/*
 * Copyright (c) 2010 Broadcom Corporation
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <wlc_cfg.h>

#ifdef WLANTSEL

#include <linux/kernel.h>
#include <linuxver.h>
#include <bcmdefs.h>
#include <osl.h>
#include <bcmutils.h>
#include <siutils.h>
#include <wlioctl.h>

#include <d11.h>
#include <wlc_rate.h>
#include <wlc_key.h>
#include <wlc_pub.h>
#include <wl_dbg.h>
#include <wlc_mac80211.h>
#include <wlc_bmac.h>
#include <wlc_phy_hal.h>
#include <wl_export.h>
#include <wlc_antsel.h>
#include <wlc_phy_shim.h>

/* useful macros */
#define WLC_ANTSEL_11N_0(ant)	((((ant) & ANT_SELCFG_MASK) >> 4) & 0xf)
#define WLC_ANTSEL_11N_1(ant)	(((ant) & ANT_SELCFG_MASK) & 0xf)
#define WLC_ANTIDX_11N(ant)	(((WLC_ANTSEL_11N_0(ant)) << 2) + (WLC_ANTSEL_11N_1(ant)))
#define WLC_ANT_ISAUTO_11N(ant)	(((ant) & ANT_SELCFG_AUTO) == ANT_SELCFG_AUTO)
#define WLC_ANTSEL_11N(ant)	((ant) & ANT_SELCFG_MASK)

/* antenna switch */
/* defines for no boardlevel antenna diversity */
#define ANT_SELCFG_DEF_2x2	0x01	/* default antenna configuration */

/* 2x3 antdiv defines and tables for GPIO communication */
#define ANT_SELCFG_NUM_2x3	3
#define ANT_SELCFG_DEF_2x3	0x01	/* default antenna configuration */

/* 2x4 antdiv rev4 defines and tables for GPIO communication */
#define ANT_SELCFG_NUM_2x4	4
#define ANT_SELCFG_DEF_2x4	0x02	/* default antenna configuration */

/* static functions */
static int wlc_antsel_cfgupd(antsel_info_t *asi, wlc_antselcfg_t *antsel);
static u8 wlc_antsel_id2antcfg(antsel_info_t *asi, u8 id);
static u16 wlc_antsel_antcfg2antsel(antsel_info_t *asi, u8 ant_cfg);
static void wlc_antsel_init_cfg(antsel_info_t *asi, wlc_antselcfg_t *antsel,
				bool auto_sel);

const u16 mimo_2x4_div_antselpat_tbl[] = {
	0, 0, 0x9, 0xa,		/* ant0: 0 ant1: 2,3 */
	0, 0, 0x5, 0x6,		/* ant0: 1 ant1: 2,3 */
	0, 0, 0, 0,		/* n.a.              */
	0, 0, 0, 0		/* n.a.              */
};

const u8 mimo_2x4_div_antselid_tbl[16] = {
	0, 0, 0, 0, 0, 2, 3, 0,
	0, 0, 1, 0, 0, 0, 0, 0	/* pat to antselid */
};

const u16 mimo_2x3_div_antselpat_tbl[] = {
	16, 0, 1, 16,		/* ant0: 0 ant1: 1,2 */
	16, 16, 16, 16,		/* n.a.              */
	16, 2, 16, 16,		/* ant0: 2 ant1: 1   */
	16, 16, 16, 16		/* n.a.              */
};

const u8 mimo_2x3_div_antselid_tbl[16] = {
	0, 1, 2, 0, 0, 0, 0, 0,
	0, 0, 0, 0, 0, 0, 0, 0	/* pat to antselid */
};

antsel_info_t *wlc_antsel_attach(wlc_info_t *wlc, osl_t *osh,
						  wlc_pub_t *pub,
						  wlc_hw_info_t *wlc_hw) {
	antsel_info_t *asi;

	asi = kzalloc(sizeof(antsel_info_t), GFP_ATOMIC);
	if (!asi) {
		WL_ERROR(("wl%d: wlc_antsel_attach: out of mem\n", pub->unit));
		return NULL;
	}

	asi->wlc = wlc;
	asi->pub = pub;
	asi->antsel_type = ANTSEL_NA;
	asi->antsel_avail = false;
	asi->antsel_antswitch = (u8) getintvar(asi->pub->vars, "antswitch");

