| ## automake - create Makefile.in from Makefile.am |
| ## Copyright (C) 2001-2013 Free Software Foundation, Inc. |
| |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; either version 2, or (at your option) |
| ## any later version. |
| |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| |
| if %?TOPDIR_P% |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| ## On MSYS (1.0.17) it is not possible to remove a directory that is in |
| ## use; so, if the first rm fails, we sleep some seconds and retry, to |
| ## give pending processes some time to exit and "release" the directory |
| ## before we remove it. The value of "some seconds" is 5 for the moment, |
| ## which is mostly an arbitrary value, but seems high enough in practice. |
| ## See automake bug#10470. |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__post_remove_distdir = $(am__remove_distdir) |
| endif %?TOPDIR_P% |
| |
| if %?SUBDIRS% |
| ## computes a relative pathname RELDIR such that DIR1/RELDIR = DIR2. |
| ## Input: |
| ## - DIR1 relative pathname, relative to the current directory |
| ## - DIR2 relative pathname, relative to the current directory |
| ## Output: |
| ## - reldir relative pathname of DIR2, relative to DIR1 |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| endif %?SUBDIRS% |
| |
| .PHONY: distdir |
| if %?SUBDIRS% |
| AM_RECURSIVE_TARGETS += distdir |
| endif %?SUBDIRS% |
| |
| distdir: $(DISTFILES) |
| ## |
| ## For Gnits users, this is pretty handy. Look at 15 lines |
| ## in case some explanatory text is desirable. |
| ## |
| if %?TOPDIR_P% |
| if %?CK-NEWS% |
| @case `sed 15q $(srcdir)/NEWS` in \ |
| *"$(VERSION)"*) : ;; \ |
| *) \ |
| echo "NEWS not updated; not releasing" 1>&2; \ |
| exit 1;; \ |
| esac |
| endif %?CK-NEWS% |
| endif %?TOPDIR_P% |
| ## |
| ## Only for the top dir. |
| ## |
| if %?TOPDIR_P% |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| endif %?TOPDIR_P% |
| ## |
| ## |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| ## |
| ## Yet another hack to support SUN make. |
| ## |
| ## Let's assume 'foo' appears in DISTFILES and is not a built file. |
| ## When building with VPATH=$(srcdir), SUN make and OSF1/Tru64 will |
| ## rewrite 'foo' as '$(srcdir)/foo'. An attempt to install the file |
| ## with |
| ## cp $file $(distdir)/$file |
| ## will thus install $(srcdir)/foo as $(distdir)/$(srcdir)/foo |
| ## instead of $(distdir)/foo. |
| ## |
| ## So let's strip this leading $(srcdir)/ when it exists. (As far we |
| ## know, only SUN make and OSF1/Tru64 make add it.) Searching whether |
| ## the file is to be found in the source or build directory will be |
| ## done later. |
| ## |
| ## In case we are _not_ using SUN or OSF1/Tru64 make, how can we be sure |
| ## we are not stripping a legitimate filename that starts with the |
| ## same pattern as $(srcdir)? |
| ## Well, it can't happen without the Makefile author distributing |
| ## something out of the distribution (which is bad). As an example, |
| ## consider "EXTRA_DIST = ../bar". This is an issue if $srcdir is |
| ## '..', however getting this value for srcdir is impossible: |
| ## "EXTRA_DIST = ../bar" implies we are in a subdirectory (so '../bar' |
| ## is within the package), hence '$srcdir' is something like |
| ## '../../subdir'. |
| ## |
| ## There is more to say about files which are above the current directory, |
| ## like '../bar' in the previous example. The OSF1/Tru64 make |
| ## implementation can simplify filenames resulting from a VPATH lookup. |
| ## For instance if "VPATH = ../../subdir" and '../bar' is found in that |
| ## VPATH directory, then occurrences of '../bar' will be replaced by |
| ## '../../bar' (instead of '../../subdir/../bar'). This obviously defeats |
| ## any attempt to strip a leading $srcdir. Presently we have no workaround |
| ## for this. We avoid this issue by writing "EXTRA_DIST = $(srcdir)/../bar" |
| ## instead of "EXTRA_DIST = ../bar". This prefixing is needed only for files |
| ## above the current directory. Fortunately, apart from auxdir files which |
