| Definitions |
| ~~~~~~~~~~~ |
| |
| Userspace filesystem: |
| |
| A filesystem in which data and metadata are provided by an ordinary |
| userspace process. The filesystem can be accessed normally through |
| the kernel interface. |
| |
| Filesystem daemon: |
| |
| The process(es) providing the data and metadata of the filesystem. |
| |
| Non-privileged mount (or user mount): |
| |
| A userspace filesystem mounted by a non-privileged (non-root) user. |
| The filesystem daemon is running with the privileges of the mounting |
| user. NOTE: this is not the same as mounts allowed with the "user" |
| option in /etc/fstab, which is not discussed here. |
| |
| Filesystem connection: |
| |
| A connection between the filesystem daemon and the kernel. The |
| connection exists until either the daemon dies, or the filesystem is |
| umounted. Note that detaching (or lazy umounting) the filesystem |
| does _not_ break the connection, in this case it will exist until |
| the last reference to the filesystem is released. |
| |
| Mount owner: |
| |
| The user who does the mounting. |
| |
| User: |
| |
| The user who is performing filesystem operations. |
| |
| What is FUSE? |
| ~~~~~~~~~~~~~ |
| |
| FUSE is a userspace filesystem framework. It consists of a kernel |
| module (fuse.ko), a userspace library (libfuse.*) and a mount utility |
| (fusermount3). |
| |
| One of the most important features of FUSE is allowing secure, |
| non-privileged mounts. This opens up new possibilities for the use of |
| filesystems. A good example is sshfs: a secure network filesystem |
| using the sftp protocol. |
| |
| The userspace library and utilities are available from the FUSE |
| homepage: |
| |
| https://github.com/libfuse/libfuse/ |
| |
| Filesystem type |
| ~~~~~~~~~~~~~~~ |
| |
| The filesystem type given to mount(2) can be one of the following: |
| |
| 'fuse' |
| |
| This is the usual way to mount a FUSE filesystem. The first |
| argument of the mount system call may contain an arbitrary string, |
| which is not interpreted by the kernel. |
| |
| 'fuseblk' |
| |
| The filesystem is block device based. The first argument of the |
| mount system call is interpreted as the name of the device. |
| |
| Mount options |
| ~~~~~~~~~~~~~ |
| |
| See mount.fuse(8). |
| |
| Control filesystem |
| ~~~~~~~~~~~~~~~~~~ |
| |
| There's a control filesystem for FUSE, which can be mounted by: |
| |
| mount -t fusectl none /sys/fs/fuse/connections |
| |
| Mounting it under the '/sys/fs/fuse/connections' directory makes it |
| backwards compatible with earlier versions. |
| |
| Under the fuse control filesystem each connection has a directory |
| named by a unique number. |
| |
| For each connection the following files exist within this directory: |
| |
| 'waiting' |
| |
| The number of requests which are waiting to be transferred to |
| userspace or being processed by the filesystem daemon. If there is |
| no filesystem activity and 'waiting' is non-zero, then the |
| filesystem is hung or deadlocked. |
| |
| 'abort' |
| |
| Writing anything into this file will abort the filesystem |
| connection. This means that all waiting requests will be aborted an |
| error returned for all aborted and new requests. |
| |
| Only the owner of the mount may read or write these files. |
| |
| Interrupting filesystem operations |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| If a process issuing a FUSE filesystem request is interrupted, the |
| following will happen: |
| |
| 1) If the request is not yet sent to userspace AND the signal is |
| fatal (SIGKILL or unhandled fatal signal), then the request is |
| dequeued and returns immediately. |
| |
| 2) If the request is not yet sent to userspace AND the signal is not |
| fatal, then an 'interrupted' flag is set for the request. When |
| the request has been successfully transferred to userspace and |
| this flag is set, an INTERRUPT request is queued. |
| |
| 3) If the request is already sent to userspace, then an INTERRUPT |
| request is queued. |
| |
| INTERRUPT requests take precedence over other requests, so the |
| userspace filesystem will receive queued INTERRUPTs before any others. |
| |
| The userspace filesystem may ignore the INTERRUPT requests entirely, |
| or may honor them by sending a reply to the _original_ request, with |
| the error set to EINTR. |
| |
| It is also possible that there's a race between processing the |
| original request and it's INTERRUPT request. There are two possibilities: |
| |
| 1) The INTERRUPT request is processed before the original request is |
