| /* |
| * Copyright (c) 2016, The OpenThread Authors. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the copyright holder nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * @brief |
| * This file defines the radio interface for OpenThread. |
| * |
| */ |
| |
| #ifndef RADIO_H_ |
| #define RADIO_H_ |
| |
| #include <stdint.h> |
| |
| #include <openthread/types.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * @addtogroup plat-radio |
| * |
| * @brief |
| * This module includes the platform abstraction for radio communication. |
| * |
| * @{ |
| * |
| */ |
| |
| /** |
| * @defgroup radio-types Types |
| * |
| * @brief |
| * This module includes the platform abstraction for a radio frame. |
| * |
| * @{ |
| * |
| */ |
| |
| enum |
| { |
| OT_RADIO_FRAME_MAX_SIZE = 127, ///< aMaxPHYPacketSize (IEEE 802.15.4-2006) |
| OT_RADIO_CHANNEL_MIN = 11, ///< 2.4 GHz IEEE 802.15.4-2006 |
| OT_RADIO_CHANNEL_MAX = 26, ///< 2.4 GHz IEEE 802.15.4-2006 |
| OT_RADIO_SUPPORTED_CHANNELS = 0xffff << OT_RADIO_CHANNEL_MIN, ///< 2.4 GHz IEEE 802.15.4-2006 |
| OT_RADIO_SYMBOLS_PER_OCTET = 2, ///< 2.4 GHz IEEE 802.15.4-2006 |
| OT_RADIO_BIT_RATE = 250000, ///< 2.4 GHz IEEE 802.15.4 (kilobits per second) |
| |
| OT_RADIO_BITS_PER_OCTET = 8, ///< Number of bits per octet |
| OT_RADIO_SYMBOL_TIME = ((OT_RADIO_BITS_PER_OCTET / OT_RADIO_SYMBOLS_PER_OCTET) * 1000000) / OT_RADIO_BIT_RATE, |
| |
| OT_RADIO_LQI_NONE = 0, ///< LQI measurement not supported |
| OT_RADIO_RSSI_INVALID = 127, ///< Invalid or unknown RSSI value |
| }; |
| |
| /** |
| * This enum represents radio capabilities. |
| * |
| */ |
| typedef enum otRadioCaps |
| { |
| OT_RADIO_CAPS_NONE = 0, ///< None |
| OT_RADIO_CAPS_ACK_TIMEOUT = 1, ///< Radio supports AckTime event |
| OT_RADIO_CAPS_ENERGY_SCAN = 2, ///< Radio supports Energy Scans |
| OT_RADIO_CAPS_TRANSMIT_RETRIES = 4, ///< Radio supports transmission retry logic with collision avoidance (CSMA). |
| OT_RADIO_CAPS_CSMA_BACKOFF = 8, ///< Radio supports CSMA backoff for frame transmission (but no retry). |
| } otRadioCaps; |
| |
| /** |
| * This structure represents an IEEE 802.15.4 radio frame. |
| */ |
| typedef struct otRadioFrame |
| { |
| uint8_t *mPsdu; ///< The PSDU. |
| uint8_t mLength; ///< Length of the PSDU. |
| uint8_t mChannel; ///< Channel used to transmit/receive the frame. |
| int8_t mPower; ///< Transmit/receive power in dBm. |
| uint8_t mLqi; ///< Link Quality Indicator for received frames. |
| uint8_t mMaxTxAttempts; ///< Max number of transmit attempts for an outbound frame. |
| bool mSecurityValid: 1; ///< Security Enabled flag is set and frame passes security checks. |
| bool mDidTX: 1; ///< Set to true if this frame sent from the radio. Ignored by radio driver. |
| bool mIsARetx: 1; ///< Set to true if this frame is a retransmission. Should be ignored by radio driver. |
| } otRadioFrame; |
| |
| /** |
| * This structure represents the state of a radio. |
| * Initially, a radio is in the Disabled state. |
| */ |
| typedef enum otRadioState |
| { |
| OT_RADIO_STATE_DISABLED = 0, |
| OT_RADIO_STATE_SLEEP = 1, |
| OT_RADIO_STATE_RECEIVE = 2, |
| OT_RADIO_STATE_TRANSMIT = 3, |
| } otRadioState; |
| |
| /** |
| * The following are valid radio state transitions: |
| * |
| * (Radio ON) |
| * +----------+ Enable() +-------+ Receive() +---------+ Transmit() +----------+ |
| * | |----------->| |----------->| |-------------->| | |
| * | Disabled | | Sleep | | Receive | | Transmit | |
| * | |<-----------| |<-----------| |<--------------| | |
| * +----------+ Disable() +-------+ Sleep() +---------+ Receive() +----------+ |
| * (Radio OFF) or |
| * signal TransmitDone |
| */ |
| |
| /** |
| * @} |
| * |
| */ |
| |
| /** |
| * @defgroup radio-config Configuration |
| * |
| * @brief |
| * This module includes the platform abstraction for radio configuration. |
| * |
| * @{ |
| * |
| */ |
| |
| /** |
| * Get the factory-assigned IEEE EUI-64 for this interface. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[out] aIeeeEui64 A pointer to where the factory-assigned IEEE EUI-64 will be placed. |
| * |
| */ |
| void otPlatRadioGetIeeeEui64(otInstance *aInstance, uint8_t *aIeeeEui64); |
| |
| /** |
| * Set the PAN ID for address filtering. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aPanId The IEEE 802.15.4 PAN ID. |
| * |
| */ |
