| /****************************************************************************** |
| * Filename: hw_adi_3_refsys_h |
| * Revised: 2016-03-14 09:20:59 +0100 (Mon, 14 Mar 2016) |
| * Revision: 45924 |
| * |
| * Copyright (c) 2015 - 2016, Texas Instruments Incorporated |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1) Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2) Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3) Neither the name of the ORGANIZATION nor the names of its contributors may |
| * be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ******************************************************************************/ |
| |
| #ifndef __HW_ADI_3_REFSYS_H__ |
| #define __HW_ADI_3_REFSYS_H__ |
| |
| //***************************************************************************** |
| // |
| // This section defines the register offsets of |
| // ADI_3_REFSYS component |
| // |
| //***************************************************************************** |
| // Analog Test Control |
| #define ADI_3_REFSYS_O_SPARE0 0x00000001 |
| |
| // Internal |
| #define ADI_3_REFSYS_O_REFSYSCTL0 0x00000002 |
| |
| // Internal |
| #define ADI_3_REFSYS_O_REFSYSCTL1 0x00000003 |
| |
| // Internal |
| #define ADI_3_REFSYS_O_REFSYSCTL2 0x00000004 |
| |
| // Internal |
| #define ADI_3_REFSYS_O_REFSYSCTL3 0x00000005 |
| |
| // DCDC Control 0 |
| #define ADI_3_REFSYS_O_DCDCCTL0 0x00000006 |
| |
| // DCDC Control 1 |
| #define ADI_3_REFSYS_O_DCDCCTL1 0x00000007 |
| |
| // DCDC Control 2 |
| #define ADI_3_REFSYS_O_DCDCCTL2 0x00000008 |
| |
| // DCDC Control 3 |
| #define ADI_3_REFSYS_O_DCDCCTL3 0x00000009 |
| |
| // Internal |
| #define ADI_3_REFSYS_O_DCDCCTL4 0x0000000A |
| |
| // Internal |
| #define ADI_3_REFSYS_O_DCDCCTL5 0x0000000B |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_SPARE0 |
| // |
| //***************************************************************************** |
| // Field: [7:0] SPARE0 |
| // |
| // Software should not rely on the value of a reserved. Writing any other value |
| // than the reset value may result in undefined behavior. |
| #define ADI_3_REFSYS_SPARE0_SPARE0_W 8 |
| #define ADI_3_REFSYS_SPARE0_SPARE0_M 0x000000FF |
| #define ADI_3_REFSYS_SPARE0_SPARE0_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_REFSYSCTL0 |
| // |
| //***************************************************************************** |
| // Field: [7:0] TESTCTL |
| // |
| // Internal. Only to be used through TI provided API. |
| // ENUMs: |
| // BMCOMPOUT Internal. Only to be used through TI provided API. |
| // VTEMP Internal. Only to be used through TI provided API. |
| // VREF0P8V Internal. Only to be used through TI provided API. |
| // VBGUNBUFF Internal. Only to be used through TI provided API. |
| // VBG Internal. Only to be used through TI provided API. |
| // IREF4U Internal. Only to be used through TI provided API. |
| // IVREF4U Internal. Only to be used through TI provided API. |
| // IPTAT2U Internal. Only to be used through TI provided API. |
| // NC Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_W 8 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_M 0x000000FF |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_S 0 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_BMCOMPOUT 0x00000080 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_VTEMP 0x00000040 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_VREF0P8V 0x00000020 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_VBGUNBUFF 0x00000010 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_VBG 0x00000008 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_IREF4U 0x00000004 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_IVREF4U 0x00000002 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_IPTAT2U 0x00000001 |
