################ */

		/*Register : L0_L3_REF_CLK_SEL @ 0XFD40286C</p>

		Sel of lane 3 ref clock local mux. Set to 1 to select lane 3 slicer output. Set to 0 to select lane3 ref clock mux output.
		PSU_SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL                                 0x0

		Bit 1 of lane 3 ref clock mux one hot sel. Set to 1 to select lane 1 slicer output from ref clock network
		PSU_SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1                                   0x1

		Lane3 Ref Clock Selection Register
		(OFFSET, MASK, VALUE)      (0XFD40286C, 0x00000082U ,0x00000002U)  
		RegMask = (SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_MASK | SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_LCL_SEL_SHIFT
			| 0x00000001U << SERDES_L0_L3_REF_CLK_SEL_L3_REF_CLK_SEL_1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_L3_REF_CLK_SEL_OFFSET ,0x00000082U ,0x00000002U);
	/*############################################################################################################################ */

		// : ENABLE SPREAD SPECTRUM
		/*Register : L2_TM_PLL_DIG_37 @ 0XFD40A094</p>

		Enable/Disable coarse code satureation limiting logic
		PSU_SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION                         0x1

		Test mode register 37
		(OFFSET, MASK, VALUE)      (0XFD40A094, 0x00000010U ,0x00000010U)  
		RegMask = (SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_PLL_DIG_37_TM_ENABLE_COARSE_SATURATION_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_PLL_DIG_37_OFFSET ,0x00000010U ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : L2_PLL_SS_STEPS_0_LSB @ 0XFD40A368</p>

		Spread Spectrum No of Steps [7:0]
		PSU_SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x38

		Spread Spectrum No of Steps bits 7:0
		(OFFSET, MASK, VALUE)      (0XFD40A368, 0x000000FFU ,0x00000038U)  
		RegMask = (SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );

		RegVal = ((0x00000038U << SERDES_L2_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000038U);
	/*############################################################################################################################ */

		/*Register : L2_PLL_SS_STEPS_1_MSB @ 0XFD40A36C</p>

		Spread Spectrum No of Steps [10:8]
		PSU_SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x03

		Spread Spectrum No of Steps bits 10:8
		(OFFSET, MASK, VALUE)      (0XFD40A36C, 0x00000007U ,0x00000003U)  
		RegMask = (SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );

		RegVal = ((0x00000003U << SERDES_L2_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U);
	/*############################################################################################################################ */

		/*Register : L3_PLL_SS_STEPS_0_LSB @ 0XFD40E368</p>

		Spread Spectrum No of Steps [7:0]
		PSU_SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0xE0

		Spread Spectrum No of Steps bits 7:0
		(OFFSET, MASK, VALUE)      (0XFD40E368, 0x000000FFU ,0x000000E0U)  
		RegMask = (SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );

		RegVal = ((0x000000E0U << SERDES_L3_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x000000E0U);
	/*############################################################################################################################ */

		/*Register : L3_PLL_SS_STEPS_1_MSB @ 0XFD40E36C</p>

		Spread Spectrum No of Steps [10:8]
		PSU_SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x3

		Spread Spectrum No of Steps bits 10:8
		(OFFSET, MASK, VALUE)      (0XFD40E36C, 0x00000007U ,0x00000003U)  
		RegMask = (SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );

		RegVal = ((0x00000003U << SERDES_L3_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U);
	/*############################################################################################################################ */

		/*Register : L1_PLL_SS_STEPS_0_LSB @ 0XFD406368</p>

		Spread Spectrum No of Steps [7:0]
		PSU_SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB                          0x58

		Spread Spectrum No of Steps bits 7:0
		(OFFSET, MASK, VALUE)      (0XFD406368, 0x000000FFU ,0x00000058U)  
		RegMask = (SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_MASK |  0 );

		RegVal = ((0x00000058U << SERDES_L1_PLL_SS_STEPS_0_LSB_SS_NUM_OF_STEPS_0_LSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_0_LSB_OFFSET ,0x000000FFU ,0x00000058U);
	/*############################################################################################################################ */

		/*Register : L1_PLL_SS_STEPS_1_MSB @ 0XFD40636C</p>

		Spread Spectrum No of Steps [10:8]
		PSU_SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB                          0x3

		Spread Spectrum No of Steps bits 10:8
		(OFFSET, MASK, VALUE)      (0XFD40636C, 0x00000007U ,0x00000003U)  
		RegMask = (SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_MASK |  0 );

		RegVal = ((0x00000003U << SERDES_L1_PLL_SS_STEPS_1_MSB_SS_NUM_OF_STEPS_1_MSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_PLL_SS_STEPS_1_MSB_OFFSET ,0x00000007U ,0x00000003U);
	/*############################################################################################################################ */

		/*Register : L1_PLL_SS_STEP_SIZE_0_LSB @ 0XFD406370</p>

		Step Size for Spread Spectrum [7:0]
		PSU_SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0x7C

		Step Size for Spread Spectrum LSB
		(OFFSET, MASK, VALUE)      (0XFD406370, 0x000000FFU ,0x0000007CU)  
		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );

		RegVal = ((0x0000007CU << SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x0000007CU);
	/*############################################################################################################################ */

		/*Register : L1_PLL_SS_STEP_SIZE_1 @ 0XFD406374</p>

		Step Size for Spread Spectrum [15:8]
		PSU_SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x33

		Step Size for Spread Spectrum 1
		(OFFSET, MASK, VALUE)      (0XFD406374, 0x000000FFU ,0x00000033U)  
		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );

		RegVal = ((0x00000033U << SERDES_L1_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000033U);
	/*############################################################################################################################ */

		/*Register : L1_PLL_SS_STEP_SIZE_2 @ 0XFD406378</p>

		Step Size for Spread Spectrum [23:16]
		PSU_SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x2

		Step Size for Spread Spectrum 2
		(OFFSET, MASK, VALUE)      (0XFD406378, 0x000000FFU ,0x00000002U)  
		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );

		RegVal = ((0x00000002U << SERDES_L1_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : L1_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40637C</p>

		Step Size for Spread Spectrum [25:24]
		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0

		Enable/Disable test mode force on SS step size
		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1

		Enable/Disable test mode force on SS no of steps
		PSU_SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1

		Enable force on enable Spread Spectrum
		(OFFSET, MASK, VALUE)      (0XFD40637C, 0x00000033U ,0x00000030U)  
		RegMask = (SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
			| 0x00000001U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
			| 0x00000001U << SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x00000033U ,0x00000030U);
	/*############################################################################################################################ */

		/*Register : L2_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40A370</p>

		Step Size for Spread Spectrum [7:0]
		PSU_SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0xF4

		Step Size for Spread Spectrum LSB
		(OFFSET, MASK, VALUE)      (0XFD40A370, 0x000000FFU ,0x000000F4U)  
		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );

		RegVal = ((0x000000F4U << SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x000000F4U);
	/*############################################################################################################################ */

		/*Register : L2_PLL_SS_STEP_SIZE_1 @ 0XFD40A374</p>

		Step Size for Spread Spectrum [15:8]
		PSU_SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0x31

		Step Size for Spread Spectrum 1
		(OFFSET, MASK, VALUE)      (0XFD40A374, 0x000000FFU ,0x00000031U)  
		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );

		RegVal = ((0x00000031U << SERDES_L2_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x00000031U);
	/*############################################################################################################################ */

		/*Register : L2_PLL_SS_STEP_SIZE_2 @ 0XFD40A378</p>

		Step Size for Spread Spectrum [23:16]
		PSU_SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x2

		Step Size for Spread Spectrum 2
		(OFFSET, MASK, VALUE)      (0XFD40A378, 0x000000FFU ,0x00000002U)  
		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );

		RegVal = ((0x00000002U << SERDES_L2_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : L2_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40A37C</p>

		Step Size for Spread Spectrum [25:24]
		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0

		Enable/Disable test mode force on SS step size
		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1

		Enable/Disable test mode force on SS no of steps
		PSU_SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1

		Enable force on enable Spread Spectrum
		(OFFSET, MASK, VALUE)      (0XFD40A37C, 0x00000033U ,0x00000030U)  
		RegMask = (SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
			| 0x00000001U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
			| 0x00000001U << SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x00000033U ,0x00000030U);
	/*############################################################################################################################ */

		/*Register : L3_PLL_SS_STEP_SIZE_0_LSB @ 0XFD40E370</p>

		Step Size for Spread Spectrum [7:0]
		PSU_SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB                         0xC9

		Step Size for Spread Spectrum LSB
		(OFFSET, MASK, VALUE)      (0XFD40E370, 0x000000FFU ,0x000000C9U)  
		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_MASK |  0 );

		RegVal = ((0x000000C9U << SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_SS_STEP_SIZE_0_LSB_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_0_LSB_OFFSET ,0x000000FFU ,0x000000C9U);
	/*############################################################################################################################ */

		/*Register : L3_PLL_SS_STEP_SIZE_1 @ 0XFD40E374</p>

		Step Size for Spread Spectrum [15:8]
		PSU_SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1                                 0xD2

		Step Size for Spread Spectrum 1
		(OFFSET, MASK, VALUE)      (0XFD40E374, 0x000000FFU ,0x000000D2U)  
		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_MASK |  0 );

		RegVal = ((0x000000D2U << SERDES_L3_PLL_SS_STEP_SIZE_1_SS_STEP_SIZE_1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_1_OFFSET ,0x000000FFU ,0x000000D2U);
	/*############################################################################################################################ */

		/*Register : L3_PLL_SS_STEP_SIZE_2 @ 0XFD40E378</p>

		Step Size for Spread Spectrum [23:16]
		PSU_SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2                                 0x1

		Step Size for Spread Spectrum 2
		(OFFSET, MASK, VALUE)      (0XFD40E378, 0x000000FFU ,0x00000001U)  
		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_2_SS_STEP_SIZE_2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_2_OFFSET ,0x000000FFU ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : L3_PLL_SS_STEP_SIZE_3_MSB @ 0XFD40E37C</p>

		Step Size for Spread Spectrum [25:24]
		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB                         0x0

		Enable/Disable test mode force on SS step size
		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE                         0x1

		Enable/Disable test mode force on SS no of steps
		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS                      0x1

		Enable test mode forcing on enable Spread Spectrum
		PSU_SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS                             0x1

		Enable force on enable Spread Spectrum
		(OFFSET, MASK, VALUE)      (0XFD40E37C, 0x000000B3U ,0x000000B0U)  
		RegMask = (SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_MASK | SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_SS_STEP_SIZE_3_MSB_SHIFT
			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_STEP_SIZE_SHIFT
			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_FORCE_SS_NUM_OF_STEPS_SHIFT
			| 0x00000001U << SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_TM_FORCE_EN_SS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_PLL_SS_STEP_SIZE_3_MSB_OFFSET ,0x000000B3U ,0x000000B0U);
	/*############################################################################################################################ */

		/*Register : L2_TM_DIG_6 @ 0XFD40906C</p>

		Bypass Descrambler
		PSU_SERDES_L2_TM_DIG_6_BYPASS_DESCRAM                                           0x1

		Enable Bypass for <1> TM_DIG_CTRL_6
		PSU_SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM                                     0x1

		Data path test modes in decoder and descram
		(OFFSET, MASK, VALUE)      (0XFD40906C, 0x00000003U ,0x00000003U)  
		RegMask = (SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_MASK | SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_DIG_6_BYPASS_DESCRAM_SHIFT
			| 0x00000001U << SERDES_L2_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_DIG_6_OFFSET ,0x00000003U ,0x00000003U);
	/*############################################################################################################################ */

		/*Register : L2_TX_DIG_TM_61 @ 0XFD4080F4</p>

		Bypass scrambler signal
		PSU_SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM                                         0x1

		Enable/disable scrambler bypass signal
		PSU_SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM                                   0x1

		MPHY PLL Gear and bypass scrambler
		(OFFSET, MASK, VALUE)      (0XFD4080F4, 0x00000003U ,0x00000003U)  
		RegMask = (SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_MASK | SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT
			| 0x00000001U << SERDES_L2_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TX_DIG_TM_61_OFFSET ,0x00000003U ,0x00000003U);
	/*############################################################################################################################ */

		/*Register : L3_PLL_FBDIV_FRAC_3_MSB @ 0XFD40E360</p>

		Enable test mode force on fractional mode enable
		PSU_SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC                             0x1

		Fractional feedback division control and fractional value for feedback division bits 26:24
		(OFFSET, MASK, VALUE)      (0XFD40E360, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_PLL_FBDIV_FRAC_3_MSB_TM_FORCE_EN_FRAC_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_PLL_FBDIV_FRAC_3_MSB_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : L3_TM_DIG_6 @ 0XFD40D06C</p>

		Bypass 8b10b decoder
		PSU_SERDES_L3_TM_DIG_6_BYPASS_DECODER                                           0x1

		Enable Bypass for <3> TM_DIG_CTRL_6
		PSU_SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC                                         0x1

		Bypass Descrambler
		PSU_SERDES_L3_TM_DIG_6_BYPASS_DESCRAM                                           0x1

		Enable Bypass for <1> TM_DIG_CTRL_6
		PSU_SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM                                     0x1

		Data path test modes in decoder and descram
		(OFFSET, MASK, VALUE)      (0XFD40D06C, 0x0000000FU ,0x0000000FU)  
		RegMask = (SERDES_L3_TM_DIG_6_BYPASS_DECODER_MASK | SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_MASK | SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_MASK | SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_DIG_6_BYPASS_DECODER_SHIFT
			| 0x00000001U << SERDES_L3_TM_DIG_6_FORCE_BYPASS_DEC_SHIFT
			| 0x00000001U << SERDES_L3_TM_DIG_6_BYPASS_DESCRAM_SHIFT
			| 0x00000001U << SERDES_L3_TM_DIG_6_FORCE_BYPASS_DESCRAM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_DIG_6_OFFSET ,0x0000000FU ,0x0000000FU);
	/*############################################################################################################################ */

		/*Register : L3_TX_DIG_TM_61 @ 0XFD40C0F4</p>

		Enable/disable encoder bypass signal
		PSU_SERDES_L3_TX_DIG_TM_61_BYPASS_ENC                                           0x1

		Bypass scrambler signal
		PSU_SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM                                         0x1

		Enable/disable scrambler bypass signal
		PSU_SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM                                   0x1

		MPHY PLL Gear and bypass scrambler
		(OFFSET, MASK, VALUE)      (0XFD40C0F4, 0x0000000BU ,0x0000000BU)  
		RegMask = (SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_MASK | SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_MASK | SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TX_DIG_TM_61_BYPASS_ENC_SHIFT
			| 0x00000001U << SERDES_L3_TX_DIG_TM_61_BYPASS_SCRAM_SHIFT
			| 0x00000001U << SERDES_L3_TX_DIG_TM_61_FORCE_BYPASS_SCRAM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TX_DIG_TM_61_OFFSET ,0x0000000BU ,0x0000000BU);
	/*############################################################################################################################ */

		/*Register : L3_TXPMA_ST_0 @ 0XFD40CB00</p>

		PHY Mode: 4'b000 - PCIe, 4'b001 - USB3, 4'b0010 - SATA, 4'b0100 - SGMII, 4'b0101 - DP, 4'b1000 - MPHY
		PSU_SERDES_L3_TXPMA_ST_0_TX_PHY_MODE                                            0x21

		Opmode Info
		(OFFSET, MASK, VALUE)      (0XFD40CB00, 0x000000F0U ,0x000000F0U)  
		RegMask = (SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_MASK |  0 );

		RegVal = ((0x00000021U << SERDES_L3_TXPMA_ST_0_TX_PHY_MODE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TXPMA_ST_0_OFFSET ,0x000000F0U ,0x000000F0U);
	/*############################################################################################################################ */

		// : ENABLE CHICKEN BIT FOR PCIE AND USB
		/*Register : L0_TM_AUX_0 @ 0XFD4010CC</p>

		Spare- not used
		PSU_SERDES_L0_TM_AUX_0_BIT_2                                                    1

		Spare registers
		(OFFSET, MASK, VALUE)      (0XFD4010CC, 0x00000020U ,0x00000020U)  
		RegMask = (SERDES_L0_TM_AUX_0_BIT_2_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_TM_AUX_0_BIT_2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_AUX_0_OFFSET ,0x00000020U ,0x00000020U);
	/*############################################################################################################################ */

		/*Register : L2_TM_AUX_0 @ 0XFD4090CC</p>

		Spare- not used
		PSU_SERDES_L2_TM_AUX_0_BIT_2                                                    1

		Spare registers
		(OFFSET, MASK, VALUE)      (0XFD4090CC, 0x00000020U ,0x00000020U)  
		RegMask = (SERDES_L2_TM_AUX_0_BIT_2_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_AUX_0_BIT_2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_AUX_0_OFFSET ,0x00000020U ,0x00000020U);
	/*############################################################################################################################ */

