| /****************************************************************************** |
| * Filename: hw_aon_batmon_h |
| * Revised: 2016-03-14 09:20:59 +0100 (Mon, 14 Mar 2016) |
| * Revision: 45924 |
| * |
| * Copyright (c) 2015 - 2016, Texas Instruments Incorporated |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1) Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * 2) Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * 3) Neither the name of the ORGANIZATION nor the names of its contributors may |
| * be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ******************************************************************************/ |
| |
| #ifndef __HW_AON_BATMON_H__ |
| #define __HW_AON_BATMON_H__ |
| |
| //***************************************************************************** |
| // |
| // This section defines the register offsets of |
| // AON_BATMON component |
| // |
| //***************************************************************************** |
| // Internal |
| #define AON_BATMON_O_CTL 0x00000000 |
| |
| // Internal |
| #define AON_BATMON_O_MEASCFG 0x00000004 |
| |
| // Internal |
| #define AON_BATMON_O_TEMPP0 0x0000000C |
| |
| // Internal |
| #define AON_BATMON_O_TEMPP1 0x00000010 |
| |
| // Internal |
| #define AON_BATMON_O_TEMPP2 0x00000014 |
| |
| // Internal |
| #define AON_BATMON_O_BATMONP0 0x00000018 |
| |
| // Internal |
| #define AON_BATMON_O_BATMONP1 0x0000001C |
| |
| // Internal |
| #define AON_BATMON_O_IOSTRP0 0x00000020 |
| |
| // Internal |
| #define AON_BATMON_O_FLASHPUMPP0 0x00000024 |
| |
| // Last Measured Battery Voltage |
| #define AON_BATMON_O_BAT 0x00000028 |
| |
| // Battery Update |
| #define AON_BATMON_O_BATUPD 0x0000002C |
| |
| // Temperature |
| #define AON_BATMON_O_TEMP 0x00000030 |
| |
| // Temperature Update |
| #define AON_BATMON_O_TEMPUPD 0x00000034 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_CTL |
| // |
| //***************************************************************************** |
| // Field: [1] CALC_EN |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_CTL_CALC_EN 0x00000002 |
| #define AON_BATMON_CTL_CALC_EN_BITN 1 |
| #define AON_BATMON_CTL_CALC_EN_M 0x00000002 |
| #define AON_BATMON_CTL_CALC_EN_S 1 |
| |
| // Field: [0] MEAS_EN |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_CTL_MEAS_EN 0x00000001 |
| #define AON_BATMON_CTL_MEAS_EN_BITN 0 |
| #define AON_BATMON_CTL_MEAS_EN_M 0x00000001 |
| #define AON_BATMON_CTL_MEAS_EN_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_MEASCFG |
| // |
| //***************************************************************************** |
| // Field: [1:0] PER |
| // |
| // Internal. Only to be used through TI provided API. |
| // ENUMs: |
| // 32CYC Internal. Only to be used through TI provided API. |
| // 16CYC Internal. Only to be used through TI provided API. |
| // 8CYC Internal. Only to be used through TI provided API. |
| // CONT Internal. Only to be used through TI provided API. |
| #define AON_BATMON_MEASCFG_PER_W 2 |
| #define AON_BATMON_MEASCFG_PER_M 0x00000003 |
| #define AON_BATMON_MEASCFG_PER_S 0 |
| #define AON_BATMON_MEASCFG_PER_32CYC 0x00000003 |
| #define AON_BATMON_MEASCFG_PER_16CYC 0x00000002 |
| #define AON_BATMON_MEASCFG_PER_8CYC 0x00000001 |
| #define AON_BATMON_MEASCFG_PER_CONT 0x00000000 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_TEMPP0 |
| // |
| //***************************************************************************** |
| // Field: [7:0] CFG |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_TEMPP0_CFG_W 8 |
| #define AON_BATMON_TEMPP0_CFG_M 0x000000FF |
| #define AON_BATMON_TEMPP0_CFG_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_TEMPP1 |
| // |
| //***************************************************************************** |
| // Field: [5:0] CFG |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_TEMPP1_CFG_W 6 |
| #define AON_BATMON_TEMPP1_CFG_M 0x0000003F |
| #define AON_BATMON_TEMPP1_CFG_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_TEMPP2 |
| // |
| //***************************************************************************** |
| // Field: [4:0] CFG |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_TEMPP2_CFG_W 5 |
| #define AON_BATMON_TEMPP2_CFG_M 0x0000001F |
| #define AON_BATMON_TEMPP2_CFG_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_BATMONP0 |
| // |
| //***************************************************************************** |
| // Field: [5:0] CFG |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_BATMONP0_CFG_W 6 |
| #define AON_BATMON_BATMONP0_CFG_M 0x0000003F |
| #define AON_BATMON_BATMONP0_CFG_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_BATMONP1 |
