| ## automake - create Makefile.in from Makefile.am |
| ## Copyright (C) 2001-2013 Free Software Foundation, Inc. |
| |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; either version 2, or (at your option) |
| ## any later version. |
| |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| am__tty_colors_dummy = \ |
| mgn= red= grn= lgn= blu= brg= std=; \ |
| am__color_tests=no |
| |
| am__tty_colors = { \ |
| $(am__tty_colors_dummy); \ |
| if test "X$(AM_COLOR_TESTS)" = Xno; then \ |
| am__color_tests=no; \ |
| elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ |
| am__color_tests=yes; \ |
| ## If stdout is a non-dumb tty, use colors. If test -t is not supported, |
| ## then this check fails; a conservative approach. Of course do not |
| ## redirect stdout here, just stderr. |
| elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ |
| am__color_tests=yes; \ |
| fi; \ |
| if test $$am__color_tests = yes; then \ |
| red='[0;31m'; \ |
| grn='[0;32m'; \ |
| lgn='[1;32m'; \ |
| blu='[1;34m'; \ |
| mgn='[0;35m'; \ |
| brg='[1m'; \ |
| std='[m'; \ |
| fi; \ |
| } |
| |
| .PHONY: check-TESTS |
| |
| if !%?SERIAL_TESTS% |
| |
| include inst-vars.am |
| |
| ## New parallel test driver. |
| ## |
| ## The first version of the code here was adapted from check.mk, which was |
| ## originally written at EPITA/LRDE, further developed at Gostai, then made |
| ## its way from GNU coreutils to end up, largely rewritten, in Automake. |
| ## The current version is an heavy rewrite of that, to allow for support |
| ## of more test metadata, and the use of custom test drivers and protocols |
| ## (among them, TAP). |
| |
| am__recheck_rx = ^[ ]*:recheck:[ ]* |
| am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* |
| am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* |
| |
| # A command that, given a newline-separated list of test names on the |
| # standard input, print the name of the tests that are to be re-run |
| # upon "make recheck". |
| am__list_recheck_tests = $(AWK) '{ \ |
| ## By default, we assume the test is to be re-run. |
| recheck = 1; \ |
| while ((rc = (getline line < ($$0 ".trs"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| { \ |
| ## If we've encountered an I/O error here, there are three possibilities: |
| ## |
| ## [1] The '.log' file exists, but the '.trs' does not; in this case, |
| ## we "gracefully" recover by assuming the corresponding test is |
| ## to be re-run (which will re-create the missing '.trs' file). |
| ## |
| ## [2] Both the '.log' and '.trs' files are missing; this means that |
| ## the corresponding test has not been run, and is thus *not* to |
| ## be re-run. |
| ## |
| ## [3] We have encountered some corner-case problem (e.g., a '.log' or |
| ## '.trs' files somehow made unreadable, or issues with a bad NFS |
| ## connection, or whatever); we don't handle such corner cases. |
| ## |
| if ((getline line2 < ($$0 ".log")) < 0) \ |
| recheck = 0; \ |
| break; \ |
| } \ |
| else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ |
| ## A directive explicitly specifying the test is *not* to be re-run. |
| { \ |
| recheck = 0; \ |
| break; \ |
| } \ |
| else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ |
| { \ |
| ## A directive explicitly specifying the test *is* to be re-run. |
| break; \ |
| } \ |
| ## else continue with the next iteration. |
| }; \ |
| if (recheck) \ |
| print $$0; \ |
| ## Don't leak open file descriptors, as this could cause serious |
| ## problems when there are many tests (yes, even on Linux). |
| close ($$0 ".trs"); \ |
| close ($$0 ".log"); \ |
| }' |
| |
| # A command that, given a newline-separated list of test names on the |
| # standard input, create the global log from their .trs and .log files. |
| am__create_global_log = $(AWK) ' \ |
| function fatal(msg) \ |
| { \ |
| print "fatal: making $@: " msg | "cat >&2"; \ |
| exit 1; \ |
| } \ |
| function rst_section(header) \ |
| { \ |
| print header; \ |
| len = length(header); \ |
| for (i = 1; i <= len; i = i + 1) \ |
| printf "="; \ |
| printf "\n\n"; \ |
| } \ |
| { \ |
| ## By default, we assume the test log is to be copied in the global log, |
| ## and that its result is simply "RUN" (i.e., we still don't know what |
| ## it outcome was, but we know that at least it has run). |
| copy_in_global_log = 1; \ |
| global_test_result = "RUN"; \ |