| ## can be located in .. or ../.., this situation hardly occurs in practice. |
| ## |
| ## Also rewrite $(top_srcdir) (which sometimes appears in DISTFILES, and can |
| ## be absolute) by $(top_builddir) (which is always relative). $(srcdir) will |
| ## be prepended later. |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| ## (The second 't' command clears the flag for the next round.) |
| ## |
| ## Make the subdirectories for the files. |
| ## |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| ## |
| ## |
| for file in $$dist_files; do \ |
| ## |
| ## Always look for the file in the build directory first. That way |
| ## for something like yacc output we will correctly pick up the latest |
| ## version. Also check for directories in the build directory first, |
| ## so one can ship generated directories. |
| ## |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| ## |
| ## Use cp, not ln. There are situations in which "ln" can fail. For |
| ## instance a file to distribute could actually be a cross-filesystem |
| ## symlink -- this can easily happen if "gettextize" was run on the |
| ## distribution. |
| ## |
| if test -d $$d/$$file; then \ |
| ## Don't mention $$file in the destination argument, since this fails if |
| ## the destination directory already exists. Also, use '-R' and not '-r'. |
| ## '-r' is almost always incorrect. |
| ## |
| ## If a directory exists both in '.' and $(srcdir), then we copy the |
| ## files from $(srcdir) first and then install those from '.'. This |
| ## can help people who distribute directories made of source files |
| ## *and* generated files. It is also important when the directory |
| ## exists only in $(srcdir), because some vendor Make (such as Tru64) |
| ## will magically create an empty directory in '.'. |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| ## If the destination directory already exists, it may contain read-only |
| ## files, e.g., during "make distcheck". |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| ## Test for file existence because sometimes a file gets included in |
| ## DISTFILES twice. For example this happens when a single source |
| ## file is used in building more than one program. |
| ## See also test 'dist-repeated.sh'. |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| ## |
| ## Test for directory existence here because previous automake |
| ## invocation might have created some directories. Note that we |
| ## explicitly set distdir for the subdir make; that lets us mix-n-match |
| ## many automake-using packages into one large package, and have "dist" |
| ## at the top level do the right thing. If we're in the topmost |
| ## directory, then we use 'distdir' instead of 'top_distdir'; this lets |
| ## us work correctly with an enclosing package. |
| if %?SUBDIRS% |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| $(am__make_dryrun) \ |
| || test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| ## Disable am__remove_distdir so that sub-packages do not clear a |
| ## directory we have already cleared and might even have populated |
| ## (e.g. shared AUX dir in the sub-package). |
| am__remove_distdir=: \ |
| ## Disable filename length check: |
| am__skip_length_check=: \ |
| ## No need to fix modes more than once: |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| endif %?SUBDIRS% |
| ## |
| ## We might have to perform some last second updates, such as updating |
| ## info files. |
| ## We must explicitly set distdir and top_distdir for these sub-makes. |
| ## |
| if %?DIST-TARGETS% |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| %DIST-TARGETS% |
| endif %?DIST-TARGETS% |
| ## |
| ## This complex find command will try to avoid changing the modes of |
| ## links into the source tree, in case they're hard-linked. |
| ## |
| ## Ignore return result from chmod, because it might give an error |
| ## if we chmod a symlink. |
| ## |
| ## Another nastiness: if the file is unreadable by us, we make it |
| ## readable regardless of the number of links to it. This only |
| ## happens in perverse cases. |
| ## |
