u-boot-imx/board/BuS/eb_cpux9k2/cpux9k2.c - nest-guard/1.0/u-boot - Git at Google

 /*
  * (C) Copyright 2008-2009
  * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
  * Jens Scharsig <esw@bus-elektronik.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <exports.h>
 #include <net.h>
 #include <netdev.h>
 #include <nand.h>

 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_pio.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_mc.h>
 #include <asm/arch/at91_common.h>

 #ifdef CONFIG_STATUS_LED
 #include <status_led.h>
 #endif

 #ifdef CONFIG_VIDEO
 #include <bus_vcxk.h>

 extern unsigned long display_width;
 extern unsigned long display_height;
 #endif

 #ifdef CONFIG_CMD_NAND
 void cpux9k2_nand_hw_init(void);
 #endif

 DECLARE_GLOBAL_DATA_PTR;

 /*
  * Miscelaneous platform dependent initialisations
  */

 int board_init(void)
 {
 	at91_pio_t *pio	= (at91_pio_t *) ATMEL_BASE_PIO;

 	/* Correct IRDA resistor problem / Set PA23_TXD in Output */
 	writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);

 	gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

 #ifdef CONFIG_STATUS_LED
 	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
 #endif
 #ifdef CONFIG_CMD_NAND
 	cpux9k2_nand_hw_init();
 #endif
 	return 0;
 }

 int board_early_init_f(void)
 {
 	at91_seriald_hw_init();
 	return 0;
 }

 #ifdef CONFIG_MISC_INIT_R

 int misc_init_r(void)
 {
 	uchar	mac[8];
 	uchar	tm;
 	uchar	midx;
 	uchar	macn6, macn7;

 	if (getenv("ethaddr") == NULL) {
 		if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00,
 				CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 				(uchar *) &mac, sizeof(mac)) != 0) {
 			puts("Error reading MAC from EEPROM\n");
 		} else {
 			tm = 0;
 			macn6 = 0;
 			macn7 = 0xFF;
 			for (midx = 0; midx < 6; midx++) {
 				if ((mac[midx] != 0) && (mac[midx] != 0xFF))
 					tm++;
 				macn6 += mac[midx];
 				macn7 ^= mac[midx];
 			}
 			if ((macn6 != mac[6]) || (macn7 != mac[7]))
 				tm = 0;
 			if (tm)
 				eth_setenv_enetaddr("ethaddr", mac);
 			 else
 				puts("Error: invalid MAC at EEPROM\n");
 		}
 	}
 	gd->jt->do_reset = do_reset;

 #ifdef CONFIG_STATUS_LED
 	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
 #endif
 	return 0;
 }
 #endif

 #ifdef CONFIG_RESET_PHY_R
 void reset_phy(void)
 {
 	udelay(10000);
 	eth_init(gd->bd);
 }
 #endif

 /*
  * DRAM initialisations
  */

 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
 			CONFIG_SYS_SDRAM_SIZE);
 	return 0;
 }

 /*
  * Ethernet initialisations
  */

 #ifdef CONFIG_DRIVER_AT91EMAC
 int board_eth_init(bd_t *bis)
 {
 	int rc = 0;
 	rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
 	return rc;
 }
 #endif

 /*
  * Disk On Chip (NAND) Millenium initialization.
  * The NAND lives in the CS2* space
  */
 #if defined(CONFIG_CMD_NAND)

 #define	MASK_ALE	(1 << 22)	/* our ALE is AD22 */
 #define	MASK_CLE	(1 << 21)	/* our CLE is AD21 */

 void cpux9k2_nand_hw_init(void)
 {
 	unsigned long csr;
 	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
 	at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;

 	/* Setup Smart Media, fitst enable the address range of CS3 */
 	writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa);

 	/* RWH = 1 | RWS = 0 | TDF = 1 | NWS = 3 */
 	csr =	AT91_SMC_CSR_RWHOLD(1) | AT91_SMC_CSR_TDF(1) |
 		AT91_SMC_CSR_NWS(3) |
 		AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_8 |
 		AT91_SMC_CSR_WSEN;
 	writel(csr, &mc->smc.csr[3]);

 	writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
 	writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE,
 		&pio->pioc.pdr);

 	/* Configure PC2 as input (signal Nand READY ) */
 	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
 	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
 	writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);

