/* ------------------------------------------
 * Copyright (c) 2016, Synopsys, Inc. All rights reserved.

 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:

 * 1) Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.

 * 2) Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation and/or
 * other materials provided with the distribution.

 * 3) Neither the name of the Synopsys, Inc., nor the names of its contributors may
 * be used to endorse or promote products derived from this software without
 * specific prior written permission.

 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * \version 2016.05
 * \date 2014-06-16
 * \author Huaqi Fang(Huaqi.Fang@synopsys.com)
--------------------------------------------- */

/**
 * \defgroup    DEVICE_HAL_UART     UART Device HAL Interface
 * \ingroup DEVICE_HAL_DEF
 * \brief   Definitions for uart device hardware layer (\ref dev_uart.h)
 * \details Provide unified APIs for uart driver to implement.
 *  Here is a diagram for the uart interface.
 *
 *  \htmlonly
 *  <div class="imagebox">
 *      <div style="width: 600px">
 *          <img src="pic/dev_uart_hal.jpg" alt="UART Device HAL Interface Diagram"/>
 *          <p>UART Device HAL Interface Diagram</p>
 *      </div>
 *  </div>
 *  \endhtmlonly
 *
 * ### Reference Links
 *     * [Serial Port](https://en.wikipedia.org/wiki/Serial_port)
 *
 * @{6
 *
 * \file
 * \brief   uart device hardware layer definitions
 * \details Provide common definitions for uart device,
 *  then software developer can develop uart driver
 *  following this definitions, and the applications
 *  can directly call this definition to realize functions
 *
 */

#ifndef _DEVICE_HAL_UART_H_
#define _DEVICE_HAL_UART_H_

#include "device/device_hal/inc/dev_common.h"

/**
 * \defgroup    DEVICE_HAL_UART_BAUD    UART Device Baudrate Definitions
 * \ingroup DEVICE_HAL_UART
 * \brief   Macros for uart baudrate.
 * \details Definitions for baudrate from 4800 to 115200bps.
 * @{
 */
/*
 * defines for uart baudrates
 */
#define UART_BAUDRATE_110           (110)       /*!< uart baudrate 110bps */
#define UART_BAUDRATE_300           (300)       /*!< uart baudrate 300bps */
#define UART_BAUDRATE_600           (600)       /*!< uart baudrate 600bps */
#define UART_BAUDRATE_1200          (1200)      /*!< uart baudrate 1200bps */
#define UART_BAUDRATE_2400          (2400)      /*!< uart baudrate 2400bps */
#define UART_BAUDRATE_4800          (4800)      /*!< uart baudrate 4800bps */
#define UART_BAUDRATE_9600          (9600)      /*!< uart baudrate 9600bps */
#define UART_BAUDRATE_14400         (14400)     /*!< uart baudrate 14400bps */
#define UART_BAUDRATE_19200         (19200)     /*!< uart baudrate 19200bps */
#define UART_BAUDRATE_38400         (38400)     /*!< uart baudrate 38400bps */
#define UART_BAUDRATE_57600         (57600)     /*!< uart baudrate 57600bps */
#define UART_BAUDRATE_115200            (115200)    /*!< uart baudrate 115200bps */
#define UART_BAUDRATE_230400            (230400)    /*!< uart baudrate 230400bps */
#define UART_BAUDRATE_460800            (460800)    /*!< uart baudrate 460800bps */
#define UART_BAUDRATE_921600            (921600)    /*!< uart baudrate 921600bps */
/** @} */

/**
 * \defgroup    DEVICE_HAL_UART_FORMAT  UART Device Format Definitions
 * \ingroup DEVICE_HAL_UART
 * \brief   Macros for uart format.
 * \details Definitions for uart format like databits, parity, stopbits.
 * @{
 */
/**
 * UART Device Parity Types Enum
 */
typedef enum
{
    UART_PARITY_NONE  = 0,  /*!< no parity bit */
    UART_PARITY_ODD   = 1,  /*!< odd parity bit */
    UART_PARITY_EVEN  = 2,  /*!< even parity bit */
    UART_PARITY_MARK  = 3,  /*!< mark parity bit, always logical 1 */
    UART_PARITY_SPACE = 4   /*!< space parity bit, always logical 0 */
} UART_PARITY;

/**
 * UART Device Stop Bits Enum
 */
typedef enum
{
    UART_STPBITS_ONE     = 0,   /*!< 1 stop bit */
    UART_STPBITS_ONEHALF = 1,   /*!< 1.5 stop bits */
    UART_STPBITS_TWO     = 2    /*!< 2 stop bits */
} UART_STOPBITS;