| #define ADI_3_REFSYS_REFSYSCTL0_TESTCTL_NC 0x00000000 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_REFSYSCTL1 |
| // |
| //***************************************************************************** |
| // Field: [7:3] TRIM_VDDS_BOD |
| // |
| // Internal. Only to be used through TI provided API. |
| // ENUMs: |
| // POS_27 Internal. Only to be used through TI provided API. |
| // POS_26 Internal. Only to be used through TI provided API. |
| // POS_25 Internal. Only to be used through TI provided API. |
| // POS_24 Internal. Only to be used through TI provided API. |
| // POS_31 Internal. Only to be used through TI provided API. |
| // POS_30 Internal. Only to be used through TI provided API. |
| // POS_29 Internal. Only to be used through TI provided API. |
| // POS_28 Internal. Only to be used through TI provided API. |
| // POS_19 Internal. Only to be used through TI provided API. |
| // POS_18 Internal. Only to be used through TI provided API. |
| // POS_17 Internal. Only to be used through TI provided API. |
| // POS_16 Internal. Only to be used through TI provided API. |
| // POS_23 Internal. Only to be used through TI provided API. |
| // POS_22 Internal. Only to be used through TI provided API. |
| // POS_21 Internal. Only to be used through TI provided API. |
| // POS_20 Internal. Only to be used through TI provided API. |
| // POS_11 Internal. Only to be used through TI provided API. |
| // POS_10 Internal. Only to be used through TI provided API. |
| // POS_9 Internal. Only to be used through TI provided API. |
| // POS_8 Internal. Only to be used through TI provided API. |
| // POS_15 Internal. Only to be used through TI provided API. |
| // POS_14 Internal. Only to be used through TI provided API. |
| // POS_13 Internal. Only to be used through TI provided API. |
| // POS_12 Internal. Only to be used through TI provided API. |
| // POS_3 Internal. Only to be used through TI provided API. |
| // POS_2 Internal. Only to be used through TI provided API. |
| // POS_1 Internal. Only to be used through TI provided API. |
| // POS_0 Internal. Only to be used through TI provided API. |
| // POS_7 Internal. Only to be used through TI provided API. |
| // POS_6 Internal. Only to be used through TI provided API. |
| // POS_5 Internal. Only to be used through TI provided API. |
| // POS_4 Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_W 5 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_M 0x000000F8 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_S 3 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_27 0x000000F8 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_26 0x000000F0 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_25 0x000000E8 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_24 0x000000E0 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_31 0x000000D8 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_30 0x000000D0 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_29 0x000000C8 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_28 0x000000C0 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_19 0x000000B8 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_18 0x000000B0 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_17 0x000000A8 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_16 0x000000A0 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_23 0x00000098 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_22 0x00000090 