/* ------------------------------------------
 * Copyright (c) 2016, Synopsys, Inc. All rights reserved.

 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:

 * 1) Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.

 * 2) Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation and/or
 * other materials provided with the distribution.

 * 3) Neither the name of the Synopsys, Inc., nor the names of its contributors may
 * be used to endorse or promote products derived from this software without
 * specific prior written permission.

 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * \version 2016.05
 * \date 2014-07-15
 * \author Wayne Ren(Wei.Ren@synopsys.com)
--------------------------------------------- */

/**
 * \file
 * \ingroup ARC_HAL_MISC
 * \brief common macro definitions for assembly file
 */
/** @cond ARC_HAL_ASM_COMMON */

#ifndef _ARC_HAL_ASM_COMMON_H_
#define _ARC_HAL_ASM_COMMON_H_

#include "embARC_BSP_config.h"
#include "arc_feature_config.h"

/* Note on the LD/ST addr modes with addr reg wback
 *
 * LD.a same as LD.aw
 *
 * LD.a    reg1, [reg2, x]  => Pre Incr
 *      Eff Addr for load = [reg2 + x]
 *
 * LD.ab   reg1, [reg2, x]  => Post Incr
 *      Eff Addr for load = [reg2]
 */
#if defined(__GNU__)
.macro PUSH reg
st.a    \reg, [sp, -4]
.endm

.macro PUSHAX aux
lr  r10, [\aux]
PUSH    r10
.endm

.macro POP reg
ld.ab   \reg, [sp, 4]
.endm

.macro POPAX aux
POP r10
sr  r10, [\aux]
.endm
#else
.macro PUSH, reg
st.a    reg, [sp, -4]
.endm

.macro PUSHAX, aux
lr  r10, [aux]
PUSH    r10
.endm

.macro POP, reg
ld.ab   reg, [sp, 4]
.endm

.macro POPAX, aux
POP r10
sr  r10, [aux]
.endm
#endif

/*--------------------------------------------------------------
 * Helpers to save/restore callee-saved regs:
 * used by several macros below
 *-------------------------------------------------------------*/
.macro SAVE_CALLEE_REGS
PUSH    r13
PUSH    r14
PUSH    r15
#ifndef ARC_FEATURE_RF16
PUSH    r16
PUSH    r17
PUSH    r18
PUSH    r19
PUSH    r20
PUSH    r21
PUSH    r22
PUSH    r23
PUSH    r24
PUSH    r25
#endif
.endm

.macro RESTORE_CALLEE_REGS
#ifndef ARC_FEATURE_RF16
POP r25
POP r24
POP r23
POP r22
POP r21
POP r20
POP r19
POP r18
POP r17
POP r16
#endif
POP r15
POP r14
POP r13
.endm

.macro CLEAR_CALLEE_REGS
#ifndef ARC_FEATURE_RF16
mov r25, 0
mov r24, 0
mov r23, 0
mov r22, 0
mov r21, 0
mov r20, 0
mov r19, 0
mov r18, 0
mov r17, 0
mov r16, 0
#endif
mov r15, 0
mov r14, 0
mov r13, 0
.endm

.macro CLEAR_SCRATCH_REGS
mov r1, 0
mov     r2, 0
mov r3, 0
mov r4, 0
mov r5, 0
mov r6, 0
mov r7, 0
mov r8, 0
mov     r9, 0
mov r10, 0
mov r11, 0
mov r12, 0

mov     fp, 0
mov     r29, 0
mov     r30, 0
.endm


.macro SAVE_LP_REGS
PUSH    r60
PUSHAX  AUX_LP_START
PUSHAX  AUX_LP_END
.endm

.macro RESTORE_LP_REGS
POPAX   AUX_LP_END
POPAX   AUX_LP_START
POP r10
/* must not use the LP_COUNT register(r60) as the destination of multi-cycle instruction */
mov r60, r10

.endm

.macro SAVE_R0_TO_R12
PUSH    r0
PUSH    r1
PUSH    r2
PUSH    r3
#ifndef ARC_FEATURE_RF16
PUSH    r4
PUSH    r5
PUSH    r6
PUSH    r7
PUSH    r8
PUSH    r9
#endif
PUSH    r10
PUSH    r11
PUSH    r12
.endm

.macro RESTORE_R0_TO_R12
POP r12
POP r11
POP r10
#ifndef ARC_FEATURE_RF16
POP r9
POP r8
POP r7
POP r6
POP r5
POP r4
#endif
POP r3
POP r2
POP r1
POP r0
.endm