/**
 * UART DPS Format: databits/parity/stopbits
 */
typedef struct uart_dps_format
{
    uint32_t databits;  /*!< data bits */
    UART_PARITY parity; /*!< parity bit type */
    UART_STOPBITS stopbits; /*!< stop bits */
} UART_DPS_FORMAT;

#define UART_DATABITS_DEFAULT   8   /*!< default data bits */

/** Default UART DPS format */
static const UART_DPS_FORMAT dps_format_default = {UART_DATABITS_DEFAULT, UART_PARITY_NONE, UART_STPBITS_ONE};
/** @} */

/**
 * UART Device Hardware Flow Control Types Enum
 */
typedef enum
{
    UART_FC_NONE = 0,   /*!< Non hardware flow control */
    UART_FC_RTS  = 1,   /*!< Request To Send */
    UART_FC_CTS  = 2,   /*!< Clear To Send */
    UART_FC_BOTH = 3    /*!< Both hardware flow control methods */
} UART_HW_FLOW_CONTROL;
/** Default hardware flow control method */
static const UART_HW_FLOW_CONTROL hwfc_default = UART_FC_NONE;

/**
 * \defgroup    DEVICE_HAL_UART_CTRLCMD     UART Device Control Commands
 * \ingroup DEVICE_HAL_UART
 * \brief   Definitions for uart control command, used in \ref dev_uart::uart_control "UART IO Control"
 * \details These commands defined here can be used in user code directly.
 * - Parameters Usage
 *   - For passing parameters like integer, just use uint32_t/int32_t to directly pass values
 *   - For passing parameters for a structure, please use pointer to pass values
 *   - For getting some data, please use pointer to store the return data
 * - Common Return Values
 *   - \ref E_OK,   Control device successfully
 *   - \ref E_CLSED,    Device is not opened
 *   - \ref E_OBJ,  Device object is not valid or not exists
 *   - \ref E_PAR,  Parameter is not valid for current control command
 *   - \ref E_SYS,  Control device failed, due to hardware issues such as device is disabled
 *   - \ref E_CTX,  Control device failed, due to different reasons like in transfer state
 *   - \ref E_NOSPT,    Control command is not supported or not valid
 * @{
 */
/**
 * Set \ref dev_uart_info::baudrate "uart baudrate".
 * - Param type : uint32_t
 * - Param usage : uart baudrate, must above zero. Here is a list of \ref DEVICE_HAL_UART_BAUD "possible baudrates"
 * - Return value explanation :
 */
#define UART_CMD_SET_BAUD           DEV_SET_SYSCMD(0)
/**
 * Get \ref dev_uart_info::status "current device status"
 * - Param type : uint32_t *
 * - Param usage : store result of current status
 * - Return value explanation :
 */
#define UART_CMD_GET_STATUS         DEV_SET_SYSCMD(1)
/**
 * Enable uart device
 * - Param type : NULL
 * - Param usage : param is not required
 * - Return value explanation :
 */
#define UART_CMD_ENA_DEV            DEV_SET_SYSCMD(2)
/**
 * Disable uart device, when device is disabled,
 * only \ref UART_CMD_ENA_DEV, \ref UART_CMD_DIS_DEV and
 * \ref UART_CMD_GET_STATUS commands can be executed,
 * other commands will return \ref E_SYS
 * - Param type : NULL
 * - Param usage : param is not required
 * - Return value explanation :
 */
#define UART_CMD_DIS_DEV            DEV_SET_SYSCMD(3)
/**
 * Flush uart device output
 * - Param type : NULL
 * - Param usage : param is not required
 * - Return value explanation :
 */
#define UART_CMD_FLUSH_OUTPUT           DEV_SET_SYSCMD(4)
/**
 * Get how many bytes space in uart are available to transmit,
 * this can be used in interrupt callback functions,
 * cooperate with \ref dev_uart::uart_write "uart_write" API to realize non-blocked write
 * - Param type : int32_t *
 * - Param usage : store the write available bytes, > 0 for available bytes, 0 for not available
 * - Return value explanation :
 */
#define UART_CMD_GET_TXAVAIL            DEV_SET_SYSCMD(5)
/**
 * Get how many bytes in uart are available to receive,
 * this can be used in interrupt callback functions,
 * cooperate with \ref dev_uart::uart_read "uart_read" API to realize non-blocked read
 * - Param type : int32_t *
 * - Param usage : store the read available bytes, > 0 for available bytes, 0 for not available
 * - Return value explanation :
 */
#define UART_CMD_GET_RXAVAIL            DEV_SET_SYSCMD(6)