		// : ENABLING EYE SURF
		/*Register : L0_TM_DIG_8 @ 0XFD401074</p>

		Enable Eye Surf
		PSU_SERDES_L0_TM_DIG_8_EYESURF_ENABLE                                           0x1

		Test modes for Elastic buffer and enabling Eye Surf
		(OFFSET, MASK, VALUE)      (0XFD401074, 0x00000010U ,0x00000010U)  
		RegMask = (SERDES_L0_TM_DIG_8_EYESURF_ENABLE_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_TM_DIG_8_EYESURF_ENABLE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : L1_TM_DIG_8 @ 0XFD405074</p>

		Enable Eye Surf
		PSU_SERDES_L1_TM_DIG_8_EYESURF_ENABLE                                           0x1

		Test modes for Elastic buffer and enabling Eye Surf
		(OFFSET, MASK, VALUE)      (0XFD405074, 0x00000010U ,0x00000010U)  
		RegMask = (SERDES_L1_TM_DIG_8_EYESURF_ENABLE_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L1_TM_DIG_8_EYESURF_ENABLE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : L2_TM_DIG_8 @ 0XFD409074</p>

		Enable Eye Surf
		PSU_SERDES_L2_TM_DIG_8_EYESURF_ENABLE                                           0x1

		Test modes for Elastic buffer and enabling Eye Surf
		(OFFSET, MASK, VALUE)      (0XFD409074, 0x00000010U ,0x00000010U)  
		RegMask = (SERDES_L2_TM_DIG_8_EYESURF_ENABLE_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_DIG_8_EYESURF_ENABLE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : L3_TM_DIG_8 @ 0XFD40D074</p>

		Enable Eye Surf
		PSU_SERDES_L3_TM_DIG_8_EYESURF_ENABLE                                           0x1

		Test modes for Elastic buffer and enabling Eye Surf
		(OFFSET, MASK, VALUE)      (0XFD40D074, 0x00000010U ,0x00000010U)  
		RegMask = (SERDES_L3_TM_DIG_8_EYESURF_ENABLE_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_DIG_8_EYESURF_ENABLE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_DIG_8_OFFSET ,0x00000010U ,0x00000010U);
	/*############################################################################################################################ */

		// : ILL SETTINGS FOR GAIN AND LOCK SETTINGS
		/*Register : L0_TM_MISC2 @ 0XFD40189C</p>

		ILL calib counts BYPASSED with calcode bits
		PSU_SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS                                    0x1

		sampler cal
		(OFFSET, MASK, VALUE)      (0XFD40189C, 0x00000080U ,0x00000080U)  
		RegMask = (SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U);
	/*############################################################################################################################ */

		/*Register : L0_TM_IQ_ILL1 @ 0XFD4018F8</p>

		IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS
		PSU_SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0                               0x64

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD4018F8, 0x000000FFU ,0x00000064U)  
		RegMask = (SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK |  0 );

		RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x00000064U);
	/*############################################################################################################################ */

		/*Register : L0_TM_IQ_ILL2 @ 0XFD4018FC</p>

		IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2
		PSU_SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1                               0x64

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD4018FC, 0x000000FFU ,0x00000064U)  
		RegMask = (SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK |  0 );

		RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x00000064U);
	/*############################################################################################################################ */

		/*Register : L0_TM_ILL12 @ 0XFD401990</p>

		G1A pll ctr bypass value
		PSU_SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL                                      0x11

		ill pll counter values
		(OFFSET, MASK, VALUE)      (0XFD401990, 0x000000FFU ,0x00000011U)  
		RegMask = (SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK |  0 );

		RegVal = ((0x00000011U << SERDES_L0_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_ILL12_OFFSET ,0x000000FFU ,0x00000011U);
	/*############################################################################################################################ */

		/*Register : L0_TM_E_ILL1 @ 0XFD401924</p>

		E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS
		PSU_SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0                                 0x4

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD401924, 0x000000FFU ,0x00000004U)  
		RegMask = (SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK |  0 );

		RegVal = ((0x00000004U << SERDES_L0_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_E_ILL1_OFFSET ,0x000000FFU ,0x00000004U);
	/*############################################################################################################################ */

		/*Register : L0_TM_E_ILL2 @ 0XFD401928</p>

		E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2
		PSU_SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1                                 0xFE

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD401928, 0x000000FFU ,0x000000FEU)  
		RegMask = (SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK |  0 );

		RegVal = ((0x000000FEU << SERDES_L0_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_E_ILL2_OFFSET ,0x000000FFU ,0x000000FEU);
	/*############################################################################################################################ */

		/*Register : L0_TM_IQ_ILL3 @ 0XFD401900</p>

		IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3
		PSU_SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2                               0x64

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD401900, 0x000000FFU ,0x00000064U)  
		RegMask = (SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK |  0 );

		RegVal = ((0x00000064U << SERDES_L0_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x00000064U);
	/*############################################################################################################################ */

		/*Register : L0_TM_E_ILL3 @ 0XFD40192C</p>

		E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3
		PSU_SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2                                 0x0

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD40192C, 0x000000FFU ,0x00000000U)  
		RegMask = (SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L0_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : L0_TM_ILL8 @ 0XFD401980</p>

		ILL calibration code change wait time
		PSU_SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT                                         0xFF

		ILL cal routine control
		(OFFSET, MASK, VALUE)      (0XFD401980, 0x000000FFU ,0x000000FFU)  
		RegMask = (SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_MASK |  0 );

		RegVal = ((0x000000FFU << SERDES_L0_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU);
	/*############################################################################################################################ */

		/*Register : L0_TM_IQ_ILL8 @ 0XFD401914</p>

		IQ ILL polytrim bypass value
		PSU_SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL                             0xF7

		iqpi polytrim
		(OFFSET, MASK, VALUE)      (0XFD401914, 0x000000FFU ,0x000000F7U)  
		RegMask = (SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK |  0 );

		RegVal = ((0x000000F7U << SERDES_L0_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U);
	/*############################################################################################################################ */

		/*Register : L0_TM_IQ_ILL9 @ 0XFD401918</p>

		bypass IQ polytrim
		PSU_SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM                                  0x1

		enables for lf,constant gm trim and polytirm
		(OFFSET, MASK, VALUE)      (0XFD401918, 0x00000001U ,0x00000001U)  
		RegMask = (SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : L0_TM_E_ILL8 @ 0XFD401940</p>

		E ILL polytrim bypass value
		PSU_SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL                               0xF7

		epi polytrim
		(OFFSET, MASK, VALUE)      (0XFD401940, 0x000000FFU ,0x000000F7U)  
		RegMask = (SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK |  0 );

		RegVal = ((0x000000F7U << SERDES_L0_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U);
	/*############################################################################################################################ */

		/*Register : L0_TM_E_ILL9 @ 0XFD401944</p>

		bypass E polytrim
		PSU_SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM                                    0x1

		enables for lf,constant gm trim and polytirm
		(OFFSET, MASK, VALUE)      (0XFD401944, 0x00000001U ,0x00000001U)  
		RegMask = (SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : L2_TM_MISC2 @ 0XFD40989C</p>

		ILL calib counts BYPASSED with calcode bits
		PSU_SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS                                    0x1

		sampler cal
		(OFFSET, MASK, VALUE)      (0XFD40989C, 0x00000080U ,0x00000080U)  
		RegMask = (SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U);
	/*############################################################################################################################ */

		/*Register : L2_TM_IQ_ILL1 @ 0XFD4098F8</p>

		IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS
		PSU_SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0                               0x1A

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD4098F8, 0x000000FFU ,0x0000001AU)  
		RegMask = (SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK |  0 );

		RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x0000001AU);
	/*############################################################################################################################ */

		/*Register : L2_TM_IQ_ILL2 @ 0XFD4098FC</p>

		IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2
		PSU_SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1                               0x1A

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD4098FC, 0x000000FFU ,0x0000001AU)  
		RegMask = (SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK |  0 );

		RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x0000001AU);
	/*############################################################################################################################ */

		/*Register : L2_TM_ILL12 @ 0XFD409990</p>

		G1A pll ctr bypass value
		PSU_SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL                                      0x10

		ill pll counter values
		(OFFSET, MASK, VALUE)      (0XFD409990, 0x000000FFU ,0x00000010U)  
		RegMask = (SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK |  0 );

		RegVal = ((0x00000010U << SERDES_L2_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_ILL12_OFFSET ,0x000000FFU ,0x00000010U);
	/*############################################################################################################################ */

		/*Register : L2_TM_E_ILL1 @ 0XFD409924</p>

		E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS
		PSU_SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0                                 0xFE

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD409924, 0x000000FFU ,0x000000FEU)  
		RegMask = (SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK |  0 );

		RegVal = ((0x000000FEU << SERDES_L2_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_E_ILL1_OFFSET ,0x000000FFU ,0x000000FEU);
	/*############################################################################################################################ */

		/*Register : L2_TM_E_ILL2 @ 0XFD409928</p>

		E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2
		PSU_SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1                                 0x0

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD409928, 0x000000FFU ,0x00000000U)  
		RegMask = (SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L2_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_E_ILL2_OFFSET ,0x000000FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : L2_TM_IQ_ILL3 @ 0XFD409900</p>

		IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3
		PSU_SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2                               0x1A

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD409900, 0x000000FFU ,0x0000001AU)  
		RegMask = (SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK |  0 );

		RegVal = ((0x0000001AU << SERDES_L2_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x0000001AU);
	/*############################################################################################################################ */

		/*Register : L2_TM_E_ILL3 @ 0XFD40992C</p>

		E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3
		PSU_SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2                                 0x0

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD40992C, 0x000000FFU ,0x00000000U)  
		RegMask = (SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L2_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : L2_TM_ILL8 @ 0XFD409980</p>

		ILL calibration code change wait time
		PSU_SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT                                         0xFF

		ILL cal routine control
		(OFFSET, MASK, VALUE)      (0XFD409980, 0x000000FFU ,0x000000FFU)  
		RegMask = (SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_MASK |  0 );

		RegVal = ((0x000000FFU << SERDES_L2_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU);
	/*############################################################################################################################ */

		/*Register : L2_TM_IQ_ILL8 @ 0XFD409914</p>

		IQ ILL polytrim bypass value
		PSU_SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL                             0xF7

		iqpi polytrim
		(OFFSET, MASK, VALUE)      (0XFD409914, 0x000000FFU ,0x000000F7U)  
		RegMask = (SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK |  0 );

		RegVal = ((0x000000F7U << SERDES_L2_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U);
	/*############################################################################################################################ */

		/*Register : L2_TM_IQ_ILL9 @ 0XFD409918</p>

		bypass IQ polytrim
		PSU_SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM                                  0x1

		enables for lf,constant gm trim and polytirm
		(OFFSET, MASK, VALUE)      (0XFD409918, 0x00000001U ,0x00000001U)  
		RegMask = (SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : L2_TM_E_ILL8 @ 0XFD409940</p>

		E ILL polytrim bypass value
		PSU_SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL                               0xF7

		epi polytrim
		(OFFSET, MASK, VALUE)      (0XFD409940, 0x000000FFU ,0x000000F7U)  
		RegMask = (SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK |  0 );

		RegVal = ((0x000000F7U << SERDES_L2_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U);
	/*############################################################################################################################ */

		/*Register : L2_TM_E_ILL9 @ 0XFD409944</p>

		bypass E polytrim
		PSU_SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM                                    0x1

		enables for lf,constant gm trim and polytirm
		(OFFSET, MASK, VALUE)      (0XFD409944, 0x00000001U ,0x00000001U)  
		RegMask = (SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : L3_TM_MISC2 @ 0XFD40D89C</p>

		ILL calib counts BYPASSED with calcode bits
		PSU_SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS                                    0x1

		sampler cal
		(OFFSET, MASK, VALUE)      (0XFD40D89C, 0x00000080U ,0x00000080U)  
		RegMask = (SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_MISC2_ILL_CAL_BYPASS_COUNTS_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_MISC2_OFFSET ,0x00000080U ,0x00000080U);
	/*############################################################################################################################ */

		/*Register : L3_TM_IQ_ILL1 @ 0XFD40D8F8</p>

		IQ ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS
		PSU_SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0                               0x7D

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD40D8F8, 0x000000FFU ,0x0000007DU)  
		RegMask = (SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_MASK |  0 );

		RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL1_ILL_BYPASS_IQ_CALCODE_F0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_IQ_ILL1_OFFSET ,0x000000FFU ,0x0000007DU);
	/*############################################################################################################################ */

		/*Register : L3_TM_IQ_ILL2 @ 0XFD40D8FC</p>

		IQ ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2
		PSU_SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1                               0x7D

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD40D8FC, 0x000000FFU ,0x0000007DU)  
		RegMask = (SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_MASK |  0 );

		RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL2_ILL_BYPASS_IQ_CALCODE_F1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_IQ_ILL2_OFFSET ,0x000000FFU ,0x0000007DU);
	/*############################################################################################################################ */

		/*Register : L3_TM_ILL12 @ 0XFD40D990</p>

		G1A pll ctr bypass value
		PSU_SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL                                      0x1

		ill pll counter values
		(OFFSET, MASK, VALUE)      (0XFD40D990, 0x000000FFU ,0x00000001U)  
		RegMask = (SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_ILL12_G1A_PLL_CTR_BYP_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_ILL12_OFFSET ,0x000000FFU ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : L3_TM_E_ILL1 @ 0XFD40D924</p>

		E ILL F0 CALCODE bypass value. MPHY : G1a, PCIE : Gen 1, SATA : Gen1 , USB3 : SS
		PSU_SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0                                 0x9C

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD40D924, 0x000000FFU ,0x0000009CU)  
		RegMask = (SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_MASK |  0 );

		RegVal = ((0x0000009CU << SERDES_L3_TM_E_ILL1_ILL_BYPASS_E_CALCODE_F0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_E_ILL1_OFFSET ,0x000000FFU ,0x0000009CU);
	/*############################################################################################################################ */

		/*Register : L3_TM_E_ILL2 @ 0XFD40D928</p>

		E ILL F1 CALCODE bypass value. MPHY : G1b, PCIE : Gen2, SATA: Gen2
		PSU_SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1                                 0x39

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD40D928, 0x000000FFU ,0x00000039U)  
		RegMask = (SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_MASK |  0 );

		RegVal = ((0x00000039U << SERDES_L3_TM_E_ILL2_ILL_BYPASS_E_CALCODE_F1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_E_ILL2_OFFSET ,0x000000FFU ,0x00000039U);
	/*############################################################################################################################ */

		/*Register : L3_TM_ILL11 @ 0XFD40D98C</p>

		G2A_PCIe1 PLL ctr bypass value
		PSU_SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL                          0x2

		ill pll counter values
		(OFFSET, MASK, VALUE)      (0XFD40D98C, 0x000000F0U ,0x00000020U)  
		RegMask = (SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_MASK |  0 );

		RegVal = ((0x00000002U << SERDES_L3_TM_ILL11_G2A_PCIEG1_PLL_CTR_11_8_BYP_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_ILL11_OFFSET ,0x000000F0U ,0x00000020U);
	/*############################################################################################################################ */

		/*Register : L3_TM_IQ_ILL3 @ 0XFD40D900</p>

		IQ ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3
		PSU_SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2                               0x7D

		iqpi cal code
		(OFFSET, MASK, VALUE)      (0XFD40D900, 0x000000FFU ,0x0000007DU)  
		RegMask = (SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_MASK |  0 );

		RegVal = ((0x0000007DU << SERDES_L3_TM_IQ_ILL3_ILL_BYPASS_IQ_CALCODE_F2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_IQ_ILL3_OFFSET ,0x000000FFU ,0x0000007DU);
	/*############################################################################################################################ */

		/*Register : L3_TM_E_ILL3 @ 0XFD40D92C</p>

		E ILL F2CALCODE bypass value. MPHY : G2a, SATA : Gen3
		PSU_SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2                                 0x64

		epi cal code
		(OFFSET, MASK, VALUE)      (0XFD40D92C, 0x000000FFU ,0x00000064U)  
		RegMask = (SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_MASK |  0 );

		RegVal = ((0x00000064U << SERDES_L3_TM_E_ILL3_ILL_BYPASS_E_CALCODE_F2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_E_ILL3_OFFSET ,0x000000FFU ,0x00000064U);
	/*############################################################################################################################ */

		/*Register : L3_TM_ILL8 @ 0XFD40D980</p>

		ILL calibration code change wait time
		PSU_SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT                                         0xFF

		ILL cal routine control
		(OFFSET, MASK, VALUE)      (0XFD40D980, 0x000000FFU ,0x000000FFU)  
		RegMask = (SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_MASK |  0 );