 	/* PIOC clock enabling */
 	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
 }

 static void board_nand_hwcontrol(struct mtd_info *mtd,
 	int cmd, unsigned int ctrl)
 {
 	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 	struct nand_chip *this = mtd->priv;
 	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;

 	if (ctrl & NAND_CTRL_CHANGE) {
 		IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);

 		if (ctrl & NAND_CLE)
 			IO_ADDR_W |= MASK_CLE;
 		if (ctrl & NAND_ALE)
 			IO_ADDR_W |= MASK_ALE;

 		if ((ctrl & NAND_NCE))
 			writel(1, &pio->pioc.codr);
 		else
 			writel(1, &pio->pioc.sodr);

 		this->IO_ADDR_W = (void *) IO_ADDR_W;
 	}
 	if (cmd != NAND_CMD_NONE)
 		writeb(cmd, this->IO_ADDR_W);
 }

 static int board_nand_dev_ready(struct mtd_info *mtd)
 {
 	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 	return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
 }

 int board_nand_init(struct nand_chip *nand)
 {
 	cpux9k2_nand_hw_init();
 	nand->ecc.mode = NAND_ECC_SOFT;
 	nand->cmd_ctrl = board_nand_hwcontrol;
 	nand->dev_ready = board_nand_dev_ready;
 	nand->chip_delay = 20;
 	return 0;
 }

 #endif

 #if defined(CONFIG_VIDEO)
 /*
  * drv_video_init
  * FUNCTION: initialize VCxK device
  */

 int drv_video_init(void)
 {
 #ifdef CONFIG_SPLASH_SCREEN
 	unsigned long splash;
 #endif
 	char *s;
 	unsigned long csr;
 	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
 	at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;

 	printf("Init Video as ");
 	s = getenv("displaywidth");
 	if (s != NULL)
 		display_width = simple_strtoul(s, NULL, 10);
 	else
 		display_width = 256;
 	s = getenv("displayheight");
 	if (s != NULL)
 		display_height = simple_strtoul(s, NULL, 10);
 	else
 		display_height = 256;
 	printf("%ld x %ld pixel matrix\n", display_width, display_height);

 	/* RWH = 2 | RWS =2  | TDF = 4 | NWS = 0x6 */
 	csr =	AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) |
 		AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) |
 		AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
 		AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
 	writel(csr, &mc->smc.csr[2]);
 	writel(1 << ATMEL_ID_PIOB, &pmc->pcer);

 	vcxk_init(display_width, display_height);
 #ifdef CONFIG_SPLASH_SCREEN
 	s = getenv("splashimage");
 	if (s != NULL) {
 		splash = simple_strtoul(s, NULL, 16);
 		printf("use splashimage: %lx\n", splash);
 		video_display_bitmap(splash, 0, 0);
 	}
 #endif
 	return 0;
 }
 #endif

 #ifdef CONFIG_SYS_I2C_SOFT

 void i2c_init_board(void)
 {
 	u32 pin;
 	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
 	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;

 	writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
 	pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK;
 	writel(pin, &pio->pioa.idr);
 	writel(pin, &pio->pioa.pudr);
 	writel(pin, &pio->pioa.per);
 	writel(pin, &pio->pioa.oer);
 	writel(pin, &pio->pioa.sodr);
 }

 #endif

 /*--------------------------------------------------------------------------*/

 #ifdef CONFIG_STATUS_LED

 void __led_toggle(led_id_t mask)
 {
 	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;

 	if (readl(&pio->piod.odsr) & mask)
 		writel(mask, &pio->piod.codr);
 	else
 		writel(mask, &pio->piod.codr);
 }

 void __led_init(led_id_t mask, int state)
 {
 	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
 	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;

 	writel(1 << ATMEL_ID_PIOD, &pmc->pcer);	/* Enable PIOB clock */
 	/* Disable peripherals on LEDs */
 	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
 	/* Enable pins as outputs */
 	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.oer);
 	/* Turn all LEDs OFF */
 	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.sodr);

 	__led_set(mask, state);
 }

 void __led_set(led_id_t mask, int state)
 {
 	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
 	if (state == STATUS_LED_ON)
 		writel(mask, &pio->piod.codr);
 	else
 		writel(mask, &pio->piod.sodr);
 }

