/*
 * lirc_igorplugusb - USB remote support for LIRC
 *
 * Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware.
 * See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm
 *
 * The device can only record bursts of up to 36 pulses/spaces.
 * Works fine with RC5. Longer commands lead to device buffer overrun.
 * (Maybe a better firmware or a microcontroller with more ram can help?)
 *
 * Version 0.1  [beta status]
 *
 * Copyright (C) 2004 Jan M. Hochstein
 *	<hochstein@algo.informatik.tu-darmstadt.de>
 *
 * This driver was derived from:
 *   Paul Miller <pmiller9@users.sourceforge.net>
 *      "lirc_atiusb" module
 *   Vladimir Dergachev <volodya@minspring.com>'s 2002
 *      "USB ATI Remote support" (input device)
 *   Adrian Dewhurst <sailor-lk@sailorfrag.net>'s 2002
 *      "USB StreamZap remote driver" (LIRC)
 *   Artur Lipowski <alipowski@kki.net.pl>'s 2002
 *      "lirc_dev" and "lirc_gpio" LIRC modules
 */

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/kmod.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/usb.h>
#include <linux/time.h>

#include <media/lirc.h>
#include <media/lirc_dev.h>


/* module identification */
#define DRIVER_VERSION		"0.2"
#define DRIVER_AUTHOR		\
	"Jan M. Hochstein <hochstein@algo.informatik.tu-darmstadt.de>"
#define DRIVER_DESC		"Igorplug USB remote driver for LIRC"
#define DRIVER_NAME		"lirc_igorplugusb"

/* debugging support */
#ifdef CONFIG_USB_DEBUG
static int debug = 1;
#else
static int debug;
#endif

#define dprintk(fmt, args...)					\
	do {							\
		if (debug)					\
			printk(KERN_DEBUG fmt, ## args);	\
	} while (0)

/* One mode2 pulse/space has 4 bytes. */
#define CODE_LENGTH	     sizeof(int)

/* Igor's firmware cannot record bursts longer than 36. */
#define DEVICE_BUFLEN	   36

/*
 * Header at the beginning of the device's buffer:
 *	unsigned char data_length
 *	unsigned char data_start    (!=0 means ring-buffer overrun)
 *	unsigned char counter       (incremented by each burst)
 */
#define DEVICE_HEADERLEN	3

/* This is for the gap */
#define ADDITIONAL_LIRC_BYTES   2

/* times to poll per second */
#define SAMPLE_RATE	     100
static int sample_rate = SAMPLE_RATE;


/**** Igor's USB Request Codes */

#define SET_INFRABUFFER_EMPTY   1
/**
 * Params: none
 * Answer: empty
 */

#define GET_INFRACODE	   2
/**
 * Params:
 *   wValue: offset to begin reading infra buffer
 *
 * Answer: infra data
 */

#define SET_DATAPORT_DIRECTION  3
/**
 * Params:
 *   wValue: (byte) 1 bit for each data port pin (0=in, 1=out)
 *
 * Answer: empty
 */

#define GET_DATAPORT_DIRECTION  4
/**
 * Params: none
 *
 * Answer: (byte) 1 bit for each data port pin (0=in, 1=out)
 */

#define SET_OUT_DATAPORT	5
/**
 * Params:
 *   wValue: byte to write to output data port
 *
 * Answer: empty
 */

#define GET_OUT_DATAPORT	6
/**
 * Params: none
 *
 * Answer: least significant 3 bits read from output data port
 */

#define GET_IN_DATAPORT	 7
/**
 * Params: none
 *
 * Answer: least significant 3 bits read from input data port
 */

#define READ_EEPROM	     8
/**
 * Params:
 *   wValue: offset to begin reading EEPROM
 *
 * Answer: EEPROM bytes
 */

#define WRITE_EEPROM	    9
/**
 * Params:
 *   wValue: offset to EEPROM byte
 *   wIndex: byte to write
 *
 * Answer: empty
 */

#define SEND_RS232	      10
/**
 * Params:
 *   wValue: byte to send
 *
 * Answer: empty
 */

