blob: 6fe27430cb83e36afb69a78efd0ac9e3e975deb8 [file] [log] [blame]
/******************************************************************************
* Filename: rfc.h
* Revised: 2016-05-02 14:44:23 +0200 (Mon, 02 May 2016)
* Revision: 46231
*
* Description: Defines and prototypes for the RF Core.
*
* Copyright (c) 2015 - 2016, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2) Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3) Neither the name of the ORGANIZATION nor the names of its contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
//*****************************************************************************
//
//! \addtogroup rfc_api
//! @{
//
//*****************************************************************************
#ifndef __RFC_H__
#define __RFC_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
#include <stdbool.h>
#include <stdint.h>
#include <inc/hw_types.h>
#include <inc/hw_memmap.h>
#include <inc/hw_rfc_pwr.h>
#include <inc/hw_rfc_dbell.h>
#include <driverlib/rf_common_cmd.h>
#include <driverlib/rf_prop_cmd.h>
#include <inc/hw_fcfg1.h>
#include <inc/hw_adi_3_refsys.h>
#include <inc/hw_adi.h>
typedef struct {
uint32_t configIfAdc;
uint32_t configRfFrontend;
uint32_t configSynth;
uint32_t configMiscAdc;
} rfTrim_t;
//*****************************************************************************
//
// Support for DriverLib in ROM:
// This section renames all functions that are not "static inline", so that
// calling these functions will default to implementation in flash. At the end
// of this file a second renaming will change the defaults to implementation in
// ROM for available functions.
//
// To force use of the implementation in flash, e.g. for debugging:
// - Globally: Define DRIVERLIB_NOROM at project level
// - Per function: Use prefix "NOROM_" when calling the function
//
//*****************************************************************************
#if !defined(DOXYGEN)
#define RFCCpeIntGetAndClear NOROM_RFCCpeIntGetAndClear
#define RFCDoorbellSendTo NOROM_RFCDoorbellSendTo
#define RFCSynthPowerDown NOROM_RFCSynthPowerDown
#define RFCRfTrimRead NOROM_RFCRfTrimRead
#define RFCRfTrimSet NOROM_RFCRfTrimSet
#define RFCRTrim NOROM_RFCRTrim
#define RFCCPEPatchReset NOROM_RFCCPEPatchReset
#define RFCAdi3VcoLdoVoltageMode NOROM_RFCAdi3VcoLdoVoltageMode
#endif
//*****************************************************************************
//
// API Functions and prototypes
//
//*****************************************************************************
//*****************************************************************************
//
//! \brief Enable the RF core clocks.
//!
//! As soon as the RF core is started it will handle clock control
//! autonomously. No check should be performed to check the clocks. Instead
//! the radio can be ping'ed through the command interface.
//!
//! \return None
//
//*****************************************************************************
__STATIC_INLINE void
RFCClockEnable(void)
{
//
// Enable all clocks
//
HWREG(RFC_PWR_NONBUF_BASE + RFC_PWR_O_PWMCLKEN) =
RFC_PWR_PWMCLKEN_RFCTRC |
RFC_PWR_PWMCLKEN_FSCA |
RFC_PWR_PWMCLKEN_PHA |
RFC_PWR_PWMCLKEN_RAT |
RFC_PWR_PWMCLKEN_RFERAM |
RFC_PWR_PWMCLKEN_RFE |
RFC_PWR_PWMCLKEN_MDMRAM |
RFC_PWR_PWMCLKEN_MDM |
RFC_PWR_PWMCLKEN_CPERAM |
RFC_PWR_PWMCLKEN_CPE |
RFC_PWR_PWMCLKEN_RFC;
}
//*****************************************************************************
//
//! \brief Disable the RF core clocks.
//!
//! As soon as the RF core is started it will handle clock control
//! autonomously. No check should be performed to check the clocks. Instead
//! the radio can be ping'ed through the command interface.
//!
//! When disabling clocks it is the programmers responsibility that the
//! RF core clocks can be safely gated. I.e. the RF core should be safely
//! 'parked'.
//!
//! \return None
//
//*****************************************************************************
__STATIC_INLINE void
RFCClockDisable(void)
{
//
// Disable all clocks
//
HWREG(RFC_PWR_NONBUF_BASE + RFC_PWR_O_PWMCLKEN) = 0x0;
}
//*****************************************************************************
//
//! Enable CPE0 interrupt
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpe0IntEnable(uint32_t ui32Mask)
{
//
// Multiplex RF Core interrupts to CPE0 IRQ.
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEISL) &= ~ui32Mask;
do
{
//
// Clear any pending interrupts.
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
}while(HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIFG) != 0x0);
//
// Enable the masked interrupts
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIEN) |= ui32Mask;
}
//*****************************************************************************
//
//! Enable CPE1 interrupt
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpe1IntEnable(uint32_t ui32Mask)
{
//
// Multiplex RF Core interrupts to CPE1 IRQ.
//
HWREG( RFC_DBELL_BASE + RFC_DBELL_O_RFCPEISL) |= ui32Mask;
do
{
//
// Clear any pending interrupts.