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_21 0x00000088 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_20 0x00000080 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_11 0x00000078 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_10 0x00000070 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_9 0x00000068 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_8 0x00000060 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_15 0x00000058 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_14 0x00000050 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_13 0x00000048 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_12 0x00000040 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_3 0x00000038 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_2 0x00000030 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_1 0x00000028 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_0 0x00000020 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_7 0x00000018 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_6 0x00000010 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_5 0x00000008 |
| #define ADI_3_REFSYS_REFSYSCTL1_TRIM_VDDS_BOD_POS_4 0x00000000 |
| |
| // Field: [2] BATMON_COMP_TEST_EN |
| // |
| // Internal. Only to be used through TI provided API. |
| // ENUMs: |
| // EN Internal. Only to be used through TI provided API. |
| // DIS Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL1_BATMON_COMP_TEST_EN 0x00000004 |
| #define ADI_3_REFSYS_REFSYSCTL1_BATMON_COMP_TEST_EN_M 0x00000004 |
| #define ADI_3_REFSYS_REFSYSCTL1_BATMON_COMP_TEST_EN_S 2 |
| #define ADI_3_REFSYS_REFSYSCTL1_BATMON_COMP_TEST_EN_EN 0x00000004 |
| #define ADI_3_REFSYS_REFSYSCTL1_BATMON_COMP_TEST_EN_DIS 0x00000000 |
| |
| // Field: [1:0] TESTCTL |
| // |
| // Internal. Only to be used through TI provided API. |
| // ENUMs: |
| // IPTAT1U Internal. Only to be used through TI provided API. |
| // BMCOMPIN Internal. Only to be used through TI provided API. |
| // NC Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL1_TESTCTL_W 2 |
| #define ADI_3_REFSYS_REFSYSCTL1_TESTCTL_M 0x00000003 |
| #define ADI_3_REFSYS_REFSYSCTL1_TESTCTL_S 0 |
| #define ADI_3_REFSYS_REFSYSCTL1_TESTCTL_IPTAT1U 0x00000002 |
| #define ADI_3_REFSYS_REFSYSCTL1_TESTCTL_BMCOMPIN 0x00000001 |
| #define ADI_3_REFSYS_REFSYSCTL1_TESTCTL_NC 0x00000000 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_REFSYSCTL2 |
| // |
| //***************************************************************************** |
| // Field: [7:4] TRIM_VREF |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL2_TRIM_VREF_W 4 |
| #define ADI_3_REFSYS_REFSYSCTL2_TRIM_VREF_M 0x000000F0 |
| #define ADI_3_REFSYS_REFSYSCTL2_TRIM_VREF_S 4 |
| |
| // Field: [1:0] TRIM_TSENSE |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL2_TRIM_TSENSE_W 2 |
| #define ADI_3_REFSYS_REFSYSCTL2_TRIM_TSENSE_M 0x00000003 |
| #define ADI_3_REFSYS_REFSYSCTL2_TRIM_TSENSE_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_REFSYSCTL3 |
| // |
| //***************************************************************************** |
| // Field: [7] BOD_BG_TRIM_EN |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL3_BOD_BG_TRIM_EN 0x00000080 |
| #define ADI_3_REFSYS_REFSYSCTL3_BOD_BG_TRIM_EN_M 0x00000080 |
| #define ADI_3_REFSYS_REFSYSCTL3_BOD_BG_TRIM_EN_S 7 |
| |
| // Field: [6] VTEMP_EN |
| // |
| // Internal. Only to be used through TI provided API. |
| // ENUMs: |
| // EN Internal. Only to be used through TI provided API. |
| // DIS Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL3_VTEMP_EN 0x00000040 |
| #define ADI_3_REFSYS_REFSYSCTL3_VTEMP_EN_M 0x00000040 |