 #endif

 /*---------------------------------------------------------------------------*/

 int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int rcode = 0;
 	ulong side;
 	ulong bright;

 	switch (argc) {
 	case 3:
 		side = simple_strtoul(argv[1], NULL, 10);
 		bright = simple_strtoul(argv[2], NULL, 10);
 		if ((side >= 0) && (side <= 3) &&
 				(bright >= 0) && (bright <= 1000)) {
 			vcxk_setbrightness(side, bright);
 			rcode = 0;
 		} else {
 			printf("parameters out of range\n");
 			printf("Usage:\n%s\n", cmdtp->usage);
 			rcode = 1;
 		}
 		break;
 	default:
 		printf("Usage:\n%s\n", cmdtp->usage);
 		rcode = 1;
 		break;
 	}
 	return rcode;
 }

 /*---------------------------------------------------------------------------*/

 U_BOOT_CMD(
 	bright,	3,	0,	do_brightness,
 	"bright  - sets the display brightness\n",
 	" <side> <0..1000>\n        side: 0/3=both; 1=first; 2=second\n"
 );

 /* EOF cpu9k2.c */
	/*
	* (C) Copyright 2008-2009
	* BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
	* Jens Scharsig <esw@bus-elektronik.de>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <exports.h>
	#include <net.h>
	#include <netdev.h>
	#include <nand.h>

	#include <asm/io.h>
	#include <asm/arch/hardware.h>
	#include <asm/arch/at91_pio.h>
	#include <asm/arch/at91_pmc.h>
	#include <asm/arch/at91_mc.h>
	#include <asm/arch/at91_common.h>

	#ifdef CONFIG_STATUS_LED
	#include <status_led.h>
	#endif

	#ifdef CONFIG_VIDEO
	#include <bus_vcxk.h>

	extern unsigned long display_width;
	extern unsigned long display_height;
	#endif

	#ifdef CONFIG_CMD_NAND
	void cpux9k2_nand_hw_init(void);
	#endif

	DECLARE_GLOBAL_DATA_PTR;

	/*
	* Miscelaneous platform dependent initialisations
	*/

	int board_init(void)
	{
	at91_pio_t pio = (at91_pio_t ) ATMEL_BASE_PIO;

	/* Correct IRDA resistor problem / Set PA23_TXD in Output */
	writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);

	gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
	/* adress of boot parameters */
	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

	#ifdef CONFIG_STATUS_LED
	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
	#endif
	#ifdef CONFIG_CMD_NAND
	cpux9k2_nand_hw_init();
	#endif
	return 0;
	}

	int board_early_init_f(void)
	{
	at91_seriald_hw_init();
	return 0;
	}

	#ifdef CONFIG_MISC_INIT_R

	int misc_init_r(void)
	{
	uchar mac[8];
	uchar tm;
	uchar midx;
	uchar macn6, macn7;

	if (getenv("ethaddr") == NULL) {
	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00,
	CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
	(uchar *) &mac, sizeof(mac)) != 0) {
	puts("Error reading MAC from EEPROM\n");
	} else {
	tm = 0;
	macn6 = 0;
	macn7 = 0xFF;
	for (midx = 0; midx < 6; midx++) {
	if ((mac[midx] != 0) && (mac[midx] != 0xFF))
	tm++;
	macn6 += mac[midx];
	macn7 ^= mac[midx];
	}
	if ((macn6 != mac[6]) \|\| (macn7 != mac[7]))
	tm = 0;
	if (tm)
	eth_setenv_enetaddr("ethaddr", mac);
	else
	puts("Error: invalid MAC at EEPROM\n");
	}
	}
	gd->jt->do_reset = do_reset;

	#ifdef CONFIG_STATUS_LED
	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
	#endif
	return 0;
	}
	#endif

	#ifdef CONFIG_RESET_PHY_R
	void reset_phy(void)
	{
	udelay(10000);
	eth_init(gd->bd);
	}
	#endif

	/*
	* DRAM initialisations
	*/

	int dram_init(void)
	{
	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
	CONFIG_SYS_SDRAM_SIZE);
	return 0;
	}

	/*
	* Ethernet initialisations
	*/

	#ifdef CONFIG_DRIVER_AT91EMAC
	int board_eth_init(bd_t *bis)
	{
	int rc = 0;
	rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
	return rc;
	}
	#endif