/**
 * Cause a break condition to be transmitted to the receiving device
 * - Param type : NULL
 * - Param usage : param is not required
 * - Return value explanation :
 */
#define UART_CMD_BREAK_SET          DEV_SET_SYSCMD(7)
/**
 * Clear break condition and return to normal
 * - Param type : NULL
 * - Param usage : param is not required
 * - Return value explanation :
 */
#define UART_CMD_BREAK_CLR          DEV_SET_SYSCMD(8)
/**
 * Change uart \ref dev_uart_info::dps_format "D/P/S(Data/Parity/Stop) format"
 * - Param type : \ref UART_DPS_FORMAT *
 * - Param usage : uart dps format including databits, parity and stopbits
 * - Return value explanation :
 */
#define UART_CMD_SET_DPS_FORMAT         DEV_SET_SYSCMD(9)
/**
 * Set uart device \ref dev_uart_info::hwfc "hardware flow control"
 * - Param type : \ref UART_HW_FLOW_CONTROL
 * - Param usage : uart dps format including databits, parity and stopbits
 * - Return value explanation :
 */
#define UART_CMD_SET_HWFC           DEV_SET_SYSCMD(10)
/**
 * Set \ref dev_uart_cbs::tx_cb "uart transmit success callback" function
 * when all required bytes are transmitted for interrupt method
 * - Param type : \ref DEV_CALLBACK * or NULL
 * - Param usage : transmit success callback function for uart
 * - Return value explanation :
 */
#define UART_CMD_SET_TXCB           DEV_SET_SYSCMD(11)
/**
 * Set \ref dev_uart_cbs::rx_cb "uart receive success callback" function
 * when all required bytes are received for interrupt method
 * - Param type : \ref DEV_CALLBACK * or NULL
 * - Param usage : receive success callback function for uart
 * - Return value explanation :
 */
#define UART_CMD_SET_RXCB           DEV_SET_SYSCMD(12)
/**
 * Set \ref dev_uart_cbs::err_cb "uart transfer error callback" function
 * when something error happened for interrupt method
 * - Param type : \ref DEV_CALLBACK * or NULL
 * - Param usage : transfer error callback function for uart
 * - Return value explanation :
 */
#define UART_CMD_SET_ERRCB          DEV_SET_SYSCMD(13)
/**
 * Set transmit buffer via interrupt, and it will set \ref dev_uart_info::tx_buf "tx_buf"
 * - Param type : DEV_BUFFER * or NULL
 * - Param usage : buffer structure pointer, if param is NULL, then it will set tx_buf to NULL
 * - Return value explanation :
 */
#define UART_CMD_SET_TXINT_BUF          DEV_SET_SYSCMD(14)
/**
 * Set receive buffer via interrupt, and it will set \ref dev_uart_info::rx_buf "rx_buf"
 * - Param type : DEV_BUFFER * or NULL
 * - Param usage : buffer structure pointer, if param is NULL, then it will set rx_buf to NULL
 * - Return value explanation :
 */
#define UART_CMD_SET_RXINT_BUF          DEV_SET_SYSCMD(15)
/**
 * Enable or disable transmit interrupt
 * - Param type : uint32_t
 * - Param usage : enable(none-zero) or disable(zero) flag
 * - Return value explanation :
 */
#define UART_CMD_SET_TXINT          DEV_SET_SYSCMD(16)
/**
 * Enable or disable receive interrupt
 * - Param type : uint32_t
 * - Param usage : enable(none-zero) or disable(zero) flag
 * - Return value explanation :
 */
#define UART_CMD_SET_RXINT          DEV_SET_SYSCMD(17)
/**
 * Abort current interrupt transmit operation if tx interrupt enabled,
 * it will disable transmit interrupt, and set \ref DEV_IN_TX_ABRT
 * in \ref dev_uart_info::status "status" variable,
 * and call the transmit callback function, when tx callback is finished,
 * it will clear \ref DEV_IN_TX_ABRT and return
 * - Param type : NULL
 * - Param usage :
 * - Return value explanation :
 */
#define UART_CMD_ABORT_TX           DEV_SET_SYSCMD(18)
/**
 * Abort current interrupt receive operation if rx interrupt enabled,
 * it will disable receive interrupt, and set \ref DEV_IN_TX_ABRT
 * in \ref dev_uart_info::status "status" variable,
 * and call the receive callback function, when rx callback is finished,
 * it will clear \ref DEV_IN_TX_ABRT and return
 * - Param type : NULL
 * - Param usage :
 * - Return value explanation :
 */
#define UART_CMD_ABORT_RX           DEV_SET_SYSCMD(19)