| #define ADI_3_REFSYS_REFSYSCTL3_VTEMP_EN_S 6 |
| #define ADI_3_REFSYS_REFSYSCTL3_VTEMP_EN_EN 0x00000040 |
| #define ADI_3_REFSYS_REFSYSCTL3_VTEMP_EN_DIS 0x00000000 |
| |
| // Field: [5:0] TRIM_VBG |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_REFSYSCTL3_TRIM_VBG_W 6 |
| #define ADI_3_REFSYS_REFSYSCTL3_TRIM_VBG_M 0x0000003F |
| #define ADI_3_REFSYS_REFSYSCTL3_TRIM_VBG_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_DCDCCTL0 |
| // |
| //***************************************************************************** |
| // Field: [7:5] GLDO_ISRC |
| // |
| // Set charge and re-charge current level. |
| // 2's complement encoding. |
| // |
| // 0x0: Default 11mA. |
| // 0x3: Max 15mA. |
| // 0x4: Max 5mA |
| #define ADI_3_REFSYS_DCDCCTL0_GLDO_ISRC_W 3 |
| #define ADI_3_REFSYS_DCDCCTL0_GLDO_ISRC_M 0x000000E0 |
| #define ADI_3_REFSYS_DCDCCTL0_GLDO_ISRC_S 5 |
| |
| // Field: [4:0] VDDR_TRIM |
| // |
| // Set the VDDR voltage. |
| // Proprietary encoding. |
| // |
| // Increase voltage to max: 0x00, 0x01, 0x02 ... 0x15. |
| // Decrease voltage to min: 0x00, 0x1F, 0x1E, 0x1D ... 0x16. |
| // Step size = 16mV |
| // |
| // 0x00: Default, about 1.63V. |
| // 0x05: Typical voltage after trim voltage 1.71V. |
| // 0x15: Max voltage 1.96V. |
| // 0x16: Min voltage 1.47V. |
| #define ADI_3_REFSYS_DCDCCTL0_VDDR_TRIM_W 5 |
| #define ADI_3_REFSYS_DCDCCTL0_VDDR_TRIM_M 0x0000001F |
| #define ADI_3_REFSYS_DCDCCTL0_VDDR_TRIM_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_DCDCCTL1 |
| // |
| //***************************************************************************** |
| // Field: [7:6] IPTAT_TRIM |
| // |
| // Trim GLDO bias current. |
| // Proprietary encoding. |
| // |
| // 0x0: Default |
| // 0x1: Increase GLDO bias by 1.3x. |
| // 0x2: Increase GLDO bias by 1.6x. |
| // 0x3: Decrease GLDO bias by 0.7x. |
| #define ADI_3_REFSYS_DCDCCTL1_IPTAT_TRIM_W 2 |
| #define ADI_3_REFSYS_DCDCCTL1_IPTAT_TRIM_M 0x000000C0 |
| #define ADI_3_REFSYS_DCDCCTL1_IPTAT_TRIM_S 6 |
| |
| // Field: [5] VDDR_OK_HYST |
| // |
| // Increase the hysteresis for when VDDR is considered ok. |
| // |
| // 0: Hysteresis = 60mV |
| // 1: Hysteresis = 70mV |
| #define ADI_3_REFSYS_DCDCCTL1_VDDR_OK_HYST 0x00000020 |
| #define ADI_3_REFSYS_DCDCCTL1_VDDR_OK_HYST_M 0x00000020 |
| #define ADI_3_REFSYS_DCDCCTL1_VDDR_OK_HYST_S 5 |
| |
| // Field: [4:0] VDDR_TRIM_SLEEP |
| // |
| // Set the min VDDR voltage threshold during sleep mode. |
| // Proprietary encoding. |
| // |
| // Increase voltage to max: 0x00, 0x01, 0x02 ... 0x15. |
| // Decrease voltage to min: 0x00, 0x1F, 0x1E, 0x1D ... 0x16. |
| // Step size = 16mV |
| // |
| // 0x00: Default, about 1.63V. |
| // 0x19: Typical voltage after trim voltage 1.52V. |
| // 0x15: Max voltage 1.96V. |
| // 0x16: Min voltage 1.47V. |
| #define ADI_3_REFSYS_DCDCCTL1_VDDR_TRIM_SLEEP_W 5 |
| #define ADI_3_REFSYS_DCDCCTL1_VDDR_TRIM_SLEEP_M 0x0000001F |
| #define ADI_3_REFSYS_DCDCCTL1_VDDR_TRIM_SLEEP_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_DCDCCTL2 |
| // |
| //***************************************************************************** |
| // Field: [6] TURNON_EA_SW |
| // |
| // Turn on erroramp switch |
| // |
| // 0: Erroramp Off (Default) |
| // 1: Erroramp On. Turns on GLDO error amp switch. |
| #define ADI_3_REFSYS_DCDCCTL2_TURNON_EA_SW 0x00000040 |
| #define ADI_3_REFSYS_DCDCCTL2_TURNON_EA_SW_M 0x00000040 |
| #define ADI_3_REFSYS_DCDCCTL2_TURNON_EA_SW_S 6 |
| |
| // Field: [5] TEST_VDDR |
| // |
| // Connect VDDR to ATEST bus |
| // |
| // 0: Not connected. |
| // 1: Connected |
| // |
| // Set TESTSEL = 0x0 first before setting this bit. |