	/*
	* Disk On Chip (NAND) Millenium initialization.
	* The NAND lives in the CS2* space
	*/
	#if defined(CONFIG_CMD_NAND)

	#define MASK_ALE (1 << 22) /* our ALE is AD22 */
	#define MASK_CLE (1 << 21) /* our CLE is AD21 */

	void cpux9k2_nand_hw_init(void)
	{
	unsigned long csr;
	at91_pio_t pio = (at91_pio_t ) ATMEL_BASE_PIO;
	at91_pmc_t pmc = (at91_pmc_t ) ATMEL_BASE_PMC;
	at91_mc_t mc = (at91_mc_t ) ATMEL_BASE_MC;

	/* Setup Smart Media, fitst enable the address range of CS3 */
	writel(readl(&mc->ebi.csa) \| AT91_EBI_CSA_CS3A, &mc->ebi.csa);

	/* RWH = 1 \| RWS = 0 \| TDF = 1 \| NWS = 3 */
	csr = AT91_SMC_CSR_RWHOLD(1) \| AT91_SMC_CSR_TDF(1) \|
	AT91_SMC_CSR_NWS(3) \|
	AT91_SMC_CSR_ACSS_STANDARD \| AT91_SMC_CSR_DBW_8 \|
	AT91_SMC_CSR_WSEN;
	writel(csr, &mc->smc.csr[3]);

	writel(ATMEL_PMX_CA_SMOE \| ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
	writel(ATMEL_PMX_CA_BFCK \| ATMEL_PMX_CA_SMOE \| ATMEL_PMX_CA_SMWE,
	&pio->pioc.pdr);

	/* Configure PC2 as input (signal Nand READY ) */
	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
	writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);

	/* PIOC clock enabling */
	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
	}

	static void board_nand_hwcontrol(struct mtd_info *mtd,
	int cmd, unsigned int ctrl)
	{
	at91_pio_t pio = (at91_pio_t ) ATMEL_BASE_PIO;
	struct nand_chip *this = mtd->priv;
	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;

	if (ctrl & NAND_CTRL_CHANGE) {
	IO_ADDR_W &= ~(MASK_ALE \| MASK_CLE);

	if (ctrl & NAND_CLE)
	IO_ADDR_W \|= MASK_CLE;
	if (ctrl & NAND_ALE)
	IO_ADDR_W \|= MASK_ALE;

	if ((ctrl & NAND_NCE))
	writel(1, &pio->pioc.codr);
	else
	writel(1, &pio->pioc.sodr);

	this->IO_ADDR_W = (void *) IO_ADDR_W;
	}
	if (cmd != NAND_CMD_NONE)
	writeb(cmd, this->IO_ADDR_W);
	}

	static int board_nand_dev_ready(struct mtd_info *mtd)
	{
	at91_pio_t pio = (at91_pio_t ) ATMEL_BASE_PIO;
	return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
	}

	int board_nand_init(struct nand_chip *nand)
	{
	cpux9k2_nand_hw_init();
	nand->ecc.mode = NAND_ECC_SOFT;
	nand->cmd_ctrl = board_nand_hwcontrol;
	nand->dev_ready = board_nand_dev_ready;
	nand->chip_delay = 20;
	return 0;
	}

	#endif

	#if defined(CONFIG_VIDEO)
	/*
	* drv_video_init
	* FUNCTION: initialize VCxK device
	*/

	int drv_video_init(void)
	{
	#ifdef CONFIG_SPLASH_SCREEN
	unsigned long splash;
	#endif
	char *s;
	unsigned long csr;
	at91_pmc_t pmc = (at91_pmc_t ) ATMEL_BASE_PMC;
	at91_mc_t mc = (at91_mc_t ) ATMEL_BASE_MC;

	printf("Init Video as ");
	s = getenv("displaywidth");
	if (s != NULL)
	display_width = simple_strtoul(s, NULL, 10);
	else
	display_width = 256;
	s = getenv("displayheight");
	if (s != NULL)
	display_height = simple_strtoul(s, NULL, 10);
	else
	display_height = 256;
	printf("%ld x %ld pixel matrix\n", display_width, display_height);

