/*
 * FreeRTOS Kernel V10.0.1
 * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://www.FreeRTOS.org
 * http://aws.amazon.com/freertos
 *
 * 1 tab == 4 spaces!
 */

/* CodeWarrior often thinks it knows better than you which files you want to 
build - and changes the port.c and portasm.S files included in the project from
the ColdFire V1 versions to the x86 versions.  If you get lots of errors output
when either file is compiled then delete the files from the project and then
add back in the port.c and portasm.S files that are located in the 
FreeRTOS\Source\portable\GCC\ColdFire_V2 directory.  Remove the line below
before compiling. */

#error Read the comment above this line, then delete this error statement!


#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H

#include "support_common.h"

/*-----------------------------------------------------------
 * Application specific definitions.
 *
 * These definitions should be adjusted for your particular hardware and
 * application requirements.
 *
 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
 *
 * See http://www.freertos.org/a00110.html.
 *----------------------------------------------------------*/

#define configUSE_PREEMPTION			1
#define configUSE_IDLE_HOOK				1
#define configUSE_TICK_HOOK				0
#define configCPU_CLOCK_HZ				( ( unsigned long ) 80000000 )
#define configTICK_RATE_HZ				( ( TickType_t ) 100 )
#define configMINIMAL_STACK_SIZE		( ( unsigned short ) 100 )
#define configTOTAL_HEAP_SIZE			( ( size_t ) ( 15000 ) )
#define configMAX_TASK_NAME_LEN			( 12 )
#define configUSE_TRACE_FACILITY		1
#define configUSE_16_BIT_TICKS			0
#define configIDLE_SHOULD_YIELD			0
#define configUSE_CO_ROUTINES 			1
#define configUSE_MUTEXES				1
#define configCHECK_FOR_STACK_OVERFLOW	2
#define configUSE_RECURSIVE_MUTEXES		1
#define configQUEUE_REGISTRY_SIZE		0
#define configUSE_COUNTING_SEMAPHORES	0

#define configMAX_PRIORITIES		( 6 )
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )

/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */

#define INCLUDE_vTaskPrioritySet			1
#define INCLUDE_uxTaskPriorityGet			1
#define INCLUDE_vTaskDelete					1
#define INCLUDE_vTaskCleanUpResources		0
#define INCLUDE_vTaskSuspend				1
#define INCLUDE_vTaskDelayUntil				1
#define INCLUDE_vTaskDelay					1
#define INCLUDE_uxTaskGetStackHighWaterMark	1

#define configYIELD_INTERRUPT_VECTOR			16UL
#define configKERNEL_INTERRUPT_PRIORITY 		1
#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	4

void vApplicationSetupInterrupts( void );

/* Ethernet configuration. */
#define configMAC_0	0x00
#define configMAC_1	0x04
#define configMAC_2	0x9F
#define configMAC_3	0x00
#define configMAC_4	0xAB
#define configMAC_5	0x2B

#define configIP_ADDR0	192
#define configIP_ADDR1	168
#define configIP_ADDR2	0
#define configIP_ADDR3	11

#define configGW_ADDR0	172
#define configGW_ADDR1	25
#define configGW_ADDR2	218
#define configGW_ADDR3	3

#define configNET_MASK0	255
#define configNET_MASK1	255
#define configNET_MASK2	255
#define configNET_MASK3	0

#define configNUM_FEC_TX_BUFFERS	2
#define configNUM_FEC_RX_BUFFERS	4
#define configFEC_BUFFER_SIZE		1520
#define configUSE_PROMISCUOUS_MODE	0
#define configETHERNET_INPUT_TASK_STACK_SIZE ( 320 )
#define configETHERNET_INPUT_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )

#define configPHY_ADDRESS	1

#if ( configFEC_BUFFER_SIZE & 0x0F ) != 0
	#error configFEC_BUFFER_SIZE must be a multiple of 16.
#endif

#endif /* FREERTOS_CONFIG_H */