		RegVal = ((0x000000FFU << SERDES_L3_TM_ILL8_ILL_CAL_ITER_WAIT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_ILL8_OFFSET ,0x000000FFU ,0x000000FFU);
	/*############################################################################################################################ */

		/*Register : L3_TM_IQ_ILL8 @ 0XFD40D914</p>

		IQ ILL polytrim bypass value
		PSU_SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL                             0xF7

		iqpi polytrim
		(OFFSET, MASK, VALUE)      (0XFD40D914, 0x000000FFU ,0x000000F7U)  
		RegMask = (SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_MASK |  0 );

		RegVal = ((0x000000F7U << SERDES_L3_TM_IQ_ILL8_ILL_BYPASS_IQ_POLYTRIM_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_IQ_ILL8_OFFSET ,0x000000FFU ,0x000000F7U);
	/*############################################################################################################################ */

		/*Register : L3_TM_IQ_ILL9 @ 0XFD40D918</p>

		bypass IQ polytrim
		PSU_SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM                                  0x1

		enables for lf,constant gm trim and polytirm
		(OFFSET, MASK, VALUE)      (0XFD40D918, 0x00000001U ,0x00000001U)  
		RegMask = (SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_IQ_ILL9_ILL_BYPASS_IQ_POLYTIM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_IQ_ILL9_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : L3_TM_E_ILL8 @ 0XFD40D940</p>

		E ILL polytrim bypass value
		PSU_SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL                               0xF7

		epi polytrim
		(OFFSET, MASK, VALUE)      (0XFD40D940, 0x000000FFU ,0x000000F7U)  
		RegMask = (SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_MASK |  0 );

		RegVal = ((0x000000F7U << SERDES_L3_TM_E_ILL8_ILL_BYPASS_E_POLYTRIM_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_E_ILL8_OFFSET ,0x000000FFU ,0x000000F7U);
	/*############################################################################################################################ */

		/*Register : L3_TM_E_ILL9 @ 0XFD40D944</p>

		bypass E polytrim
		PSU_SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM                                    0x1

		enables for lf,constant gm trim and polytirm
		(OFFSET, MASK, VALUE)      (0XFD40D944, 0x00000001U ,0x00000001U)  
		RegMask = (SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_E_ILL9_ILL_BYPASS_E_POLYTIM_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_E_ILL9_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		// : SYMBOL LOCK AND WAIT
		/*Register : L0_TM_DIG_21 @ 0XFD4010A8</p>

		pre lock comma count threshold. 2'b 00 : 3, 2'b 01 : 5, 2'b 10 : 10, 2'b 11 : 20
		PSU_SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH                                   0x11

		Control symbol alignment locking - wait counts
		(OFFSET, MASK, VALUE)      (0XFD4010A8, 0x00000003U ,0x00000003U)  
		RegMask = (SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_MASK |  0 );

		RegVal = ((0x00000011U << SERDES_L0_TM_DIG_21_COMMA_PRE_LOCK_THRESH_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_DIG_21_OFFSET ,0x00000003U ,0x00000003U);
	/*############################################################################################################################ */

		/*Register : L0_TM_DIG_10 @ 0XFD40107C</p>

		CDR lock wait time. (1-16 us). cdr_lock_wait_time = 4'b xxxx + 4'b 0001
		PSU_SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME                                       0xF

		test control for changing cdr lock wait time
		(OFFSET, MASK, VALUE)      (0XFD40107C, 0x0000000FU ,0x0000000FU)  
		RegMask = (SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_MASK |  0 );

		RegVal = ((0x0000000FU << SERDES_L0_TM_DIG_10_CDR_BIT_LOCK_TIME_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_DIG_10_OFFSET ,0x0000000FU ,0x0000000FU);
	/*############################################################################################################################ */

		// : SIOU SETTINGS FOR BYPASS CONTROL,HSRX-DIG
		/*Register : L0_TM_RST_DLY @ 0XFD4019A4</p>

		Delay apb reset by specified amount
		PSU_SERDES_L0_TM_RST_DLY_APB_RST_DLY                                            0xFF

		reset delay for apb reset w.r.t pso of hsrx
		(OFFSET, MASK, VALUE)      (0XFD4019A4, 0x000000FFU ,0x000000FFU)  
		RegMask = (SERDES_L0_TM_RST_DLY_APB_RST_DLY_MASK |  0 );

		RegVal = ((0x000000FFU << SERDES_L0_TM_RST_DLY_APB_RST_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU);
	/*############################################################################################################################ */

		/*Register : L0_TM_ANA_BYP_15 @ 0XFD401038</p>

		Enable Bypass for <7> of TM_ANA_BYPS_15
		PSU_SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE                       0x1

		Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c
		(OFFSET, MASK, VALUE)      (0XFD401038, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : L0_TM_ANA_BYP_12 @ 0XFD40102C</p>

		Enable Bypass for <7> of TM_ANA_BYPS_12
		PSU_SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG                              0x1

		Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls
		(OFFSET, MASK, VALUE)      (0XFD40102C, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L0_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L0_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : L1_TM_RST_DLY @ 0XFD4059A4</p>

		Delay apb reset by specified amount
		PSU_SERDES_L1_TM_RST_DLY_APB_RST_DLY                                            0xFF

		reset delay for apb reset w.r.t pso of hsrx
		(OFFSET, MASK, VALUE)      (0XFD4059A4, 0x000000FFU ,0x000000FFU)  
		RegMask = (SERDES_L1_TM_RST_DLY_APB_RST_DLY_MASK |  0 );

		RegVal = ((0x000000FFU << SERDES_L1_TM_RST_DLY_APB_RST_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU);
	/*############################################################################################################################ */

		/*Register : L1_TM_ANA_BYP_15 @ 0XFD405038</p>

		Enable Bypass for <7> of TM_ANA_BYPS_15
		PSU_SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE                       0x1

		Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c
		(OFFSET, MASK, VALUE)      (0XFD405038, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L1_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : L1_TM_ANA_BYP_12 @ 0XFD40502C</p>

		Enable Bypass for <7> of TM_ANA_BYPS_12
		PSU_SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG                              0x1

		Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls
		(OFFSET, MASK, VALUE)      (0XFD40502C, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L1_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : L2_TM_RST_DLY @ 0XFD4099A4</p>

		Delay apb reset by specified amount
		PSU_SERDES_L2_TM_RST_DLY_APB_RST_DLY                                            0xFF

		reset delay for apb reset w.r.t pso of hsrx
		(OFFSET, MASK, VALUE)      (0XFD4099A4, 0x000000FFU ,0x000000FFU)  
		RegMask = (SERDES_L2_TM_RST_DLY_APB_RST_DLY_MASK |  0 );

		RegVal = ((0x000000FFU << SERDES_L2_TM_RST_DLY_APB_RST_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU);
	/*############################################################################################################################ */

		/*Register : L2_TM_ANA_BYP_15 @ 0XFD409038</p>

		Enable Bypass for <7> of TM_ANA_BYPS_15
		PSU_SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE                       0x1

		Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c
		(OFFSET, MASK, VALUE)      (0XFD409038, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : L2_TM_ANA_BYP_12 @ 0XFD40902C</p>

		Enable Bypass for <7> of TM_ANA_BYPS_12
		PSU_SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG                              0x1

		Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls
		(OFFSET, MASK, VALUE)      (0XFD40902C, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L2_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L2_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : L3_TM_RST_DLY @ 0XFD40D9A4</p>

		Delay apb reset by specified amount
		PSU_SERDES_L3_TM_RST_DLY_APB_RST_DLY                                            0xFF

		reset delay for apb reset w.r.t pso of hsrx
		(OFFSET, MASK, VALUE)      (0XFD40D9A4, 0x000000FFU ,0x000000FFU)  
		RegMask = (SERDES_L3_TM_RST_DLY_APB_RST_DLY_MASK |  0 );

		RegVal = ((0x000000FFU << SERDES_L3_TM_RST_DLY_APB_RST_DLY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_RST_DLY_OFFSET ,0x000000FFU ,0x000000FFU);
	/*############################################################################################################################ */

		/*Register : L3_TM_ANA_BYP_15 @ 0XFD40D038</p>

		Enable Bypass for <7> of TM_ANA_BYPS_15
		PSU_SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE                       0x1

		Bypass control for pcs-pma interface. EQ supplies, main master supply and ps for samp c2c
		(OFFSET, MASK, VALUE)      (0XFD40D038, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_ANA_BYP_15_FORCE_UPHY_ENABLE_LOW_LEAKAGE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_ANA_BYP_15_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : L3_TM_ANA_BYP_12 @ 0XFD40D02C</p>

		Enable Bypass for <7> of TM_ANA_BYPS_12
		PSU_SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG                              0x1

		Bypass control for pcs-pma interface. Hsrx supply, hsrx des, and cdr enable controls
		(OFFSET, MASK, VALUE)      (0XFD40D02C, 0x00000040U ,0x00000040U)  
		RegMask = (SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_ANA_BYP_12_FORCE_UPHY_PSO_HSRXDIG_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_ANA_BYP_12_OFFSET ,0x00000040U ,0x00000040U);
	/*############################################################################################################################ */

		// : GT LANE SETTINGS
		/*Register : ICM_CFG0 @ 0XFD410010</p>

		Controls UPHY Lane 0 protocol configuration. 0 - PowerDown, 1 - PCIe .0, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII0, 6 - Unuse
		, 7 - Unused
		PSU_SERDES_ICM_CFG0_L0_ICM_CFG                                                  1

		Controls UPHY Lane 1 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata1, 3 - USB0, 4 - DP.0, 5 - SGMII1, 6 - Unused
		 7 - Unused
		PSU_SERDES_ICM_CFG0_L1_ICM_CFG                                                  4

		ICM Configuration Register 0
		(OFFSET, MASK, VALUE)      (0XFD410010, 0x00000077U ,0x00000041U)  
		RegMask = (SERDES_ICM_CFG0_L0_ICM_CFG_MASK | SERDES_ICM_CFG0_L1_ICM_CFG_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_ICM_CFG0_L0_ICM_CFG_SHIFT
			| 0x00000004U << SERDES_ICM_CFG0_L1_ICM_CFG_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_ICM_CFG0_OFFSET ,0x00000077U ,0x00000041U);
	/*############################################################################################################################ */

		/*Register : ICM_CFG1 @ 0XFD410014</p>

		Controls UPHY Lane 2 protocol configuration. 0 - PowerDown, 1 - PCIe.1, 2 - Sata0, 3 - USB0, 4 - DP.1, 5 - SGMII2, 6 - Unused
		 7 - Unused
		PSU_SERDES_ICM_CFG1_L2_ICM_CFG                                                  3

		Controls UPHY Lane 3 protocol configuration. 0 - PowerDown, 1 - PCIe.3, 2 - Sata1, 3 - USB1, 4 - DP.0, 5 - SGMII3, 6 - Unused
		 7 - Unused
		PSU_SERDES_ICM_CFG1_L3_ICM_CFG                                                  2

		ICM Configuration Register 1
		(OFFSET, MASK, VALUE)      (0XFD410014, 0x00000077U ,0x00000023U)  
		RegMask = (SERDES_ICM_CFG1_L2_ICM_CFG_MASK | SERDES_ICM_CFG1_L3_ICM_CFG_MASK |  0 );

		RegVal = ((0x00000003U << SERDES_ICM_CFG1_L2_ICM_CFG_SHIFT
			| 0x00000002U << SERDES_ICM_CFG1_L3_ICM_CFG_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_ICM_CFG1_OFFSET ,0x00000077U ,0x00000023U);
	/*############################################################################################################################ */

		// : CHECKING PLL LOCK
		// : ENABLE SERIAL DATA MUX DEEMPH
		/*Register : L1_TXPMD_TM_45 @ 0XFD404CB4</p>

		Enable/disable DP post2 path
		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH                         0x1

		Override enable/disable of DP post2 path
		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH                    0x1

		Override enable/disable of DP post1 path
		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH                    0x1

		Enable/disable DP main path
		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH                          0x1

		Override enable/disable of DP main path
		PSU_SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH                     0x1

		Post or pre or main DP path selection
		(OFFSET, MASK, VALUE)      (0XFD404CB4, 0x00000037U ,0x00000037U)  
		RegMask = (SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_MASK | SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_POST2_PATH_SHIFT
			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST2_PATH_SHIFT
			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_POST1_PATH_SHIFT
			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_DP_ENABLE_MAIN_PATH_SHIFT
			| 0x00000001U << SERDES_L1_TXPMD_TM_45_DP_TM_TX_OVRD_DP_ENABLE_MAIN_PATH_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_TXPMD_TM_45_OFFSET ,0x00000037U ,0x00000037U);
	/*############################################################################################################################ */

		/*Register : L1_TX_ANA_TM_118 @ 0XFD4041D8</p>

		Test register force for enabling/disablign TX deemphasis bits <17:0>
		PSU_SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0                                0x1

		Enable Override of TX deemphasis
		(OFFSET, MASK, VALUE)      (0XFD4041D8, 0x00000001U ,0x00000001U)  
		RegMask = (SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L1_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : L3_TX_ANA_TM_118 @ 0XFD40C1D8</p>

		Test register force for enabling/disablign TX deemphasis bits <17:0>
		PSU_SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0                                0x1

		Enable Override of TX deemphasis
		(OFFSET, MASK, VALUE)      (0XFD40C1D8, 0x00000001U ,0x00000001U)  
		RegMask = (SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TX_ANA_TM_118_FORCE_TX_DEEMPH_17_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TX_ANA_TM_118_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		// : CDR AND RX EQUALIZATION SETTINGS
		/*Register : L3_TM_CDR5 @ 0XFD40DC14</p>

		FPHL FSM accumulate cycles
		PSU_SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES                                       0x7

		FFL Phase0 int gain aka 2ol SD update rate
		PSU_SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN                                          0x6

		Fast phase lock controls -- FSM accumulator cycle control and phase 0 int gain control.
		(OFFSET, MASK, VALUE)      (0XFD40DC14, 0x000000FFU ,0x000000E6U)  
		RegMask = (SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_MASK | SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_MASK |  0 );

		RegVal = ((0x00000007U << SERDES_L3_TM_CDR5_FPHL_FSM_ACC_CYCLES_SHIFT
			| 0x00000006U << SERDES_L3_TM_CDR5_FFL_PH0_INT_GAIN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_CDR5_OFFSET ,0x000000FFU ,0x000000E6U);
	/*############################################################################################################################ */

		/*Register : L3_TM_CDR16 @ 0XFD40DC40</p>

		FFL Phase0 prop gain aka 1ol SD update rate
		PSU_SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN                                        0xC

		Fast phase lock controls -- phase 0 prop gain
		(OFFSET, MASK, VALUE)      (0XFD40DC40, 0x0000001FU ,0x0000000CU)  
		RegMask = (SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_MASK |  0 );

		RegVal = ((0x0000000CU << SERDES_L3_TM_CDR16_FFL_PH0_PROP_GAIN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_CDR16_OFFSET ,0x0000001FU ,0x0000000CU);
	/*############################################################################################################################ */

		/*Register : L3_TM_EQ0 @ 0XFD40D94C</p>

		EQ stg 2 controls BYPASSED
		PSU_SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP                                           1

		eq stg1 and stg2 controls
		(OFFSET, MASK, VALUE)      (0XFD40D94C, 0x00000020U ,0x00000020U)  
		RegMask = (SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TM_EQ0_EQ_STG2_CTRL_BYP_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_EQ0_OFFSET ,0x00000020U ,0x00000020U);
	/*############################################################################################################################ */

		/*Register : L3_TM_EQ1 @ 0XFD40D950</p>

		EQ STG2 RL PROG
		PSU_SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG                                            0x2

		EQ stg 2 preamp mode val
		PSU_SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL                                    0x1

		eq stg1 and stg2 controls
		(OFFSET, MASK, VALUE)      (0XFD40D950, 0x00000007U ,0x00000006U)  
		RegMask = (SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_MASK | SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_MASK |  0 );

		RegVal = ((0x00000002U << SERDES_L3_TM_EQ1_EQ_STG2_RL_PROG_SHIFT
			| 0x00000001U << SERDES_L3_TM_EQ1_EQ_STG2_PREAMP_MODE_VAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TM_EQ1_OFFSET ,0x00000007U ,0x00000006U);
	/*############################################################################################################################ */

		// : GEM SERDES SETTINGS
		// : ENABLE PRE EMPHAIS AND VOLTAGE SWING
		/*Register : L1_TXPMD_TM_48 @ 0XFD404CC0</p>

		Margining factor value
		PSU_SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR                         0