| while ((rc = (getline line < ($$0 ".trs"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| fatal("failed to read from " $$0 ".trs"); \ |
| if (line ~ /$(am__global_test_result_rx)/) \ |
| { \ |
| sub("$(am__global_test_result_rx)", "", line); \ |
| sub("[ ]*$$", "", line); \ |
| global_test_result = line; \ |
| } \ |
| else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ |
| copy_in_global_log = 0; \ |
| }; \ |
| if (copy_in_global_log) \ |
| { \ |
| rst_section(global_test_result ": " $$0); \ |
| while ((rc = (getline line < ($$0 ".log"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| fatal("failed to read from " $$0 ".log"); \ |
| print line; \ |
| }; \ |
| printf "\n"; \ |
| }; \ |
| ## Don't leak open file descriptors, as this could cause serious |
| ## problems when there are many tests (yes, even on Linux). |
| close ($$0 ".trs"); \ |
| close ($$0 ".log"); \ |
| }' |
| |
| # Restructured Text title. |
| am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } |
| |
| # Solaris 10 'make', and several other traditional 'make' implementations, |
| # pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it |
| # by disabling -e (using the XSI extension "set +e") if it's set. |
| am__sh_e_setup = case $$- in *e*) set +e;; esac |
| |
| # Default flags passed to test drivers. |
| am__common_driver_flags = \ |
| --color-tests "$$am__color_tests" \ |
| --enable-hard-errors "$$am__enable_hard_errors" \ |
| --expect-failure "$$am__expect_failure" |
| |
| # To be inserted before the command running the test. Creates the |
| # directory for the log if needed. Stores in $dir the directory |
| # containing $f, in $tst the test, in $log the log. Executes the |
| # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and |
| # passes TESTS_ENVIRONMENT. Set up options for the wrapper that |
| # will run the test scripts (or their associated LOG_COMPILER, if |
| # thy have one). |
| am__check_pre = \ |
| $(am__sh_e_setup); \ |
| $(am__vpath_adj_setup) $(am__vpath_adj) \ |
| $(am__tty_colors); \ |
| srcdir=$(srcdir); export srcdir; \ |
| case "$@" in \ |
| */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ |
| *) am__odir=.;; \ |
| esac; \ |
| test "x$$am__odir" = x"." || test -d "$$am__odir" \ |
| || $(MKDIR_P) "$$am__odir" || exit $$?; \ |
| if test -f "./$$f"; then dir=./; \ |
| elif test -f "$$f"; then dir=; \ |
| else dir="$(srcdir)/"; fi; \ |
| tst=$$dir$$f; log='$@'; \ |
| if test -n '$(DISABLE_HARD_ERRORS)'; then \ |
| am__enable_hard_errors=no; \ |
| else \ |
| am__enable_hard_errors=yes; \ |
| fi; \ |
| ## The use of $dir below is required to account for VPATH |
| ## rewriting done by Sun make. |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ |
| am__expect_failure=yes;; \ |
| *) \ |
| am__expect_failure=no;; \ |
| esac; \ |
| $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) |
| |
| # A shell command to get the names of the tests scripts with any registered |
| # extension removed (i.e., equivalently, the names of the test logs, with |
| # the '.log' extension removed). The result is saved in the shell variable |
| # '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, |
| # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", |
| # since that might cause problem with VPATH rewrites for suffix-less tests. |
| # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. |
| am__set_TESTS_bases = \ |
| bases='$(TEST_LOGS)'; \ |
| bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ |
| ## Trim away any extra whitespace. This has already proved useful |
| ## in avoiding weird bug on lesser make implementations. It also |
| ## works around the GNU make 3.80 bug where trailing whitespace in |
| ## "TESTS = foo.test $(empty)" causes $(TESTS_LOGS) to erroneously |
| ## expand to "foo.log .log". |
| bases=`echo $$bases` |
| |
| # Recover from deleted '.trs' file; this should ensure that |
| # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create |
| # both 'foo.log' and 'foo.trs'. Break the recipe in two subshells |
| # to avoid problems with "make -n". |
| .log.trs: |
| rm -f $< $@ |
| $(MAKE) $(AM_MAKEFLAGS) $< |
| |
| # Leading 'am--fnord' is there to ensure the list of targets does not |
| # expand to empty, as could happen e.g. with make check TESTS=''. |
| am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) |
| am--force-recheck: |
| @: |
| |
| $(TEST_SUITE_LOG): $(TEST_LOGS) |