| processed |
| |
| 2) The INTERRUPT request is processed after the original request has |
| been answered |
| |
| If the filesystem cannot find the original request, it should wait for |
| some timeout and/or a number of new requests to arrive, after which it |
| should reply to the INTERRUPT request with an EAGAIN error. In case |
| 1) the INTERRUPT request will be requeued. In case 2) the INTERRUPT |
| reply will be ignored. |
| |
| Aborting a filesystem connection |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| It is possible to get into certain situations where the filesystem is |
| not responding. Reasons for this may be: |
| |
| a) Broken userspace filesystem implementation |
| |
| b) Network connection down |
| |
| c) Accidental deadlock |
| |
| d) Malicious deadlock |
| |
| (For more on c) and d) see later sections) |
| |
| In either of these cases it may be useful to abort the connection to |
| the filesystem. There are several ways to do this: |
| |
| - Kill the filesystem daemon. Works in case of a) and b) |
| |
| - Kill the filesystem daemon and all users of the filesystem. Works |
| in all cases except some malicious deadlocks |
| |
| - Use forced umount (umount -f). Works in all cases but only if |
| filesystem is still attached (it hasn't been lazy unmounted) |
| |
| - Abort filesystem through the FUSE control filesystem. Most |
| powerful method, always works. |
| |
| How do non-privileged mounts work? |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| Since the mount() system call is a privileged operation, a helper |
| program (fusermount3) is needed, which is installed setuid root. |
| |
| The implication of providing non-privileged mounts is that the mount |
| owner must not be able to use this capability to compromise the |
| system. Obvious requirements arising from this are: |
| |
| A) mount owner should not be able to get elevated privileges with the |
| help of the mounted filesystem |
| |
| B) mount owner should not get illegitimate access to information from |
| other users' and the super user's processes |
| |
| C) mount owner should not be able to induce undesired behavior in |
| other users' or the super user's processes |
| |
| How are requirements fulfilled? |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| A) The mount owner could gain elevated privileges by either: |
| |
| 1) creating a filesystem containing a device file, then opening |
| this device |
| |
| 2) creating a filesystem containing a suid or sgid application, |
| then executing this application |
| |
| The solution is not to allow opening device files and ignore |
| setuid and setgid bits when executing programs. To ensure this |
| fusermount3 always adds "nosuid" and "nodev" to the mount options |
| for non-privileged mounts. |
| |
| B) If another user is accessing files or directories in the |
| filesystem, the filesystem daemon serving requests can record the |
| exact sequence and timing of operations performed. This |
| information is otherwise inaccessible to the mount owner, so this |
| counts as an information leak. |
| |
| The solution to this problem will be presented in point 2) of C). |
| |
| C) There are several ways in which the mount owner can induce |
| undesired behavior in other users' processes, such as: |
| |
| 1) mounting a filesystem over a file or directory which the mount |
| owner could otherwise not be able to modify (or could only |
| make limited modifications). |
| |
| This is solved in fusermount3, by checking the access |
| permissions on the mountpoint and only allowing the mount if |
| the mount owner can do unlimited modification (has write |
| access to the mountpoint, and mountpoint is not a "sticky" |
| directory) |
| |
| 2) Even if 1) is solved the mount owner can change the behavior |
| of other users' processes. |
| |
| i) It can slow down or indefinitely delay the execution of a |
| filesystem operation creating a DoS against the user or the |
| whole system. For example a suid application locking a |
| system file, and then accessing a file on the mount owner's |
| filesystem could be stopped, and thus causing the system |
| file to be locked forever. |
| |
| ii) It can present files or directories of unlimited length, or |
| directory structures of unlimited depth, possibly causing a |
| system process to eat up diskspace, memory or other |
| resources, again causing DoS. |
| |
| The solution to this as well as B) is not to allow processes |
| to access the filesystem, which could otherwise not be |