/** @} */

/**
 * \defgroup    DEVICE_HAL_UART_CALLBACK    UART Interrupt callback functions
 * \ingroup DEVICE_HAL_UART
 * \brief   callback function structure for UART device
 * @{
 */
typedef struct dev_uart_cbs
{
    DEV_CALLBACK tx_cb; /*!< uart data transmit success required bytes callback */
    DEV_CALLBACK rx_cb; /*!< uart data receive success required bytes callback */
    DEV_CALLBACK err_cb;    /*!< uart error callback */
} DEV_UART_CBS, *DEV_UART_CBS_PTR;
/** @} */

/**
 * \defgroup    DEVICE_HAL_UART_DEVSTRUCT   UART Device Interface Definition
 * \ingroup DEVICE_HAL_UART
 * \brief   Contains definitions of uart device interface structure.
 * \details This structure will be used in user implemented code, which was called
 *     \ref DEVICE_IMPL "Device Driver Implement Layer" for uart to use in implementation code.
 *     Application developer should use the UART API provided here to access to UART devices.
 *     BSP developer should follow the API definition to implement UART device drivers.
 * @{
 */
/**
 * \brief   UART information struct definition
 * \details informations about uart open count, working status,
 *     baudrate, uart registers and ctrl structure, uart dps format
 */
typedef struct dev_uart_info
{
    void *uart_ctrl;    /*!< uart control related pointer, implemented by bsp developer, and this should be set during uart object implementation */
    uint32_t opn_cnt;   /*!< uart open count, open it will increase 1, close it will decrease 1, 0 for close, >0 for open */
    uint32_t status;    /*!< current working status, refer to \ref DEVICE_HAL_COMMON_DEVSTATUS, this should be \ref DEV_ENABLED for first open */
    uint32_t baudrate;  /*!< uart baud rate, this should be the value of baud passing by uart_open if first successfully opened */
    UART_DPS_FORMAT
    dps_format; /*!< D/P/S format settings for uart device, here is \ref dps_format_default "default settings for first open" */
    UART_HW_FLOW_CONTROL
    hwfc;  /*!< UART hardware flow control, here is \ref hwfc_default "default hardware flow control settings for first open" */
    DEV_BUFFER tx_buf;  /*!< transmit buffer via interrupt, this should be all zero for first open */
    DEV_BUFFER rx_buf;  /*!< receive buffer via interrupt, this should be all zero for first open */
    DEV_UART_CBS
    uart_cbs;  /*!< uart callbacks, callback arguments should be \ref DEV_UART * or NULL, this should be all NULL for first open */
    void *extra;        /*!< a extra pointer to get hook to applications which should not used by bsp developer,
                    this should be NULL for first open and you can \ref DEV_UART_INFO_SET_EXTRA_OBJECT "set"
                    or \ref DEV_UART_INFO_GET_EXTRA_OBJECT "get" the extra information pointer */
} DEV_UART_INFO, * DEV_UART_INFO_PTR;

/** Set extra information pointer of uart info */
#define DEV_UART_INFO_SET_EXTRA_OBJECT(uart_info_ptr, extra_info)   (uart_info_ptr)->extra = (void *)(extra_info)
/** Get extra information pointer of uart info */
#define DEV_UART_INFO_GET_EXTRA_OBJECT(uart_info_ptr)           ((uart_info_ptr)->extra)

/**
 * \brief   UART device interface definition
 * \details Define uart device interface, like uart information structure,
 *  provide functions to open/close/control uart, send/receive data by uart
 * \note    All this details are implemented by user in user porting code
 */
typedef struct dev_uart
{
    DEV_UART_INFO uart_info;                /*!< UART device information */
    int32_t (*uart_open)(uint32_t baud);            /*!< Open uart device */
    int32_t (*uart_close)(void);                /*!< Close uart device */
    int32_t (*uart_control)(uint32_t ctrl_cmd, void *param);    /*!< Control uart device */
    int32_t (*uart_write)(const void *data, uint32_t len);  /*!< Send data by uart device(blocked) */
    int32_t (*uart_read)(void *data, uint32_t len);     /*!< Read data from uart device(blocked) */
} DEV_UART, * DEV_UART_PTR;