		Margining factor
		(OFFSET, MASK, VALUE)      (0XFD404CC0, 0x0000001FU ,0x00000000U)  
		RegMask = (SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L1_TXPMD_TM_48_TM_RESULTANT_MARGINING_FACTOR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_TXPMD_TM_48_OFFSET ,0x0000001FU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : L1_TX_ANA_TM_18 @ 0XFD404048</p>

		pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved
		PSU_SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0                                   0

		Override for PIPE TX de-emphasis
		(OFFSET, MASK, VALUE)      (0XFD404048, 0x000000FFU ,0x00000000U)  
		RegMask = (SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK |  0 );

		RegVal = ((0x00000000U << SERDES_L1_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L1_TX_ANA_TM_18_OFFSET ,0x000000FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : L3_TX_ANA_TM_18 @ 0XFD40C048</p>

		pipe_TX_Deemph. 0: -6dB de-emphasis, 1: -3.5dB de-emphasis, 2 : No de-emphasis, Others: reserved
		PSU_SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0                                   0x1

		Override for PIPE TX de-emphasis
		(OFFSET, MASK, VALUE)      (0XFD40C048, 0x000000FFU ,0x00000001U)  
		RegMask = (SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_MASK |  0 );

		RegVal = ((0x00000001U << SERDES_L3_TX_ANA_TM_18_PIPE_TX_DEEMPH_7_0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SERDES_L3_TX_ANA_TM_18_OFFSET ,0x000000FFU ,0x00000001U);
	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_resetout_init_data() {
		// : TAKING SERDES PERIPHERAL OUT OF RESET RESET
		// : PUTTING USB0 IN RESET
		/*Register : RST_LPD_TOP @ 0XFF5E023C</p>

		USB 0 reset for control registers
		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0X0

		Software control register for the LPD block.
		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000400U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000400U ,0x00000000U);
	/*############################################################################################################################ */

		// : USB0 PIPE POWER PRESENT
		/*Register : fpd_power_prsnt @ 0XFF9D0080</p>

		This bit is used to choose between PIPE power present and 1'b1
		PSU_USB3_0_FPD_POWER_PRSNT_OPTION                                               0X1

		fpd_power_prsnt
		(OFFSET, MASK, VALUE)      (0XFF9D0080, 0x00000001U ,0x00000001U)  
		RegMask = (USB3_0_FPD_POWER_PRSNT_OPTION_MASK |  0 );

		RegVal = ((0x00000001U << USB3_0_FPD_POWER_PRSNT_OPTION_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (USB3_0_FPD_POWER_PRSNT_OFFSET ,0x00000001U ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : fpd_pipe_clk @ 0XFF9D007C</p>

		This bit is used to choose between PIPE clock coming from SerDes and the suspend clk
		PSU_USB3_0_FPD_PIPE_CLK_OPTION                                                  0x0

		fpd_pipe_clk
		(OFFSET, MASK, VALUE)      (0XFF9D007C, 0x00000001U ,0x00000000U)  
		RegMask = (USB3_0_FPD_PIPE_CLK_OPTION_MASK |  0 );

		RegVal = ((0x00000000U << USB3_0_FPD_PIPE_CLK_OPTION_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (USB3_0_FPD_PIPE_CLK_OFFSET ,0x00000001U ,0x00000000U);
	/*############################################################################################################################ */

		// : 
		/*Register : RST_LPD_TOP @ 0XFF5E023C</p>

		USB 0 sleep circuit reset
		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0X0

		USB 0 reset
		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0X0

		Software control register for the LPD block.
		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000140U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
			| 0x00000000U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000140U ,0x00000000U);
	/*############################################################################################################################ */

		// : PUTTING GEM0 IN RESET
		/*Register : RST_LPD_IOU0 @ 0XFF5E0230</p>

		GEM 3 reset
		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0X0

		Software controlled reset for the GEMs
		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000000U)  
		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000000U);
	/*############################################################################################################################ */

		// : PUTTING SATA IN RESET
		/*Register : sata_misc_ctrl @ 0XFD3D0100</p>

		Sata PM clock control select
		PSU_SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL                                         0x3

		Misc Contorls for SATA.This register may only be modified during bootup (while SATA block is disabled)
		(OFFSET, MASK, VALUE)      (0XFD3D0100, 0x00000003U ,0x00000003U)  
		RegMask = (SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_MASK |  0 );

		RegVal = ((0x00000003U << SIOU_SATA_MISC_CTRL_SATA_PM_CLK_SEL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SIOU_SATA_MISC_CTRL_OFFSET ,0x00000003U ,0x00000003U);
	/*############################################################################################################################ */

		/*Register : RST_FPD_TOP @ 0XFD1A0100</p>

		Sata block level reset
		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0X0

		FPD Block level software controlled reset
		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00000002U ,0x00000000U)  
		RegMask = (CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00000002U ,0x00000000U);
	/*############################################################################################################################ */

		// : PUTTING PCIE CFG AND BRIDGE IN RESET
		/*Register : RST_FPD_TOP @ 0XFD1A0100</p>

		PCIE config reset
		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0X0

		PCIE bridge block level reset (AXI interface)
		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0X0

		FPD Block level software controlled reset
		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000C0000U ,0x00000000U)  
		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
			| 0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000C0000U ,0x00000000U);
	/*############################################################################################################################ */

		// : PUTTING DP IN RESET
		/*Register : RST_FPD_TOP @ 0XFD1A0100</p>

		Display Port block level reset (includes DPDMA)
		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0X0

		FPD Block level software controlled reset
		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00010000U ,0x00000000U)  
		RegMask = (CRF_APB_RST_FPD_TOP_DP_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00010000U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DP_PHY_RESET @ 0XFD4A0200</p>

		Set to '1' to hold the GT in reset. Clear to release.
		PSU_DP_DP_PHY_RESET_GT_RESET                                                    0X0

		Reset the transmitter PHY.
		(OFFSET, MASK, VALUE)      (0XFD4A0200, 0x00000002U ,0x00000000U)  
		RegMask = (DP_DP_PHY_RESET_GT_RESET_MASK |  0 );

		RegVal = ((0x00000000U << DP_DP_PHY_RESET_GT_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DP_DP_PHY_RESET_OFFSET ,0x00000002U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : DP_TX_PHY_POWER_DOWN @ 0XFD4A0238</p>

		Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
		ane0 Bits [3:2] - lane 1
		PSU_DP_DP_TX_PHY_POWER_DOWN_POWER_DWN                                           0X0

		Control PHY Power down
		(OFFSET, MASK, VALUE)      (0XFD4A0238, 0x0000000FU ,0x00000000U)  
		RegMask = (DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK |  0 );

		RegVal = ((0x00000000U << DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DP_DP_TX_PHY_POWER_DOWN_OFFSET ,0x0000000FU ,0x00000000U);
	/*############################################################################################################################ */

		// : USB0 GFLADJ
		/*Register : GUSB2PHYCFG @ 0XFE20C200</p>

		USB 2.0 Turnaround Time (USBTrdTim) Sets the turnaround time in PHY clocks. Specifies the response time for a MAC request to 
		he Packet FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). The following are the required values for the minimum S
		C bus frequency of 60 MHz. USB turnaround time is a critical certification criteria when using long cables and five hub level
		. The required values for this field: - 4'h5: When the MAC interface is 16-bit UTMI+. - 4'h9: When the MAC interface is 8-bit
		UTMI+/ULPI. If SoC bus clock is less than 60 MHz, and USB turnaround time is not critical, this field can be set to a larger 
		alue. Note: This field is valid only in device mode.
		PSU_USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM                                           0x9

		Transceiver Delay: Enables a delay between the assertion of the UTMI/ULPI Transceiver Select signal (for HS) and the assertio
		 of the TxValid signal during a HS Chirp. When this bit is set to 1, a delay (of approximately 2.5 us) is introduced from the
		time when the Transceiver Select is set to 2'b00 (HS) to the time the TxValid is driven to 0 for sending the chirp-K. This de
		ay is required for some UTMI/ULPI PHYs. Note: - If you enable the hibernation feature when the device core comes out of power
		off, you must re-initialize this bit with the appropriate value because the core does not save and restore this bit value dur
		ng hibernation. - This bit is valid only in device mode.
		PSU_USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY                                             0x0

		Enable utmi_sleep_n and utmi_l1_suspend_n (EnblSlpM) The application uses this bit to control utmi_sleep_n and utmi_l1_suspen
		_n assertion to the PHY in the L1 state. - 1'b0: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferre
		 to the external PHY. - 1'b1: utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the external PHY. 
		ote: This bit must be set high for Port0 if PHY is used. Note: In Device mode - Before issuing any device endpoint command wh
		n operating in 2.0 speeds, disable this bit and enable it after the command completes. Without disabling this bit, if a comma
		d is issued when the device is in L1 state and if mac2_clk (utmi_clk/ulpi_clk) is gated off, the command will not get complet
		d.
		PSU_USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM                                            0x0

		USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial Transceiver Select The application uses this bit to select a high-speed P
		Y or a full-speed transceiver. - 1'b0: USB 2.0 high-speed UTMI+ or ULPI PHY. This bit is always 0, with Write Only access. - 
		'b1: USB 1.1 full-speed serial transceiver. This bit is always 1, with Write Only access. If both interface types are selecte
		 in coreConsultant (that is, parameters' values are not zero), the application uses this bit to select the active interface i
		 active, with Read-Write bit access. Note: USB 1.1 full-serial transceiver is not supported. This bit always reads as 1'b0.
		PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYSEL                                              0x0

		Full-Speed Serial Interface Select (FSIntf) The application uses this bit to select a unidirectional or bidirectional USB 1.1
		full-speed serial transceiver interface. - 1'b0: 6-pin unidirectional full-speed serial interface. This bit is set to 0 with 
		ead Only access. - 1'b1: 3-pin bidirectional full-speed serial interface. This bit is set to 0 with Read Only access. Note: U
		B 1.1 full-speed serial interface is not supported. This bit always reads as 1'b0.
		PSU_USB3_0_XHCI_GUSB2PHYCFG_FSINTF                                              0x0

		ULPI or UTMI+ Select (ULPI_UTMI_Sel) The application uses this bit to select a UTMI+ or ULPI Interface. - 1'b0: UTMI+ Interfa
		e - 1'b1: ULPI Interface This bit is writable only if UTMI+ and ULPI is specified for High-Speed PHY Interface(s) in coreCons
		ltant configuration (DWC_USB3_HSPHY_INTERFACE = 3). Otherwise, this bit is read-only and the value depends on the interface s
		lected through DWC_USB3_HSPHY_INTERFACE.
		PSU_USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL                                       0x1

		PHY Interface (PHYIf) If UTMI+ is selected, the application uses this bit to configure the core to support a UTMI+ PHY with a
		 8- or 16-bit interface. - 1'b0: 8 bits - 1'b1: 16 bits ULPI Mode: 1'b0 Note: - All the enabled 2.0 ports must have the same 
		lock frequency as Port0 clock frequency (utmi_clk[0]). - The UTMI 8-bit and 16-bit modes cannot be used together for differen
		 ports at the same time (that is, all the ports must be in 8-bit mode, or all of them must be in 16-bit mode, at a time). - I
		 any of the USB 2.0 ports is selected as ULPI port for operation, then all the USB 2.0 ports must be operating at 60 MHz.
		PSU_USB3_0_XHCI_GUSB2PHYCFG_PHYIF                                               0x0

		HS/FS Timeout Calibration (TOutCal) The number of PHY clocks, as indicated by the application in this field, is multiplied by
		a bit-time factor; this factor is added to the high-speed/full-speed interpacket timeout duration in the core to account for 
		dditional delays introduced by the PHY. This may be required, since the delay introduced by the PHY in generating the linesta
		e condition may vary among PHYs. The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times.
		The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit times. The application must program this 
		ield based on the speed of connection. The number of bit times added per PHY clock are: High-speed operation: - One 30-MHz PH
		 clock = 16 bit times - One 60-MHz PHY clock = 8 bit times Full-speed operation: - One 30-MHz PHY clock = 0.4 bit times - One
		60-MHz PHY clock = 0.2 bit times - One 48-MHz PHY clock = 0.25 bit times
		PSU_USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL                                             0x7

		Global USB2 PHY Configuration Register The application must program this register before starting any transactions on either 
		he SoC bus or the USB. In Device-only configurations, only one register is needed. In Host mode, per-port registers are imple
		ented.
		(OFFSET, MASK, VALUE)      (0XFE20C200, 0x00003FBFU ,0x00002417U)  
		RegMask = (USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_MASK | USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_MASK | USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_FSINTF_MASK | USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_MASK | USB3_0_XHCI_GUSB2PHYCFG_PHYIF_MASK | USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_MASK |  0 );

		RegVal = ((0x00000009U << USB3_0_XHCI_GUSB2PHYCFG_USBTRDTIM_SHIFT
			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_XCVRDLY_SHIFT
			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_ENBLSLPM_SHIFT
			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYSEL_SHIFT
			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_FSINTF_SHIFT
			| 0x00000001U << USB3_0_XHCI_GUSB2PHYCFG_ULPI_UTMI_SEL_SHIFT
			| 0x00000000U << USB3_0_XHCI_GUSB2PHYCFG_PHYIF_SHIFT
			| 0x00000007U << USB3_0_XHCI_GUSB2PHYCFG_TOUTCAL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (USB3_0_XHCI_GUSB2PHYCFG_OFFSET ,0x00003FBFU ,0x00002417U);
	/*############################################################################################################################ */

		/*Register : GFLADJ @ 0XFE20C630</p>

		This field indicates the frame length adjustment to be applied when SOF/ITP counter is running on the ref_clk. This register 
		alue is used to adjust the ITP interval when GCTL[SOFITPSYNC] is set to '1'; SOF and ITP interval when GLADJ.GFLADJ_REFCLK_LP
		_SEL is set to '1'. This field must be programmed to a non-zero value only if GFLADJ_REFCLK_LPM_SEL is set to '1' or GCTL.SOF
		TPSYNC is set to '1'. The value is derived as follows: FLADJ_REF_CLK_FLADJ=((125000/ref_clk_period_integer)-(125000/ref_clk_p
		riod)) * ref_clk_period where - the ref_clk_period_integer is the integer value of the ref_clk period got by truncating the d
		cimal (fractional) value that is programmed in the GUCTL.REF_CLK_PERIOD field. - the ref_clk_period is the ref_clk period inc
		uding the fractional value. Examples: If the ref_clk is 24 MHz then - GUCTL.REF_CLK_PERIOD = 41 - GFLADJ.GLADJ_REFCLK_FLADJ =
		((125000/41)-(125000/41.6666))*41.6666 = 2032 (ignoring the fractional value) If the ref_clk is 48 MHz then - GUCTL.REF_CLK_P
		RIOD = 20 - GFLADJ.GLADJ_REFCLK_FLADJ = ((125000/20)-(125000/20.8333))*20.8333 = 5208 (ignoring the fractional value)
		PSU_USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ                                      0x0

		Global Frame Length Adjustment Register This register provides options for the software to control the core behavior with res
		ect to SOF (Start of Frame) and ITP (Isochronous Timestamp Packet) timers and frame timer functionality. It provides an optio
		 to override the fladj_30mhz_reg sideband signal. In addition, it enables running SOF or ITP frame timer counters completely 
		rom the ref_clk. This facilitates hardware LPM in host mode with the SOF or ITP counters being run from the ref_clk signal.
		(OFFSET, MASK, VALUE)      (0XFE20C630, 0x003FFF00U ,0x00000000U)  
		RegMask = (USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_MASK |  0 );

		RegVal = ((0x00000000U << USB3_0_XHCI_GFLADJ_GFLADJ_REFCLK_FLADJ_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (USB3_0_XHCI_GFLADJ_OFFSET ,0x003FFF00U ,0x00000000U);
	/*############################################################################################################################ */

		// : UPDATING TWO PCIE REGISTERS DEFAULT VALUES, AS THESE REGISTERS HAVE INCORRECT RESET VALUES IN SILICON.
		/*Register : ATTR_25 @ 0XFD480064</p>

		If TRUE Completion Timeout Disable is supported. This is required to be TRUE for Endpoint and either setting allowed for Root
		ports. Drives Device Capability 2 [4]; EP=0x0001; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED                      0X1

		ATTR_25
		(OFFSET, MASK, VALUE)      (0XFD480064, 0x00000200U ,0x00000200U)  
		RegMask = (PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_MASK |  0 );

		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_25_ATTR_CPL_TIMEOUT_DISABLE_SUPPORTED_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_25_OFFSET ,0x00000200U ,0x00000200U);
	/*############################################################################################################################ */

		// : PCIE SETTINGS
		/*Register : ATTR_7 @ 0XFD48001C</p>

		Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
		re size in bytes.; EP=0x0004; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_7_ATTR_BAR0                                                0x0