| @$(am__set_TESTS_bases); \ |
| ## Helper shell function, tells whether a path refers to an existing, |
| ## regular, readable file. |
| am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ |
| ## We need to ensures that all the required '.trs' and '.log' files will |
| ## be present and readable. The direct dependencies of $(TEST_SUITE_LOG) |
| ## only ensure that all the '.log' files exists; they don't ensure that |
| ## the '.log' files are readable, and worse, they don't ensure that the |
| ## '.trs' files even exist. |
| redo_bases=`for i in $$bases; do \ |
| am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ |
| done`; \ |
| if test -n "$$redo_bases"; then \ |
| ## Uh-oh, either some '.log' files were unreadable, or some '.trs' files |
| ## were missing (or unreadable). We need to re-run the corresponding |
| ## tests in order to re-create them. |
| redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ |
| redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ |
| if $(am__make_dryrun); then :; else \ |
| ## Break "rm -f" into two calls to minimize the possibility of exceeding |
| ## command line length limits. |
| rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ |
| fi; \ |
| fi; \ |
| ## Use a trick to to ensure that we don't go into an infinite recursion |
| ## in case a test log in $(TEST_LOGS) is the same as $(TEST_SUITE_LOG). |
| ## Yes, this has already happened in practice. Sigh! |
| if test -n "$$am__remaking_logs"; then \ |
| echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ |
| "recursion detected" >&2; \ |
| else \ |
| am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ |
| fi; \ |
| if $(am__make_dryrun); then :; else \ |
| ## Sanity check: each unreadable or non-existent test result file should |
| ## has been properly remade at this point, as should the corresponding log |
| ## file. |
| st=0; \ |
| errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ |
| for i in $$redo_bases; do \ |
| test -f $$i.trs && test -r $$i.trs \ |
| || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ |
| test -f $$i.log && test -r $$i.log \ |
| || { echo "$$errmsg $$i.log" >&2; st=1; }; \ |
| done; \ |
| test $$st -eq 0 || exit 1; \ |
| fi |
| ## We need a new subshell to work portably with "make -n", since the |
| ## previous part of the recipe contained a $(MAKE) invocation. |
| @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ |
| ws='[ ]'; \ |
| ## List of test result files. |
| results=`for b in $$bases; do echo $$b.trs; done`; \ |
| test -n "$$results" || results=/dev/null; \ |
| ## Prepare data for the test suite summary. These do not take into account |
| ## unreadable test results, but they'll be appropriately updated later if |
| ## needed. |
| all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ |
| pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ |
| fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ |
| skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ |
| xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ |
| xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ |
| error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ |
| ## Whether the testsuite was successful or not. |
| if test `expr $$fail + $$xpass + $$error` -eq 0; then \ |
| success=true; \ |
| else \ |
| success=false; \ |
| fi; \ |
| ## Make $br a line of exactly 76 '=' characters, that will be used to |
| ## enclose the testsuite summary report when displayed on the console. |
| br='==================='; br=$$br$$br$$br$$br; \ |
| ## When writing the test summary to the console, we want to color a line |
| ## reporting the count of some result *only* if at least one test |
| ## experienced such a result. This function is handy in this regard. |
| result_count () \ |
| { \ |
| if test x"$$1" = x"--maybe-color"; then \ |
| maybe_colorize=yes; \ |
| elif test x"$$1" = x"--no-color"; then \ |
| maybe_colorize=no; \ |
| else \ |
| echo "$@: invalid 'result_count' usage" >&2; exit 4; \ |
| fi; \ |
| shift; \ |
| desc=$$1 count=$$2; \ |
| if test $$maybe_colorize = yes && test $$count -gt 0; then \ |
| color_start=$$3 color_end=$$std; \ |
| else \ |
| color_start= color_end=; \ |
| fi; \ |
| echo "$${color_start}# $$desc $$count$${color_end}"; \ |
| }; \ |
| ## A shell function that creates the testsuite summary. We need it |
