| /****************************************************************************** |
| * Filename: pwr_ctrl.h |
| * Revised: 2016-04-05 15:29:01 +0200 (Tue, 05 Apr 2016) |
| * Revision: 45999 |
| * |
| * Description: Defines and prototypes for the System Power Control. |
| * |
| * Copyright (c) 2015 - 2016, Texas Instruments Incorporated |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1) Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2) Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3) Neither the name of the ORGANIZATION nor the names of its contributors may |
| * be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ******************************************************************************/ |
| |
| //***************************************************************************** |
| // |
| //! \addtogroup system_control_group |
| //! @{ |
| //! \addtogroup pwrctrl_api |
| //! @{ |
| // |
| //***************************************************************************** |
| |
| #ifndef __PWR_CTRL_H__ |
| #define __PWR_CTRL_H__ |
| |
| //***************************************************************************** |
| // |
| // If building with a C++ compiler, make all of the definitions in this header |
| // have a C binding. |
| // |
| //***************************************************************************** |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| #include <stdbool.h> |
| #include <stdint.h> |
| #include <inc/hw_types.h> |
| #include <inc/hw_memmap.h> |
| #include <inc/hw_ints.h> |
| #include <inc/hw_aon_wuc.h> |
| #include <inc/hw_aon_sysctl.h> |
| #include <inc/hw_aon_rtc.h> |
| #include <inc/hw_adi_2_refsys.h> |
| #include <driverlib/debug.h> |
| #include <driverlib/interrupt.h> |
| #include <driverlib/osc.h> |
| #include <driverlib/cpu.h> |
| #include <driverlib/prcm.h> |
| #include <driverlib/aon_ioc.h> |
| #include <driverlib/adi.h> |
| |
| //***************************************************************************** |
| // |
| // Support for DriverLib in ROM: |
| // This section renames all functions that are not "static inline", so that |
| // calling these functions will default to implementation in flash. At the end |
| // of this file a second renaming will change the defaults to implementation in |
| // ROM for available functions. |
| // |
| // To force use of the implementation in flash, e.g. for debugging: |
| // - Globally: Define DRIVERLIB_NOROM at project level |
| // - Per function: Use prefix "NOROM_" when calling the function |
| // |
| //***************************************************************************** |
| #if !defined(DOXYGEN) |
| #define PowerCtrlSourceSet NOROM_PowerCtrlSourceSet |
| #endif |
| |
| //***************************************************************************** |
| // |
| // Defines for the system power states |
| // |
| //***************************************************************************** |
| #define PWRCTRL_ACTIVE 0x00000001 |
| #define PWRCTRL_STANDBY 0x00000002 |
| #define PWRCTRL_POWER_DOWN 0x00000004 |
| #define PWRCTRL_SHUTDOWN 0x00000008 |
| |
| //***************************************************************************** |
| // |
| // Defines for the power configuration in the AON System Control 1.2 V |
| // |
| //***************************************************************************** |
| #define PWRCTRL_IOSEG3_ENABLE 0x00000800 |
| #define PWRCTRL_IOSEG2_ENABLE 0x00000400 |
| #define PWRCTRL_IOSEG3_DISABLE 0x00000200 |
| #define PWRCTRL_IOSEG2_DISABLE 0x00000100 |
| #define PWRCTRL_PWRSRC_DCDC 0x00000001 |
| #define PWRCTRL_PWRSRC_GLDO 0x00000000 |
| #define PWRCTRL_PWRSRC_ULDO 0x00000002 |
| |
| //***************************************************************************** |
| // |
| // The following are defines for the various reset source for the device. |
| // |
| //***************************************************************************** |
| #define PWRCTRL_RST_POWER_ON 0x00000000 // Reset by power on |
| #define PWRCTRL_RST_PIN 0x00000001 // Pin reset |
| #define PWRCTRL_RST_VDDS_BOD 0x00000002 // VDDS Brown Out Detect |
| #define PWRCTRL_RST_VDD_BOD 0x00000003 // VDD Brown Out Detect |
| #define PWRCTRL_RST_VDDR_BOD 0x00000004 // VDDR Brown Out Detect |
| #define PWRCTRL_RST_CLK_LOSS 0x00000005 // Clock loss Reset |
| #define PWRCTRL_RST_SW_PIN 0x00000006 // SYSRESET or pin reset |
| #define PWRCTRL_RST_WARM 0x00000007 // Reset via PRCM warm reset request |
| |
| //***************************************************************************** |
| // |
| // API Functions and prototypes |
| // |
| //***************************************************************************** |
| |
| //***************************************************************************** |
| // |
| //! \brief Set (Request) the main power source. |
| //! |
| //! \note The system will never allow a switch to the \ref PWRCTRL_PWRSRC_ULDO |
| //! when in active mode. This is only allowed when the system is in lower power |
| //! mode where no code is executing and no peripherals are active. |
| //! Assuming that there is an external capacitor available for the |
| //! \ref PWRCTRL_PWRSRC_DCDC the system can dynamically switch back and forth |
| //! between the two when in active mode. |
| //! |
| //! \note The system will automatically switch to the GLDO / DCDC when waking |
| //! up from a low power mode. |
| //! |