| void otPlatRadioSetPanId(otInstance *aInstance, uint16_t aPanId); |
| |
| /** |
| * Set the Extended Address for address filtering. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aExtendedAddress A pointer to the IEEE 802.15.4 Extended Address. |
| * |
| */ |
| void otPlatRadioSetExtendedAddress(otInstance *aInstance, uint8_t *aExtendedAddress); |
| |
| /** |
| * Set the Short Address for address filtering. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aShortAddress The IEEE 802.15.4 Short Address. |
| * |
| */ |
| void otPlatRadioSetShortAddress(otInstance *aInstance, uint16_t aShortAddress); |
| |
| /** |
| * @} |
| * |
| */ |
| |
| /** |
| * @defgroup radio-operation Operation |
| * |
| * @brief |
| * This module includes the platform abstraction for radio operations. |
| * |
| * @{ |
| * |
| */ |
| |
| /** |
| * Get current state of the radio. |
| * |
| * This function is not required by OpenThread. It may be used for debugging and/or application-specific purposes. |
| * |
| * @note This function may be not implemented. It does not affect OpenThread. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @return Current state of the radio. |
| */ |
| otRadioState otPlatRadioGetState(otInstance *aInstance); |
| |
| /** |
| * Enable the radio. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @retval OT_ERROR_NONE Successfully enabled. |
| * @retval OT_ERROR_FAILED The radio could not be enabled. |
| */ |
| otError otPlatRadioEnable(otInstance *aInstance); |
| |
| /** |
| * Disable the radio. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @retval OT_ERROR_NONE Successfully transitioned to Disabled. |
| */ |
| otError otPlatRadioDisable(otInstance *aInstance); |
| |
| /** |
| * Check whether radio is enabled or not. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @returns TRUE if the radio is enabled, FALSE otherwise. |
| * |
| */ |
| bool otPlatRadioIsEnabled(otInstance *aInstance); |
| |
| /** |
| * Transition the radio from Receive to Sleep. |
| * Turn off the radio. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @retval OT_ERROR_NONE Successfully transitioned to Sleep. |
| * @retval OT_ERROR_BUSY The radio was transmitting |
| * @retval OT_ERROR_INVALID_STATE The radio was disabled |
| */ |
| otError otPlatRadioSleep(otInstance *aInstance); |
| |
| /** |
| * Transitioning the radio from Sleep to Receive. |
| * Turn on the radio. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aChannel The channel to use for receiving. |
| * |
| * @retval OT_ERROR_NONE Successfully transitioned to Receive. |
| * @retval OT_ERROR_INVALID_STATE The radio was disabled or transmitting. |
| */ |
| otError otPlatRadioReceive(otInstance *aInstance, uint8_t aChannel); |
| |
| /** |
| * Enable/Disable source address match feature. |
| * |
| * The source address match feature controls how the radio layer decides the "frame pending" bit for acks sent in |
| * response to data request commands from children. |
| * |
| * If disabled, the radio layer must set the "frame pending" on all acks to data request commands. |
| * |
| * If enabled, the radio layer uses the source address match table to determine whether to set or clear the "frame |
| * pending" bit in an ack to a data request command. |
| * |
| * The source address match table provides the list of children for which there is a pending frame. Either a short |
| * address or an extended/long address can be added to the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aEnable Enable/disable source address match feature. |
| */ |
| void otPlatRadioEnableSrcMatch(otInstance *aInstance, bool aEnable); |
| |
| /** |
| * Add a short address to the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aShortAddress The short address to be added. |
| * |
| * @retval OT_ERROR_NONE Successfully added short address to the source match table. |
| * @retval OT_ERROR_NO_BUFS No available entry in the source match table. |
| */ |
| otError otPlatRadioAddSrcMatchShortEntry(otInstance *aInstance, const uint16_t aShortAddress); |
| |
| /** |
| * Add an extended address to the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aExtAddress The extended address to be added. |
| * |
| * @retval OT_ERROR_NONE Successfully added extended address to the source match table. |
| * @retval OT_ERROR_NO_BUFS No available entry in the source match table. |