.macro SAVE_CODE_DENSITY
PUSHAX  AUX_JLI_BASE
PUSHAX  AUX_LDI_BASE
PUSHAX  AUX_EI_BASE
.endm

.macro RESTORE_CODE_DENSITY
POPAX   AUX_EI_BASE
POPAX   AUX_LDI_BASE
POPAX   AUX_JLI_BASE
.endm

/* todo: check the contents of NON_SCRATCH_REGS in debug */
.macro SAVE_NONSCRATCH_REGS
/* r0-r12 are saved by caller function */
PUSH    gp
PUSH    fp
PUSH    blink
SAVE_CALLEE_REGS
.endm

.macro RESTORE_NONSCRATCH_REGS
RESTORE_CALLEE_REGS
POP blink
POP fp
POP gp
.endm


.macro SAVE_FIQ_EXC_REGS
#ifndef ARC_FEATURE_RGF_BANKED_REGS
SAVE_R0_TO_R12

PUSH    gp
PUSH    fp
PUSH    r30     /* general purpose */
PUSH    blink

#else
#if ARC_FEATURE_RGF_BANKED_REGS != 4 && ARC_FEATURE_RGF_BANKED_REGS != 8 && \
    ARC_FEATURE_RGF_BANKED_REGS != 16  && ARC_FEATURE_RGF_BANKED_REGS != 32
#error  "unsupported ARC_FEATURE_RGF_BANKED_REGS"
#endif

#if ARC_FEATURE_RGF_BANKED_REGS == 4 || ARC_FEATURE_BANKED_REGS == 8 || \
    ARC_FEATURE_RGF_BANKED_REGS == 16
PUSH    r4
PUSH    r5
PUSH    r6
PUSH    r7
PUSH    r8
PUSH    r9
#endif

#if ARC_FEATURE_RGF_BANKED_REGS == 4 || ARC_FEATURE_BANKED_REGS == 8
PUSH    r10
PUSH    r11
#endif

#if ARC_FEATURE_RGF_BANKED_REGS == 4
PUSH    r12
#endif

#if ARC_FEATURE_RGF_BANKED_REGS == 4 || ARC_FEATURE_BANKED_REGS == 8
PUSH    gp
PUSH    fp
PUSH    r30     /* general purpose */
PUSH    blink
#endif

#endif /* #ifndef ARC_FEATURE_RGF_BANKED_REGS */

#ifdef ARC_FEATURE_CODE_DENSITY
SAVE_CODE_DENSITY
#endif
SAVE_LP_REGS
.endm

.macro RESTORE_FIQ_EXC_REGS
RESTORE_LP_REGS
#ifdef  ARC_FEATURE_CODE_DENSITY
RESTORE_CODE_DENSITY
#endif

#ifndef ARC_FEATURE_RGF_BANKED_REGS
POP blink
POP r30
POP fp
POP gp

RESTORE_R0_TO_R12
#else

#if ARC_FEATURE_RGF_BANKED_REGS != 4 && ARC_FEATURE_RGF_BANKED_REGS != 8 && \
    ARC_FEATURE_RGF_BANKED_REGS != 16 && ARC_FEATURE_RGF_BANKED_REGS != 32
#error  "unsupported ARC_FEATURE_RGF_BANKED_REGS"
#endif

#if ARC_FEATURE_RGF_BANKED_REGS == 4 || ARC_FEATURE_BANKED_REGS == 8
POP blink
POP r30
POP fp
POP gp
#endif

#if ARC_FEATURE_RGF_BANKED_REGS == 4
POP r12
#endif

#if ARC_FEATURE_RGF_BANKED_REGS == 4 || ARC_FEATURE_BANKED_REGS == 8
POP     r11
POP     r10
#endif

#if ARC_FEATURE_RGF_BANKED_REGS == 4 || ARC_FEATURE_BANKED_REGS == 8 || \
    ARC_FEATURE_RGF_BANKED_REGS == 16
POP     r9
POP     r8
POP     r7
POP     r6
POP     r5
POP     r4
#endif