		ATTR_7
		(OFFSET, MASK, VALUE)      (0XFD48001C, 0x0000FFFFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_7_ATTR_BAR0_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_7_ATTR_BAR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_7_OFFSET ,0x0000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_8 @ 0XFD480020</p>

		Specifies mask/settings for Base Address Register (BAR) 0. If BAR is not to be implemented, set to 32'h00000000. Bits are def
		ned as follows: Memory Space BAR [0] = Mem Space Indicator (set to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] =
		Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory a
		erture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR1,BAR0\'7d to 1. IO Space BAR 0] = IO Space Indicator 
		set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o apert
		re size in bytes.; EP=0xFFF0; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_8_ATTR_BAR0                                                0x0

		ATTR_8
		(OFFSET, MASK, VALUE)      (0XFD480020, 0x0000FFFFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_8_ATTR_BAR0_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_8_ATTR_BAR0_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_8_OFFSET ,0x0000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_9 @ 0XFD480024</p>

		Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_9_ATTR_BAR1                                                0x0

		ATTR_9
		(OFFSET, MASK, VALUE)      (0XFD480024, 0x0000FFFFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_9_ATTR_BAR1_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_9_ATTR_BAR1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_9_OFFSET ,0x0000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_10 @ 0XFD480028</p>

		Specifies mask/settings for Base Address Register (BAR) 1 if BAR0 is a 32-bit BAR, or the upper bits of \'7bBAR1,BAR0\'7d if 
		AR0 is a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR0 description if this functions as the uppe
		 bits of a 64-bit BAR. Bits are defined as follows: Memory Space BAR (not upper bits of BAR0) [0] = Mem Space Indicator (set 
		o 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if
		32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of 
		'7bBAR2,BAR1\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable b
		ts of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_10_ATTR_BAR1                                               0x0

		ATTR_10
		(OFFSET, MASK, VALUE)      (0XFD480028, 0x0000FFFFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_10_ATTR_BAR1_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_10_ATTR_BAR1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_10_OFFSET ,0x0000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_11 @ 0XFD48002C</p>

		For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFFF
		PSU_PCIE_ATTRIB_ATTR_11_ATTR_BAR2                                               0xFFFF

		ATTR_11
		(OFFSET, MASK, VALUE)      (0XFD48002C, 0x0000FFFFU ,0x0000FFFFU)  
		RegMask = (PCIE_ATTRIB_ATTR_11_ATTR_BAR2_MASK |  0 );

		RegVal = ((0x0000FFFFU << PCIE_ATTRIB_ATTR_11_ATTR_BAR2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_11_OFFSET ,0x0000FFFFU ,0x0000FFFFU);
	/*############################################################################################################################ */

		/*Register : ATTR_12 @ 0XFD480030</p>

		For an endpoint, specifies mask/settings for Base Address Register (BAR) 2 if BAR1 is a 32-bit BAR, or the upper bits of \'7b
		AR2,BAR1\'7d if BAR1 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR1 descri
		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to 00FF_FFFF. For an endpoin
		, bits are defined as follows: Memory Space BAR (not upper bits of BAR1) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR3,BAR2\'7d to 
		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0x00FF
		PSU_PCIE_ATTRIB_ATTR_12_ATTR_BAR2                                               0xFF

		ATTR_12
		(OFFSET, MASK, VALUE)      (0XFD480030, 0x0000FFFFU ,0x000000FFU)  
		RegMask = (PCIE_ATTRIB_ATTR_12_ATTR_BAR2_MASK |  0 );

		RegVal = ((0x000000FFU << PCIE_ATTRIB_ATTR_12_ATTR_BAR2_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_12_OFFSET ,0x0000FFFFU ,0x000000FFU);
	/*############################################################################################################################ */

		/*Register : ATTR_13 @ 0XFD480034</p>

		For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_13_ATTR_BAR3                                               0x0

		ATTR_13
		(OFFSET, MASK, VALUE)      (0XFD480034, 0x0000FFFFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_13_ATTR_BAR3_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_13_ATTR_BAR3_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_13_OFFSET ,0x0000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_14 @ 0XFD480038</p>

		For an endpoint, specifies mask/settings for Base Address Register (BAR) 3 if BAR2 is a 32-bit BAR, or the upper bits of \'7b
		AR3,BAR2\'7d if BAR2 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR2 descri
		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: FFFF_0000 = IO Limit/Bas
		 Registers not implemented FFFF_F0F0 = IO Limit/Base Registers use 16-bit decode FFFF_F1F1 = IO Limit/Base Registers use 32-b
		t decode For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of BAR2) [0] = Mem Space Indicator (s
		t to 0) [2:1] = Type field (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR;
		if 32-bit BAR, set uppermost 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits 
		f \'7bBAR4,BAR3\'7d to 1. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writabl
		 bits of BAR; set uppermost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFFF
		PSU_PCIE_ATTRIB_ATTR_14_ATTR_BAR3                                               0xFFFF

		ATTR_14
		(OFFSET, MASK, VALUE)      (0XFD480038, 0x0000FFFFU ,0x0000FFFFU)  
		RegMask = (PCIE_ATTRIB_ATTR_14_ATTR_BAR3_MASK |  0 );

		RegVal = ((0x0000FFFFU << PCIE_ATTRIB_ATTR_14_ATTR_BAR3_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_14_OFFSET ,0x0000FFFFU ,0x0000FFFFU);
	/*############################################################################################################################ */

		/*Register : ATTR_15 @ 0XFD48003C</p>

		For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0x0004; RP=0xFFF0
		PSU_PCIE_ATTRIB_ATTR_15_ATTR_BAR4                                               0xFFF0

		ATTR_15
		(OFFSET, MASK, VALUE)      (0XFD48003C, 0x0000FFFFU ,0x0000FFF0U)  
		RegMask = (PCIE_ATTRIB_ATTR_15_ATTR_BAR4_MASK |  0 );

		RegVal = ((0x0000FFF0U << PCIE_ATTRIB_ATTR_15_ATTR_BAR4_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_15_OFFSET ,0x0000FFFFU ,0x0000FFF0U);
	/*############################################################################################################################ */

		/*Register : ATTR_16 @ 0XFD480040</p>

		For an endpoint, specifies mask/settings for Base Address Register (BAR) 4 if BAR3 is a 32-bit BAR, or the upper bits of \'7b
		AR4,BAR3\'7d if BAR3 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR3 descri
		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root: This must be set to FFF0_FFF0. For an endpoin
		, bits are defined as follows: Memory Space BAR (not upper bits of BAR3) [0] = Mem Space Indicator (set to 0) [2:1] = Type fi
		ld (10 for 64-bit, 00 for 32-bit) [3] = Prefetchable (0 or 1) [31:4] = Mask for writable bits of BAR; if 32-bit BAR, set uppe
		most 31:n bits to 1, where 2^n=memory aperture size in bytes. If 64-bit BAR, set uppermost 63:n bits of \'7bBAR5,BAR4\'7d to 
		. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set upper
		ost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFF0; RP=0xFFF0
		PSU_PCIE_ATTRIB_ATTR_16_ATTR_BAR4                                               0xFFF0

		ATTR_16
		(OFFSET, MASK, VALUE)      (0XFD480040, 0x0000FFFFU ,0x0000FFF0U)  
		RegMask = (PCIE_ATTRIB_ATTR_16_ATTR_BAR4_MASK |  0 );

		RegVal = ((0x0000FFF0U << PCIE_ATTRIB_ATTR_16_ATTR_BAR4_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_16_OFFSET ,0x0000FFFFU ,0x0000FFF0U);
	/*############################################################################################################################ */

		/*Register : ATTR_17 @ 0XFD480044</p>

		For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1
		PSU_PCIE_ATTRIB_ATTR_17_ATTR_BAR5                                               0xFFF1

		ATTR_17
		(OFFSET, MASK, VALUE)      (0XFD480044, 0x0000FFFFU ,0x0000FFF1U)  
		RegMask = (PCIE_ATTRIB_ATTR_17_ATTR_BAR5_MASK |  0 );

		RegVal = ((0x0000FFF1U << PCIE_ATTRIB_ATTR_17_ATTR_BAR5_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_17_OFFSET ,0x0000FFFFU ,0x0000FFF1U);
	/*############################################################################################################################ */

		/*Register : ATTR_18 @ 0XFD480048</p>

		For an endpoint, specifies mask/settings for Base Address Register (BAR) 5 if BAR4 is a 32-bit BAR, or the upper bits of \'7b
		AR5,BAR4\'7d if BAR4 is the lower part of a 64-bit BAR. If BAR is not to be implemented, set to 32'h00000000. See BAR4 descri
		tion if this functions as the upper bits of a 64-bit BAR. For a switch or root, this must be set to: 0000_0000 = Prefetchable
		Memory Limit/Base Registers not implemented FFF0_FFF0 = 32-bit Prefetchable Memory Limit/Base implemented FFF1_FFF1 = 64-bit 
		refetchable Memory Limit/Base implemented For an endpoint, bits are defined as follows: Memory Space BAR (not upper bits of B
		R4) [0] = Mem Space Indicator (set to 0) [2:1] = Type field (00 for 32-bit; BAR5 cannot be lower part of a 64-bit BAR) [3] = 
		refetchable (0 or 1) [31:4] = Mask for writable bits of BAR; set uppermost 31:n bits to 1, where 2^n=memory aperture size in 
		ytes. IO Space BAR 0] = IO Space Indicator (set to 1) [1] = Reserved (set to 0) [31:2] = Mask for writable bits of BAR; set u
		permost 31:n bits to 1, where 2^n=i/o aperture size in bytes.; EP=0xFFFF; RP=0xFFF1
		PSU_PCIE_ATTRIB_ATTR_18_ATTR_BAR5                                               0xFFF1

		ATTR_18
		(OFFSET, MASK, VALUE)      (0XFD480048, 0x0000FFFFU ,0x0000FFF1U)  
		RegMask = (PCIE_ATTRIB_ATTR_18_ATTR_BAR5_MASK |  0 );

		RegVal = ((0x0000FFF1U << PCIE_ATTRIB_ATTR_18_ATTR_BAR5_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_18_OFFSET ,0x0000FFFFU ,0x0000FFF1U);
	/*############################################################################################################################ */

		/*Register : ATTR_27 @ 0XFD48006C</p>

		Specifies maximum payload supported. Valid settings are: 0- 128 bytes, 1- 256 bytes, 2- 512 bytes, 3- 1024 bytes. Transferred
		to the Device Capabilities register. The values: 4-2048 bytes, 5- 4096 bytes are not supported; EP=0x0001; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED                      1

		Endpoint L1 Acceptable Latency. Records the latency that the endpoint can withstand on transitions from L1 state to L0 (if L1
		state supported). Valid settings are: 0h less than 1us, 1h 1 to 2us, 2h 2 to 4us, 3h 4 to 8us, 4h 8 to 16us, 5h 16 to 32us, 6
		 32 to 64us, 7h more than 64us. For Endpoints only. Must be 0h for other devices.; EP=0x0007; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY                        0x0

		ATTR_27
		(OFFSET, MASK, VALUE)      (0XFD48006C, 0x00000738U ,0x00000100U)  
		RegMask = (PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_MASK | PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_MASK |  0 );

		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_MAX_PAYLOAD_SUPPORTED_SHIFT
			| 0x00000000U << PCIE_ATTRIB_ATTR_27_ATTR_DEV_CAP_ENDPOINT_L1_LATENCY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_27_OFFSET ,0x00000738U ,0x00000100U);
	/*############################################################################################################################ */

		/*Register : ATTR_50 @ 0XFD4800C8</p>

		Identifies the type of device/port as follows: 0000b PCI Express Endpoint device, 0001b Legacy PCI Express Endpoint device, 0
		00b Root Port of PCI Express Root Complex, 0101b Upstream Port of PCI Express Switch, 0110b Downstream Port of PCI Express Sw
		tch, 0111b PCIE Express to PCI/PCI-X Bridge, 1000b PCI/PCI-X to PCI Express Bridge. Transferred to PCI Express Capabilities r
		gister. Must be consistent with IS_SWITCH and UPSTREAM_FACING settings.; EP=0x0000; RP=0x0004
		PSU_PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE                          4

		PCIe Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capab
		lity.; EP=0x009C; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR                                   0

		ATTR_50
		(OFFSET, MASK, VALUE)      (0XFD4800C8, 0x0000FFF0U ,0x00000040U)  
		RegMask = (PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_MASK | PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_MASK |  0 );

		RegVal = ((0x00000004U << PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_DEVICE_PORT_TYPE_SHIFT
			| 0x00000000U << PCIE_ATTRIB_ATTR_50_ATTR_PCIE_CAP_NEXTPTR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_50_OFFSET ,0x0000FFF0U ,0x00000040U);
	/*############################################################################################################################ */

		/*Register : ATTR_105 @ 0XFD4801A4</p>

		Number of credits that should be advertised for Completion data received on Virtual Channel 0. The bytes advertised must be l
		ss than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0172; RP=0x00CD
		PSU_PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD                              0xCD

		ATTR_105
		(OFFSET, MASK, VALUE)      (0XFD4801A4, 0x000007FFU ,0x000000CDU)  
		RegMask = (PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_MASK |  0 );

		RegVal = ((0x000000CDU << PCIE_ATTRIB_ATTR_105_ATTR_VC0_TOTAL_CREDITS_CD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_105_OFFSET ,0x000007FFU ,0x000000CDU);
	/*############################################################################################################################ */

		/*Register : ATTR_106 @ 0XFD4801A8</p>

		Number of credits that should be advertised for Completion headers received on Virtual Channel 0. The sum of the posted, non 
		osted, and completion header credits must be <= 80; EP=0x0048; RP=0x0024
		PSU_PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH                              0x24

		Number of credits that should be advertised for Non-Posted headers received on Virtual Channel 0. The number of non posted da
		a credits advertised by the block is equal to the number of non posted header credits. The sum of the posted, non posted, and
		completion header credits must be <= 80; EP=0x0004; RP=0x000C
		PSU_PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH                             0xC

		ATTR_106
		(OFFSET, MASK, VALUE)      (0XFD4801A8, 0x00003FFFU ,0x00000624U)  
		RegMask = (PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_MASK | PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_MASK |  0 );

		RegVal = ((0x00000024U << PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_CH_SHIFT
			| 0x0000000CU << PCIE_ATTRIB_ATTR_106_ATTR_VC0_TOTAL_CREDITS_NPH_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_106_OFFSET ,0x00003FFFU ,0x00000624U);
	/*############################################################################################################################ */

		/*Register : ATTR_107 @ 0XFD4801AC</p>

		Number of credits that should be advertised for Non-Posted data received on Virtual Channel 0. The number of non posted data 
		redits advertised by the block is equal to two times the number of non posted header credits if atomic operations are support
		d or is equal to the number of non posted header credits if atomic operations are not supported. The bytes advertised must be
		less than or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0008; RP=0x0018
		PSU_PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD                             0x18

		ATTR_107
		(OFFSET, MASK, VALUE)      (0XFD4801AC, 0x000007FFU ,0x00000018U)  
		RegMask = (PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_MASK |  0 );

		RegVal = ((0x00000018U << PCIE_ATTRIB_ATTR_107_ATTR_VC0_TOTAL_CREDITS_NPD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_107_OFFSET ,0x000007FFU ,0x00000018U);
	/*############################################################################################################################ */

		/*Register : ATTR_108 @ 0XFD4801B0</p>

		Number of credits that should be advertised for Posted data received on Virtual Channel 0. The bytes advertised must be less 
		han or equal to the bram bytes available. See VC0_RX_RAM_LIMIT; EP=0x0020; RP=0x00B5
		PSU_PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD                              0xB5

		ATTR_108
		(OFFSET, MASK, VALUE)      (0XFD4801B0, 0x000007FFU ,0x000000B5U)  
		RegMask = (PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_MASK |  0 );

		RegVal = ((0x000000B5U << PCIE_ATTRIB_ATTR_108_ATTR_VC0_TOTAL_CREDITS_PD_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_108_OFFSET ,0x000007FFU ,0x000000B5U);
	/*############################################################################################################################ */

		/*Register : ATTR_109 @ 0XFD4801B4</p>

		Not currently in use. Invert ECRC generated by block when trn_tecrc_gen_n and trn_terrfwd_n are asserted.; EP=0x0000; RP=0x00
		0
		PSU_PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV                                      0x0

		Enables td bit clear and ECRC trim on received TLP's FALSE == don't trim TRUE == trim.; EP=0x0001; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM                                    0x1

		Enables ECRC check on received TLP's 0 == don't check 1 == always check 3 == check if enabled by ECRC check enable bit of AER
		cap structure; EP=0x0003; RP=0x0003
		PSU_PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK                                         0x3