| //! \param ui32PowerConfig is a bitmask indicating the target power source. |
| //! - \ref PWRCTRL_PWRSRC_DCDC |
| //! - \ref PWRCTRL_PWRSRC_GLDO |
| //! - \ref PWRCTRL_PWRSRC_ULDO |
| //! |
| //! \return None |
| // |
| //***************************************************************************** |
| extern void PowerCtrlSourceSet(uint32_t ui32PowerConfig); |
| |
| //***************************************************************************** |
| // |
| //! \brief Get the main power source. |
| //! |
| //! Use this function to retrieve the current active power source. |
| //! |
| //! When the System CPU is active it can never be powered by uLDO as this |
| //! is too weak a power source. |
| //! |
| //! \note Using the DCDC power supply requires an external inductor. |
| //! |
| //! \return Returns the main power source. |
| //! - \ref PWRCTRL_PWRSRC_DCDC |
| //! - \ref PWRCTRL_PWRSRC_GLDO |
| // |
| //***************************************************************************** |
| __STATIC_INLINE uint32_t |
| PowerCtrlSourceGet(void) |
| { |
| uint32_t ui32PowerConfig; |
| |
| // |
| // Return the current power source |
| // |
| ui32PowerConfig = HWREG(AON_SYSCTL_BASE + AON_SYSCTL_O_PWRCTL); |
| if(ui32PowerConfig & AON_SYSCTL_PWRCTL_DCDC_ACTIVE) |
| { |
| return (PWRCTRL_PWRSRC_DCDC); |
| } |
| else |
| { |
| return (PWRCTRL_PWRSRC_GLDO); |
| } |
| } |
| |
| //***************************************************************************** |
| // |
| //! \brief OBSOLETE: Get the last known reset source of the system. |
| //! |
| //! Recommend using function \ref SysCtrlResetSourceGet() instead of this one. |
| //! This function returns reset source but does not cover if waking up from shutdown. |
| //! This function can be seen as a subset of function \ref SysCtrlResetSourceGet() |
| //! and will be removed in a future release. |
| //! |
| //! \return Returns one of the known reset values. |
| //! The possible reset sources are: |
| //! - \ref PWRCTRL_RST_POWER_ON |
| //! - \ref PWRCTRL_RST_PIN |
| //! - \ref PWRCTRL_RST_VDDS_BOD |
| //! - \ref PWRCTRL_RST_VDD_BOD |
| //! - \ref PWRCTRL_RST_VDDR_BOD |
| //! - \ref PWRCTRL_RST_CLK_LOSS |
| //! - \ref PWRCTRL_RST_SW_PIN |
| //! - \ref PWRCTRL_RST_WARM |
| //! |
| //! \sa \ref SysCtrlResetSourceGet() |
| // |
| //***************************************************************************** |
| __STATIC_INLINE uint32_t |
| PowerCtrlResetSourceGet(void) |
| { |
| // |
| // Get the reset source. |
| // |
| return (( HWREG( AON_SYSCTL_BASE + AON_SYSCTL_O_RESETCTL ) & |
| AON_SYSCTL_RESETCTL_RESET_SRC_M ) >> |
| AON_SYSCTL_RESETCTL_RESET_SRC_S ) ; |
| } |
| |
| //***************************************************************************** |
| // |
| //! \brief Close the latches in the AON IOC interface and in padring. |
| //! |
| //! Use this function to unfreeze the current value retained on the IOs driven |
| //! by the device. This is required if it is desired to maintain the level of |
| //! any IO driven when going through a shutdown/powerdown cycle. |
| //! |
| //! \return None |
| //! |
| //! \sa \ref PowerCtrlIOFreezeDisable() |
| // |
| //***************************************************************************** |
| __STATIC_INLINE void |
| PowerCtrlIOFreezeEnable(void) |
| { |
| // |
| // Close the IO latches at AON_IOC level and in the padring. |
| // |
| AONIOCFreezeEnable(); |
| HWREG(AON_SYSCTL_BASE + AON_SYSCTL_O_SLEEPCTL) = 0; |
| HWREG(AON_RTC_BASE + AON_RTC_O_SYNC); |
| } |
| |
| //***************************************************************************** |
| // |
| //! Open the latches in the AON IOC interface and in padring. |
| //! |
| //! Use this function to unfreeze the latches that retained on the IOs driven |
| //! by the device. This function should not be called before the application |
| //! has reinitialized the IO configuration that will drive the IOs to the |
| //! desired level. |
| //! |
| //! \return None |
| //! |
| //! \sa \ref PowerCtrlIOFreezeEnable() |
| // |
| //***************************************************************************** |
| __STATIC_INLINE void |
| PowerCtrlIOFreezeDisable(void) |
| { |
| // |
| // Open the IO latches at AON_IOC level and in the padring |
| // |
| AONIOCFreezeDisable(); |
| HWREG(AON_SYSCTL_BASE + AON_SYSCTL_O_SLEEPCTL) = 1; |
| HWREG(AON_RTC_BASE + AON_RTC_O_SYNC); |
| } |
| |
| //***************************************************************************** |
| // |
| // Support for DriverLib in ROM: |
| // Redirect to implementation in ROM when available. |
| // |
| //***************************************************************************** |
| #if !defined(DRIVERLIB_NOROM) && !defined(DOXYGEN) |
| #include <driverlib/rom.h> |
| #ifdef ROM_PowerCtrlSourceSet |
| #undef PowerCtrlSourceSet |
| #define PowerCtrlSourceSet ROM_PowerCtrlSourceSet |
| #endif |
| #endif |
| |
| //***************************************************************************** |
| // |
| // Mark the end of the C bindings section for C++ compilers. |
| // |
| //***************************************************************************** |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // __PWR_CTRL_H__ |
| |
| //***************************************************************************** |
| // |
| //! Close the Doxygen group. |
| //! @} |
| //! @} |
| // |
| //***************************************************************************** |