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIFG) = 0x0;
}while(HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIFG) != 0x0);
//
// Enable the masked interrupts
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIEN) |= ui32Mask;
}
//*****************************************************************************
//
//! This function is used to map only HW interrupts, and
//! clears/unmasks them. These interrupts are then enabled.
//
//*****************************************************************************
__STATIC_INLINE void
RFCHwIntEnable(uint32_t ui32Mask)
{
//
// Clear any pending interrupts.
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFHWIFG) = 0x0;
//
// Enable the masked interrupts
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFHWIEN) |= ui32Mask;
}
//*****************************************************************************
//
//! Disable CPE interrupt
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpeIntDisable(uint32_t ui32Mask)
{
//
// Disable the masked interrupts
//
HWREG( RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIEN ) &= ~ui32Mask;
}
//*****************************************************************************
//
//! Disable HW interrupt
//
//*****************************************************************************
__STATIC_INLINE void
RFCHwIntDisable(uint32_t ui32Mask)
{
//
// Disable the masked interrupts
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFHWIEN) &= ~ui32Mask;
}
//*****************************************************************************
//
//! Get and clear CPE interrupt flags
//
//*****************************************************************************
extern uint32_t RFCCpeIntGetAndClear(void);
//*****************************************************************************
//
//! Clear interrupt flags
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpeIntClear(uint32_t ui32Mask)
{
do
{
//
// Clear interrupts that may now be pending
//
HWREG(RFC_DBELL_BASE+RFC_DBELL_O_RFCPEIFG) = ~ui32Mask;
}while (HWREG(RFC_DBELL_BASE+RFC_DBELL_O_RFCPEIFG) & ui32Mask);
}
//*****************************************************************************
//
//! Clear interrupt flags
//
//*****************************************************************************
__STATIC_INLINE void
RFCHwIntClear(uint32_t ui32Mask)
{
//
// Clear pending interrupts.
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFHWIFG) = ~ui32Mask;
}
//*****************************************************************************
//
//! Clear interrupt flags
//
//*****************************************************************************
__STATIC_INLINE void
RFCAckIntClear(void)
{
//
// Clear any pending interrupts.
//
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFACKIFG) = 0x0;
}
//*****************************************************************************
//
//! Send command to doorbell and wait for ack
//
//*****************************************************************************
extern uint32_t RFCDoorbellSendTo(uint32_t pOp);
//*****************************************************************************
//
//! Turn off synth, NOTE: Radio will no longer respond to commands!
//
//*****************************************************************************
extern void RFCSynthPowerDown(void);
//*****************************************************************************
//
//! Read RF trim from flash using CM3
//
//*****************************************************************************
extern void RFCRfTrimRead(rfc_radioOp_t *pOpSetup, rfTrim_t* rfTrim);
//*****************************************************************************
//
//! Write preloaded RF trim values to CM0
//
//*****************************************************************************
extern void RFCRfTrimSet(rfTrim_t* rfTrim);
//*****************************************************************************
//
//! Check Override RTrim vs FCFG RTrim
//
//*****************************************************************************
extern void RFCRTrim(rfc_radioOp_t *pOpSetup);
//*****************************************************************************
//
//! Reset previously patched CPE RAM to a state where it can be patched again
//
//*****************************************************************************
extern void RFCCPEPatchReset(void);
//*****************************************************************************
//
//! Function to set VCOLDO reference to voltage mode
//
//*****************************************************************************
extern void RFCAdi3VcoLdoVoltageMode(bool bEnable);
//*****************************************************************************
//
// Support for DriverLib in ROM:
// Redirect to implementation in ROM when available.
//
//*****************************************************************************
#if !defined(DRIVERLIB_NOROM) && !defined(DOXYGEN)
#include <driverlib/rom.h>
#ifdef ROM_RFCCpeIntGetAndClear
#undef RFCCpeIntGetAndClear
#define RFCCpeIntGetAndClear ROM_RFCCpeIntGetAndClear
#endif
#ifdef ROM_RFCDoorbellSendTo
#undef RFCDoorbellSendTo
#define RFCDoorbellSendTo ROM_RFCDoorbellSendTo
#endif
#ifdef ROM_RFCSynthPowerDown
#undef RFCSynthPowerDown
#define RFCSynthPowerDown ROM_RFCSynthPowerDown
#endif
#ifdef ROM_RFCRfTrimRead
#undef RFCRfTrimRead
#define RFCRfTrimRead ROM_RFCRfTrimRead
#endif
#ifdef ROM_RFCRfTrimSet
#undef RFCRfTrimSet
#define RFCRfTrimSet ROM_RFCRfTrimSet
#endif
#ifdef ROM_RFCRTrim
#undef RFCRTrim
#define RFCRTrim ROM_RFCRTrim
#endif
#ifdef ROM_RFCCPEPatchReset
#undef RFCCPEPatchReset
#define RFCCPEPatchReset ROM_RFCCPEPatchReset
#endif
#ifdef ROM_RFCAdi3VcoLdoVoltageMode
#undef RFCAdi3VcoLdoVoltageMode
#define RFCAdi3VcoLdoVoltageMode ROM_RFCAdi3VcoLdoVoltageMode
#endif
#endif
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __RFC_H__
//*****************************************************************************
//
//! Close the Doxygen group.
//! @}
//
//*****************************************************************************