		Index of last packet buffer used by TX TLM (i.e. number of buffers - 1). Calculated from max payload size supported and the n
		mber of brams configured for transmit; EP=0x001C; RP=0x001C
		PSU_PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET                                 0x1c

		Number of credits that should be advertised for Posted headers received on Virtual Channel 0. The sum of the posted, non post
		d, and completion header credits must be <= 80; EP=0x0004; RP=0x0020
		PSU_PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH                              0x20

		ATTR_109
		(OFFSET, MASK, VALUE)      (0XFD4801B4, 0x0000FFFFU ,0x00007E20U)  
		RegMask = (PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_MASK | PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_MASK | PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_MASK | PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_MASK | PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_109_ATTR_TECRC_EP_INV_SHIFT
			| 0x00000001U << PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_TRIM_SHIFT
			| 0x00000003U << PCIE_ATTRIB_ATTR_109_ATTR_RECRC_CHK_SHIFT
			| 0x0000001CU << PCIE_ATTRIB_ATTR_109_ATTR_VC0_TX_LASTPACKET_SHIFT
			| 0x00000020U << PCIE_ATTRIB_ATTR_109_ATTR_VC0_TOTAL_CREDITS_PH_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_109_OFFSET ,0x0000FFFFU ,0x00007E20U);
	/*############################################################################################################################ */

		/*Register : ATTR_34 @ 0XFD480088</p>

		Specifies values to be transferred to Header Type register. Bit 7 should be set to '0' indicating single-function device. Bit
		0 identifies header as Type 0 or Type 1, with '0' indicating a Type 0 header.; EP=0x0000; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE                                        0x1

		ATTR_34
		(OFFSET, MASK, VALUE)      (0XFD480088, 0x000000FFU ,0x00000001U)  
		RegMask = (PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_MASK |  0 );

		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_34_ATTR_HEADER_TYPE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_34_OFFSET ,0x000000FFU ,0x00000001U);
	/*############################################################################################################################ */

		/*Register : ATTR_53 @ 0XFD4800D4</p>

		PM Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabil
		ty.; EP=0x0048; RP=0x0060
		PSU_PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR                                     0x60

		ATTR_53
		(OFFSET, MASK, VALUE)      (0XFD4800D4, 0x000000FFU ,0x00000060U)  
		RegMask = (PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_MASK |  0 );

		RegVal = ((0x00000060U << PCIE_ATTRIB_ATTR_53_ATTR_PM_CAP_NEXTPTR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_53_OFFSET ,0x000000FFU ,0x00000060U);
	/*############################################################################################################################ */

		/*Register : ATTR_41 @ 0XFD4800A4</p>

		MSI Per-Vector Masking Capable. The value is transferred to the MSI Control Register[8]. When set, adds Mask and Pending Dwor
		 to Cap structure; EP=0x0000; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE                 0x0

		Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
		he management port.; EP=0x0001; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON                                         0

		MSI Capability's Next Capability Offset pointer to the next item in the capabilities list, or 00h if this is the final capabi
		ity.; EP=0x0060; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR                                    0x0

		Indicates that the MSI structures exists. If this is FALSE, then the MSI structure cannot be accessed via either the link or 
		he management port.; EP=0x0001; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON                                         0

		ATTR_41
		(OFFSET, MASK, VALUE)      (0XFD4800A4, 0x000003FFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_MASK | PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_PER_VECTOR_MASKING_CAPABLE_SHIFT
			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT
			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_NEXTPTR_SHIFT
			| 0x00000000U << PCIE_ATTRIB_ATTR_41_ATTR_MSI_CAP_ON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_41_OFFSET ,0x000003FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_97 @ 0XFD480184</p>

		Maximum Link Width. Valid settings are: 000001b x1, 000010b x2, 000100b x4, 001000b x8.; EP=0x0004; RP=0x0004
		PSU_PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH                            0x1

		Used by LTSSM to set Maximum Link Width. Valid settings are: 000001b [x1], 000010b [x2], 000100b [x4], 001000b [x8].; EP=0x00
		4; RP=0x0004
		PSU_PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH                               0x1

		ATTR_97
		(OFFSET, MASK, VALUE)      (0XFD480184, 0x00000FFFU ,0x00000041U)  
		RegMask = (PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_MASK | PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_MASK |  0 );

		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_97_ATTR_LINK_CAP_MAX_LINK_WIDTH_SHIFT
			| 0x00000001U << PCIE_ATTRIB_ATTR_97_ATTR_LTSSM_MAX_LINK_WIDTH_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_97_OFFSET ,0x00000FFFU ,0x00000041U);
	/*############################################################################################################################ */

		/*Register : ATTR_100 @ 0XFD480190</p>

		TRUE specifies upstream-facing port. FALSE specifies downstream-facing port.; EP=0x0001; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING                                   0x0

		ATTR_100
		(OFFSET, MASK, VALUE)      (0XFD480190, 0x00000040U ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_100_ATTR_UPSTREAM_FACING_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_100_OFFSET ,0x00000040U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_101 @ 0XFD480194</p>

		Enable the routing of message TLPs to the user through the TRN RX interface. A bit value of 1 enables routing of the message 
		LP to the user. Messages are always decoded by the message decoder. Bit 0 - ERR COR, Bit 1 - ERR NONFATAL, Bit 2 - ERR FATAL,
		Bit 3 - INTA Bit 4 - INTB, Bit 5 - INTC, Bit 6 - INTD, Bit 7 PM_PME, Bit 8 - PME_TO_ACK, Bit 9 - unlock, Bit 10 PME_Turn_Off;
		EP=0x0000; RP=0x07FF
		PSU_PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE                                  0x7FF

		Disable BAR filtering. Does not change the behavior of the bar hit outputs; EP=0x0000; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING                             0x1

		ATTR_101
		(OFFSET, MASK, VALUE)      (0XFD480194, 0x0000FFE2U ,0x0000FFE2U)  
		RegMask = (PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_MASK | PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_MASK |  0 );

		RegVal = ((0x000007FFU << PCIE_ATTRIB_ATTR_101_ATTR_ENABLE_MSG_ROUTE_SHIFT
			| 0x00000001U << PCIE_ATTRIB_ATTR_101_ATTR_DISABLE_BAR_FILTERING_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_101_OFFSET ,0x0000FFE2U ,0x0000FFE2U);
	/*############################################################################################################################ */

		/*Register : ATTR_37 @ 0XFD480094</p>

		Link Bandwidth notification capability. Indicates support for the link bandwidth notification status and interrupt mechanism.
		Required for Root.; EP=0x0000; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP           0x1

		Sets the ASPM Optionality Compliance bit, to comply with the 2.1 ASPM Optionality ECN. Transferred to the Link Capabilities r
		gister.; EP=0x0001; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY                          0x1

		ATTR_37
		(OFFSET, MASK, VALUE)      (0XFD480094, 0x00004200U ,0x00004200U)  
		RegMask = (PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_MASK | PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_MASK |  0 );

		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_LINK_BANDWIDTH_NOTIFICATION_CAP_SHIFT
			| 0x00000001U << PCIE_ATTRIB_ATTR_37_ATTR_LINK_CAP_ASPM_OPTIONALITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_37_OFFSET ,0x00004200U ,0x00004200U);
	/*############################################################################################################################ */

		/*Register : ATTR_93 @ 0XFD480174</p>

		Enables the Replay Timer to use the user-defined LL_REPLAY_TIMEOUT value (or combined with the built-in value, depending on L
		_REPLAY_TIMEOUT_FUNC). If FALSE, the built-in value is used.; EP=0x0000; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN                               0x1

		Sets a user-defined timeout for the Replay Timer to force cause the retransmission of unacknowledged TLPs; refer to LL_REPLAY
		TIMEOUT_EN and LL_REPLAY_TIMEOUT_FUNC to see how this value is used. The unit for this attribute is in symbol times, which is
		4ns at GEN1 speeds and 2ns at GEN2.; EP=0x0000; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT                                  0x1000

		ATTR_93
		(OFFSET, MASK, VALUE)      (0XFD480174, 0x0000FFFFU ,0x00009000U)  
		RegMask = (PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_MASK | PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_MASK |  0 );

		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_EN_SHIFT
			| 0x00001000U << PCIE_ATTRIB_ATTR_93_ATTR_LL_REPLAY_TIMEOUT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_93_OFFSET ,0x0000FFFFU ,0x00009000U);
	/*############################################################################################################################ */

		/*Register : ID @ 0XFD480200</p>

		Device ID for the the PCIe Cap Structure Device ID field
		PSU_PCIE_ATTRIB_ID_CFG_DEV_ID                                                   0xd021

		Vendor ID for the PCIe Cap Structure Vendor ID field
		PSU_PCIE_ATTRIB_ID_CFG_VEND_ID                                                  0x10ee

		ID
		(OFFSET, MASK, VALUE)      (0XFD480200, 0xFFFFFFFFU ,0x10EED021U)  
		RegMask = (PCIE_ATTRIB_ID_CFG_DEV_ID_MASK | PCIE_ATTRIB_ID_CFG_VEND_ID_MASK |  0 );

		RegVal = ((0x0000D021U << PCIE_ATTRIB_ID_CFG_DEV_ID_SHIFT
			| 0x000010EEU << PCIE_ATTRIB_ID_CFG_VEND_ID_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ID_OFFSET ,0xFFFFFFFFU ,0x10EED021U);
	/*############################################################################################################################ */

		/*Register : SUBSYS_ID @ 0XFD480204</p>

		Subsystem ID for the the PCIe Cap Structure Subsystem ID field
		PSU_PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID                                         0x7

		Subsystem Vendor ID for the PCIe Cap Structure Subsystem Vendor ID field
		PSU_PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID                                    0x10ee

		SUBSYS_ID
		(OFFSET, MASK, VALUE)      (0XFD480204, 0xFFFFFFFFU ,0x10EE0007U)  
		RegMask = (PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_MASK | PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_MASK |  0 );

		RegVal = ((0x00000007U << PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_ID_SHIFT
			| 0x000010EEU << PCIE_ATTRIB_SUBSYS_ID_CFG_SUBSYS_VEND_ID_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_SUBSYS_ID_OFFSET ,0xFFFFFFFFU ,0x10EE0007U);
	/*############################################################################################################################ */

		/*Register : REV_ID @ 0XFD480208</p>

		Revision ID for the the PCIe Cap Structure
		PSU_PCIE_ATTRIB_REV_ID_CFG_REV_ID                                               0x0

		REV_ID
		(OFFSET, MASK, VALUE)      (0XFD480208, 0x000000FFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_REV_ID_CFG_REV_ID_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_REV_ID_CFG_REV_ID_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_REV_ID_OFFSET ,0x000000FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_24 @ 0XFD480060</p>

		Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
		8000; RP=0x8000
		PSU_PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE                                         0x400

		ATTR_24
		(OFFSET, MASK, VALUE)      (0XFD480060, 0x0000FFFFU ,0x00000400U)  
		RegMask = (PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_MASK |  0 );

		RegVal = ((0x00000400U << PCIE_ATTRIB_ATTR_24_ATTR_CLASS_CODE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_24_OFFSET ,0x0000FFFFU ,0x00000400U);
	/*############################################################################################################################ */

		/*Register : ATTR_25 @ 0XFD480064</p>

		Code identifying basic function, subclass and applicable programming interface. Transferred to the Class Code register.; EP=0
		0005; RP=0x0006
		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE                                         0x6

		INTX Interrupt Generation Capable. If FALSE, this will cause Command[10] to be hardwired to 0.; EP=0x0001; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED                               0

		ATTR_25
		(OFFSET, MASK, VALUE)      (0XFD480064, 0x000001FFU ,0x00000006U)  
		RegMask = (PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_MASK | PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_MASK |  0 );

		RegVal = ((0x00000006U << PCIE_ATTRIB_ATTR_25_ATTR_CLASS_CODE_SHIFT
			| 0x00000000U << PCIE_ATTRIB_ATTR_25_ATTR_CMD_INTX_IMPLEMENTED_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_25_OFFSET ,0x000001FFU ,0x00000006U);
	/*############################################################################################################################ */

		/*Register : ATTR_4 @ 0XFD480010</p>

		Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
		ges are sent if an error is detected).; EP=0x0001; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON                                          0

		Indicates that the AER structures exists. If this is FALSE, then the AER structure cannot be accessed via either the link or 
		he management port, and AER will be considered to not be present for error management tasks (such as what types of error mess
		ges are sent if an error is detected).; EP=0x0001; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON                                          0

		ATTR_4
		(OFFSET, MASK, VALUE)      (0XFD480010, 0x00001000U ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK | PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT
			| 0x00000000U << PCIE_ATTRIB_ATTR_4_ATTR_AER_CAP_ON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_4_OFFSET ,0x00001000U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_89 @ 0XFD480164</p>

		VSEC's Next Capability Offset pointer to the next item in the capabilities list, or 000h if this is the final capability.; EP
		0x0140; RP=0x0140
		PSU_PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR                                   0

		ATTR_89
		(OFFSET, MASK, VALUE)      (0XFD480164, 0x00001FFEU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_89_ATTR_VSEC_CAP_NEXTPTR_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_89_OFFSET ,0x00001FFEU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_79 @ 0XFD48013C</p>

		CRS SW Visibility. Indicates RC can return CRS to SW. Transferred to the Root Capabilities register.; EP=0x0000; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY                         1

		ATTR_79
		(OFFSET, MASK, VALUE)      (0XFD48013C, 0x00000020U ,0x00000020U)  
		RegMask = (PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_MASK |  0 );

		RegVal = ((0x00000001U << PCIE_ATTRIB_ATTR_79_ATTR_ROOT_CAP_CRS_SW_VISIBILITY_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_79_OFFSET ,0x00000020U ,0x00000020U);
	/*############################################################################################################################ */

		/*Register : ATTR_43 @ 0XFD4800AC</p>

		Indicates that the MSIX structures exists. If this is FALSE, then the MSIX structure cannot be accessed via either the link o
		 the management port.; EP=0x0001; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON                                        0

		ATTR_43
		(OFFSET, MASK, VALUE)      (0XFD4800AC, 0x00000100U ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_43_ATTR_MSIX_CAP_ON_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_43_OFFSET ,0x00000100U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_48 @ 0XFD4800C0</p>

		MSI-X Table Size. This value is transferred to the MSI-X Message Control[10:0] field. Set to 0 if MSI-X is not enabled. Note 
		hat the core does not implement the table; that must be implemented in user logic.; EP=0x0003; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE                                0

		ATTR_48
		(OFFSET, MASK, VALUE)      (0XFD4800C0, 0x000007FFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_48_ATTR_MSIX_CAP_TABLE_SIZE_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_48_OFFSET ,0x000007FFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_46 @ 0XFD4800B8</p>

		MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0001; 
		P=0x0000
		PSU_PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET                              0

		ATTR_46
		(OFFSET, MASK, VALUE)      (0XFD4800B8, 0x0000FFFFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_46_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_46_OFFSET ,0x0000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_47 @ 0XFD4800BC</p>

		MSI-X Table Offset. This value is transferred to the MSI-X Table Offset field. Set to 0 if MSI-X is not enabled.; EP=0x0000; 
		P=0x0000
		PSU_PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET                              0

		ATTR_47
		(OFFSET, MASK, VALUE)      (0XFD4800BC, 0x00001FFFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_47_ATTR_MSIX_CAP_TABLE_OFFSET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_47_OFFSET ,0x00001FFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_44 @ 0XFD4800B0</p>

		MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP
		0x0001; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET                                0

		ATTR_44
		(OFFSET, MASK, VALUE)      (0XFD4800B0, 0x0000FFFFU ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_44_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_44_OFFSET ,0x0000FFFFU ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_45 @ 0XFD4800B4</p>

		MSI-X Pending Bit Array Offset This value is transferred to the MSI-X PBA Offset field. Set to 0 if MSI-X is not enabled.; EP
		0x1000; RP=0x0000
		PSU_PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET                                0

		ATTR_45
		(OFFSET, MASK, VALUE)      (0XFD4800B4, 0x0000FFF8U ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_45_ATTR_MSIX_CAP_PBA_OFFSET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_45_OFFSET ,0x0000FFF8U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : CB @ 0XFD48031C</p>

		DT837748 Enable
		PSU_PCIE_ATTRIB_CB_CB1                                                          0x0

		ECO Register 1
		(OFFSET, MASK, VALUE)      (0XFD48031C, 0x00000002U ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_CB_CB1_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_CB_CB1_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_CB_OFFSET ,0x00000002U ,0x00000000U);
	/*############################################################################################################################ */