| ## We use $(install_sh) because that is a known-portable way to modify |
| ## the file in place in the source tree. |
| ## |
| ## If we are being invoked recursively, then there is no need to walk |
| ## the whole subtree again. This is a complexity reduction for a deep |
| ## hierarchy of subpackages. |
| ## |
| if %?TOPDIR_P% |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| if %?FILENAME_FILTER% |
| @if test -z "$(am__skip_length_check)" && find "$(distdir)" -type f -print | \ |
| grep '^%FILENAME_FILTER%' 1>&2; then \ |
| echo 'error: the above filenames are too long' 1>&2; \ |
| exit 1; \ |
| else :; fi |
| endif %?FILENAME_FILTER% |
| endif %?TOPDIR_P% |
| |
| |
| |
| ## --------------------------------------- ## |
| ## Building various distribution flavors. ## |
| ## --------------------------------------- ## |
| |
| ## Note that we don't use GNU tar's '-z' option. One reason (but not |
| ## the only reason) is that some versions of tar (e.g., OSF1) |
| ## interpret '-z' differently. |
| ## |
| ## The -o option of GNU tar used to exclude empty directories. This |
| ## behavior was fixed in tar 1.12 (released on 1997-04-25). But older |
| ## versions of tar are still used (for instance NetBSD 1.6.1 ships |
| ## with tar 1.11.2). We do not do anything specific w.r.t. this |
| ## incompatibility since packages where empty directories need to be |
| ## present in the archive are really unusual. |
| ## |
| ## We order DIST_TARGETS by expected duration of the compressors, |
| ## slowest first, for better parallelism in "make dist". Do not |
| ## reorder DIST_ARCHIVES, users may expect gzip to be first. |
| |
| if %?TOPDIR_P% |
| |
| ?GZIP?DIST_ARCHIVES += $(distdir).tar.gz |
| GZIP_ENV = --best |
| .PHONY: dist-gzip |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__post_remove_distdir) |
| |
| ?BZIP2?DIST_ARCHIVES += $(distdir).tar.bz2 |
| .PHONY: dist-bzip2 |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__post_remove_distdir) |
| |
| ?LZIP?DIST_ARCHIVES += $(distdir).tar.lz |
| .PHONY: dist-lzip |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__post_remove_distdir) |
| |
| ?XZ?DIST_ARCHIVES += $(distdir).tar.xz |
| .PHONY: dist-xz |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__post_remove_distdir) |
| |
| ?COMPRESS?DIST_ARCHIVES += $(distdir).tar.Z |
| .PHONY: dist-tarZ |
| dist-tarZ: distdir |
| @echo WARNING: "Support for shar distribution archives is" \ |
| "deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__post_remove_distdir) |
| |
| ?SHAR?DIST_ARCHIVES += $(distdir).shar.gz |
| .PHONY: dist-shar |
| dist-shar: distdir |
| @echo WARNING: "Support for distribution archives compressed with" \ |
| "legacy program 'compress' is deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__post_remove_distdir) |
| |
| ?ZIP?DIST_ARCHIVES += $(distdir).zip |
| .PHONY: dist-zip |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__post_remove_distdir) |
| |
| ?LZIP?DIST_TARGETS += dist-lzip |
| ?XZ?DIST_TARGETS += dist-xz |
| ?SHAR?DIST_TARGETS += dist-shar |
| ?BZIP2?DIST_TARGETS += dist-bzip2 |
| ?GZIP?DIST_TARGETS += dist-gzip |
| ?ZIP?DIST_TARGETS += dist-zip |
| ?COMPRESS?DIST_TARGETS += dist-tarZ |
| |
| endif %?TOPDIR_P% |
| |
| |
| |
| ## ------------------------------------------------- ## |
| ## Building all the requested distribution flavors. ## |
| ## ------------------------------------------------- ## |
| |
| ## Currently we cannot use if/endif inside a rule. The file_contents |
| ## parser needs work. |
| |
| if %?TOPDIR_P% |
| |
| .PHONY: dist dist-all |
| if %?SUBDIRS% |
| AM_RECURSIVE_TARGETS += dist dist-all |
| endif %?SUBDIRS% |
| |
| dist dist-all: |
| $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| $(am__post_remove_distdir) |
| |
| endif %?TOPDIR_P% |
| |
| |
| ## ------------------------- ## |
| ## Checking a distribution. ## |
| ## ------------------------- ## |
| |
| |
| if %?TOPDIR_P% |
| if %?SUBDIRS% |
| AM_RECURSIVE_TARGETS += distcheck |
| endif %?SUBDIRS% |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| .PHONY: distcheck |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| ## Make the new source tree read-only. Distributions ought to work in |