| // |
| //***************************************************************************** |
| // Field: [5:0] CFG |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_BATMONP1_CFG_W 6 |
| #define AON_BATMON_BATMONP1_CFG_M 0x0000003F |
| #define AON_BATMON_BATMONP1_CFG_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_IOSTRP0 |
| // |
| //***************************************************************************** |
| // Field: [5:4] CFG2 |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_IOSTRP0_CFG2_W 2 |
| #define AON_BATMON_IOSTRP0_CFG2_M 0x00000030 |
| #define AON_BATMON_IOSTRP0_CFG2_S 4 |
| |
| // Field: [3:0] CFG1 |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_IOSTRP0_CFG1_W 4 |
| #define AON_BATMON_IOSTRP0_CFG1_M 0x0000000F |
| #define AON_BATMON_IOSTRP0_CFG1_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_FLASHPUMPP0 |
| // |
| //***************************************************************************** |
| // Field: [8] FALLB |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_FLASHPUMPP0_FALLB 0x00000100 |
| #define AON_BATMON_FLASHPUMPP0_FALLB_BITN 8 |
| #define AON_BATMON_FLASHPUMPP0_FALLB_M 0x00000100 |
| #define AON_BATMON_FLASHPUMPP0_FALLB_S 8 |
| |
| // Field: [7:6] HIGHLIM |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_FLASHPUMPP0_HIGHLIM_W 2 |
| #define AON_BATMON_FLASHPUMPP0_HIGHLIM_M 0x000000C0 |
| #define AON_BATMON_FLASHPUMPP0_HIGHLIM_S 6 |
| |
| // Field: [5] LOWLIM |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_FLASHPUMPP0_LOWLIM 0x00000020 |
| #define AON_BATMON_FLASHPUMPP0_LOWLIM_BITN 5 |
| #define AON_BATMON_FLASHPUMPP0_LOWLIM_M 0x00000020 |
| #define AON_BATMON_FLASHPUMPP0_LOWLIM_S 5 |
| |
| // Field: [4] OVR |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_FLASHPUMPP0_OVR 0x00000010 |
| #define AON_BATMON_FLASHPUMPP0_OVR_BITN 4 |
| #define AON_BATMON_FLASHPUMPP0_OVR_M 0x00000010 |
| #define AON_BATMON_FLASHPUMPP0_OVR_S 4 |
| |
| // Field: [3:0] CFG |
| // |
| // Internal. Only to be used through TI provided API. |
| #define AON_BATMON_FLASHPUMPP0_CFG_W 4 |
| #define AON_BATMON_FLASHPUMPP0_CFG_M 0x0000000F |
| #define AON_BATMON_FLASHPUMPP0_CFG_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_BAT |
| // |
| //***************************************************************************** |
| // Field: [10:8] INT |
| // |
| // Integer part: |
| // |
| // 0x0: 0V + fractional part |
| // ... |
| // 0x3: 3V + fractional part |
| // 0x4: 4V + fractional part |
| #define AON_BATMON_BAT_INT_W 3 |
| #define AON_BATMON_BAT_INT_M 0x00000700 |
| #define AON_BATMON_BAT_INT_S 8 |
| |
| // Field: [7:0] FRAC |
| // |
| // Fractional part, standard binary fractional encoding. |
| // |
| // 0x00: .0V |
| // ... |
| // 0x20: 1/8 = .125V |
| // 0x40: 1/4 = .25V |
| // 0x80: 1/2 = .5V |
| // ... |
| // 0xA0: 1/2 + 1/8 = .625V |
| // ... |
| // 0xFF: Max |
| #define AON_BATMON_BAT_FRAC_W 8 |
| #define AON_BATMON_BAT_FRAC_M 0x000000FF |
| #define AON_BATMON_BAT_FRAC_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_BATUPD |
| // |
| //***************************************************************************** |
| // Field: [0] STAT |
| // |
| // |
| // 0: No update since last clear |
| // 1: New battery voltage is present. |
| // |
| // Write 1 to clear the status. |
| #define AON_BATMON_BATUPD_STAT 0x00000001 |
| #define AON_BATMON_BATUPD_STAT_BITN 0 |
| #define AON_BATMON_BATUPD_STAT_M 0x00000001 |
| #define AON_BATMON_BATUPD_STAT_S 0 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_TEMP |
| // |
| //***************************************************************************** |
| // Field: [16:8] INT |
| // |
| // Integer part (signed) of temperature value. |
| // Total value = INTEGER + FRACTIONAL |
| // 2's complement encoding |
| // |
| // 0x100: Min value |
| // 0x1D8: -40C |
| // 0x1FF: -1C |
| // 0x00: 0C |
| // 0x1B: 27C |
| // 0x55: 85C |
| // 0xFF: Max value |
| #define AON_BATMON_TEMP_INT_W 9 |
| #define AON_BATMON_TEMP_INT_M 0x0001FF00 |
| #define AON_BATMON_TEMP_INT_S 8 |
| |
| //***************************************************************************** |
| // |
| // Register: AON_BATMON_O_TEMPUPD |
| // |
| //***************************************************************************** |
| // Field: [0] STAT |
| // |
| // |
| // 0: No update since last clear |
| // 1: New temperature is present. |
| // |
| // Write 1 to clear the status. |
| #define AON_BATMON_TEMPUPD_STAT 0x00000001 |
| #define AON_BATMON_TEMPUPD_STAT_BITN 0 |
| #define AON_BATMON_TEMPUPD_STAT_M 0x00000001 |
| #define AON_BATMON_TEMPUPD_STAT_S 0 |
| |
| |
| #endif // __AON_BATMON__ |