	if ((asi->pub->sromrev >= 4) && (asi->antsel_antswitch != 0)) {
		switch (asi->antsel_antswitch) {
		case ANTSWITCH_TYPE_1:
		case ANTSWITCH_TYPE_2:
		case ANTSWITCH_TYPE_3:
			/* 4321/2 board with 2x3 switch logic */
			asi->antsel_type = ANTSEL_2x3;
			/* Antenna selection availability */
			if (((u16) getintvar(asi->pub->vars, "aa2g") == 7) ||
			    ((u16) getintvar(asi->pub->vars, "aa5g") == 7)) {
				asi->antsel_avail = true;
			} else
			    if (((u16) getintvar(asi->pub->vars, "aa2g") ==
				 3)
				|| ((u16) getintvar(asi->pub->vars, "aa5g")
				    == 3)) {
				asi->antsel_avail = false;
			} else {
				asi->antsel_avail = false;
				WL_ERROR(("wlc_antsel_attach: 2o3 board cfg invalid\n"));
				ASSERT(0);
			}
			break;
		default:
			break;
		}
	} else if ((asi->pub->sromrev == 4) &&
		   ((u16) getintvar(asi->pub->vars, "aa2g") == 7) &&
		   ((u16) getintvar(asi->pub->vars, "aa5g") == 0)) {
		/* hack to match old 4321CB2 cards with 2of3 antenna switch */
		asi->antsel_type = ANTSEL_2x3;
		asi->antsel_avail = true;
	} else if (asi->pub->boardflags2 & BFL2_2X4_DIV) {
		asi->antsel_type = ANTSEL_2x4;
		asi->antsel_avail = true;
	}

	/* Set the antenna selection type for the low driver */
	wlc_bmac_antsel_type_set(wlc_hw, asi->antsel_type);

	/* Init (auto/manual) antenna selection */
	wlc_antsel_init_cfg(asi, &asi->antcfg_11n, true);
	wlc_antsel_init_cfg(asi, &asi->antcfg_cur, true);

	return asi;
}

void wlc_antsel_detach(antsel_info_t *asi)
{
	if (!asi)
		return;

	kfree(asi);
}

void wlc_antsel_init(antsel_info_t *asi)
{
	if ((asi->antsel_type == ANTSEL_2x3) ||
	    (asi->antsel_type == ANTSEL_2x4))
		wlc_antsel_cfgupd(asi, &asi->antcfg_11n);
}

/* boardlevel antenna selection: init antenna selection structure */
static void
wlc_antsel_init_cfg(antsel_info_t *asi, wlc_antselcfg_t *antsel,
		    bool auto_sel)
{
	if (asi->antsel_type == ANTSEL_2x3) {
		u8 antcfg_def = ANT_SELCFG_DEF_2x3 |
		    ((asi->antsel_avail && auto_sel) ? ANT_SELCFG_AUTO : 0);
		antsel->ant_config[ANT_SELCFG_TX_DEF] = antcfg_def;
		antsel->ant_config[ANT_SELCFG_TX_UNICAST] = antcfg_def;
		antsel->ant_config[ANT_SELCFG_RX_DEF] = antcfg_def;
		antsel->ant_config[ANT_SELCFG_RX_UNICAST] = antcfg_def;
		antsel->num_antcfg = ANT_SELCFG_NUM_2x3;

	} else if (asi->antsel_type == ANTSEL_2x4) {

		antsel->ant_config[ANT_SELCFG_TX_DEF] = ANT_SELCFG_DEF_2x4;
		antsel->ant_config[ANT_SELCFG_TX_UNICAST] = ANT_SELCFG_DEF_2x4;
		antsel->ant_config[ANT_SELCFG_RX_DEF] = ANT_SELCFG_DEF_2x4;
		antsel->ant_config[ANT_SELCFG_RX_UNICAST] = ANT_SELCFG_DEF_2x4;
		antsel->num_antcfg = ANT_SELCFG_NUM_2x4;

	} else {		/* no antenna selection available */

		antsel->ant_config[ANT_SELCFG_TX_DEF] = ANT_SELCFG_DEF_2x2;
		antsel->ant_config[ANT_SELCFG_TX_UNICAST] = ANT_SELCFG_DEF_2x2;
		antsel->ant_config[ANT_SELCFG_RX_DEF] = ANT_SELCFG_DEF_2x2;
		antsel->ant_config[ANT_SELCFG_RX_UNICAST] = ANT_SELCFG_DEF_2x2;
		antsel->num_antcfg = 0;
	}
}

void BCMFASTPATH
wlc_antsel_antcfg_get(antsel_info_t *asi, bool usedef, bool sel,
		      u8 antselid, u8 fbantselid, u8 *antcfg,
		      u8 *fbantcfg)
{
	u8 ant;

	/* if use default, assign it and return */
	if (usedef) {
		*antcfg = asi->antcfg_11n.ant_config[ANT_SELCFG_TX_DEF];
		*fbantcfg = *antcfg;
		return;
	}

	if (!sel) {
		*antcfg = asi->antcfg_11n.ant_config[ANT_SELCFG_TX_UNICAST];
		*fbantcfg = *antcfg;