| ## because we have to create *two* summaries, one for test-suite.log, |
| ## and a possibly-colorized one for console output. |
| create_testsuite_report () \ |
| { \ |
| result_count $$1 "TOTAL:" $$all "$$brg"; \ |
| result_count $$1 "PASS: " $$pass "$$grn"; \ |
| result_count $$1 "SKIP: " $$skip "$$blu"; \ |
| result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ |
| result_count $$1 "FAIL: " $$fail "$$red"; \ |
| result_count $$1 "XPASS:" $$xpass "$$red"; \ |
| result_count $$1 "ERROR:" $$error "$$mgn"; \ |
| }; \ |
| ## Write "global" testsuite log. |
| { \ |
| echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ |
| $(am__rst_title); \ |
| create_testsuite_report --no-color; \ |
| echo; \ |
| echo ".. contents:: :depth: 2"; \ |
| echo; \ |
| for b in $$bases; do echo $$b; done \ |
| | $(am__create_global_log); \ |
| } >$(TEST_SUITE_LOG).tmp || exit 1; \ |
| mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ |
| ## Emit the test summary on the console. |
| if $$success; then \ |
| col="$$grn"; \ |
| else \ |
| col="$$red"; \ |
| test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ |
| fi; \ |
| ## Multi line coloring is problematic with "less -R", so we really need |
| ## to color each line individually. |
| echo "$${col}$$br$${std}"; \ |
| echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ |
| echo "$${col}$$br$${std}"; \ |
| ## This is expected to go to the console, so it might have to be colorized. |
| create_testsuite_report --maybe-color; \ |
| echo "$$col$$br$$std"; \ |
| if $$success; then :; else \ |
| echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ |
| if test -n "$(PACKAGE_BUGREPORT)"; then \ |
| echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ |
| fi; \ |
| echo "$$col$$br$$std"; \ |
| fi; \ |
| ## Be sure to exit with the proper exit status. The use of "exit 1" below |
| ## is required to work around a FreeBSD make bug (present only when running |
| ## in concurrent mode). See automake bug#9245: |
| ## <http://debbugs.gnu.org/cgi/bugreport.cgi?bug=9245> |
| ## and FreeBSD PR bin/159730: |
| ## <http://www.freebsd.org/cgi/query-pr.cgi?pr=159730>. |
| $$success || exit 1 |
| |
| RECHECK_LOGS = $(TEST_LOGS) |
| |
| ## ------------------------------------------ ## |
| ## Running all tests, or rechecking failures. ## |
| ## ------------------------------------------ ## |
| |
| check-TESTS: |
| @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list |
| @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list |
| ## We always have to remove $(TEST_SUITE_LOG), to ensure its rule is run |
| ## in any case even in lazy mode: otherwise, if no test needs rerunning, |
| ## or a prior run plus reruns all happen within the same timestamp (can |
| ## happen with a prior "make TESTS=<subset>"), then we get no log output. |
| ## OTOH, this means that, in the rule for '$(TEST_SUITE_LOG)', we |
| ## cannot use '$?' to compute the set of lazily rerun tests, lest |
| ## we rely on .PHONY to work portably. |
| @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) |
| @set +e; $(am__set_TESTS_bases); \ |
| log_list=`for i in $$bases; do echo $$i.log; done`; \ |
| trs_list=`for i in $$bases; do echo $$i.trs; done`; \ |
| ## Remove newlines and normalize whitespace. Trailing (and possibly |
| ## leading) whitespace is known to cause segmentation faults on |
| ## Solaris 10 XPG4 make. |
| log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ |
| $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ |
| ## Be sure to exit with the proper exit status (automake bug#9245). See |
| ## comments in the recipe of $(TEST_SUITE_LOG) above for more information. |
| exit $$?; |
| |
| ## Recheck must depend on $(check_SCRIPTS), $(check_PROGRAMS), etc. |
| ## It must also depend on the 'all' target. See automake bug#11252. |
| recheck: all %CHECK_DEPS% |
| ## See comments above in the check-TESTS recipe for why remove |
| ## $(TEST_SUITE_LOG) here. |
| @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) |
| @set +e; $(am__set_TESTS_bases); \ |
| ## We must only consider tests that had an unexpected outcome (FAIL |
| ## or XPASS) in the earlier run. |
| bases=`for i in $$bases; do echo $$i; done \ |
| | $(am__list_recheck_tests)` || exit 1; \ |
| log_list=`for i in $$bases; do echo $$i.log; done`; \ |
| ## Remove newlines and normalize whitespace. Trailing (and possibly |