/**
 * \fn      int32_t (* dev_uart::uart_open) (uint32_t baud)
 * \details open an uart device with defined baudrate
 * \param[in]   baud    \ref DEVICE_HAL_UART_BAUD "initial baudrate of uart", must > 0
 * \retval  E_OK    Open successfully without any issues
 * \retval  E_OPNED If device was opened before with different parameters,
 *          then just increase the \ref dev_uart_info::opn_cnt "opn_cnt" and return \ref E_OPNED
 * \retval  E_OBJ   Device object is not valid
 * \retval  E_PAR   Parameter is not valid
 * \retval  E_NOSPT Open settings are not supported
 */

/**
 * \fn      int32_t (* dev_uart::uart_close) (void)
 * \details close an uart device, just decrease the \ref dev_uart_info::opn_cnt "opn_cnt",
 *      if \ref dev_uart_info::opn_cnt "opn_cnt" equals 0, then close the device
 * \retval  E_OK    Close successfully without any issues(including scenario that device is already closed)
 * \retval  E_OPNED Device is still opened, the device \ref dev_uart_info::opn_cnt "opn_cnt" decreased by 1
 * \retval  E_OBJ   Device object is not valid
 */

/**
 * \fn      int32_t (* dev_uart::uart_control) (uint32_t ctrl_cmd, void *param)
 * \details control an uart device by \ref ctrl_cmd, with passed \ref param.
 *  you can control uart device using predefined uart control commands defined using \ref DEV_SET_SYSCMD
 *  (which must be implemented by bsp developer), such as \ref UART_CMD_SET_BAUD "change baudrate",
 *  \ref UART_CMD_FLUSH_OUTPUT "flush output" and \ref DEVICE_HAL_UART_CTRLCMD "more".
 *  And you can also control uart device using your own specified commands defined using \ref DEV_SET_USRCMD,
 *  but these specified commands should be defined in your own uart device driver implementation.
 * \param[in]       ctrl_cmd    \ref DEVICE_HAL_UART_CTRLCMD "control command", to change or get some thing related to uart
 * \param[in,out]   param       parameters that maybe argument of the command, or return values of the command
 * \retval  E_OK    Control device successfully
 * \retval  E_CLSED Device is not opened
 * \retval  E_OBJ   Device object is not valid or not exists
 * \retval  E_PAR   Parameter is not valid for current control command
 * \retval  E_SYS   Control device failed, due to hardware issues, such as device is disabled
 * \retval  E_CTX   Control device failed, due to different reasons like in transfer state
 * \retval  E_NOSPT Control command is not supported or not valid
 */

/**
 * \fn      int32_t (* dev_uart::uart_write) (const void *data, uint32_t len)
 * \details send \ref data through uart with defined \ref len(blocked).
 * \param[in]   data    pointer to data need to send by uart, must not be NULL
 * \param[in]   len length of data to be sent, must > 0
 * \retval  >0  Byte count that was successfully sent for poll method
 * \retval  E_OBJ   Device object is not valid or not exists
 * \retval  E_PAR   Parameter is not valid
 * \retval  E_SYS   Can't write data to hardware due to hardware issues, such as device is disabled
 */

/**
 * \fn      int32_t (* dev_uart::uart_read) (void *data, uint32_t len)
 * \details receive \ref data of defined \ref len through uart(blocked).
 * \param[out]  data    pointer to data need to received by uart, must not be NULL
 * \param[in]   len length of data to be received, must > 0
 * \retval  >0  Byte count that was successfully received for poll method
 * \retval  E_OBJ   Device object is not valid or not exists
 * \retval  E_PAR   Parameter is not valid
 * \retval  E_SYS   Can't receive data from hardware due to hardware issues, such as device is disabled
 */
/** @} */

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \brief   get an \ref dev_uart "uart device" by uart device id.
 *  For how to use uart device hal refer to \ref DEVICE_HAL_UART_DEVSTRUCT "Functions in uart device structure"
 * \param[in]   uart_id id of uart, defined by user
 * \retval  !NULL   pointer to an \ref dev_uart "uart device structure"
 * \retval  NULL    failed to find the uart device by \ref uart_id
 * \note    need to implemented by user in user code
 */
extern DEV_UART_PTR uart_get_dev(int32_t uart_id);

#ifdef __cplusplus
}
#endif

/** @} */
#endif /* _DEVICE_HAL_UART_H_ */