| */ |
| otError otPlatRadioAddSrcMatchExtEntry(otInstance *aInstance, const uint8_t *aExtAddress); |
| |
| /** |
| * Remove a short address from the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aShortAddress The short address to be removed. |
| * |
| * @retval OT_ERROR_NONE Successfully removed short address from the source match table. |
| * @retval OT_ERROR_NO_ADDRESS The short address is not in source address match table. |
| */ |
| otError otPlatRadioClearSrcMatchShortEntry(otInstance *aInstance, const uint16_t aShortAddress); |
| |
| /** |
| * Remove an extended address from the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aExtAddress The extended address to be removed. |
| * |
| * @retval OT_ERROR_NONE Successfully removed the extended address from the source match table. |
| * @retval OT_ERROR_NO_ADDRESS The extended address is not in source address match table. |
| */ |
| otError otPlatRadioClearSrcMatchExtEntry(otInstance *aInstance, const uint8_t *aExtAddress); |
| |
| /** |
| * Clear all short addresses from the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| */ |
| void otPlatRadioClearSrcMatchShortEntries(otInstance *aInstance); |
| |
| /** |
| * Clear all the extended/long addresses from source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| */ |
| void otPlatRadioClearSrcMatchExtEntries(otInstance *aInstance); |
| |
| /** |
| * The radio driver calls this method to notify OpenThread of a received frame. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the received frame or NULL if the receive operation failed. |
| * @param[in] aError OT_ERROR_NONE when successfully received a frame, OT_ERROR_ABORT when reception |
| * was aborted and a frame was not received, OT_ERROR_NO_BUFS when a frame could not be |
| * received due to lack of rx buffer space. |
| * |
| */ |
| extern void otPlatRadioReceiveDone(otInstance *aInstance, otRadioFrame *aFrame, otError aError); |
| |
| /** |
| * The radio transitions from Transmit to Receive. |
| * This method returns a pointer to the transmit buffer. |
| * |
| * The caller forms the IEEE 802.15.4 frame in this buffer then calls otPlatRadioTransmit() to request transmission. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @returns A pointer to the transmit buffer. |
| * |
| */ |
| otRadioFrame *otPlatRadioGetTransmitBuffer(otInstance *aInstance); |
| |
| /** |
| * This method begins the transmit sequence on the radio. |
| * |
| * The caller must form the IEEE 802.15.4 frame in the buffer provided by otPlatRadioGetTransmitBuffer() before |
| * requesting transmission. The channel and transmit power are also included in the otRadioFrame structure. |
| * |
| * The transmit sequence consists of: |
| * 1. Transitioning the radio to Transmit from Receive. |
| * 2. Transmits the psdu on the given channel and at the given transmit power. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the frame that will be transmitted. |
| * |
| * @retval OT_ERROR_NONE Successfully transitioned to Transmit. |
| * @retval OT_ERROR_INVALID_STATE The radio was not in the Receive state. |
| */ |
| otError otPlatRadioTransmit(otInstance *aInstance, otRadioFrame *aFrame); |
| |
| /** |
| * The radio driver calls this method to notify OpenThread that the transmission has completed, |
| * this callback pass up the ACK frame, new add platforms should use this callback function. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the frame that was transmitted. |
| * @param[in] aAckFrame A pointer to the ACK frame, NULL if no ACK was received. |
| * @param[in] aError OT_ERROR_NONE when the frame was transmitted, OT_ERROR_NO_ACK when the frame was |
| * transmitted but no ACK was received, OT_ERROR_CHANNEL_ACCESS_FAILURE when the transmission |
| * could not take place due to activity on the channel, OT_ERROR_ABORT when transmission was |
| * aborted for other reasons. |
| * |
| */ |
| extern void otPlatRadioTxDone(otInstance *aInstance, otRadioFrame *aFrame, otRadioFrame *aAckFrame, |
| otError aError); |
| |
| /** |
| * The radio driver calls this method to notify OpenThread that the transmission has completed, |
| * this function is going to be deprecated, new add platfroms should not use this callback function. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the frame that was transmitted. |