#define RECV_RS232	      11
/**
 * Params: none
 *
 * Answer: byte received
 */

#define SET_RS232_BAUD	  12
/**
 * Params:
 *   wValue: byte to write to UART bit rate register (UBRR)
 *
 * Answer: empty
 */

#define GET_RS232_BAUD	  13
/**
 * Params: none
 *
 * Answer: byte read from UART bit rate register (UBRR)
 */


/* data structure for each usb remote */
struct igorplug {

	/* usb */
	struct usb_device *usbdev;
	int devnum;

	unsigned char *buf_in;
	unsigned int len_in;
	int in_space;
	struct timeval last_time;

	dma_addr_t dma_in;

	/* lirc */
	struct lirc_driver *d;

	/* handle sending (init strings) */
	int send_flags;
};

static int unregister_from_lirc(struct igorplug *ir)
{
	struct lirc_driver *d;
	int devnum;

	if (!ir) {
		printk(KERN_ERR "%s: called with NULL device struct!\n",
		       __func__);
		return -EINVAL;
	}

	devnum = ir->devnum;
	d = ir->d;

	if (!d) {
		printk(KERN_ERR "%s: called with NULL lirc driver struct!\n",
		       __func__);
		return -EINVAL;
	}

	dprintk(DRIVER_NAME "[%d]: calling lirc_unregister_driver\n", devnum);
	lirc_unregister_driver(d->minor);

	kfree(d);
	ir->d = NULL;
	kfree(ir);

	return devnum;
}

static int set_use_inc(void *data)
{
	struct igorplug *ir = data;

	if (!ir) {
		printk(DRIVER_NAME "[?]: set_use_inc called with no context\n");
		return -EIO;
	}

	dprintk(DRIVER_NAME "[%d]: set use inc\n", ir->devnum);

	if (!ir->usbdev)
		return -ENODEV;

	return 0;
}

static void set_use_dec(void *data)
{
	struct igorplug *ir = data;

	if (!ir) {
		printk(DRIVER_NAME "[?]: set_use_dec called with no context\n");
		return;
	}

	dprintk(DRIVER_NAME "[%d]: set use dec\n", ir->devnum);
}

static void send_fragment(struct igorplug *ir, struct lirc_buffer *buf,
			   int i, int max)
{
	int code;

	/* MODE2: pulse/space (PULSE_BIT) in 1us units */
	while (i < max) {
		/* 1 Igor-tick = 85.333333 us */
		code = (unsigned int)ir->buf_in[i] * 85 +
			(unsigned int)ir->buf_in[i] / 3;
		ir->last_time.tv_usec += code;
		if (ir->in_space)
			code |= PULSE_BIT;
		lirc_buffer_write(buf, (unsigned char *)&code);
		/* 1 chunk = CODE_LENGTH bytes */
		ir->in_space ^= 1;
		++i;
	}
}

/**
 * Called in user context.
 * return 0 if data was added to the buffer and
 * -ENODATA if none was available. This should add some number of bits
 * evenly divisible by code_length to the buffer
 */
static int igorplugusb_remote_poll(void *data, struct lirc_buffer *buf)
{
	int ret;
	struct igorplug *ir = (struct igorplug *)data;

	if (!ir || !ir->usbdev)  /* Has the device been removed? */
		return -ENODEV;

	memset(ir->buf_in, 0, ir->len_in);

	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
			      GET_INFRACODE, USB_TYPE_VENDOR | USB_DIR_IN,
			      0/* offset */, /*unused*/0,
			      ir->buf_in, ir->len_in,
			      /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
	if (ret > 0) {
		int code, timediff;
		struct timeval now;

		/* ACK packet has 1 byte --> ignore */
		if (ret < DEVICE_HEADERLEN)
			return -ENODATA;

		dprintk(DRIVER_NAME ": Got %d bytes. Header: %02x %02x %02x\n",
			ret, ir->buf_in[0], ir->buf_in[1], ir->buf_in[2]);

		do_gettimeofday(&now);
		timediff = now.tv_sec - ir->last_time.tv_sec;
		if (timediff + 1 > PULSE_MASK / 1000000)
			timediff = PULSE_MASK;
		else {
			timediff *= 1000000;
			timediff += now.tv_usec - ir->last_time.tv_usec;
		}
		ir->last_time.tv_sec = now.tv_sec;
		ir->last_time.tv_usec = now.tv_usec;