		/*Register : ATTR_35 @ 0XFD48008C</p>

		Active State PM Support. Indicates the level of active state power management supported by the selected PCI Express Link, enc
		ded as follows: 0 Reserved, 1 L0s entry supported, 2 Reserved, 3 L0s and L1 entry supported.; EP=0x0001; RP=0x0001
		PSU_PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT                              0x0

		ATTR_35
		(OFFSET, MASK, VALUE)      (0XFD48008C, 0x00003000U ,0x00000000U)  
		RegMask = (PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_MASK |  0 );

		RegVal = ((0x00000000U << PCIE_ATTRIB_ATTR_35_ATTR_LINK_CAP_ASPM_SUPPORT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PCIE_ATTRIB_ATTR_35_OFFSET ,0x00003000U ,0x00000000U);
	/*############################################################################################################################ */

		// : PUTTING PCIE CONTROL IN RESET
		/*Register : RST_FPD_TOP @ 0XFD1A0100</p>

		PCIE control block level reset
		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0X0

		FPD Block level software controlled reset
		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00020000U ,0x00000000U)  
		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK |  0 );

		RegVal = ((0x00000000U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00020000U ,0x00000000U);
	/*############################################################################################################################ */

		// : CHECK PLL LOCK FOR LANE0
		/*Register : L0_PLL_STATUS_READ_1 @ 0XFD4023E4</p>

		Status Read value of PLL Lock
		PSU_SERDES_L0_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
		(OFFSET, MASK, VALUE)      (0XFD4023E4, 0x00000010U ,0x00000010U)  */
		mask_poll(SERDES_L0_PLL_STATUS_READ_1_OFFSET,0x00000010U);

	/*############################################################################################################################ */

		// : CHECK PLL LOCK FOR LANE1
		/*Register : L1_PLL_STATUS_READ_1 @ 0XFD4063E4</p>

		Status Read value of PLL Lock
		PSU_SERDES_L1_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
		(OFFSET, MASK, VALUE)      (0XFD4063E4, 0x00000010U ,0x00000010U)  */
		mask_poll(SERDES_L1_PLL_STATUS_READ_1_OFFSET,0x00000010U);

	/*############################################################################################################################ */

		// : CHECK PLL LOCK FOR LANE2
		/*Register : L2_PLL_STATUS_READ_1 @ 0XFD40A3E4</p>

		Status Read value of PLL Lock
		PSU_SERDES_L2_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
		(OFFSET, MASK, VALUE)      (0XFD40A3E4, 0x00000010U ,0x00000010U)  */
		mask_poll(SERDES_L2_PLL_STATUS_READ_1_OFFSET,0x00000010U);

	/*############################################################################################################################ */

		// : CHECK PLL LOCK FOR LANE3
		/*Register : L3_PLL_STATUS_READ_1 @ 0XFD40E3E4</p>

		Status Read value of PLL Lock
		PSU_SERDES_L3_PLL_STATUS_READ_1_PLL_LOCK_STATUS_READ                            1
		(OFFSET, MASK, VALUE)      (0XFD40E3E4, 0x00000010U ,0x00000010U)  */
		mask_poll(SERDES_L3_PLL_STATUS_READ_1_OFFSET,0x00000010U);

	/*############################################################################################################################ */

		// : SATA AHCI VENDOR SETTING
		/*Register : PP2C @ 0XFD0C00AC</p>

		CIBGMN: COMINIT Burst Gap Minimum.
		PSU_SATA_AHCI_VENDOR_PP2C_CIBGMN                                                0x18

		CIBGMX: COMINIT Burst Gap Maximum.
		PSU_SATA_AHCI_VENDOR_PP2C_CIBGMX                                                0x40

		CIBGN: COMINIT Burst Gap Nominal.
		PSU_SATA_AHCI_VENDOR_PP2C_CIBGN                                                 0x18

		CINMP: COMINIT Negate Minimum Period.
		PSU_SATA_AHCI_VENDOR_PP2C_CINMP                                                 0x28

		PP2C - Port Phy2Cfg Register. This register controls the configuration of the Phy Control OOB timing for the COMINIT paramete
		s for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register.
		(OFFSET, MASK, VALUE)      (0XFD0C00AC, 0xFFFFFFFFU ,0x28184018U)  
		RegMask = (SATA_AHCI_VENDOR_PP2C_CIBGMN_MASK | SATA_AHCI_VENDOR_PP2C_CIBGMX_MASK | SATA_AHCI_VENDOR_PP2C_CIBGN_MASK | SATA_AHCI_VENDOR_PP2C_CINMP_MASK |  0 );

		RegVal = ((0x00000018U << SATA_AHCI_VENDOR_PP2C_CIBGMN_SHIFT
			| 0x00000040U << SATA_AHCI_VENDOR_PP2C_CIBGMX_SHIFT
			| 0x00000018U << SATA_AHCI_VENDOR_PP2C_CIBGN_SHIFT
			| 0x00000028U << SATA_AHCI_VENDOR_PP2C_CINMP_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SATA_AHCI_VENDOR_PP2C_OFFSET ,0xFFFFFFFFU ,0x28184018U);
	/*############################################################################################################################ */

		/*Register : PP3C @ 0XFD0C00B0</p>

		CWBGMN: COMWAKE Burst Gap Minimum.
		PSU_SATA_AHCI_VENDOR_PP3C_CWBGMN                                                0x06

		CWBGMX: COMWAKE Burst Gap Maximum.
		PSU_SATA_AHCI_VENDOR_PP3C_CWBGMX                                                0x14

		CWBGN: COMWAKE Burst Gap Nominal.
		PSU_SATA_AHCI_VENDOR_PP3C_CWBGN                                                 0x08

		CWNMP: COMWAKE Negate Minimum Period.
		PSU_SATA_AHCI_VENDOR_PP3C_CWNMP                                                 0x0E

		PP3C - Port Phy3CfgRegister. This register controls the configuration of the Phy Control OOB timing for the COMWAKE parameter
		 for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register.
		(OFFSET, MASK, VALUE)      (0XFD0C00B0, 0xFFFFFFFFU ,0x0E081406U)  
		RegMask = (SATA_AHCI_VENDOR_PP3C_CWBGMN_MASK | SATA_AHCI_VENDOR_PP3C_CWBGMX_MASK | SATA_AHCI_VENDOR_PP3C_CWBGN_MASK | SATA_AHCI_VENDOR_PP3C_CWNMP_MASK |  0 );

		RegVal = ((0x00000006U << SATA_AHCI_VENDOR_PP3C_CWBGMN_SHIFT
			| 0x00000014U << SATA_AHCI_VENDOR_PP3C_CWBGMX_SHIFT
			| 0x00000008U << SATA_AHCI_VENDOR_PP3C_CWBGN_SHIFT
			| 0x0000000EU << SATA_AHCI_VENDOR_PP3C_CWNMP_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SATA_AHCI_VENDOR_PP3C_OFFSET ,0xFFFFFFFFU ,0x0E081406U);
	/*############################################################################################################################ */

		/*Register : PP4C @ 0XFD0C00B4</p>

		BMX: COM Burst Maximum.
		PSU_SATA_AHCI_VENDOR_PP4C_BMX                                                   0x13

		BNM: COM Burst Nominal.
		PSU_SATA_AHCI_VENDOR_PP4C_BNM                                                   0x08

		SFD: Signal Failure Detection, if the signal detection de-asserts for a time greater than this then the OOB detector will det
		rmine this is a line idle and cause the PhyInit state machine to exit the Phy Ready State. A value of zero disables the Signa
		 Failure Detector. The value is based on the OOB Detector Clock typically (PMCLK Clock Period) * SFD giving a nominal time of
		500ns based on a 150MHz PMCLK.
		PSU_SATA_AHCI_VENDOR_PP4C_SFD                                                   0x4A

		PTST: Partial to Slumber timer value, specific delay the controller should apply while in partial before entering slumber. Th
		 value is bases on the system clock divided by 128, total delay = (Sys Clock Period) * PTST * 128
		PSU_SATA_AHCI_VENDOR_PP4C_PTST                                                  0x06

		PP4C - Port Phy4Cfg Register. This register controls the configuration of the Phy Control Burst timing for the COM parameters
		for either Port 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register.
		(OFFSET, MASK, VALUE)      (0XFD0C00B4, 0xFFFFFFFFU ,0x064A0813U)  
		RegMask = (SATA_AHCI_VENDOR_PP4C_BMX_MASK | SATA_AHCI_VENDOR_PP4C_BNM_MASK | SATA_AHCI_VENDOR_PP4C_SFD_MASK | SATA_AHCI_VENDOR_PP4C_PTST_MASK |  0 );

		RegVal = ((0x00000013U << SATA_AHCI_VENDOR_PP4C_BMX_SHIFT
			| 0x00000008U << SATA_AHCI_VENDOR_PP4C_BNM_SHIFT
			| 0x0000004AU << SATA_AHCI_VENDOR_PP4C_SFD_SHIFT
			| 0x00000006U << SATA_AHCI_VENDOR_PP4C_PTST_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SATA_AHCI_VENDOR_PP4C_OFFSET ,0xFFFFFFFFU ,0x064A0813U);
	/*############################################################################################################################ */

		/*Register : PP5C @ 0XFD0C00B8</p>

		RIT: Retry Interval Timer. The calculated value divided by two, the lower digit of precision is not needed.
		PSU_SATA_AHCI_VENDOR_PP5C_RIT                                                   0xC96A4

		RCT: Rate Change Timer, a value based on the 54.2us for which a SATA device will transmit at a fixed rate ALIGNp after OOB ha
		 completed, for a fast SERDES it is suggested that this value be 54.2us / 4
		PSU_SATA_AHCI_VENDOR_PP5C_RCT                                                   0x3FF

		PP5C - Port Phy5Cfg Register. This register controls the configuration of the Phy Control Retry Interval timing for either Po
		t 0 or Port 1. The Port configured is controlled by the value programmed into the Port Config Register.
		(OFFSET, MASK, VALUE)      (0XFD0C00B8, 0xFFFFFFFFU ,0x3FFC96A4U)  
		RegMask = (SATA_AHCI_VENDOR_PP5C_RIT_MASK | SATA_AHCI_VENDOR_PP5C_RCT_MASK |  0 );

		RegVal = ((0x000C96A4U << SATA_AHCI_VENDOR_PP5C_RIT_SHIFT
			| 0x000003FFU << SATA_AHCI_VENDOR_PP5C_RCT_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (SATA_AHCI_VENDOR_PP5C_OFFSET ,0xFFFFFFFFU ,0x3FFC96A4U);
	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_resetin_init_data() {
		// : PUTTING SERDES PERIPHERAL IN RESET
		// : PUTTING USB0 IN RESET
		/*Register : RST_LPD_TOP @ 0XFF5E023C</p>

		USB 0 reset for control registers
		PSU_CRL_APB_RST_LPD_TOP_USB0_APB_RESET                                          0X1

		USB 0 sleep circuit reset
		PSU_CRL_APB_RST_LPD_TOP_USB0_HIBERRESET                                         0X1

		USB 0 reset
		PSU_CRL_APB_RST_LPD_TOP_USB0_CORERESET                                          0X1

		Software control register for the LPD block.
		(OFFSET, MASK, VALUE)      (0XFF5E023C, 0x00000540U ,0x00000540U)  
		RegMask = (CRL_APB_RST_LPD_TOP_USB0_APB_RESET_MASK | CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_MASK | CRL_APB_RST_LPD_TOP_USB0_CORERESET_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_RST_LPD_TOP_USB0_APB_RESET_SHIFT
			| 0x00000001U << CRL_APB_RST_LPD_TOP_USB0_HIBERRESET_SHIFT
			| 0x00000001U << CRL_APB_RST_LPD_TOP_USB0_CORERESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_TOP_OFFSET ,0x00000540U ,0x00000540U);
	/*############################################################################################################################ */

		// : PUTTING GEM0 IN RESET
		/*Register : RST_LPD_IOU0 @ 0XFF5E0230</p>

		GEM 3 reset
		PSU_CRL_APB_RST_LPD_IOU0_GEM3_RESET                                             0X1

		Software controlled reset for the GEMs
		(OFFSET, MASK, VALUE)      (0XFF5E0230, 0x00000008U ,0x00000008U)  
		RegMask = (CRL_APB_RST_LPD_IOU0_GEM3_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRL_APB_RST_LPD_IOU0_GEM3_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRL_APB_RST_LPD_IOU0_OFFSET ,0x00000008U ,0x00000008U);
	/*############################################################################################################################ */

		// : PUTTING SATA IN RESET
		/*Register : RST_FPD_TOP @ 0XFD1A0100</p>

		Sata block level reset
		PSU_CRF_APB_RST_FPD_TOP_SATA_RESET                                              0X1

		FPD Block level software controlled reset
		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00000002U ,0x00000002U)  
		RegMask = (CRF_APB_RST_FPD_TOP_SATA_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_SATA_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00000002U ,0x00000002U);
	/*############################################################################################################################ */

		// : PUTTING PCIE IN RESET
		/*Register : RST_FPD_TOP @ 0XFD1A0100</p>

		PCIE config reset
		PSU_CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET                                          0X1

		PCIE control block level reset
		PSU_CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET                                         0X1

		PCIE bridge block level reset (AXI interface)
		PSU_CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET                                       0X1

		FPD Block level software controlled reset
		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x000E0000U ,0x000E0000U)  
		RegMask = (CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_MASK | CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_CFG_RESET_SHIFT
			| 0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_CTRL_RESET_SHIFT
			| 0x00000001U << CRF_APB_RST_FPD_TOP_PCIE_BRIDGE_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x000E0000U ,0x000E0000U);
	/*############################################################################################################################ */

		// : PUTTING DP IN RESET
		/*Register : DP_TX_PHY_POWER_DOWN @ 0XFD4A0238</p>

		Two bits per lane. When set to 11, moves the GT to power down mode. When set to 00, GT will be in active state. bits [1:0] - 
		ane0 Bits [3:2] - lane 1
		PSU_DP_DP_TX_PHY_POWER_DOWN_POWER_DWN                                           0XA

		Control PHY Power down
		(OFFSET, MASK, VALUE)      (0XFD4A0238, 0x0000000FU ,0x0000000AU)  
		RegMask = (DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_MASK |  0 );

		RegVal = ((0x0000000AU << DP_DP_TX_PHY_POWER_DOWN_POWER_DWN_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DP_DP_TX_PHY_POWER_DOWN_OFFSET ,0x0000000FU ,0x0000000AU);
	/*############################################################################################################################ */

		/*Register : DP_PHY_RESET @ 0XFD4A0200</p>

		Set to '1' to hold the GT in reset. Clear to release.
		PSU_DP_DP_PHY_RESET_GT_RESET                                                    0X1

		Reset the transmitter PHY.
		(OFFSET, MASK, VALUE)      (0XFD4A0200, 0x00000002U ,0x00000002U)  
		RegMask = (DP_DP_PHY_RESET_GT_RESET_MASK |  0 );

		RegVal = ((0x00000001U << DP_DP_PHY_RESET_GT_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (DP_DP_PHY_RESET_OFFSET ,0x00000002U ,0x00000002U);
	/*############################################################################################################################ */

		/*Register : RST_FPD_TOP @ 0XFD1A0100</p>

		Display Port block level reset (includes DPDMA)
		PSU_CRF_APB_RST_FPD_TOP_DP_RESET                                                0X1

		FPD Block level software controlled reset
		(OFFSET, MASK, VALUE)      (0XFD1A0100, 0x00010000U ,0x00010000U)  
		RegMask = (CRF_APB_RST_FPD_TOP_DP_RESET_MASK |  0 );

		RegVal = ((0x00000001U << CRF_APB_RST_FPD_TOP_DP_RESET_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (CRF_APB_RST_FPD_TOP_OFFSET ,0x00010000U ,0x00010000U);
	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_ps_pl_isolation_removal_data() {
		// : PS-PL POWER UP REQUEST
		/*Register : REQ_PWRUP_INT_EN @ 0XFFD80118</p>

		Power-up Request Interrupt Enable for PL
		PSU_PMU_GLOBAL_REQ_PWRUP_INT_EN_PL                                              1

		Power-up Request Interrupt Enable Register. Writing a 1 to this location will unmask the interrupt.
		(OFFSET, MASK, VALUE)      (0XFFD80118, 0x00800000U ,0x00800000U)  
		RegMask = (PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_MASK |  0 );

		RegVal = ((0x00000001U << PMU_GLOBAL_REQ_PWRUP_INT_EN_PL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PMU_GLOBAL_REQ_PWRUP_INT_EN_OFFSET ,0x00800000U ,0x00800000U);
	/*############################################################################################################################ */

		/*Register : REQ_PWRUP_TRIG @ 0XFFD80120</p>

		Power-up Request Trigger for PL
		PSU_PMU_GLOBAL_REQ_PWRUP_TRIG_PL                                                1