| * @param[in] aFramePending TRUE if an ACK frame was received and the Frame Pending bit was set. |
| * @param[in] aError OT_ERROR_NONE when the frame was transmitted, OT_ERROR_NO_ACK when the frame was |
| * transmitted but no ACK was received, OT_ERROR_CHANNEL_ACCESS_FAILURE when the transmission |
| * could not take place due to activity on the channel, OT_ERROR_ABORT when transmission was |
| * aborted for other reasons. |
| * |
| */ |
| extern void otPlatRadioTransmitDone(otInstance *aInstance, otRadioFrame *aFrame, bool aFramePending, |
| otError aError); |
| |
| /** |
| * Get the most recent RSSI measurement. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @returns The RSSI in dBm when it is valid. 127 when RSSI is invalid. |
| */ |
| int8_t otPlatRadioGetRssi(otInstance *aInstance); |
| |
| /** |
| * Get the radio capabilities. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @returns The radio capability bit vector. The stack enables or disables some functions based on this value. |
| */ |
| otRadioCaps otPlatRadioGetCaps(otInstance *aInstance); |
| |
| /** |
| * Set the radio Tx power used for auto-generated frames. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aPower The Tx power to use in dBm. |
| * |
| */ |
| void otPlatRadioSetDefaultTxPower(otInstance *aInstance, int8_t aPower); |
| |
| /** |
| * Get the status of promiscuous mode. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @retval true Promiscuous mode is enabled. |
| * @retval false Promiscuous mode is disabled. |
| */ |
| bool otPlatRadioGetPromiscuous(otInstance *aInstance); |
| |
| /** |
| * Enable or disable promiscuous mode. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aEnable A value to enable or disable promiscuous mode. |
| */ |
| void otPlatRadioSetPromiscuous(otInstance *aInstance, bool aEnable); |
| |
| /** |
| * The radio driver calls this method to notify OpenThread diagnostics module that the transmission has completed. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the frame that was transmitted. |
| * @param[in] aError OT_ERROR_NONE when the frame was transmitted, OT_ERROR_CHANNEL_ACCESS_FAILURE when the |
| * transmission could not take place due to activity on the channel, OT_ERROR_ABORT when |
| * transmission was aborted for other reasons. |
| * |
| */ |
| extern void otPlatDiagRadioTransmitDone(otInstance *aInstance, otRadioFrame *aFrame, otError aError); |
| |
| /** |
| * The radio driver calls this method to notify OpenThread diagnostics module of a received frame. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the received frame or NULL if the receive operation failed. |
| * @param[in] aError OT_ERROR_NONE when successfully received a frame, OT_ERROR_ABORT when reception |
| * was aborted and a frame was not received, OT_ERROR_NO_BUFS when a frame could not be |
| * received due to lack of rx buffer space. |
| * |
| */ |
| extern void otPlatDiagRadioReceiveDone(otInstance *aInstance, otRadioFrame *aFrame, otError aError); |
| |
| /** |
| * This method begins the energy scan sequence on the radio. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aScanChannel The channel to perform the energy scan on. |
| * @param[in] aScanDuration The duration, in milliseconds, for the channel to be scanned. |
| * |
| * @retval OT_ERROR_NONE Successfully started scanning the channel. |
| * @retval OT_ERROR_NOT_IMPLEMENTED The radio doesn't support energy scanning. |
| */ |
| otError otPlatRadioEnergyScan(otInstance *aInstance, uint8_t aScanChannel, uint16_t aScanDuration); |
| |
| /** |
| * The radio driver calls this method to notify OpenThread that the energy scan is complete. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aEnergyScanMaxRssi The maximum RSSI encountered on the scanned channel. |
| * |
| */ |
| extern void otPlatRadioEnergyScanDone(otInstance *aInstance, int8_t aEnergyScanMaxRssi); |
| |
| /** |
| * Get the radio receive sensitivity value. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @returns The radio receive sensitivity value in dBm. |
| */ |
| int8_t otPlatRadioGetReceiveSensitivity(otInstance *aInstance); |
| |
| /** |
| * @} |
| * |
| */ |
| |
| /** |
| * @} |
| * |
| */ |
| |
| #ifdef __cplusplus |
| } // end of extern "C" |
| #endif |
| |
| #endif // RADIO_H_ |