| monitored or manipulated by the mount owner. Since if the |
| mount owner can ptrace a process, it can do all of the above |
| without using a FUSE mount, the same criteria as used in |
| ptrace can be used to check if a process is allowed to access |
| the filesystem or not. |
| |
| Note that the ptrace check is not strictly necessary to |
| prevent B/2/i, it is enough to check if mount owner has enough |
| privilege to send signal to the process accessing the |
| filesystem, since SIGSTOP can be used to get a similar effect. |
| |
| I think these limitations are unacceptable? |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| If a sysadmin trusts the users enough, or can ensure through other |
| measures, that system processes will never enter non-privileged |
| mounts, it can relax the last limitation with a "user_allow_other" |
| config option. If this config option is set, the mounting user can |
| add the "allow_other" mount option which disables the check for other |
| users' processes. |
| |
| Kernel - userspace interface |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| The following diagram shows how a filesystem operation (in this |
| example unlink) is performed in FUSE. |
| |
| NOTE: everything in this description is greatly simplified |
| |
| | "rm /mnt/fuse/file" | FUSE filesystem daemon |
| | | |
| | | >sys_read() |
| | | >fuse_dev_read() |
| | | >request_wait() |
| | | [sleep on fc->waitq] |
| | | |
| | >sys_unlink() | |
| | >fuse_unlink() | |
| | [get request from | |
| | fc->unused_list] | |
| | >request_send() | |
| | [queue req on fc->pending] | |
| | [wake up fc->waitq] | [woken up] |
| | >request_wait_answer() | |
| | [sleep on req->waitq] | |
| | | <request_wait() |
| | | [remove req from fc->pending] |
| | | [copy req to read buffer] |
| | | [add req to fc->processing] |
| | | <fuse_dev_read() |
| | | <sys_read() |
| | | |
| | | [perform unlink] |
| | | |
| | | >sys_write() |
| | | >fuse_dev_write() |
| | | [look up req in fc->processing] |
| | | [remove from fc->processing] |
| | | [copy write buffer to req] |
| | [woken up] | [wake up req->waitq] |
| | | <fuse_dev_write() |
| | | <sys_write() |
| | <request_wait_answer() | |
| | <request_send() | |
| | [add request to | |
| | fc->unused_list] | |
| | <fuse_unlink() | |
| | <sys_unlink() | |
| |
| There are a couple of ways in which to deadlock a FUSE filesystem. |
| Since we are talking about unprivileged userspace programs, |
| something must be done about these. |
| |
| Scenario 1 - Simple deadlock |
| ----------------------------- |
| |
| | "rm /mnt/fuse/file" | FUSE filesystem daemon |
| | | |
| | >sys_unlink("/mnt/fuse/file") | |
| | [acquire inode semaphore | |
| | for "file"] | |
| | >fuse_unlink() | |
| | [sleep on req->waitq] | |
| | | <sys_read() |
| | | >sys_unlink("/mnt/fuse/file") |
| | | [acquire inode semaphore |
| | | for "file"] |
| | | *DEADLOCK* |
| |
| The solution for this is to allow the filesystem to be aborted. |
| |
| Scenario 2 - Tricky deadlock |
| ---------------------------- |
| |
| This one needs a carefully crafted filesystem. It's a variation on |
| the above, only the call back to the filesystem is not explicit, |
| but is caused by a pagefault. |
| |
| | Kamikaze filesystem thread 1 | Kamikaze filesystem thread 2 |
| | | |
| | [fd = open("/mnt/fuse/file")] | [request served normally] |
| | [mmap fd to 'addr'] | |
| | [close fd] | [FLUSH triggers 'magic' flag] |
| | [read a byte from addr] | |
| | >do_page_fault() | |
| | [find or create page] | |
| | [lock page] | |
| | >fuse_readpage() | |
| | [queue READ request] | |
| | [sleep on req->waitq] | |
| | | [read request to buffer] |
| | | [create reply header before addr] |
| | | >sys_write(addr - headerlength) |
| | | >fuse_dev_write() |
| | | [look up req in fc->processing] |
| | | [remove from fc->processing] |
| | | [copy write buffer to req] |
| | | >do_page_fault() |
| | | [find or create page] |
| | | [lock page] |
| | | * DEADLOCK * |
| |
| Solution is basically the same as above. |
| |
| An additional problem is that while the write buffer is being copied |
| to the request, the request must not be interrupted/aborted. This is |
| because the destination address of the copy may not be valid after the |
| request has returned. |
| |
| This is solved with doing the copy atomically, and allowing abort |
| while the page(s) belonging to the write buffer are faulted with |
| get_user_pages(). The 'req->locked' flag indicates when the copy is |
| taking place, and abort is delayed until this flag is unset. |