		/* create leading gap  */
		code = timediff;
		lirc_buffer_write(buf, (unsigned char *)&code);
		ir->in_space = 1;   /* next comes a pulse */

		if (ir->buf_in[2] == 0)
			send_fragment(ir, buf, DEVICE_HEADERLEN, ret);
		else {
			printk(KERN_WARNING DRIVER_NAME
			       "[%d]: Device buffer overrun.\n", ir->devnum);
			/* HHHNNNNNNNNNNNOOOOOOOO H = header
			      <---[2]--->         N = newer
			   <---------ret--------> O = older */
			ir->buf_in[2] %= ret - DEVICE_HEADERLEN; /* sanitize */
			/* keep even-ness to not desync pulse/pause */
			send_fragment(ir, buf, DEVICE_HEADERLEN +
				      ir->buf_in[2] - (ir->buf_in[2] & 1), ret);
			send_fragment(ir, buf, DEVICE_HEADERLEN,
				      DEVICE_HEADERLEN + ir->buf_in[2]);
		}

		ret = usb_control_msg(
		      ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
		      SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
		      /*unused*/0, /*unused*/0,
		      /*dummy*/ir->buf_in, /*dummy*/ir->len_in,
		      /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
		if (ret < 0)
			printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: "
			       "error %d\n", ir->devnum, ret);
		return 0;
	} else if (ret < 0)
		printk(DRIVER_NAME "[%d]: GET_INFRACODE: error %d\n",
			ir->devnum, ret);

	return -ENODATA;
}


static int igorplugusb_remote_probe(struct usb_interface *intf,
				    const struct usb_device_id *id)
{
	struct usb_device *dev = NULL;
	struct usb_host_interface *idesc = NULL;
	struct usb_endpoint_descriptor *ep;
	struct igorplug *ir = NULL;
	struct lirc_driver *driver = NULL;
	int devnum, pipe, maxp;
	int minor = 0;
	char buf[63], name[128] = "";
	int mem_failure = 0;
	int ret;

	dprintk(DRIVER_NAME ": usb probe called.\n");

	dev = interface_to_usbdev(intf);

	idesc = intf->cur_altsetting;

	if (idesc->desc.bNumEndpoints != 1)
		return -ENODEV;

	ep = &idesc->endpoint->desc;
	if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
	    != USB_DIR_IN)
	    || (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
	    != USB_ENDPOINT_XFER_CONTROL)
		return -ENODEV;

	pipe = usb_rcvctrlpipe(dev, ep->bEndpointAddress);
	devnum = dev->devnum;
	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));

	dprintk(DRIVER_NAME "[%d]: bytes_in_key=%zu maxp=%d\n",
		devnum, CODE_LENGTH, maxp);

	mem_failure = 0;
	ir = kzalloc(sizeof(struct igorplug), GFP_KERNEL);
	if (!ir) {
		mem_failure = 1;
		goto mem_failure_switch;
	}
	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
	if (!driver) {
		mem_failure = 2;
		goto mem_failure_switch;
	}

	ir->buf_in = usb_alloc_coherent(dev, DEVICE_BUFLEN + DEVICE_HEADERLEN,
					GFP_ATOMIC, &ir->dma_in);
	if (!ir->buf_in) {
		mem_failure = 3;
		goto mem_failure_switch;
	}

	strcpy(driver->name, DRIVER_NAME " ");
	driver->minor = -1;
	driver->code_length = CODE_LENGTH * 8; /* in bits */
	driver->features = LIRC_CAN_REC_MODE2;
	driver->data = ir;
	driver->chunk_size = CODE_LENGTH;
	driver->buffer_size = DEVICE_BUFLEN + ADDITIONAL_LIRC_BYTES;
	driver->set_use_inc = &set_use_inc;
	driver->set_use_dec = &set_use_dec;
	driver->sample_rate = sample_rate;    /* per second */
	driver->add_to_buf = &igorplugusb_remote_poll;
	driver->dev = &intf->dev;
	driver->owner = THIS_MODULE;