		Power-up Request Trigger Register. A write of one to this location will generate a power-up request to the PMU.
		(OFFSET, MASK, VALUE)      (0XFFD80120, 0x00800000U ,0x00800000U)  
		RegMask = (PMU_GLOBAL_REQ_PWRUP_TRIG_PL_MASK |  0 );

		RegVal = ((0x00000001U << PMU_GLOBAL_REQ_PWRUP_TRIG_PL_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (PMU_GLOBAL_REQ_PWRUP_TRIG_OFFSET ,0x00800000U ,0x00800000U);
	/*############################################################################################################################ */

		// : POLL ON PL POWER STATUS
		/*Register : REQ_PWRUP_STATUS @ 0XFFD80110</p>

		Power-up Request Status for PL
		PSU_PMU_GLOBAL_REQ_PWRUP_STATUS_PL                                              1
		(OFFSET, MASK, VALUE)      (0XFFD80110, 0x00800000U ,0x00000000U)  */
		mask_pollOnValue(PMU_GLOBAL_REQ_PWRUP_STATUS_OFFSET,0x00800000U,0x00000000U);

	/*############################################################################################################################ */


  return 1;
}
unsigned long psu_ps_pl_reset_config_data() {
		// : PS PL RESET SEQUENCE
		// : FABRIC RESET USING EMIO
		/*Register : MASK_DATA_5_MSW @ 0XFF0A002C</p>

		Operation is the same as MASK_DATA_0_LSW[MASK_0_LSW]
		PSU_GPIO_MASK_DATA_5_MSW_MASK_5_MSW                                             0x8000

		Maskable Output Data (GPIO Bank5, EMIO, Upper 16bits)
		(OFFSET, MASK, VALUE)      (0XFF0A002C, 0xFFFF0000U ,0x80000000U)  
		RegMask = (GPIO_MASK_DATA_5_MSW_MASK_5_MSW_MASK |  0 );

		RegVal = ((0x00008000U << GPIO_MASK_DATA_5_MSW_MASK_5_MSW_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (GPIO_MASK_DATA_5_MSW_OFFSET ,0xFFFF0000U ,0x80000000U);
	/*############################################################################################################################ */

		/*Register : DIRM_5 @ 0XFF0A0344</p>

		Operation is the same as DIRM_0[DIRECTION_0]
		PSU_GPIO_DIRM_5_DIRECTION_5                                                     0x80000000

		Direction mode (GPIO Bank5, EMIO)
		(OFFSET, MASK, VALUE)      (0XFF0A0344, 0xFFFFFFFFU ,0x80000000U)  
		RegMask = (GPIO_DIRM_5_DIRECTION_5_MASK |  0 );

		RegVal = ((0x80000000U << GPIO_DIRM_5_DIRECTION_5_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (GPIO_DIRM_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
	/*############################################################################################################################ */

		/*Register : OEN_5 @ 0XFF0A0348</p>

		Operation is the same as OEN_0[OP_ENABLE_0]
		PSU_GPIO_OEN_5_OP_ENABLE_5                                                      0x80000000

		Output enable (GPIO Bank5, EMIO)
		(OFFSET, MASK, VALUE)      (0XFF0A0348, 0xFFFFFFFFU ,0x80000000U)  
		RegMask = (GPIO_OEN_5_OP_ENABLE_5_MASK |  0 );

		RegVal = ((0x80000000U << GPIO_OEN_5_OP_ENABLE_5_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (GPIO_OEN_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
	/*############################################################################################################################ */

		/*Register : DATA_5 @ 0XFF0A0054</p>

		Output Data
		PSU_GPIO_DATA_5_DATA_5                                                          0x80000000

		Output Data (GPIO Bank5, EMIO)
		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x80000000U)  
		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );

		RegVal = ((0x80000000U << GPIO_DATA_5_DATA_5_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
	/*############################################################################################################################ */

		mask_delay(1);

	/*############################################################################################################################ */

		// : FABRIC RESET USING DATA_5 TOGGLE
		/*Register : DATA_5 @ 0XFF0A0054</p>

		Output Data
		PSU_GPIO_DATA_5_DATA_5                                                          0X00000000

		Output Data (GPIO Bank5, EMIO)
		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x00000000U)  
		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );

		RegVal = ((0x00000000U << GPIO_DATA_5_DATA_5_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x00000000U);
	/*############################################################################################################################ */

		mask_delay(1);

	/*############################################################################################################################ */

		// : FABRIC RESET USING DATA_5 TOGGLE
		/*Register : DATA_5 @ 0XFF0A0054</p>

		Output Data
		PSU_GPIO_DATA_5_DATA_5                                                          0x80000000

		Output Data (GPIO Bank5, EMIO)
		(OFFSET, MASK, VALUE)      (0XFF0A0054, 0xFFFFFFFFU ,0x80000000U)  
		RegMask = (GPIO_DATA_5_DATA_5_MASK |  0 );

		RegVal = ((0x80000000U << GPIO_DATA_5_DATA_5_SHIFT
			|  0 ) & RegMask); */
		PSU_Mask_Write (GPIO_DATA_5_OFFSET ,0xFFFFFFFFU ,0x80000000U);
	/*############################################################################################################################ */


  return 1;
}

unsigned long psu_ddr_phybringup_data() {


		unsigned int regval = 0;
	int dpll_divisor;
	dpll_divisor = (Xil_In32(0xFD1A0080U) & 0x00003F00U) >> 0x00000008U;
	prog_reg (0xFD1A0080U, 0x00003F00U, 0x00000008U, 0x00000005U);
	prog_reg (0xFD080028U, 0x00000001U, 0x00000000U, 0x00000001U);
	Xil_Out32(0xFD080004U, 0x00040003U);
	while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U);
	prog_reg (0xFD080684U, 0x06000000U, 0x00000019U, 0x00000001U);
	prog_reg (0xFD0806A4U, 0x06000000U, 0x00000019U, 0x00000001U);
	prog_reg (0xFD0806C4U, 0x06000000U, 0x00000019U, 0x00000001U);
	prog_reg (0xFD0806E4U, 0x06000000U, 0x00000019U, 0x00000001U);
	prog_reg (0xFD1A0080, 0x3F00, 0x8, dpll_divisor);
	Xil_Out32(0xFD080004U, 0x40040071U);
	while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U);
	Xil_Out32(0xFD080004U, 0x40040001U);
	while ((Xil_In32(0xFD080030U) & 0x00000001U) != 0x00000001U);
	// PHY BRINGUP SEQ
	while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU);
	prog_reg (0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U);
	//poll for PHY initialization to complete 
	while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU);
	
	Xil_Out32(0xFD0701B0U, 0x00000001U);
	Xil_Out32(0xFD070320U, 0x00000001U);
	while ((Xil_In32(0xFD070004U) & 0x0000000FU) != 0x00000001U);
	prog_reg (0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U);
	 Xil_Out32(0xFD080004, 0x0004FE01); //PUB_PIR  
	  regval = Xil_In32(0xFD080030); //PUB_PGSR0
	  while(regval != 0x80000FFF){   
	     regval = Xil_In32(0xFD080030); //PUB_PGSR0 
	  } 

	
 // Run Vref training in static read mode  
	Xil_Out32(0xFD080200U, 0x100091C7U);
	Xil_Out32(0xFD080018U, 0x00F01EF2U);
	Xil_Out32(0xFD08001CU, 0x55AA5498U);
	Xil_Out32(0xFD08142CU, 0x00041830U);
	Xil_Out32(0xFD08146CU, 0x00041830U);
	Xil_Out32(0xFD0814ACU, 0x00041830U);
	Xil_Out32(0xFD0814ECU, 0x00041830U);
	Xil_Out32(0xFD08152CU, 0x00041830U);
	 

	 Xil_Out32(0xFD080004, 0x00060001); //PUB_PIR  
	  regval = Xil_In32(0xFD080030); //PUB_PGSR0
	  while((regval & 0x80004001) != 0x80004001){   
	     regval = Xil_In32(0xFD080030); //PUB_PGSR0 
	  } 

	 // Vref training is complete, disabling static read mode 
	Xil_Out32(0xFD080200U, 0x800091C7U);
	Xil_Out32(0xFD080018U, 0x00F12302U);
	Xil_Out32(0xFD08001CU, 0x55AA5480U);
	Xil_Out32(0xFD08142CU, 0x00041800U);
	Xil_Out32(0xFD08146CU, 0x00041800U);
	Xil_Out32(0xFD0814ACU, 0x00041800U);
	Xil_Out32(0xFD0814ECU, 0x00041800U);
	Xil_Out32(0xFD08152CU, 0x00041800U);
	 

	 Xil_Out32(0xFD080004, 0x0000C001); //PUB_PIR  
	  regval = Xil_In32(0xFD080030); //PUB_PGSR0
	  while((regval & 0x80000C01) != 0x80000C01){   
	     regval = Xil_In32(0xFD080030); //PUB_PGSR0 
	  } 

	Xil_Out32(0xFD070180U, 0x01000040U);
	Xil_Out32(0xFD070060U, 0x00000000U);
	prog_reg (0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U);

return 1; 
}

/**
 * CRL_APB Base Address
 */
#define CRL_APB_BASEADDR      0XFF5E0000U
#define CRL_APB_RST_LPD_IOU0    ( ( CRL_APB_BASEADDR ) + 0X00000230U )
#define CRL_APB_RST_LPD_IOU1    ( ( CRL_APB_BASEADDR ) + 0X00000234U )
#define CRL_APB_RST_LPD_IOU2    ( ( CRL_APB_BASEADDR ) + 0X00000238U )
#define CRL_APB_RST_LPD_TOP    ( ( CRL_APB_BASEADDR ) + 0X0000023CU )
#define CRL_APB_IOU_SWITCH_CTRL    ( ( CRL_APB_BASEADDR ) + 0X0000009CU )

/**
 * CRF_APB Base Address
 */
#define CRF_APB_BASEADDR      0XFD1A0000U

#define CRF_APB_RST_FPD_TOP    ( ( CRF_APB_BASEADDR ) + 0X00000100U )
#define CRF_APB_GPU_REF_CTRL    ( ( CRF_APB_BASEADDR ) + 0X00000084U )
#define CRF_APB_RST_DDR_SS    ( ( CRF_APB_BASEADDR ) + 0X00000108U )
#define PSU_MASK_POLL_TIME 1100000


int mask_pollOnValue(u32 add , u32 mask, u32 value ) {
	volatile u32 *addr = (volatile u32*)(unsigned long) add;
	int i = 0;
	while ((*addr & mask)!= value) {
		if (i == PSU_MASK_POLL_TIME) {
			return 0;
		}
		i++;
	}
	return 1;   
	//xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr);
}

int mask_poll(u32 add , u32 mask) {
	volatile u32 *addr = (volatile u32*)(unsigned long) add;
	int i = 0;
	while (!(*addr & mask)) {
		if (i == PSU_MASK_POLL_TIME) {
			return 0;
		}
		i++;
	}
	return 1;   
	//xil_printf("MaskPoll : 0x%x --> 0x%x \n \r" , add, *addr);
}

void mask_delay(u32 delay) {
    usleep (delay);
}

u32 mask_read(u32 add , u32 mask ) {
        volatile u32 *addr = (volatile u32*)(unsigned long) add;
        u32 val = (*addr & mask);
        //xil_printf("MaskRead : 0x%x --> 0x%x \n \r" , add, val);
        return val;
}


//Following SERDES programming sequences that a user need to follow to work around the known limitation with SERDES. 
//These sequences should done before STEP 1 and STEP 2 as described in previous section. These programming steps are
//required for current silicon version and are likely to undergo further changes with subsequent silicon versions.


int serdes_fixcal_code() {
	int MaskStatus = 1;

   // L3_TM_CALIB_DIG19
   Xil_Out32(0xFD40EC4C,0x00000020);
   //ICM_CFG0
   Xil_Out32(0xFD410010,0x00000001);

   //is calibration done, polling on L3_CALIB_DONE_STATUS
   MaskStatus = mask_poll(0xFD40EF14, 0x2);
   
   if (MaskStatus == 0)
   {
        xil_printf("SERDES initialization timed out\n\r");
   }
 
   unsigned int tmp_0_1; 
   tmp_0_1 = mask_read(0xFD400B0C, 0x3F);
   
   unsigned int tmp_0_2 = tmp_0_1 & (0x7); 
   unsigned int tmp_0_3 = tmp_0_1 & (0x38);
   //Configure ICM for de-asserting CMN_Resetn
   Xil_Out32(0xFD410010,0x00000000);
   Xil_Out32(0xFD410014,0x00000000);
   
   unsigned int tmp_0_2_mod = (tmp_0_2 <<1) | (0x1); 
   tmp_0_2_mod = (tmp_0_2_mod <<4); 
   
   tmp_0_3 = tmp_0_3 >>3;
   Xil_Out32(0xFD40EC4C,tmp_0_3);

   //L3_TM_CALIB_DIG18
   Xil_Out32(0xFD40EC48,tmp_0_2_mod);
   return MaskStatus;


}

int serdes_enb_coarse_saturation() {
  //Enable PLL Coarse Code saturation Logic
   Xil_Out32(0xFD402094,0x00000010); 
   Xil_Out32(0xFD406094,0x00000010); 
   Xil_Out32(0xFD40A094,0x00000010); 
   Xil_Out32(0xFD40E094,0x00000010);
   return 1;
}

int init_serdes() {
	int status = 1;
	status &=  psu_resetin_init_data();

	status &= serdes_fixcal_code();
	status &= serdes_enb_coarse_saturation();

    status &=  psu_serdes_init_data();
	status &=  psu_resetout_init_data();

	return status;
}


void init_peripheral()
{
	unsigned int RegValue;

	/* Turn on IOU Clock */
	//Xil_Out32( CRL_APB_IOU_SWITCH_CTRL, 0x01001500);

	/* Release all resets in the IOU */
	Xil_Out32( CRL_APB_RST_LPD_IOU0, 0x00000000);
	Xil_Out32( CRL_APB_RST_LPD_IOU1, 0x00000000);
	Xil_Out32( CRL_APB_RST_LPD_IOU2, 0x00000000);

	/* Activate GPU clocks */
	//Xil_Out32(CRF_APB_GPU_REF_CTRL, 0x07001500);

	/* Take LPD out of reset except R5 */
	RegValue = Xil_In32(CRL_APB_RST_LPD_TOP);
	RegValue &= 0x7;
	Xil_Out32( CRL_APB_RST_LPD_TOP, RegValue);

	/* Take most of FPD out of reset */
	Xil_Out32( CRF_APB_RST_FPD_TOP, 0x00000000);

	/* Making DPDMA as secure */
  unsigned int tmp_regval; 
  tmp_regval = Xil_In32(0xFD690040);
  tmp_regval &= ~0x00000001;
  Xil_Out32(0xFD690040, tmp_regval);

	/* Making PCIe as secure */
  tmp_regval = Xil_In32(0xFD690030);
  tmp_regval &= ~0x00000001;
  Xil_Out32(0xFD690030, tmp_regval);
}

int psu_init_xppu_aper_ram() {
	unsigned long APER_OFFSET = 0xFF981000;
	int i = 0;
	for (; i <= 400; i++) {
		PSU_Mask_Write (APER_OFFSET ,0xF80FFFFFU ,0x08080000U);
		APER_OFFSET = APER_OFFSET + 0x4;
	}

	return 0;
}

int psu_lpd_protection() {
   psu_init_xppu_aper_ram();
   psu_lpd_xppu_data();
   return 0;
}

int psu_ddr_protection() {
   psu_ddr_xmpu0_data();
   psu_ddr_xmpu1_data();
   psu_ddr_xmpu2_data();
   psu_ddr_xmpu3_data();
   psu_ddr_xmpu4_data();
   psu_ddr_xmpu5_data();
   return 0;
}
int psu_ocm_protection() {
   psu_ocm_xmpu_data();
   return 0;
}

int psu_fpd_protection() {
   psu_fpd_xmpu_data();
   return 0;
}

int psu_protection_lock() {
  psu_protection_lock_data();
  return 0;
}

int psu_protection() {
  psu_ddr_protection(); 
  psu_ocm_protection(); 
  psu_fpd_protection(); 
  psu_lpd_protection(); 
  return 0;
}


int
psu_init() 
{
	int status = 1; 
	status &= psu_mio_init_data ();
	status &=   psu_pll_init_data ();
	status &=   psu_clock_init_data ();

	status &=  psu_ddr_init_data ();
	status &=  psu_ddr_phybringup_data ();
	status &=  psu_peripherals_init_data ();

	status &=  init_serdes();
	init_peripheral ();

	status &=  psu_peripherals_powerdwn_data ();
   
	if (status == 0) {
		return 1;
	}
	return 0;
}