| ## leading) whitespace is known to cause segmentation faults on |
| ## Solaris 10 XPG4 make. |
| log_list=`echo $$log_list`; \ |
| ## Move the '.log' and '.trs' files associated with the tests to be |
| ## re-run out of the way, so that those tests will be re-run by the |
| ## "make test-suite.log" recursive invocation below. |
| ## Two tricky requirements: |
| ## - we must avoid extra files removal when running under "make -n"; |
| ## - in case the test is a compiled program whose compilation fails, |
| ## we must ensure that any '.log' and '.trs' file referring to such |
| ## test are preserved, so that future "make recheck" invocations |
| ## will still try to re-compile and re-run it (automake bug#11791). |
| ## The tricky recursive make invocation below should cater to such |
| ## requirements. |
| $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ |
| am__force_recheck=am--force-recheck \ |
| TEST_LOGS="$$log_list"; \ |
| ## Be sure to exit with the proper exit status (automake bug#9245). See |
| ## comments in the recipe of $(TEST_SUITE_LOG) above for more information. |
| exit $$? |
| |
| AM_RECURSIVE_TARGETS += check recheck |
| |
| .PHONY: recheck |
| |
| else %?SERIAL_TESTS% |
| |
| ## Obsolescent serial testsuite driver. |
| |
| check-TESTS: $(TESTS) |
| @failed=0; all=0; xfail=0; xpass=0; skip=0; \ |
| srcdir=$(srcdir); export srcdir; \ |
| ## Make sure Solaris VPATH-expands all members of this list, even |
| ## the first and the last one; thus the spaces around $(TESTS) |
| list=' $(TESTS) '; \ |
| $(am__tty_colors); \ |
| if test -n "$$list"; then \ |
| for tst in $$list; do \ |
| if test -f ./$$tst; then dir=./; \ |
| ## Note: Solaris 2.7 seems to expand TESTS using VPATH. That's |
| ## why we also try 'dir='. |
| elif test -f $$tst; then dir=; \ |
| else dir="$(srcdir)/"; fi; \ |
| if $(TESTS_ENVIRONMENT) $${dir}$$tst $(AM_TESTS_FD_REDIRECT); then \ |
| ## Success |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$tst[\ \ ]*) \ |
| xpass=`expr $$xpass + 1`; \ |
| failed=`expr $$failed + 1`; \ |
| col=$$red; res=XPASS; \ |
| ;; \ |
| *) \ |
| col=$$grn; res=PASS; \ |
| ;; \ |
| esac; \ |
| elif test $$? -ne 77; then \ |
| ## Failure |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$tst[\ \ ]*) \ |
| xfail=`expr $$xfail + 1`; \ |
| col=$$lgn; res=XFAIL; \ |
| ;; \ |
| *) \ |
| failed=`expr $$failed + 1`; \ |
| col=$$red; res=FAIL; \ |
| ;; \ |
| esac; \ |
| else \ |
| ## Skipped |
| skip=`expr $$skip + 1`; \ |
| col=$$blu; res=SKIP; \ |
| fi; \ |
| echo "$${col}$$res$${std}: $$tst"; \ |
| done; \ |
| ## Prepare the banner |
| if test "$$all" -eq 1; then \ |
| tests="test"; \ |
| All=""; \ |
| else \ |
| tests="tests"; \ |
| All="All "; \ |
| fi; \ |
| if test "$$failed" -eq 0; then \ |
| if test "$$xfail" -eq 0; then \ |
| banner="$$All$$all $$tests passed"; \ |
| else \ |
| if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ |
| banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ |
| fi; \ |
| else \ |
| if test "$$xpass" -eq 0; then \ |
| banner="$$failed of $$all $$tests failed"; \ |
| else \ |
| if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ |
| banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ |
| fi; \ |
| fi; \ |
| ## DASHES should contain the largest line of the banner. |
| dashes="$$banner"; \ |
| skipped=""; \ |
| if test "$$skip" -ne 0; then \ |
| if test "$$skip" -eq 1; then \ |
| skipped="($$skip test was not run)"; \ |
| else \ |
| skipped="($$skip tests were not run)"; \ |
| fi; \ |
| test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$skipped"; \ |
| fi; \ |
| report=""; \ |
| if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ |
| report="Please report to $(PACKAGE_BUGREPORT)"; \ |
| test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$report"; \ |
| fi; \ |
| dashes=`echo "$$dashes" | sed s/./=/g`; \ |
| if test "$$failed" -eq 0; then \ |
| col="$$grn"; \ |
| else \ |
| col="$$red"; \ |
| fi; \ |
| ## Multi line coloring is problematic with "less -R", so we really need |
| ## to color each line individually. |
| echo "$${col}$$dashes$${std}"; \ |
| echo "$${col}$$banner$${std}"; \ |
| test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \ |
| test -z "$$report" || echo "$${col}$$report$${std}"; \ |
| echo "$${col}$$dashes$${std}"; \ |
| test "$$failed" -eq 0; \ |
| else :; fi |
| |
| endif %?SERIAL_TESTS% |