	} else {
		ant = asi->antcfg_11n.ant_config[ANT_SELCFG_TX_UNICAST];
		if ((ant & ANT_SELCFG_AUTO) == ANT_SELCFG_AUTO) {
			*antcfg = wlc_antsel_id2antcfg(asi, antselid);
			*fbantcfg = wlc_antsel_id2antcfg(asi, fbantselid);
		} else {
			*antcfg =
			    asi->antcfg_11n.ant_config[ANT_SELCFG_TX_UNICAST];
			*fbantcfg = *antcfg;
		}
	}
	return;
}

/* boardlevel antenna selection: convert mimo_antsel (ucode interface) to id */
u8 wlc_antsel_antsel2id(antsel_info_t *asi, u16 antsel)
{
	u8 antselid = 0;

	if (asi->antsel_type == ANTSEL_2x4) {
		/* 2x4 antenna diversity board, 4 cfgs: 0-2 0-3 1-2 1-3 */
		antselid = mimo_2x4_div_antselid_tbl[(antsel & 0xf)];
		return antselid;

	} else if (asi->antsel_type == ANTSEL_2x3) {
		/* 2x3 antenna selection, 3 cfgs: 0-1 0-2 2-1 */
		antselid = mimo_2x3_div_antselid_tbl[(antsel & 0xf)];
		return antselid;
	}

	return antselid;
}

/* boardlevel antenna selection: convert id to ant_cfg */
static u8 wlc_antsel_id2antcfg(antsel_info_t *asi, u8 id)
{
	u8 antcfg = ANT_SELCFG_DEF_2x2;

	if (asi->antsel_type == ANTSEL_2x4) {
		/* 2x4 antenna diversity board, 4 cfgs: 0-2 0-3 1-2 1-3 */
		antcfg = (((id & 0x2) << 3) | ((id & 0x1) + 2));
		return antcfg;

	} else if (asi->antsel_type == ANTSEL_2x3) {
		/* 2x3 antenna selection, 3 cfgs: 0-1 0-2 2-1 */
		antcfg = (((id & 0x02) << 4) | ((id & 0x1) + 1));
		return antcfg;
	}

	return antcfg;
}

/* boardlevel antenna selection: convert ant_cfg to mimo_antsel (ucode interface) */
static u16 wlc_antsel_antcfg2antsel(antsel_info_t *asi, u8 ant_cfg)
{
	u8 idx = WLC_ANTIDX_11N(WLC_ANTSEL_11N(ant_cfg));
	u16 mimo_antsel = 0;

	if (asi->antsel_type == ANTSEL_2x4) {
		/* 2x4 antenna diversity board, 4 cfgs: 0-2 0-3 1-2 1-3 */
		mimo_antsel = (mimo_2x4_div_antselpat_tbl[idx] & 0xf);
		return mimo_antsel;

	} else if (asi->antsel_type == ANTSEL_2x3) {
		/* 2x3 antenna selection, 3 cfgs: 0-1 0-2 2-1 */
		mimo_antsel = (mimo_2x3_div_antselpat_tbl[idx] & 0xf);
		return mimo_antsel;
	}

	return mimo_antsel;
}

/* boardlevel antenna selection: ucode interface control */
static int wlc_antsel_cfgupd(antsel_info_t *asi, wlc_antselcfg_t *antsel)
{
	wlc_info_t *wlc = asi->wlc;
	u8 ant_cfg;
	u16 mimo_antsel;

	ASSERT(asi->antsel_type != ANTSEL_NA);

	/* 1) Update TX antconfig for all frames that are not unicast data
	 *    (aka default TX)
	 */
	ant_cfg = antsel->ant_config[ANT_SELCFG_TX_DEF];
	mimo_antsel = wlc_antsel_antcfg2antsel(asi, ant_cfg);
	wlc_write_shm(wlc, M_MIMO_ANTSEL_TXDFLT, mimo_antsel);
	/* Update driver stats for currently selected default tx/rx antenna config */
	asi->antcfg_cur.ant_config[ANT_SELCFG_TX_DEF] = ant_cfg;

	/* 2) Update RX antconfig for all frames that are not unicast data
	 *    (aka default RX)
	 */
	ant_cfg = antsel->ant_config[ANT_SELCFG_RX_DEF];
	mimo_antsel = wlc_antsel_antcfg2antsel(asi, ant_cfg);
	wlc_write_shm(wlc, M_MIMO_ANTSEL_RXDFLT, mimo_antsel);
	/* Update driver stats for currently selected default tx/rx antenna config */
	asi->antcfg_cur.ant_config[ANT_SELCFG_RX_DEF] = ant_cfg;

	return 0;
}

#endif				/* WLANTSEL */