	/* RWH = 2 \| RWS =2 \| TDF = 4 \| NWS = 0x6 */
	csr = AT91_SMC_CSR_RWHOLD(2) \| AT91_SMC_CSR_RWSETUP(2) \|
	AT91_SMC_CSR_TDF(4) \| AT91_SMC_CSR_NWS(6) \|
	AT91_SMC_CSR_ACSS_STANDARD \| AT91_SMC_CSR_DBW_16 \|
	AT91_SMC_CSR_BAT_16 \| AT91_SMC_CSR_WSEN;
	writel(csr, &mc->smc.csr[2]);
	writel(1 << ATMEL_ID_PIOB, &pmc->pcer);

	vcxk_init(display_width, display_height);
	#ifdef CONFIG_SPLASH_SCREEN
	s = getenv("splashimage");
	if (s != NULL) {
	splash = simple_strtoul(s, NULL, 16);
	printf("use splashimage: %lx\n", splash);
	video_display_bitmap(splash, 0, 0);
	}
	#endif
	return 0;
	}
	#endif

	#ifdef CONFIG_SYS_I2C_SOFT

	void i2c_init_board(void)
	{
	u32 pin;
	at91_pmc_t pmc = (at91_pmc_t ) ATMEL_BASE_PMC;
	at91_pio_t pio = (at91_pio_t ) ATMEL_BASE_PIO;

	writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
	pin = ATMEL_PMX_AA_TWD \| ATMEL_PMX_AA_TWCK;
	writel(pin, &pio->pioa.idr);
	writel(pin, &pio->pioa.pudr);
	writel(pin, &pio->pioa.per);
	writel(pin, &pio->pioa.oer);
	writel(pin, &pio->pioa.sodr);
	}

	#endif

	/--------------------------------------------------------------------------/

	#ifdef CONFIG_STATUS_LED

	void __led_toggle(led_id_t mask)
	{
	at91_pio_t pio = (at91_pio_t ) ATMEL_BASE_PIO;

	if (readl(&pio->piod.odsr) & mask)
	writel(mask, &pio->piod.codr);
	else
	writel(mask, &pio->piod.codr);
	}

	void __led_init(led_id_t mask, int state)
	{
	at91_pmc_t pmc = (at91_pmc_t ) ATMEL_BASE_PMC;
	at91_pio_t pio = (at91_pio_t ) ATMEL_BASE_PIO;

	writel(1 << ATMEL_ID_PIOD, &pmc->pcer); /* Enable PIOB clock */
	/* Disable peripherals on LEDs */
	writel(STATUS_LED_BIT \| STATUS_LED_BIT1, &pio->piod.per);
	/* Enable pins as outputs */
	writel(STATUS_LED_BIT \| STATUS_LED_BIT1, &pio->piod.oer);
	/* Turn all LEDs OFF */
	writel(STATUS_LED_BIT \| STATUS_LED_BIT1, &pio->piod.sodr);

	__led_set(mask, state);
	}

	void __led_set(led_id_t mask, int state)
	{
	at91_pio_t pio = (at91_pio_t ) ATMEL_BASE_PIO;
	if (state == STATUS_LED_ON)
	writel(mask, &pio->piod.codr);
	else
	writel(mask, &pio->piod.sodr);
	}

	#endif

	/---------------------------------------------------------------------------/

	int do_brightness(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	int rcode = 0;
	ulong side;
	ulong bright;

	switch (argc) {
	case 3:
	side = simple_strtoul(argv[1], NULL, 10);
	bright = simple_strtoul(argv[2], NULL, 10);
	if ((side >= 0) && (side <= 3) &&
	(bright >= 0) && (bright <= 1000)) {
	vcxk_setbrightness(side, bright);
	rcode = 0;
	} else {
	printf("parameters out of range\n");
	printf("Usage:\n%s\n", cmdtp->usage);
	rcode = 1;
	}
	break;
	default:
	printf("Usage:\n%s\n", cmdtp->usage);
	rcode = 1;
	break;
	}
	return rcode;
	}

	/---------------------------------------------------------------------------/

	U_BOOT_CMD(
	bright, 3, 0, do_brightness,
	"bright - sets the display brightness\n",
	" <side> <0..1000>\n side: 0/3=both; 1=first; 2=second\n"
	);

	/* EOF cpu9k2.c */