	minor = lirc_register_driver(driver);
	if (minor < 0)
		mem_failure = 9;

mem_failure_switch:

	switch (mem_failure) {
	case 9:
		usb_free_coherent(dev, DEVICE_BUFLEN + DEVICE_HEADERLEN,
			ir->buf_in, ir->dma_in);
	case 3:
		kfree(driver);
	case 2:
		kfree(ir);
	case 1:
		printk(DRIVER_NAME "[%d]: out of memory (code=%d)\n",
			devnum, mem_failure);
		return -ENOMEM;
	}

	driver->minor = minor;
	ir->d = driver;
	ir->devnum = devnum;
	ir->usbdev = dev;
	ir->len_in = DEVICE_BUFLEN + DEVICE_HEADERLEN;
	ir->in_space = 1; /* First mode2 event is a space. */
	do_gettimeofday(&ir->last_time);

	if (dev->descriptor.iManufacturer
	    && usb_string(dev, dev->descriptor.iManufacturer,
			  buf, sizeof(buf)) > 0)
		strlcpy(name, buf, sizeof(name));
	if (dev->descriptor.iProduct
	    && usb_string(dev, dev->descriptor.iProduct, buf, sizeof(buf)) > 0)
		snprintf(name + strlen(name), sizeof(name) - strlen(name),
			 " %s", buf);
	printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name,
	       dev->bus->busnum, devnum);

	/* clear device buffer */
	ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
		SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
		/*unused*/0, /*unused*/0,
		/*dummy*/ir->buf_in, /*dummy*/ir->len_in,
		/*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
	if (ret < 0)
		printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n",
			devnum, ret);

	usb_set_intfdata(intf, ir);
	return 0;
}


static void igorplugusb_remote_disconnect(struct usb_interface *intf)
{
	struct usb_device *usbdev = interface_to_usbdev(intf);
	struct igorplug *ir = usb_get_intfdata(intf);
	struct device *dev = &intf->dev;
	int devnum;

	usb_set_intfdata(intf, NULL);

	if (!ir || !ir->d)
		return;

	ir->usbdev = NULL;

	usb_free_coherent(usbdev, ir->len_in, ir->buf_in, ir->dma_in);

	devnum = unregister_from_lirc(ir);

	dev_info(dev, DRIVER_NAME "[%d]: %s done\n", devnum, __func__);
}

static struct usb_device_id igorplugusb_remote_id_table[] = {
	/* Igor Plug USB (Atmel's Manufact. ID) */
	{ USB_DEVICE(0x03eb, 0x0002) },
	/* Fit PC2 Infrared Adapter */
	{ USB_DEVICE(0x03eb, 0x21fe) },

	/* Terminating entry */
	{ }
};

static struct usb_driver igorplugusb_remote_driver = {
	.name =		DRIVER_NAME,
	.probe =	igorplugusb_remote_probe,
	.disconnect =	igorplugusb_remote_disconnect,
	.id_table =	igorplugusb_remote_id_table
};

static int __init igorplugusb_remote_init(void)
{
	int ret = 0;

	dprintk(DRIVER_NAME ": loaded, debug mode enabled\n");

	ret = usb_register(&igorplugusb_remote_driver);
	if (ret)
		printk(KERN_ERR DRIVER_NAME ": usb register failed!\n");

	return ret;
}

static void __exit igorplugusb_remote_exit(void)
{
	usb_deregister(&igorplugusb_remote_driver);
}

module_init(igorplugusb_remote_init);
module_exit(igorplugusb_remote_exit);

#include <linux/vermagic.h>
MODULE_INFO(vermagic, VERMAGIC_STRING);

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(usb, igorplugusb_remote_id_table);

module_param(sample_rate, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(sample_rate, "Sampling rate in Hz (default: 100)");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");