| ## this case. However, make the top-level directory writable so we |
| ## can make our new subdirs. |
| chmod -R a-w $(distdir) |
| chmod u+w $(distdir) |
| mkdir $(distdir)/_build $(distdir)/_inst |
| ## Undo the write access. |
| chmod a-w $(distdir) |
| ## With GNU make, the following command will be executed even with "make -n", |
| ## due to the presence of '$(MAKE)'. That is normally all well (and '$(MAKE)' |
| ## is necessary for things like parallel distcheck), but here we don't want |
| ## execution. To avoid MAKEFLAGS parsing hassles, use a witness file that a |
| ## non-'-n' run would have just created. |
| test -d $(distdir)/_build || exit 0; \ |
| ## Compute the absolute path of '_inst'. Strip any leading DOS drive |
| ## to allow DESTDIR installations. Otherwise "$(DESTDIR)$(prefix)" would |
| ## expand to "c:/temp/am-dc-5668/c:/src/package/package-1.0/_inst". |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| ## We will attempt a DESTDIR install in $dc_destdir. We don't |
| ## create this directory under $dc_install_base, because it would |
| ## create very long directory names. |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| ?DISTCHECK-HOOK? && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \ |
| ## Parallel BSD make may not start a new shell for each command in a recipe, |
| ## so be sure to 'cd' back to the original directory after this. |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build \ |
| && ../configure \ |
| ?GETTEXT? --with-included-gettext \ |
| ## Additional flags for configure. |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| ## At the moment, the code doesn't actually support changes in these --srcdir |
| ## and --prefix values, so don't allow them to be overridden by the user or |
| ## the developer. That used to be allowed, and caused issues in practice |
| ## (in corner-case usages); see automake bug#14991. |
| --srcdir=.. --prefix="$$dc_install_base" \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| ## Make sure the package has proper DESTDIR support (we could not test this |
| ## in the previous install/installcheck/uninstall test, because it's reasonable |
| ## for installcheck to fail in a DESTDIR install). |
| ## We make the '$dc_install_base' read-only because this is where files |
| ## with missing DESTDIR support are likely to be installed. |
| && chmod -R a-w "$$dc_install_base" \ |
| ## The logic here is quite convoluted because we must clean $dc_destdir |
| ## whatever happens (it won't be erased by the next run of distcheck like |
| ## $(distdir) is). |
| && ({ \ |
| ## Build the directory, so we can cd into it even if "make install" |
| ## didn't create it. Use mkdir, not $(MKDIR_P) because we want to |
| ## fail if the directory already exists (PR/413). |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| ## Make sure to remove the dists we created in the test build directory. |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| ## Cater to parallel BSD make (see above). |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__post_remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| |
| ## Define distuninstallcheck_listfiles and distuninstallcheck separately |
| ## from distcheck, so that they can be overridden by the user. |
| .PHONY: distuninstallcheck |
| distuninstallcheck_listfiles = find . -type f -print |
| ## The 'dir' file (created by install-info) might still exist after |
| ## uninstall, so we must be prepared to account for it. The following |
| ## check is not 100% strict, but is definitely good enough, and even |
| ## accounts for overridden $(infodir). |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| |
| ## Define distcleancheck_listfiles and distcleancheck separately |
| ## from distcheck, so that they can be overridden by the user. |
| .PHONY: distcleancheck |
| distcleancheck_listfiles = find . -type f -print |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| endif %?TOPDIR_P% |