#endif  /* #ifndef ARC_FEATURE_RGF_BANKED_REGS */
.endm

/* normal interrupt prologue, pc, status and r0-r11 are saved by hardware */
.macro INTERRUPT_PROLOGUE
PUSH    r12
PUSH    gp
PUSH    fp
PUSH    ilink
PUSH    r30

sub sp, sp, 4 /* skip bta */
.endm


/* normal interrupt epilogue, pc, status and r0-r11 are restored by hardware */
.macro INTERRUPT_EPILOGUE
add sp, sp, 4 /* skip bta */

POP r30
POP ilink
POP fp
POP gp
POP r12
.endm

#if SECURESHIELD_VERSION == 2
/* exception prologue, create the same frame of interrupt manually */
.macro EXCEPTION_PROLOGUE
st.as   r10, [sp, -6]   /* save r10 first, free up a register*/

PUSHAX  AUX_ERSTATUS
sub     sp, sp, 4 /* slot for SEC_STAT */
PUSHAX  AUX_ERRET

PUSH    blink

PUSH    r11
sub sp, sp, 4 /* r10 is  pushed before */
#ifndef ARC_FEATURE_RF16
PUSH    r9
PUSH    r8
PUSH    r7
PUSH    r6
PUSH    r5
PUSH    r4
#endif
PUSH    r3
PUSH    r2
PUSH    r1
PUSH    r0

#ifdef ARC_FEATURE_CODE_DENSITY
SAVE_CODE_DENSITY
#endif
SAVE_LP_REGS

PUSH    r12
PUSH    gp
PUSH    fp
PUSH    ilink
PUSH    r30

PUSHAX  AUX_ERBTA
.endm

/* exception epilogue, restore the same frame of interrupt manually */
.macro EXCEPTION_EPILOGUE
POPAX   AUX_ERBTA

POP r30
POP ilink
POP fp
POP gp
POP r12

RESTORE_LP_REGS

#ifdef ARC_FEATURE_CODE_DENSITY
RESTORE_CODE_DENSITY
#endif
POP r0
POP r1
POP r2
POP r3
#ifndef ARC_FEATURE_RF16
POP r4
POP r5
POP r6
POP r7
POP r8
POP r9
#endif
add sp, sp, 4 /* r10 will be popped finally */
POP r11

POP blink


POPAX   AUX_ERRET
add     sp, sp, 4  /* slot for SEC_STAT */
POPAX   AUX_ERSTATUS

ld.as   r10, [sp, -6]   /* restore r10 */
.endm
#else /* normal version */
/* exception prologue, create the same frame of interrupt manually */
.macro EXCEPTION_PROLOGUE
#ifdef  ARC_FEATURE_CODE_DENSITY
st.as   r10, [sp, -11]  /* save r10 first, free up a register*/
#else
st.as   r10, [sp, -8]
#endif
PUSHAX  AUX_ERSTATUS
PUSHAX  AUX_ERRET

#ifdef ARC_FEATURE_CODE_DENSITY
SAVE_CODE_DENSITY
#endif
SAVE_LP_REGS

PUSH    blink

PUSH    r11
sub sp, sp, 4 /* r10 is  pushed before */
#ifndef ARC_FEATURE_RF16
PUSH    r9
PUSH    r8
PUSH    r7
PUSH    r6
PUSH    r5
PUSH    r4
#endif
PUSH    r3
PUSH    r2
PUSH    r1
PUSH    r0

PUSH    r12
PUSH    gp
PUSH    fp
PUSH    ilink
PUSH    r30

PUSHAX  AUX_ERBTA
.endm

/* exception epilogue, restore the same frame of interrupt manually */
.macro EXCEPTION_EPILOGUE
POPAX   AUX_ERBTA

POP r30
POP ilink
POP fp
POP gp
POP r12

POP r0
POP r1
POP r2
POP r3
#ifndef ARC_FEATURE_RF16
POP r4
POP r5
POP r6
POP r7
POP r8
POP r9
#endif
add sp, sp, 4 /* r10 will be popped finally */
POP r11

POP blink

RESTORE_LP_REGS

#ifdef ARC_FEATURE_CODE_DENSITY
RESTORE_CODE_DENSITY
#endif

POPAX   AUX_ERRET
POPAX   AUX_ERSTATUS

#ifdef  ARC_FEATURE_CODE_DENSITY
ld.as   r10, [sp, -11]  /* restore r10 */
#else
ld.as   r10, [sp, -8]
#endif
.endm

#endif /* SECURESHIELD_VERSION == 2 */

#endif  /* _ARC_HAL_ASM_COMMON_H */
/** @endcond */