| #define ADI_3_REFSYS_DCDCCTL2_TEST_VDDR 0x00000020 |
| #define ADI_3_REFSYS_DCDCCTL2_TEST_VDDR_M 0x00000020 |
| #define ADI_3_REFSYS_DCDCCTL2_TEST_VDDR_S 5 |
| |
| // Field: [4] BIAS_DIS |
| // |
| // Disable dummy bias current. |
| // |
| // 0: Dummy bias current on (Default) |
| // 1: Dummy bias current off |
| #define ADI_3_REFSYS_DCDCCTL2_BIAS_DIS 0x00000010 |
| #define ADI_3_REFSYS_DCDCCTL2_BIAS_DIS_M 0x00000010 |
| #define ADI_3_REFSYS_DCDCCTL2_BIAS_DIS_S 4 |
| |
| // Field: [3:0] TESTSEL |
| // |
| // Select signal for test bus, one hot. |
| // ENUMs: |
| // VDDROK VDDR_OK connected to test bus. |
| // IB1U 1uA bias current connected to test bus. |
| // PASSGATE Pass transistor gate voltage connected to test |
| // bus. |
| // ERRAMP_OUT Error amp output voltage connected to test bus. |
| // NC No signal connected to test bus. |
| #define ADI_3_REFSYS_DCDCCTL2_TESTSEL_W 4 |
| #define ADI_3_REFSYS_DCDCCTL2_TESTSEL_M 0x0000000F |
| #define ADI_3_REFSYS_DCDCCTL2_TESTSEL_S 0 |
| #define ADI_3_REFSYS_DCDCCTL2_TESTSEL_VDDROK 0x00000008 |
| #define ADI_3_REFSYS_DCDCCTL2_TESTSEL_IB1U 0x00000004 |
| #define ADI_3_REFSYS_DCDCCTL2_TESTSEL_PASSGATE 0x00000002 |
| #define ADI_3_REFSYS_DCDCCTL2_TESTSEL_ERRAMP_OUT 0x00000001 |
| #define ADI_3_REFSYS_DCDCCTL2_TESTSEL_NC 0x00000000 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_DCDCCTL3 |
| // |
| //***************************************************************************** |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_DCDCCTL4 |
| // |
| //***************************************************************************** |
| // Field: [7:6] DEADTIME_TRIM |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_DCDCCTL4_DEADTIME_TRIM_W 2 |
| #define ADI_3_REFSYS_DCDCCTL4_DEADTIME_TRIM_M 0x000000C0 |
| #define ADI_3_REFSYS_DCDCCTL4_DEADTIME_TRIM_S 6 |
| |
| // Field: [5:3] LOW_EN_SEL |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_DCDCCTL4_LOW_EN_SEL_W 3 |
| #define ADI_3_REFSYS_DCDCCTL4_LOW_EN_SEL_M 0x00000038 |
| #define ADI_3_REFSYS_DCDCCTL4_LOW_EN_SEL_S 3 |
| |
| // Field: [2:0] HIGH_EN_SEL |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_DCDCCTL4_HIGH_EN_SEL_W 3 |
| #define ADI_3_REFSYS_DCDCCTL4_HIGH_EN_SEL_M 0x00000007 |
| #define ADI_3_REFSYS_DCDCCTL4_HIGH_EN_SEL_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: ADI_3_REFSYS_O_DCDCCTL5 |
| // |
| //***************************************************************************** |
| // Field: [5] TESTN |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_DCDCCTL5_TESTN 0x00000020 |
| #define ADI_3_REFSYS_DCDCCTL5_TESTN_M 0x00000020 |
| #define ADI_3_REFSYS_DCDCCTL5_TESTN_S 5 |
| |
| // Field: [4] TESTP |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_DCDCCTL5_TESTP 0x00000010 |
| #define ADI_3_REFSYS_DCDCCTL5_TESTP_M 0x00000010 |
| #define ADI_3_REFSYS_DCDCCTL5_TESTP_S 4 |
| |
| // Field: [3] DITHER_EN |
| // |
| // Internal. Only to be used through TI provided API. |
| // ENUMs: |
| // EN Internal. Only to be used through TI provided API. |
| // DIS Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_DCDCCTL5_DITHER_EN 0x00000008 |
| #define ADI_3_REFSYS_DCDCCTL5_DITHER_EN_M 0x00000008 |
| #define ADI_3_REFSYS_DCDCCTL5_DITHER_EN_S 3 |
| #define ADI_3_REFSYS_DCDCCTL5_DITHER_EN_EN 0x00000008 |
| #define ADI_3_REFSYS_DCDCCTL5_DITHER_EN_DIS 0x00000000 |
| |
| // Field: [2:0] IPEAK |
| // |
| // Internal. Only to be used through TI provided API. |
| #define ADI_3_REFSYS_DCDCCTL5_IPEAK_W 3 |
| #define ADI_3_REFSYS_DCDCCTL5_IPEAK_M 0x00000007 |
| #define ADI_3_REFSYS_DCDCCTL5_IPEAK_S 0 |
| |
| |
| #endif // __ADI_3_REFSYS__ |
